Water, Sewer & Drain Fittings
|
|
|
- Jacob Neal
- 6 years ago
- Views:
Transcription
1 Why Compact? Compact Joint are manufactured from a high strength, impact resistant ductile iron that offers a great margin of safety against service failures and provides vastly increased resistance to breakage caused by rough handling during shipment and installation. Compact fittings are manufactured from ductile iron with a minimum tensile strength of 70,000 psi, minimum yield of 50,000 psi and minimum elongation of 5%. This compares to a minimum tensile strength of 25,000 psi in gray iron fittings. Compact fittings offer a lighter, more economical fitting capable of withstanding high internal pressures and heavy external loading. Cost effective performance is assured with fittings having a minimum wall thickness equal to class 54 ductile iron pipe in sizes 3" to 12" and class 56 ductile iron pipe in sizes 14" to 24". All compact ductile iron fittings have a working pressure rating of 350 psi. 3" through 12" mechanical joint ductile iron fittings are produced in strict accordance with all applicable terms and provisions of ANSI/AWWA C-153/A " through 24" are manufacturer's standards and are produced to the intent of ANSI/AWWA C-153/A Compact ductile iron fittings are produced with full flow diameters and are designed for use with modern ductile iron pipe. The resulting benefits are reduced head loss and lower pumping costs. Fitting Assembly Clean bell and plain end and lubricate gasket with pipe 1. lubricant. The joint area must be free of dirt. Slip gasket into position assure even seating in the 2. bell. 3. When gland is in position, insert bolts and partially tighten with fingers. Tighten bolts to the normal range of bolt torque [75-90 ft pounds] while maintaining approximately the same distance between the gland and the face of the socket. A proper joint is accomplished by partially tightening the bottom bolt first then the top bolt, next the bolts at either side, and finally the remaining bolts. Repeat this process until all bolts are within the appropriate range of torque.
2 -1 Joint Class 350 joint ductile iron fittings are cement lined. They conform to AWWA C-153, latest edition. Ductile iron fittings combined with ductile iron pipe create an almost failure proof water system. The lighter weight, higher pressure rating and increased strength make these fittings labor saving and economical. SHORT SPEC: joint compact fittings shall be ductile iron class 350 and shall be produced in strict accordance with ANSI/ AWWA A21.53/C-153 and ANSI/AWWA A21.11/C-111 for joints and ANSI/AWWA A21.4/C-104 for cement lining in sizes 3" through 24". joint nuts and bolts shall be Corten or, high strength, low alloy steel per ANSI/AWWA A21.11/C-111. M L X 7 28 S T 0.75 in in in. 2 K 2 J D C F A K1 Joint Dimensions (in inches) A C D F DIA J K NOTE: Actual fitting weights may vary slightly from those listed on pages -2 thru -8. Each manufacturer uses slightly different weights. Weights shown are an average. K2 L M S T X OLT NO. -1
![-2 Joint Class 350 DI ends 1/4 end [90 ] 1/16 end [22½ ] WEIGHT 3" 20 33101 4" 26 33175 6" 48 33400 8" 68 33660 10" 107 33945 12" 141 34245 14" 220 34580 16" 264 34705 1 18" 410 34811 20" 505 34916](/docs-images/73/68616105/images/3-0.jpg "24\" 695 35016 WEIGHT 3\" 15 33109 4\" 21 33200 6\" 37 33425 8\" 51 33680 10\" 67 33965 12\" 80 34265 14\" 148 34591 16\" 179 34715 1 18\" 292 34821 20\" 364 34926 24\" 460 35026 1/8 end [45 ] WEIGHT 3\" 16 33104")
![4" 22 33190 6" 38 33410 8" 59 33670 10" 81 33955 12" 111 34255 14" 164 34586 16" 202 34710 1 18" 289 34816 20" 348 34921 24" 475 35021 add 600D After the Product 1/32 end [11¼ ] WEIGHT 3" 15 33114 4"](/docs-images/73/68616105/images/3-1.jpg "20 33210 6\" 33 33435 8\" 48 33690 10\" 61 33975 12\" 79 34275 14\" 131 34592 16\" 159 34720 1 18\" 292 34826 20\" 377 34931 24\" 457 35031 NOTES: MJ by plain end bends are available as special order items.")
