Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series
|
|
- Juliet Carter
- 6 years ago
- Views:
Transcription
1 28 Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series Blown fuse indication Exchange of fuse Blown fuse indication by LED or neon lamp Before exchanging the fuse, pivot the fuse holder in the locked open position One end of the fuse is automatically ejected from the holder when opening the cover... CAGE CLAMP connection Connection of conductors Front-entry Commoning Distribution of current to several fuse protected circuits by using insulated touchproof jumpers Testing Voltage test, either at input or output with fuse holder in closed position (live) CAGE CLAMP clamps the following copper wires: * solid * For aluminum wire see notes in section 15! Through test with fuse holder in open position (no voltage) stranded Voltage test at input in the test slot of the current bar fine stranded, also with tinned single strands
2 ,... Description and Handling Exchange of fuse (continued) Spare fuse and can be easily removed by hand. Insert new fuse and snap the cover closed Storage of spare fuse (fuse holder without blown fuse indication) Touchproof protection Touchproof protection in all positions of the fuse holder Locked position Also in vertical assembly of the fused blocks safe locking of the fuse holder in pivoted open position Testing (continued) Testing of voltage at the output through separate test slot Current measuring between jumper slot and separate test slot Voltage testing at input with test plug adapter (shown) or test plug fine-stranded wire fine-stranded wire tip bonded with crimped ferrule ➊ ➊ When using wires with ferrules, it is necessary to use a terminal block one size larger than the nominal cross section of the wire. fine-stranded wire with crimped pin terminal
3 30 Fused Disconnect Terminal Blocks 4 mm 2 /AWG 12, for Miniature Metric Fuses 5 x 20 mm, 5 x 25 mm, 5 x 30 mm Series V/8 kv/3 ➊➋ 600 V, 10 A ➋ U2 10 A max. ➋ Terminal block width 8 mm / in L 9 10 mm / 0.3 in * U2KND:; * U2KN 800 V/8 kv/3 ➊➋ 30/65 V, 10 A ➋ U2 10 A max. ➋ Terminal block width 8 mm / in L 9 10 mm / 0.3 in ➊ 800 V = rated voltage 8 kv = rated surge voltage 3 = pollution degree (see also section 15) ➋ Nominal voltage and current are given by the LED or fuse Technical details see pages ➌ Leakage current in case of blown fuse: LED 6 ma, neon lamp < 0.4 ma Description Fused disconnect terminal block with pivotable fuse holder, for DIN 35 rail, for miniature metric fuses 5 x 20 mm 5 x 20 mm without blown fuse indication grey orange with blown fuse indication by LED grey 15 30V ➌ / grey V ➌ / x 25 mm 5 x 25 mm grey grey 15 30V ➌ / grey V ➌ / x 30 mm 5 x 30 mm grey Accessories Appropriate marking system WMB/WSB (see section 14) End and intermediate plate Adjacent jumper, insulated grey 15 30V ➌ / grey V ➌ / Test plug adapter, suitable for terminal blocks 1.5 mm 2 4 mm 2 /AWG Test plug, 6 mm /0.236 in wide, with CAGE CLAMP for 0.08 mm mm 2 /AWG Connecting strip, for ganging several fuse holders, length 1 m /3 3 Miniature metric fuse 5 mm /0.19 in wide for test plug (2.3 mm /0.091 in Ø) contact factory 5 mm /0.19 in wide for test plug (2.3 mm /0.091 in Ø) contact factory Dimensions (in mm) < 5,5 > > 8 < < 5,5 > > 8 < < 3 > < 3 > * For further approvals with corresponding ratings see section 15.
4 V/8 kv/3 ➊➋ 110/220V,10A➋ U2 10 A max. ➋ Terminal block width 8 mm / in L 9 10 mm / 0.3 in 800 V/8 kv/3 ➊ 600 V, 10 A U 2 16 A Terminal block width 8 mm / in L 9 10 mm / 0.3 in * U2N * U2fNDaJ:;{[ Application notes with blown fuse indication by neon lamp grey 230 V ➌ / grey 120 V ➌ / Disconnect terminal blocks with knife disconnect grey orange grey 230 V ➌ / grey 120 V ➌ / grey 230 V ➌ / grey 120 V ➌ / Appropriate marking system WMB/WSB (see section 14) Fused or fused disconnect terminal blocks with a width of 8 mm/0.315 in can be assembled adjacent to each other. At the end of an assembly, if there is no adjacent fused or fused disconnect terminal block, an end or intermediate plate must be used. 5 mm /0.19 in wide for test plug (2.3 mm /0.091 in Ø) 5 mm /0.19 in wide for test plug (2.3 mm /0.091 in Ø) contact factory Fuse holders are printed with correct fuse size and... < 5,5 > < 3 > > 8 <... are fitted with stops on the inside of the cover. For types 5 x 20 mm, 5 x 25 mm and 1 4 x 1
5 32 Fused Disconnect Terminal Blocks 4 mm 2 /AWG 12, for Miniature Metric Fuses 1 4 x 1, 1 4 x 1 1 4, Series V/8 kv/3 ➊➋ 600 V, 10 A ➋ U2 10 A max. ➋ Terminal block width 10 mm / in L 9 10 mm / 0.3 in * U2KND:; * U2KN 800 V/8 kv/3 ➊➋ 30/65 V, 10 A ➋ U2 10 A max. ➋ Terminal block width 10 mm / in L 9 10 mm / 0.3 in ➊ 800 V = rated voltage 8 kv = rated surge voltage 3 = pollution degree (see also section 15) ➋ Nominal voltage and current are given by the LED or fuse Technical details see pages ➌ Leakage current in case of blown fuse: LED 6 ma, neon lamp < 0.4 ma Description Fused disconnect terminal block, with pivotable fuse holder, 1 4 x 1 for DIN 35 rail, for miniature fuses 1 4 x x x without blown fuse indication grey grey with blown fuse indication by LED grey 15 30V ➌ / grey V ➌ / grey 15 30V ➌ / grey V ➌ / Accessories Appropriate marking system WMB/WSB (see section 14) End and intermediate plate Adjacent jumper, insulated Test plug adapter, suitable for terminal blocks 1.5 mm 2 4 mm 2 /AWG Test plug, 6 mm /0.236 in wide, with CAGE CLAMP for 0.08 mm mm 2 /AWG Connecting strip, for ganging several fuse holders, length 1 m /3 3 Miniature metric fuse 5 mm /0.19 in wide for test plug (2.3 mm /0.091 in Ø) contact factory 5 mm /0.19 in wide for test plug (2.3 mm /0.091 in Ø) contact factory Dimensions (in mm) < 5,5 > > 9 < < 5,5 > > 9 < < 3 > (_10_) < 3 > (_10_) * For further approvals with corresponding ratings see section 15.
