BENDS DIN B WELD ENDED ISO TUBE
|
|
- Godwin Freeman
- 5 years ago
- Views:
Transcription
1 BENDS 90 Bends Long,, Weld Ended, ISO Tube OD WT L1 R DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB Bends Long,, Weld Ended, ISO Tube OD WT L1 R DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB DNB.200
2 TEES Equal Tee,, Weld Ended, ISO Tube OD WT L TE.DNB TE.DNB TE.DNB TE.DNB TE.DNB TE.DNB TE.DNB TE.DNB TE.DNB TE.DNB TE.DNB TE.DNB TE.DNB TE.DNB TE.DNB.200 Pulled Tee,, Weld Ended, ISO Tube OD WT L1 L TP.DNB TP.DNB TP.DNB TP.DNB TP.DNB TP.DNB TP.DNB TP.DNB TP.DNB TP.DNB TP.DNB TP.DNB TP.DNB.200
3 TEES x Pulled Reducing Tee,, Weld Ended, ISO Tube OD1 OD2 L1 L2 012 x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB x TR.DNB
4 REDUCERS x Concentric Reducers,, Weld Ended, ISO Tube OD1 WT1 OD2 WT2 L1 010 x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB x RC.DNB
5 REDUCERS x Eccentric Reducers,, Weld Ended, ISO Tube OD1 WT1 OD2 WT2 L1 010 x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB x RE.DNB
Plain Ended Welding Fittings BS 4825 Part 2
Plain Ended Welding Fittings BS 4825 Part 2 Alchem offer a wide range of plain ended weld fittings to suit both hygienic and pharmaceutical applications. These include bends, tees, and reducers, both concentric
More informationDIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
More informationSECTION 1 Grooved Fittings
Anvil offers two different sets of stainless steel fittings. The Gruvlok Series Fittings have full flow designs formed from type 304SS pipe. The Schedule 10 fittings are fabricated from segmentally welded
More informationALUMINUM DISTRIBUTING, INC S.W. 2nd Ave. Ft. Lauderdale, FL Table of Contents
Table of Contents Page 2.........Equal & Unequal Angle Structural & Architectural Page 3.......................Flat Bar Structural Page 4.....................Flat Bar Architectural Page 5..... U Channel,
More informationGEMO. Fittings DIN11852/DIN11850 Weld to the DIN11850 and DIN11852 tubes 1.2 TUBES AND FITTINGS
UBES AND FIINGS Fittings DIN11852/DIN11850 Weld to the DIN11850 and DIN11852 tubes All bends, tees, and reducers are according to DIN11850/ DIN11852 EACH FIINGS PACKAGING HAS A BACODE 27 UBES AND FIINGS
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More information3000 lb Socket Weld Fittings - ANSI B16.11/BS 3799
Weld and Threaded Fittings 3000 lb Weld Fittings - ANSI B6./BS 3799 /8 /4 3 /8 / 3 /4 /4 / / 3 4 Centre to Bottom of 45 Tees, & Elbows Bore Diameter Bore Diameter of Fittings Thickness s - Average socket
More informationSanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A
01 SANITARY PIPE FITTING Sanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A 02 FERRULE / UNION / PIPE HOLDER Ferrule End Cap Ferrule Clamp Ferrule Gasket
More informationAdvanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationHYGIENIC TUBE & PROCESS COMPONENTS DIN 11866
HYGIENIC TUBE & PROCESS COMPONENTS DIN 11866 DIN 11866 This norm range DIN 11866, DIN 11865 and DIN 11864 are linked to each other. The DIN 11866 is for example also mentioned in the other norms in the
More informationHDPE PIPE SYSTEMS PRODUCT CATALOGUE.
HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington
More informationSECTION 5 AMERICAN. Ductile Iron Mechanical Joint Fittings
ECION 5 AMERICAN Ductile Iron Mechanical Joint Fittings he principal standards covering full body mechanical joint fittings are ANI/AWWA C110/A21.10 and ANI/AWWA C111/A21.11. Compact ductile iron fittings
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationFLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationMarine cable ladders. Marine cable ladders
386 This chapter contains an overview of the RICO marine for various loads and applications subdivided in product families. Content Table of content Page 40 mm side height 390 387 System overview cable
More informationMechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications
82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal
More informationButtweld. Pipe Fittings NOTE: ANSI B16.9, MSS-SP-43
Buttweld Pipe Fittings NOTE: ANSI B16.9, MSS-SP-43 Buttweld fittings in duplex and other special alloys are available from stock and throughout our worldwide network of suppliers. and eccentric reducers,
More informationUNITED BRAND FITTINGS
NFF0711 UNITED DUCTILE IRON CLASS 0 FLANGED FITTINGS UNITED BRAND FITTINGS AWWA C1, ANSI A21. Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality
More informationSMS Swedish Standard Union
SMS Swedish Standard Union Swedish standard union incorporates a round slotted nut and features a crevice free flat section seal. The union is suitable for use on permanently fitted sections of pipework
More informationDimensional Data Nesting Chart Earthwool
Nesting Chart CI-PE-NC 12-1 Dimensional Data Nesting Chart Earthwool 1000 Insulation 22 Dimensional Data Nesting Chart Insulation O.D. Single Layer Dimensional Data ½" 1" 1½" 2" 2½" 3" 3½" 4" 4½" " 6"
More informationd z z Le Le Elbow d L mm equiv inch 110 Le r 1) z 5 2 5 5 8 2 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
More informationBioprocessing Equipment
ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment AN AMERICAN NATIONAL STANDARD Three Park Avenue New York, NY 10016 CONTENTS Foreword... vii Statements of Policy... viii Committee Roster...
More informationC110 DUCTILE IRON FLANGED FITTINGS
C110 DUCTILE IRON FLANGED FITTINGS SIZES: 2-64 C110 DUCTILE IRON FLANGED FITTINGS BASIC SPECIFICATIONS MATERIAL: Ductile Iron ASTM A536 Grade 60-42-10, 65-45-12 or 70-50-05. PRESSURE: 250 PSI Water Working
More informationEarthwool 1000 Pipe Insulation
Nesting Chart CI-PE-NC 12-1 Earthwool 1000 Pipe Insulation Dimensional Data Nesting Chart Single Layer Insulation O.D. Single Layer Dimensional Data Pipe Size ½" 1" 1½" 2" 2½" 3" 3½" 4" 4½" " 6" ½" 0.840"
More informationFactory address: Mola sadra st., Abooreyhan st Eshtehard Industrial Town, TEHRAN/ IRAN
z d Le mm equiv inch Le r 1) z z Le L 110 5 2 5 5 8 2 Elbow d 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationPIPELINE INSPECTION SURVEY QUESTIONNAIRE
ARKA PETROGAS PIPELINE PIPELINE INSPECTION SURVEY QUESTIONNAIRE Project: PipeLine Name: ARKALINE Proj. No.:.. Please complete questionnaire as accurate as possible. Phone: +98 21-65611626 Fax: +98 21-65611627
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationPlastic Tubular. P-Traps with Marvel Adapter Reducing washer included.
