Section 3A Lighting. Bulbs...7,10,11,14. Fender Lights Head Lights Indicator Lamps License Plate Frames...

Transcription

1 Section 3A Lighting Bulbs...7,10,11,14 Fender Lights...11 Head Lights Indicator Lamps... 9 License Plate Frames Marker Lights Seal Beams...6,10 Spotlamps Tail Lights Turn Signals Visor...6,9,16 For a More Complete Selection of Lighting See Master Catalogue Section 3. PRESTON CYCLE PRODUCTS INC. 3A-1

2 Headlights A B FLH Aluminum Head Lamp Housing & Parts Replaces left and right, on all FL s and 1983-on FLT. Available in chrome or polished (A) Chrome housing set ( T) (A) Polished housing set (B) Light unit w/halogen beam ( A) (B) Light unit w/seal beam (B) Light unit w/h-4 unit Complete FLH Head Lamp Cowl Assembly Item includes chrome or polished cowl set, top handlebar clamp cover, complete headlamp assembly with chrome rim and spot lamp, and signal lamp set. Includes installation hardware Chrome kit Polished kit V Spot lamp kit complete with signals Polished handlebar cover 3810 Chrome handlebar cover 7 Headlight Replacement Parts Fits FL with aluminum housing. # Screw, headlight mount (2662W) (10 pk) Rear bucket fits between housing and outer bulb retainer bucket ( ) Chrome rim ( A) Gasket ( A) (each) Lense body 1981-on (uses halogen bulb) ( A) prong socket only for h/lights ( ) Retaining ring for seal beam ( ) Seal beam rear bucket ( ) Adjuster screw ( ) (pair) Top spring FL, FLT 1960-on ( ) (10 pk) Side springs, lamp door ( ) (5 pk) Bottom spring ( ) (10 pk) Cast adapter ring, adjustable fork ( ) As above, polished FLH Head Lamp Cowl Kit Kit available in polished or chrome finish complete with rim and matching top handlebar clamp. As shown Chrome kit Polished kit Chrome 7 Headlight Cowl Kit Kit includes chrome ABS headlight housing, 7 H-4 lamp assembly with rim, upper fork covers and chrome fork air baffle. Fork covers can be installed without disassembly of forks. Fits FLT and FLHT A-2 PRESTON CYCLE PRODUCTS INC.

3 Headlights 7 Headlight Visor This custom chrome plated visor is just the right finishing touch for our Glide ( ) headlight unit. FORMED AS PICTURED! (shown) /2 for early fork head lamps 7 Headlight Assemblies Beautifully chrome-plated and fitted with either a bright 12- volt quartz halogen sealed beam, or standard 12-volt sealed beam lamp. The higher output and low voltage drain of the quartz lamp guarantees better visibility. Chrome mounting bracket included with light With 12V quartz halogen sealed beam With 6V standard sealed beam ( ) With 6V, FLH replica (stamped shell) 6149 With 12V standard sealed beam As above, black with chrome rim ( ) V w/std beam and beam indicator 5-3/4 Billet Lowered Spring Fork Headlight 12 Volt lamp is primarily for FXSTS models but can be used wherever 5-3/4 yoke mount lamps are used. Mounts 2-1/2 lower than typical bottom mount lamps Headlight Components BT Chrome 7 headlight shell ( ) Halogen seal beam (12V 65/35w) ( ) Std. seal beam (6V 50/40w) ( B) Std. seal beam (12V 60/50w) ( ) headlight inner ring ( ) headlight outer ring ( ) Lamp wiring connector ( ) Headlight bracket ( ) Bracket hardware kit ( ) Reflectors Adhesive Backed OEM type, DOT approved PCP Colour Type Fits Amber Pin Front fender FL ( ) (pair) Red Adhesive Rear fender 1972-on FX, FL ( ) (pair) Amber Pin Front bumber all FLT ( ) (pair) Red Adhesive Rear fender XL, FXR ( ) (pair) Red Adhesive Rear taillight bracket ( ) (each) FL Head Light Bracket Mounting Kit Complete kit includes mounting hardware, as required to mount head light bracket on PRESTON CYCLE PRODUCTS INC. 3A-3

