Clearwater Tech - Phone: Fax: Web: -
|
|
- Lesley Chapman
- 5 years ago
- Views:
Transcription
1 Feed-through terminal Disconnect-test terminal KZ 1.5 Feed-through terminal 1.5 KZ 2.5 Feed-through terminal 2.5 /Length/height with TS35x7.5 / 5.1 x 24.8 x / x 25.5 x / k/- 2 conductors with same cross-section (H05/H07) IEC EN WG WG / 2 SIR 02TEX3001 U / Nm (M 2.5) 7 / 3.0 x / Ex e II T II 2 G D IEC EN WG WG SIR 02TEX3001 U / / Nm (M 2.5) 7 / 3.0 x Ex e II T II 2 G D (P) Blue Wemid (P) beige (P) Blue (P) KZ KZ 1.5 BL KZ 1.5 order Nos and made from P with 2 flaability rating to UL 94 KZ KZ 2.5 BL KZ 2.5 order Nos and made from P with 2 flaability rating to UL 94 End plate / Partition plate End bracket Testing / Checking 10-pole beige Blue Wemid Blue Wemid Test plug Socket Q 2 KZ Q 3 KZ Q 4 KZ Q 10 KZ P KZ P KZ1.5 BL EW Q 2 KZ Q 3 KZ Q 4 KZ Q 10 KZ P KZ P KZ2.5 BL TW KZ TW KZ2.5 BL EW DEK 5/5 DEK 5/5
2 KZ 4 4 SKR x 27 x / x 42 x 31 / IEC Ex e II T II 2 G D EN WG WG r # i a SIR 02TEX3001 U / IEC WG WG # a Nm (M 3) E Tightening torque via the sockets is Nm. KZ KZ 4 BL KZ 4 order no and made of P with flaability class acc. to UL 94/-2 SKR SKR 15 2STB The ZH ZH 1.5 twin ferrules can be used. P KZ4 BL TW KZ4 BL P SKR BE TSCH 4 KZ EW EW ,5 QB 25 blank, refer to section. that max. conductor connection with QB = 2.5.
3 Modular PE terminals KE 2.5 PE terminal 2.5 KE 4 MS PE terminal 4 /Length/height with TS35x7.5 / 5.1 x 28 x 28 / PE 7 x 32 x 30 / PE to adjacent terminal Rated impulse withstand voltage to adjacent terminal Short-time withstand current Pollution severity Tightening torque range (fixing screw) k IEC Ex e II T II 2 G D EN WG WG WG (2.5 ) 3 SIR 02TEX3001 U / / Nm (M 2.5) Nm 7 / 3.0 x 0.5 IEC (4 ) # / Nm (M 3.5) Nm 9 / 0.6 x green/yellow (P) KE KE 4 MS DEK 5/5
4 KE 4 PE terminal 4 7 x 32 x 34.5 / PE IEC Ex e II T II 2 G D EN WG WG WG (4 ) 3 SIR 02TEX3001 U Nm (M 3) Nm 9 / 0.6 x 3.5 E KE ,5
5 Fuse terminals SK 1/15 4 /Length/height with TS35x7.5 8 x 58 x 34 / 6.3 / k/- 2 conductors with same cross-section (H05/H07) WG WG / Nm (M 3) 9 / 0.6 x 3.5 : max. conductor size = 2.5 when using the cross-connection. Twin wire-end ferrules ZH ZH 1.5 can be used. Without LED SK 1/ QB 2 WI R8 IS QB 3 WI R8 IS QB 4 WI R8 IS ,5 Contact Sleeve order no ; P SK 1 order no
6 with push-on connection KZ 4 SS SE 6.3/ KZ 4 SS W 2*2.8 1 /Length/height with TS35x7.5 / 6 x x / 6,3 2,8 6,3 2,8 6 x x / ,8 2,8 k/- 2 conductors with same cross-section (H05/H07) - - IEC / IEC WG WG / is 400 when insulation sleeves are used I max 20 valid when used with 2 x F 6.3 or 4 x F 2.8. IEC / IEC WG WG / 2 Slotted KZ 4 SS SE 6.3/ Not slit KZ 4 SS W 2X Q 2 KZ4SS Q 2 KZ4SS Q 3 KZ4SS Q 3 KZ4SS Q 4 KZ4SS Q 4 KZ4SS pole Q 10 KZ4SS Q 10 KZ4SS End plate / Partition plate Testing / Checking Test plug Socket Insulating sleeve 2,8 IH 2.8 DB IH 2.8 DB ,3 IH 6.3 WEM GE
7 KZ 4 S W 2*2.8 4 KZ 4 SF SE 6.3/ x 27 x 30 8 /... 2,8 2,8 6 x 27 x 30 8 / ,3 2,8 IEC / IEC IEC / IEC WG WG / WG r # E KZ 4 S W 2X KZ 4 SF SE 6.3/ IH 2.8 DB IH 2.8 DB IH 6.3 WEM GE
