10005 Bul BULLETIN. December GUIDING SYSTEMS HEC39 Hydraulic Power Unit with Integrated Proportional Valve
|
|
- Collin Summers
- 5 years ago
- Views:
Transcription
1 GUIDING SYSTEMS HEC39 Hydraulic Power Unit with Integrated Proportional Valve BULLETIN 05 Bul December 2013 STANDARD DESIGN FEATURES H09 series high performance proportional valve is integrated onto each hydraulic power unit Integrated blocking valve to eliminate cylinder drift Fixed displacement and variable volume pumps are available Prewired junction box with 24 VDC power supply Pressure line fi lter with mechanical dirt indicator and 10 micron fi lter Carbon steel reservoirs and reservoir covers Straight thread SAE O-Ring ports Oil level sight gauge with thermometer Sizes available from HP ( KW) with fl ow combinations from GPM ( LPM) AVAILABLE OPTIONS Units with dual pump/motors for % standby Multi-station manifolds for multiple control valves Air cooled or water cooled with water temperature control valves Pressure line filter with electrical dirt indicator Metric ISO 6149 ports Motor starter and disconnect panels Pressure, temperature and level switches pre-wired to a junction box Custom designs are available
2 Section Table 1 Single /Motor 1750 RPM, Hz Motor (Liters) (mm) See Note 3 (LPM) 0.5 (0.37) 1 (0.75) 1.5 (1.1) 3 (2.2) 5 (3.7) 7.5 (5.5) 10 (7.5) 20 (15) 10 (37.8) 16 1/2" x 19" x 15" high (419 mm x 483 mm x 381 mm high) 1.8 (6.8) 3 (11.3) PSI ( Bar) 475 PSI 32.7 Bar) 700 PSI 48.2 Bar) 21 1/2" high 546 mm high) 5 (18.9) 7 (26.5) 9 (34.0) 5.0 ( PSI 41.3 Bar) 5.0 ( GPM@ PSI ( Bar) 13 7 PSI ( Bar) PSI 13 (49.2) 13 (49.2 (1219 mm x 552 mm high) 17 (64.3) 19 (71.9) 17 8 PSI ( Bar) 19 ( PSI ( PSI ( Bar) 25 ( (94.6) 900 PSI ( Bar) 1. Hydraulic Oil Specifi cations: Mineral based hydraulic fl uid, 75 to 0 SSU (17 to 65 cst) viscosity range. Recommended operating temperature -1º F (38-º C). Fluid cleanliness level ISO Class 15/12/10 for longer life, 16/14/11 for 2. Table 1 pressure and fl ow settings are at 1750 RPM with petroleum oil viscosity of 150 SSU (34 cst) at º F (38º C) Bulletin page 2
3 Section Table 2 Dual /Motor 1750 RPM, Hz Motor for Standby Operation (Liters) (mm) See Note 3 (LPM) 1.5 (1.1) 3 (2.2) 5 (3.7) 10 (7.5) 15 (11) 20 (15) (22) () 120 (454.2) 18" x 20 1/2" x 26" high (457 mm x 521 mm x 6 mm high) (1219 mm x 522 mm high) " high 762 mm high) 3 (11.3) 3 (11.3) 9 (34.0) 17 (64.3) 22 (83.2) 25 (94.6) 700 PSI 48.2 Bar) ( (83.2 ( ( PSI ( Bar) 1. Hydraulic Oil Specifi cations: Mineral based hydraulic fl uid, 75 to 0 SSU (17 to 65 cst) viscosity range. Recommended operating temperature -1º F (38-º C). Fluid cleanliness level ISO Class 15/12/10 for longer life, 16/14/11 for 2. Table 2 pressure and fl ow settings are at 1750 RPM with petroleum oil viscosity of 150 SSU (34 cst) at º F (38º C) Bulletin page 3