4 Headlights FX-XL 5-3/4 Stock Headlight Headlight includes 12V sealed beam. Early style has 2 connections on back of shell. Late type replaces and has a rectangular hole in shell for wiring Black Black Chrome Stock FX-XL Head Lamp Shells Late type shell has square hole in back of shell for wiring. Early type has wire connections on back side of shell Early Shell models. ( ) 1338 Late Shell models ( ) Wagner 12 volt 30/30w 5-3/4 Sealed Beam included Early, complete ( ) As above, black 6676 Late, complete ( ) As above, black Chrome outer/inner door rim ( ) (pair) 5442 Rubber ring ( ) Tri-Bar Halogen Unit Features early styling with a replaceable H-4 bulb, designed to fit into any existing 7 or 5-3/4 light assembly beam with 60/55 bulb Bulb only for above 60/55 watt /4 beam with 60/55 bulb Bulb only for above 60/55 watt /2 spot lamp beam Rainbow Strobe Insert Allows lamp to radiate a soft, coloured light to alert drivers. For H-4 halogen bulbs (not included) Each 3A-4 PRESTON CYCLE PRODUCTS INC.

5 Headlights 6 Volt Chrome 7 Headlamp Lamp unit features oil and generator lamps, sockets, light rim and beam. Fits K and XL models Replaces Control Cable Wire Loom Clips Spring steel clips have a parkerized finish and are sold each. Parts book should be checked for proper fitment. PCP OEM Application Frame neck BT A Frame neck BT I.D. handlebar Bull neck frame BT Tailamp wiring-left upper frame tube BT A Centre post 1-1/4 BT and Rear frame (4 pk) Front frame leg generator wire 1-1/4 BT /8 I.D Timer cable Headlight for Early Springer Models A replica of the OEM headlamp used on most models from Just like the original. Available in all black painted finish with chrome bezel, or chrome plated. Restoration use or custom but will not fit Springer Softail models from late 1988-on. 832 Chrome 12-volt assembly ( C) 3558 Black 12-volt assembly ( B) Replacement Parts 3552 Headlight lens door (trim ring) with screw ( , ) Glass lense ( ) volt replacement bulb volt replacement bulb Spotlamp Bracket & Nuts Black spot lamp bracket ( ) Nuts (pair) Cycle Ray 6V Head Lamp Head lamp is an authentic replica with Guide and Cycle Ray logos on black housing and lens. Complete assembly includes: lens, chrome rim, reflector, OEM style riveting. U.S.A. made and assembled Complete black lamp Lens only ( ) Chrome Side Mount Headlight Bracket Fits on 35mm fork tubes (not FL Glide tubes). 826 Set PRESTON CYCLE PRODUCTS INC. 3A-5

6 Headlight Brackets Halogen Sealbeams Designed to outperform the standard, OEM quartz lamp used since 1982, this quartz-halogen sealed beam fits all 12-volt Harley models using 5-3/4 headlamps from 1965-on. Manufactured to provide OEM specifications for brightness and vibration resistance /4 50/35 Watt ( A) /35Watt ( ) Chrome FXWG Headlight Bracket Mounts bottom mount head lights on fork, also covers rough casting on lower tree. PCP Years 1357 Top 1980-E85 FXWG 4-Speeds ( ) Chrome Headlight Brackets PCP C/C Fitment /2 3/ FL /4 3/16 FX and XL extended front ends, lowers headlight for easier adjustment /4 3/16 Adapts to bottom clamp pinch bolts of most front ends /2 Stock FL and for converting to late model wide glide look on stock and custom bikes Bracket to mount headlights #6148 or #6149 to late model FXWG Chrome Headlight and Taillight Rims /4 Custom head lights /2 Spot lamp ( ) Light rim XL , FX inner 71-on ( )(pr) 5442* Rubber ring (for rims above) ( ) Headlight ring all FL s ( ) H/light ring & spring all FL s 1960-on ( A) Headlight rim FLT ( ) x 3/4 deep inner h/light door ( ) Inner headlight ring FL ( ) Inner headlight ring FL ( ) Taillight rim ( ) Tombstone taillight ( ) Springer spot lamp bezel ( ) *NOTE: Fits between two halves of #28425 XENON Boosted H-4 Bulb Bluish H-4 bulbs offer superior night visibilty. The xenon gas is used to cool the filament and allow the halogen process to produce a higher light output. The special blue coating increases the whiteness of the light with only a trace of blue /55W /55W Caution: Do not touch any halogen bulb with bare hands during installation or replacement. The manufacturer advises that the light unit not be washed with a water hose as it is not a sealed beam unit. 3A-6 PRESTON CYCLE PRODUCTS INC.

