Note: Upholstry is required.

Transcription

1 Sheetmetal

2 The Lucky Sucker TC Softail Conversion Are you ready to turn your run of the mill, everyday Softail into something cool that will turn heads and grab attention? With the Lucky Sucker conversion, the transformation from stock to custom can be done easily and quickly. The Lucky Sucker consists of a custom gas tank, tank adapter, a solo seat kit, swingarm mounted 'rigid-style' rear fender and fender struts. These parts are as 'bolton' as you can get and will transform your bike as drastically. Each part was designed to work together or can be used as stand-alone components, giving you the creative lead while building your custom vision without breaking the bank. Custom Gas Tank The Lucky Sucker tank is designed for easy bolt-on installation when used with the tank adapter CCI # (sold separately) on any 00-Up EFI or carbureted Twin Cam Softails or custom applications (EFI models requires the use of a Harley Davidson OEM fuel pump # D). An Indian Larry dished style tank and Cole Foster bobber tank are also available for use with the Lucky Sucker tank adapter Lucky Sucker Gas Tank for Carbureted models $ Lucky Sucker Gas Tank for EFI Models $ Indian Larry Style Dished Tank 3.5 Gal for EFI models $ Indian Larry Style Dished Tank 4.5 Gal for EFI models $ Indian Larry Style Dished Tank 3.5 Gal for Carbureted models $ Indian Larry Style Dished Tank 4.5 Gal for Carbureted models $ Cole Foster Bobber Tank for EFI models $ Lucky Sucker replacement gas cap $19.99 Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust. Softail Tank Adapter This part makes installing a custom gas tank onto your 00-Up Twin Cam Softail as easy as removing the stock tank and bolting this adapter on. The adapter bolts-on to the stock mounting points and has a mount built into it for the OEM ignition switch. You can bolt the Lucky Sucker tank directly onto it or you can fabricate your own with the builders kit that will allow you place the tank mounts and ignition switch where-ever you like Lucky Sucker Gas Tank Adapter $ Lucky Sucker tank adapter builders kit $69.99 Rigid-Style Rear Fender & Struts The perfect way to give your Softail that Old School rigid look. Designed to fit Softail models from 00-Up and custom applications. Installation of the fender will require the separate purchase of a set of chrome or raw fender struts or you can custom build your own Lucky Sucker 9 wide rigid-style fender (200 mm rear tires) $ Lucky Sucker 7.25 wide rigid-style fender (150 mm rear tires) $ Lucky Sucker rigid-style fender struts, chrome (pr) $ Lucky Sucker rigid-style fender struts, raw (pr) $34.99 Note: Minor frame modification is required. The Lucky Sucker Softail Solo Seat Kit The perfect accessory to the rigid fender kit since your stock seat will no longer fit. This seat completes the transformation of your Softail to a pure rigid-look. The seat is solid mounted to keep you as low to the ground as possible. Seat kit comes complete with a raw steel seat pan and all necessary mounting brackets and hardware. Designed to fit FX Softail models (except Deuce) from and FL Softail models from 00-Up Lucky Sucker Solo Seat kit $ Note: Upholstry is required..02 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

3 APPAREL Before SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

4 Steeler Front Fenders Super-smooth radiused bends without steps and a low-profile are the mark of the these fenders. Each heavy-duty fender is 18 gauge steel and non-drilled to permit maximum custom positioning /4"-wide for custom applications $ "-wide for FL and FXST models $99.99 Note: Always be sure to check for fitment and clearance before painting Doss Dixie Fenders Master bike builder Rick Doss comes back with yet another hot style for your custom machine. Fenders are made from 18 gauge cold rolled steel and are ready for fit and paint. All you need is your imagination! Front Fenders /4"-wide $ "-wide $ Rear Fenders /4"-wide $ "-wide $9.99 Note: Always be sure to check for fitment and clearance before painting. Roller Forty Tombstone Custom Front Fenders Custom steel fenders for use with 21x3.5 front wheels. Fenders come non-drilled for custom applications. Mounts are 9 wide Outlaw 21x5.50 front fender - 40 Length $ Gunfire 21x5.50 front fender Length $ Note: Always be sure to check for fitment and clearance before painting. Custom Steel Front Fenders Construction starts with two pieces of heavy-gauge steel which are formed and welded into shape. Finally, the fender is sanded and finished out, making it primer ready. Used by many of the top bike builders for their unmistakable style and superior quality. Designed for custom applications. Be sure to check installation and fit before painting. 4 3/4"-Wide Fenders Forty $ Roller $ Tombstone $ "-Wide Fenders Tombstone $ Roller $99.99 Note: Always be sure to check for fitment and clearance before painting..04 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

5 APPAREL SEATS & BAGS FOOT 6057 HAND LIGHTING ELECTRICAL EXHAUST Touring Front Fenders These front fenders are a direct replacement front fender for Street Glide & Road Glide models and will fit any Touring models when you want to eliminate the fender lights and trim. Comes in two styles Smooth or Ribbed. The ribbed fenders have a three rib pattern with the middle one longer than the outer two. They are a stamped steel construction and measure 6-1/2 wide and come pre-drilled. Fits all Touring models. Front Fenders for 16 and 18 Wheels Smooth front fender $ Ribbed front fender $ Front Fender for 21 Wheels: 6057 Smooth front fender $ Front Fender with Ribs in Rear $ Note: Always be sure to check for fitment and clearance before painting. INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

6 Custom Fenders for Touring Models with 21x3.5 Wheels These versions of our popular front fenders come with some added width and extended mounting tabs to accommodate taller 21 wheels on Touring models. Fitment must be checked before paint, recommended for 120/70-21 tires Steeler 6 fender $ Forty 6 fender $ Roller 6 fender $ Tombstone 6 fender $1.99 Note: Always be sure to check for fitment and clearance before painting Ness Big-Wheeler Front Fender Great styling for the front of your Touring model A must when using a 21 x 3.50 on Touring models A direct replacement fender for all Touring models This fender will drastically improve the looks of the front end of your bike Big-Wheeler Front Fender, Made of Fiberglass $ Note: Always be sure to check for fitment and clearance before painting. Arlen Ness Wrapper Front Fenders for Touring Models These fenders wrap perfectly around that 23 or 26 custom wheel on your Bagger. They are a direct bolt-on for 87- Touring models and no fender spacers are required. Available in a Carbon Composite or Fiberglass construction. For all -Up Touring models inch Wrapper front fender, Carbon composite $ inch Wrapper front fender, Carbon composite $ For all Touring models inch Wrapper front fender, Composite $ inch Wrapper front fender, Fiberglass $ Note: Always be sure to check for fitment and clearance before painting..06 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

7 APPAREL SEATS & BAGS FOOT HAND Quickbob Front Fender This fender compliments our ever popular Quickbob and Fatbob rear fender kits. It fits 1980 and later FXST, FXSTC and FXWG models Quickbob front fender $ Note: Always be sure to check for fitment and clearance before painting. Front Fenders for 4-Speed Models Our replacement steel fenders fit all 4-speed FL models from 81-84, and have all of the correct holes and dimples for fender trim and tip lights style (replaces OEM ) $99.99 Note: Always be sure to check for fitment and clearance before painting. LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE Steel Front Fender for Fat Boy Models Get the great Fat Boy look on your Heritage Softail model, or replace damaged fenders on Fat Boy models from Replaces OEM Steel Front Fender $81.99 Note: Always be sure to check for fitment and clearance before painting. Front Fenders for Heritage Softail Models Replacement fender without holes and dimples for custom applications, i.e. early style fender tips. Heavy-duty braces are riveted to fender shell. Fits Heritage Softail models from 86-13, as well as all Fat Boy models when a full fender is desired Smooth-style fender $ Exact duplicate of Original Equipment fender with all holes and dimples for stock lighted fender tips as well as upper and lower trim. Heavy-duty braces are riveted to fender shell. Fits Heritage Softail models from 86-13, as well as all Fat Boy models when a full fender is desired Stock replacement fender (repl. OEM ) $99.99 Note: Always be sure to check for fitment and clearance before painting. GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Ness Cafe Front Fender This sleek front Cafe fender is made out of durable A.B.S. plastic ready for primer and paint. The mounting holes are undrilled to permit use on Narrow Glide front forks with 19" or 21" wheels Ness Cafe Front Fender $69.99 Note: Always be sure to check for fitment and clearance before painting. Front Fender for Early Touring Models A precisely-crafted reproduction of the speed Dresser front fender with properly rolled edges and structural reinforcement. Will also fit Touring models from Early Touring Fender $ Note: Always be sure to check for fitment and clearance before painting. INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

8 266 Custom Fender for Wide Glide Front Ends A bolt-on version that completely replaces the stock front fender on Dyna Wide Glide, Softail and 4-speed FXWG models from (except Heritage Softail, Fat Boy and Springer Softail models). Styled with an added accent bead around its entire edge. These fenders include polished aluminum spacer blocks, and fit with 19" or 21" wheels only. May require drilling. 6 wide Custom fender $ Note: Always be sure to check for fitment and clearance before painting Fenders for Narrow Glide Models Original-style front fenders for FX, FXR, Sportster and Dyna Glide models from Unpainted and include chrome brackets and the rivets necessary to install them Fender (repl. OEMs TB, ) $59.99 Note: Always be sure to check for fitment and clearance before painting. Front Fenders for Wide Glide and Softail Models A trim, tire-hugging fender with chrome brackets, ready-to-paint. A reproduction of the Original Equipment front fender on FXST, FXSTC and 4-speed FXWG models from and Dyna Wide Glide models Replaces OEM Fender with chrome mounting bracket $ Fender with raw steel mounting bracket $39.99 Wide Glide Front Fender for 35mm Forks Custom front fender for the 35mm front forks on FX, FXR and Sportster models from 73-E87. Unpainted, and complete with integral chrome-plated brackets. For use with 18", 19" or 21" wheels. Replaces OEM Fender with Chrome Brackets $45.99 Note: Always be sure to check for fitment and clearance before painting. Custom Skirted Fender with Flip Based loosely on the skirted early K model front fender, this timeless classic has been updated to fit all 35mm and 39mm front forks from Unpainted (5 3/4 wide) Custom skirted fender $ Note: Fender should not be used on bikes equipped with highway bars. Always be sure to check for fitment and clearance before painting. Springer Front Fender for Big Twins Accurate, faithful reproduction of the original fender. Complete with braces and fender edge reveal. Fits all Big Twins from Replaces OEM (measures 7 1/2 wide) Springer front fender $ Note: Always be sure to check for fitment and clearance before painting. Narrow Front Fenders These replacement narrow front fenders fit FX, FXR, Sportster and Dyna Glide models from with 35mm or 39mm front forks. Available chrome or unpainted with chrome brackets. For use with narrow 18", 19" and 21" rims. Replaces OEM Chrome fender and bracket..... $ Raw fender and bracket......$31.99 Note: Always be sure to check for fitment and clearance before painting..08 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Narrow Front Fender for FL Models Custom, unpainted steel narrow FXWGstyle front fender for all 4-speed FL model forks from Includes chrome mounting brackets, the fender profile is designed to clear 18", 19" and 21" tires Narrow Front Fender $54.99 Note: Always be sure to check for fitment and clearance before painting. Please see Cautionary Information in back of catalog.

9 APPAREL SEATS & BAGS Khrome Werks Lower Front Fender Trim Pieces These American-made lower fender trims follow the contour of the Original Equipment front fenders. Designed to replace the stock parts on many models from Each trim comes complete with all required mounting hardware Fits FLT, FLHT, FLHS and Road King models from (repl. OEM ) shown $ Fits all Heritage Softail models from late (repl. OEM ) $31.99 Chrome Lower Fender Trim A reproduction of the lower trim installed on FL models from 68-75, but completely chrome-plated without the black accents. Fits all FL, FLT, FLHT and FLHS models from Comes complete with chrome mounting hardware Replaces OEM $20.99 Hooded Skull Fender Ornament Chrome with a satin black hood Universal mount will fit most front fenders Includes a rubber mounting gasket and hardware (requires drilling fender for installation) Hooded skull fender ornament, sold each $27.99 FOOT HAND LIGHTING ELECTRICAL EXHAUST Vintage V Style Fender Tips and Trim Reproductions of the chrome front and rear fender tips and stainless steel trim pieces. The fender tips are die-cast in the V design used as Original Equipment from The front fender side trim and front fender lower edge trim are formed in stainless steel. Each part includes hardware, and fits all FL front fenders from and all FL rear fenders from Front fender trim set (includes CC # s and 26595) $ Front fender tip V design (indexed for side spears) as used from (repl. OEM ) $ Front fender side spear set as used from (repl. OEMs and ) $ Rear fender tip V design as used from (repl. OEM ) $18.99 Skull Head Fender Trim Quality die-cast trim piece is contoured to match the front fender on FL, FLT, FLHT models and many custom applications. Features a highly detailed skull head logo with gold trim and 12 volt illuminated eyes Chrome with gold trim and illuminated eyes $ Eagle Head Fender Ornament This die-cast fender ornament is highly detailed and come with illuminated eyes. The illuminated version is internally lit with 2 independent 12V light bulbs which can be connected to the turn signals or running lights. Fits FL, FLT and FLHT models and many custom applications Illuminated eyes with gold accented beak $ Replacement bulb, 12V 2W (box of 10) $0.60 INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES Chrome Front Fender Trim Bumper Chrome front fender trim bumper for FLT 93-Up models (except 98-Up FLTR and Trike models), replaces OEM C Fender trim bumper fits FLT 93-Up $52.99 Indian Head Fender Lamp For a vintage look on your bike just add our fender lamp that features a molded Indian Head face in the white plastic lamp lens. Perfectly fits the curvature of most full front fenders used with 16" front wheels Chrome housing $ Replacement white lens $ GENERAL CROSS REFERENCE

