Crimpmate Range pitch 5.00
|
|
- Alexander Johnson
- 5 years ago
- Views:
Transcription
1 Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1
2 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular two part PCB connector system with solder contacts. High connection density achieved by using several rows of pins which mate with crimp contacts. The two part connectors, in. pitch, can be coded and locked to the mating connector. 3. and. solder pin lengths available. Supplied in cardboard box. V (IEC) / 3V (U) 1A (IEC) / A (U) RSV1. S / RSV1. CB / H7V-K Conductor current to EN min. No. of poles (-pole) +7, +.99" 11,." +13, +.3",.173" Technical data Rated data to IEC -1 / IEC 19 Clamping range, max. Solid H(7) V-U Stranded H7 V-R Flexible H(7) V-K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade according to norm Tightening torque range Nm Rated current at ambient temperature C C A 1 Overvoltage category III III II Pollution severity 3 Rated voltage V 3 Rated impulse voltage kv.. a U 1977 rated data - E9 Rated voltage V 3 Rated current A r CSA C. rated data - R 397 Rated voltage V 3 Rated current A 13 Material data Type of insulating material Wemid (PA) Flaability class acc. U9 V- Contact base material Cu alloy Material of contact surface tinned Information Additional colours on request Rated current related to rated cross-section and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. 1 RSV1. S / RSV1. CB / HV-K. min. No. of poles (-pole) Conductor current to EN RSV1. S / RSV1. CB / H7V-K. Conductor current to EN Solder pin length 3.. Pitch. Poles (inch) Qty. Order No. Order No.. (.197) (.39) (.39) 1 1. (.91) (.9) (.9) (1.7)
3 RSV1. SF SN Accessories Drilling diagrams -pole pitch. Coding -pole..9" +7, +.99" +13, +.3" 11,." +17, +.9",.173" 9-pole..9" Solder pin length 3.. -pole 1-pole 7..37".13" Pitch. Poles (inch) Qty. Order No. Order No.. (.197) (.39) (.39) (.91) (.9) (.9) (1.7) pole 7..9" 7..37".13" 3-pole 7..9" ".3
4 pitch. RSV 1. B Derating curve RSV1. B SN Rectangular two part connector system with solder contacts for PCB applications. High connection density achieved by using several rows of pin mating with crimp contacts. The two part connectors, in. pitch, can be coded and locked to the mating connector. 3. and. solder pins available. Supplied in cardboard box. V (IEC) / 3V (U) 1A (IEC) / A (U) RSV1. B / RSV1. CS / H7V-K Conductor current to EN min. No. of poles (-pole) +7, +.99" 1,3.3" +, +.33",.17" Technical data Rated data to IEC -1 / IEC 19 Clamping range, max. Solid H(7) V-U Stranded H7 V-R Flexible H(7) V-K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade according to norm Tightening torque range Nm Rated current at ambient temperature C C A 1 Overvoltage category III III II Pollution severity 3 Rated voltage V 3 Rated impulse voltage kv.. a U 1977 rated data - E9 Rated voltage V 3 Rated current A r CSA C. rated data - R 397 Rated voltage V 3 Rated current A 13 Material data Type of insulating material Wemid (PA) Flaability class acc. U9 V- Contact base material Cu alloy Material of contact surface tinned Information Additional colours on request Rated current related to rated cross-section and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. RSV1. B / RSV1. CS / HV-K. min. No. of poles (-pole) 1 Conductor current to EN RSV1. B / RSV1. CS / H7V-K. Conductor current to EN Solder pin length 3.. Pitch. Poles (inch) Qty. Order No. Order No.. (.197) (.39) (.39) (.91) (.9) (.9) (1.7)
5 RSV1. BF SN Accessories Drilling diagrams -pole pitch. Coding -pole..9" +7, +.99" +, +.33" 1,3.3" +17, +.9",.17 9-pole..9" Solder pin length 3.. -pole 1-pole 7..37".13" Pitch. Poles (inch) Qty. Order No. Order No.. (.197) (.39) (.39) (.91) (.9) (.9) (1.7) pole 7..9" 7..37".13" 3-pole 7..9" ".