4 Section Table 3 Single /Motor 1500 RPM, 50 Hz Motor (Liters) (mm) See Note 3 (LPM) 0.5 (0.37) 1 (0.75) 1.5 (1.1) 3 (2.2) 5 (3.7) 7.5 (5.5) 10 (7.5) 20 (15) 10 (37.8) 16 1/2" x 19" x 15" high (419 mm x 483 mm x 381 mm high) 1.7 (6.4) 2.5 (9.4) PSI ( Bar) 575 PSI 39.6 Bar) 21 1/2" high 546 mm high) 4.1 (15.5) 5.7 (21.5) 7.3 (27.6) 4.1 ( PSI ( Bar) 4.1 ( GPM@ ( PSI ( Bar) PSI ( Bar) PSI ( (.1) 10.6 (.1 (1219 mm x 552 mm high) 13.8 (52.2) 15.5 (58.6) PSI ( Bar) 15.5 ( PSI ( PSI ( Bar) 20 (77.2) 24.4 (92.3) 20.4 ( PSI ( Bar) 1. Hydraulic Oil Specifi cations: Mineral based hydraulic fl uid, 75 to 0 SSU (17 to 65 cst) viscosity range. Recommended operating temperature -1º F (38-º C). Fluid cleanliness level ISO Class 15/12/10 for longer life, 16/14/11 for 2. Table 3 pressure and fl ow settings are at 1500 RPM with petroleum oil viscosity of 150 SSU (34 cst) at º F (38º C) Bulletin page 4
5 Section Table 4 Dual /Motor 1500 RPM, 50 Hz Motor for Standby Operation (Liters) (mm) See Note 3 (LPM) 1.5 (1.1) 3 (2.2) 5 (3.7) 10 (7.5) 15 (11) 20 (15) (22) () 120 (454.2) 18" x 20 1/2" x 26" high (457 mm x 521 mm x 6 mm high) (1219 mm x 522 mm high) " high 762 mm high) 2.5 (9.4) 2.5 (9.4) 5.7 (21.5) 10.6 (.1) 17.9 (67.7) 24.4 (92.3) 32.6 (123.3) 32.6 (123.3) 5.7 ( ( ( ( ( PSI ( Bar) 1. Hydraulic Oil Specifi cations: Mineral based hydraulic fl uid, 75 to 0 SSU (17 to 65 cst) viscosity range. Recommended operating temperature -1º F (38-º C). Fluid cleanliness level ISO Class 15/12/10 for longer life, 16/14/11 for 2. Table 4 pressure and fl ow settings are at 1500 RPM with petroleum oil viscosity of 150 SSU (34 cst) at º F (38º C) Bulletin page 5
6 Part Ordering Information Pressure PSI (note 1) Rating (From 1.8- GPM) (note 1) 4-Way Valve 1=4-way valve with 24 VDC coils 2=4-way valve with 120 VAC coils 3=4-way valve with 2 VAC coils (Omitted =No 4-way valve provided) (note 6) Number of H09 Proportional Valves 1=One H09 Valve 2=Two H09 Valves D=dual pump/motor for standby (Omitted=No standby unit) Bulletin Page 6 L=Level switch (Omitted=No level switch) (note 2) HEC39 A A3F - 2A1 / DPTLEFJM Reservoir Size A=10 gallon B= gallon C= gallon D= gallon E= gallon F=120 gallon Motor Horsepower (From 0.5-HP) (note 1) Motor Voltage A=2-4/3/ B= /3/50 C=575/3/ D=2/0/3/50 F=fi xed displacement pump (Omitted=variable volume pump) Oil Cooler type A=Air cooler (note 3) W=Water cooler (note 4) P=Pressure switch (Omitted=No pressure switch) T=Temp Switch (Omitted=No temp switch) (note 2) E=Excludes 24 VDC supply (Omitted=includes 24 VDC supply) M=Metric ISO ports on the manifold (Omitted= S.A.E. straight thread) F=2 VAC blocking valve G=24 VDC blocking valve H=No blocking valve (Omitted=120 VAC blocking valve coil) J=Electrical dirt indicator (Omitted= mechanical indicator) 1. Review sheets 2, 3, 4 and 5 for available pressure, fl ow combinations for various horsepower units. 2. Dual range switches are available upon request. 3. For optimum cooling effi ciency, ambient air should be well ventilated and air temperature should not exceed 95º F (35º C). 4. Cooling water temperature should not exceed 75º F (24º C). Water fl ow rate should be between ¼ and ½ of rated pump flow. 5. For hydraulic power units with special features, please contact Fives North American Guiding Systems. 6. Customer is responsible for plumbing both manifold stations together in parallel, to incorporate a 4-way valve. Fives North American Combustion, Inc. Guiding Systems 4455 East 71st Street - Cleveland, OH USA - Tel: Fax: fna.guiding@fi vesgroup.com - vesgroup.com/fi vesna 12/13 B
