Rated voltage (V) Current (A) Stranded wire. Solid wire A.D.O. (AWG)

Transcription

1 Characteristics (1) Dimensions are on DIN 3 rail : PR4 (Height 15 mm) Use of a PR3 rail : remove 7,5 mm on dimension B Use of a DIN 1 rail : remove 2,5 mm on dimension B remove 5 mm on dimension C Miniblocks Type Spacing (mm) A (mm) Dimensions B (mm) C (mm) Solid wire () clamp/spring Stranded wire () Connection clamp/spring Solid wire A.D.O. () Stranded wire A.D.O. () Wire stripping length (mm) (2) DR 1.5/ DR 1.5/ DR 4/ DR 4/6.P A/1s DR 2.5/5.2L Current (A) Electrical characteristics Rated voltage (V) Pulse voltage (kv) Operating Recomm. driver (mm) Torque (Nm) (2) center of rail DR 2.5/10.4L DS 2.5/5.2L DS 2.5/10.4L DH 2.5/5.2L DH 2.5/10.4L DB 2.5/5.2L DB 2.5/10.4L DR 2.5/10.P.4L A/1s DR 4/ DR 1.5/ DR 4/ DR 2.5/ DS 4/ DS 1.5/ DS 4/ DS 2.5/ DH 4/ DH 1.5/ DH 4/ DH 2.5/ DB 4/ DB 1.5/ DB 4/ DB 2.5/ DR 4/8.P A/1s DR 2.5/8.P A/1s 1 DIN 3 2 Dimension above the panel. 32 Low Voltage Products & Systems

2 - Wire size up to 12 - Mounting allowed on symmetrical rail - Using temperature -40 to +110 C - With or without ferrule DR 1,5/4 DR 1,5/5.1 DR 4/6.1 Protection terminal blocks DR 4/6.P Compression clamp miniblocks Block Rated Spacing Rated Part/number End section Jumper bar IP20 current Grey Grey poles poles mm 10 A mm 20 A Block Rated Spacing Short circuit Part/number End section current Green / Yellow Yellow mm 480 A/1s Grey Grey poles 3 poles 4 poles Grey Grey poles 3 poles 4 poles Mounting example Spring - miniblocks Miniblocks accessories Miniblocks Spring terminal block : n = 8 x 5 mm spacing max. or 4 x 10 mm spacing max. between 2 terminal blocks with mounting foot End stop : BADRL connection: n = 3 x 6 mm spacing max. or 2 x 8 mm spacing max. between 2 terminal blocks with mounting foot Flange Base mount with snap in mounting foot rail : Panel mounting with flange PR Not IP Low Voltage Products & Systems

3 Spring miniblocks - Wire size up to 12 - Mounting allowed on symmetrical rail ( or DIN 3) and snapped on panel or with flanges - Using temperature -40 to +110 C - With or without ferrule DIN 3 FLANGES SNAP ON Block Rated Spacing Rated Part/number End section Jumper bar IP20 current Grey Grey poles Blue poles poles DR 2,5/5.2L DIN 3 FLANGES SNAP ON DR 2,5/10.4L DS 2,5/5.2L DS 2,5/10.4L DH 2,5/5.2L DH 2,5/10.4L DB 2,5/5.2L DB 2,5/10.4L Grey Grey poles Blue poles poles Grey Grey poles Blue poles poles Grey Grey poles Blue poles poles Grey Grey poles Blue poles poles Grey Grey poles Blue poles poles Grey Grey - Kit poles Blue Kit poles poles Grey Grey - Kit poles Blue Kit poles poles Ground terminal blocks Block Rated Spacing Short circuit Part/number End section current Green / Yellow Grey DR 2,5/10.P.4L 10 mm 300 A/1s 1 2 flanges, Right and Left Kit Low Voltage Products & Systems 21

4 FLANGES SNAP ON DIN 3 DR 2,5/8. DR 4/8. DS 1,5/6. DS 4/6. DS 2,5/8. DS 4/8. DH 1,5/6. DH 4/6. DH 2,5/8. DH 4/8. DB 1,5/6. DB 4/6. DB 2,5/8. DB 4/8. DR 4/8.P. miniblocks - Wire size up to 12 ( clamp) and 14 () - Mounting allowed on symmetrical rail ( or DIN 3) and snapped on panel or with flanges - Temperature range -40 to +110 C - 2 wires of same gauge and type per connection Rated Rated Part/number Part/number Block Spacing current Compression clamp - - End section Jumper bar IP20 Grey Grey Grey poles DR 1,5/ Blue Blue poles poles Grey DR 4/ Ground terminal blocks Feed through miniblocks also available : 1 mm² - 5 mm spacing 4 mm² - 8 mm spacing Rated Short circuit Part/number Part/number Block Spacing current Compression clamp - - End section DR 2,5/8.P. Green/Yellow Green/Yellow Grey mm 300 A/1s Grey DIN 3 FLANGES SNAP ON Grey Grey Grey poles Blue Blue poles poles Grey Grey Grey Grey poles Blue Blue poles poles Grey Grey Grey Grey poles Blue Blue poles poles Grey Grey Grey Grey poles Blue Blue poles poles Grey Grey Grey Grey poles Blue Blue poles poles Grey Grey Grey Grey poles Blue Blue poles poles Grey Grey Grey Grey poles Blue Blue poles poles Grey Flange for compression clamp- terminal blocks 2 Flange for - terminal blocks 3 2 flanges Right and Left Kit 4 Comb-type jumper bar for compression clamp- terminal blocks (not IP20) 22 Low Voltage Products & Systems

5 Publication No. 1SXU B0201 (LV005) Printed in USA, October, 2004