10 Custom Rear Fenders for Touring Models These custom skirted rear fenders features built in saddlebag filler panels which cover the fender struts and the gap between the fender and saddlebags. Available with an optional recessed & curved license plate and a chrome LED 3 function taillight (Turn Signals, Running & Brake Lights) and in a smooth or ribbed design. They come pre-drilled and mount to the stock fender location. Fits all 09-Up Touring models. Note: Some models will require a custom taillights, turn signals and or running light. Will work with accessory 2 & 4 point docking systems. Always be sure to check for fitment and clearance before painting Ribbed fender with curved LED license plate assembly $ Smooth fender with curved LED license plate assembly $ Ribbed fender without curved license plate recess $ Smooth fenders without curved license plate recess $ Roller Tombstone Steeler Custom Rear Fenders Wide to super-wide steel rear fenders are designed for custom applications. Be sure to check installation and fit before painting. Steeler /4"-wide $ /2"-wide $ "-wide $ Tombstone /4"-wide $ /2"-wide $ "-wide $ Roller /4"-wide $ /2"-wide $ "-wide $ Note: Always be sure to check for fitment and clearance before painting. Desperado Rear Fender You may have noticed it s simplicity yet distinctive design. This rear fender is truly one of a kind. Measures 9"-wide with 400mm-radius Especially made for 16" and 18" wheels For up to 200 series tires Made of raw, heavy 18-gauge steel Desperado fender $9.99 Note: Always be sure to check for fitment and clearance before painting..10 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

11 78345 APPAREL SEATS & BAGS FOOT HAND Replacement Rear Fenders for Softail Models Accurate reproductions of their Original Equipment counterparts. They re pre-drilled for the fender struts and license plate mount, and have the taillight mount in place. They fit all Softail models from Available with or without provisions for the turn signal bar Without mounting holes for turn signal bar (repl. OEM ) $ With mounting holes for turn signal bar (repl. OEM ) $ Vintage rear fender without taillight and turn signal mounts $89.99 Note: Always be sure to check for fitment and clearance before painting LIGHTING ELECTRICAL EXHAUST INTAKE Doss Dixie Fenders Master bike builder Rick Doss comes back with yet another hot style for your custom machine. Fenders are made from 18 gauge cold rolled steel and are ready for fit and paint. All you need is your imagination! Front Fenders /4"-wide $ "-wide $ Rear Fenders /4"-wide $ "-wide $9.99 Note: Always be sure to check for fitment and clearance before painting. Roll-Your-Own Custom Blank Steel Fenders Fabricate your own custom fenders with these blank steel fenders. Made just for the custom bike builder or experienced metalworker. Permit you to cut, style and create your own front and/or rear fenders. Raw steel finish in smooth-side and round-top versions. Compatible with wheels from 16" up to 21". Fenders width is measured from inside edge to inside edge. Smooth-Side Front Fenders with 13 3/8" Radius Measures 6"-wide, accepts 16" wheels $99.99 Smooth-Side Rear Fenders with 13 3/8" Radius Measures 7 1/4"-wide, accepts 16" wheels $ Measures 8 1/2"-wide, accepts 16" wheels $ Measures 9"-wide, accepts 16" wheels $ Measures 10 1/2"-wide, accepts 16" wheels $ Measures 11"-wide, accepts 16" wheels $ Smooth-Side Rear Fenders with 15 3/4" Radius Measures 7 1/4"-wide, accepts 16" wheels $ Measures 8 1/2"-wide, accepts 16" wheels $ Measures 9"-wide, accepts 16" wheels $ Measures 10 1/2"-wide, accepts 16" wheels $ Measures 11"-wide, accepts 16" wheels $ Note: Round-Top fenders are flat along the weld. Round-Top Rear Fenders with 13 3/8" Radius Measures 4 3/4"-wide, accepts 19" to 21" wheels..... $ Measures 6"-wide, accepts 16" to 18 " wheels $99.99 Smooth-Side Front Fenders with 15 3/4" Radius Measures 7 1/4"-wide, accepts 16" to 18" wheels..... $ Measures 8 1/2"-wide, accepts 16" to 18" wheels.... $ Measures 9"-wide, accepts 16" to 18" wheels $ Measures 10 1/2"-wide, accepts 16" to 18" wheels... $ Measures 11"-wide, accepts 16" to 18" wheels $ Note: Always be sure to check for fitment and clearance before painting. ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

12 Rigid-Style Rear Fender & Struts The perfect way to give your Softail that Old School rigid look. Designed to fit Softail models from and custom applications. Installation of the fender will require the separate purchase of a set of chrome or raw fender struts or you can custom build your own Lucky Sucker 7.25 wide rigid-style fender (150 mm rear tires) $ Lucky Sucker 9 wide rigid-style fender (200 mm rear tires) $ Lucky Sucker rigid-style fender struts, chrome (pr) $ Lucky Sucker rigid-style fender struts, raw (pr) $34.99 Note: Always be sure to check for fitment and clearance before painting. Some frame modification required. Chopped and Stock Rear Fenders for Late Sportsters As seen on our Café Sporty! Turn your XL into a café racer, chopper or whatever you see fit Chopped rear fender for XL 04-Up $ Stock rear fender for XL 04-Up $ Note: Always be sure to check for fitment and clearance before painting. Some models may require some modifications Shorty Rear Fender for 07- Softails This fender bolts right onto 07- Softails with a stock 200mm rear tire. We chose to leave the end like the bobbed look of a hinged fender with the back portion taken off but you are welcome to take a grinder to it and give it your personal touch! Shorty Softail fender $ Note: Always be sure to check for fitment and clearance before painting. Sport Bob Rear Fender Kits for Sportster Models These exclusive fender kits include a new ABS plastic fender extension for the front of the fender, a Cateye taillight assembly with mounting bracket and the extra pop rivets necessary to reinstall your circuit breaker clips Fits Sportster models from $ Fits Sportster models from $ Note: Always be sure to check for fitment and clearance before painting..12 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

13 APPAREL Quickbob Rear Fender for FX Models Custom rear fender for an easy, affordable conversion to the Fat Bob look. Fits stock 4-speed FX frames and uses the stock width fender struts. Cannot be used as a replacement fender for FXWGs. Heavy-gauge metal for lasting service Fits FX models from (except FXWG, FXST) $89.99 Note: Always be sure to check for fitment and clearance before painting. SEATS & BAGS FOOT HAND Custom Fat Bob Rear Fenders Original style universal and custom application fenders. Available with left or right-hand chain cutaway without taillight mount. Fenders measure approx. 38"-long, 7"-wide and 5 1/2"- deep. Fenders are unpainted. Left Chain Cutaway Fits all Big Twin models and bikes with the chain on the left side Without taillight mount $75.99 Right Chain Cutaway Fits Sportster models in custom frames and bikes with the chain on the right side Without taillight mount $75.99 Note: Always be sure to check for fitment and clearance before painting. Custom Rear Fender for Softail Models A duplicate of the fenders fitted to Heritage Softail models, but is smooth with only fender strut holes in it for custom taillights. It s ready to use as a replacement item or for FX Softail models converting to full fenders Fits all Softail models from as a custom fender.. $ Note: 97 and newer models require modification and/or relocation of OEM fuse box. Always be sure to check for fitment and clearance before painting. LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS Fat Bob Fender and Taillight Kit for FXR Models Custom Fat Bob styling. 3-piece kit includes Fat Bob fender, Fat Bob taillight and deluxe taillight bracket. Features flush-mount taillight positioning. Bolts easily to all stock fender struts. Compatible with Original Equipment sissy bar kits Fits all FXR models from $ Note: Always be sure to check for fitment and clearance before painting. Rear Fender Extension for Softail Models Improves the overall appearance of this area on the bike. It is made in the USA from black, paintable high-impact A.B.S. plastic, and when painted to match the fender and properly installed, this fender extension gives the appearance of the fuller and rounder long fenders used on rigid framed Big Twins Fits all 5-speed Softail models from $49.99 Note: It will be necessary to drill mounting holes and circuit breaker clip holes for installation. Always be sure to check for fitment and clearance before painting. TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Rear Fender for FXR Models Stock replacement rear fender for FXR models from (except FXRT models). Unpainted steel Replaces OEM A $74.99 Note: Always be sure to check for fitment and clearance before painting. Custom Rear Fenders for Softail Models Early-style reveal stamped in the rear tips. Installation requires the removal of 5" from the struts. Two decorative end caps are supplied to finish off the shortened struts. Fit all 5-speed Softail models from With no taillight mount $ Note: models require modification and/or relocation of OEM fuse box. The stock turn signals must be relocated, and the saddlebags on FLSTC models cannot be reinstalled due to the shortened fender struts. Always be sure to check for fitment and clearance before painting. INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

14 Hinged Rear Fenders for FL Swingarms These two-piece hinged fenders fit all 4-speed Big Twin FL frames from They also fit FX models if FL struts are used and can be adapted to FXWGs. A slight dent must be made in the front right lower corner of the fender to clear the FXE battery box. Unpainted steel With no taillight mount (repl. OEM A) $ Note: Always be sure to check for fitment and clearance before painting One-Piece Rear Fenders for FL Models Accurate reproductions of the one-piece rear fenders on 4-speed FL models from One version is smooth with no taillight or turn signal mounts, and the other has the taillight mount (but no turn signal mounts). Fender strut mounting holes are already drilled With no taillight or turn signal mounts $ With taillight mount but no indentations for the turn signal mounting bar $ Note: Always be sure to check for fitment and clearance before painting Rear Fenders for FX Models Detailed reproductions of the Original Equipment 4-speed FX rear fenders from Available with or without mounting bracket for taillight assembly Original style with light mount $ Original style without mount $ Custom bobbed, overall length $76.99 Note: Taillight, visor and license mounting bracket are not included and are shown for illustration purposes only. Always be sure to check for fitment and clearance before painting. Rigid Rear Fender for Big Twin Models An accurate reproduction of the rigid mounted rear fenders used on models. Fenders come unpainted and with brackets ready to bolt-on Fits Big Twin models repl. OEM $ Fits models $ Fits Big Twin models repl. OEM $9.99 Note: Always be sure to check fitment and clearance before painting.. *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

15 APPAREL SEATS & BAGS FOOT Wide Fenders for Rigid Frames Custom flat fenders made of heavy-duty -gauge steel in wide widths /2"-wide $ /2"-wide $ "-wide $38.99 Note: Always be sure to check fitment and clearance before painting HAND LIGHTING ELECTRICAL EXHAUST Universal Steel Rear Fenders Available in 5" or 6" widths. Great for trailers too " wide $ " wide $42.99 Note: Always be sure to check fitment and clearance before painting. OneTonHo and TwoTonHo Custom Rear Fenders Designed specifically for wide rigid frames. Fenders feature internal wiring loom and a belt cutout. The TwoTonHo has built-in fender supports pre-drilled for turn signals while the OneTonHo has no supports /2"-wide OneTonHo $ /2"-wide OneTonHo $ "-wide TwoTonHo $ "-wide OneTonHo $ For Santee 200-Series Rigid Frames "-wide custom OneTonHo $9.99 Note: Always be sure to check fitment and clearance before painting. INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE Two Eight WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Ultra-Wide Custom Fenders Made of 18-gauge steel, these 10 1/2"-wide fenders fit Avon series tires. Undrilled for custom applications wide Two Eight $9.99 Note: Always be sure to check fitment and clearance before painting. Custom Rear Fenders for Santee Rigid Frames Plain steel straps support the rear fender on your wide-tired Santee-framed chopper. For Santee 180-Series Rigid Frames /2"-wide rear fender with plain steel strap supports $ /2"-wide without support $9.99 For Santee 200-Series Rigid Frames "-wide without support $9.99 Note: Always be sure to check fitment and clearance before painting. INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

16 Universal Fender Strut Kit by TC Bros Universal fender strut kit for choppers and bobbers. Kit includes: 4 CNC machined steel bungs with 3/8-16 threaded hole and two 12 long 1/2 diameter steel rods. Everything is made from 1018 mild steel for easy welding! Fender strut kit $29.99 Threaded Bungs by TC Bros These bungs can be used to mount fenders, tanks, and virtually anything that you want to bolt to your frame. CNC machined from from 3/4 OD 1018 cold rolled steel. 5/16-18 threaded hole, 1.75 overall length. Includes bolts and rubber washers to protect your paint. Sold in quantities of Threaded bungs $19.99 K&N Reinforced Rubber Fender Washers 1"-diameter round rubber washers have dozens of uses, in addition to the obvious. Allows clean scratch-free, well-cushioned installations. Card of 12 packs of Fender washers, price per pack of $6.58 Universal Mounting Bracket/Gusset by Vulcan Engineering Milled from 1018 CF Steel, Not stamped! 3/16 Thick with a 3/8 hole. Perfect for mounting custom exhaust or as a brake anchor mount or any other applications you can come up with. Made in the USA. Sold each Universal bracket/gusset (3/16 thick w/ a 3/8 hole)......$ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

