TECDOS Omega Drive. TOUGH DRIVE for any environment. For horizontal, vertical and rotational drive applications. Problems you may have encountered

Size: px

Start display at page:

Download "TECDOS Omega Drive. TOUGH DRIVE for any environment. For horizontal, vertical and rotational drive applications. Problems you may have encountered"

Theodore Griffith
5 years ago
Views:

2 TECDOS Omega Drive TOUGH DRIVE for any environment For horizontal, vertical and rotational drive applications Advantage Round steel chain Advantage Minimum wear 2 Problems you may have encountered Disadvantages of Roller Chain A corroded chain will cause blocking. Restricted to use in one plane only/ No storage of loose chain possible/ Disadvantages of Hydraulic Cylinders Buckling. Operation in rough environments will increase maintenance costs. Large space requirements. Not suitable for use in high temperature environments.

Disadvantages of Wire Rope The requirment of large radius Idler wheels.

Low resistance to heat. Potential for injuries should a breakage occur (whiplash effect).

3 Disadvantages of Rack and Pinion or Gear Rim Labour costs associated with the replacement of wear

3 Disadvantages of Wire Rope The requirment of large radius Idler wheels. Large space requirements to accommodate storage drum. Damage when operated in two planes. Low resistance to heat. Potential for injuries should a breakage occur (whiplash effect). Traction only possible at extremeties of wire rope. 3 Disadvantages of Rack and Pinion or Gear Rim Labour costs associated with the replacement of wear element rack or gear rim. Material can accumulate within the gaps between teeth risking blocking or jamming. Potential temperature differentials necessitate an expansion joint. High tooth contact pressure.

TECDOS Omega Drive TOUGH DRIVE for any environment For horizontal, vertical and rotational drive applications 4 OMEGA Drive This innovative drive concept offers quiet, reliable performance long after

This drive concept has proven itself in many applications all over the world. RUD Omega drive is the solution: for moving ship cranes, tracking solar panels to the sun, or simply traversing a machine.

4 TECDOS Omega Drive TOUGH DRIVE for any environment For horizontal, vertical and rotational drive applications 4 OMEGA Drive This innovative drive concept offers quiet, reliable performance long after rack and pinion drives, spindle drives or roller chains have given up. RUD Omega Drive is resistant to ice, dirt, rain and aggressive environments. This drive concept has proven itself in many applications all over the world. RUD Omega drive is the solution: for moving ship cranes, tracking solar panels to the sun, or simply traversing a machine. Working Dimensions weight Size load approx. Item No. [kn] Height Length Depth [kg] Omega Omega Omega Omega Omega Omega 43 TWIN Omega Omega , , Omega 260 TWIN , , Available chain lengths defined on page 6. Advantage Complete Supplier

5 TECDOS Omega Drive Application examples Moving ship crane Ship loader Ferry 5 Advantage Simple assembly Possible applications For industrial, maritime and maintenance applications requiring horizontal / vertical movements or rotation. TECDOS Omega is the drive solution of choice - providing safe, rated and reliable performance in a matched system.

TECDOS Heavy-duty chain Premium/Medium Wheels 6 Working Weight Item No. Chain length (m) Chain load [kn] approx.

54 7905141 7905150 7905140 7905149 7905139 7905148 7905138 7905147 200 200 TEC 12 12 1.10 7905106 7905117 7905105 7905116 7905104 7905115 7905130 7905114 150 150 TEC 25 25 2.

70 7904992 7905025 100 80 TEC 140 140 12.20 7904948 7905015 175 45 TEC 260 260 22.60 7904947 35 Other chain qualities, surfaces and dimensions available on request for your specific project.

galvanised Electrolytic metal deposition (6-10 µm) Under severe environmental conditions. TECDOS wheels When infrequent or frequent use is required. When operating exposed to the weather.