6 V/8 kv/3 ➊➋ 110/220 V, 10 A ➋ U2 10 A max. ➋ Terminal block width 10 mm / in L 9 10 mm / 0.3 in * U2KN Application notes with blown fuse indication by neon lamp grey 230 V ➌ / grey 120 V ➌ / grey 230 V ➌ / grey 120 V ➌ / Appropriate marking system WMB/WSB (see section 14) 5 mm /0.19 in wide for test plug (2.3 mm /0.091 in Ø) In case of 10 mm /0.394 in wide fused terminal blocks a spacer is part of the terminal block and will be supplied as a standard. At the end of an assembly or if there is no adjacent fused terminal block, an end or intermediate plate must be used. contact factory 2 marker receptacles each per fuse holder for individual WMB Multi marking or WSB Quick marking (example: 8 mm /0.315 in terminal blocks) < 5,5 > < 3 > > 9 < (_10_) Ganging of several fuse holders with a connecting strip (example: 8 mm /0.315 in terminal blocks)
7 34 Pluggable Fuse Modules for Replaceable Miniature Fuses 4 mm 2 /AWG 12, Series 281 Pluggable fuse modules on terminal blocks for pluggable modules see W4, Volume V max.* 6.3 max. * Electrical ratings are given by the fuse or nominal voltage of the indicator lamp respectively. Technical details see pages < 4.5 mm /2.93 in > < ➊➋➌ > open side of terminal residual current in case of blown fuse LED 5 20 ma, Neon lamp < 0.4 ma Description Fuse plug, for miniature metric fuses 5 x 20 mm and 5 x 25 mm Fuse plug, same as above, with hole for one LED (for self-assembly) Fuse plug, same as above, with additional indicator lamp, LED, AC/DC 24 V, can be used in both switching directions Neon lamp AC/DC 120 V AC/DC 230 V Terminal blocks and accessories 2-cond. carrier term. block ➊, mm 2 /AWG stripped length 9 10 mm /0.3 in for 2-conductor 3-cond. carrier term. block ➋, mm 2 /AWG stripped length 9 10 mm /0.3 in for 3-conductor 4-cond. carrier term. block ➌, mm 2 /AWG stripped length 9 10 mm /0.3 in for 4-conductor Comb type jumper bar, insulated, see also page 2.44 Alternate comb type jumper bar, insulated, Operating tool, insulated, for comb jumpers Wire commoning chain, insulated, 50 connections, 8 A Shorting link, 5 x 20 mm / 0.20 x 0.9 in, 6.3 A, if the fuse plug is used as disconnect plug For further approvals with corresponding ratings see section mm /0.236 in wide with pull-tab mm /0.236 in wide with pull-tab mm /0.236 in wide with pull-tab / mm /0.236 in wide with pull-tab / / Appropriate Plug WSB 4 mm /0.15 in wide marking system T. bl. WMB/WSB Terminal block width 6 mm /0.236 in grey orange (4 x 25) grey (4 x 25) Terminal block width 6 mm /0.236 in grey orange (4 x 25) grey (4 x 25) Terminal block width 6 mm /0.236 in grey orange (4 x 25) grey (4 x 25) 2-way (4 x 25) 3-way (4 x 25) 5-way (4 x 25) 2-way (4 x 25) 2-way way way Max. commoning distance 120 mm /4.24 in black blue (10 x25) The use of pluggable fuse holders with rail mounted terminal blocks for protection of control circuits offers many advantages to the user since the function and the wiring are accomplished by two separate parts: no additional cost for assembly and wiring no risk of accidental contact with live parts during disconnection of fuse plug in case of exchanging a defective fuse the fuse plug is completely separated from the carrier terminal block therefore safe exchange of the fuse away from current carrying parts the fuse plug can be taken away by the serviceman avoiding unintentional reclosing of the circuit by another person quick exchange of a fuse by using a prepared stand-by plug. Further advantages: optional LED indicates blown fuse marking facility on the fuse plug for clear coordination to the correct (WSB-Quick Marking System 4 mm /0.15 in) two touchproof test slots high density with only 6 mm /0.236 in width of terminal block/fuse plug instead of a fuse, a shorting link may be used as a disconnect plug. When corresponding Neutral-circuit is adjacent to a fuse plug, a 5 mm /0.19 in. wide space saving terminal block may be used, as a 6 mm /0.236 in. fuse plug may overlap the terminal block. See right page for 5 mm /0.19 in wide carrier terminal blocks (can be used with end plate, for example). ➊ 59 mm /2.32 in ➋ 3.5 mm /2.89 in ➌ 86 mm /3.39 in 1 5 N L1 N L2 N L3 open side of terminal block left