17 APPAREL SEATS & BAGS FOOT Chrome Fender Strut Sets Chrome rear fender struts for 4-speed Big Twin, Sportster and K models from All sets are formed from high-grade steel and pre-drilled with the correct mounting holes before polishing and plating. Can be used to mount custom, reproduction or Original Equipment fenders Fit FX models from holes (not countersunk)....$ Fit FL models from $ Fit FL models from (turn signal holes have been removed) $ Fit FXWG from (turn signal holes have been removed) $ Fit Sportster and K models from (turn signal holes have been removed) $79.99 Note: Hardware is not included. Chrome Fender Struts for Sportster Models Chrome-plated die-cast aluminum replacements for the Original Equipment parts. Fit 4-speed Sportster models from (replaces OEMs and ). Sold in sets Fits XL models $84.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE Chrome Fender Struts for Softail Models These stock replacement struts fit all FL Softail models from Replaces OEMs and Sold in sets Softail Fender Struts $85.99 ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS Billet Machine Gun Fender Struts by Vulcan Engineering Here is a cool set of fender struts to help you mount that rear fender on your latest project. They are CNC-Machined from billet aluminum and then chrome-plated. Fender struts measure 10 5/8 from mounting holes center to center. Sold as a pair Machine Gun Rigid Fender Struts $ Skull Strut Covers Polished cast aluminum fender strut cover set has handcarved and molded 3D skulls that put a whole new accent on your bike! Fits all Softail models (except Deuce models) from Sold in pairs Skull Strut Covers $ Note: Covers may interfere with saddlebags on some models. SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

18 Big Bags by Arlen Ness Newly redesigned version of their highly popular Big Bags. Makes full use of the saddlebag interior unlike the extension kits which do not add additional interior space. Big Bags accept OEM lids and mounting hardware. Constructed from hi-strength fiberglass. Smooth finish inside and out. We recommend using the Bagger-Tail fender kit (CCI #648026) when installing Arlen s Big Bags. Sold in pairs with no lids or hardware Fits all FLT models $1, Note: Please check fit and finish prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs.rear Fender Kits for Touring Models FLH/FLT Rear Fender Kits New Bagger-Tail fenders from Arlen Ness are a direct replacement for the OEM fender on Touring models. Pre-drilled bolt-on fenders give your bike a clean unique look while filling in the gap between the fender and saddlebags. Fenders can be used with either a stock width rear tire or up to a 200mm rear tire. Supplied with a Ness/RWD license/taillight assembly with turn signals that plug into the factory harness. We recommend using the Bagger-Tail fender kit with either the Ness saddlebag extension (CC part #05800) or with Arlen s Big Bags and using the Duck-Tail fender kit with stock saddlebags. Note: Please check fit and finish prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs Bagger-Tail fender kit, $ Bagger-Tail FLT fender kit, 09- FLT $ Note: Please check fit and finish prior to painting bags. Arlen Ness will not be responsible for any damage sustained to paint jobs..18 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

19 APPAREL SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL EXHAUST ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST. Silhouette INTAKE ENGINE Bare Bones Solo Sorrento Villian GASKETS TRANSMISSION & CLUTCH PYO/Bagger Nation Custom Stretched Gas Tank for Touring Models Paul has created what he feels is the finest stretched tank design available. Flowing and elegant lines that perfectly compliment the stance of your Bagger. This tank is a 6 gallon one-piece stretched unit and if the tank wasn t enough Paul also designed a custom steel dash with a cool pop-up gas cap for this tank. Tank kits include a 6 gal. tank, custom low-profile steel dash, rubber trim and any necessary mounting brackets. Available for 03-Up FLHT/FLTR models. ( Stock seat may need to be modified or custom seat has to be made ) PYO/Bagger Nation stretched gas tank for 08- FLHT/FLTR models $ PYO/Bagger Nation stretched gas tank for FLHT/FLTR models $ Replacement Parts PYO/Bagger Nation replacement stretched dash for 08- FLHT/FLTR models $ PYO/Bagger Nation replacement stretched dash for FLHT/FLTR models $ Replacement pop-up gas cap $ Replacement rubber gasket for $ Replacement hardware kit for $ Replacement hardware kit (excluding filler neck) for $ Replacement filler neck for $39.99 Optional Le Pera Seats These seats were designed by Le Pera to be used exclusively with the PYO/Bagger Nation Stretched Gas Tanks For 08- FLHT/FLTR models Silhouette seat for use with CCI part # on all 08-Up FLHT/FLTR models $ Bare Bones Solo seat for use with CCI part # on all 08-Up FLHT/FLTR models $ Sorrento 2-up seat for use with CCI part # on all 08-Up FLHT/FLTR models $ Villain seat for use with CCI part # on all 08-Up FLHT/FLTR models $ For FLHT/FLTR models Silhouette seat for use with CCI part # on all FLHT/FLTR models $ Bare Bones Solo seat for use with CCI part # on all FLHT/FLTR models $ DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

20 Gallon Stretched Tank for Touring Models These new custom 7 gal stretched tanks bolt to the frame via stock mountings, the one piece steel construction has a curved bottom design to add that great custom look. They measure approximately 18 wide x 25 long and require a custom seat to be fitted. EFI version tanks come with a custom dash with hidden filler opening & accepts the stock OEM fuel-pumps. Carbureted version (not shown) comes with a center screw in type bung, gas cap sold separately. Hardware & rear mounting brackets included Stretched 7 gallon tank, no dash, screw bung fits carbureted Touring models $ Stretched 7 gallon tank, raw dash fits EFI Touring models $ Stretched 7 gallon tank, raw dash fits EFI Touring models $ Chrome dash for EFI Touring tank $ Custom One-Piece Stretched Tanks for Twin Cam Softail Models These tanks are stretched 2" and have all the tabs to mount your stock dash. They accept late model screw-in gas caps and also have provisions for the stock fuel gauge. They re available for both fuel injected and carbureted models Fits carbureted Softail models from 00-03, 5 gallons.... $ Fits fuel injected Softail models (except Deuce models, carbureted models) $ Note: All fuel tanks should be test fitted and pressure tested before painting. Installation of this tank may require a custom seat due to their longer lengths. ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST..20 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

21 Caps and Dash not included APPAREL SEATS & BAGS FOOT HAND Screw-In Stretched Flatside Fat Bob Tanks for Softail Models Stretched tanks are one of the hottest custom bike trends. We start with our best selling 5 gallon tanks and weld on custom formed steel extensions. The extensions add over two inches to the length of the tank and create a smooth flowing look by filling the void between the seat and where the tank normally ends. Manufactured of heavy gauge steel on new tooling, each tank is hand inspected and pressure tested to ensure quality and a perfect fit. Designed for use with a stock dash, tank panel, late model (13/16" thread) petcock and most standard width seats. Available with bungs for screw-in gas caps. Fit Softail models from and most frames with mounts for flatside tanks. Gas caps must be purchased separately gallon Screw-in style cap, stretched tank $ Note: Stretched portion of tank does not hold fuel. Some wide or touring seats may require modification. All fuel tanks must be test fitted, pressure tested, and pre-sealed before painting. Tanks shown painted for illustration purpose only, tanks require finish body work Custom One-Piece Smooth-Top Stretched Tanks for Softail Models Our 2" stretch tanks are new stampings rather than using welded tips to achieve stretch. They come with single flush-mount locking gas caps (included), or for stock-style screw-in gas caps (not included). Single cap tanks have inlet offset to the right side. For the extreme custom Softail models, the 4" stretch tanks have welded wings on the 2" stretch tanks for the ultimate long, low look. Bike builders should note that these tanks, while simply bolting on stock tank mounts on the frame, will require minor finishing (especially with welded tip extensions), and probably a custom seat to fit the rear contours of the extended tank. Fit models from gallon capacity " stretch with single flush locking cap $ " stretch for single screw-in cap (cap not included).. $ " stretch with single flush locking cap $ One-Piece Tank Hardware Kit Softail Models Works with all tanks listed above $29.99 LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS One-Piece Stretched Gas Tanks for Softail Models Smooth top gas tanks come with a single center-mounted aircraftstyle gas cap, and are stretched to 2". Made of heavy-gauge steel and inspected and pressure-tested to ensure quality as well as a perfect fit. Replacement bolt-in aircraft-style gas cap available " stretched, fits all Softail models from 84-99, holds 4.2 gallons $ Note: This gas tank requires modifications on the seat or a custom seat due to the longer length. SHEETMETAL INSTRUMENTS & GAUGES GENERAL Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust. CROSS REFERENCE

22 3.5 Gallon Hand Shift Gas Tanks Two versions of the obsolete hand shift style 3.5 gallon gas tank sets. Accurate placement of the shifter gate lugs and shut-off rod hole centers ensures troublefree service. Available in two versions. One is a totally accurate reproduction of the original, rod-style gas shut-off equipped tank used from The other is based on the same tank, but eliminates the early style gas shut-off rod system and replaces it with the tank bottom fitting for the late 13/16" external-thread petcock. Both tanks accept the correct cam-style gas caps and are designed to accept the stock shifter guide. (Sold separately.) Original style with rod shut-off (shown) $ Updated style for petcock $ Flatside Gas Tanks with Screw-Type Gas Caps Designed to accept screw in caps. Each tank is formed on all-new tooling to ensure quality. Tanks are designed to work with stock and most aftermarket frames with flatside brackets and single large diameter instruments, dashes, trim panels and 13/16" petcocks. Fit Softail models from and most aftermarket frames with mounts for flatside tanks. Gas caps must be purchased separately gallon $ gallon $ Note: Due to the slightly different contour of the 6-gallon tanks, flexible steel, leather or plastic tank panels should be used. All fuel tanks must be test fitted, pressure tested, and pre-sealed before painting. Tanks shown painted for illustration purpose only, tanks require finish body work. ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST Fat Bob Gas Tanks Tanks are designed with accurate, precision-placed mounting plates and stud bosses. For increased durability, low-temperature welding is used throughout the tank. Accepts either the dash for Low Rider models or the Fat Bob dash for FL and FXWG models. Features late 13/16" external-thread fuel valve connections for Original Equipment style gas valves (CC # s 25245, 25243) or high volume versions. Available to accept either pre-1982 cam-style gas caps or later model screw-in style gas caps. They are shipped with a dash spacer kit to accommodate the increased height. Fit all Original Equipment and aftermarket 4-speed Big Twin frames thru 84 (except FXST models). Tanks with Cam-Style Bungs gallon $ gallon $9.99 Tanks with Screw-Style Bungs gallon $ gallon $ gallon $ Gas Tank Accessories Rubber grommet with a steel insert for use in mounting Fat Bob tanks. Helps to isolate the tanks from vibration. Pack of 10 (repl. OEM 111) $0.65 Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust..22 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

23 APPAREL SEATS & BAGS FOOT HAND LIGHTING Custom Smooth-Top Gas Tanks for FXR Models Our 2" stretch tanks are new stampings rather than using welded tips to achieve stretch. They come with flush-mount locking gas cap (included). Single cap tanks have inlet offset to the right side. Tanks fit all models from and have a 4.0 gallon capacity. Models with stock turn signals mounted to the top triple tree must relocate them to avoid contact with the tank " stretch with single flush locking cap $ ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES Fat Bob Gas Tank for FXR Models Classic Fat Bob look for all FXR models from It has the appearance of split tanks, but is really a one piece welded tank with twin screw type filler necks, and 13/16" external thread gas valve fitting. Bolts directly to the stock mounts and accepts all FL-style dash assemblies (except Cateye) when the appropriate dash base is used. Included with each tank is a CC #19095 superflex speedo cable and a chrome tank divider panel. The tanks are even equipped with internal emission control system connections, for use on vehicles WITH fuel tank emission devices (i.e., California models) gallon Fat Bob gas tank for FXR models $ Note: CC #25551 tanks require removal of solder from vent tube prior to installation on vehicle when connecting fuel tank emissions control devices. CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust. CROSS REFERENCE

24 King Tanks for Early Sportster Models 2"-wider than the Standard tank... enough to give extra mileage and just wide enough to make them look great. These high tunnel tanks are equipped with stock mounts but do not include mounting hardware. They have a 3.1 gallon capacity. 3/8" NPT Fuel Inlet Fits all models from $ Fits all models from $ Fits all models from $ EFI Tanks for Late Sportsters Whether you need to replace a damaged tank or just want to add some style to your ride, we have the tank for you. These tanks accept the stock fuel pump and come with or without indents and are available with OEM style screw in caps (sold separately) or our raised custom cap (included) EFI 3.3 gal OEM style tank, screw bung for 07- XL models......$ EFI 3.3 gal OEM style tank, custom cap for 07- XL models..... $ EFI indented 3.3 gal OEM style tank, screw bung for 07- XL models $ EFI indented 3.3 gal OEM style tank, custom cap for 07- XL models $ Replacement custom gas cap $ Stretched One-Piece Fat Bob Gas Tanks for Sportster Models Features a 2"-stretch 3.5 gallon capacity Available in smooth-top versions ONLY Single or dual screw-in caps (not included) Single or dual flush aircraft-style caps with locks are included Smooth-Top for Late Models Fit all Sportster models from (except XL1200S models) With dual screw-in bungs $ With a single screw-in bung $ With dual flush locking caps $ With a single flush locking cap $ Stretched 4 Gallon Tank for Late Sportsters If you are looking for more range or just want to set your Sporty apart from all the others this is the tank for you. Accepts the stock fuel pump, available with or without indents. Some seats may require slight modification (stock solo seat works) Stretched 4 gal tank, screw bung fits XL models 07-Up $ Stretched 4 gal tank, screw bung, indented fits XL models $ Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust..24 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