7 Spot Lamps Chrome Spot Lamps with Halogen For FL models /2 spot with 35W H /2 spot with 55W H3 Spot Lamp Kit for FL Models This 12 volt spotlamp assembly fits FL models Kit includes 2 spotlamp assemblies, chrome support bar and mounting clamps. Replaces OEM , , and Spotlamp kit (shown) As above non-fluted Mounting bar only Spotlamp clamps only Chrome end plugs for mounting bar (10 pack) Spot Lamp and Signal Light Kit FL Fluted Clear Early Spot Lamp Bulbs Single filament bulb. PCP Application V ( ) V ( ) V Spot Lamp Support Bars Chrome replacement spotlamp mounting bars (A) Fits FL 4 speed models ( ) (A) Hole plugs for above ( A) (pair) (B) Custom, FLST style spots to fit FLH width cowling (B) FXWG includes brackets which mount to lower pinch bolts Early Spot Light Brackets Chrome plated reproductions of the FL style (used without a fairing). Replaces OEM & Pair Chr. Spot Light Bracket Set Fits all XL and FX-FXE Spot Light Mounting Brackets Chrome plated brackets mount spotlamps to the front forks. Fit FL models from and BT , (pairs) PRESTON CYCLE PRODUCTS INC. 3A-7

8 Spot Lamps 6549 Chrome 12 volt late style Spotlight assembly. Fits FL (Seal beam not included) ( ) Fluted sealed beam ( ) Clear sealed beam ( ) 5499 Late spotlight rim ( ) Springer Spotlight Replaces for all Springer forks, 12 volt bulb type, style Chrome 12 volt early style HD spotlight. Comes with clear lens & 12 volt bulb. ( A) glides Replacement bulb 12-v Volt bulb ( ) Chrome spot rim Chrome 12 V Spot Lamp Assemblies Stock replacement spot lamp assemblies for OEM Fits FL and custom applications 1949-on. Sold each Clear, fluted, sealed beam Amber, fluted, sealed beam Clear, non-fluted, sealed beam Custom Driving Light 12 Volt Show chromed 4-1/2 driving light with heavy duty bottom mount. Complete unit with sealed beam and high beam indicator light. Sold each Complete light /2 seal beam Passing Lamp and Flasher Decal Fits FLH. Replaces Each Chrome Deco Spot Lamp Visor Visors have a beaded edge and are sold in pairs A-8 PRESTON CYCLE PRODUCTS INC.

9 Visor and Mounting Brackets Chrome Headlight Visor Covers Fits XL models 1960-on, FX and FXR models 1971-on with diecast headlight visors. Available with or without cutaway for indicator lights. With Cutaway 899 Plain ( T) 4635 Louvered ( T) Without Cutaway 900 Plain for models with indicator lights in speedo bracket (not for FXDWG) ( T) Chrome Diecast Headlight Mounting Brackets These heavy duty chrome diecast headlight brackets are available for most XL, FX, and FXR models through Two indicator holes (1/2 diam.). Fits FX, FXR, and XL models using 1/2 indicators. ( ) Note: When fitted to pre-1974 models indicator holes must be enlarged to 5/8 870 No indicator holes. Fits XL, FX, and FXR models without indicators. ( and ) Large indicator hole ( ) Headlight Visor Plugs Fits diecast headlight mounting visors Sold in 5 packs ( ) Indicator Decal (Each) Hole, neutral-oil pressure XL-FX 1973-on ( ) Headlight Visor Mount Bolts Use on all FX, XL, FXR narrow front ends 1959-on Acorn 5308 Cap 9783 Allen Red Indicator Lamps PCP Type Hi-Beam ( ) Red lense for above ( A) Gen ( ) Indicator Lamps Fit visors and dash for high beam, neutral and generator. PCP Type Application Colour Neutral FX-XL ( ) Green Oil FX-XL ( ) Red 1342 Hi beam FXS ( B) Red Speed nut 1/ (7614) (5 pk) Speed nut 1983-on ( ) (10 pk) PRESTON CYCLE PRODUCTS INC. 3A-9