3 -2 Joint Class 350 DI ends 1/4 end [90 ] 1/16 end [22½ ] WEIGHT 3" " " " " " " " " " " WEIGHT 3" " " " " " " " " " " /8 end [45 ] WEIGHT 3" " " " " " " " " " " add 600D After the Product 1/32 end [11¼ ] WEIGHT 3" " " " " " " " " " " NOTES: MJ by plain end bends are available as special order items. Fitting weights listed do not include mechanical joint -2
4 -3 Joint Class 350 DI Tees WEIGHT WEIGHT 3" 3" " 14" " 3" " 16" " 4" " 6" " 4" " 8" " 6" " 10" " 4" " 12" " 6" " 14" " 8" " 16" " 4" " 18" " 6" " 6" " 8" " 8" " 10" " 10" " 4" " 12" " 6" " 14" " 8" " 16" " 10" " 18" " 12" " 20" " 6" " 6" " 8" " 8" " 10" " 10" " 12" " 12" " 14" " 14" " 4" 224 NA 24" 16" " 6" " 18" " 8" " 20" " 10" " 24" " 12" NOTES: joint tees are also available as reducing run tees. Call your local Team EJP sales office for prices and availability. Fo r f o r e i g n Me c h a n i c a l Joint Fitting weights listed do not include mechanical joint add 600D After the Product -3
5 -4 Joint Class 350 DI Hydrant Tees and Solid & Dual Sleeves MJ Hydrant Tees Our ductile iron Hydrant Tee provides positive restraint to mechanical joint valves or fittings attached to the branch. Tie rodding is eliminated. The rotating split anchor gland allows connection at any grade or bolt hole alignment. WEIGHT 6" 6" " 6" " 6" " 6" " 6" " 6" " 6" " 6" " 6" notes: Transition gaskets can be used with Solid Sleeves for connecting ductile iron to steel pipe or steel O.D. PVC pipe in sizes 3" thru 12" and for connecting SDR 35 sewer pipe in sizes 4" thru 12". Order from Page -13. Fitting weights listed do not include mechanical joint SHORT SPEC: joint compact fittings shall be ductile iron class 350 and shall be produced in strict accordance with ANSI/ AWWA A21.53/C-153 and ANSI/AWWA A21.11/C-111 for joints and ANSI/AWWA A21.4/C-104 for cement lining in sizes 3" thru 24". joint nuts and bolts shall be Corten or, high strength, low alloy steel per ANSI/AWWA A21.11/C-111. add 600D After the Product MJ Solid Sleeve MJ Dual Sleeve (with oversized glands) MJ Solid Sleeves LENGTH MJ Dual Sleeves 3" 21 12" " " " 25 12" " " " 39 12" " " " 53 12" " " " 64 12" " " " 82 12" " " " " " " " " " " " " O.D. RANGE Length 4" " " " " " " " " " " " " " "
6 -5 Joint Class 350 DI Reducers MJ X MJ MJ X LE MJ X SE MJ X MJ MJ X LE MJ X SE 4" 3" " 4" " 4" " 6" " 4" " 6" " 8" " 4" " 6" " 8" " 10" " 6" " 8" " 10" " 12" " 6" " 8" " 10" " 12" " 14" " 6" " 8" " 10" " 12" " 14" " 16" " 6" " 8" " 10" " 12" " 14" " 16" " 18" " 10" NA " 12" " 14" " 16" " 18" " 20" NOTE: Some sizes and configurations shown are non-stock and require special ordering. Call your local Team EJP sales office for information. Weights do not include -5
7 -6 Joint Class 350 DI Wyes & Crosses MJ Wyes wt. 3" 3" " 3" " 4" " 4" " 6" " 4" " 6" " 8" " 4" " 6" " 8" " 10" " 4" " 6" " 8" " 10" " 12" " 6" 256 NS 14" 8" 286 NS 14" 10" 322 NS 14" 12" 387 NS 14" 14" " 6" " 8" " 10" 375 NS 16" 12" " 14" 492 NS 16" 16" NOTE: Fitting weights listed do not include mechanical joint NS means non stock. Non-stock items are nonreturnable and noncancelable. add 600D After the Product MJ Crosses wt. 3" 3" 33 NS 4" 3" 38 NS 4" 4" " 4" " 6" " 4" 84 NS 8" 6" " 8" " 4" " 6" " 8" " 10" " 4" " 6" " 8" " 10" " 12" " 6" " 8" " 10" " 12" " 14" " 6" " 8" " 10" " 12" " 14" 363 NS 16" 16" SHORT SPEC: joint compact fittings shall be ductile iron class 350 and shall be produced in strict accordance with ANSI/ AWWA A21.53/C-153 and ANSI/AWWA A21.11/C-111 for joints and ANSI/AWWA A21.4/C-104 for cement lining in sizes 3" through 24". joint nuts and bolts shall be Corten or, high strength, low alloy steel per ANSI/AWWA A21.11/C
