Portable Filter Carts and Kidney Loop Systems
|
|
|
- Clifton Hines
- 6 years ago
- Views:
Transcription
1 Portable Filter Carts and Kidney Loop Systems Proven Performance Designed for use in the most demanding applications and environments Before: ISO 22/20/18 NAS 10 After: ISO 14/12/10 NAS 4
2 Reliable purification of hydraulic and lubrication oils Particulate Removal We utilise high efficiency pleated microglass filter elements that are rated Beta>1000 per ISO to achieve very low particle counts (as low as ISO 14/13/11). Acid Removal We utilise Fullers Earth or Activated Alumina cartridges to neutralise acids, lower the TAN and improve the colour of the oil. Common Applications: New fill of Hydraulic and Lube Oil Systems including gearboxes. Kidney Loop Filtration of Hydraulic and Lube Oil Systems including gearboxes PAG/PAO and Synthetic Oils Varnish Removal The same filter housing can accept either granular adsorbent media to remove soluble varnish at warm oil temperatures or depth media filters to remove suspended varnish from oil at cooler temperatures. Water Removal Our water absorptive elements are capable of removing and retaining up to 7.5 litres of free water. EHC Fluids (FYRQUEL, Phosphate Ester) Coolants and Water Glycols Diesel Fuel and Heavy Fuel Oil Transformer Oil Compressor Oil 40 LPM Dual 820X Filter Cart for high viscosity oil 40 LPM 840X Kidney Loop Filtration System 40 LPM Dual Spin-on FIlter Cart
3 New Oil: It s not clean! Brand new oil in drums, totes and tanker trucks does not meet stringent OEM cleanliness and specifications. For this reason, brand new oils should be filtered before use. A filter cart should be used for oil transfer, new fill and top off. Heavy Duty Welded Steel Frame This cart will hold up to the toughest abuse! Differential Pressure Gauge For positive indication when the filter elements are plugged and need to be replaced Check Valve on System Discharge to prevent reverse flow Solid Rubber Wheels No more flat tires! Spill Containment Pan Mini-Mess Upstream and Downstream Sample Ports TEFC Electric Motor 20-Mesh Inlet Strainer for Pump Protection Positive Displacement Gear Pump with Integral Relief Valve
4 The Most Efficient Filter Elements OilQuip obtains its filter elements from a premium manufacturer in the United States (Oil Filtration Systems, LLC). These high efficiency elements are exceptional at particulate removal from all mineral based and synthetic hydraulic, lubrication, dielectric and fuel oils. They are constructed of the highest quality micro-fibrous glass filtration medias utilising serial filtration technology and the medias are layered to achieve optimal performance characteristics. OFS filter elements are suitable in the most demanding applications and they are designed and tested to provide the highest level of efficient with the maximum dirt holding capacity. All OFS filter elements have particulate removal efficiencies of Beta(c) > 1000 (99.9% for the stated micron size) which is based on ISO testing standards. They are available in a wide range of sizes to suit a range of applications (2.5, 5, 7, 12 and 22 micron). Optional Features 1. Electric Control Panel with illuminated onoff switch, Run light and Plugged Filter light with automatic system shut down 2. Inline digital particle monitor 3. USB port and software for downloading data to a laptop or PC 4. Explosion proof (NEMA 7, Class 1/Division 1 or Class 1/Division 2) 5. ATEX certified electric components SS or 316SS material of construction 7. ASME code stamped vessels Low Viscosity Systems These are the most economical versions that we offer, designed for use with light hydraulic and lube oils (ISO 32 - ISO 100) High Viscosity Systems Built with special pump/motor packages and filter housings sized for gear oils (ISO ISO 680), even at cold temperatures