8 Pluggable Fuse Modules for Replaceable Miniature Fuses 2.5 mm 2 /AWG 14, Series V max.* 5 A* * Electrical ratings are given by the fuse or nominal voltage of the indicator lamp respectively. Technical details see pages < 52.5 mm /2.0 in > open side of terminal residual current in case of blown fuse LED 5 20 ma < ➊➋➌➍➎➏ > Description Fuse plug, 5 mm /0.19in wide, with soldered miniature fuse Fuse plug, same as above, with additional indicator lamp, LED, DC V Terminal blocks and accessories 2-cond. carrier term. block, mm 2 /AWG stripped length 8 9 mm /0.33 in for 2-conductor 2-cond. carrier term. block, mm 2 /AWG stripped length 8 9 mm /0.33 in for 2-conductor 3-cond. carrier term. block, mm 2 /AWG stripped length 8 9 mm /0.33 in for 3-conductor 4-cond. carrier term. block, mm 2 /AWG stripped length 8 9 mm /0.33 in for 4-conductor 4-cond. carrier term. block, mm 2 /AWG stripped length 8 9 mm /0.33 in for 4-conductor Comb type jumper bar, insulated, see also page 2.44 Operating tool, insulated, for comb jumpers Wire commoning chain, insulated, 50 connections, 8 A For further approvals with corresponding ratings see section ma FF ma FF A FF A FF ma FF / ma FF / A FF / A FF / Appropriate marking system WMB/WSB (see section 14) Terminal block width 5 mm /0.19 in grey ➊ 100 orange (4 x 25) grey (4 x 25) Terminal block width 5 mm /0.19 in grey ➋ 100 orange (4 x 25) grey (4 x 25) Terminal block width 5 mm /0.19 in grey ➌ 100 orange (4 x 25) grey (4 x 25) Terminal block width 5 mm /0.19 in grey ➎ 100 grey ➍ 100 orange (4 x 25) grey (4 x 25) Terminal block width 5 mm /0.19 in grey ➏ 100 orange (4 x 25) grey (4 x 25) 2-way way way way way way Max. commoning distance 120 mm /4.24 in black blue The use of pluggable fuse holders with rail mounted terminal blocks for protection of control circuits offers many advantages to the user since the function and the wiring are accomplished by two separate parts: no additional cost for assembly and wiring no risk of accidental contact with live parts during disconnection quick exchange of fuse plug in case of blown fuse the fuse plug can be taken away by the serviceman avoiding unintentional reclosing of the circuit by another person Further advantages extremely high density with only 5 mm /0.19 in width of terminal block/fuse plug optional LED indicates blown fuse Wire commoning chain Carrier term. block open side of terminal block right Fuse plug / Through term. block Terminal block width ➊ 53 mm /2.09 in ➋ 50 mm /1.9 in ➌ 64 mm /2.52 in ➍ Terminal block marking in center position right 5 mm /2.95 in ➎ Terminal block marking in center position left 5 mm /2.95 in ➏ Terminal block marking on both sides 3 mm /2.8 in
9 36 Fuse Terminal Blocks 6 mm 2 /AWG 10, Series mm 2 AWG V/6 kv/3 max. ➊ 600 V, 10 A ➊ U 10 A max. ➊ 250 V, 10 A ➊ 2 Terminal block width 13 mm / in L mm / 0.49 in * U2K. * U2K mm 2 AWG V/6 kv/3 max. ➊ 600 V, 10 A ➊ U 10 A max. ➊ 250 V, 10 A ➊ 2 Terminal block width 13 mm / in L mm / 0.49 in ➊ 500 V = rated voltage 6 kv = rated surge voltage 3 = pollution degree (see also section 15) Nominal voltage and current are given by the LED or fuse Technical details see pages < 62 mm /2.44 in > < 54.5 mm /2.15 in > < 62 mm /2.44 in > < 56.5 mm /2.22 in > Description Fuse terminal block, for DIN 35 rail, for cartridges Fuse terminal block, without indicator grey, 5 x 20 mm Fuse terminal blocks, without indicator grey, 1 4 x grey, 1 4 x Accessories Appropriate marking system WMB/WSB (see section 14) End and intermediate plate Screwless end stop, for DIN 35 rail Adjacent jumper, insulated 4 mm /0.15 in thick orange (2 x 25) grey (2 x 25) 6 mm /0.236 in wide (4 x 25) 10 mm /0.394 in wide (2 x 25) I N 41 A grey (4 x 25) 4 mm /0.15 in thick orange (2 x 25) grey (2 x 25) 6 mm /0.236 in wide (4 x 25) 10 mm /0.394 in wide (2 x 25) I N 41 A grey (4 x 25) Test plug adapter, suitable for terminal blocks 1.5 mm 2 10 mm 2 /AWG 16 8 Test plug, 6 mm /0.236 in wide, with CAGE CLAMP for 0.08 mm mm 2 /AWG Miniature metric fuse, 5 x 20 mm, without indicator, 6.3 A /250 V, medium slow Miniature metric fuse, 5 x 25 mm, with indicator, 6.3 A /250 V, medium slow Miniature metric fuse, 5 x 25 mm, with indicator, 10 A /450 V, quick acting Miniature fuse, 1 4 x 1, without indicator, 10 A /240 V, acc. to BS 1362 Miniature fuse, 1 4 x 1 1 4, without indicator, 10 A /250 V, medium slow Miniature fuse, 1 4 x 1 1 4, without indicator, 10 A /500 V, very quick acting 8 mm /0.315 in wide (2 x 25) for test plug 4 mm /0.15 in Ø (20 x10) 8 mm /0.315 in wide (2 x 25) for test plug 4 mm /0.15 in Ø (20 x10) (20 x10) (20 x10) * For further approvals with corresponding ratings see section 15.
