Hydraulic Surface Grinder Control Valve
|
|
|
- Domenic Miller
- 5 years ago
- Views:
Transcription
1 Hydraulic Surface Grinder Control Valve Mechanically Operated Direction Valve Solenoid ilot Operated Directional Valve Double Way-hrottle Control Valve For Dresser Mounted on Wheel Head hrottle Control Valve Control Shaft
2
3 Contents Hydraulic Surface Grinder Control Valve Mechanically Operated Direction Valve 20, , , Solenoid ilot Operated Directional Valve SOL SOL SOL Double Way-hrottle Control Valve V V V For Dresser Mounted on Wheel Head DMOW hrottle Control Valve SOL-04V Control Shaft CS Contents 03
4 Hydraulic Surface Grinder Control Valve > Mechanically Operated Direction Valve 20, 1224 MODEL SEC. Max. ressure ( ) /8" /8" Ø9 8 8 ER 1: o djust he Speed of able /8 2 - Screws for Shock bsorber Ø15 Ø ER 1: M8 x 1.25 M6 x 1.0 Depth20 o Change he Direction of able M6 x 1.0 Depth djust he Distance of Shock bsorber 04 20,
5 Hydraulic Surface Grinder Control Valve > Mechanically Operated Direction Valve 1632 MODEL SEC. Max. ressure ( ) /2" Ø9 o djust he Speed of able ER 1: 4-1/2 Screws for Shock bsorber Ø ER 1: /16 W-18 1/4 W-20 Depth20 1/4 W-20 Depth20 o Change he Direction of able 2 - djust he Distance of Shock bsorber
6 Hydraulic Surface Grinder Control Valve > Mechanically Operated Direction Valve 2040, 2448 DR MODEL SEC. Max. ressure ( ) 2040, /4" /8 W / ER 1: 3 - Screws for Shock bsorber 1/4 W-18 Depth djust he Distance of Shock bsorber o Change he Direction of able 67 Ø o djust he Speed of able ER 1: 12. Mounted Screws : 4-5/16 W /4 : 3/4 * 3/4 H ,
7 Hydraulic Surface Grinder Control Valve > Mechanically Operated Direction Valve 1512, 2012 DR MODEL SEC. Max. ressure ( ) 1512, " 43.8 aylor Made /4" Screws for Shock bsorber 2 - djust he Distance of Shock bsorber 1/4 W-20 o Change he Direction of able Mounted Screws : 4-3/8 W-16 ER 1: : 1 * 1 H o djust he Speed of able 1/4 W-20 ER 1: ,
8 Hydraulic Surface Grinder Control Valve > Solenoid ilot Operated Directional Valve SOL-04 a b X Y MODEL SEC. Max. ressure ( ) SOL /2" 11.3 SOL-06-18Ø /4" djust he Distance of Shock bsorber M5 0.8 a b SOL-04 : 2-1/2 SOL-06-18Ø : 2-3/4 2-1/4" SOL-04 : 2-1/2 SOL-06-18Ø : 2-3/4 Y X Screws for Shock bsorber M SOL-04
9 Hydraulic Surface Grinder Control Valve > Solenoid ilot Operated Directional Valve SOL-06 a b X Y MODEL SEC. Max. ressure ( ) SOL-06-25Ø /4" 14.3 SOL-06-32Ø ", 3/4" djust he Distance of Shock bsorber 4 - M Screws for Shock bsorber SOL-06-25Ø = 2-3/4 SOL-06-32Ø = / Y X SOL-06-25Ø = 32 SOL-06-32Ø = M /4 SOL-06-25Ø = 116 SOL-06-32Ø = SOL-06 09
10 Hydraulic Surface Grinder Control Valve > Solenoid ilot Operated Directional Valve SOL-08 a b MODEL SEC. Max. ressure ( ) SOL " 24.4 aylor Made /4" Mounted Screws : 4 - Ø9 Ø13.5 Depth Screws for Shock bsorber djust he Distance of Shock bsorber SOL-08
11 Hydraulic Surface Grinder Control Valve > Double Way-hrottle Control Valve V MODEL SEC. Max. ressure ( ) V /2" M /2 2 - M On Off M Ø26 Ø55 Speed Up he able Speed Speed Down he able Speed 2-1/ V