5 Model Selection Key FC = Filter Cart FS = Filter Skid Flow Rate 3 = 3 GPM (~10 LPM) 5 = 5 GPM (~20 LPM) 7 = 7GPM (~25 LPM) 10 = 10 GPM (~40 LPM) 15 = 15 GPM (~55 LPM) FC 10 s514d/2 dpm ss ad 120 N4 V Z Filtration 2/S514D = (2) OFS-S514D Spin-on Filter Elements Plumbed in Parallel S514D/2 = (2) OFS-S514D Spin-on Filter Elements Plumbed in Series S514D = OFS-S514D Single Spin-on Filter Element High Viscosity/Capacity Filtration: 820X/2 = (2) OFS-820X Cartridge Elements Plumbed in Series 820X = OFS-820X Single Cartridge Element 840X = OFS-840X Single Cartridge Element Optional Equipment DPM = Digital Particle Monitor SS = Stainless Steel Wetted Components AD = Air Driven Motor Electrical Requirement 120 = 120V/1Ph/60Hz 220 = 220V/3Ph/50Hz 208 = 208V/3Ph/60Hz 380 = 380V/3Ph/50Hz 400 = 400V/3Ph/50Hz 415 = 415V/3Ph/50Hz 480 = 480V/3Ph/60Hz 575 = 575V/3Ph/50Hz Electrical Rating N4 = NEMA 4 N7 = NEMA 7 Explosion Proof Class 1 Div. 1 or Class 1 Div. 2 Custom Options Z = Custom Equipment (specified) Sealing V = Viton B = Buna N CONTACT US FOR DETAILS ON OUR FLEET AVAILABLE TO RENT OR PURCHASE Australian Depot: 3/34 Enterprise Street Cleveland Queensland 4163
High vacuum transformer oil purification (HVTOPS) & Dielectric OIL Purifier System (DOPS)
High vacuum transformer oil purification (HVTOPS) & Dielectric OIL Purifier System (DOPS) For achieving optimal fluid dielectric strength to meet or exceed stringent oem specifications Two ways to quickly
HY-PRO FILTRATION. FSL Filter Unit Flow rate up to 22 gpm (83 lpm)
FSL HY-PRO FILTRATION Materials of Construction Assembly Frame: Painted Steel Drip Pan: Painted Steel Filter Assembly: Epoxy coated steel 25 or 50 psid bypass available True differential pressure indicator
HY-PRO FILTRATION. FSL Filter Unit Flow rate up to 22 gpm (83 lpm)
HY-PRO FILTRATION Materials of Construction Assembly Frame: Painted Steel Drip Pan: Painted Steel Filter Assembly: Epoxy coated steel 25 or 50 psid bypass available True differential pressure indicator
Filter Cart. hyprofiltration.com/fc
Filter Cart A fully self-contained mobile solution for bulk oil handling, fluid transfer and reservoir or gearbox conditioning. Ideal for lower viscosity hydraulic oil, lube oil and diesel fuel. Engineered
Off-Line Filtration OFF-LINE FILTRATION
Off-Line Filtration: Where and Why Used The Donaldson Filter Cart, Filter Panel and Filter Buddy offer convenient off-line filtration, flushing and fluid transfer.* Use them with your in-plant machinery
CFU. Compact Filter Unit. hyprofiltration.com/cfu
CFU Compact Filter Unit Bigger isn t always better. The Compact Filter Unit provides you with the best filtration at a size you can take anywhere. Tried and true, the CFU is the ultimate filtration system
Fluid Handling: Panel Unit
Fluid Handling: Panel Unit A permanently mounted, continuous-duty system for critical applications or difficult to access equipment. It also can serve as a maintenance station. The Overview The Panel Unit:
FLUID HANDLING: Drum Filter Cart
FLUID HANDLING: Drum Filter Cart This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included
FCL Filter Cart Flow rate up to 22 gpm (82 lpm)
click here to return to website FCL Filter Cart Flow rate up to 22 gpm (82 lpm) Ideal for high viscosity Lubrication and hydraulic oils (ISOVG22 ~ ISOVG320) Filter new fluids during transfer and replenishment
FLUID HANDLING: Drum Filter Cart
FLUID HANDLING: Drum Filter Cart This cart is ideal for pre-cleaning, protecting, and transferring oil from a conveniently attachable, secured drum. A drum adapter kit with a desiccant breather is included
LF(M) High Viscosity Filter Assemblies. hyprofiltration.com/lf
LF(M) High Viscosity Filter Assemblies Low pressure filter assemblies optimized for high flow hydraulic, high viscosity lube and heavily contaminated fuel applications. Max Operating Pressure: 150 psi
Filtration Of Liquids & Gases From Coarse To Submicronic Customized Filtration Solutions Oil Purification Systems
Filtration Of Liquids & Gases From Coarse To Submicronic Customized Filtration Solutions Oil Purification Systems www.engfilt.com Multi-Use Compact Inline Filters In-Line Filters Up To 6,000 PSI Cartridge
LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to lpm, 4500 gpm.