6 pitch. RSV 1. S Derating curve RSV1. S AU Rectangular two part PCB connector system with solder contacts. High connection density achieved by using several rows of pins which mate with crimp contacts. The two part connectors, in. pitch, can be coded and locked to the mating connector. 3. and. solder pin lengths available. Supplied in cardboard box. V (IEC) / 3V (U) 1A (IEC) / A (U) RSV1. S / RSV1. CB / H7V-K Conductor current to EN min. No. of poles (-pole) +7, +.99" 11,." +13, +.3",.173" Technical data Rated data to IEC -1 / IEC 19 Clamping range, max. Solid H(7) V-U Stranded H7 V-R Flexible H(7) V-K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade according to norm Tightening torque range Nm Rated current at ambient temperature C C A 1 Overvoltage category III III II Pollution severity 3 Rated voltage V 3 Rated impulse voltage kv.. a U 1977 rated data - E9 Rated voltage V 3 Rated current A r CSA C. rated data - R 397 Rated voltage V 3 Rated current A 13 Material data Type of insulating material Wemid (PA) Flaability class acc. U9 V- Contact base material Cu alloy Material of contact surface gold-plated Information Additional colours on request Rated current related to rated cross-section and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. 1 RSV1. S / RSV1. CB / HV-K. min. No. of poles (-pole) Conductor current to EN RSV1. S / RSV1. CB / H7V-K. Conductor current to EN Solder pin length 3.. Pitch. Poles (inch) Qty. Order No. Order No.. (.197) (.39) (.39) (.91) (.9) (.9) (1.7)
7 RSV1. SF AU Accessories Drilling diagrams -pole pitch. Coding -pole..9" +7, +.99" +13, +.3" 11,." +17, +.9",.173" 9-pole..9" Solder pin length 3.. -pole 1-pole 7..37".13" Pitch. Poles (inch) Qty. Order No. Order No.. (.197) (.39) (.39) (.91) (.9) (.9) (1.7) pole 7..9" 7..37".13" 3-pole 7..9" ".7
8 pitch. RSV 1. B Derating curve RSV1. B AU Rectangular two part connector system with solder contacts for PCB applications. High connection density achieved by using several rows of pin mating with crimp contacts. The two part connectors, in. pitch, can be coded and locked to the mating connector. 3. and. solder pins available. Supplied in cardboard box. V (IEC) / 3V (U) 1A (IEC) / A (U) RSV1. B / RSV1. CS / H7V-K Conductor current to EN min. No. of poles (-pole) +7, +.99" 1,3.3" +, +.33",.17" Technical data Rated data to IEC -1 / IEC 19 Clamping range, max. Solid H(7) V-U Stranded H7 V-R Flexible H(7) V-K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade according to norm Tightening torque range Nm Rated current at ambient temperature C C A 1 Overvoltage category III III II Pollution severity 3 Rated voltage V 3 Rated impulse voltage kv.. a U 1977 rated data - E9 Rated voltage V 3 Rated current A r CSA C. rated data - R 397 Rated voltage V 3 Rated current A 13 Material data Type of insulating material Wemid (PA) Flaability class acc. U9 V- Contact base material Cu alloy Material of contact surface gold-plated Information Additional colours on request Rated current related to rated cross-section and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. RSV1. B / RSV1. CS / HV-K. min. No. of poles (-pole) 1 Conductor current to EN RSV1. B / RSV1. CS / H7V-K. Conductor current to EN Solder pin length 3.. Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 113. (.39) (.39) 1 1. (.91) (.9) 117. (.9) (1.7)
9 RSV1. BF AU Accessories Drilling diagrams -pole pitch. Coding -pole..9" +7, +.99" +, +.33" 1,3.3" +17, +.9",.17 9-pole..9" Solder pin length 3.. -pole 1-pole 7..37".13" Pitch. Poles (inch) Qty. Order No. Order No.. (.197) (.39) (.39) (.91) (.9) (.9) (1.7) pole 7..9" 7..37".13" 3-pole 7..9" ".9