8 with solder connection KZ 1.5L S 1.5 KZ 4 L 4 /Length/height with TS35x7.5 5 x 34.4 x x 35.6 x 30 / 16 / / IEC / IEC IEC / IEC k/ WG / 2 # / Nm (M 2.5) 7 / 3.0 x WG WG beige KZ 1.5L S KZ 4L SL S Q 2 KZ Q 3 KZ Q 4 KZ pole Q 10 KZ Switchable link Switchable link L 2 KZ4/DK Connecting sleeve H 10/4/2.8 KZ Mounting screw BFSC M2.5X14 SKD2.5N Testing / Checking Test plug Socket End plate / Partition plate P KZ1.5W TW KZ4 HP/DBR/ TSCH 4 KZ Cover / warning label Cover / warning label D 4 KZ Mounting screw (plastic) BFSC M2.5X18 P/RT DEK 5/5
9 KZ 4 LL S 1.5 DK x 45.5 x 30 6 x 22 x / / IEC / IEC WG WG / WG WG # / Nm (M 3) 9 / 0.6 x 3.5 E KZ 4 LL S DK 1/ L 2 KZ4/DK H 10/4/2.8 KZ BFSC M2.5X14 SKD2.5N P DK TW DK1 HP/DBR/ TSCH 4 KZ D 4 KZ BFSC M2.5X18 P/RT
10 with solder connection TS 15 / KrG KZ 4 L KRG 4 K /Length/height with TS35x7.5 6 x 35.5 x 30 6 x 20 x 31 / 16 / 4 20 / IEC / IEC k/ WG WG / WG WG / / / Nm (M 2.5) 9 / 0.6 x 3.5 Medium yellow KZ 4L SL S KRG K Blue K 2.5 BL pole Switchable link Switchable link L 2 KZ4/DK Connecting sleeve H 10/4/2.8 KZ Mounting screw BFSC M2.5X14 SKD2.5N Testing / Checking Test plug Socket End plate / Partition plate Medium yellow P K Blue P K2.5 KRG/BL TSCH 4 KZ Cover / warning label Cover / warning label D 4 KZ Mounting screw (plastic) BFSC M2.5X18 P/RT
11 with Termi-Point / Wire-Wrap connection KZ 4 T 4 KZ 2.5K 2.5 /Length/height with TS35x7.5 / 6 x 27 x 10 / 4 5 x 29 x 46 8 / x IEC k/ WG WG WG WG / / / Nm (M 2.5) 7 / 3.0 x 0.5 E right KZ 4 SW 1X ertical right KZ 2.5 K SW U/ 1X pole End plate / Partition plate P KZ2.5K TW KZ TSCH 4 KZ Testing / Checking Test plug Socket DEK 5/5
Contents. SAK-Series combination foot TS 35 + TS 32. SAK-Series combination foot TS 35 + TS 32 C.1
ontents / P.2 Stud terminals.6 Fuse terminals / P.7 Earth conductor isolating terminals.8.1 / P SK 2.5/EN 2.5 SK 4/EN 4 /Length/height with TS35x7.5 / k/- Gauge to IE 60947-1 / UL94 Flaability class pprovals
More informationDatasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web: -
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
More informationNEW. Datasheet. WMF 2.5 Terminal Series
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
More informationClearwater D.94 Tech - Phone: Fax: Web: -
Modular design This mini-terminal family in tension clamp technology can be used to assemble individual blocks with 2- and 4-pole terminals. There are three different marking options for quick and clear
More informationFeed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35
General ordering data Order No. 1608570000 Part designation 2.5/4AN Version EAN 4008190077136 Qty. 100 pc(s). Feed-through terminal,, Tension clamp connection, Wemid, Product notes Product description
More informationDatasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data
Datasheet Art.No. 57.504.0055.6 Feed-through terminal WK 4 / U BLUE /V0 Feed-through DIN rail terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 4 mm², width 6
More informationTerminal blocks with clamping yoke and screw connection system