HY-PRO FILTRATION LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to 16875 lpm, 4500 gpm Features, Benefits, Advantages Carbon steel construction standard (304
Bulk Liquid Filtration
Low Pressure, High Flow Filters Duramax Spin-On Filters Manifolds Breathers, Water Seperators Gauges, Valves, Test Points, more www.donaldson.com Brochure No. IH00501 Rev 4/05 Why install filtration on
Fluid Handling Products. Fluid Handling a proactive approach to contamination control. Portable Filtration. Dedicated Filtration
Fluid Handling Products Fluid Handling a proactive approach to contamination control Actively filtering lubricants can dramatically improve industrial equipment performance, preventing production downtime
Portable Filter Carts Models 5MF and 10MF
s Models 5MF and 10MF 161 Applications for Parker Filter Carts Filtering new fluid before putting into service Transferring fluid from drums or storage tanks to system reservoirs Conditioning fluid that
FSL. High Viscosity Filtration Systems. hyprofiltration.com/fsl
FSL High Viscosity Filtration Systems A dedicated contamination solution for bulk oil handling and fluid transfer. Designed to excel in filtering particulate from heavily contaminated oil, the FSL keeps
[You may download this article at: https://fluidsys.org/downloads/ ]
![[You may download this article at: https://fluidsys.org/downloads/ ]](/thumbs/79/79065708.jpg "[You may download this article at: https://fluidsys.org/downloads/ ]")
Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org
OFFLINE FILTRATION SYSTEMS
Offline Filtration Systems Today s hydraulic filter systems have seen a shift from reactionary to preventative, and even predictive maintenance. Total system contamination management begins with our Fluid
LF(M) High Viscosity Filter Assemblies. hyprofiltration.com/lf
LF(M) High Viscosity Filter Assemblies Low pressure filter assemblies optimized for high flow hydraulic, high viscosity lube and heavily contaminated fuel applications. Max Operating Pressure: 150 psi
LT Series Lubricant Management System (LT-LMS)
FLUID HANDLING: LT Series Lubricant Management System (LT-LMS) This system combines filtration, storage, and breathers in one simple solution to keep your lubricants clean and dry. The Overview The LT-LMS:
SMR Series. Submicronic Removal Fluid Purifi cation Systems
SMR Series Submicronic Removal Fluid Purifi cation Systems 201 SMR Series Applications The SMR Series is the smart purifi cation solution for fl uid fl ow in the 2-10 GPM (8-38 LPM) range. The SMR contains
Medium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to psi (379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters Donaldson Duramax
The Leader in Visual Lubrication Systems
The Leader in Visual Lubrication Systems Bulk Storage Systems Made in the U.S.A. Bulk Storage the OIL SAFE Way OIL SAFE Bulk Systems are the most feature rich and highest quality lubricant storage and
Portable Liquid Pump and Filter Systems Compressed Air-Powered Pump and Filter System
Portable Liquid Pump and Filter Systems Compressed Air-Powered Pump and Filter System Technical Bulletin C PORTABLE LIQUID PUMP AND FILTER SYSTEMS DESCRIPTION Filtration Systems Portable Liquid Pump &