25 APPAREL SEATS & BAGS Custom Chrome Custom Low Tunnel Gas Tank This 2.8 gallon custom tank features a 1 1/2"-high tunnel with universal style mounts for custom applications. Accepts 3/8" NPT threaded petcock. Tank measures 15 1/2"-long x 9"-wide x 7"-high with a 1 1/2" tunnel Unpainted steel (Bajonett) $99.99 Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting. Peanut Tank for Sportster Models A quality reproduction of the Original Equipment 2.4 gallon gas tank Fits early Sportster and K models from $89.99 Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting. FOOT HAND LIGHTING ELECTRICAL EXHAUST INTAKE Smooth-Bottom Tanks for Sportster Models An updated design with a 3.3 gallon capacity and rounded lower edges. Very similar to the latest factory design, but with petcock locations and mounts for early or late frames. Includes mounting hardware Fits Sportster models from $ ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE XL Flat Bottom Standard & King Sportster Tanks by Paughco Traditional Sportster Standard & King tanks. but modified for universal applications with horseshoe front mounts and tab rear mounts. They are equipped with a bung to accept late model 22mm petcocks and screw-in style gas caps. Made in the USA XL Flat Bottom Gas Tank. 2.9 gals $ XL Flat Bottom King Tank 2.9 gallon $ XL Flat Bottom King Tank 2.9 gallon $ XL Flat Bottom Gas Standard Tank. 2.2-gallon $ ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST. Rubber Mounted 'King' Tanks for Sportster Models Classic good looks of the original Peanut tank, but with increased capacity for an extended cruising range. We took our best-selling 3.25-gallon capacity King tank and added rubber mounts to the front and rear. By isolating the tank, we ve reduced stress on the tank mounts for increased durability. Require vented screw-type gas caps Fits Sportster models from $9.99 Note: Fuel inlet is located on left. WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

26 Detail of Gas Cap Custom Stretched Gas Tank Uniquely-styled tank provides an affordable option in defining your ultimate hand-built custom chopper. Features a long, tapered shape with a raised custom fuel bung. Includes two different caps; 5-bullet style and smooth. Shipped with custom mounting brackets to weld to the frame. Fuel capacity is approximately 3.5 gallons. Tank measurements: Length - 23, Width - 12, Height - 8.5, Tunnel length 21 7/ Fits most aftermarket frames with a minimum of a 3" stretch in the backbone and a 4" stretch in the front downtubes (frame backbone diameters cannot exceed 2") $ Replacement 5 bullet pop-up gas cap $ Replacement smooth pop-up gas cap $ Custom Bobber Style Gas Tanks by Cole Foster An absolutely beautiful new tank designed with the keen styling of Cole Foster - Salinas Boyz Customs. The tanks feature a mini pop-up gas cap, and a unique raised tapered bead down the center of the tank. Each tank has been designed to fit to stock frames but can also be easily adapted to any custom application. They use the existing stock rubber mounts or are included as needed. Fuel capacity is 2.35 gallons Fits Evolution Softail models from and 4-speed FX and FL models and custom applications $ Note: These applications require the front frame dash mount to be cut off and rear screw hole modified Fits carburated Twin Cam 88 Softail models from $ Fits Sportster models from $ Replacement Gas Caps Stainless Steel $ Chrome $42.99 Fuel Tank Liner Kit Northern Fuel Tank Liner is easy to use and effective. It internally seals the multitude of small leaks that often form due to age and rust. It is designed to seal new or existing fuel tanks with minor leaks. The coating is very flexible and does not crack. This gives the repair a much longer life. The polymer was specifically chosen because of its tight adhering qualities. Northern Fuel Tank Liner is resistant to methanol, alcohol and other fuel additives. Northern Fuel Tank Liner levels out to the surface uniformly. You will not get a wide variation in thickness as with some other coatings. Northern Fuel Tank Liner is thicker and usually requires only one coat. Holes up to 1/32nd may be coated and sealed safely. Rust is sealed in so that it cannot flake off Fuel tank liner kit $ Fuel tank liner pint $ Fuel tank cleaner pint $ Fuel tank prep pint $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

27 APPAREL SEATS & BAGS FOOT HAND LIGHTING 6545 ELECTRICAL EXHAUST INTAKE ENGINE GASKETS Indian Larry Dished Tanks The same tanks used on the Indian Larry bike in the build-off series. Old School looks with modern production techniques bring you the cool style you want at an affordable price. Easy mounting by drilling of the backbone and can be adapted to many styles of stock and custom frames. Uses cam lock gas cap (not included). 22mm Fuel Inlet Gallon $ Gallon $ Gallon $ Gallon $ Indian Larry Dished Tank for Sportsters We ve taken one of the coolest tanks in our line, added the correct mounts and made it a bolt on application to transform the looks of your Sportster! Accepts the stock EFI fuel pump and mounts to the stock tank mounting points Dished tank 3.5 gallon for 07- XL models $ Dished tank 4.5 gallon for XL models $ Dished tank 5 gallon for 07- XL models $ TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST. INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

28 Stretched Super Cruiser Steel Gas Tanks for Custom Applications Made of heavy-gauge steel for maximum strength and durability. Designed to use pop-up caps or bolt-in cap kits. Tank must be fitted to frame before painting. Available in a 3.5 gallon with 2" or 5" stretch gal. tank with 2" stretch made for pop-up cap, L- 23.5, W- 13.5, H $ gal. tank with 2" stretch made for bolt-in cap, L- 23.5, W- 13.5, H $ gal. tank with 5" stretch made for pop-up cap, L , W-, H $ gal. tank with 5" stretch made for bolt-in cap, L , W-, H $ Custom Pop-Up Gas Caps Stainless Steel $ Chrome $42.99 Aircraft-Style Bolt-In Gas Caps Comes with mounting ring, gasket, screws and cap Locking vented cap kit $ Non-locking vented cap kit $ Pro Image I & II Chopper Gas Tanks The latest and greatest one-piece chopper gas tanks available! Fabricated from heavy-gauge steel with 4.1 or 4.7 gallon capacities. Compliments chopper frames with 4" downtube stretch and 3" backbone stretch. Backbone outer diameter cannot exceed 1 3/4". Available with flush or raised cap. Includes rubber mounted weldon brackets. Pro Image I Chopper Gas Tanks gallon with flush cap, L , W $ Pro Image II Chopper Gas Tanks gallon with flush cap, L , W - 12, H $ gallon with raised cap $ Special Flush Mount Pop Up Gas Cap Fits CCI , , and $ Custom Narrow Axed style Gas Tank by Paughco This tank features a low tunnel with straight mounting tabs on both the front and rear, single early cam style gas cap with dual threaded 1/4 fuel outlets. Made in the USA gallon Axed Harley-Style Custom tank with single gas cap $ ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST..28 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

29 APPAREL SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE Mini Mustang Gas Tanks by Paughco These small gas tanks look awesome! Great lines, and only 16 1/2 long, 9 wide and 7 deep. For custom applications with 2 mounting styles available. The Narrow Mini Mustang tank has a capacity of 2.4 gals., with tunnel measuring 2 1/4 wide x 2 1/2 deep and front/rear mount tabs. Total length tab center to tab center is 17. The Frisco Mini Mustang tank has a capacity of 2.2 gals. and features a Frisco style front mount. Tunnel measures 3 wide x 1 1/2 deep, and total length tab center to tab center is 15 1/2. Both tanks have 2, 1/4 NPT petcock outlets; petcocks sold separately. Made in Nevada, USA by the crew at Paughco Mini Mustang Gas Tank. Narrow. 2.4 gals $ Mini Mustang Gas Tank. Frisco. 2.2 gals $ /4 NPT Petcock. No reserve $ /4 NPT Petcock. With reserve $56.99 GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS 3.3 Gallon Mustang Tank This one piece tank is perfect for a variety of custom applications. It has rounded mounting plates front and rear that are welded in place. It features a twin cap look, but the left neck is non-functional, for appearance only. The 3.3 gallon capacity tank fills on the rightside only. Tunnel measures 2 1/2"-high x 2 3/4"-wide. Tank measures 18 1/2"-long x 12"-wide Unpainted steel, 3.3 Mustang Tank $ Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting. Mustang Gas Tank with Pop-Up Cap Comes with a center-mounted single pop-up gas cap and has a capacity of 3.3 gallons. Tank measures 16 1/2"-long x 11"-wide at widest point. Total length from tip-to-tip of mounting brackets is approximately 20". Tunnel is approximately 2 3/4"-wide x 2 1/2"-deep. Features a 3/8" NPT gas outlet (use CC # s or petcocks) on the center of the bottom right side as well as two 1/4" gas outlets (use CC # s or petcocks) on both sides near the rear of the tank to be used as a crossover line or, for multiple choices in routing your gas lines. Petcocks sold separately Mustang tank with pop-up cap $ Special Flush Mount Pop Up Gas Cap Fits CCI , , and $54.99 Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting. SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

30 Mustang and Axed Harley-Style Custom Gas Tanks by Paughco Available in two popular styles that will bolt right to the stock frame mounts on Sportsters and have an early cam-style gas cap bung. Made in the USA. Fits Sportster Models from 82-94; with a 22mm threaded fuel bung on the right-side of the tank gallon Axed Style Custom tank with single gas cap for XL $ gallon Mustang Style tank with single gas cap for XL $ Fits Sportster Models from 95-03; with a 22mm threaded fuel bung on the left-side of the tank gallon Axed Style Custom tank with single gas cap for XL $ gallon Mustang Style tank with single gas cap for XL $ ALL FUEL TANKS MUST BE TEST FITTED, PRESSURE TESTED AND SEALED WITH CCI TANK SEALER BEFORE PAINTING TO PROTECT THE FINAL FINISH AND PREVENT INTERNAL RUST Narrow Mustang Style Tank This sleek looking gas tank features dual bung type caps, holds 2.2 gallons of gas and measures 16 1/2 long, 9 wide and 7 deep. Tunnel is 2 1/2 wide x 2 1/4 deep. Center line hole-to-hole on mounting tabs is 17 1/2. Tank has two 1/4 gas outlets (use our # or petcocks). This is a sweet looking tank and goes great with narrow springers or our girder set-up. Gas caps and petcocks not included. Made in USA by Paughco gal dual cap narrow mustang type tank $ gal single cap narrow mustang tank $ Wasp Custom Chopper Gas Tank Building a trick chopper but haven t found the prefect tank for it yet? Look no further! This 2.2 gallon tank with it s tear drop shape is perfect for any retro scoot. Available with one or two cam style bungs, TIG welded with the petcock bung on the right side Wasp chopper tank $ Wasp chopper tank dual cap $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

31 APPAREL SEATS & BAGS FOOT Universal Tank Mounting Kit for Builders Building your own tank you say, well how are you going to mount it? This complete set of tank mounts comes with not only the straps and rubber mounting parts to go on the frame, but also the machined blocks that are welded into the fuel tank for them to bolt to Universal Tank Mounting Kit $72.99 Universal Fat Bob Gas Tank Quickmount Kit A precise and effortless way to mount Original Equipment or aftermarket Fat Bob tanks to custom or Original Equipment frames that have had the gas tank brackets removed. It permits the builder to temporarily attach the one-piece bracket for a quick visual check of tank placement on custom applications, and once a tank position is selected, the entire bracket assembly may be welded in place for a stronger-than-stock, precision system of support Universal Fat Bob Gas Tank Quickmount Kit $47.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE Custom Hardware Kit for Flatside Tanks Chrome-plated beveled washers and countersunk mounting screws provide a custom look. They replace the cad-plated Original Equipment screws and washers Fits all Softail models from $15.99 Mounting Kit for Fat Bob Tanks Hardware kit includes bolts, nuts, washers and spacers for mounting Fat Bob tanks on 4-speed style Big Twin frames through 84 and most customs Mounting Kit for Fat Bob Tanks $6.99 ENGINE GASKETS Universal Tank Mount by Vulcan Engineering Milled from 1018 CF Steel, Not stamped! 1/4 Thick with mounting holes for use with standard rubber tank mounts. Perfect for mounting custom gas tanks or any other applications you can come up with. Made in the USA. Sold each Universal tank mount $10.99 TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES Rubber Mounts for Flatside Gas Tanks Accurate reproductions of the Original Equipment parts used to mount flatside gas tanks to 4-speed FX models 85-86, and Softail models from Pack of 6. Replaces OEMs 147, Flatside Rubber Mounts, price each $2.50 Mounting Kit for Fat Bob Tanks A must when installing CC or Original Equipment Fat Bob tanks on 4-speed frames through 84. Special washers in kit prevent possible thread damage to rear mounting holes and keep tanks from resting against heads Mounting Kit for Fat Bob Tanks $9.99 Another must for installing Fat Bob tanks. One of our mechanics came up with this little item. It s actually the chain guard mounting grommet, but it works great in the front Fat Bob tank mount holes to isolate the tanks from vibration Rubber grommet with a steel insert for use in mounting Fat Bob tanks. Helps to isolate the tanks from vibration. Pack of 10 (repl. OEM 111) $0.65 Custom Mounting Kit for Flatside Tanks A complete kit that can be used to update your existing flatside tank mounts, or used on newly-constructed bikes instead of purchasing Original Equipment parts. The beveled washers and countersunk mounting screws are chrome-plated, and provide a custom look Fits 84 Softail models, and all models with split tanks from $49.99 CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