10 Male and female connectors with crimp connection pitch. RSV 1. C Derating curve RSV1. CS Rectangular two part connector system for use with crimp contacts. Can be used as universal coupling, and also available as a PCB variant. The CS 1. or CB 1. crimp contacts guarantee a high connection density. The two part connectors can be coded and locked to the mating connector. Supplied in cardboard box (IEC) / - AWG (U) 3 V (IEC) / V (U) 17 A (IEC) / A (U) RSV1. CB / RSV1. CS / H7V-K1. Conductor current to EN min. No. of poles (-pole) Technical data Rated data to IEC -1 / IEC 19 Clamping range, max Solid H(7) V-U Stranded H7 V-R Flexible H(7) V-K.. Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade according to norm Tightening torque range Nm Rated current at ambient temperature C C A 17 1 Overvoltage category III III II Pollution severity 3 Rated voltage V 3 Rated impulse voltage kv a U 1977 rated data - E9 Rated voltage V Rated current A - r CSA C. rated data - R 397 Rated voltage V Rated current A 13 - Material data Type of insulating material Wemid (PA) Flaability class acc. U9 V- Contact base material Cu alloy Material of contact surface Information Additional colours on request Rated current related to rated cross-section and min. No. of poles. Spacing between rows: see hole layout Rated cross-section depends on crimp contact used. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. RSV1. CB / RSV1. CS / HV-K. min. No. of poles (-pole) Conductor current to EN RSV1. CB / RSV1. CS / H7V-K. Conductor current to EN Solder pin length Colour grey Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 113. (.39) (.39) (.91) (.9) 117. (.9) (1.7) 119.
11 Male and female connectors with crimp connection RSV1. CB Accessories Mounting cutout pitch. Coding Cable grip Solder pin length Colour grey Spring clips ensure firm hold in enclosure wall Clip-on foot b R, max. a Mounting cutout for enclosure RSV 1. Wall thickness 1.. Crimping tool No. of poles Dim. a ()* Dim. b ()* Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 113. (.39) (.39) 1 1. (.91) (.9) 117. (.9) (1.7) *) Tolerance: +.3 Extractor Tool.11
12 Crimp contacts pitch. Contact system CB 1. / CS 1. CB 1. / CS 1. Crimp contacts.17"..11" CB.17" " CS.17" " Tinned contacts CS For cable size Insulation diameter AWG.1,. 1. pin standard pin standard.3... pin standard pin standard pin standard pin standard. 1.. pin standard Separate contacts Cont. on a strip Order No. Qty. Order No. Qty Gold-plated contacts defined contact points ensure high contact stability ugs in the enclosing steel spring ensure the contact engages securely in the housing Up to plugging cycles (gold version) Up to plugging cycles (tin version) For cable sizes Insulation diameter AWG pin standard pin standard pin standard pin standard pin standard pin standard pin standard Separate contacts Cont. on a strip Order No Qty. Order No Qty
13 Crimp contacts Accessories pitch. Crimping tool see Accessories chapter Removal tool see Accessories chapter.13
14 pitch..1
Powermate Range pitch 7.00 Powermate Range pitch 7.00
Contents lug and socket connectors with leaf spring connection.2 lug and socket connectors with TO connection.6.1 lug and socket connectors with leaf spring connection STVS S Derating curve STVS SB Socket
More informationPCB plug-in connectors
Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating
More informationData sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
More informationOMNIMATE Power PCB terminals
Contents OMNIMTE ower OMNIMTE ower OMNIMTE ower Clamping yoke screw connection Explanation.2 Quick selection.4 roduct selection dimension 6.35.6 dimension 10.16.8 dimension 12.70.11 dimension 15.00.12.1
More informationDatasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
More informationDatasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
More informationUnimate Range Pitch 5.08
itch 5.08 in headers Socket connectors CB connection Solder connection SLA 90 250 V / 17.5 A SLA 180 250 V / 17.5 A.2.3 Cable connection Clamping yoke connection TO clamp connection BLA 250 V / 17,5 A
More information- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
More informationDirectory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
More informationSL-SMT Pitch 3.81 NEW. Data Sheet PCB Products. PCB Connectors SL-SMT 3.81/SL 3.81 BL 3.81
NEW SL-SMT itch 3.81 Data Sheet CB roducts CB Connectors SL-SMT 3.81/SL 3.81 BL 3.81 The 3.81 mm (0.51 inch) pitch connector system extends the selection of connectors available to the designer in the
More informationPrintview: Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning option - Item No.
Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1- pole; CAGE CLAMP ; commoning option Item No: 745-871/006-000 Stackable PCB terminal block; 16 mm²; Pin spacing 15 mm; 1-pole; CAGE CLAMP ; commoning
More informationNEW. Datasheet. WMF 2.5 Terminal Series
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
More informationFemale socket block, Screw connection, No. of poles: 12, Width: mm, Colour: Green
Female socket block, Screw connection, No. of poles: 12, Width: 45.72 mm, Colour: Green Business data Connector version Free connector Packaging unit 50 Quantity unit PC Packaging type Carton Type of banding
More informationDatasheet WMF 2.5 Terminal Series NEW. Phone: Fax: Web: -
Datasheet WMF 2.5 Terminal Series NEW The WMF 2.5 (multi-functional) terminal series is uniquely designed for DCS marshalling where increased functionality, improved spacing, higher wiring density and
More informationHan K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
More informationDouble-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / in
Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394 in Item No.: 736-704 Double-deck PCB terminal strip; 2 solder pins, in line; 4x2-pole; pin spacing 10 mm / 0.394
More informationDatasheet. W-series terminal with clamping yoke connection WSI 6
The fuse terminals of the Weidmüller W Series are available in two different forms: Fuse terminal with pivoting retaining lever Fuse terminal with plug-in SIHA fuse holder General ordering data Order No.
More informationContents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
More informationContents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
More informationUSA Canada On the Internet: Toll Free wieland Product Range Electrical Connections
0.2 F 01/02 270 Excerpt from our master catalogue wiecon PCB terminals In Ageneral, all Wieland components which are obliged to have the identification are provided with the A mark Pluggable PCB terminals
More informationCSF - CSM CONNECTORS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green
- CSM Functional characteristics Dimensional class: low 0 RoHS 2011/65/EU Standard colour: green Dimensions: 14 x 11.5 mm (.551 x.453 in) 10 20 30 mm ½ 1 in Max approved wire size: solid: 2.5 mm 2 (IMQ);
More informationData sheet... W-Series WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² WPE 4N). General ordering data Order No. 1010100000
More informationData sheet... W terminal earth terminal WPE 4
The PE terminals are available in two designs: standard and compact (N), with rated cross-section from 1.5 mm² to 150 mm² (e.g. 2.5 mm² WPE 2.5 or 4 mm² N). General ordering data Order No. 1010100000 Type
More informationMK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG AWG AWG Rated surge voltage / pollution severity
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
More informationV REG.-Nr. 6106, Z E SCHRACK. Accessories Industrial Power Relay RT. General Purpose Relays. pinnings 3.5mm / 5mm; relay height 15.