Low Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS
Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters
Low Pressure Medium Pressure High Pressure Accessories Off-line Filtration
Front Donaldson Cover DeliversHeadline Should HYDRAULIC Be Centered SERVICE PARTS & In ACCESSORIES This Color Box GUIDE Low Pressure Medium Pressure High Pressure Accessories Off-line Filtration Donaldson
MATERIALS CARTRIDGES PRESSURES VALUES TESTS CARRIED OUT ON FILTER ELEMENTS
1 OIL FILTER DESCRIPTION Many years of in-field experience have shown the necessity of more and more efficient controls on the contamination level of hydraulic fluids and fuels. With this goal uppermost
Conditioning Specialists Online Monitoring Systems
Section 6: Conditioning Specialists Online Monitoring Systems Advantages of Online Monitoring There are advantages to using online monitoring in replacement of bottle sampling when testing for cleanliness
USPI Oil Defender System COLOR-CODED START/STOP DESICCANT BREATHERS OIL LEVEL SIGHT GLASSES STAINLESS STEEL TOTES
US Petrolon Industrial Oil Defender Lube Room Solution Combined storage and filtration systems provide the best solution for an efficient lube room to dispense fluids that are clean and dry from the start
FPK04 Max Flow: 100 gpm (379 lpm)
HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 4350 psi 30,015 kpa 300 bar Rated Static Burst to: Flow Range To: 9135 psi 63,000 kpa 630 bar 100 gpm 379 lpm Features The T-type ported
HIGH VISCOSITY FILTER SYSTEMS
HIGH VISCOSITY FILTER SYSTEMS High Viscosity Filter Cart P/N 36970 High Viscosity Hand Held P/N 36971 Owner's Manual Table of Contents Customer Satisfaction...2 Introduction...3 Typical Applications...3
Process Inline Filter Protective filter PLF2-9HF
Process Inline Filter Protective filter PLF2-9HF Specifications Nominal size: DN 300 - DN 600 Q s max: 3000 m 3 /h p s max: 16 bar Filtration ratings: 1-90 µm 1. GENERAL Product description Protective
US PETROLON. LUBRICATION & FILTRATION CATALOG
US PETROLON LUBRICATION & FILTRATION CATALOG wwwuspetroloncom 2 US PETROLON INDUSTRIAL about us IMPROVING MACHINERY LIFE WITH SPECIALTY LUBRICANTS AND FILTRATION 447 n 66th unit 3 lincoln, ne 68505 phone
DVX-DUPL DFS DVF-64, DVF-65 DVX. CLEANDiesel Vessels, Housings & Skid Systems DVF-64, DVF-65, DVX, DV, DVF, DFS
DVX-DUPL DFS DVF-64, DVF-65 DVX DVF SERIES DV SERIES CLEANDiesel Vessels, Housings & Skid Systems DVF-64, DVF-65, DVX, DV, DVF, DFS DVF-64, DVF-65 Small Housings for Diesel Fuel Filtration DESCRIPTION
Portable Filter Carts 10MFP with Moduflow
Portable Filter Carts 10MFP with Moduflow Applications for Portable Filter Carts Parker portable filter carts are the ideal way to prefilter and transfer fluids into reservoirs or to clean up existing
HIGH PRESSURE FILTERS Series HF2P
HIGH PRESSURE FILTERS Series HF2P Pressures to 3000 psi Flows to 25 GPM Port Size 3/4 APPLICATION HYDAC HF2 Inline High- Pressure Filters are designed for use on hydraulic power units, machine tools, plastics,
Your Partner in Filtration
Your Partner in Filtration American Filtration Technologies Timeline 1996 AFT Incorporated in the State of NY based on over 22 years experience in the filtration market, Richard Felber and Electrodes Inc.