32 Flush Mount Pop-up Caps for Sportsters These are the sleekest gas caps around! The flawless pop-up mechanism is easy to handle and the added trim ring provides paint protection and great looks. Sold each. Will not fit XL1200C. Caps for 98up XL with 3.3 Gal tanks Flush mount cap 3.3 gal, chrome $ Flush mount cap 3.3 gal, black $70.99 Caps for 98up XL with 2.1 and 4.5 Gal tanks Flush mount cap 2.1 & 4.5 gal, chrome..... $ Flush mount cap 2.1 & 4.5 gal, black $ Low Profile Stainless Steel Gas Cap Sets These polished gas caps feature an extremely low-profile with either a peaked or domed top design. They fit all models with screw-type gas tanks from late 96-Up. Sold in matched sets with left and right hand threads Peaked set $ Black, Peaked set $ Domed set $ Black, Domed set $47.99 Renegade Bandit Stainless Steel Gas Cap Sets with Paint Protectors by Landmark Never chip or scratch your paint again. Durable alloy paint protector screws into the stock filler neck offering a permanent air tight seal. The polished stainless gas cap threads into the protector. Fit all models with screw-top tanks. For Models from L96- Bandit Price Renegade Price $ $ Matched cap set with left and right-hand threads $ $59.99 Single vented gas cap Note: In mid-96 the OEM tank design changed. The gas tank bung on these later models DOES NOT have any welding bead above the sheet metal surface of the tank. For Models from 82-E96 Bandit Price Renegade Price $ $ Matched cap set with left and right-hand threads $ $59.99 Single vented cap Screw-In Style Pop-Up Gas Caps Give your gas tank a custom look without having to cut, weld or re-paint! These caps simply screw into your existing tank bungs. They fit in nearly flush when closed; opens easily with just a 1/4 turn of the center of the cap. Billet aluminum construction with either a chrome-plated or wrinkle black finish. Available for a wide variety of models & years. Fits 96-Up Models Pop-Up gas cap set includes one vented & one dummy cap, chrome $ Pop-Up Gas cap set includes one vented & one dummy cap, wrinkle black $ Pop-Up gas cap set includes one vented & one non-vented gas cap, chrome $ Pop-Up gas cap set includes one vented & one non-vented gas cap, wrinkle black $ Vented Pop-Up gas cap, chrome (sold each) $ Vented Pop-Up gas cap, wrinkle black (sold each) $ Non-vented Pop-Up gas cap, chrome (sold each) $ Non-vented Pop-Up gas cap, wrinkle black (sold each) $29.99 Fits Models Pop-Up gas cap set includes one vented & one non-vented gas cap, chrome $ Pop-Up gas cap set includes one vented & one non-vented gas cap, wrinkle black $ Vented Pop-Up gas cap, chrome (sold each) $ Vented Pop-Up gas cap, wrinkle black (sold each) $ Non-vented Pop-Up gas cap, chrome (sold each) $ Non-vented Pop-Up gas cap, wrinkle black (sold each) $29.99 Replacement Parts Replacement o-ring for Pop-Up gas caps $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

33 APPAREL Dual Flush Locking Gas Cap Set Dual flush locking gas caps for use with most aftermarket gas tanks that accept flushmounting gas caps Replacement dual flush locking caps $51.99 SEATS & BAGS FOOT HAND Deluxe Scalloped Gas Caps Chrome deluxe gas caps with scalloped edges. Available vented or non-vented for most Big Twin and Sportster models. Also fits most after-market replacement gas tanks. For models Vented $ Non-Vented $15.99 For models Deluxe gas cap set chrome (one vented and one non-vented cap) $ Deluxe vented gas cap chrome $ Deluxe non-vented gas cap chrome $ Deluxe gas cap set black (one vented and one non-vented cap) $ Deluxe vented gas cap black $ Deluxe non-vented gas cap black $19.99 For 96- models Deluxe gas cap set chrome (one vented and one non-vented cap) $ Deluxe vented gas cap chrome $ Deluxe non-vented gas cap chrome $ Deluxe gas cap set black (one vented and one non-vented cap) $ Deluxe vented gas cap black $ Deluxe non-vented gas cap black $19.99 Spinner Style Gas Caps Give your bike a touch of hot rod with these spinner style gas caps. Available in chrome or black finish for most model years. Dummy caps to replace the fuel gauge on 00-Up models are also available. Sold each. Screw in style 96-Up Spinner cap, 96-Up, vented, chrome $ Spinner cap, 96-Up, non-vented, chrome $ Spinner cap, 96-Up, vented, black $ Spinner cap, 96-Up, non-vented, black $ Spinner cap dummy left, 00-Up, chrome $ Spinner cap dummy left, 00-Up, black $49.99 Screw in style Spinner cap, 82-95, vented, chrome $ Spinner cap, 82-95, non-vented, chrome $ Spinner cap, 82-95, vented, black $ Spinner cap, 82-95, non-vented, black $49.99 Cam style Spinner cap, cam style, 65-72, vented, chrome $ Spinner cap, cam style, 65-72, non-vented, chrome.... $ Spinner cap, cam style, 65-72, vented, black $ Spinner cap, cam style, 65-72, non-vented, black $49.99 LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS Steel Gas Caps Perfect mechanical reproductions of the Original Equipment parts. The low-pressure relief vent is properly recessed in the cap to clear the filler neck vent tube. For screw-style tanks from Chrome Set of left and right caps $ Right side cap only (vented) $ Left side cap only (non-vented) $11.49 Black Black set of left and right caps $ Black right side cap only (vented) $ Black left side cap only (non-vented) $ Early-Style Gas Caps for Late Chrome gas caps for Big Twin and Sportster models from (except FLT and FXR models). Chrome Vented Early-Style Gas Cap $ Gas cap set. Includes one vented and one non-vented $16.99 Black Black gas cap set. Includes one vented and one non-vented $ Black vented $6.49 SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

34 Screw-in Gas Caps with Aircraft Look Now you can enjoy the high-tech aircraft cap look without the hassle of re-working your existing tanks. These screw-in gas caps are chrome plated, solid billet aluminum and have actual countersunk stainless Allen head fasteners around the outside edge. Center lever raises and lowers just like other aircraft caps, except turning it removes the entire cap, not just the center plug. No modification required, fits (except FLT and fuel gauge cap). Caps are non-locking Gas cap set. Includes one vented and one non-vented....$ Vented (right side, right hand threads) $21.99 Skull Locking Gas Caps Black locking gas caps with a chrome skull on the lock cover. Sold with two keys as a set or individually Skull locking gas cap vented $ Skull locking gas cap non-vented $ Skull locking gas cap set $ Skull locking gas cap vented 96-Up $ Skull locking gas cap non-vented 96-Up $ Skull locking gas cap set 96-Up $ Original-Style Cam-Style Gas Caps A variety of replacement and custom gas caps. Available vented for single cap gas tanks and the right side of Fat Bob gas tanks, or without a vent for the left side of Fat Bob tanks. They fit Original Equipment and replacement tanks with cam-style bungs. Polished Stainless Steel Late-Style Caps Plain cap set, includes left and right caps for Fat Bob tanks $ Vented cap ONLY $ Non-vented cap ONLY $.49 Chrome Original-Style Gas Caps Plain cap set, includes left and right caps for Fat Bob tanks $ Plain vented cap ONLY $ Plain non-vented cap ONLY $ Late-Style Gas Cap Gaskets Quality replacement rubber gaskets that fit Original Equipment and aftermarket gas caps. Sold in packs of For threaded style gas caps on all models from $ or 5.0 gallon right side and all single tanks $ and 5.0 gallon right side tanks from $ and 5.0 gallon left side tanks from $1.00 Aircraft-Style Gas Cap Sets Low profile high-tech gas caps. Designed to be used with aircraft-style custom tanks. Weld-In Cap Kits Kits include weld-in bungs and caps. Locking Gas cap set, vented and non-vented $59.99 Non-Locking Gas cap set, vented and non-vented $ Vented cap kit ONLY $29.99 Bolt-In Cap Kits Kits include mounting rings, gaskets, screws and caps. Locking Gas cap set, vented and non-vented $ Locking vented cap kit $42.99 Non-Locking Gas cap set, vented and non-vented $ Non-locking vented cap kit $39.99 Replacement Parts Non-vented cap without lock ONLY $ Non-vented cap with lock ONLY $ Vented cap without lock ONLY $ Vented cap with lock ONLY $ Vented bolt-in trim ring (sold each) $ Non-vented bolt-in trim ring (sold each) $ Bolt-in cap trim ring gasket (pack of 10) $ Chrome mounting screws (pack of 12) $ Filler cap set, without lock. Includes vented and non-vented $ Filler cap set, with lock. Includes vented and non-vented $42.99 Note: Aircraft Caps Available with or without Locks for Either Bolt-In or Weld-In Applications.34 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

35 APPAREL SEATS & BAGS FOOT Custom Flamed Gas Caps These flamed gas caps fit screw style bungs and are available as a set or individually. Black and chrome finish Flame gas cap set $ Flame gas cap right hand vented $ Flame gas cap left hand non-vented $33.99 Custom Mini Gas Cap Kit The gas cap is CNC-Machined from billet aluminum with a knurled edge with a satin/raw finish (gas cap has an O.D. of 1.75 ). Kit comes complete with gas cap and steel weld-in bung Mini weld-in gas cap $39.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE Custom Skull Gas Caps These gas caps match many of the other custom skull design parts in the catalog. They come in chrome skull with black eyes or black skull with chrome eyes and fit screw style bungs Skull gas cap set chrome $ Skull gas cap set black $ Skull gas cap right hand vented chrome.... $ Skull gas cap left hand non-vented chrome. $ Skull gas cap right hand vented black $ Skull gas cap left hand non-vented black... $ Live To Ride Gas Cap Covers Covers with chrome eagles feature a A Way of Life banner. Gold eagles have Eagle Spirit banners. They attach with double-sided foam tape and fit all late model gas caps (except molded plastic caps). A Way of Life Chrome eagle (sold each) $10.99 Eagle Spirit Gold eagle (sold in pairs) $33.99 GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS Custom Pop-Up Gas Caps Vented gas caps that don t protrude from the surface of the gas tank at all! To access the filler, you press and twist... the cap pops up, then unscrews normally For custom weld-in applications ONLY Sold each Stainless steel bung and cap $99.99 Replacement Pop-Up Caps ONLY Stainless Steel $ Chrome $ Dimensional Gas Cap Covers Distinctive covers are sandcast from hand-carved originals. Designed to fit over OEM style caps. Glue them on with 5-minute epoxy, or use silicone adhesive (not included). Sold each Skull $ Flame $27.99 Polished Aluminum Skull Gas Cap Cover Multiple skull design cast from an original hand-carved mold. Attaches to OEM style gas caps with epoxy (not included). Sold each Polished Aluminum Skull Gas Cap Cover $21.99 SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

36 Fuel Tank Outlet Plug Used to plug the outlet on fuel tanks that use either fuel-injection or petcock adapter # Also for use on aftermarket fuel tanks that have dual fuel outlets when only one is required. Polished chrome finish and includes o-ring Polished chrome fuel tank outlet plug $8.99 OFF ON RES DOWN OFF ON RES STRAIGHT Chrome Replacement Petcocks Chrome-plated duplicates of the stock gas valves used from Available in three different outlet tube options, straight down, left-hand or right-hand for applications at the front, rear, or either side of the gas tanks. Complete with a chromed 13/16" nut and nylon mesh filter screen Straight down spigot $ Left-side spigot $ Right-side spigot $ Replacement 3-hole Viton seal (fits latest design with.260" fuel tubes) $1.50 Replacement Filter Screens Fits OEM pre $3.99 OFF ON RES OFF ON RES BACKWARD FORWARD Petcock Adaptor Allows the use of a 22mm petcock in a fuel tank designed for Delphi fuel injection. Accepts any petcock that installs using a 22mm nut, chrome finish and includes o-ring. Sold each mm petcock adaptor $9.99 Click-Slick Petcocks by Goland Products Manufactured from 360 brass with stainless steel ball bearings and components Stainless steel internal ball bearings provide virtually friction-free movement of the petcock handle Available in either a brass or chromeplated finish Features quick detents with a 90º movement from on to off to reserve Made in the USA Chrome Click-Slick Petcocks with 22mm Threads for Fuel Tanks from Rear Facing $ Downward facing $ Forward facing $ Straight facing $ Click-Slick Petcocks with 3/8 -NPT Threads for Fuel Tanks Pre Rear Facing $ Downward facing $ Forward facing $ Straight facing $ Black Oxide Click-Slick Petcocks with 22mm Threads for Fuel Tanks from Rear Facing $ Downward facing $ Forward facing $ Straight facing $ Click-Slick Petcocks with 3/8 -NPT Threads for Fuel Tanks Pre Rear Facing $ Downward facing $ Forward facing $ Straight facing $ Weld-In EFI Plate for Custom Tanks Covert any custom tank to EFI by welding this plate into the base of the tank. Then bolt in an (OEM ) Sportster type fuel pump (not included) and you are ready to go. Plate dimensions are approximately 8.5 x 5.25 total width and length. Minimum width and length of space required for the pump 6.25 x Weld in plate for fuel pump.$ Chrome Petcocks Engineered and designed to eliminate all internal O-rings. The innercore design insures against gas leakage while providing maximum flow. Features a filter screen, reserve setting, and chrome body Fits OEM and custom tanks thru 74 with internal 3/8" NPT connection $ /8 NPT Petcock w/90 degree outlet. With reserve $ Fits OEM and custom tanks with external 13/16" nut connection $ Same fit as CC #25245 but with 90 barb $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