Accessories Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5mm / 5mm; relay height 15.7 mm n New retainer clip with ejection function n Easy replacement of relays on a densely packed
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CTF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.1 x 15.5 mm
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CCF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 25.4 x 14.9
More informationHan Q 1/0 Axial Screw Protected. Available February 2017
Features Compact connector based on size 3 A with a current carrying capacity of 100 A Space saving design due to an angled malemale version IP20 protected male and female contact according to IEC 60 529
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More information8WH6 ipo Installation Terminals
/2 Introduction /4 8WH through-type terminals /6 8WH through-type screw terminals /8 8WH N-conductor isolating terminals /10 8WH N-conductor isolating screw terminals /12 8WH installation terminals More
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CIF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 18.4 x 15.5
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationDBL distribution blocks 3x1 pole
TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"
More informationMulti-pole terminal strips
Contents for direct mounting Screw connection.2 Screw connection ATEX approval.6.1 for direct mounting Screw connection MK 2/12 2.5 MK 3/2...12 2.5 Width/Height/ø mounting hole Length / mounting dimensions
More informationData Sheet PCB Products
ata Sheet CB roducts LSF-SMT = CB terminal block for lead-free soldering processes with innovative connection technology: "ush In". b The "ush In" direct-connection terminal connector system ensures short
More informationGeneral Purpose Relays Accessories. Accessories Industrial Power Relay RT
Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5 mm / 5 mm; n New retainer clip with ejection function n Easy replacement of relays on a densely packed DIN rail n No reduction of
More informationHK-003,HC SERIES HK-003 HCSERIES. Modular Heavy-current connector WAIN 12-01
HK-00, SERIES HK-00 SERIES Modular Heavy-current connector 12-01 HK-00/0HK-00/2 Heavy-current inserts HE-006 HK-00 Technical characteristics Specifications Approvals Inserts Number of contacts Electrical
More informationDirectory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
More informationEPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
More informationD-Sub Connectors. Catalog E /09 Edition 3
www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com Table of Contents General..............................................................................................2
More informationData sheet. W-Series WDU 4 SL/EN
At Weidmüller, new solutions for the energy sector are developed according to local or application-based installation requirements. In some countries, control and protection of switching installations
More information06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More informationMK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG Rated surge voltage / pollution severity AWG 24..
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
More informationFeed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35
General ordering data Order No. 1608570000 Part designation 2.5/4AN Version EAN 4008190077136 Qty. 100 pc(s). Feed-through terminal,, Tension clamp connection, Wemid, Product notes Product description
More informationDatasheet. W-series terminal with clamping yoke connection WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationSystem pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489
System pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU 200 M is ABB s solution for UL 489 branch
More informationRoHS 2002/95/EC GREEN ELECTRONICS CVF. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS CONNECTORS
More informationZS4-SF1 Screw Clamp Terminal Block
Technical Datasheet 1SNK 161 011 D0201 ZS4-SF1 Screw Clamp Terminal Block Fuse Catalogue Page 1SNK 161 011 S0201 4 mm² 10 AWG 8 mm 0.315 in Spacing Features and Benefits 90 90 180 59.7 2.35" - Protect
More informationDOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD
DOUBLE-LEVEL TERMINAL BLOCKS SRKD SSLD PRODUCT INFORMATION Double-level terminal blocks SRKD SSLD CONTA-CLIP offers an innovative line of double-level feed-through terminals SRKD and protective-earth terminals
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSM. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSM Terminal Blocks Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Height: 15.2
More informationHan ES Press. Features. Description. Removal of conductor. Size 6 B - 24 B
Size 6 B - 24 B Features Easy bridging functionality of contacts by means of plug-in jumpers directly on the connector Fast realisation of potential multiplication as well as star and delta bridges Rapid
More informationRoHS 2002/95/EC GREEN ELECTRONICS CRM. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS CONNECTORS
More informationViking 3 - Screw connection Disconnect terminal blocks
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...
More informationPower distribution. RiLine fuse elements. NH fuse-switch disconnectors, size 000. For mounting plate assembly
NH fuse-switch disconnectors, size 000 Version -pole, cable outlet at the top/bottom For the use of fuse inserts to EN 60 - Technical specifications to IEC/EN 60 947-, see chapter -5, page 6 see chapter
More informationDIN rail enclosures. Combirail Alurail CombiNorm-Connect CombiNorm-Compact CombiNorm-Classic
DIN rail enclosures Combirail Alurail CombiNorm-Connect CombiNorm-Compact CombiNorm-Classic BOPLA: Innovative, capable and reliable For more than 40 years Bopla has been supporting customers in a wide
More informationHan-Power Energy Bus Components
HARTING Electric Han-Power Energy Bus Components People Power Partnership Han Data Sheet 0080-7 Han-Power T Han-Power T Part-Number Drawing Dimensions in mm 09 12 008 4701 Cable gland please order separately
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSP. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSP Terminal Blocks Functional characteristics Dimensional class: high RoHS 2011/65/EU Standard colour: green Height: 0 21.5
More informationDatasheet. W-series terminal with clamping yoke connection WDU 4
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationFuse switch-disconnectors
Fuse switch-disconnector FH00 is intended fuse-links with blade contacts size 000 and 00. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
More informationAccessories Miniature Relay PT (Continued)
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules
More informationFuse switch-disconnectors
Fuse switch-disconnector FH000 is intended for fuse-links with blade contacts size 000. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
More informationRoHS 2002/95/EC GREEN ELECTRONICS PSQ. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS PLURIMA
More informationrevos power New variety for industrial connectors
New variety for industrial connectors With the new revos power contact inserts, Wieland Electric extends its selection of the revos industrial connectors by another high performance industrial connector.