12AT/50AT Series Spin-On Filters
1 Applications for Mobile Equipment Hydrostatic Drives Industrial Power Units Reservoir Breathers Often, economic conditions dictate what type of filter is used on a piece of equipment. When costs are
COMPLETE PRODUCT LINE. Kaydon Custom Filtration Corporation
E X T E N D I N G Y O U R E N E R G Y COMPLETE PRODUCT LINE Kaydon Custom Filtration Corporation E X T E N D I N G Y O U R E N E R G Y Kaydon Custom Filtration specializes in high-performance liquid separation
US PETROLON. LUBRICATION & FILTRATION CATALOG
US PETROLON LUBRICATION & FILTRATION CATALOG wwwuspetroloncom 2 US PETROLON INDUSTRIAL about us IMPROVING MACHINERY LIFE WITH SPECIALTY LUBRICANTS AND FILTRATION 447 n 66th unit 3 lincoln, ne 68505 phone
HIGH PERFORMANCE FILTERS INDUSTRIAL HYDRAULIC AND LUBRICATION APPLICATIONS
HIGH PERFORMANCE FILTERS INDUSTRIAL HYDRAULIC AND LUBRICATION APPLICATIONS Microfil III media are made from micro-fine glass fibers which are randomly laid into a multilayered web. The media are impregnated
RMF SYSTEMS BPU, BPUW, BPUS BY-PASS UNITS PURE POWER
RMF SYSTEMS PURE POWER BPU, BPUW, BPUS BY-PASS UNITS 2 BPU*A & BPU*B BY-PASS UNITS RMF SYSTEMS RADIAL MICRO FILTER UNITS ARE CHARACTERIZED BY THEIR EXTREMELY EFFICIENT FILTER ELEMENTS WITH A FINENESS OF
Applications. Compressor-Features The Vilter Advantages. LNG Boil Off Gas Gathering BIO - Gas Digester CO 2 Nitrogen Hydrogen Refrigerant
Parallex TM Slide System - It s the key to part load efficiencies far superior to twin screw compressors. Capacity and volume slides move independently of each other based on load, eliminating over or
A DIVISION OF DAKOTA FLUID POWER, INC.
A DIVISION OF DAKOTA FLUID POWER, INC. 2017 PRODUCT CATALOG Y2K FLUID POWER About: Markets We Serve: Y2K Fluid Power, a division of Dakota Fluid Power, Inc., is an original equipment manufacturer (OEM)
10 Hydraulic Filters
1 Hydraulic Filters Introduction.... 1- HF65 Series.... 1-9 HF66 Series.... 1-15 HF67 Series.... 1-21 HF68 Series.... 1-1 Dual Spin-On Assembly.... 1-5 Introduction Hydraulic Filtration Systems Cummins
HIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Side Mounting Series DF...QE Pressures to 4 psi Flows to 18 gpm HYDAC DF...QE High Pressure Filters are designed to be side mounted directly onto the
Pneumatic High-Viscosity Filtration System Instruction Manual
Pneumatic High-Viscosity Filtration System Instruction Manual P/N: 61512 05/17 1 2 Pneumatic High Viscosity Filtration Systems PN: 61512 14 April, 2009 rev A 36933 Pneumatic Hand Cart HV Filtration System
MPD Series. Medium Pressure Duplex
Medium Pressure Duplex 89 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
Products for Aviation Fuel Handling
Products for Aviation Fuel Handling The Hydraulic & Fuel Filtration Division (HFFD) of Parker Hannifin manufactures a wide range of best in class Parker Velcon filtration and separation solutions and fuel
Technical Specification Number S121 for Insulating Oil Purification Plant, Type E rev Q CONTENTS
CONTENTS 1. GENERAL 2. SCOPE OF SUPPLY 3. DUTY AND PERFORMANCE 4. PROCESS DESCRIPTION 5. MAIN COMPONENTS 6. INSTRUMENTATION 7. ALARMS AND INTERLOCKS 8. OPTIONAL EQUIPMENT AND ACCESSORIES 9. COMMISSIONING
TECHNICAL DATA. Replacement Elements. Standard Replacement Elements. Solberg Replacement Elements
Replacement s Standard Replacement s Solberg I.D. O.D. Polyester Cloth s Height 10C N/A 1-1/8-1/4-1/4 16C 1 - /16 4 - /8 0CP 19P 4 - /4 10 Micron Filtration Rated at 99% Efficiency Polyester Cloth s -
12CS Series. Coreless Spin-on Filter Max. 75 l/min - 35 bar. Environmentally friendly alternative for spin-in filtration.
12CS Series Coreless Spin-on Filter Max. 7 l/min - 3 bar Environmentally friendly alternative for spin-in filtration Lightweight, non-metallic element that can be incinerated The 12CS Series features a
10 Hydraulic Filters
1 Hydraulic Filters Introduction................................... 1-3 HF65 Series................................. 1-9 HF66 Series................................ 1-15 HF67 Series................................