P l a s t i c T u b u l a r P-Traps with Marvel Adapter Reducing washer included. 802PVCBG 1-1/2 P-Trap with Marvel Adapter, bagged 802PVCBX boxed 802DPVCBG with Box Flange, bagged 802DPVCBX with Box Flange,
More informationDirect Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
More informationPTFE Lined Pipe and Fittings
Allied Supreme Corp. - 1 - PTFE Lined Pipe and Fittings Allied Supreme Corp. - 2 - Index Specification For PTFE Lined Pipe and Fittings..3 PTFE Lined Pipe 7 PTFE Lined 90 Elbow. 8 PTFE Lined 45 Elbow.9
More informationAir Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
More informationButt Welding Fittings ASME Standards
18 Butt Welding Fittings ASME Standards Standard Grades according ASTM A / ASME SA403, 304/L and 316/L (dual marked and certified), ASME B16.9, annealed and quenched, bevelled ends to ASME B16.25, hardness
More informationDuctile and Cast Iron Flanged Fittings Metalfit
Ductile and Cast Iron Flanged Fittings 2 48 Metalfit Flanged oint Dimensions NSI/WW C110/21.10 BC OD Size OD BC ole Dia. Bolt Size No. Bolts 2 6.00 4.75 0.62 0.75 5/8 x 2-1/4 4 2-1/2 7.00 5.50 0.69 0.75
More informationHAWLE - ZAK System. the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
HAWLE - System the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS. HAWLE - System the threadless, restraint jointing system for service connections integrated in Pipe Saddles, Service
More informationC&N Industrial Group Limited. Better Pipeline, Better Connection.
C&N Industrial Group Limited Better Pipeline, Better Connection. About C&N Flange & Fitting producing Steel pipe expand & Welding Pipe accessories(jiangsu) Pipeline technology consult Incorporate on C&N
More informationGRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
More informationTHOMAS. PolyGrip Range. Couplings & Flange Adaptors Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Restrained Products PIPE PRODUCTS PolyGrip Range Restrained Couplings, Flange Adaptors, End Caps and Harnesses for HDPE and PVC Pipe D1 PolyGrip Range Application Fully
More informationBioprocessing Equipment
ASME BPE-2009 (Revision of ASME BPE-2007) Bioprocessing Equipment A N I N T E R N A T I O N A L S T A N D A R D ASME BPE-2009 (Revision of ASME BPE-2007) Bioprocessing Equipment AN INTERNATIONAL STANDARD
More informationIMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS. ANSI # 150.
IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS.. The information contained in this publication is intended as a guide to customers, and is freely given in good faith. Whilst every care has been
More informationstrana / page
Sadržaj / Content: Čelične bešavne cevi / Seamless steel pipes Čelične šavne cevi / Welded steel pipes Sprinkler cevi / Sprinkler pipes Cevni lukovi / Elbows Koncentrične redukcije / Reducers concentric
More informationGAS MATERIALS - STEEL
GAS MATERIALS - STEEL ITEM # DESCRIPTION EPOXY COATED STEEL PIPE (Per Foor) INCH STEEL PIPE 3 INCH STEEL PIPE 3 4 INCH STEEL PIPE 4 INCH STEEL PIPE INCH WELD FLANGE (SLIP ON) # FLAT FACE INCH WELD FLANGE
More information800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationGrinnell Grooved Fire Protection Products Grooved Fittings
Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical
More informationGRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
More informationPrices subject to change without notice. - International product pricing will vary. ASA-LIT 11/01
NEW PRODUCTS Larger Radius Elbow Weld ittings Nor-Cal offers 45 and 90 Radius Elbows in sizes up to ten inches OD. Radius elbows offer the highest conductance geometry in a tube bend. These elbows are
More informationPPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS
PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS 1 Pahang Pipe Fittings PPF is one of the leading manufacturers of Buttweld fittings and flanges. Our highly specialized product range is capable of catering
More informationNEW ADVANTAGE 29 SERIES - FULL BORE SDR11/PN16 MITRE BENDS
13 NEW PRICE LIST 1 October 2018 HDPE Long Spigot Fabricated Fittings Advantage 29 Series Mitred Bends Plastic Systems have been supplying bespoke fabricated fittings for major projects for many years.
More informationLong Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
More informationNSF/ANSI 61 Drinking Water System Components Health Effects
The Public Health and Safety Organization NSF Product and Service Listings These NSF Official Listings are current as of Thursday, January 08, 2015 at 12:15 a.m. Eastern Time. Please contact NSF International
More informationIntroduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development.