8 -7 Joint Class 350 DI Caps & Plugs MJ Caps solid tapped (2") product number product number 3" " " " " " " NS 16" " " " add 600D After the Product MJ Plugs solid tapped (2") product number product number 3" " " " " " " " " " " NOTES: Standard tap size on caps and plugs is 2" IPS thread. Other tap sizes available by special order. Fitting weights listed do not include mechanical joint -7
9 -8 Joint Push-In Plugs Push-In Plugs With Ears Push-In Plugs With Setscrews Push-in plugs can be used with ell-tite, All-Tite, Grip-Tite, Fastite and Tyton Pipe. Taps are 2" standard. SOLID TAPPED (2") 3" " " " " " " 102 NS 102 NS 16" " 180 NS 180 NS 20" " 325 NS add 600D After the Product SOLID TAPPED (2") 3" 8 NS 8 NS 4" " " " " " 102 NS 102 NS 16" 144 NS 144 NS 18" 180 NS 180 NS 20" NS 24" NS notes: NS items are non-stock; please call your local Team EJP sales office for price and availability. Push-In Plugs are made to AWWA standards. Push-In Plugs do not include gaskets. -8
TABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
Utilities Catalog. PC-U2008, February, 2008
Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page
UNION-TITE DUCTILE IRON C153 COMPACT FITTINGS
Sizes 4"-12" UL Listed for Fire Main Equipment SAMPLE SPECIFICATIONS (Current ANSI/AWWA revisions apply) 4" through 24" Push-On joint ductile iron fittings shall be produced in accordance with all applicable
SECTION 5 AMERICAN. Ductile Iron Mechanical Joint Fittings
ECION 5 AMERICAN Ductile Iron Mechanical Joint Fittings he principal standards covering full body mechanical joint fittings are ANI/AWWA C110/A21.10 and ANI/AWWA C111/A21.11. Compact ductile iron fittings
TYLER UNION. Quality Waterworks Products. PC-2017, March, REGISTERED FIRMISO 9001:2015. Tyler Union
TYLER UNION Quality Waterworks Products WATERWORKS CATALOG PC-2017, March, 2017 www.tylerunion.com 10014257 U L REGISTERED FIRMISO 9001:2015 CERTIFIED Tyler Union 11910 CR 492 TYLER, TEXAS 75706 (800)
PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe
Joint Restraint Products PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe INFORMATION The PVC Stargrip Mechanical Joint Restraint System is a unique product with
PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe
PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe INFORMATION The PVC Stargrip Mechanical Joint Restraint System is an exceptional restraint system for mechanical
TYLER UNION IMPORT RESTRAINTS LP NR
SERIES 1000 MJ TUFGRIP WEDGE TYPE RESTRAINT FOR DUCTILE IRON PIPE MJ TUFGRIP for DI Pipe - GLAND ONLY N70-5760 MJ TUFGRIP for DI Pipe - W/ ACCESSORIES N71-6795 3 113805 $42.94 7 150 3 114352 $65.05 10
Section 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
San Antonio Water System Standard Specifications for Construction ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS
ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS 836.1 DESCRIPTION: This item shall consist of grey-iron and ductile-iron fittings installation and adjustment installed in accordance with these specifications
PIPE OUTSIDE DIAMETER GUIDE
June 7, 2018-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE &
San Antonio Water System Standard Specifications for Construction ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS
ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS 836.1 DESCRIPTION: This item shall consist of grey-iron and ductile-iron fittings installation and adjustment installed in accordance with these specifications
Price List Import Restraints
LP2016-NR Effective: February 1, 2016 Supersedes All Previous Pricing Import Restraints For Other Products See: LP2015-ND - Import Utility Fittings, Glands, Accessory Packs LP2015-D - Domestic Utility
C909 PVC Pipe Patent Pending
1113 - H Copyright 2011 EBAA Iron, Inc. All Rights Reserved 19MJ00 Mechanical Joint Restraint for 4 through 12 inch C909 PVC Restraints for C909 PVC Pipe Patent Pending Features and Applications: For use
Section 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
INFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE:
INFACT CORPORATION WATERWORKS PRODUCTS SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DATA / PRODUCT CHECKLIST EASY-TO-INSTALL SPACE-SAVING RESTRAINT
Super Flange series 7200 Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes
Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes INFORMATION The Series 7200 Super Flange is a restrained flange adapter designed to connect plain end pipe to a flange end component. May
2009 Edition. Tyton fittings 14"-24" NSF. For Water & Wastewater, Fire Protection & Industrial Applications. Certified to ANSI/NSF 61
14"-24" Tyton fittings For Water & Wastewater, Fire rotection & Industrial Applications 2 Table of Contents TYTON Fittings 3 Assembly of TYTON Fittings 4 Bell Dimensions 6 Thickness and Dimensions 90 Bends
Ford Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
Rated to the New, Higher Pressure Classes in Latest Editions of AWWA C900 and C909. Joint Restraint Products
Pipe Restrainers series 1000G2 1000G2C Restrainers for AWWA CI OD C900/C909 PVC/PVCO Pipe with MJ or Ductile Iron Push-On Fittings (Formerly Series 9000) INFORMATION Second Generation (Gen 2) PVC Restrainers
Ford Bolted Flex Couplings. Section M. 5/2008; Web Revision 10/2010
Section M 5/2008; Web Revision 10/2010 Ford Bolted Flex Couplings The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487
ALPHA Wide Range Restrained Joint
ROMAC INDUSTRIES, INC. 1-800-426-9341 www.romac.com MADE IN U.S.A. January 8, 2015 ALPHA Wide Range Restrained Joint WIDE RANGE RESTRAINED JOINT Wide covers DI through IPS PVC pipe diameters without having
According to AWWA-standard
According to -standard Water Fire fighting - UL/FM 304 Gate valves - Cast iron 320 Gate valves OS&Y 306 Service connection valves 322 Post indicators 306 Combi valves 307 Gate valves - 310 Gate valves
516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
327 Introduction An integral part of any pipe system is the method used to join the system components. Proper engineering design of a system will take into consideration the type and effectiveness of the
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
IROn PIPe. McWane DUcTILe
McWane DUcTILe IROn PIPe nsf 61 ISO 9001 DIPRa Boltless restrained joint systems Multiple design options available from 3 36 Fast and easy installation 350 pressure rating Independently tested www.mcwane.com
TAPPING & SERVICE SADDLES
TAPPING & SERVICE SADDLES The Standard of Excellence in the Industry CS12 CSC1 CS22 CSC2 CNS1 CDS1 CNS2 CDS2 CFS CFT-TO 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630)
Flexible Couplings & Saddles
Revised 6/01 Flexible Sewer couplings are the result of many years of experience with sewer pipe connections. Today's couplings are made of specially formulated elastomeric PVC with high tear and shear