FPK02 In-Line Cartridge Filters
HIGH PRESSURE FILTERS FPK2 Max Flow: gpm (9 lpm) FPK2 In-Line Cartridge Filters Working Pressures to: Rated Static Burst to: Flow Range to: 69 psi 42, kpa 42 bar 913 psi 63, kpa 63 bar gpm 9 lpm Features
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
HMK05/25 DURAMAX Spin-Ons
100 gpm, 378 lpm /5 DURAMAX Spin-Ons Working Pressures to: Rated Static Burst to: 350 psi 413 kpa 4.1 bar 800 psi 550 kpa 55. bar Flow Range to: 50 gpm 100 gpm 189 lpm 378 lpm Features (single) and (double)
Bulk Storage Systems. Clean Organized Safe Efficient Reliable
Bulk Storage Systems Clean Organized Safe Efficient Reliable BULK STORAGE THE OIL SAFE WAY THREE SYSTEM TYPES OIL SAFE Bulk Systems are the most feature rich and highest quality lubricant storage and dispensing
Filtering elements differential collapsing pressure tested in compliance with ISO 2941:
DESCRIPTION Many years of in-field experience have shown the necessity of more and more efficient controls on the contamination level of hydraulic fluids and fuels. With this goal uppermost in its mind,
Sampling kits and test suites
Shell LubeAnalyst Sampling kits and test suites Oil sampling kits and test suites Basic K1 - Transport Monitors wear & contamination Basic Plus K1+ - Transport Determines optimum drain intervals Differentials,
Doosan XHP1170FCAT Bid Specifications
MANUFACTURER MODEL Doosan Infracore XHP1170FCAT ENGINE TIER 3 Make CATERPILLAR Model C-15 Number of Cylinders 6 Cylinder Bore (in/mm) 5.4 (137) Cylinder Stroke (in/mm) 6.73 (15.2) Displacement (cu in/l)
Doosan XHP1170WCAT Bid Specifications
MANUFACTURER MODEL Doosan Infracore XHP1170WCAT ENGINE TIER 3 Make CATERPILLAR Model C-15 Number of Cylinders 6 Cylinder Bore (in/mm) 5.4 / 137 Cylinder Stroke (in/mm) 6.73 / 15.2 Displacement (cu in/l)
Filter solutions for Danfoss PAH, APP and CLP pumps
Data Sheet Filter solutions for Danfoss PAH, APP and CLP pumps Introduction To ensure optimum pump life, it is important that the incoming fluid is filtered properly. It is recommended to use filters from
Oil Conditioning Unit
66 Applications The Parker Oil Conditioning Units (OCU) are a family of off-line filtration packages designed to effectively remove water or particulate contamination from hydraulic and lube system fluids.
OUT (419) (610)
Station FS 30.71 (780) OUT 16.50 (419) 46.50 (1181) 10.50 (267) Metric dimensions in ( ). 24.00 (610) 26.91 (681) Description Features The Station (FS) is capable of flushing, filtering, and monitoring
Filtration Solutions for Oil and Air
Filtration Solutions for Oil and Air WWW.AYATER.COM AYATER is well established in the filtration industry as one of the leaders in its field, offering a wide range of standard, high quality products as
Ultipleat SRT Filters
Lenntech info@lenntech.com www.lenntech.com Tel. +31-15-261.09.00 Fax. +31-15-261.62.89 Ultipleat SRT Filters Stress Resistant Technology The Ultimate in Filter Design Ultipleat SRT Filters Pall s Ultipleat
HIGH PRESSURE FILTERS
APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 4 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold block
12AT/50AT Series. Spin-On Filters. Global Filtration Technology
1AT/5AT Series Spin-On Filters Global Filtration Technology 1 1AT/5AT Series Applications for Spin-On Filters n Mobile Equipment n Hydrostatic Drives n Industrial Power Units n Reservoir Breathers Often,
PLC-3000 zfa01. Portable Fluid Analysis. Global Filtration Technology
zfa01 Global Filtration Technology 157 Why on-site fluid analysis? Certification of fluid cleanliness levels Immediate and accurate results Early warning tool to help prevent catastrophic failures in critical