HEC2003/2004 Series Servo Valve System
BULLETIN 10006 Bul. 5.00 GUIDING SYSTEMS October 2011 HEC2003/2004 Series Servo Valve System High response servo valve with spool position feedback signal All components are mounted over the drip pan Servo
More informationAdjustable Port Valves for HOT or COLD AIR, GAS, OIL, WATER, STEAM
ADJUSTABLE PORT VALVES Bulletin 1008A December 2009 Adjustable Port Valves for HOT or COLD AIR, GAS, OIL, WATER, STEAM 3" Adjustable Port Gas Valve Beck Electric Operator 6" Adjustable Port Air Valve Honeywell
More informationD SERIES HYDRAULIC PUMP
uk distributor for D SERIES HYDRAULIC PUMP quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk Introduction to Concentric D Series Hydraulic Pumps Concentric offers one
More informationApplication. Additional Features. Description. Features
1199 Series Packaged Valve and Motor Assemblies Bulletin 1199 January 2010 Direct coupled / packaged assembly no linkage to adjust. Easy setup. Accurate, consistent response. Wide selection of valve types
More informationFluid Handling: Panel Unit
Fluid Handling: Panel Unit A permanently mounted, continuous-duty system for critical applications or difficult to access equipment. It also can serve as a maintenance station. The Overview The Panel Unit:
More informationLT Series Lubricant Management System (LT-LMS)
FLUID HANDLING: LT Series Lubricant Management System (LT-LMS) This system combines filtration, storage, and breathers in one simple solution to keep your lubricants clean and dry. The Overview The LT-LMS:
More informationSMR Series. Submicronic Removal Fluid Purifi cation Systems
SMR Series Submicronic Removal Fluid Purifi cation Systems 201 SMR Series Applications The SMR Series is the smart purifi cation solution for fl uid fl ow in the 2-10 GPM (8-38 LPM) range. The SMR contains
More informationUŽSISAKYKITE internetu telefonu el. paštu
Features Axial piston pump MA10VO in swashplate design is used in open loop circuits. Flow is proportional to drive speed and displacement. By adjusting the position of the swashplate it is possible to
More informationPressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features
Technical Information General Description Series R5P direct operated, 3-way pressure compensators can be combined with any type of fixed or adjustable flow resistor (throttle) to provide a load compensated
More informationFluid Cooling Industrial COLW Series
Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned
More informationCatalog Little Champ Hydraulic Power Unit Kits
Catalog Little Champ Hydraulic Power Unit Kits Table of Contents Continental Hydraulics Little Champ Power Unit Kits can be assembled at your facility, and at your convenience. You save time and money.