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
Ford Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
866.DIP.PIPE P 1 NSF Edition. Certified to ANSI/NSF Edition 4" 36" REVISED 11.09
P 1 4" 36" For FIRE PROTECTION, Water & Wastewater P 2 Table of Contents TR FLEX Restrained Joint Pipe and Fittings 4"-36" 3 Suggested Specification Wording For 4"-36" Restrained Push-on Joint Pipe and
Cam-Lock 111, 120 Joint Restraints Patent Pending
111, 120 Joint Restraints The Next Generation Joint Restraint Technology Smith-Blair Cam-Lock joint restraint products provide a fast and economical means restraining mechanical joint water and wastewater
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS 834.1 DESCRIPTION: This item shall consist of fire hydrant installations using joint restraints in accordance
Price List. Customer Service Support
LP2019-BNG Effective: Supersedes All Previous Pricing Price List Bolts, Nuts, Gaskets & Accessory Packs (Less Glands) For Other Products See Latest Versions of: ND - Import Utility Fittings, Glands, Accessory
RESTRAINED JOINT HP LOK 30" 64" RESTRAINED JOINT NSF WATER & WASTEWATER. Certified to ANSI/NSF 61
2 0 1 6 30" 64" E D I T I O N NSF WATER & WASTEWATER NSF P 2 Table of Contents Restrained Joint Pipe and Fittings 30" 64" 3 Suggested Specifications for Restrained Push-On Joint Pipe and Fittings 4 Joint
Steel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
The Number One Choice of Line Stopping Contractors
JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines
Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect
PIPE REPAIR PRODUCTS REPAIR CLAMPS
PIPE REPAIR PRODUCTS REPAIR CLAMPS The Standard of Excellence in the Industry 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630) 553-0181 www.cascademfg.com 2007-2015
visit us online at
PRICE SHEET (PL-1014-VLV Replaces PL-0513-VLV) TABLE OF CONTENTS VALVES & HYDRANTS Page(s) Product Line Price Sheet 1 AWWA C515 Gate Valves NRS Series 2010 & 1010 PL-1014 Multiplier 2 AWWA C515 Gate Valves
JCM 101 Universal Clamp Couplings
JCM 1 Universal Clamp Couplings JCM 1 Universal Clamp Coupling - Single Band JCM Universal Clamp Couplings provide a full circumferential seal and wide range for the permanent repair or reconnection of
FIRE PROTECTION PRODUCTS
SUPER CENTURION FIRE HYDRANT Mueller Super Centurion Fire Hydrant Since its introduction in 1976, millions of Centurion fire hydrants have been installed throughout North America. There are a number of
UNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
Smith-Blair OMNI Coupling System Advantages:
OMNI Coupling System SmithBlair s OMNI Coupling System utilizes the tremendous tensile strength of ductile iron to your best advantage. Applying the principles of space age technology to engineer the OMNI
VALVES, FIRE HYDRANTS, AND APPURTENANCES
VALVES, FIRE HYDRANTS, AND APPURTENANCES PART 1 - GENERAL 1.01 SECTION INCLUDES A. Butterfly Valves B. Gate Valves C. Tapping Valve Assemblies D. Fire Hydrant Assemblies E. Flushing Devices (Blowoffs)
3"-42" FLANGE-TYTE II TM FULL FACE GASKET FOR FLANGED JOINTS 2016 EDITION FOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONS
TM FOR FLANGED JOINTS 3"-42" Certified to ANSI/NSF 61 FOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONS Table of Contents FULL FACE TM Gasket Introduction 3 Pressure Performance 3 Torque
UNITED BRAND FITTINGS
NFF0711 UNITED DUCTILE IRON CLASS 0 FLANGED FITTINGS UNITED BRAND FITTINGS AWWA C1, ANSI A21. Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality
PRESSURE UTILITIES. Pipe flow occurs due to contents of the pipe being pressurized System cannot have a free connection to the atmosphere
PRESSURE UTILITIES Pipe flow occurs due to contents of the pipe being pressurized System cannot have a free connection to the atmosphere Types of Pressure Utilities Domestic Water: Clean/drinkable water
Ford Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
Precision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products
DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS 834.1 DESCRIPTION: This item shall consist of fire hydrant installations using joint restraints in accordance
CASING SPACERS DESIGNED FOR WATER, SEWER, OIL & GAS
CASING SPACERS DESIGNED FOR WATER TER,, SEWER,, OIL & GAS The BWM Company P.O. Box 1 Forest City, North Carolina 2803 Phone: 828.27.030 Toll Free 8 5 SPACER Fax: 828.25.59 www.bwmcompany.com BWM will provide
P EDITION 4" 36" FOR FIRE PROTECTION, WATER & WASTEWATER REVISED 07.14
P 1 2014 EDITION 4" 36" FOR FIRE PROTECTION, WATER & WASTEWATER P 2 Table of Contents TR FLEX Restrained Joint Pipe and Fittings 4"-36" 3 Suggested Specification Wording For 4"-36" Restrained Push-on Joint
Series 1500TD Bell Restraint Harness for Ductile Iron & C900 PVC Pipe Split Serrated Restraint Rings on Both Sides of the Bell
Series 00TD Bell Restraint Harness for Ductile Iron & C900 PVC Pipe Split Serrated Restraint Rings on Both Sides of the Bell Features and Applications: Restraint for Ductile Iron Pipe at Push- On Bells,
Joint Restraint System
Joint Restraint System For IPS, DPS & DIN Plastic Pipe 10-YEAR Warranty Parts & Labor ask for details PIPE TO FITTING LH-Series 2-12 IPS Pipe s LHD-Series 4-24 DPS Pipe s DLH-Series 63-400MM DIN Pipe s
Ford Service Saddles and Tapping Sleeves
Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171
HDPE HIGH DENSITY POLYETHYLENE PRODUCTS
HDPE HIGH DENSITY POLYETHYLENE PRODUCTS The Standard of Excellence in the Industry CPS-IPS PECST-SL PECR1 PECR2 PECS- PECS-22 PECSC-1 PECSC-2 CERTIFIED TO NSF/ANSI 1 13 BADGER STREET YORKVILLE, ILLINOIS
FABRICATION TR Flex Pipe & Fittings DUCTILE IRON
PIPE FABRICATION TR Flex Pipe & Fittings DUCTILE IRON RESTRAINED JOINTS FITTINGS GASKETS COATINGS & LININGS CONTENTS GENERAL INFO Pipe 4" 36" 2 Suggested Specification Wording 3 ASSEMBLY INSTRUCTIONS Pipe
TR Flex Pipe & Fittings DUCTILE IRON
TR Flex Pipe & Fittings DUCTILE IRON PIPE FABRICATION RESTRAINED JOINTS FITTINGS GASKETS COATINGS & LININGS CONTENTS GENERAL INFO Pipe 4" 36" 2 Suggested Specification Wording 3 ASSEMBLY INSTRUCTIONS Pipe
Ductile and Cast Iron Flanged Fittings Metalfit
Ductile and Cast Iron Flanged Fittings 2 48 Metalfit Flanged oint Dimensions NSI/WW C110/21.10 BC OD Size OD BC ole Dia. Bolt Size No. Bolts 2 6.00 4.75 0.62 0.75 5/8 x 2-1/4 4 2-1/2 7.00 5.50 0.69 0.75
C110 DUCTILE IRON FLANGED FITTINGS
C110 DUCTILE IRON FLANGED FITTINGS SIZES: 2-64 C110 DUCTILE IRON FLANGED FITTINGS BASIC SPECIFICATIONS MATERIAL: Ductile Iron ASTM A536 Grade 60-42-10, 65-45-12 or 70-50-05. PRESSURE: 250 PSI Water Working
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION WATER DISTRIBUTION VALVES
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION 33 12 16 WATER DISTRIBUTION VALVES PART 1 GENERAL... 2 1.1 Description... 2 1.2 Reference Specifications, Codes, and
' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts
.., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED
Section M. 04/2014 Web Revision 10/02/2015. Ford Bolted Flex Couplings
THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section M 04/2014 Web Revision 10/02/2015 Ford Bolted Flex Couplings Contents Coupling Numbering System... 3 Features of Ford Cast Couplings, Style
PVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
PVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
E2 valve - BAIO socket-socket For ductile iron, steel, PE and PVC pipes, PN 16 Page G 3/1
HAW - BAIO SYSTM The easy and time-saving solution Page G 2 HAW - BAIO SYSTM The fastest connection in the pipeline system Page G 2/1 Accessories Page G 2/2 Page G 3 2 valve - BAIO socket-socket For ductile
F L A C110 FLANGED FITTINGS CAST IRON & DUCTILE IRON 2007 Sigma Corporation, All Rights Reserved
F L A C110 & N GE D 2-54 / BASIC SPECIFICATIONS www.sigmaco.com / MATERIAL: Cast Iron: ASTM A48, Grade 25B (2-14 ) / Grade 30B (16-54 ) Ductile Iron ASTM A536 PRESSURE: 250 PSI Water Working Pressure for
GENERAL FEATURES / SPEC M&H AWWA C502 FIRE HYDRANTS Style 929 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approval Type: Compression type, opening against line pressure.
INFACT CORPORATION WATERWORKS PRODUCTS FOSTER ADAPTOR SPECIFICATION S TOLL FREE:
INFAC CORPORAION WAERWORKS PRODUCS FOSER ADAPOR SPECIFICAION S O FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DAA / PRODUC OVERVIEW FOSER ADAPOR BO-HRU MECHANICA JOIN RESRAIN
MaxiFit. High Tolerance Mechanical Pipe Fittings. World leaders in pipe joint, repair & flow control products
World leaders in pipe joint, repair & flow control products The Viking Johnson range of MaxiFit universal pipe couplings represents the very latest in mechanical pipe coupling technology. MaxiFit products
FABRICATION TR Flex Pipe & Fittings DUCTILE IRON
PIPE FABRICATION TR Flex Pipe & Fittings DUCTILE IRON RESTRAINED JOINTS FITTINGS GASKETS COATINGS & LININGS CONTENTS GENERAL INFO Pipe " " Suggested Specification Wording ASSEMBLY INSTRUCTIONS Pipe & Fittings
APPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17**
APPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17** SIZE DESCRIPTION MANUFACTURER & MODEL NUMBER CORPORATION STOPS 1" MIP x GRIP Comp ball corp stop Ford: FB 1100-4Q McDonald: 74704-BQ
229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
HP250II AND HP250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901
H250II AND H250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS RATT H250II Scope of Line... 1 Design and Construction Details... 1 ipe Mating Chart... 1
HP LOK Pipe & Fittings DUCTILE IRON
HP LOK Pipe & Fittings DUCTILE IRON PIPE FABRICATION RESTRAINED JOINTS FITTINGS GASKETS COATINGS & LININGS CONTENTS GENERAL INFO Pipe and Fittings 30" 64" 2 Suggested Specifications 3 ASSEMBLY INSTRUCTIONS
Service Materials. Service Materials. With Three Locations to Serve You: Avoca, NY 8125 Kanona Rd. Avoca, NY (607)
Service Materials Service Materials Rochester, NY 785 Beahan Rd. Rochester, NY 14624 (585) 436-9624 With Three Locations to Serve You: Avoca, NY 8125 Kanona Rd. Avoca, NY 14809 (607) 566-2214 Watertown,
DUCTILE IRON PIPE DESIGN
4"-64" FOR FIRE ROTECTION, WATER & WASTEWATER 866.DI.IE 2 Table of Contents Ductile Iron ipe 3 Laying Conditions 5 Design Method and Examples of Selection Method 6 ressure Class 10 Thickness Class 11 Earth
Terms and Conditions of Sale
Terms and Conditions of Sale (1) GENERAL All orders and contracts are subject to acceptance by JCM Industries, Inc. at Nash, Texas. The terms as hereinafter written shall supersede the terms of the customer