Be sure to order the correct number of elements: OLF 15 = 1, OLF 30 = 2, OLF 45 = 3, OLF 60 = 4
Replacement Elements OLF Offline Filters Model Code Micron Rating Media Type Part No. N15DM002 2 Dimicron 01251590 N15DM010 10 Dimicron 03115180 N15DM020 20 Dimicron 00349576 N15DM030 30 Dimicron 03048790
Process Inline Filter PLF1
Process Inline Filter PLF1 10 bar 16 bar Specifications Nominal size: DN 50 DN 150 Q s max: 200 m 3 /h p s max: 16 bar Filtration ratings: 1 90 µm 1. GENERAL Product description Continuous separation of
Portable Filter Carts. Models 5MFP & 10MFP with Modufl ow and Intelli-Cart
Models 5MFP & 10MFP with Modufl ow and Intelli-Cart 174 Applications Filtering new fluid before putting into service Transferring fluid from drums or storage tanks to system reservoirs Conditioning fluid
MPD Series. Medium Pressure Duplex
Medium Pressure Duplex 81 Applications of MPD Circulating Lube Oil Systems Power Generation Control Systems Steel Mill Control Systems Pulp & Paper Control Systems Test Stands Automotive Stamping Presses
RMF SYSTEMS CONDITION MONITORING CENTER PURE POWER
RMF SYSTEMS PURE POWER CONDITION MONITORING CENTER Condition Monitoring Center WHERE CAN IT BE USED? Renewable energy Gearbox applications Automotive industry Paper industry Offshore systems Lubrication
Medium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to 2 psi (1379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters MEDIUM PRESSURE
Deister Machine Company, Inc. Heavy Duty System Saver Operating Instructions
June 8, 2005 Deister Machine Company, Inc. Heavy Duty System Saver Operating Instructions Equipment Description- The Deister System Saver is a portable hand held oil pumping and filtration unit designed
Introduction to Hydraulic Filtration
sales@nationalfiltersinc.com * www.nationalfilters.com 360 Industrial Parkway * Harbor Beach, MI USA * 48441 TF: 1-888-797-3275 * Tel: 989-479-3273 * Fax: 989-479-3251 1 What is Fluid Power? Fluid power
Fluid Maintenance. The hydraulic oil performs four functions in the hydraulic system:
The hydraulic oil performs four functions in the hydraulic system: Transmits Energy Coolant Lubricant Sealant Viscosity Viscosity is the rating of the oil thickness or resistance to flow. Viscosity is
Series 774 Automatic Skid Package
Fluid Engineering 1432 Walnut St Erie, PA 16502 USA PH 814.453.5014 FAX 814.452.6573 www.fluideng.com sales @fluideng.com CONTINUOUS FLOW The Fluid Engineering 774 Strainer Package is designed to handle
Hydraulic & Lubrication Filters
Hydraulic & Lubrication Filters Part II: Proper Filter Sizing Every filter has a minimum of two components. They are the filter housing and filter element. Most filters include an integral bypass valve.
SOLID/LIQUID SEPARATION AND COALESCING SYSTEMS
BULLETIN S-O171_B MAY 2004 SOLID/LIQUID SEPARATION AND COALESCING SYSTEMS PROTECT HYDRAULIC MACHINES FROM COSTLY REPAIR AND SHUT-DOWN EXTEND TOOL AND GRINDING WEEL LIFE, BY KEEPING COOL- ANTS FREE OF CHIPS
HPK04 Max Flow: 120 gpm (454 lpm)
HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 6000 psi 41,380 kpa 413.8 bar Rated Static Burst to: Flow Range To: 17000 psi 117,300 kpa 1173 bar 120 gpm 454 lpm Features The high
HIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
Installation Manual. Automated Fuel. Maintenance. System FUEL TECHNOLOGIES INTERNATIONAL LLC
Installation Manual Automated Fuel Maintenance System FTI-10A & FTI-20A FUEL TECHNOLOGIES INTERNATIONAL LLC Replacement Manuals Available on Website: www.fueltechnologiesinternational.com 03/01/2011 -
MICROPUMP MAG-DRIVE GEAR PUMPS