More informationFLUID HANDLING: Drum Filter Cart
FLUID HANDLING: Drum Filter Cart This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included
More informationPRPM2-A. = 5.5 Nm (4.1 lb.-ft.) (qual. 8.8 Nm (6.5 lb.-ft.) for socket cap screws. = 50 Nm (36.9 lb.-ft.) for cartridges
Technical Information General Description proportional pressure reducing valves keep a constant pressure p red on the secondary, or regulated, side, independent of pressure fluctuations on the primary
More informationD05 Directional Control Valves
Engineering D05 Directional Control Valves WFDG4S*4-01, 60 Design Wet Armature Solenoid Operated Max Pressure up to 248 Bar (3600 psi) Same Day Shipments www.fluidynefp.com Table of Contents Basic Characteristicts...2
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationFluid Cooling Brazed Plate BPSW Series
Fluid Cooling Brazed Plate BPSW Series 0916 STAINLESS STEEL CONSTRUCTION Performance Notes Short lead time Stacked plate Stainless steel Copper brazed (nickel option) Oil to water applications High performance
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationSECTION TITLE HEC2003/2004 SERIES SERVO VALVE SYSTEM ACCESSORIES KEY FEATURES
SECION ILE HEC2003/2004 SERIES SERVO VLVE SYSEM he HEC2003/2004 Series Servo System features a high response servo valve, a manifold mounted filter, and three different mechanical mounting options. he
More informationPortable Filter Carts. Models 5MFP & 10MFP with Modufl ow and Intelli-Cart
Models 5MFP & 10MFP with Modufl ow and Intelli-Cart 174 Applications Filtering new fluid before putting into service Transferring fluid from drums or storage tanks to system reservoirs Conditioning fluid
More informationPORTABLE LUBRICATION MANAGEMENT CATALOG. ForFluids.com
PORTABLE LUBRICATION MANAGEMENT CATALOG ForFluids.com D SERIES DRUM FILTER CART All-In-One Convenience! All-in-one convenience is what the DC-D Drum fi lter cart is all about. The simple practicality of
More informationAxial piston variable pump (A)A4VSO
Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit
More informationFLUID HANDLING: Drum Filter Cart
FLUID HANDLING: Drum Filter Cart This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included
More informationCatalog Little Champ Hydraulic Power Units
Catalog Little Champ Hydraulic Power Units 3 AND 5 Gallon Capacity General Specifications/Table of Contents Little Champ Power Units are designed for use in locations where space is limited and larger,
More informationGuardian Portable Filtration System
Guardian Portable Filtration System 173 Ground Support Hydraulic Service Mining The Guardian portable fi ltration system is a unique pump/motor/ fi lter combination designed for conditioning and transferring
More informationCenterFlo Pumps. Air Operated Double Diaphragm (AODD) Pumps. Automotive Commercial Industrial
CenterFlo Pumps Air Operated Double Diaphragm (AODD) Pumps Automotive Commercial Industrial CenterFlo NEW CenterFlo Technology Diaphragm Pumps Advanced Technology, Superior Performance, Low Maintenance.
More informationP.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
More informationPVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
More informationENGINEERING DATA. Quick Reference Chart. Variable Volume Vane Pumps Models SV-20 & SV-25 Flange & Subplate Mounted. Industrial Hydraulics
ENGINEERING DATA Industrial Hydraulics Variable Volume Vane Pumps Models SV-20 & SV-25 Flange & Subplate Mounted SYMBOL Quick Reference Chart GPM @ MAXIMUM PRESSURE THEORETICAL INPUT HP MODEL 100 PSI &
More informationSTREAMLINE SL-V Plus Series. 150 hp and 200 hp Pumps
STREAMLINE SL-V Plus Series 150 hp and 200 hp Pumps Company Background KMT Waterjet is a leading manufacturer of extreme-pressure waterjet systems. Having launched the waterjet industry in the early 1970
More informationINSTALLATION DIMENSIONS
ACCESSORIES & OTHERS PRESURE GAGE INSTALLATION DIMENSIONS UNIT mm(inch) LM TYPE CBM TYPE CBM-F TYPE MODEL B B1 D D1 D2 G H T d R G40LM 28.1(0.86) φ48(1.9) φ41.7(1.6) 8(0.31) 58.7(2.31) 1/8" G40CBM 26(1.02)
More informationPower Units. Page. (M) = Mobile (I) = Industrial (B) = Mobile & Industrial
Power Units Page (M) = Mobile (I) = Industrial () = Mobile & Industrial (I) 143-144 (I) 145-152 (I) 145-152 (I) 145-152 Power Units (Industrial) D-Pak 5 Gallon D-Pak style power units are ideal for many
More informationPressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
More informationFluid Cooling Mobile AOHM / AOVHM Series
Fluid Cooling Mobile Series 0916 Performance Notes AO/AOVH Series with hydraulic motor Adjustable louvers (manual) High heat removal Heavy duty construction Wide flow range Heat removal up to 210,000 BTU/HR
More informationCoolers. OK Series. Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF Cooling Systems Catalog. Applications
OK Series Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF 3-11 OKA 4-6 OKAF 4-6 OKA 8-11 OKAF 8-11 Description The OK Series cooler design uses a axial fan assembly which draws air through the cooler.