37 APPAREL SEATS & BAGS FOOT Accel High-Flow Petcocks American-made high-flow petcocks feature chrome-plated bodies and 5/16" O.D. hose barbs. Other features include a reserve function, 100 micron filtering screens, and easy-to-grasp handles. Bodies are engineered to prevent leakage, yet deliver maximum fuel flow for high-performance applications. Two of the petcocks have a swiveling banjo which rotates 180 for custom hose routing. Fit all Original Equipment or aftermarket tanks with 22mm bungs Petcock with rotating barb $ Petcock with straight down barb $ Petcock with vertically rotating barb $ /4 Petcocks for Custom Tanks These petcocks are available with or without the reserve feature, and fit any custom gas tank such as our aluminum peanut tank (#632501) and Paughco gas tanks that take 1/4 petcocks /4 NPT Petcock. No reserve $ /4 NPT Petcock. With reserve $56.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE Viton Seals for Petcocks Viton material eliminates the swelling problems associated with the various fuels available today. The 3-hole design (not shown) fits petcocks with.260"-diameter fuel tubes. Pack of hole seal $ Replacement 3-hole Viton seal (fits latest design with.260" fuel tubes) $ K&N Nylon Inline Fuel Filters Fit 1/4" fuel line Large (card of 12) $ Small (card of 12) $6.75 Wing Type Fuel Valve This classic was used on early Sportsters but it can be used on any tank with a 3/8 NPT petcock outlet Wing type fuel valve $18.99 GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS See-Flow Glass Fuel Filters A custom in-line fuel filter for 1/4" or 5/16" line. SHEETMETAL Vacuum Petcock Bypass Kit Bypass the Original Equipment vacuum operated petcock. Easy to install. Fits most Big Twin and Sportster models from (except fuel injected models) Vacuum Petcock Bypass Kit...$17.99 Chrome Fuel Filter Small size, but packs big protection for your motor. Easily cleaned, reusable screen. Chrome For 5/16" fuel line $ For 1/4" fuel line $6.99 Black For 5/16" fuel line $ For 1/4" fuel line $6.99 Chrome Complete filter for 1/4" line $ Complete filter for 5/16" line $9.99 Black Black filter for 1/4 line..... $ Black filter for 5/16 line.... $9.49 Replacement filter element Replacement element..... $2.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

38 EFI Fuel Line Kits by Goodridge USA These durable and attractive kits feature your choice of either clear or black PVC coated, Teflon lined, stainless steel braided hoses with chrome plated steel valves and hardware. Kits come complete with fuel line, necessary hardware and replacement o-rings. Clear coated Braided Stainless Steel 6176 Fits all Touring models and 04-Up Dynas $ Fits all 08-Up Touring models $ Fits all 07-Up Sportster models $68.99 Black PVC coated Braided Stainless Steel 6175 Fits all Touring models and 04-Up Dynas $ Fits all 08-Up Touring models $ Fits all 07-Up Sportster models $ Hi-Flow Braided Fuel Line Crossovers by Goodridge These durable and attractive pre-made lines feature clear-coated stainless braided hose and chrome-plated steel compression fittings for easy installation. They are also available in a universal fitment for custom applications with 1/8 NPT ports in the bottom of the gas tank. Model Specific Pre-Made Fuel Line Crossovers 6026 Fits all FL/FX Softail models from $ Fits all FL/FX Softail models from 00-Up $ Fits all FXSTD Deuce models from $ Fits all FXD Dyna models from $ Fits all FLH/FLT Touring models from $28.99 Universal Pre-Made Fuel Line Crossovers Universal fuel line crossover with 1/8 NPT fittings $ Universal fuel line crossover with 1/8 NPT fittings $22.99 Replacement Parts pack small repl. seals for CCI # 6027, 6028, 6029, $ pack large repl. seal for CCI # $2.99 Quick Disconnect Fuel Crossover by Goodridge The stainless braided hose is compatible with gasoline, coolants, and ethanol. The hose finishers feature a stainless gear drive hose clamp for a reliable, long lasting seal. Chrome plated quick disconnect features durable viton o-rings to prevent leakage, stainless shut off valves eliminate fuel loss during tank removal, and QD assembly is rated at 250 PSI Universal design fits most models 6248 Crossover fuel line. $ Replacement o-rings (2 pack) $1.75 Steel Braided Fuel Line Kit This kit can be used to replace the fuel crossover line (between tanks) or fuel feed line (between petcock and carburetor). Fits all models with 1/4" I.D. fuel lines. Kits include 16" braided hose and a pair of chrome end caps Steel Braided Fuel Line Kit....$15.99 Goodridge High Pressure Braided Fuel Line Kit for Fuelies Finally! Great looking fuel lines for your fuel-injected bike. Cleans up the last area to set off your custom paint job. 969 Fits all fuel injected models from $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

39 APPAREL SEATS & BAGS FOOT Inferno Dash Chrome-plated, die-cast metal dash matches the styling of the wide range of Inferno accessories. Complete with mounting hardware and rubber trim. Fit all Big Twin models (except Dyna Wide Glide models) from equipped with Fat Bob tanks and a pre-96 FL-style speedometer Long Inferno dash $ Long Mirage Dash Cover for Fat Bob Tanks Die-cast dash has a chrome-plated finish. Includes two extra-long trim pieces, a longer tripmeter reset knob and our unique rear hold-down. For all Big Twin models with two-piece Fat Bob or flatside gas tanks and Fat Bob speedometers (except Dyna Wide Glide models) Complete dash kit $9.99 Replacement Parts Trim rubbers (sold in pairs) $4.99 Arlen Ness Flow Dash for Touring Models The latest design from Ness looks great on 08-Up Road Glide or Street Glide models. This unique design will bring life to your tank and give it a custom look. Constructed of heavy ABS plastic for premium quality and durability, comes ready to paint Fits all 08- Road Glide and Street Glide models.... $ HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE Arlen Ness Winged Dash & Tank Extension for Touring Models This new tank extension gives you the look of a sleek custom tank at a fraction of the cost. No cutting, grinding or welding necessary. This piece bolts directly onto your stock 09-Up Road Glide or Street Glide gas tank. Constructed from high quality composite materials for maximum strength. Each piece comes primed and ready to paint. Installation will require the use of a custom seat modification the factory seat Fits all 09- Road Glide and Street Glide models.... $ Note: Requires the use of a custom seat or modification to the OEM seat! WHEELS TIRES & BRAKES CHASSIS SHEETMETAL The Stash Dash for Touring Models This dash is the perfect replacement for the stock unit on you Bagger. It not only cleans-up and improves the profile of the gas tank but it also has a inner compartment which houses the gas cap and has a storage area for paperwork or other small items. It is available in either a chrome-plated finish or raw steel so you could paint it to match. It is designed to fit all FLHT, FLHTC, FLHX, and FLTR models. Installation of this dash will require the use of a 97-later style Road King/ Street Glide seat Chrome Stash Dash for Touring Models $ Custom Dash for Stretched Tanks Durable and paintable ABS plastic dashes with unique design for custom stretched tanks Custom Dash with lamp lenses..$76.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

40 Gas Tank Knee Pads These universal fit rubber knee pads affix to your tank with double sided adhesive (included) and give tanks a very cool old school look! Available in 2 sizes to match most any tank configuration out there. The smaller size measures approx. 7 long x 3 1/2 tall at the highest point. The larger version measures approx. 7 long x 4 tall at the highest point. Stick these puppies on your tank and stand out from the crowd! Sold as pairs Gas tank knee pads-small.....$ Gas tank knee pads-large....$29.99 Skull Lower Tank Panel Multiple skull design cast from an original hand carved mold Fits most Fat Bob cast dashes from $42.99 Chrome Skull Nut Cover Made in the USA by Wild 1 Mfg. to cover the hardware that holds the dash in place. Kits include red rhinestones for the eyes. Fits the cast dash on models without a dash-mounted choke cable Chrome Skull Nut Cover......$17.99 Dash Center Mounting Bolt and Stud Includes chrome-plated center screw with stud and hardware. Fits Big Twins from as original part replacement or can be used on custom applications where choke wire is not brought through dash. Sold each Dash Center Mounting Bolt and Stud $5.99 Dash Panels for Fat Bob Tanks Fits FX and Low Rider models with Fat Bob gas tanks from Plain Dash Panel (repl. OEM T) $25.99 Chrome Tank Panel New-style, show-chromed tank panel for Softail and FXWG models from Chrome tank panel $35.99 Dash Panel for Fat Bob Gas Tanks Fits Fat Bob gas tanks when dash or instruments are not mounted on tanks Plain Dash Panel for Fat Bob Gas Tanks $23.99 Chrome Tank Panel Fits most models with split tanks, cast dash and a frame-mounted seat from Replaces OEM Chrome Tank Panel $27.99 Steel Chrome Dash for FX Models Stamped steel, chrome-plated instrument housing for tank mounted gauges on FX models from Includes thick style tank-to-housing trim rubber and warning light hole plugs for custom applications Dash cover $ Replacement trim rubber (repl. OEM ) $ Hole plugs (pack of 10) $1.50 Chrome Dash Kit All the chrome parts in one convenient kit to help you convert to the dash used on several models Will not work with flatside gas tanks Chrome Dash Kit $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

41 APPAREL SEATS & BAGS FOOT Chrome Dash and Speedometer Kits Includes a speedometer with face, chrome dash, lenses, rubber trim, mounting hardware, ignition switch with two keys and base plate with lights. Fit many models with Sport Bob and Fat Bob tanks thru :60 ratio for front wheel speedometer drive models with selfcancelling turn signals from $ :60 ratio for front wheel speedometer drive models without self-cancelling turn signals from $ Chrome Die-Cast Dash Kit for Fat Bob Tanks Kits include chrome die- cast dash with trim rubber and lenses, speedometer, ignition switch and base plate assembly with hardware. Ideal for ground-up assembly or Fat Bob tank conversions. Available with 1:1 drive ratios :1 ratio kit. Fits FL models 62-80, FX models and FXWG models $ HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS Rubber Dash Trim This handy item is designed to replace the rubber dash trim on FXR models and the nacelle trim on FLHS models. The trim is also a perfect match for Custom Chrome Rick Doss ABS dashes and many other protective uses.50"-long Replaces OEM $4.99 TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES Dash Kit with Integral Tach Features a 120 mph speedometer with built-in coil driven tachometer that works with all Harley 12 volt systems. Kit includes speedometer, two-light chrome dash cover, base plate with hardware, and ignition switch with keys :1 speedo/tach dash kit.....$ Note: self-canceling turn signals will not self cancel models use a distance counting reed switch to selfcancel turn signals. The turn signals will operate normally, but will not self cancel. See Section 15 for more Speedometers and Gauges Chrome Dash and Mounting Kits These chrome kits contain the dash mounting and trim parts required for Fat Bob tanks in a single, easy-to-order package - simply choose from our great variety of large diameter speedometers to complete the installation. Each kit comes complete with chrome dash cover, base plate assembly with hardware and ignition switch with keys Cateye dash and mounting kit $ Two-light dash and mounting kit $ Three-light dash and mounting kit $ Late-style dash and mounting kit $ Note: Not compatible with flat side tanks. Custom Dash Cover This custom dash cover has had the indicator lights and switch hole removed for a clean custom look. Designed for use with large diameter FL style speedometer and Fat Bob tanks. Perfect for custom FX and FL applications with remote mounted indicator lights and ignition switches. Fits all Big Twin 4-speed models Dash only (fits all two-light base plates) $35.99 CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

42 Two-Light and Three-Light Dashes for Fat Bob Tanks Show-chrome dash covers complete with lenses and trim rubber. Replacement lenses and trim rubber also available separately light dash $ light dash $ Replacement trim rubber......$4.99 Classic Cast Dashes Heavy-duty zinc die-cast dashes are beautifully chrome-plated duplicates of their Original Equipment counterparts. Complete in every detail, each dash also includes the lenses, light divider, and trim rubbers. May be installed on most 4-speed frames and Softail models when the appropriate dash base is used Fits all models (replaces OEM B) $ Fits all models with self-cancelling turn signals from (except Dyna Wide Glide models) replaces OEM $69.99 Replacement Parts These pieces will fit Original Equipment dashes as well as the dashes listed above Lens kit: Includes lenses, divider and hardware $ Trim rubbers (pair) replaces OEM $ Cast dash mounting plate....$44.99 Three-Light Dash Mounting Plate Includes wiring and sockets Fits CC dash # $ Replacement dash base light sockets (pack of five) $22.99 Cateye Dash for Fat Bob Tanks Show-chrome cateye-style dash with lenses. Replacement lenses are sold each Cateye dash $ Cateye red lens-plastic $4.49 Plain Dash Mounting Plate Basic mounting plate for use with Fat Bob dash covers #25972 and #26188 when dash lighting is not desired Without dash lights $.99 Late-Style Cast Dash Mounting Plate A complete mounting kit for many models with cast dashes from (except Dyna Wide Glide models). Includes all the hardware and spacers necessary to fit both the standard early-style Fat Bob tanks and the later-style flatside Fat Bob tanks. Also included are the circuit breaker clips, the rubber strip for mounting circuit breakers with flatside tanks, ignition switch mounting screws, three insulated terminal studs and five light sockets with bulbs. Everything necessary for a quick and easy installation. Cast dash cover not included Cast dash mounting plate....$ Replacement dash base light sockets (pack of five) $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