12 Hydraulic Surface Grinder Control Valve > Double Way-hrottle Control Valve V MODEL SEC. Max. ressure ( ) V /4" M / M Ø32 Ø On Off 4 - M Speed Up he able Speed Speed Down he able Speed / V--06
13 Hydraulic Surface Grinder Control Valve > Double Way-hrottle Control Valve V MODEL SEC. Max. ressure ( ) V " 9.1 On Off Mounted Screws : 4 - Ø9 Ø13.5 Depth Ø Ø Ø V
14 Hydraulic Surface Grinder Control Valve > For Dresser Mounted on Wheel Head DMOW MODEL SEC. Max. ressure ( ) DMOW 40 1/8" /8 2-1/4 W-20 Direction o djust he Speed of able 14 DMOW
15 Hydraulic Surface Grinder Control Valve > hrottle Control Valve SOL-04V 2 1 MODEL SEC. Max. ressure ( ) SOL-04V /2" / /4 W-20 Depth /16 W / /16 W Ø /2 SOL-04V 15
16 Hydraulic Surface Grinder Control Valve > Control Shaft CS Ø M (5/16"W-18) 14 Ø Ø15 Ø8 M (5/16"W-18) Ø Ø48 Ø60 Ø15 Ø6. aper 1: 4 Ø Cross-sectional View - 16 CS
17
18
19
20 Steed Machinery Co., Ltd. No. 28, Ruiguang St., South Dist., aichung City 40249, aiwan el : Fax : info@steedmachinery.com.tw more information Steed Machinery Co., Ltd. ll rights reserved. * We reserve the right to make changes without notice in the course of continued development.
Hydraulic Surface Grinder Control Valve
Hydraulic Surface Grinder Control Valve Mechanically Operated Direction Valve Solenoid ilot Operated Directional Valve Double Way-hrottle Control Valve For Dresser Mounted on Wheel Head hrottle Control
Pressure Compensated Flow Control Valve
Pressure Compensated Flow Control Valve Screw Type Knob Type Solenoid Type Solenoid & Modular Type Temperature and Pressure Compensated Flow Control Valve www.steedmachinery.com.tw Contents Pressure Compensated
Proportional Valve.
Proportional Valve Electro-Hydraulic Proportional Pilot Relief Valve Electro-Hydraulic Proportional Flow & Directional Control Valve Electro-Hydraulic Proportional Relief & Flow Control Valve Electronic
PRESSURE SWITCH 1PS / 1PF / 1PT
RESSURE SWICH 1S / 1F / 1 Ref. No. 98 Release 7/2 1 Non adjustable differential type. Spring loaded sealed piston construction. Encapsulated design for protection against dust. Six pressure ranges available,
Flow Control Modular Valve (Pressure and temperature compensated)
v FLOW CONROL MOULR VLVE Flow Control (ressure and temperature compensated) Features to l/min,,ma C qhis modular valve is used to control actuator speed and for other flow control valve applications. w
Pump Safety Block Model DBA... / DBAW, Series 1X
ump Safety lock odel D... / DW, Series X Sizes to 6 SI ( bar) 7 G (65 L/min) R 5 88/.95 Replaces:.9 ermits low pressure start-up and by-pass of pump Direct mounting to SE pressure port of pump Light biasing
Directional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
Directional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
CMF2 Series Applicable cylinder bore size: Max. ø160
4G/ M4G/ Individual wiring manifold ISO size 2 DIN terminal ox type 5 port pilot operated valve ISO conformed valve 2 Series pplicale cylinder ore size: Max. ø160 MN4G/ Common specifications 4G/ W4G/2
Directional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
D07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.