More informationFilter/Cooler Module. Advantages: RA 50127/ /12 Replaces: Model MFC3, MFN3, MNC3
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Filter/Cooler Module RA 50127/12.11 1/12 Replaces: 03.07 Model MFC3, MFN3, MNC3 4 19 Horsepower Removal
More information4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated Model 4 WRA(E)B Size 6 Series 1X
More informationStandard Power Units Start-Up and Maintenance
Standard Power Units Start-Up and Maintenance Value-Pak System-Pak System Pak-Plus Low-Pak System-Center System-L System-Overhead Table of Contents General Information....................................................................
More informationWagner Chip/Coal Dozer Brake System
Section 4-1 Introduction Wagner Chip/Coal Dozer Brake System First used on CHD100-282 and CD1000-129 These service instructions were developed to help you with troubleshooting the brake system of the Wagner
More informationStandard Power Packs Variable Displacement
Standard Power Packs Variable Displacement Designed for Industrial Applications... Delivered in Minimal Time... Standard Features: Pressures up to 000 PSI max. Flow: 4.2 to 1 GPM Variable displacement
More informationHY-PRO FILTRATION. FSL Filter Unit Flow rate up to 22 gpm (83 lpm)
FSL HY-PRO FILTRATION Materials of Construction Assembly Frame: Painted Steel Drip Pan: Painted Steel Filter Assembly: Epoxy coated steel 25 or 50 psid bypass available True differential pressure indicator
More informationFill cap with inlet strainer (40 mesh) Automatic approved quick connect inlet (no strainer)
GPO ubricator Motor-driven gear pump, Oil General The GPO ubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors
More informationPVV Open Loop Pumps. Bulletin D
PVV Open Loop Pumps Bulletin 47028-D Table of Contents Table of Contents Performance Assurance page 3 Features and Benefits 4-5 Specifications 6 Controls Single Pressure Compensator 7 Single Pressure Compensator
More informationLMP series
Low & Medium Pressure fi lters LMP 95-95-95 series Maximum working pressure up to.5 MPa (5 bar) - Flow rate up to 000 l/min 7 Low & Medium Pressure filters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE
More informationEFC. Electronically Adjustable Proportional Pressure Compensated Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. 3000 psi (207 bar) rating. Weighs 8-1/2 lbs. (3.9 kg). Standard Port size #12SAE (1-1/16 12). 10-Micron Filtration Recommended.
More informationContents. Directional Control Valve 2 Series EPCV 452. Page 3. General Information. Page 4-5. Technical data. Page 6. Performance Curves.