10 Sealed Beams Round Seal Beams Use on stock Sportster headlights, FX models, our custom K.D. highlights and others using 7 seal beams. Sold each /4 6 V (30/30w) ( ) /4 12V (30/30w) ( ) V (50/40w) ( ) V (60/50w) ( ) Spot Lamp Bulbs Single filament seal beam type. Replace , in clear for stock OEM Spot lights 1964-up type. PCP Type Lense Volt Clear Volt Clear Volt Clear amber Volt Fluted amber Volt Clear fluted Volt Clear fluted ( ) 56105** 12 Volt Clear fluted dual beam *Recommended for show purposes only. **Fits PCP # /2 light. All others fit our #6549 and #56210 lights. Replacement Bulbs PCP Volt Application (10 packs except where noted) Brake & taillight (1154) ( ) Brake & taillight (1157) ( ) amber As above, clear As above but halogen (each) Directional (single) ( B) Directional (dual) ( ) Bullet lite (single) Bullet (dual filament) Speedo, FX, 1980-on FXWG, hi-beam ind on XL s 1965-on FL, speedo-tach 1965-on XL s, Speedo All FX s ( ) Hi-Beam ind XL s, 1983-on FLH, 1980-on FXWG, 1973-on All FX s ( A) Speedo-tach 1983-on XL s, 1984-on FXR, 1983-on FX s Hi-Beam ind on XL ( ) Turn signal ind on FXWG, FX, 1965-on FL ( ) Tachometer 1974-on all FX high-beam indicator Bates style headlamp ( ) Mini-guage Candlepower Halogen Headlights to Fit Harley These headlight units are special heavy duty units made for motorcycle use and made with (1) tab to fit the Harley with no problem. These are not standard automotive type units. Both units feature a 12-Volt 60/55 Watt replacement Bulb /4 Halogen unit /4 Halogen unit (heavy duty) Halogen unit Halogen unit (heavy duty) H-4 Quartz Bulb Halogen type fits 5-3/4 plus 7 units sold each. PCP Wattage (L-H) / / /55 (Heavy Duty) Caution: Do not touch any halogen bulb with bare hands during installation or replacement. The manufacturer advises that the light unit not be washed with a water hose as it is not a sealed beam unit. LED Tail Lamp Bulb Emits red light and replaces 1157 bulb A-10 PRESTON CYCLE PRODUCTS INC.

11 Fender Lights Front Fender Rail Light Kit Increase your visibility using our 12 volt amber running lights that mount to the front fender rail on FL and FLT 1973-on. Installation is quick and easy, just wire the kit to the stock fender tip light. Sold in pairs Lighted Fender Tips Replaces OEM items on 1979-on FLT in chrome plastic with lights installed Front fender light ( ) Front lens only ( ) Rear fender light ( ) Rear lense only ( ) Front fender tip grill FL Rear fender tip grill FL Front amber lense with blue dot Front Fender Lamp with Clear Lense 1949-on Universal Front Fender Light Die-cast, chrome and complete with mounting gasket, concealed mounting hardware and extra long wire leads Volt ( T) Indian Face Front Fender Lamps, 12V White lens Clear lens Early Fender Lights for Harley Front fender ( ) and Sidecar fender ( ) Volt, white lens Side Car Mud Flap Light Chrome with large clear lens and red small lens. Replaces Volt, BT Side Car Lazer LED Bulbs Features coloured LEDs with clear band for license plate. PCP Application on Tail-brake on Signal T/L Chrome Plastic Fender Tip Lens Grill Set Fits 1980-on FLT, FLHT, FLHS, and FLHR PRESTON CYCLE PRODUCTS INC. 3A-11