MAG-DRIVE GEAR PUMPS REVISION # 1 DATE: 6-6-6 WETTED MATERIALS Pump housings: 316 stainless steel. Gears: PEEK. Gear shafts: 316 stainless steel. Gear shaft bearings: PEEK. Driven magnet: Totally encapsulated
NFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports
NFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports PPLICTIONS HYDC NFHD Return Line Filters are designed for use on hydraulic power units, machine tools, plastics injection
MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
SPIN-ON FILTERS & ELEMENTS
ABSOLUTE RATED (BETA SPIN ) & NOMINAL RATED SPIN-ON FILTERS & ELEMENTS Single and Twin Element Models Pressures to 20 psi Flows to 120 gpm APPLICATION HYDAC Spin-On Filters are for filtration of hydraulic
IXON PUMPS. Innovative Fluid Transfer, Filtration, and Tank Cleaning Systems
IXON PUMPS Innovative Fluid Transfer, Filtration, and Tank Cleaning Systems ABOUT For more than 30 years, Dixon Pumps has manufactured high quality positive displacement transfer pumps and systems. Our
LIQUIDYNAMICS Light Viscosity Bulk Transfer Cart
This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. LIQUIDYNAMICS Light Viscosity Bulk Transfer Cart Instruction & Parts Manual This Manual Covers P/N 33271 P/N 33271
Low & High Pressure ProGuard Filters
56 ±.2 (2.2 ±.5) ø13 +1.5 (5.12 +.6 ) INDICATOR PLUG 193 (7.6) 14 (5.51) 95 (3.74) LABEL 1 5/8-12UNF IN. OR G 1 1/4 PORT SAE-2 PORT 2 PL'S 196 (7.72) 58 (2.28) ø13.2 (5.13) L (4 Low & High Pressure ProGuard
MODEL 4470GX. Ideal for grinding, honing, light metal removal.
Ideal for grinding, honing, light metal removal. MODEL GX The ChipMaster GX Series Gravity Filter System from Master Conveyors is a simple and efficient way to filter out a wide array of contaminates from
Des-Case Technical Bulletin Blake Nicodemus. Maintenance of Fire-Resistant Phosphate Ester Fluids
Des-Case Technical Bulletin Blake Nicodemus Maintenance of Fire-Resistant Phosphate Ester Fluids The United States is the highest producer of industrial lubricants in the world. These products are typically
PRODUCT BROCHURE. Innovative Fluid Transfer, Filtration, and Tank Cleaning Systems
PRODUCT BROCHURE The Blade Master impeller technology is the power behind every pump and pumping system we make. The patented wiper blade vanes and 3-lobe impeller design provide flow and vacuum performance
RP-CS 2-98 CERTA-SEAL LIQUID BAG FILTERS WITH THE MATCHED PERFORMANCE DESIGN. Products
RP-CS 2-98 CERTA-SEAL LIQUID BAG FILTERS WITH THE MATCHED PERFORMANCE DESIGN R Products INTRODUCING CERTA-SEAL LIQUID BAG FILTERS... A BETTER DESIGN RIGHT DOWN TO THE LAST NUT AND BOLT Plastic handles
Clean Fuel & Lubricant Solutions
Clean Fuel & Lubricant Solutions Filters Filter Heads Manifolds Kits Fuel Carts hp Filters and Heads DEF TRAP Accessories Why Filter Fuels & Lubricants? Today s sophisticated equipment, such as diesel
Series RFL In-Line Filter
APPLICATION Series RFL In-Line Filter Pressures 2 bar Flows to 400 l/min HYDAC RFL In-Line Filters are designed for in-line mounting. These filters can be used in hydraulic, flushing, and for extraction
Jet Fuel Conductivity Analysers & Additive Management systems
Jet Fuel Conductivity Analysers & Additive Management systems ASTM D2624 IP 274 DEF STAN 91-91 ASTM D1655 Conductivity in Fuels Conductivity is a significant parameter for safe and economic handling of
Filtration Technology ISO 9001 Qualified
Micro-Filter & Filter Water Separator Gasoline, Diesel Oil, Jet Fuel AIRPORT TERMINALS PIPELINE REFINERY Filtration Technology ISO 9001 Qualified 1 Filtration & Separation Filter Water Separator APPLICATIONS