Pipes & Fittings SHIELD Introduction SHIELD is a company created to cater to the infrastructure, fire protection and building services industries with a comprehensive range of products designed to be competitive
More informationF L A C110 FLANGED FITTINGS CAST IRON & DUCTILE IRON 2007 Sigma Corporation, All Rights Reserved
F L A C110 & N GE D 2-54 / BASIC SPECIFICATIONS www.sigmaco.com / MATERIAL: Cast Iron: ASTM A48, Grade 25B (2-14 ) / Grade 30B (16-54 ) Ductile Iron ASTM A536 PRESSURE: 250 PSI Water Working Pressure for
More informationInitiate WARNING. Illustration 1. Panel Connection Guidelines:
Failure to install product as instructed, use of hardware other than that which is provided with the product, or failure to comply with all instructions can result in product failure and/or personal injury
More informationMANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
More information3A SANITARY WELDED PIPE-FITTINGS
- SNITY FITTINS 3 SNITY WEE PIPE-FITTINS W1001 W1002 W1003 W1004 W1005-1 3 1 45 - Short type ong type Short type ong type 3 Welded Elbow (90 ) 1 1/2" 12.7 19.1 38 19.1 3/4" 19.1 28.5 38 28.5 1" 25.4 38.1
More informationBelt Scales. Speed Sensors. Milltronics Bend Pulleys. 4/48 Siemens WT Technical specifications. Overview
Belt Scales Siemens G 2013 s Overview Return belt driven pulley provides rotation for shaft-driven speed sensors..5 inch size is self-cleaning. Benefits Heavy-duty design for high belt tension Self cleaning
More informationDK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
More informationA Full Line of Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical, and Electronics Processing Industries PUMPS VALVES FITTINGS TUBING GAUGES
More information4-11/16 Square Boxes. With Conduit Knockouts OB/SB-1. 4SJ-3/4 1-1/2 Deep, Welded. 4SJ-EK 1-1/2 Deep, Welded. 4SJD-3/4 2-1/8 Deep, Welded
4-11/16 Square Boxes With Conduit Knockouts 4SJ-3/4 1-1/2 Deep, Welded 4SJ-EK 1-1/2 Deep, Welded 4SJD-3/4 4SJD-EK 4SJD-3/4-1 4SJD-1 4SJD-1-1/4 Number Depth Cubic Inch Knockout Description Wt. Lbs. Std.
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationBioprocessing Equipment
ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment A N I N T E R N A T I O N A L S T A N D A R D ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment AN AMERICAN NATIONAL STANDARD
More informationPIPE SYSTEM TECHNICAL DATA
PIPE SYSTEM TECHNICA DATA Information The Alvenius standard product range is approved according to PED 97/23/EC. The PED approval has been integrated with the certified Quality Management System. t Outside
More informationABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 8 71 335 SECTION 4 Cable Ladder and A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO91 Lic No 13146 EDITION 2 SECTION 4: Cable Ladder & Type 3/5 Type 4/7L Type
More informationHYGIENIC TUBE & PROCESS COMPONENTS DIN/ISO/METRIC
HYGIENIC TUBE & PROCESS COMPONENTS DIN/ISO/METRIC EN DIN (ISO/Metric) The most important norm range within Europe for industrial (non Food) applications consists of 2 dimension ranges. The ISO 1127 dimension
More informationg/cm C Mpa % 2 kj/m Mpa Mpa -1-4 K x 10 C
PEPiping systems 7 plastics at sangir > technical details & applications > pe Technical details & applications Polyethylene Chemical composition of PE: Ethylene Polyethylene Polymer n Polyethylene is a
More informationUPP Semi-Rigid Pipework System
UPP Semi-Rigid Pipework System Since being introduced as the world s first electrofusion pipework system for fuel applications over thirty years ago, UPP brand semi-rigid pipework has become known globally
More informationUNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
More informationUNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
More informationSaunders Tee Body for Flow Diversion and Sampling Applications
Saunders Tee ody for Flow Diversion and Sampling Applications The Saunders Tee ody combines a valve body and tee fitting in a single design manufactured from a single billet. This results in a valve body
More informationJUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems
JUST PIPING, JUST FITTING A Comprehensive Integrated Solution For Piping Systems SF 01 DUCTILE IRON PIPE FITTINGS FD1011 FD1021 FD1022 FD1031 FD1102 FD1103 FD1111 FD1121 Double Flanged Piece Flanged spigot
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationCOMPONENTS FOR WATERJET
COMPONENTS FOR WATERJET Easy to use, up to 101.500 psi (7.000 bar) & customizable features Based on a long-term cooperation with machines manufactures and users from all over the world, we have developed
More informationHP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems)
HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems) CHEMICAL INDUSTRIAL Fiber Glass Systems provides a broad range
More informationSUREFLOW FLANGED FITTINGS DUCTILE IRON PIPELINE SYSTEMS
80-750. MANUFACTURED TO AS/NZS 2280. FLANGE DIMENSIONS TO AS 4087 Ductile Iron fittings provide high strength and impact resistance Suitale for in ground or aove ground applications All fittings are supplied
More informationCopper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30)
Shipbuilding OSNA -10 and OSNA -30 Copper-Nickel Alloys for Seawater Piping Systems (CuNi 90/10 and CuNi 70/30) KME Germany GmbH & Co. KG Shipbuilding - OSNA -10 and OSNA -30 [EN] Content KME - The Company
More informationKAT. DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels
KAT DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels KAT Series DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels Kruger Ventilation Industries certifies that the KAT series : version S and - model 9-7 to
More informationBall & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
More informationget connected with clamp fittings Bradford Company, Inc
get connected with clamp fittings Bradford Company, Inc. 800.789.78 www.bradfordfittings.com 2 clamp fittings clamps end caps hangers ferrules elbows tees laterals reducers For the right fitting at Your
More informationIDF / ISS Hygienic Union BS 4825 Part 4
IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960. This hexagonal screwed union is more commonly referred
More informationWe Supply. You Build. Soon Hoe Steel Sdn Bhd. Your One Stop Steel & Fitting Supplier PRODUCT CATALOGUE. Group of Companies
We Supply. You Build. Soon Hoe Steel Sdn Bhd Your One Stop Steel & Fitting Supplier PRODUCT CATALOGUE CONTENT. ABOUT SOON HOE STEEL 4. CORPORATE VISION AND MISSION 4. CONTACT US 5. OUR PRODUCT 6. API PIPE
More informationWater, Sewer & Drain Fittings
Why Compact? Compact Joint are manufactured from a high strength, impact resistant ductile iron that offers a great margin of safety against service failures and provides vastly increased resistance to
More informationSEAMLESS & WELDED PIPE
SEAMLESS & WELDED PIPE SPECIFICATIONS: LENGTHS: ASTM A312M-08 6.1 METRE/RANDOMS FINISH: WELDED ANNEALED & PICKLED SEAMLESS COLD FINISH/HOT FINISH NB PIPE SIZE SIZE WELDED SEAMLESS APPROX. WGT Inch mm O.D.
More informationXiamen Landee Industries Co., Ltd was founded on 14th May 2001;
ABOUT US Xiamen Landee Industries Co., Ltd was founded on 14th May 2001; Our main products are OCTG, Heat Exchanger Tube, Plate, Pressure Vessel, Line Pipe, Valve, Flange, Fitting, Gasket, Fastener, etc;
More informationEXPORT. PVC Soil and Waste.