Overview W-Series Terminal blocks with clamping yoke and screw connection system High contact reliability for all standard electrical functions For a long time now, Weidmüller s W-Series terminal with
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More informationW-series W-series W-series sets standards! W-series offers advantages 1) Easy project planning 3) Time-saving potential distribution
2 -series -series -series -series sets standards! hen it comes to functional perfection even in details, eidmüller s -series defines the market standards for many years now! The -series comprises producte
More informationData sheet... W-Series WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000
More informationData sheet... W terminal earth terminal WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² N). General ordering data Order No. 1010100000 Type
More informationSAK A real classic that became synonymous with connection technology
SAK A real classic that became synonymous with technology Or Once upon a time there was a company called Weidmüller that created the best terminals in the world using plastic and metal. Weidmüller has
More informationData sheet. W-Series WDU 4 SL/EN
At Weidmüller, new solutions for the energy sector are developed according to local or application-based installation requirements. In some countries, control and protection of switching installations
More informationTerminal blocks with Push In connection technology. Product Information
Terminal blocks with Push In connection technology Product Information Overview Terminal blocks with Push In connection technology (P-Series) Less is more With the P-Series, Weidmuller is presenting a
More informationDatasheet. W-series terminal with clamping yoke connection WDU 4
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationPowermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
More informationOMNIMATE Power PCB terminals
Contents OMNIMTE ower OMNIMTE ower OMNIMTE ower Clamping yoke screw connection Explanation.2 Quick selection.4 roduct selection dimension 6.35.6 dimension 10.16.8 dimension 12.70.11 dimension 15.00.12.1
More informationMain catalogue. SNK Series Terminal Blocks Accessories Marking Solutions
Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions Summary See page 7 1SNK161026S0201 SNK Series, Terminal Blocks Screw clamp terminal blocks Accessories Marking solutions 1 A Smart
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationDatasheet. Ring Lug Terminal Blocks ST5, ST5-16mm 2, ST6 and ST25
Datasheet Ring Lug Terminal Blocks ST5, ST5-16mm 2, ST6 and ST25 Weidmuller s comprehensive range of bolt-type screw terminals offers secure connections for all power transmission applications. Bolt-type
More informationDatasheet. W-series terminal with clamping yoke connection WSI 6
The fuse terminals of the Weidmüller W Series are available in two different forms: Fuse terminal with pivoting retaining lever Fuse terminal with plug-in SIHA fuse holder General ordering data Order No.