10 mm 2 AWG V/6 kv/3 max.➊ 600 V, 10 A ➊ U 10 A max. ➊ 250 V, 10 A ➊ 2 Terminal block width 13 mm / in L mm / 0.49 in mm 2 AWG V 24/110 V, 10 A ➊U 10 A max. ➊ 24/110 V, 10 A ➊ 2 Terminal block width 13 mm / in L mm / 0.49 in * U2K:. * U2K * U2K mm 2 AWG V 250 V, 10 A ➊ U 10 A max. ➊ 220 V, 10 A ➊ 2 Terminal block width 13 mm / in L mm / 0.49 in < 54.5 mm /2.15 in > < 56.5 mm /2.22 in > < 54.5 mm/2.15 in➋ 56.5 mm/2.22 in➌ > < 62 mm /2.44 in > < 62 mm /2.44 in > < 62 mm /2.44 in > Fuse terminal block, with indicator grey, 5 x 25 mm Fuse terminal blocks, with neon lamp AC/DC 120 V grey, 1 4 x / with LED DC 24 V grey, 1 4 x / Fuse terminal blocks, with neon lamp AC 250 V/DC 220 V grey, 5 x 20 mm ➋ 40 grey, 1 4 x /281-41➌40 4 mm /0.15 in thick orange (2 x 25) grey (2 x 25) Appropriate marking system WMB/WSB (see section 14) 4 mm /0.15 in thick orange (2 x 25) grey (2 x 25) 4 mm /0.15 in thick orange (2 x 25) grey (2 x 25) 6 mm /0.236 in wide (4 x 25) 10 mm /0.394 in wide (2 x 25) I N 41 A grey (4 x 25) 8 mm /0.315 in wide (2 x 25) for test plug 4 mm /0.15 in Ø 6 mm /0.236 in wide (4 x 25) 10 mm /0.394 in wide (2 x 25) I N 41 A grey (4 x 25) 8 mm /0.315 in wide (2 x 25) for test plug 4 mm /0.15 in Ø 6 mm /0.236 in wide (4 x 25) 10 mm /0.394 in wide (2 x 25) I N 41 A grey (4 x 25) 8 mm /0.315 in wide (2 x 25) for test plug 4 mm /0.15 in Ø (20 x10) (20 x10) (20 x10) (20 x10) (20 x10) (20 x10) (20 x10)
11 38 Notes on the Use of Terminal Blocks for Miniature Metric Fuses Terminal blocks for miniature metric fuses tested acc. to IEC or EN /VDE When selecting miniature metric fuses, the maximum power loss listed below should not be exceeded. The power loss is determined according to IEC or EN /VDE at 23 C. The temperature rise of the terminal blocks must be checked according their application and mounting. Higher ambient temperatures represent an additional impact on miniature metric fuses. Therefore, in such applications the rated current must be reduced if necessary. More details from the manufacturer. Miniature metric fuses 5 x 20 Series Overload Short circuit protection only and short circuit protection Individual arrangement In a group Individual arrangement In a group Fuse terminal blocks (with screw cap) front-entry (5 x 20 mm) W 2.5 W 4 W 4 W Fused disconnect terminal blocks for miniature metric fuses (5 x 20 mm) / / / / W 1.6 W 4 W 4 W Pluggable fuse modules for miniature metric fuses (5 x 20 mm) / W 1.6 W 4 W 4 W / /281-41
12 39 Miniature metric fuses 6.3 x 32 Series Overload Short circuit protection only and short circuit protection Individual arrangement In a group Individual arrangement In a group Fuse terminal blocks (with screw cap) front-entry (1/4 x 11/4 6.3 x 32 mm) / / / W 2.5 W 4 W 4 W Fused disconnect terminal blocks for miniature metric fuses (1/4 x 11/4 6.3 x 32 mm) / / W 1.6 W 4 W 2,5 W / / Fuse terminal block in individual arrangement Fuse terminal blocks in a group Terminal block assembly including one fuse terminal block and 4 through terminal blocks Terminal block assembly including 5 fuse terminal blocks
Distribution terminal block; 3 x CAGE CLAMP connection 10 mm²; 1 x screw-clamp connection 35 mm²
3 mm² - Item No: 284-62 Distribution terminal block; 3 x CAGE CLAMP connection 0 mm²; x screw-clamp connection 3 mm² Item No: 284-62 Distribution terminal block; 3 x CAGE CLAMP connection 0 mm²; x screw-clamp
More informationPrintview: Multilevel installation terminal block; N/L - Item No.:
Multilevel installation terminal block; N/L Item No: 777-649 Multilevel installation terminal block; N/L Marking Business data Supplier WAGO Item no 777-649 EAN 404498883047 Content Order amount 0 Customer
More informationOUR POWER TEAM. High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free
OUR POWER TEAM High-Current DIN-Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil) vibration-proof fast maintenance-free BENEFITS Primary applications: Energy-intensive industries, including
More informationPrintview: 2-conductor ground terminal block - Item No.:
2-conductor ground terminal block Item No: 282-07 2-conductor ground terminal block Marking Business data Supplier WAGO Item no 282-07 GTIN / EAN 4044408423 Content Order amount 0 Customer item number
More informationPrintview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No.
Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1- pole; CAGE CLAMP ; commoning option Item No: 745-871/006-000 Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning
More informationX-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks
X-COM - and X-COM S-SYSTEM Pluggable Rail-Mounted Terminal Blocks 2 Contents X-COM -SYSTEM 04 Installation 07 X-COM -SYSTEM at a Glance 08 X-COM S-SYSTEM 12 Installation 14 X-COM S-SYSTEM at a Glance 16
More informationViking 3 - Screw connection Disconnect terminal blocks
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...
More informationonlinecomponents.com
s ST Spring cage fuse terminal blocks from Phoenix Contact satisfy two important tasks of electrical connection systems. Firstly, they act as carriers for fuses and secondly, they assume the task of potential
More informationUSA Canada On the Internet: Toll Free wieland Product Range Electrical Connections
0.2 F 01/02 270 Excerpt from our master catalogue wiecon PCB terminals In Ageneral, all Wieland components which are obliged to have the identification are provided with the A mark Pluggable PCB terminals
More informationOur Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil)
Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (50 kcmil) Vibration-Proof Fast Maintenance-Free WAGO BENEFITS The key to WAGO s success: springs, not screws. This
More informationOur Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (350 kcmil)
Our Power Team High-Current, Rail-Mount Terminal Blocks for Conductors up to 185 mm 2 (50 kcmil) vibration-proof fast maintenance-free WAGO BENEFITS Using springs instead of screws is the key to WAGO s
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationDatasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web: -
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationApprovals (p. 906) 0 371 61 0 371 63 0 371 64 0 371 66 0 371 69 0 371 68 0 371 00 0 371 08 0 371 20 Connecting (p. 300) 1 connection - 1 entry/1 outlet ELECTRICAL FUNCTION TERMINAL BLOCKS INSULATION EQUIPOTENTIAL
More informationPrintview: 3-conductor ground terminal block; suitable for Ex e II applications - Item No.: /
Printview: 3-conductor ground terminal block; suitable for Ex e II applications - Item No: 28-687/999-90 3-conductor ground terminal block; suitable for Ex e II applications Item No: 28-687/999-90 3-conductor
More informationGeneral Purpose Relays Accessories. Accessories Miniature Relay PT
Miniature Relay PT n Easy replacement of relays on a densely packed DIN rail n No reduction of protection class or creepage/clearance with plastic retainer n Plug-in indicator- and protection modules n
More informationExtra functions. Phone: Fax: Web: Accessories P-Series. Terminals, P-Series
Accessories P-Series Terminals, P-Series Extra functions B Introduction The accessories for our other ranges of modular terminals can also be used with the P-Series in order to reduce the number of variations.
More informationIEC TERMINAL BLOCKS. Screw Clamp Connection. Feed Through DIN Rail 433. Ground DIN Rail 439. Fuse Holder DIN Rail 445. Disconnect DIN Rail 448
CONTROL LOGIC IEC TERMINAL BLOCKS TB c3controls line of IEC terminal blocks are both innovative and user-friendly. They are simple to install and are color-coded for easy circuit identification. From standard
More informationSeries 858, Relay Sockets with Industrial Relay
Series 858, Relay Sockets with Industrial Relay voltage: V DC 4 changeover contacts voltage: V DC 4 changeover contacts (gold contacts) * In order to prevent the gold layer from being damaged, these values
More informationNEW. Datasheet. WMF 2.5 Terminal Series
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
More informationMicro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
More informationBETA Switching Switches and Light Indicators
Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET
More informationGeneral Purpose Relays Accessories. Accessories Industrial Power Relay RT
Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5 mm / 5 mm; n New retainer clip with ejection function n Easy replacement of relays on a densely packed DIN rail n No reduction of
More informationV REG.-Nr. 6106, Z E SCHRACK. Accessories Industrial Power Relay RT. General Purpose Relays. pinnings 3.5mm / 5mm; relay height 15.