12 Taillights Tombstone 12V Taillight A diecast reproduction offered with plastic red lense, and universal mounting for most applications. Note: Not DOT approved and not recommended for use on motorcycles newer than Chrome 12 volt assembly ( C) As above, black ( B) 1290 Red plastic lens with gasket ( ) 4945 Red plastic lens with blue dot Red glass lens with gasket ( ) Clear top lens, glass ( ) Clear top lens, plastic ( ) Chrome lense rim ( ) 4967 Bulb, H-Duty amber (10 pk) Beehive Taillight (12V) A classy reproduction of the early Harley taillight. Universal fender mounting for most applications. Includes chrome license mount, black rubber mounting gasket and 12 volt bulb. Chrome or black finish housing. Not DOT approved. 799 Chrome complete taillight As above, black ( ) Red plastic lens Clear glass lens ( ) Red glass lens ( ) Beaded Edge Taillight Gaskets Molded from black rubber, these form fit taillight shell to fender for a vibration and water proof seal. USA made (each). PCP Application on FX-XL FL Taillight ( ) FX-FX FL Taillight ( ) Front fender lamp ( ) Tombstone ( ) Front fender and side car lamp ( ) Beehive ( ) Chrome Tombstone Taillight Grill This skull design grill replaces the stock lense rim. Note:This grill is for show use only Grill only Tombstone Taillight Kit for 1973-on Stock Fender New classy look for 1973-on FL style fenders. This kit includes our #798 chrome diecast taillight and a new custom mount base (with gasket & hardware) to place on the raised stamping of 1973-on rear taillights. Fits 1973-on style Big Twin rear fenders for FL,FLT,FLHT,FLHS models and XL Complete kit Mount base only Chrome Complete Tombstone LED Taillight Complete assembly includes a license plate mount bracket A-12 PRESTON CYCLE PRODUCTS INC.

13 Taillights Cateye Chrome Taillight -Universal Heavy-duty, almost vibration proof. 884 Classic 12-bolt Cateye taillight with red lens Complete LED assembly 4946 Cateye red lens with jewelled blue-dot lens 1265 Replacement standard red lens 1266 Replacement license plate white lens Chrome stamped grill Chrome stamped grill Gasket (10 pack) FX-FL-XL 1973-on Taillight PCP OEM Item Mount nuts (10 pack) A Complete light Lens gasket (each) Lens screws BT 1973-on, XL (10 pack) Lens only Beaded rubber base gasket (each) Base gasket to fender (10 pack) Clear bulb, 12 volt dual (10 pack Amber bulb, 12 volt (10 pk) Stylish Chrome Taillight Grills Eagle design Slotted cateye grill Slotted tombstone grill Round Stop Taillamp Round style taillamp like the one s used on early bobbers Stock Type Taillight PCP Item 1278 Chrome light, complete ( B) Fender light gasket ( ) Molded fender gasket ( BE) Rear lens gasket ( ) (10 pack) 801 Red plastic lens ( ) 4944 Blue dot red plastic lens ( ) 2210 Clear top lens ( A) 3856 Lens-rim-screws (kit) Top lens gasket ( ) (10 pack) Rear lens chrome rim ( ) 4967 Bulb, H-Duty amber (10 pk) Red glass lens ( ) Lense screws ( ) (10 pk) PRESTON CYCLE PRODUCTS INC. 3A-13

14 Taillights Cateye Taillight Mount Kit FXWG 1980-on Replica Sparto Taillight Lamps feature a red lens with a clear license plate window Polished Chrome Custom Taillight and License Mount Side mounts are universal fits right or left side. Heavy-duty steel, beautifully chromed Side mount taillight 4591 Fender mount taillight 2236 Taillight only 4358 Lens only for #2236 Taillight Brackets for Fat Bob Fenders These taillight brackets are reproductions of the OEM brackets fitting FXWGfrom 1980-on Black taillight bracket ( A) Chrome taillight bracket ( TA) Red Reflector (each) ( ) Red Brake 12 Volt LED Bulbs Bulbs are not affected by vibration for long lift. Available in 1157 (brake and taillight). Rotating type features LED s that rotate and reverse direction every two seconds and when brake light is activated the LED s pulse 2 times per second rotator 3A-14 PRESTON CYCLE PRODUCTS INC.

15 Taillights Light and Bracket Kit Chrome 3 piece license plate bracket and the early chrome taillight assembly Chrome Tombstone Taillight Includes skull rim lens grill, diecast chrome taillamp license plate bracket and chrome plated steel adapter plate which will mount to all BT and XL stock rear fenders. PCP Item Application Taillamp w/rim Custom Kit Skull Face Tombstone Lamp Features diecast construction with LED board. PCP Colour Red Clear Dresser Light Bar (lights not included) This custom light bar (use any 4 marker lights) is the ultimate way to light up the rear of your bike for safety and that dressed-up look. Wire it as a brake or running lights. Assembly includes bar, chrome backing plate to fit most license plate sizes Larger plates (8x4) without lights Light bar with 6 red bullet lights. Fits FL , FLT, FLHT ( ) Chrome License Plate Bracket Kit includes stock style 3 hole bracket assembly, license backing plate, frame and 4 krommetts PRESTON CYCLE PRODUCTS INC. 3A-15