R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to
Compact power pack program RE 00163/ The Drive & Control Company
Compact power pack program RE 00163/08.06 he Drive & Control Company Bosch Rexroth Oil Control Compact power pack program Compact power pack modular system Compact power packs are available with standard
Proportional pressure reducing valve of 3-way design Types 3DREP and 3DREPE
RE 29 184/12.02 Replaces: 12.98 roportional pressure reducing valve of 3-way design ypes 3DRE and 3DREE Nominal size 6 Series 2X Maximum operating pressure 100 bar Maximum flow 15 L/min H//D 5735/97 ype
3 Port Air Operated Valve. SYJA300 Series. How to Order. Nil Without sub-plate. Type of actuation. Normally closed Normally open
3 ort ir Operated Valve SYJ300 Series How to Order SYJ3 M3 Bracket Nil Without bracket F With bracket *The bracket is not mounted. *The bracket cannot be retrofitted later. SYJ3 Type of actuation Normally
S21 Series. - 1" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 1" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 Electrical Standard Housing: Encapsulated Waterproof Conduit
Sandwich plates Porting patterns to DIN Form A and ISO 4401
s orting patterns to DIN 440 Form and ISO 440 RE 48054/0.09 Replaces: 06.06 /6 ype HSZ 6 Valve side E L H Size 6 series Maximum operating pressure 5 bar C L F D late side able of contents Contents Information
250 bar P max. Technical Features. Functional Description
Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations
S21 Series. - 2" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 2" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 1/4 Electrical Standard Housing: Encapsulated Waterproof
Solenoid directional valves type DPHI, DPHE, DPHER two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com able E0854/E Solenoid al valves DHI, DHE, DHER two stage, ISO 440 size 0, 6, 5 and 3 DHI, DHE and DHER are spool, two or three position, two stage al solenoid valves. hey are operated by a
STH SERIES Hollow Rotary Index Tables
STH SERIES T he STH is an excellent fit for mid-range index table applications that require high accuracy, flexible mounting and a large hollow shaft. This product sets the standard for rotary positioning
IFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08
IF DG8 SOLENOID CONROLLED ILO OERED DIRECIONL VLVE SIZE NG/CEO8 Certifiction CE Certified -119115 1 ISO 91: FEurES : Highest performnce in NG Optimized spool design to reduce flow force roven qulity through
Relief Valves 24,6. T 10A Cavity Locating Shoulder Depth 0,8 .25 NPTF CBE CBE/S.25 BSPP CBE/M CBE/T. Relief Valves 49,3 25,1 27,2
ISO 5 SNDWICH ODIES luminium rated to 1 bar and S Iron rated to 35 bar. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. FUNCION to 4,6 4,6 3,
ISO 05 SANDWICH BODIES
ISO 5 SNDWICH ODIES luminum rated to 3 psi and Ductile Iron rated to 5 psi. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. FUNCION 3..81 to 1
High Pressure, High Flow Rate Modular Valves
eatures Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly and easily. roblems such
Ordering details MRV 02 P K Nominal size. 02:NG6 Cetop3 03:NG10 Cetop5 04:NG16 Cetop7 06:NG22 Cetop8. Modular relief valve MRV-B MRV-02C.
MRV series modular relief valves echnical specification Model Max.flow rate (l/min) Working pressure (Ma) Weight(kgs) Symbol list MRV- MRV-02 MRV series modular relief valves can control flow for positive
Meter-in pressure compensator, direct operated
Meter-in pressure compensator, direct operated RE 94/.07 Replaces: 0.0 / ype ZDC Sizes 0 to Component series Maximum operating pressure bar Maximum flow l/min tb07 able of contents Content age Features
SOLENOID VALVES / DIRECTIONAL CONTROL VALVES
LOW-OWE ONSUMTION ILOT-OETED DIETIONL ONTOL VLVE * SIZE 04/0/10 This is n ssemly of solenoid vlve nd directionl control vlve to operte the directionl control vlve (min vlve) y mens of the pilot pressure
S40 Series. - 1/4" NPT - Stainless Steel Body - 2-Way Piloted Piston - Normally Open. Dimensions/Weight
S40 Series - " NT - Stainless Steel Body - 2-Way iloted iston - Materials Seals: Nitrile, Viton, Teflon, Ethylene ropylene Orifice: ilot Stainless Steel Main Stainless Steel Ø 3/8 Electrical Standard Housing:
High Pressure, Subplate Mounted Directional Control Valves
ENGINEERING SECIFICIONS High ressure, Subplate Mounted Directional Control Valves MODEL H03 5 gpm (19 L/min) nominal 10 000 psi (700 bar) H03 valves are rated for 5 gpm (19 L/min) nominal flow at pressures
Relief Valves 43,2 21,6. T 10A Cavity Locating Shoulder 1,3 Depth 0,8 .25 NPTF FBP FBP/S.25 BSPP FBP/M FBP/T
ISO 3 SNDWICH ODIES luminium rated to bar and S Iron rated to 35 bar. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. 3 x y X Y Model Code List
Directional Control Valves. Features. Application. Operation