PVC Soil and Waste www.dyka.com INJECTION MOULDING DEPARTMENT DYKA PLANT 2 AT DYKA We proudly state that we can provide you just-in-time with all possible solutions for your specific requirements related
More informationBenteler Distribution. Steel tube solutions for hydraulic and pneumatic applications
Benteler Distribution Steel tube solutions for hydraulic and pneumatic applications Benteler Distribution Customized steel tube solutions for challenging requirements Benteler Distribution is an internationally
More informationSeries G. STI Gasketed Sewer Fittings SDR 35 STI. Injection Molded in Sizes 4 12 Fabricated in Sizes STI Gasketed Sewer SDR 35 G Series
Gasketed Sewer ittings SDR 35 Third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D3034, 1336 and CSA B182.2. Gasketed Sewer ittings SDR 35 Gasketed Injection Molded
More informationASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
More informationHARCO PVC C-900 GASKETED FITTINGS DESIGN DATA
HRO PV -900 GSKETED FITTINGS DESIGN DT E SPEIFITIONS REPIR OUPING SPIGOT O.D. SIZE STYE Spigot O.D. 4 M 4.3 3.1 6.3 4.80 6 M 4.8 3.5 8.6 6.90 8 M 5.4 4.0 11.0 9.05 10 F 9.0 5.0 13.0 11.10 12 F 9.5 5.5
More informationVulkollan & Polyamide Combined Bearings
Vulkollan & Polyamide Combined Bearings Features of Vulkollan & Polyamide Combined Bearings Silent Operation, 8 Profile/Bearing sizes Travel Speeds up to 16 Ft/sec Low Friction from 2RS seals on Ball Bearings
More informationKing Lai Hygienic Materials Co., Ltd. CDA/ Bulk Gas / UHP Gas Delivery System
King Lai Hygienic Materials Co., Ltd. CDA/ Bulk Gas / UHP Gas Delivery System Introduction 1 King Lai Standard and Specifications 2 Cleaning & Packaging Process Tube & Pipe 34 56 TUBE PIPE ASTM PIPE JIS
More informationSANITIZER PARTS SANITIZER PARTS
SANITIZER PARTS 579 AUTOMATIC FEEDER - MODEL 300, 302, 300-19, 300-29 R171026 R171016 Model No.: 300 302 Description: AUTOMATIC FEEDER SPA HOT TUB FEEDER 1 1 R172008W 3 in. threaded cap, white 2 1 R172009
More informationPARTS LIST: VIEWPOINT RUNNING BOARD NISSAN MURANO EXCLUDES 2dr CROSSCABRIOLET CONVERTIBLE
PARTS LIST: VIEWPOINT RUNNING BOARD Qty Description Qty Description 1 Driver/Left Running Board 14 10-1.5mm x 35mm Bolt Plates 1 Passenger/Right Running Board 6 10-1.50mm x 30mm Hex Bolt 1 Driver/Left
More informationLIMITED WARRANTY. Some products and sizes may be discontinued when stock is depleted, or may require a minimum quantity for ordering.
LIMITED WRRNTY Bradford, a division of Dixon Valve and Coupling Company, (herein called "Bradford") warrants the products described herein, and manufactured by Bradford to be free from defects in material
More information4300 Catalog. Metric Tube. Parker Hannifin Corporation Tube Fittings Division Columbus, Ohio
Metric Tube Q 4300 Catalog Metric Tube Q2 4300 Catalog Metric Tube Introduction Parker offers three types of seamless metric tubes for hydraulic, pneumatic and instrumentation applications: dipped for
More informationSplit Tees BRUVAL. Description. Sizes: 12 up to 68 inches. We provide fittings up to 68 inches.
BRUVAL Split Tees Sizes: 12 up to 68 inches TECHNICAL SPECIFICATION 2016.07.0001 We provide fittings up to 68 inches. Description BRUVAL provides a wide variety of standard and customised Fittings from
More information83 series Brass compression fittings
> > Port size: Ø /8... 2, SPP and SPT thread > > For use in areas of vibration > > Pre-assembled units > > No special assembly tools or heat required > > an be remade without damage to tube Technical features
More information