Contents Page 3 Page 4-5 Page 6 Page 7 Page 8 Page 9 General Information Technical data Performance Curves Dimensions : Hydraulic Valve and Accumulator Hydraulic Schematics Order Code Directional Control
More informationLarge Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
More informationPressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications
More informationTPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationD/G-04 Series. Up to 3.0 gpm (11.3 l/min)
D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175
More informationOFFLINE SERIES GLOBAL STANDARD COOLER. p f
OFFLINE SERIES GLOBAL STANDARD COOLER Sales@SouthwestThermal.com p. 888-6-8 f. 80-484-0049 www.akgcoolers.com OIL-to-AIR COOLING SYSTEMS Product Information AKG Offline Series, based on AKG Cool-Line Series,
More informationvariable displacement DELTA SAE Serie m i
variable displacement pumps DELTA SAE Serie m i Contents xxx Range and characteristics... 1 Dimensions... 2 Performance.... 5 Control devices.... 4 to 8 Under development Delta pump with constant torque
More informationOff-Line Filtration OFF-LINE FILTRATION
Off-Line Filtration: Where and Why Used The Donaldson Filter Cart, Filter Panel and Filter Buddy offer convenient off-line filtration, flushing and fluid transfer.* Use them with your in-plant machinery
More informationLD Series Electronic Meters
LD Series Electronic Meters Manual and Preset Dispense Dispenses in gallons, quarts, pints and liters Easy to read LCD display with durable switches for long life Rugged engineered material for superior
More informationSeries 50Hz Metric Edition
MTH PUMPS 1 1 17 7 Series Hz Metric Edition Capacities to 7 LPM Heads to 3 Meters Low NPSH Requirements Flex Coupled MTH 1 1 17 7 Series regenerative turbine pumps represent the most economical, high performance
More informationD/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
More informationVariable Displacement Plug-In Motor A6VE
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series
More informationWE-5 Water Extractor. Operator s Manual
WE-5 Water Extractor Operator s Manual STARTING WITH S/N ASC-0WE5-506 Important: Be certain to specify the serial number of your Water Extractor when contacting Allied Systems. A Product of Sherwood, Oregon
More informationW1200 SERIES HYDRAULIC PUMP
W1200 SERIES HYDRAULIC PUMP HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide 2 Table of Contents Description Page Number W1200 Product Specifications and Performance
More informationVIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS
Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,
More informationDOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS)
DOUBLE, P.O. CHECK VALVES (PRE-ENGINEERED BLOCKS) SERIES DOUBLE PILOT OPERATED CHECK VALVE... HS3 Page HD1 Page HD2 SERIES DOUBLE PILOT OPERATED CHECK VALVE GPM PSI LPM BAR CAVITY MODEL PAGE 5 3500 19
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS FEATURES Variable displacement axial piston pumps swash plate design ideally suited for medium and high pressure open circuit applications. The compact design allows
More informationXCEL80 Steering Control Units
XCEL80 Steering Control Units XCEL80 Steering Unit SEPECIFICATION DATA Max. System Pressure 175 bar [2537 psi] Max. Back Pressure 21 bar [305 psi] Rated Flow 75 LPM [20 GPM] Input Torque Powered 1.3-2.4
More informationICSV3003 SALT AND SPREADER MODULE
ICSV3003 SALT AND SPREADER MODULE 1 ICSV3003... Quality at low price The ICSV3003 valve has been manufactured in order to offer to spreader users a proportional electrohydraulic control that is precise
More informationCentro-Matic Automatic Lubrication Systems FlowMaster Hydraulic Pump
FlowMaster Hydraulic Pump High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors with reciprocating pump tubes and flexible control features that perform in desert heat and arctic
More informationAxial Piston Variable Pump A10VO
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VO RA 92703/11.07 1/44 Replaces: 06.07 Data sheet eries 52/53 ize 10...85
More informationHYDRAULIC MOTORS HP APPLICATION GENERAL. » Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines
HYDRAULIC HP APPLICAION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» extile machines» Agricultural machines» Food industries» Grass cutting machinery etc. CONENS Specification
More informationXCITE Owner s Manual. Reso-not TM Damping System XCITE 1502C HYDRAULIC POWER SUPPLY
Reso-not TM Damping System XCITE Owner s Manual 1502C HYDRAULIC POWER SUPPLY Xcite Systems Corporation 675 Cincinnati RDS Batavia - 1 Pike Cincinnati, Ohio 45245 Tel: (239) 980-9093 Fax: (239) 985-0074
More informationSAE J1939 CAN compatible sensors for hydraulic system monitoring of flow, pressure and temperature on pumps, valves and hydrostatic transmissions
SAE J99 CAN compatible sensors for hydraulic system monitoring of flow, pressure and temperature on pumps, valves and hydrostatic transmissions Milwaukee, WI, USA Tel: + () 769-600 sales-us@webtec.com
More informationPressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 6 DP Nominal size 6 Series 5X Maximum operating pressure 315 bar (4600 PSI) Maximum flow 60 L/min
More informationHYDRAULIC MOTOR-BRAKE B/MR
HYDRAULI APPLIAION onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines Agriculture machines Food industries Mining machinery etc. ONENS Specification data... 22
More informationMINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM
MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM Muncie Power Products OPTIMUM Series gear pumps/motors offer premier performance for a wide variety of applications across several industries.