16 Visors Chrome Light Visors Smartly designed and easy-to-install chrome visors 439 Fits 7 FLH headlight (each) ( T) headlight (each) 1420 Fits 5-3/4 headlight, XL-FX Bates (ea) ( T) FLH spotlight (pair) ( T) 438 1¾ Bullet light (10 pack) ( T) FL, XL rear taillight (each) ( T) FL turn signal (pair) ( T) FX-XL taillight, louvered 1973-on (each) Chrome Frenched Trim Rings Trim rings gives the headlight a recessed look and will not work with headlamp visors. Headlight Rings XL ( ) on except Road Glide and Tour Glides ( ) Spot Lamp & Turn Signal Rings Spotlight 1962-on ( B) (pair) 7 Headlight Visor This custom chrome plated visor is just the right finishing touch for our Glide ( ) headlight unit. FORMED AS PICTURED! Light sold separately (shown) /2 for early fork head lamps Taillight Covers / Visors 1973-on Chrome taillight covers feature a cut-out license plate illumination. Covers fit over the taillight on 1973-on models FX, XL, Smooth ( T) FX, XL, Louvered 4949 FXWG w/inverted light, smooth ( T) 3A-16 PRESTON CYCLE PRODUCTS INC.

17 License Plate Taillight Brackets for Fat Bob Fenders These taillight brackets are reproductions of the OEM brackets fitting FXWG from 1980-on Black taillight bracket ( ) Chrome taillight bracket ( TA) Red reflector (each) ( ) License Plate Bracket Chrome license plate bracket (mounting above taillight) as used on all Harley Sportster and Big Twin models 1955-on (except FXWG) Early 2 hole ( A) 703 Late 3 hole ( ) Red reflector (each) ( ) Taillight bracket pad, prevents scratching of rear fender (5 pack) ( ) Chrome License Plate Mounting Bracket Kit One-piece chromed diecast license plate mount replacing the stamped sheet metal license plate mount and bracket on the rear fender. Rubber spacers cushion the license plate from vibration, and allows the mount to follow the profile of the fender, for a cleaner look. Mounts directly to the stock hole pattern on all HD rear fenders 1955-on (except FXWG) Complete with hardware WideBob1 & 2 Custom Taillight Bracket We offer the WideBob1 or WideBob2 under fender taillight and license plate mounting brackets for custom applications. Extra wide slotted mounting holes allow many custom taillights to be installed. The WideBob1 bracket works best for FX/XL width rear fenders, such as #6025 while the wider WideBob2 custom bracket works best for FL/FXWG width rear fenders such as #6006. Lights not included WideBob1 bracket (6.5 wide, 3 hole) FX&XL 1231 WideBob2 bracket FXWG (7 wide, 2 hole) License Plate Mounting Kit 1813 Acorn style 3101 Cap style 9871 Custom flat allens 9872 Button allen License Plate Reflectors Reflectors measure 3/4 across the face and a 5/8 long stud with a tension spring and wing nut holds the plate firmly. Classic 50 s styling Blue (4 pack) Amber (4 pack) PRESTON CYCLE PRODUCTS INC. 3A-17

18 License Plate Chrome License Plate Frames These chrome diecast license plate frame features embossed eagle with Live to Ride (with black background). Mounting holes measure 5-7/8 x 2-3/4 centre-to-centre. The rear of the frame is recessed to accept a license plate of up to approximately 7 x 5. Fits all models (except FXWG). 7-1/4 x 4-1/4 standard size. PCP Finish Chrome Eagle-Spirit Gold inlay Eagle-Spirit Chrome Live to Ride Gold inlay Live to Ride Deluxe chrome Deluxe gold inlay Standard chrome Chrome skull Chrome backing plate 7-9/16 W x 4-1/2 H mounting holes 6-7/8 C/C 2-3/4 C/C Chrome Skull License Plate Frame License Plate Frame With Marker Lights Chrome frame features built-in vertical amber marker lights. Single filament bulbs can be wired as marker lights or turn signals. Measures 8-7/8 OAW x 4-1/4 H. Holes are 5-3/4 c/c and 2-3/4 c/c. Frame is recessed for 7-1/4 wide plates Chrome Eagle Spirit Lighted License Frame Chrome license plate frame includes a built-in red light for an extra measure of safety. Made from chrome plated heavy diecast metal. The central red light may be wired as an additional brake light or running lamp Chrome Chrome with gold plating Ontario Plate 3A-18 PRESTON CYCLE PRODUCTS INC.