More informationLoad and Motor Switches, Load-Break Switches Series 8549
www.stahl.de > Innovative switch concept > State-of-the-art contact arrangement > Easy and clear connection technology > Wiring channel for auxiliary contacts > Retrofittable: Pick-off terminal block Auxiliary
More informationControl switch/load disconnect switch Series 8008
> s Control switch with 2, 3 or 4 pole Load switch 3 pole + 1 auxiliary contact > Rated operational voltage up to 690 V AC > Positive opening contacts > Contacts suitable for EM-STOP > Isolating characteristics
More informationData sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
More informationData sheet TERMSERIES TRZ 120VUC 1CO
relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With screw and tension-clamp connection AgNi contact, optionally with hard gold-plated
More informationContent Modular terminals for high-temperature applications Nuclear power terminal blocks erminal Blocks T D.1
Content Modular terminals for high-temperature applications TS 32 / Ceramic.2 -.3 Nuclear power terminal blocks Overview.4 -.5.6 -.10 Terminal Blocks.1 Modular terminals for high-temperature applications
More informationonlinecomponents.com Terminal Blocks Frequently Asked Questions Terminal Blocks
Terminal Blocks Terminal Blocks Frequently Asked Questions Why use terminal blocks to connect instrumentation devices to the control unit? Instrumentation is used throughout a process plant. Long distances
More informationStud terminals. Overview Stud terminals WF / WFF. Stud terminals
Overview WF / WFF Power transmission Weidmüller s extensive range of stud terminals offers secure connections for all applications which entail a transmission of energy. The connection range extends from
More informationMK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG AWG AWG Rated surge voltage / pollution severity
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
More informationDatasheet. W-series terminal with clamping yoke connection WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationMotorized switch-disconnectors OTM 40 to 125 Amperes
Motorized switch-disconnectors OTM to 125 mperes With the new range of motorized-switch disconnectors, BB offers now a full range from to 2500 mperes. Thanks to the design, OTM...125 are a good solution
More informationSENTRON Switching and Protection Devices Switch Disconnectors
SENTRON Switching and Protection Devices Switch Disconnectors /2 Introduction 3K, 3KE, 3LD Switch Disconnectors 3K, 3KE Switch Disconnectors up to 1000 /4 General data /8 Floor mounting 3LD Main and EMERGENCY-STOP
More informationExtra functions. Phone: Fax: Web: Accessories P-Series. Terminals, P-Series
Accessories P-Series Terminals, P-Series Extra functions B Introduction The accessories for our other ranges of modular terminals can also be used with the P-Series in order to reduce the number of variations.
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationDOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD
DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD PRODUCT INFORMATION Double-level terminal blocks SRKD SSLD CONTA-CLIP offers an innovative line of double-level feed-through terminals SRKD and protective-earth terminals
More information8WH6 ipo Installation Terminals
/2 Introduction /4 8WH through-type terminals /6 8WH through-type screw terminals /8 8WH N-conductor isolating terminals /10 8WH N-conductor isolating screw terminals /12 8WH installation terminals More
More informationHK-003,HC SERIES HK-003 HCSERIES. Modular Heavy-current connector WAIN 12-01
HK-00, SERIES HK-00 SERIES Modular Heavy-current connector 12-01 HK-00/0HK-00/2 Heavy-current inserts HE-006 HK-00 Technical characteristics Specifications Approvals Inserts Number of contacts Electrical
More informationPhone: Fax: Web: -
HK1-11 HKF1-11 HK-11 HKS-20 uxiliary contacts Mounting uxiliary contacts position Pilot duty rating Instantaneous Lagging / leading / max. 116 132 5x 9x quantity ac dc NO NC NO NC 2 - - - HK1-20 Right
More information- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
More informationFuse switch-disconnectors
Fuse switch-disconnector FH00 is intended fuse-links with blade contacts size 000 and 00. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
More informationZS4-SF1 Screw Clamp Terminal Block
Technical Datasheet 1SNK 161 011 D0201 ZS4-SF1 Screw Clamp Terminal Block Fuse Catalogue Page 1SNK 161 011 S0201 4 mm² 10 AWG 8 mm 0.315 in Spacing Features and Benefits 90 90 180 59.7 2.35" - Protect
More informationVarius SUMMARY OF MODELS
SUMMARY OF MODELS FH000 FH00 FH FH2 FH LTL4a Rated operating current I e 60 A 60 A 250 A 400 A 60 A 600 A Rated operating voltage AC/DC U e 690 V 690 V 690 V 690 V 690 V 690 V Size 000 00 2 4a Fuse-link
More information8WH6 ipo Plug-In Terminals
/ Introduction /3 /4 8WH6 through-type terminals /8 8WH6 fuse terminals /9 8WH6 isolating blade terminals /11 8WH6 isolating terminals /13 8WH6 two-tier terminals More technical product information: Service&Support
More informationMK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24..