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationCIF CONNECTORS. Functional Characteristics. Brief Description. RoHS 2002/95/EC. Dimensional Class: Medium. Standard Colour: Green
SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET STD PRODUCTS CONNECTORS Functional Characteristics Dimensional Class: Medium Standard Colour: Green Dimensions: 18.4 x 15.5 mm (.724 x.610 in) Max Approved Wire
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationAF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
More informationAccessories (additional charge):
CombiNorm-Classic The 5-width enclosure programme for your 35 mm rail unit can be adapted to suit your own specific requirements by means of 4 different terminal types (= PCB variants) which, in some cases,
More informationOperating voltage from 10 KVDC to 15 kvdc. Operating current up to 13 A. 2-5 HV contacts. For cable sizes AWG 26-14
Operating voltage from 10 KVDC to 15 kvdc Operating current up to 1 A 2-5 HV contacts For cable sizes AWG 26-14 Overview Series MC P/N Description Plug Receptacle Cable mount Panel mount Coupling HV-pins
More informationLDG-S. Busable Enclosures for DIN-rails. Installation widths 22.5 mm and 45 mm
LDG-S Busable Enclosures for DIN-rails Installation widths 22. mm and 4 mm General The LDG-S serie of enclosures are fully insulated enclosures according to the specifications of the machinery and the
More informationRoHS 2002/95/EC GREEN ELECTRONICS CSF. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS CSF Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET STD PRODUCTS CONNECTORS
More informationRoHS 2011/65/EU GREEN ELECTRONICS MSG. Terminal Blocks ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2011/65/EU e3 GREEN ELECTRONICS Terminal Blocks ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS TERMINAL BLOCKS Functional characteristics s 270
More informationVarius SUMMARY OF MODELS
SUMMARY OF MODELS FH000 FH00 FH FH2 FH LTL4a Rated operating current I e 60 A 60 A 250 A 400 A 60 A 600 A Rated operating voltage AC/DC U e 690 V 690 V 690 V 690 V 690 V 690 V Size 000 00 2 4a Fuse-link
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationSystem pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489
Data Sheet System pro M compact for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU200 M is BB s solution for UL 489 branch circuit protection
More informationDATASHEET - DILMC9-10(24VDC) Technical data General. Contactor, 3p+1N/O, 4kW/400V/AC3. Catalog No Eaton Catalog No. XTCEC009B10TD.