Accessories Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5mm / 5mm; relay height 15.7 mm n New retainer clip with ejection function n Easy replacement of relays on a densely packed
More information2 pole 10 A PCB mount A1 A
Series - Miniature general purpose relays - 0 A Features Printed circuit mount, general purpose, & Pole relays. - Pole 0 A. - Pole 0 A. - Pole A AC coils & DC coils Cadmium Free contacts (preferred version)
More informationStandard terminal blocks
T01005 001229 Standard terminal blocks DIN 1 - Spacing 6 mm + 0,05 (.28") M 4/6... Standard blocks Blue Orange Yellow Green ed Black White Brown Beige V0 Blue V0 M 4/6 0115 116.07 M 4/6.N 0125 116.01 M
More informationAccessories Miniature Relay PT (Continued)
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules
More informationThermal-Magnetic Circuit Breaker 201/-WA
Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring
More informationMK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG AWG AWG Rated surge voltage / pollution severity
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
More informationPrintview: Screwless end stop; 6 mm wide - Item No.:
Screwless end stop; 6 mm wide Item No: 249-116 Screwless end stop; 6 mm wide Marking Business data Supplier WAGO Item no 249-116 EAN 4017332270823 Content 1 Order amount 2 Customer item number Notes Fit
More informationRecommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications.
Metal-Enclosed Limit Switches ENM2 Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications. Product advantages Standard switch
More informationDirectory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
More information5 mm contact pin pitch PCB or 95 series sockets
1. = 12.4 1. = 12.4 44 Series - Miniature PCB relays 6-10 A Features 44.2 44.62 2 Pole relay range 44.2-2 Pole 6 A ( mm pin pitch) 44.62-2 Pole 10 A ( mm pin pitch) PCB mount - direct or via PCB socket
More informationMiniature Relay PT 2 pole 12 A, 3 pole 10 A or 4 pole 6 A DC- or AC-coil
2, 3 or 4 C/O contacts Switching performance up to 3000 VA Relay height 29 mm Cadmium-free contact material Mechanical indicator Manual test tab, optionally lockable. White marking tabs Applications Universal
More informationUK 6-FSI/C. Extract from the online catalog. Order No.:
Extract from the online catalog UK 6-FSI/C Order No.: 3118203 Flat-type fuse terminal block, cross section: 0.2-6 mm², AWG: 26-8, width: 8.2 mm, color: black Commercial data EAN 4017918100605 Pack 50 pcs.
More informationDouble-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / in
Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394 in Item No.: 736-704 Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394
More informationElectronic Circuit Breaker ESS20
Electronic Circuit Breaker ESS20 Description Electronic circuit breaker type ESS20 is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 24 V switch-mode
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More informationPIT 2,5-TG. Extract from the online catalog. Order No.:
Extract from the online catalog PIT 2,5-TG Order No.: 3210185 Disconnect terminal block, Connection type: Leg spring connection, Cross section: - 4 mm², AWG: 26-12, Nominal current: 20 A, Nominal voltage:
More informationMBS AG. CTB Plug-in current transformer MBS AG. Dimensions: General technical specifications:
CTB 31.35 Plug-in current transformer Dimensions: Primary conductor 1: 30x10 mm Primary conductor 2: 25x12 mm Primary conductor 3: 20x20 mm Round conductor: 26 mm Transformer width: 60 mm Transformer height:
More informationTerminal blocks with Push In connection technology. Product Information
Terminal blocks with Push In connection technology Product Information Overview Terminal blocks with Push In connection technology (P-Series) Less is more With the P-Series, Weidmuller is presenting a
More informationFuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More information94 Series - Socket overview for 55 series relays
94 Series - Socket overview for 55 series relays 94.04 See page 7 Module Socket Relay Description Mounting 99.02 94.02 55.32 Screw terminal (Box clamp) socket Panel or 35 mm rail - Coil indication and
More informationBLOCK CATALOG SUPPLEMENT LOREM IPSUM DELORE LOREM IPSUM DELORE LOREM IPSUM
TERMINAL BLOCK CATALOG SUPPLEMENT To be used in conjunction with c3controls Edition 20-105 full line catalog. TERMINAL BLOCK CATALOG SUPPLEMENT LOREM IPSUM DELORE LOREM IPSUM DELORE LOREM IPSUM New and
More informationDatasheet. W-series terminal with clamping yoke connection WSI 6
The fuse terminals of the Weidmüller W Series are available in two different forms: Fuse terminal with pivoting retaining lever Fuse terminal with plug-in SIHA fuse holder General ordering data Order No.
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A 55 Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More information55 Series - Miniature General Purpose Relays 5-10 A
Series - Miniature General Purpose Relays -0 A - Plug-in or P.C.B. versions - AC or DC coils - Lockable test button and mechanical flag indicator as standard on and CO relays types - Sockets and accessories:
More information40 Series - Miniature PCB relays A. Features
1. = 12.4 1. = 12.4 1. = 12.4 40 Series - Miniature PCB relays 8-10 - 16 A Features 40.31 40.1 40.2 1 & 2 Pole relay range 40.31-1 Pole 10 A (3. mm pin pitch) 40.1-1 Pole 10 A ( mm pin pitch) 40.2-2 Pole
More informationCO (DPDT) 16/25 250/ /440 2,000 4, /0.5/ /0.5/ (5/5) 300 (5/5) AgNi
46 Series - Miniature industrial relays 8-16 A Features 46.52 46.61 1 & 2 Pole relay range 46.52-2 Pole 8 A 46.61-1 Pole 16 A Socket mount or direct connection via Faston connectors AC coils & DC coils
More informationElectronic Circuit Breaker ESS20-0..
Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode
More informationSFS-UFS Single Foot Switches
SFS-UFS Single Foot Switches Technopolymer housing, shock proof Protection degree IP53 or IP65 13 contact blocks available Various auxiliary devices available UFS Series SFS Series Options & Ordering Codes
More informationPluggable interface relays RT, PT and MT range
Content Pluggable interface relays RT, PT, MT Benefits and advantages, approvals... 190 Ordering details... 191 Technical data... 194 Circuit diagrams... 19 Dimensional drawings... 19 189 Benefits and
More informationData sheet TERMSERIES TRZ 120VUC 1CO
relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With screw and tension-clamp connection AgNi contact, optionally with hard gold-plated
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationUnimate Range Pitch 5.08
itch 5.08 in headers Socket connectors CB connection Solder connection SLA 90 250 V / 17.5 A SLA 180 250 V / 17.5 A.2.3 Cable connection Clamping yoke connection TO clamp connection BLA 250 V / 17,5 A
More informationNA1FC7T. Fuse holder terminal blocks
NAFC7T 00 Fuse holder terminal blocks T0077 009 Fuse holder terminal blocks for 5 x 0 mm and 5 x 5 mm fuses DIN - DIN Spacing 8 mm (.5") M /8.SF... Spacing 8 mm (.5") M /8.SFT Standard 8 mm block. M /8.SF
More informationSCREW CONNECTION TERMINAL BLOCKS
Terminal, IEC Catalogs > Industrial Controls Catalog > Terminal and Wiring Systems > Terminal, IEC > Screw Connection Terminal SCREW CONNECTION TERMINAL BLOCKS Introduction Sensor Thermocouple Mini- Grounding
More informationInsulated multipole operating tools for front-entry terminal blocks. 1-pole pole pole
Operating Tools Operating tool with partially insulated shaft, ideal for operating terminal blocks Insulated multipole operating tools for front-entry terminal blocks Operating tool (DIN 524), ideal for
More informationMK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24..
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
More informationselos Wieland jumpering system Perfect technology Copper Steel Wieland marking system Reliable identification Perfect technology Extremely rugged!
selos Wieland jumpering system Perfect technology Steel Copper Perfect technology Copper current bar guarantees low contact resistance Steel spring guarantees strength, durability, and long-term stability
More informationNew VikingTM 3, the innovation
New VikingTM 3, the innovation Screw or automatic spring connection A new range, born of research & EXPERIENCE INDEX Screw connection... 2 Automatic spring connection... 4 Common accessories... 6 Selection
More informationSpring Cage Miniature Terminal Blocks FK-MPT 0,5/ -3,5
Spring Cage Miniature Terminal Blocks FK-MPT 0,5/ -3,5 The mini print terminals, FK-MPT 0,5 and FK-MPT 0,5 -H provide one double connection per position across a 3.5 mm pitch. This space-saving arrangement
More informationL1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel
Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.
More informationB6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data
B6, B7, BC6, BC7, TBC7 - and 4-pole mini contactors VB6, VB7, VBC6, VBC7 - and 4-pole mini reversing contactors Main pole Utilization characteristics according to IEC Standards IEC/EN 60947-1, IEC/EN 60947-4-1
More informationCircuit Breakers. DIN rail-mounted equipment protection
Phoenix Contact offers a full family of modular components covering virtually all of your industrial electrical and electronic needs as well as a broad range of value-added services. CLIPLINE DIN rail-mount
More informationBulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
More informationFUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
More informationTechnical Brochure. Rotary Type Installation Switches A, 500 V. Brochure OT_M 22 GB D Low Voltage Products
94 D 5384 Technical Brochure Rotary Type nstallation Switches 16...160 A, 500 V Brochure T_M 22 GB 99-08 Low Voltage Products 9809CD03 Rotary Type nstallation Switches 16 A...160 A ew features for installation
More informationInterchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI
. Technical Data and Specifications Ratings Frames EG, JG and LG EG JG LG Maximum rated current (amperes) 15, 160 1 50 400, 630 Breaker type 3 B B E S S H H C E S H C U X E S H C U X of poles 1, 3, 4,
More informationBulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
More informationHan ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B
Size 6 B - 24 B Features Easy bridging functionality of contacts by means of plug-in jumpers directly on the connector Fast realisation of potential multiplication as well as star and delta bridges Rapid
More informationHan-Power Energy Bus Components
HARTING Electric Han-Power Energy Bus Components People Power Partnership Han Data Sheet 0080-7 Han-Power T Han-Power T Part-Number Drawing Dimensions in mm 09 12 008 4701 Cable gland please order separately
More informationAF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals
AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals 25 to 55 A culus CE Application AF09... AF38 4-pole contactors are used for controlling power circuits up to 600 V AC and 240 V DC.
More informationData sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
More informationCable category. B Multi-core cables for domestic/handheld equipment Rubber insulation PVC insulation TPE insulation 0.