19 Lens-Trim Chrome Slotted Turn Signal Trim Rings These trim rings are made from chrome-plated stamped steel and fit both OEM and aftermarket turn signals. They look great on plain lenses but look really nice when combined with jewelled blue dot lenses and taillight trim rings. Trim rings are easy to install and are available for most XL, FX and FXR models from Solid in pairs Early-style. Fits all XL, FX and FXR models (except FXRT) front and rear turn signals Chrome Slotted Turn Signal Trim Rings These trim rings are made from chrome-plated stamped steel. They fit all OEM and aftermarket turn signals and look really nice when combined with jewelled blue dot lenses and taillight trim rings. Two versions offered, the early and late model flat lenses fitted to the turn signal assemblies on most FL models Sold in pairs Early-style. Fits FLH and FLT/FLHTs Blue Dot Type Lens Lense with Blue Dot installed on Acrylic Tombstone 4946 Cateye 4942 XL-FX Signal (amber) (each) 4943 FL-FLH Signal FLH red (each) FL-FLH Signal FLH amber (each) Chrome Trim Rings and Taillight Grills 2932 Fits all models from 1973-on Blue Dot Grill Kits 3003 Fits all models from ot Trims Rings 3005 Fits all models from Blue Dots Blue dots with chrome rims 4500 Pair of blue dots 3479 Pair of gold dots Chrome Grill for Custom Tail Lights Chromed, stamped steel custom tail light grill comes ready to install custom taillight lens, with or without blue dot PRESTON CYCLE PRODUCTS INC. 3A-19

20 Turn Signals Custom 12V Accessory Lights 4972 Red (double contact) 4973 Amber (double contact) ( A) 4974 Replacement bulb (box of 10) 4975 Red replacement lens (each) ( ) 821 Amber replacement lens (each) ( ) 4943 Red lens with blue dot (each) Amber lens with blue dot (each) Complete Turn Signal Kits To make it easier for those of you who are builders, we ve gathered together all of the turn signal components you ll need under two versions. Both versions include the identical clamps and support hardware necessary to mount the turn signal housings to your handlebars and fender struts. Lamp units are the only difference. One version features early-model ( ) housings with amber lenses and single-filament bulbs Kit with early lamp units and single-filament bulbs FLH Turn Lamp Mounting Kit Chrome light mounting kit for turn signal lights 1968-on, complete with chrome base, clamp and mounting bolt. Necessary for mounting turn signal below spot lamp unit Kit ( ) Pair of clamps only Stand-off only ( ) Turn Signal Kits Includes 4 complete amber assemblies. Fits FLH Early-Style Amber Turn Signal Replacement turn signal units for FX, FXR and Sportster models from 1973-E84, with single filament. Each Unit with threads ( ) 4954 Unit, no threads ( A) 802 Amber lens only ( ) 803 Red lens only 4991 Red lens with blue dot Amber lens with blue dot FLH Turn Signal Complete assembly with lens and 12V bulb. Replaces OEM # Single contact, amber lens 4992 Single contact, red lens 4968 Replacement bulb ( B) (box of 10) 3A-20 PRESTON CYCLE PRODUCTS INC.

21 Turn Signal Turn Signal Relocation Kit for FXWG Relocates the rear turn signals further back to allow for saddlebags. Fits FXWG models Replaces OEM A Turn Signal Mounting Hardware A selection of chrome turn signal mounting components to fit most Harley models from 1973-on Handlebar clamp with screws ( , A) Rear support with screw ( ) Bracket between turn signal lamp and handlebar clamp ( ) Stud with spacer ( A) Lens Screws PCP Application (10 packs) All Twins taillight 1973-on ( ) FL Turn signals ( A) FX-XL Signals ( ) Turn Signal Relocation Kit for FXR, and XL Models Allows relocation of the rear turn signals further back to put on saddlebags. Fits XL models and FXR models Replaces OEM A. Note: required for proper turn signal fit when using our #3544 and #3614 saddlebag support kits PRESTON CYCLE PRODUCTS INC. 3A-21