43 APPAREL SEATS & BAGS Trimlok Dash Trim Easy-to-install, while providing style and protection. Genuine Trimlok steel reinforced vinyl trim is cut to length to fit all stamped steel two and three-light dashes. Available in pre-cut 27 inch and 10 foot lengths in plain black Black (27"-long) $ Black (10 feet-long) $1.00 Odometer Reset Cable for FX Models Complete odometer reset cable assembly for all 4-speed FX models (except FXWG) Includes chrome knurled knob, rubber grommet, washer, spring and flexible cable. Fully assembled, ready to install Replaces OEM T $10.90 FOOT HAND LIGHTING ELECTRICAL Hi-Beam Indicator Lamp Original style, multi-piece high beam indicator lamp assembly with replaceable bulb included. Fits FX models from 73-74, as well as Sportster models from Can also be used to replace the one-piece throwaway indicator lamp used on FX models from Replaces OEM $8.99 EXHAUST INTAKE ENGINE Trim Rubber for Low Rider Dash Thick style, black rubber trim for FX dual gauge housings. Neatly fills the open space between the tanks and the instrument housing while isolating the gauges from vibration Replacement trim rubber (repl. OEM ) $ GASKETS TRANSMISSION & CLUTCH Dash Switch Decal Fits FL models from 68-84, FX models from 71-72, FXWG models from 80-86, and Softail models from Sold in pack of Replaces OEM $ Replacement Lenses for Fat Bob Dash Covers Can be used to restore Original Equipment dashes or as replacement parts for CC dashes. Sold each Cateye red lens-plastic $ light dash red lens (2 used) plastic $ light dash blue lens (1 used) plastic $ light dash red lens GEN / OIL plastic $ Cateye dash lens, green $4.49 DRIVELINE WHEELS TIRES & BRAKES CHASSIS Instrument Light Socket Assemblies OEM style replacement light socket assemblies include socket with wire and bulb. Available for most Big Twins and Sportster models Sold in 5 packs Steel, 1 wire type $4.80 Chrome Dash Cover Screws Complete 4-piece set of chrome plated, buttonhead panel screws. Fit all Low Rider and FXEF dashes Set of Chrome Dash Cover Screws $3.99 SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

44 Chin Fairing Big Twin models Constructed of high-impact A.B.S. plastic, this chin fairing is easily painted to match any bike. Mounting is achieved with large cushioned clamps, and it will even clear stock or aftermarket highway peg kits. Includes mounting hardware and instructions Fits all FXR models from and Softail models from (except Fat Boy and Heritage Softail models) $ Fits all Dyna Glide models from $6.99 Arlen Ness Side Covers for FXR Models Fit all FXR models from 82-94, (and 99 FXR II and FXR III models) and replace the Original Equipment parts. Manufactured from high impact black A.B.S. plastic which can be painted to match any bike. When installed, they fit between the frame tubes in the area below the seat and cover the brake and electrical components. Sold in pairs Plain Side Covers $99.99 Chin Fairing for Evolution Sportster Models Constructed of high impact A.B.S. plastic, this chin fairing is easily painted. Mounts with large cushioned clamps. Although it s designed to fit all Evolution Sportster models from 86-03, it can be modified to fit on earlier models. Includes hardware and instructions Unpainted chin fairing $ Chrome Side Covers for FXR Models Perfectly chrome-plated steel side covers to replace the standard plastic covers. Fit all FXR models from FXR Side Covers $ Well-nuts blind fasteners (repl. OEM 8099) pack of $1.30 Chrome Ignition Module Cover Chromed steel cover replaces the standard black metal cover on Sportster models from Replaces OEM T $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

45 APPAREL SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL EXHAUST INTAKE Oil Cooler Kit by Pegasus Performance This billet oil cooler kit comes with braided steel hose, chrome hose ends, fittings and billet frame clamps. Installation on Twin Cam models requires the purchase of an oil filter adapter kit and additional fittings. Mounts to the downtubes on Softail and Touring models. Made in the USA Polished billet oil cooler kit $ Black anodized billet oil cooler kit $ Oil Cooler Adapter for Twin Cams Oil cooler adapter $ Billet Re-Useable Oil Filters by Pegasus Performance Finally a re-useable oil filter for your Twin Cam or EVO engines. CNC-Machined from billet aluminum and available in either a Polished, Satin, Black anodized, and Black anodized with highlighted fins. It has a special removable/washable micronic 304 Stainless Steel mesh filter and 3 high-power magnets grab any metal particles before they even get to the filter. This filter also increases overall horsepower by 3%-5% by keeping the engine cooler and allowing the oil to flow more freely, which reduces oil temperature as well as oil levels in the engines sump thereby reducing oil/flywheel obstruction. Bottom line this oil filter, filters better than any paper filter on the market, never needs to be replaced, and is an environmentally green product. Fits all Twin Cam and Evolution engines. Made in the USA Polished $ Satin $ Black Anodized $ Black Anodized with highlighted fins $9.99 Replacement Parts Replacement oil filter cartridge $ Replacement O-ring $2.49 ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES Super Mini Oil Cooler Kit Kit includes clamps, hose ties, and oil line. Black only. Measures 5"-high x 2"-wide x 1"-thick Super Mini Oil Cooler Kit $38.99 GENERAL CROSS REFERENCE

46 KEEP YOUR COOL EVEN IN STOP AND GO TRAFFIC UltraCool Oil Cooling System Features Heavy Duty Design All steel housing for increased durability Sturdy ABS grill deflects road debris from fans Heavy-duty 1/8 inch thick mounting bracket Custom Oil Adapter Solid aluminum construction with a silicone coated gasket 6-bolt pattern for a leak free installation Built in thermal switch to help maintain the proper oil operating temperature Dual Fan Technology Compact yet powerful blade design for maximum air Powerful dual 90CFM fans Fans are rated to IP55 standards to resist dust and moisture invasion Braided Stainless Steel Oil Lines Assembled from 304 stainless braiding with PTFE silicone tubing AN-6 fittings for maximum oil flow LED Indicator Light Dash mounted LED for high visibilty. A clear indication your fans are working. Another UltraCool exclusive. Heat Exchanger Highly efficient 17-row design for maximum oil cooling.46 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

47 APPAREL SEATS & BAGS FOOT HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS UltraCool Oil Cooling Systems Most riders will agree that when you are stuck in stop-n-go traffic or riding on those hot summer days, is when your bike will start to build up excessive amounts of heat leading to loss of performance, shortened engine longevity as well as discomfort to the rider. The goal is to maintain your engines oil temperature. The way to do this is to let your engine get up to to burn off the condensation in the crank cases. Then turn on the fan to drive the temperature down to 190 at that time the fan will turn off. As the temperature goes up to 210 the fan turns on to keep your engine cool. An oil cooler should be built to last, Made from top quality materials. UltraCool uses all stainless steel bolts and nylock nuts. The covers are a steel construction with an ABS plastic grill that can take the abuse from the rocks and debris from the road. The custom made oil filter adapter is machined from 6061 aluminum. The cooling fans are water resistant and dust proof and the thermal switch is rated at 100,000 cycles of service. Touring Models Fits FLH/FLT models (except for Trikes) chrome $ Fits FLH/FLT models (except for Trikes) black $ Fits FLH/FLT models (except for Trikes) chrome $ Fits FLH/FLT models (except for Trikes) black $ Fits Trike models, chrome $ Fits Trike models, black $ Fits Trike models, chrome $ Fits Trike models, black $ Dyna Models Fits FXD models, (non ABS) chrome $ Fits FXD models, (non ABS) black $ Softail Models Fits Softail models, chrome $ Fits Softail models, black $ TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

48 Custom Oil Tanks for Twin Cam 88 Softail Models These oil tanks are a perfect way to give your new Softail an old school look. Chromed steel construction with built-in battery box. There are two styles to choose from, and they fit all Softail models from Oil fittings not included Round $ Domed $ Bobber-Style Oil Tanks with Battery Box Here is a old school oil tank for your next bobber bike project. Chrome steel tanks with built-in battery boxes come with front rubber mount and tank cap included. They fit Big Twin rigid frames from and most custom rigid frames on the market today, also Softail models. Lines come out of the bottom of the tank for a nice clean look. Oil fittings not included Domed oil tank.... $ Chrome Round Oil Tanks for Softail Models by Santee Fits stock Softail frames and Santee Softail style frames. Available in a Round or Domed version with either a side or center fill with built in battery box. 3.5 Qts. Oil fittings not included. Round Oil Tanks Chrome Round side fill $ Chrome Round center fill $ Domed Oil Tank Chrome Domed center fill $ Chrome Oil Tanks for Softail Models by Santee Fits stock Softail frames and Santee Softail style frames. Winged version with either a side or center fill. Winged Oil Tanks Chrome Winged side fill $ Chrome Winged center fill $ Chrome Winged Oil Tanks for Twin Cam Softail Models by Santee Fits 00-Up Twin Cam Softails. Available with either a side or center fill spout. Replaces OEM # A. Does not utilize OEM dipstick. Oil plug is included. Winged Oil Tanks Chrome Winged side fill $ Standard Oil Tanks Fits 00-Up Twin Cam Softails. Replaces OEM # A Chrome side fill $ Oil Tank for Softail Models A perfect chrome replacement for the Original Equipment oil tank. Fits all Softail models from Replaces OEM A $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

49 APPAREL SEATS & BAGS Chrome Oil Tank for FXR Models A complete chrome oil tank assembly for all FXR models from (except 86-up FXR Super Glide models). Adds sensational style and simplifies oil draining through the addition of a second drain hole on the left rear of the tank. Included with the tank is a remote drain hose fitting kit which allows it to be drained from the kickstand side through a rubber hose which, when not in use, plugs onto a frame mounted dummy fitting which is included in the kit. Machine polished and then triple chrome-plated. Replaces OEMs , and Oil tank and remote drain kit (this tank has no oil level "sight" glass) $ Well-nuts blind fasteners (repl. OEM 8099) pack of $ Custom 3 qt. Barrel Style Oil Tanks by Santee These Chrome steel oil tanks were styled after the classic Barrel tanks on choppers from the 60 s and 70 s. They have a universal mounting system so they will fit just about anything and are available with or without a spin-on filter. Kits include 3 rubber mounts and tank cap. Oil fittings not included qt. round oil tank $ qt. round oil tank with spin-on filter $ FOOT HAND LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE Chrome Replacement Oil Tanks Duplicates of the Original Equipment oil talks finished in brilliant chrome Fits 4-speed FL and FX Big Twin models from (repl. OEM ) $ Fits 4-speed FL and FX Big Twin models from 65-E82 (repl. OEM A) $ Chrome Wrap-Around Oil Tank by Santee These 4 qt. oil tanks will fit rigid frames and swingarm frames with kickstart and steel primaries, but will NOT fit models with aluminum primaries or speed transmissions Chrome center fill oil tank $ Chrome side fill oil tank with spin-on oil filter $ GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Oil Tanks for XL Rigid Frames by Paughco This oil tank is for use with rigid Sportster frames manufactured by Paughco. Drain plug sold separately. Made in USA by Paughco Oil tank for use w/paughco XL rigid frames $ Oil tank drain plug $10.99 Custom Oil Tanks for FL/FX Models and Santee 4-speed Swingarm Frames 3.5 qt. chrome oil tanks for FL and FX 4-speed models, that provide easy access to the battery, and bolt to the stock mounts. They will also fit Santee 4-speed swingarm frames. Kits include oil tank and 2-pc. front mounting bracket for an easy installation Chrome side fill $ Chrome side fill with spin-on filter $ INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

50 Chrome 3-Quart Wrap-Around Oil Tank by Santee These 3-quart oil tanks use the small kickstart Sportster battery and fit rigid frames and swingarm frames with aluminum primaries and speed transmissions with steel primaries Chrome 3-quart side fill oil tank $ Chrome 3-quart center fill oil tank $ Chrome Oil Tanks for Sportster Models Great looking parts that add a bright splash of chrome to the right side of Sportster models. Accurate reproductions of the Original Equipment parts, they replace the stock black units perfectly. The ideal complement for our chrome ignition module and battery covers Fits Sportster models from (repl. OEM ).... $ Fits Sportster models from $ Custom Wrap-Around Oil Tanks for Big Twins by Santee 3.5 qt. custom wrap-around oil tanks. Available with or without spin-on oil filter and in either a side or center fill. When used with an FXE battery they ll fit rigid and swingarm frames, and will also clear speed transmissions. Includes oil line fittings. Side Fill Custom 3.5 qt. oil tank $ Custom 3.5 qt. oil tank with spin-on filter $ Chrome Oil Tank Cover for XL Models This chrome oil tank cover set is made of stamped steel and fits over the oil tank on Sportster models without disassembly Oil tank cover set, chrome fits XL models $ Wrap-Around Oil Tank for Electric Start Sportster Models This 3 1/2 quart oil tank will accept the stock FXE electric start battery. It also fits all stock electric start Sportster models, and is adaptable to many custom frames (on stock frames, the removal of the rear frame support struts may be required).comes complete with a cap, oil line fittings, and mounting hardware Chrome oil tank $ Oil Tank Mounting Kits For Softail Models Includes chrome front and rear brackets to mount oil tanks to most aftermarket and Original Equipment Softail frames Complete oil tank mounting kit $ Rear bracket only, chrome (replaces OEM )..... $ Front bracket only, chrome (replaces OEM )..... $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