More informationCATALOG SUPPLEMENT LITTLE CHAMP TM
CTLOG SUPPLEMENT LITTLE CHMP TM ecause Continental Hydraulics is continually improving its products, specifications and appearance are subject to change without notice. Continental Hydraulics Division
More informationContents. Directional Control Valve 3 Series CV 452. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves.
Contents Page 3-4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 General Information Technical data Performance Curves Dimensions - Basics Valve Dimensions - LS Valve Secondary
More informationHigh Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors
High Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors Bulletin 650-Z1 High Pressure Gear Pumps and Gear Motors for today s demanding mobile and industrial applications. The PZG and MZG Series
More informationSignet 7000/7001 Vortex Flow Sensors * *
DN X DN X DN X DN X DN X DN X DN X Signet 7000/7001 Vortex Flow Sensors *3-7000.090* 3-7000.090 Rev. F 10/05 English English 1. Mounting Location... 1 2. Installation... 1 3. Wiring Preparation... 2 4.
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance
More informationRA / Internal Gear Pump Model GP3, Series 3X Fixed Displacement. Typical application:
Sizes 20 to 32 Internal Gear Pump Model GP3, Series 3X Fixed Displacement up to 5076 PSI 1.25 to 1.98 in 3 (350 bar) (20.6 to 32.5 cm 3 ) RA 10 234/07.97 Characteristics: Peak pressure of up to 5.076 PSI
More informationNew Fixed Displacement Industrial Hydraulic Power Packs
New Fixed Displacement Industrial Hydraulic Power Packs Designed for Industrial Applications... Delivered in Minimal Time... Standard Features: Pressures up to 3000 PSI Flow: 0.4 to 10 GPM Fixed displacement
More informationSolutions. We Manufacture. H y d r a u l i c s. Eaton Medium Duty Piston Pump. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton Medium Duty Piston Pump h y d r a u l i c s Model 70122, 70422, 70423, and 70523 or -Flow Compensated Piston Pumps We Manufacture April 1997 Solutions S o l u t i o
More informationPower Units and Valves
Power Units and Valves Page Power Units Valves, Mounting Kits & Manifolds Worksheet Features Gear Pump Vane Pump With Manifolds With D03 Manifolds Power Unit Matrix D03 Valves D03 Accessory Valves D03
More informationFORESTRY E Q U I P M E N T G SKIDDERS 540G-III 548G-III
FORESTRY E Q U I P M E N T G SKIDDERS 540G-III 548G-III Operator Station: Comforts such as swivel seat, ergonomically located controls, and all-season climate controls help keep productivity up. Grapple:
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates
More informationSeries 26 Model GEAR PUMPS. Quiet Operation. Improved Efficiency. Field Reversible MACMILLIN
Series 26 Model 26000 GEAR PUMPS Quiet Operation Improved Efficiency Field Reversible MACMILLIN MACMILLIN Series 26 High Pressure Gear Pump GEAR PUMPS Pressures to 3500 PSI Flow to 24.1 GPM Quiet Operation
More informationFixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design
Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Sizes 71 0 Nominal pressure 3 bar Peak pressure 400 bar RE 91455/01.94 RE 91455/01.94 Replaces 07.88 Other fixed displacement
More informationSafety & Shut-off Blocks
Safety & Shut-off Blocks Description HYDAC safety and shut-off blocks are designed to protect, shut-off, and discharge hydraulic accumulators or user units. The compact design simplifies the hydraulic
More informationLine mounting From SAE08 to SAE16 cavities. 15 l/min (3.9 US gpm) from -20 C (-4 F) to 80 C (176 F) from -20 C (-4 F) to 100 C (212 F)
PU.. type flow control pressure compensated valves - ways Line mounting From SE to SE cavities Technical specifications and diagrams are measured with mineral oil of cst viscosity at C ( F) temperature.