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
More informationMULTIVERT 1000A Main Incomer, 690VAC
IEC FUSE SWITCH DISCONNECTORS NH VERTICAL FUSE SWITCH DISCONNECTOR FEATURES & BENEFITS MULTIVERT NH vertical fuse switch disconnectors meet all functions of NH fuse switch disconnectors. They are designed
More informationClearwater Tech - Phone: Fax: Web: -
Accessories Bus cables PROFIBUS-PA cables Straight version PROFIBUS-PA Ex i cables Straight version TM-I marker sleeve TM-I marker sleeve Designation Type Order No. Industrial zone PROFIBUS-PA cable One
More informationMS25, MST25, MS20, MST20
Versions: - MS25 with thermal and magnetic releases - MST25 with a thermal release - MS20 - with thermal and magnetic releases for single-phase consumers - MST20 with a thermal for single phase consumers
More informationPage. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases
Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar
More informationTMC 91H is now TMC 60 C Series
TMC 91H is now TMC 60 C Series The new Thermal Magnetic Circuit Breaker is once again available and better than ever! The new version is not only UL recognized with the same electrical performance as the
More informationTerminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals
Terminal Blocks 2013 Product Catalog Terminal Block Supplement Introduction 8WH6 ipo Plug-In Terminals 8WH6 ipo Installation Terminals 8WH2 Spring-Loaded Terminals 1 2 3 4 8WH 8WH5 Combination Plug-In
More informationTechnical Brochure. Rotary Type Installation Switches A, 500 V. Brochure OT_M 22 GB D Low Voltage Products
94 D 5384 Technical Brochure Rotary Type nstallation Switches 16...160 A, 500 V Brochure T_M 22 GB 99-08 Low Voltage Products 9809CD03 Rotary Type nstallation Switches 16 A...160 A ew features for installation
More informationAF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
More informationST 4-HESI (5X20) Extract from the online catalog. Order No.: Fuse terminal block for assembly on NS 35, for 5 x 20 cartridge fuse inserts
Extract from the online catalog ST 4-HESI (5X20) Order No.: 3036369 Fuse terminal block for assembly on NS 35, for 5 x 20 cartridge fuse inserts Commercial data EAN 4017918890476 Pack 50 pcs. Customs tariff
More informationAmerican Electrical, Inc. Full Line Catalog fourth edition
American Electrical, Inc. Full Line Catalog fourth edition Connection, Power, & Protection...for less think inside the box Company History American Electrical, Inc. was founded in 1997 by Thomas McCormick,
More informationMulti-pole terminal strips
Contents for direct mounting Screw connection.2 Screw connection ATEX approval.6.1 for direct mounting Screw connection MK 2/12 2.5 MK 3/2...12 2.5 Width/Height/ø mounting hole Length / mounting dimensions
More informationDBL distribution blocks 3x1 pole
TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"
More informationMULTIBLOC 3.ST8 Size 3, 630A, 690VAC, Design for Bottom Fitting, 3-,4-pole
MULTIBLOC 3.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 3.ST8 comprises NH fuse switch disconnectors for 630A. They are designed for bottom
More informationManual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationUSA Canada On the Internet: Toll Free wieland Product Range Electrical Connections
0.2 F 01/02 270 Excerpt from our master catalogue wiecon PCB terminals In Ageneral, all Wieland components which are obliged to have the identification are provided with the A mark Pluggable PCB terminals
More informationLoad and Motor Switches, Load-Break Switches Series 8544
www.stahl.de > Innovative switch concept > State-of-the-art contact arrangement > Easy and clear connection technology > Wiring channel for auxiliary contacts > Retrofittable: alligator clip auxiliary
More informationZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral
Technical Datasheet SNK6047D00 Catalogue Page ZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral Simplify your PE.N connection with ZS35-PE block connected to ZS35-BL through a premounted jumper. SNK6063F004
More informationThermal-Magnetic Circuit Breaker 201/-WA
Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring
More informationManual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationCONTA-CONNECT. Disconnect terminals TRK/STK 2/TK