51 27101 SHEETMETAL Cap Detail APPAREL SEATS & BAGS FOOT Chrome Oil Tank Dipsticks Chrome-plated replacements for Original Equipment dipsticks With short dipstick for Softail models from and Sportster models from (repl. OEM A) $ With long dipstick for FL models from 70-84, FX models from 71-85, FXR models from 82-83, FLT models from and XLCH models from (repl. OEM A) $ Skull Dipsticks These skull themed oil dipsticks are exact replacements for the OEM dipstick Skull dipstick for 00-Up Softail models $ Skull dipstick for Touring models $37.99 HAND LIGHTING ELECTRICAL EXHAUST INTAKE Oil Tank Plug Chrome-cap oil tank super plug for all Original Equipment side-fill oil tanks from and most custom tanks Replaces OEM T $5.99 ENGINE GASKETS Oil Temperature Dipstick for Late Sportsters Available with either a white face and black letters or a black face with white letters. Replaces the stock oil dipstick. Will not fit XR1200 models. Sold each Oil temperature dipstick 04- XL models, white face. $ Oil temperature dipstick 04- XL models, black face.. $49.99 TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Replacement Oil Tank Caps by Paughco Replacement oil tank caps for most side and center fill oil tanks. Made in the USA Chrome-plated 1 1/16-24 threaded cap for top fill oil tanks $ Chrome-plated push-in rubber filler plug for side fill oil tanks $ Chrome Oil Tank Plugs with Dipstick Chrome-plated replacement oil tank plugs with dipsticks. 939 Fits Dyna Glide models from (repl. OEMs A and A) $ Fits FLT, FLHT, FLHS and Road King models from (repl. OEMs and ) $22.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

52 Chrome Oil Filter Housing for Evolution Big Twins Models Replace that original equipment black or silver painted oil filter housing with a nice clean looking chrome aluminum die cast one. For custom slip-over steel braided or rubber oil line applications. Accepts all Harley style spin-on oil filters. Includes chrome oil line fittings Fits Evolution Big Twin models $35.99 Billet Oil Filter Mount by Pegasus Performance Machined from T6 aircraft aluminum, this oil filter mount bolts directly on your EVO style engine. The oil line holes have 1/8-27 NPT threads to accept either barbed fittings or stainless oil line fittings (sold separately) Billet EVO oil filter mount, polished $2.99 Aluminum Oil Tank Drain Valves Made from 6061 aluminum that has been heat-treated to T6. They permanently replace the stock drain plug and fit all stock or aftermarket oil tanks with 5/8"-18 threads for dramatically simpler oil changes. Attach a piece of 1/2" I.D. hose to the spigot and turn counter-clockwise with a wrench until oil flows into your catch pan. Natural finish. Sold each Oil Tank Drain Valve $31.99 Generator Oil Filter Adapter This adaptor allows you to install an oil filter in place of the generator on motors as well as our Pandemonium or S&S Shovelhead engines with generator/alternator bottoms. Use OEM A or equivalent aftermarket oil filter. Chrome finish Generator oil filter adapter $1.99 Chrome Oil Tank Cap Assembly For stock oil tanks on all 4-speed Big Twin models (except Softail models) thru 82 and 67-E78 Sportster models with electric start Replaces OEM TA $ Oil tank gasket (pack of 10) replaces OEM $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

53 APPAREL Spin-On Oil Filter Kit A high-tech replacement for your canistertype oil filters. It s approximately the same size as the stock unit and accepts CC #25250 chrome spin-on filter to eliminate leaks. Makes filter changes clean and easy. Comes with both threaded and slip-on fittings. Uses our mounting brackets sold separately Spin-on filter kit $ Chrome oil filter (replaces OEM # A) $8.99 Filter Not Included SEATS & BAGS FOOT HAND LIGHTING Oil Filter Kits Full flow automotive style spin-on oil filter kits. Each of these custom kits includes a chromed heavy-gauge steel bracket, chrome disposable oil filter, and all required hoses and clamps for installation Fits all Big Twins without front motor mounted rectifier/regulator (mounts on top of front motor mount) $ For all Sportster models (mounts to left front motor mount location) $ Fits frame tubes, excellent for custom applications $ Chrome oil filter (replaces OEM # A) $ Oil Filter Mounting Brackets Chrome steel brackets to mount accessory oil filters. Designed for use in conjunction with CC # s or oil filter kits. Available for rigid and swingarm 4-speed Big Twin frames from Fits rigid frames (repl. OEM ) $ Fits swingarm frames (repl. OEM A) $ Fits speed frames (except Softail models) $9.99 ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH Heavy-Duty Rubber Mounts Replacement rubber mount is used for mounting Harley battery boxes and oil tanks. Made of quality rubber with 1/4"-20 x 1/2" long threaded studs and steel plates. This mount also works great for mounting many custom parts. Replaces OEM Pack of Heavy-Duty Rubber Mounts $2.80 DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL Rubber Vibration Resistant Mounting Studs This is just the answer for custom builders. These studs are perfect for mounting gas and oil tanks. Sold in packs of 5 (unless otherwise noted) /4"-20 x 1/2" stud both ends $1.80 Filter Pac Custom oil filter and regulator mount designed to clean-up front lower mount area. Attaches to the front of the engine. Includes a chrome billet aluminum base plate, chrome hose fittings and a chrome oil filter. Utilizes stock regulator. Fits all Softail and 4-speed Big Twin models from Complete Filter Pack Kit $ Replacement chrome oil filter (replaces OEM ) $ Replacement Black Oil Filter (Replaces OEM ) $6.99 INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

54 Crimp Hose Clamps OEM style hose clamps. Note: Diameters listed are before crimping. Sold in packs of /32" (.531) diameter. Fits 1/4" I.D. reinforced rubber fuel line and vent hoses (repl. OEM 100) $ /32" (.594) diameter. Fits 5/16" I.D. rubber remote brake reservoir hose (repl. OEM 10038) $ /16" (.687) diameter. Fits 3/8" I.D. reinforced rubber oil and vent hoses (repl. OEM 10020A) $ /16" (.812) diameter. Fits all tank drain hoses (repl. OEM 10086) $0.32 Oil Line Retainers for Twin Cam Models Every time the oil lines are removed from the oil tank these retainers should be replaced in order to avoid any leakage Oil line retainers (pr) to engine OEM $ Oil line retainers (pr) to tank OEM $ Oil Line Fittings Chrome fittings used for oil tank, oil pump, oil coolers, carb fuel inlet, etc. Sold in 5 pack Straight fitting. 3/8" hose to 1/8" NPT. Replaces OEM $ Straight fitting. 5/16" hose to 1/8" NPT $ Straight fitting. 5/16" hose to 1/4" NPT $ fitting. 5/16" hose to 1/8" NPT. Replaces OEM $ Plug 1/8" NPT (repl. OEM ) $ Pipe plug, 1/4" NPT $ Original-Style Oil Pump Fittings Original-style fittings used with some custom oil tanks to convert nipples so stainless-steel braided lines may be used. Set of Fit nylon and braided hose $ Fit steel and braided fixed-end lines $ Chrome Oil Fitting 1/4 NPT x 90 and Hose Barb 1/4 NPT x 3/8 Oil line fittings and hose barbs to connect oil lines to Santee oil tanks (CCI# ) Oil line fitting /4 NPT x $7.49 Hose Barbs /4 NPT x 3/ $ Oil Line T-Piece and Fittings Brass T-piece with 3/8" spigot and chrome-plated oil line fittings with 1/8" NPT thread and 3/8" spigot. Sold each Brass T-piece $ Chrome hose fitting, 3/8" hose. (repl. OEM ) Sold each $ Elbow, $ *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

55 APPAREL SEATS & BAGS Custom Hose Clamps Fits over oil and fuel lines. Available with chrome or blue anodized finish. Sold in 6 packs Chrome. Fits 3/8" and 5/16" I.D. hoses (up to 5/8" O.D.) $ Blue. Fits 3/8" and 5/16" I.D. hoses (up to 5/8" O.D.) $ Chrome. Fits 1/4" I.D. hose (up to 1/2" O.D.) $ Blue. Fits 1/4" I.D. hose (up to 1/2" O.D.) $ Custom Hose Clamps These custom hose clamps feature a great look with reliable function. Under each custom hose cover is a weather resistant worm-drive hose clamp. Sold in packs of /8"-diameter. Slotted $ /4"-diameter. Slotted $ /8"-diameter. Grooved......$ /4"-diameter. Grooved......$24.99 Mini Hose Clamps Quality clamps for all 7/32" to 5/8" O.D. hose Card of $ Box of $ FOOT HAND LIGHTING ELECTRICAL Hose Separators Triple Hose Separator Available in plain or ball milled to match our other custom accessories, these die-cast hose separators will fit 3/8" or 5/16" I.D. rubber or stainless steel oil and fuel lines on Big Twin and Sportster models. Sold each Plain Price Ball Milled Price $ $7.49 Chrome $ $7.49 Polished $ $6.99 Blue $ $7.49 Black Keep lines neatly bundled with these separators fit 3/8" or 5/16" rubber or stainless steel hoses. Secures with flush sockethead screws Chrome $ Chrome ball milled $9.99 EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

56 25460 Oil Pressure Switch Quality replacement oil pressure switch for XL and K models and Big Twin (except Evo) Replaces OEM , sold each Oil pressure switch (repl. OEM ) $10.99 Oil Pressure Switch Wrench Avoid scratching or damaging your oil pressure switch during installation or removal with this handy two piece tool Oil pressure switch wrench....$ Accel Oil Pressure Switches American-made units with heavy-duty contacts, brass ferrule, thermoplastic insulator and a bright finish. Fits Sportster and K models from and Big Twins from (except Evolution models) Replaces OEM $15.99 Fits Sportster models from Replaces OEM $16.99 Fits Evolution Big Twin models from (except models with electric oil pressure gauge) Replaces OEM $ Oil Pressure Switches Replacement switch has heavy-duty contacts and thermoplastic insulator. Made in the USA. Fits FXD 99, Big Twin (except models with electric oil pressure gauges). 177 Oil pressure switch. Replaces OEM $ Twin Cam Oil Pressure Switch Oil pressure switch for all Twin Cam models and V-rod models 02-Up. Sold each Oil pressure switch (repl. OEM ) $5.99 Turn Your Stock Softail into a Slim & Stylish Bobber SEE DETAILS ON PAGE.02 Before Choose 1 of 3 Custom Tanks! Conversion tank frame adapter, rear fender, struts, and solo seat After Find your local Custom Chrome Dealer at *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.

57 APPAREL SEATS & BAGS 6004 FOOT 6048 HAND 6049 LIGHTING RevTech Custom Oil Lines Pre-assembled oil lines are perfect for custom applications. They feature chrome-plated steel fittings and -6 stainless steel braided hose pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ pre-assembled universal S/S braided oil line $ Replacement nut, 2-pack $ Replacement seals, 6-pack $ Hose to nipple adapter, 1/8 NPT male to -6 hose barb, sold each $3.99 Goodridge All Black 210 Oil Line Kits All black oil line kits for V-Twins. Featuring our premium black braided oil hose. Hose has outer fabric braided cover with stainless braided core, coated with a neoprene inner lining. Kits ship complete with black anodised hose clamps. 6004* 6 ft 210 Oil Line Kit $ ** 12ft 210 Oil Line Kit $ Black Braided Oil Hose, 6ft $ Black Braided Oil Hose, 12ft $ /8 Black Hose Finishers - 6 Pak $ /8 Black Hose Finishers - 10 Pak $47.99 *Contains 6 ft of 210 hose and 4ea Black Hose Finishers **Contains 12 ft of 210 hose and 8ea Black Hose Finishers ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANSMISSION & CLUTCH DRIVELINE WHEELS TIRES & BRAKES CHASSIS Goodridge Custom Stainless Steel Oil Line and Fittings Custom oil lines are made simple with Goodridge s new do-ityourself reusable oil line components. This new system utilizes the same chrome steel fittings Goodridge is known for, but in a userfriendly format that allows you to make your own kit. These ground breaking fittings are coupled with their stainless steel braided PTFE lined hose and can be used to assemble oil line kits for virtually any Big Twin on the road Ft roll 6 stainless Teflon hose $ Chrome oil tank stub fitting $ Chrome straight oil fitting 1/8 NPT $ Chrome 90 degree oil fitting 1/8 NPT $37.99 Stainless Steel Braided Hose Sold in 25 ft. rolls /4" ID x $ /16" ID x $ /8" ID x $99.99 SHEETMETAL INSTRUMENTS & GAUGES GENERAL CROSS REFERENCE

58 KEEP YOUR COOL EVEN IN STOP AND GO TRAFFIC UltraCool Oil Cooling Systems Stop Overheating in Stop-n-Go Traffic Excessive heat build up leads to loss of performance, shortened engine longevity and discomfort for the rider Powerful Dual 90 CFM Fans Built in thermal switch automatically turns fans on at 210 degrees to maintain engine temperature Top Quality Construction and Components All steel housing, 304 stainless braided oil lines, IP55 rated Fans, Solid aluminum custom oil adapter, 17 Row heat exchanger* SEE DETAILS ON PAGE.47 *Various model specific systems available - See fitment and part numbers on page *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity. Please see Cautionary Information in back of catalog.