Catalog HY14-2502/US Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage 4-way valves. hey are available in 2 or 3-
Proportional Valves. Auxiliary Function Modules for Proportional Valves. Hydrostat, Parallel-Flow-Path, Pilot Shuttle and Tapping Modules
June 1996 G-459 VICKERS roportional Valves uxiliary Function Modules for roportional Valves Hydrostat, arallel-flow-ath, ilot Shuttle and Tapping Modules Functional Symbols For typical applications of
Valve Products Viking Lite Valves
atalog 0697- arker neumatic alve roducts iking ite alves The iking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or /8
Electric Proportional Pressure Reducing Valves Series ERP 03.ERP
Electric roportional ressure Reducing Valves Series ER 03.ER - 0912 Electric proportional pressure reducing valves SERIES ER Index of content: Description and main features: age 3 echnical data: age 4
DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
Directional Control Valves. General Description. Operation. Features
echnical Information Series D61VW General Series D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are
MRK 25 M a r k 2 5 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T C H N C L T V L V M
MRK 25 SRS direct solenoid actuated valves MRK 25 MRK 25 M a r k 2 5 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T C H N C L T................................................... 3 V L V M O
5.2 to 79 gpm 3000, 3600, 5000 psi
Modular Valve Series Modular Valve Series. to 79 gpm 000, 600, 000 Overview he modular valve is designed and engineered to integrate multiple hydraulic valve operations into a single unit, which eliminates
Directional Control Valves. General Description. Operation. Features
echnical Information Series D101VW General Series D101VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are
V50... V53 Series 3/2, 5/2 and 5/3 way valves Solenoid actuated and pilot operated 1/8... 1/2
50... 5 eries /2, 5/2 and 5/ way valves olenoid actuated and pilot operated /8... /2 igh flow in-line valves ompact and robust design ow power energy efficient solenoids lexible in-line and manifold mounting
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
Valve Products. Viking Lite Series Valves. Operating information. Minimum operating pressure, PSIG (bar) Materials. Recommended air quality for valves
atalog 000-US arker neumatic Valve roducts Viking ite Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or
Directional Control Valves. Application. Features. Operation
Catalog HY14-2502/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
Assembled Double Edge Ring System
22 ssembled Double Edge ing System ssembled Double Edge ing System When using Hepcootion Double Edge ing Slides encircled by bearings as shown below it is recommended that two concentric bearings should
GM Standard - GM 90.25
GM Standard - GM 90.25 utomotive Standards - GM 90.25 GM 90.25.00-XX-XX Page /4 GM 90.25.01-XX Page /5 GM 90.25.02-XX Page /6 GM 90.25.03-XX Page /7 GM 90.25.04-XX Page /8 GM 90.25.05-XX-XX Page /9 GM
Viking Lite Series Valves Air Control Valves
atalog 0697 arker neumatic Viking ite Series Valves ir ontrol Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
Monobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances
01 SERIES MODULAR VALVES. Pub. EC-1402
SERIES General Information Mounting Surface : ISO --3--, CEO-3, N-D Up to 3.5 Ma (57 SI), 35 L /m in (9.5 U.S.GM) ub. EC- MODULR VLVES he modular valves are functional elements with which a hydraulic system
IFP DG07 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG-16 / CETOP-07
ILO OERED DIRECIONL VLVE SIZE NG-1 / CEO-7 Certifiction CE Certified -119115 1 ISO 91: FEURES : Highest performnce in NG 1 Optimized spool design to reduce flow force roven qulity through 1 million endurnce
Cable Appendix. Valves. Cable Appendix. Page 16. Multi-way cables. D-sub Connector Cables. AXT100-DS Conforming to MIL-C-24308
Cable ppendix Cable ppendix Multi-way cables The multi-pole connector cables used on SMC valves are common across several ranges. Cables are available in accordance with the MIL standard C-08 and also
Bitzer Friga Pack Catalogue
Bitzer Friga Pack Catalogue Copyright HC Heat-Exchangers (PT) Ltd. 1 HCP Pack Units Model Designations HCP - Model - X X X Coil Row Depth 2 = 2 Rows 3 = 3 Rows 4 = 4 Rows Number of s S = Single D = Double
Directional control valves NG6...NG32 D03...D10 6
Directional control valves NG6...NG32 D03...D10 6 DIRECIONL CONROL VLVES 1 Index DO3 (NG6) age 2 to 22 D05 (NG10) age 23 to 42 D07 (NG16) age 43 to 54 D08 (NG25) 3000 SI age 55 to 65 D08 (NG25) 4600 SI
Open center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
Terminal Block Box (Spring Type) SY3000/5000/7000 Series
INFORMATION 5 ort olenoid alve Terminal lock ox (pring Type) Y3000/5000/7000 eries Compact RoH Height 6.7 mm shorter (Approx. 9% reduction) Installation area of the terminal block box Reduced by approx.