Table 12-1: current rating Technical Tables T12 Current ratings basic table ÖLFLEX For cables with a nominal voltage of up to 1000 V and for heat-resistant cables at an ambient temperature of +30 C. You
More informationBulletin 1492-J, -W 1492-L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks
Bulleting IEC Terminal Blocks Overview and Regulatory Information Bulletin -J, -W -L Type Screw Type Terminal Blocks Spring-Clamp Terminal Blocks Technology Screw terminations are a time-proven method
More informationApproved Standards. Ordering Information. Thermal Overload Relay J7TKN. Model Number Legend. Thermal Overload Relay. Accessories
Thermal Overload Relay J7TKN ) Thermal Overload Relay Direct and separate mounting Single phasing sensivity according to IEC 60947-4-1 Finger proof (BGV A2) Accessories Set for single mounting Approved
More informationAF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
More informationApproved Standards. Ordering Information. Mini Motor Contactor J7KNA. Model Number Legend. Main contactor. Accessories. Mini Motor Contactor J7KNA 1
Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC
More informationIsolating transformer DS0107. Three-phase isolating transformers for the supply of three-phase loads in medical locations
Three-phase isolating transformers for the supply of three-phase loads in medical locations DS0107_D00105_00_D_XXEN/05.2015 Three-phase isolating transformers for the supply of three-phase loads in medical
More informationDatasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
More informationNew VikingTM3, the innovation Screw or automatic spring connection
New VikingTM3, the innovation Screw or automatic spring connection EXB 08023 Headquarters LEGRAND SNC 87045 Limoges Cedex - France :+33555068787 Fax : + 33 5 55 06 74 55 www.legrandgroup.com A NEW RANGE,
More informationFUSOMAT Visible breaking and tripping fuse switches from 250 to 1250 A
Fuse protection The solution for > Motor load break > Protection of industrial cabinet > Electrical distribution fusom_063_b_1_cat Strong points > Tripping upon overload > High breaking capacity > Improved
More informationTime scale: from 0.05s to 100h Multi-function Plug-in for use with 90.02, 90.03, and sockets
86 Series - Timer modules Features 86.00 86.30 Timer modules for use in conjunction with relay & socket. 86.00 - Multi-function & multi-voltage timer module 86.30 - Bi-function & multi-voltage timer module
More information3RT14 Contactors with 3 Main Contacts
3RT14 Contactors with 3 Main Contacts for Switching Resistive Loads Contactor Size 3RT14 46 Mechanical endurance Oper. 10 million Electrical endurance Oper. 0.5 million C-1 utilization category at I e
More informationIndex. Manual Motor Starters 1. Auxiliary Contact Blocks 1. Trip Alarm Auxiliary 1. Switch. Shunt Release 1. Under-voltage Release 2.
Index Index Page Manual Motor Starters 1 Auxiliary Contact Blocks 1 Trip Alarm Auxiliary 1 Switch Shunt Release 1 Under-voltage Release 2 Accessories 2 Busbar Connectors 2 Enclosures 2 Leistung, kw C mv
More informationINNOZED D0 fuse-bases with touch protection
D0 fusebases with touch protection D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS is a fuse base for D0 fuselinks, sizes D0 and D02.
More informationINNOZED D0 fuse-bases with touch protection
INNOZED D0 fusebases with touch protection INNOZED D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS INNOZED is a fuse base for D0 fuselinks,
More informationApproved Standards. Motor Contactor. Main contactor. Accessoires. 21 Motor Contactor J7KN
Motor Contactor Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN rail) up to 45 kw Range from 4 to 110 kw (AC 3, 380/415V) Finger proof ( VBG 4) Accessoires
More informationSection 10: Terminal Blocks
Terminal Blocks Section : Terminal Blocks CR151K Resilient Modular Terminal Blocks DIN-rail Mounted Terminal Blocks (CR151K)...-2 Product Tables...-3, -4 Accessories...-3, -4 Technical Data...-5 Outlines
More information2 pole, 10 A AC/DC supply non polarized Plug-in for use with 94 series sockets
Miniature plug-in timers 7-10 A Plug-in timer.02-2 Pole 10 A.03-3 Pole 10 A.04-4 Pole 7 A Multifunctions Seven time scales, from 0.05 s to 100 h 94 series sockets for 35 mm rail (EN 60715) mount with push-in
More informationPT 2,5-TWIN/1P BU. Extract from the online catalog. Order No.:
Extract from the online catalog PT 2,5-TWIN/1P BU Order No.: 3209646 Feed-through modular terminal block, Connection method: Pushin / plug connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationFUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
More information- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
More informationINTRODUCTION. The plug-in connection on the cables and lightning arrestors, allows for easy installation and replacement.
INTRODUCTION The Power Systems 44 kv MiniSub TM is the most compact system at this voltage available. Utilizing a deadfront termination and lightning arrestor setup, it eliminates the line top or side
More informationSingle foot switches PX and PA series
A Single foot switches PX and PA series Selection diagram CARRYING ROD See page /10 ADDITIONAL METAL PROTECTION OPEN PROTECTIONS CLOSED PROTECTIONS PA PA 2 CONTACT BLOCKS COMBINATIONS 01 02 1NO+1NC snap
More informationTerminal blocks. J - Accessories. Summary. 1. Mounting rails End stops Circuit separators, seperator end sections...
160T001 060220 Terminal blocks - Accessories Summary 1. Mounting rails... 506 2. End stops... 508 3. Circuit separators, seperator end sections... 512 4. umper bars Screw clamp jumper bars... 514 Screwless
More information