CONTACONNECT s TRK/STK 2/TK s are commonly used within measurement and control systems. They provide assistance when troubleshooting in electrical facilities, when commissioning new facilities and when
More informationManual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationFuse switch-disconnectors
Fuse switch-disconnector FH000 is intended for fuse-links with blade contacts size 000. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
More informationPT 2,5-QUATTRO-PE. Extract from the online catalog. Order No.:
Extract from the online catalog PT 2,5-QUATTRO-PE Order No.: 3209594 Ground modular terminal block, Connection method: Push-in connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm, Color: green-yellow,
More information151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
More informationVarius SUMMARY OF MODELS
Varius SUMMARY OF MODELS Type FH00 FH1 FH2 FH3 LTL4a Rated operating current I e 160 A 160 A 250 A 400 A 630 A 1 600 A Rated operating voltage AC/DC U e 690 V 690 V 690 V 690 V 690 V 690 V Size 000 00
More informationB6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data
B6, B7, BC6, BC7, TBC7 - and 4-pole mini contactors VB6, VB7, VBC6, VBC7 - and 4-pole mini reversing contactors Main pole Utilization characteristics according to IEC Standards IEC/EN 60947-1, IEC/EN 60947-4-1
More informationSiemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage
SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution
More informationMotor Circuit Breakers C3
Motor Circuit Breakers C3 Motor protection rating up to 100 Amps Short circuit breaking capacity up to 100kA Phase failure protection DIN rail mounting Wide range of accessories Options and ordering codes
More informationPosition and Safety Switches
Siemens AG 20 Position and Safety Switches groups 41K, 42A /2 Introduction SIRIUS 3SE5 mechanical position switches /4 General data 3SE5, plastic enclosures /13 - Enclosure width 31 mm acc. to EN 50047
More informationCircuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases
Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters
More informationHS1C Interlock Switches with Solenoid
HSC es with The guard door remains locked until the machine stops completely. With the actuator mounted on the guard door and the interlock switch on the machine, the door is mechanically locked when closed.
More informationCONTA-CONNECT. Overview. Overview... 2 Our company... 3
SUPPLEMENTS CONTA-CONNECT Overview Overview... 2 Our company... 3 system SRK SSL... 4 Feed-through terminals SRK Protective earth terminals SSL... 8 Double-level terminal blocks SRKD SSLD... 6 Pick-off
More informationManual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
More informationElectronic Circuit Breaker ESS20-0..
Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode
More informationVB6, VB7 3-pole mini reversing contactors with screw terminals 4 to 5.5 kw AC operated
VB6, VB7 -pole mini reversing contactors with screw terminals 4 to 5.5 kw AC operated VB7-0-10 2CDC211006F0011 Description VB6, VB7 -pole compact design reversing contactors are space optimized control
More informationLINOCUR Size D02 63A 230VAC/440VAC
IEC FUSE SWITCH DISCONNECTORS D0 FUSE COMBINATION UNITS The D0 Linocur is a combination of switch disconnector fuse and Neozed 63A fuse-link, equiped with significant safety characeristics and sophisticated
More informationCONTA-CONNECT. Double-level terminal blocks ZRKD 2,5 Double-level protective earth terminal ZSLD 2,5
CONTA-CONNECT Double-level terminal blocks ZRKD 2,5 Double-level protective earth terminal ZSLD 2,5 With a width of just 5 mm, the new ZRKD series is available in thirteen versions and connects with stranded
More informationPT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:
Extract from the online catalog PT 2,5-TWIN/1P BU Order No.: 3209646 Feed-through terminal block, Connection method: Push-in / plug connection, Cross section: 0.14 mm² - 4 mm², AWG: 26-12, Width: 5.2 mm,
More informationUK 6-FSI/C. Extract from the online catalog. Order No.:
Extract from the online catalog UK 6-FSI/C Order No.: 3118203 Flat-type fuse terminal block, cross section: 0.2-6 mm², AWG: 26-8, width: 8.2 mm, color: black Commercial data EAN 4017918100605 Pack 50 pcs.