Hydraulic pilot control unit of sandwich plate design for the remote control of directional valves, pumps, motors
Hydraulic pilot control unit of sandwich plate design for the remote control of directional valves, pumps, motors RE 64 55/05.06 1/8 Replaces: 05.03 ype H6 Series 1X Contents Functional description, section
Directional Control Valves. Application. Features. Operation.
Catalog HY14-2500/US Introduction pplication Series D101 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D0H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol Drive
Proportional pressure reducing valve of 3-way design
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com Electric Drives and Controls Hydraulics Linear Motion and ssembly echnologies neumatics
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -
SDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE6 Directional control valves with direct acting solenoid SDE-SDE6 Features Simle, comact and heavy duty designed sectional valve from to sections. Different tye of inlet covers. Different tyes of
4 Flow Control Valves. Notes
Flow Control alves Content Flow Control alves Notes Example Flow l/min (GM) ressure bar (I) Code Cartridge ize ; D ize ; D ize ; D Line Mounted age Data heet Needle - Restrictor alves and alves with Reverse
The STH is a mid-range speed and torque gear reducer that
-SERIES The is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABLE planetary gearbox is the interface between
Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH SECION Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories echnical Information General Description Series D61VW directional control valves
Directional Controls
Vickers Directional Controls ilot Operated Directional Valves DG3V-10 Hydraulic ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid ilot Operated; 1100 l/min (290 USgpm) 350 bar (5000
Model AGF Manufacturing Inc. Reliability, Versatility, Code Compatibility
AGF Manufacturing Inc. i s e rack Model 8511 re-assembled iser with Hose est Connection, Ea ndai valve, and ptional ressure educing Valve izes: 1½" 2" 2½" 3" 4" 6" Base Model 8511 B--8511_19 1/19 eliability,
Users manual for. Wiper Control. Imtra Corporation 30 Samual Barnet Boulevard New Bedford MA 02745, U.S.A. Part No.: EX210604
Users manual for Wiper Control Imtra Corporation 30 Samual Barnet Boulevard New Bedford MA 02745, U.S.A. Tel: (508) 995 7000 Fax: (508) 998 5393 Toll free fax: (0800) 989 2580 Email: wipers@imtra.com www.imtra.com
Monobloc and Sectional Directional Control Valves
Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional
PowerMod PSX. Connector Series SPECIFICATIONS. Features. Blindmate Housings Allows PCB boards connections in tough to reach applications.