DATASHEET - DILMC9-10(24VDC) Technical data General Contactor, 3p+1N/O, 4kW/400V/AC3 Part no. DILMC9-10(24VDC) Catalog No. 277468 Eaton Catalog No. XTCEC009B10TD EL-Nummer 4110305 (Norway) Standards IEC/EN
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationData sheet TERMSERIES TRZ 120VUC 1CO
relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: With screw and tension-clamp connection AgNi contact, optionally with hard gold-plated
More informationSCREW-TYPE DISTRIBUTION BLOCKS
SCREW-TYPE DISTRIBUTION BLOCKS PRODUCT INFORMATION CONTA-CONNECT Screw-distributor blocks SVB The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space
More informationComponent Specification
1.0 DESCRIPTION OF CONNECTOR AND INTENDED APPLICATION. The M80 series stamped female Trio-Tek open barrel crimp contact and rectangular Trio-Tek crimp housing form part of the Datamate J-Tek range of 2mm
More informationZS6-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK646D00 Catalogue Page ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
More informationZDP Pluggable Terminal Blocks Feed-through
Technical Datasheet 1SNK161D01 Catalogue Page 1SNK161S01 ZDP.- Pluggable Terminal Blocks Feed-through - Save in flexibility, reliability and simplicity thanks to the pluggable terminal blocks ZDP, - They
More informationZS6-4S Screw Clamp Terminal Blocks Feed-through with 4 connections
Technical Datasheet 1SNK166D01 Catalogue Page 1SNK166S01 ZS6-4S Screw Clamp Terminal Blocks Feed-through with 4 connections - High density wiring (one potential distribution on 4 independent screw clamps)
More informationFISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationZS10-S-R2 Screw Clamp Terminal Blocks Disconnect with lever
Technical Datasheet SNK6D0 Catalogue Page ZS-S-R2 Screw Clamp Terminal Blocks Disconnect with lever Simplify the disconnect operations for the disconnect terminal blocks installed next to fuse terminal
More informationZS4-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK6D00 Catalogue Page SNK6S00 ZS4-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
More informationVB6, VB7 3-pole mini reversing contactors with screw terminals 4 to 5.5 kw AC operated
VB6, VB7 -pole mini reversing contactors with screw terminals 4 to 5.5 kw AC operated VB7-0-10 2CDC211006F0011 Description VB6, VB7 -pole compact design reversing contactors are space optimized control
More informationZS4-SF1-R Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator
Technical Datasheet SNK63D00 Catalogue Page SNK63S00 ZS-SF-R Screw Clamp Terminal Blocks For x 0 and x fuses - with blown fuse indicator - Protect your circuit with x and x0 fuse terminal blocks (fuse
More informationB6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data
B6, B7, BC6, BC7, TBC7 - and 4-pole mini contactors VB6, VB7, VBC6, VBC7 - and 4-pole mini reversing contactors Main pole Utilization characteristics according to IEC Standards IEC/EN 60947-1, IEC/EN 60947-4-1
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationEPIC CIRCON M23 Series
CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland provides strain relief,
More informationSMD TERMINAL BLOCKS. Small is Big!
SMD TERMINAL BLOCKS Small is Big! SMD TERMINAL BLOCKS A compact and low-profile PCB connection is required to achieve the most uniform light distribution, while minimizing shadowing. WAGO s surface-mount
More informationMS25, MST25, MS20, MST20
Versions: - MS25 with thermal and magnetic releases - MST25 with a thermal release - MS20 - with thermal and magnetic releases for single-phase consumers - MST20 with a thermal for single phase consumers
More informationDatasheet. Approvals. Technical data. Feed-through terminal WK 4 / U BLUE /V0. General. Technical data. Connection Data
Datasheet Art.No. 57.504.0055.6 Feed-through terminal WK 4 / U BLUE /V0 Feed-through DIN rail terminal block with screw connection for mounting on TS 35 and TS 32, nominal cross section 4 mm², width 6
More information55 Series - Miniature General Purpose Relays 5-10 A
Series - Miniature General Purpose Relays -0 A - Plug-in or P.C.B. versions - AC or DC coils - Lockable test button and mechanical flag indicator as standard on and CO relays types - Sockets and accessories:
More informationTerminal Blocks Product Catalog Terminal Block Supplement. Introduction. 8WH6 ipo Plug-In Terminals. 8WH6 ipo Installation Terminals
Terminal Blocks 2013 Product Catalog Terminal Block Supplement Introduction 8WH6 ipo Plug-In Terminals 8WH6 ipo Installation Terminals 8WH2 Spring-Loaded Terminals 1 2 3 4 8WH 8WH5 Combination Plug-In
More informationZS6-3S Screw Clamp Terminal Blocks Feed-through with 3 connections
Technical Datasheet SNK663D00 Catalogue Page SNK667S00 ZS6-3S Screw Clamp Terminal Blocks Feed-through with 3 connections - Recommended for energy markets and highly demanding applications requiring that
More informationAccessories Miniature Relay PT
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail Socket with logical arrangement of control/load terminals High quality rising clamp terminals Captive combination
More information