More informationRated voltage (V) Current (A) Stranded wire. Solid wire A.D.O. (AWG)
Characteristics (1) Dimensions are on DIN 3 rail : PR4 (Height 15 mm) Use of a PR3 rail : remove 7,5 mm on dimension B Use of a DIN 1 rail : remove 2,5 mm on dimension B remove 5 mm on dimension C Miniblocks
More informationStud connection system HSK
CONTA-CONNECT system HSK The newest generation of stud terminals from CONTA-CLIP offers secure connections for all energy-transmitting applications. Depending on the conductor cross-section, stud terminals
More informationManual motor starter magnetic only MO325
Data sheet Manual motor starter magnetic only MO325 Manual motor starters magnetic only are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF
More informationPIT 2,5-TG. Extract from the online catalog. Order No.:
Extract from the online catalog PIT 2,5-TG Order No.: 3210185 Disconnect terminal block, Connection type: Leg spring connection, Cross section: - 4 mm², AWG: 26-12, Nominal current: 20 A, Nominal voltage:
More informationSystem pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489
Data Sheet System pro M compact for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU200 M is BB s solution for UL 489 branch circuit protection
More informationSTS 2,5. Extract from the online catalog. Order No.:
Extract from the online catalog STS 2,5 Order No.: 3036398 Feed-through modular terminal block, Connection method: Springcage connection, Spring-cage connection, Cross section: 0.08 mm² - 4 mm², AWG 28-12,
More informationSL-SMT Pitch 3.81 NEW. Data Sheet PCB Products. PCB Connectors SL-SMT 3.81/SL 3.81 BL 3.81
NEW SL-SMT itch 3.81 Data Sheet CB roducts CB Connectors SL-SMT 3.81/SL 3.81 BL 3.81 The 3.81 mm (0.51 inch) pitch connector system extends the selection of connectors available to the designer in the
More informationEx d. S.1 series. - Zone 1, 2, 21, 22 - Group IIC - Aluminium junction boxes - Wide selection of models - IP66 / 67. SSC series
Ex d S S.1 series - Zone 1, 2, 21, 22 - Group IIC - Aluminium junction boxes - Wide selection of models - IP66 / 67 SSC series Temperature sensor box SWS series SF series A.117 S... series Junction boxes
More informationDIN Track Terminal Blocks with Screw Terminals
New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes with a nominal
More informationDIN Track Terminal Blocks with Screw Terminals XW5T
New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes with a nominal
More informationCam switches, Indication, Pushbuttons
Cam switches, Indication, Pushbuttons Feed-through terminals Feed-through connection terminals 2.5mm Current 26 amps - 750V / 24 amps - 800V 34 amps - 750V / 32 amps - 800V Width / Strip Length / Screw
More informationSafety rope switches with reset for emergency stop
Safety rope switches with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+ FP FD FL FC 22 33 34 LED signalling light CONDUIT ENTRIES For other available
More informationContents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
More informationNew in this catalogue
Terminals -Series New in this catalogue Pluggable cross-connections for DU.5 Page /4 Installation terminal blocks PE 35 N Page /4 Installation terminal blocks DU 35 N Page /9 different colour versions
More informationELWOOD HIGH PERFORMANCE MOTORS
SW SERIES WASHDOWN MOTOR DATA: M42X FRAME 115V Drive Supply Motor Data (160VDC Bus) MOTOR MODEL M422 L M423 S M422 L M423 S MECHANICAL DATA (1) Nm 0.62 0.99 0.62 0.99 lb in 5.49 8.81 5.49 8.81 Nm 1.86
More informationMiniature circuit-breaker (MCB) SH200M Series
Miniature circuit-breaker (MCB) SH200M Series 25 mm² cage terminals, a well proven and reliable technology. IP20 - finger safety. Scratch and solvent resistant marking due to laser printing. Easy identification
More informationMagnetic Overcurrent Circuit Breaker
Magnetic Overcurrent Circuit Breaker 808-... Description ngle pole miniaturised magnetic circuit breakers with unique highspeed operating mechanism and push/pull on/off manual actuation. Fitted with electrically
More information