6 TECDOS Heavy-duty chain Premium/Medium Wheels 6 Working Weight Item No. Chain length (m) Chain load [kn] approx. (kg/m) 10 m 20 m 30 m 50 m variable maximum length (m) Medium Premium Medium Premium Medium Premium Medium Premium Medium Premium Medium Premium TEC TEC TEC TEC TEC TEC TEC Other chain qualities, surfaces and dimensions available on request for your specific project. Surface Corrosion-protective coatings for TECDOS heavy-duty chains Short description of the surface coating New Condition After 100 h salt-spray test TECDOS is especially advantageous: Electrolytic galvanised Electrolytic metal deposition (6-10 µm) Under severe environmental conditions. TECDOS wheels When infrequent or frequent use is required. When operating exposed to the weather. In offshore or maritime applications. In underwater applications. When three-dimensional mobility is needed. When high forces have to be transmitted with limited space. Chain No. of pocket PCD approx. Hub length B [mm] Bore ø D Outside ø F max. bore Ø with key way [mm] No. of key ways Item No. TEC TEC TEC TEC TEC TEC * TEC * F D B *) Key way displaced by 120 The traction mechanism has to have optimal storage capacity. Rust and acid-resistant drive and guide wheels are also available on request. The bore and hub design can be made according to customer request. In case of spline connection please indicate respective DIN standard. The designer has to select a shaft-hub assembly strong enough to bear the forces it will have to withstand. All TECDOS pocket wheels are ready machined and case hardened.

TECDOS Chain Guides End fastener TECDOS chain guides are used: Under severe environmental conditions. When one chain strand is not loaded.

Two different executions: The milled TECDOS chain guide is used for heavy duty applications. The lasercut TECDOS chain guide is used for less loaded chains.

TEC 6 6 TEC 12 6 H04636 7902277 TEC 25 6 H04738 7902719 TEC 43 6 H04673 7902294 TEC 65 6 H04635 7902289 TEC 140 6 H04677 7902320 TEC 260 6 H04618 7902038 Chain

TEC 6 6 H04600 8503958 TEC 12 6 H04588 8503944 TEC 25 6 H04540 8503920 The selection of the chain guide depends on the application and the operation environment.

3 139.0 107.0 42.0 7993561 HEBG-M24 TEC 25 27.2 198.0 155.0 56.0 7997341 HEBG-M30 TEC 43 43.3 249.0 195.0 70.0 7997329 G A HEBG-M36 TEC 65 65.6 303.0 237.0 82.

0 7997420 TECDOS end fasteners are length-adjustable fixing points for connecting TECDOS heavy-duty chains to machines, structural elements and devices.

7 TECDOS Chain Guides End fastener TECDOS chain guides are used: Under severe environmental conditions. When one chain strand is not loaded. The chain is prone to jumping over the sprocket wheel. A smooth running of the chain over the sprocket wheel is required. Two different executions: The milled TECDOS chain guide is used for heavy duty applications. The lasercut TECDOS chain guide is used for less loaded chains. Chain guides - milled Chain Pocket Drawing No. Item No. TEC 6 6 TEC 12 6 H TEC 25 6 H TEC 43 6 H TEC 65 6 H TEC H TEC H Chain guides - laser profiled Chain Pocket Drawing No. Item No. TEC 6 6 H TEC 12 6 H TEC 25 6 H The selection of the chain guide depends on the application and the operation environment. Please contact us for advice. 7 Size Chain TECDOS end fastener Working load [kn] A D F Item No. F HEBG-M12 TEC HEBG-M16 TEC HEBG-M24 TEC HEBG-M30 TEC G A HEBG-M36 TEC HEBG-M42 TEC D HEBG-M48 TEC TECDOS end fasteners are length-adjustable fixing points for connecting TECDOS heavy-duty chains to machines, structural elements and devices. The maximum load on the component corresponds to the maximum load of the corresponding round steel chain. The design of the attachment point must be specified so that the applied initiated forces can be borne safely by the fixing part. The end-fixing must be fitted so that a force passes into the component along the longitudinal axis. A lateral load causing bending stress in the chain or the end-fastener is not allowed. During assembly, the end-fastener must be aligned so that the chain can be fitted without twisting.

8 Conveyor and Drive Systems Your contact RUD Australia 12 Commerce Place LARAPINTA Qld 4110 p f info@rud.com.au Branches: Perth & Newcastle

ROUND LINK CHAIN DRIVE SYSTEM

524 0508 274 366 customerservices@bridoncookes.co.nz Round Link Chain Drive Systems.... 526 Introduction.... 526 Solutions to Old Problems.... 527 Applications.... 528 Tecdos Omega Drive.... 529 Pocket