Mueller Super Centurion 250 Fire Hydrant
Mueller Super Centurion 250 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 250 Fire Hydrant...250 psig rating, high flow, dependable performance,
Section M. 06/2017 Web Revision 12/15/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Cast Couplings and Adapters
DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section M 06/2017 Web Revision 12/15/2017 Ford Cast Couplings and Adapters Contents Page Coupling Numbering System.... 3 Features
MaxiFit. Wide Tolerance Range Mechanical Pipe Fitting Technology. Universal. Includes. Plus. Pioneers in pipe solutions
Universal MaxiFit Wide Tolerance Range Mechanical Pipe Fitting Technology NOW Includes MaxiFit Plus Easier to fit Reduces installation costs Pioneers in pipe solutions MaxiFit Overview A Versatile Solution
THOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally
JCM PRICE LIST EFFECTIVE SEPTEMBER 1, 2017
JCM PRICE LIST EFFECTIVE SEPTEMBER 1, 2017 To Our JCM Customers, Enclosed is the updated JCM price list effective September 1, 2017. The increase ranges 4 5% on standard catalog pipe products and % on
Pipe Restraint Products Price List
Pipe Restraint Products Price List Effective February 2, 2015 IMPORTS SIGMA Corporation 700 Goldman Drive Cream Ridge, NJ 08514 800 999 2550 p www.sigmaco.com 609 758 1163 f crm-sales@sigmaco.com SIGMA
Pipe Restraint Products Price List
Pipe Restraint Products Price List Effective February 10, 2014 IMPORTS SIGMA Corporation 700 Goldman Drive Cream Ridge, NJ 08514 800 999 2550 p www.sigmaco.com 609 758 1163 f crm-sales@sigmaco.com SIGMA
1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED HIGH DENSITY POLYETHYLENE PIPE
Effective May 24, 2002 Cancels all previous publications U.S. Price $12.95 FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED FOR HIGH DENSITY POLYETHYLENE PIPE JCM Industries, Inc. P.O. Box 1220 Nash,
The applicable material specifications for ductile iron and rubber gaskets apply:
72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures
AMERICAN FLOW CONTROL 5 1/4 B-62-B-5 FIRE HYDRANT
AMERICAN FLOW CONTROL 5 1/4 B-62-B-5 FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available UL Listed and Approved by FM Approvals in applicable configurations. ONE-PIECE BRONZE
AMERICAN FLOW CONTROL 5 1/4 B-84-B-5 FIRE HYDRANT
AMERICAN FLOW CONTROL 5 1/4 B-84-B-5 FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available Listed by Underwriters Laboratories, Inc. and Approved by FM Approvals in applicable configurations.
Available End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
Water Distribution Solutions
Water Distribution Solutions Table of Contents WaterMaster 5CD250 Fire Hydrants 6 WaterMaster 5BR250 Fire Hydrants 8 FlowMaster Resilient Wedge Gate Valves 11 Valve Boxes 17 Meter Boxes 22 Table of Contents
SDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI) MINIMUM WALL (IN.) 20 LENGTH. 1.5" 1.900" N/A N/A N/A.090" ".419 lbs..415 lbs.
u ASTM D2241 PRESSURE PIPE Gasketed Pipe Specifications Northern Pipe Products ASTM D2241 IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784.
PRICES EFFECTIVE JULY 1, 2017 (REPLACES CATALOG DATED, APRIL 30, 2012)
PRICES EFFECTIVE JULY 1, 2017 (REPLACES CATALOG DATED, APRIL 30, 2012) REPAIR CLAMPS COUPLINGS SERVICE SADDLES SEWER PRODUCTS TAPPING SLEEVES RESTRAINT SYSTEMS HDPE PIPE PRODUCTS DRILLING & TAPPING EQUIPMENT
Product Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building