PowerMod PSX onnector Series he PowerMod PSX family of connectors is designed to offer low profile, high density, board to board blindmate connectors that provide either power contacts or power and signal
EXPLOSION PROOF CHECK VALVE TYPE SEW6 SERIE 3X ATEX DIRECTIVE & CENELEC STANDARD
EXLOSION ROOF CHECK VALVE YE SEW SERIE X AEX DIRECIVE & CENELEC SANDARD NO/E 0-0/-0 CARACERISICS Hydraulic : Cetop. Maximum service pressure : 50 Bar. Nominal flow max. : l/mn. hydraulic symbols : / et
r) Technologies, Inc. Linear Stepper Motor Travel 144 inches [3.6 m] Velocity 80 inches / sec [2 m/s] Acceleration 1 G 1 G Peak Force 65 lbs [289 N] C
![r) Technologies, Inc. Linear Stepper Motor Travel 144 inches [3.6 m] Velocity 80 inches / sec [2 m/s] Acceleration 1 G 1 G Peak Force 65 lbs [289 N] C](/thumbs/90/102012632.jpg "r) Technologies, Inc. Linear Stepper Motor Travel 144 inches [3.6 m] Velocity 80 inches / sec [2 m/s] Acceleration 1 G 1 G Peak Force 65 lbs [289 N] C")
Cs GROUP SIX LehriAG Avim SEI Ki CO LTD. Linear Stepper Motors - Single and Dual Axis Motors - Great Transport Motion Systems - Full, Half or Microstepping Contact Us! 800-433-3434 USA Email info@grp6.com
Control module. Table of contents. RE 51156/05.13 Replaces: Type IH15B
Control module RE 51156/05.13 Replaces: 09.11 1/96 ype IH15 Component series 1 Maximum operating pressure 350 bar Maximum flow 30 l/min H//D 7228 able of contents Contents age Features 2 Description, general
Mobile control block, 6-way version sandwich plate design. Type SM12, series 1X RE /05.03
RE 64 /05.03 Replaces : 0.0 obile control block, 6-way version sandwich plate design ype S, series X Nominal size aximum pressure, pump side 50 / 350* bar aximum pressure, actuator side 300 / 400* bar
EM-MPO/400. Multi-parameter Electricity Meter. Installation Instructions. Important: Retain these instructions. Mounting Requirements H O 2
I V E I V E I V E Multi-para Electricity Meter Important: Retain these instructions Contents 1 Unpacking...1 2 Storing...1 3 Installation...1 4 Disposal...8 1 Unpacking I V E G2118 2 Storing -25 C -23
Directional Control Valves. Application. Features. Operation
Catalog HY14-2500/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
82170/ /2-way diaphgram valves
> > ort size: DN 8... 50, G1/4... 2 (ISO G/NT) > > For high contaminated fluids > > Solenoid hermetically sealed from fluid > > Compact valve for industrial applications > > Small dimension > > Vacuum
Type : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil
ype : V20 Nominal Flow : 80 LM Maximum Flow : 135 LM (36 GM) Max. ressure : 350 ar (5000 psi) Medium : Mineral Oil Introduction: VELJN V20M Mobile directional control valve is a segment type design that
2 x 3/2 Way Valves Series S10
x / Way Valves Series S0 G/ and -In Connections OD 6 mm Actuation systems: Pneumatic Electrical pilot actuated Versions: x normally closed x normally open x normally closed and x normally open With external
Umschaltventile Magnet
Umschaltventile Magnet DFE 52/2 und DFE52/3 estellnr. Typ 25-1-1 DFE52/318ES-W1-12VDC 25-1-11 DFE52/318ES-W1-24VDC -1465 DFE52/318ES-Y1-12VDC -147 DFE52/318ES-Y1-24VDC Weitere Umschaltventil Varianten
Functional Symbols and Application Notes
Functional Symbols and pplication Notes Model Types KHDG5V Shown Simplified symbol Model Types KHDG5V Shown K()FDG5V symbols identical, but omit pilot-stage LVDTs Simplified symbol T T Detailed symbol
Modular valves DO5 (NG 10) 315 bar
Modular valves DO5 (N ) 315 bar 2 Modular valves DO5 (N ) 315 bar OSCH OSCH Modular valves DO5 (N ) 315 bar 3 roduct Range ressure relief valves age ressure reducing valves age 4 4 4 Check valves 4 16
Accessories. Subplates and Connection Plates for Four-Port Directional Valves. Vickers. ISO 4401, 02/03/05/07/08 General Description.