More information60Hz HORIZONTAL MULTISTAGE PUMPS
6Hz HORIZONTAL MULTISTAGE PUMPS INDEX EH Stainless Steel Horizontal Multistage Pump................................................................ 2 General Product Curves..................................................................................
More informationMonarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category.
Monarch D.C. Hydraulic Power Systems MODEL M-319 Description: Pump/Motor/Reservoir/Valve Check Valve 2-Way/2-Position Normally Closed Solenoid Operated Lowering Valve Externally Adjustable Relief Valve
More informationLWALR LIQUID COOLED LONG RUNNING GENSETS
ALPHA SERIES LIQUID COOLED LONG RUNNING GENSETS 10(A)*, 15(A), 20(A), 27(A) LISTER PETTER P TYPE ALTERNATOR 50 Hz; 1500 r/min; power outputs: 6.1 22.4 kva 60 Hz; 1800 r/min; power outputs: 7.4 28.6 kva
More informationPRESSURE FILTERS. BYPASS VALVE Setting: 170 kpa (1,7 bar) ± 10% WORKING TEMPERATURE From -25 to +110 C
COMPONENTS MATERIALS Head: Aluminium alloy Spinon cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile (FKM on request fluoroelastomer) Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO
More informationPilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
More informationC C C C C C With mounting bolts Bolt thread up to M10 Dipstick length up to 25.2 inch. 70.
O i l L e v e l D i p s t i c k s C4.0410 C4.0412 C4.0421 C4.0431 C4.0450 C4.0464 With mounting bolts Bolt thread up to M10 Dipstick length up to 25.2 inch 70.10-2us D e s c r i p t i o n Application Controlling
More informationNorth American 1177D-EP2 Control Valves for Air and Exhaust
Combustion North American 1177D-EP2 Control Valves for Air and Exhaust Bulletin 1177D-EP2 SPECIFICATIONS The 1177D-EP2 Control Valve is a electro-pneumatically controlled butterfly valve capable of handling
More informationThermostatic Control Valve
Thermostatic Control Valve Model J Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationMICROPUMP MAG-DRIVE GEAR PUMPS
MAG-DRIVE GEAR PUMPS REVISION # 1 DATE: 6-6-6 WETTED MATERIALS Pump housings: 316 stainless steel. Gears: PEEK. Gear shafts: 316 stainless steel. Gear shaft bearings: PEEK. Driven magnet: Totally encapsulated
More informationWorld Pressure Filters A New Standard in 7,000 psi Pressure Filters
World Pressure Filters A New Standard in 7, psi Pressure Filters 12 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
More informationSeries P Series P. Penguin Vertical Pump
Features: Choice of CPVC, PVDF, or Polypropylene Sealless Runs Dry Without Damage Self-Priming When Immersed No Metal Contact Chemical Resistant Extended Pump Lengths Available (See Bulletin 1) Recommended
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only
More informationAxial piston variable pump A7VO
Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program
More informationPortable Filter Carts and Kidney Loop Systems
Portable Filter Carts and Kidney Loop Systems Proven Performance Designed for use in the most demanding applications and environments Before: ISO 22/20/18 NAS 10 After: ISO 14/12/10 NAS 4 Reliable purification
More information