Vickers ccessories Subplates and Connection lates for Four-ort Directional Valves ISO 4401, 02/03/05/07/08 General Description his range of subplates and auxiliary connection plates offers an economical
D03, D05 & D08 SERIES
INDUSRIL FLUID OWER COMONENS ND SYSEMS D03, D05 & D08 SERIES D03-DC1-70 D05-SQ1--1K D08-R1--3K 31341 Friendship Drive, Magnolia, X 77355 el.: 281-259-7768 Fax: 281-259-7249 www.hyvair.com Features 1. Rugged
Volts: 600V Amps: up to 30A limited by conductor size Withstand: 200kA RMS Sym. Operating and storage temperature:
Technical Data 7 Effective December 05 Supersedes October 05 USSMNN SERIES HE breakaway and non-breakaway in-line fuse holders for UL 3/3 x -/ supplemental fuses Symbol: HE* Description: The ussmann series
VSG Series Features Descriptions VSG VSG VSG Descriptions Supply valve Descriptions Vacuum filter
Basic performance oriented general vacuum ejector unit Series Nozzle diameter: ø.5, ø, ø1. acuum switch and vacuum break valve, etc. are unitized, so types matching the work purpose is selectable. Features
Rexroth Hydraulics. Servo directional valve of 4-way design Type 4WS.2EM RE /03.99
RE 29 564/03.99 Replaces: 29 563 Servo directional valve of 4-way design ype 4WS.2EM Nominal size 6 Series 2X Maximum operating pressures 210 / 315 bar Maximum flow 40 L/min H//D 5994/98 ype 4WS2EM 6-2X/.E...K17EV
4/2, 4/3, and 5/2, 5/3 proportional directional valve, pilot operated, without electrical position feedback without/with integrated electronics (OBE)
/, /, and /, / proptional directional valve, pilot operated, without electrical position feedback without/with integrated electronics (OE) RE 9/8. Replaces:. /8 ype.wrz,.wrze and.wrh Sizes to Component
ULTRA 316 Stainless Steel FIXED FORCE RANGE. Force N. Give your application the professional look & performance...
FIXED RANGE 50 to 0N ULRA 316 FIXED RANGE Fixed Force Range he Fixed Force Strut Range can be supplied to any pressure within the range listed below for the type of strut. he threaded ends allow a large
PILOT CHECK VALVES. CAT: BFP/VCAR Page: 55 SHEET: 1/1 PILOT CHECK VALVES
IOT K VVS I/// T: F/V age: ST: / IOT K VVS VS SI TI IOT K VVS - I-I MOUTI The pilot-operated check valve blocks a single-acting actuator in any position. Tapered poppet in tempered and ground steel, released
up to 30A limited by conductor size Operating and storage temperature:
Technical Data 7 USSMNN Effective pril 07 Supersedes December 05 SERIES HE breakaway and non-breakaway in-line fuse holders for UL 3/3 x -/ supplemental fuses Use these part numbers to order insulating
CNC ROTARY TABLE. Specification
CNC ROTARY TABLE Features: Pneumatic / Hydraulic Clamping Pre Loaded Axial Radial Roller Bearing Gear Mechanism - Motor to Worm Shaft Dual Lead Worm Gear set Vertical mounting Option available with Vertical/Horizontal
YOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH, IHUNG HSIEN, IWN 41468, RO. EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/
Gantry Manual Bag Pickup and Gantry System
Gantry Manual Bag Pickup and Gantry System CHOICE BGGING EQUIPMENT, LTD 18-012 (gantry) sequence description, basic systems description and operating procedures: The sequence description is as follows:
Hydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified
SOOL VALVE HYDAULI MOOS Quality assured company - ISO 9001 ertified SOOL VALVE - he distributor valve has been integrated with the output shaft. he valve has hydrodynamic bearings, and has infinite life
High Response Type Proportional Electro-Hydraulic Directional and Flow Control Valves
igh Response ype roportional Electro-ydraulic s igh response, high precision and high reliability are achieved by a combination of compact and powerful solenoid and spool-position-detection LVD. Direct
Monobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 200 991210 03 / 10.04 1/220 HDS11 8 Sectional directional control valves HDS11 8 Standard valves................................................................
% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT
Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NT / 3/ / 5/ 5/3 Features Available in different coil terminations H Class coil construction Designed
Directional Control Valves. Features. Application. Operation
Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and
Installation Instructions
c Installation Instructions -osition Electronic ressure Regulator Kits his manual provides instructions for Cascade -osition Electronic ressure Regulator and Indicator System. he kit provides selectable