22 Turn Signals Chrome Rear Directional Signal Mount Bars Formed and welded steel mount bars resist vibration FLH ( TB) As above, 4 shorter Turn Signal Mounts These parts stick out the furthest and break first, so we made them stronger. Chrome unless noted polished. PCP OAL Application C/C FLH ( B) 5-7/ As above ( ) 5-7/ / FLH ( ) 5-7/ FXRD ( B) 3-3/ / FXRD, FXR 3-11/ /8 Polished FLH ( ) 5-1/ /8 FLH ( ) 5-1/8 Chrome Short Rear Turn Signal Mounts Mounts allow turn signals to be moved in by 1-1/2 on each side. Fits FX, XL models Pair Bullet Light Mounting Kit This kit allows quick and easy installation of our custom bullet marker lights on most rear fender struts and Big Twins/XLs to 1987 with 35mm Narrow Glides front forks. Includes 4 chrome plated mounting blocks and the necessary hardware to install the bullet lights piece mounting kit Shortie Chrome Rear Turn Signal Mount Brackets Aluminum brackets that bring the signals closer to the fender for a cleaner look. Fits BT 4 speeds Brackets with no hardware 3A-22 PRESTON CYCLE PRODUCTS INC.

23 Turn Signal Toggle Switch This switch will handle 6 or 12-volts, up to 35 amps. Uses spade terminals and comes with an on/off face plate. It is most commonly used for spotlights on FL models from AMP ( ) Saddlebag Signals NOS stock FLT Sold each Front Turn Signal Handlebar Mounting Bracket Replaces OEM and Fits all 1973-on FX s and XL s with turn signals mounted on handlebars Turn Signal and Hazard Flashers Stock replacement flasher units for turn signals and hazard lights on all models from 1965-on Turn signal flasher, rectangular 12V 1965-on ( A) Hazard light flasher, round ( B) 3999 Mounting clip w/rivet 1973-on (9952) (5 pack) FLH Signal Brackets Front or rear use on FLH 1963-on, chrome plated, pairs ( B) 3480 Straight ( ) Turn Signal Parts, Available in 10 packs PCP Item Gasket ( ) 4968 Bulb, 12V single ( B) Screws ( ) FLH Turn Lamp Mounting Kit Chrome light mounting kit for turn signal lights, 1968-on, complete with chrome base, clamp and mounting bolt. Necessary for mounting turn signal below spot lamp unit Kit ( ) Pair of clamps only Stand-off only ( ) Chrome Turn Signal Trim Rings Chrome plated stamped steel and easy to fit on both the OEM and aftermarket turn signals. Pairs. (pairs) 3006 Early-style. Fits all XL, FX and FXR models (except FXRT) front and rear turn signals ( T) PRESTON CYCLE PRODUCTS INC. 3A-23

24 Marker Lights Note: These lights may be insufficient for good visibility. Recommended only for additional lighting to the OEM lights. Custom Bullet Marker Lights With Visor 815 Red light (single filament bulb) 3179 Amber light (single filament bulb) 3222 Red light (dual filament bulb) 3221 Amber light (dual filament bulb) Bomber Light Diecast Bullet style light with 3 fins, and visor built-in. (single filament bulbs) 4950 Red 4951 Amber Replacement Bulb 12V 4964 Dual filament (box of 10) 4965 Single filament (box of 10) Bullet Light Visors For 1-3/4 lights pack Bullet Lite with Stem-12V Can be utilized as signal, or as brake-signal with dual filament. Red lens Single filament 4965 Bulb (10 pack) 4953 Double filament 4964 Bulb (10 pack) Bullet Lights with Mounting Brackets (1 Wire) Classic styling of the red bullet marker light with a built-in chrome mounting bracket. A single filament bulb, either a left or right side mount Red light with right mount ( ) 4980 Red light with left mount ( ) Amber light with right side mount Amber light with left side mount 4965 Single filament bulbs 12V (box of 10) 816 Amber lense 817 Blue lense 818 Red lens Bullet Light Plastic Lens Only Available in different colours, these lenses will fit either standard bullet light or super Marker light. PCP Colour 816 Amber (each) 817 Blue (each) 818 Red (each) Dual Auxiliary Light Mount A universal chrome mounting bar that mounts on all rear license plate brackets. Perfect for mounting any two auxiliary bullet lights, taillights, brake lights or running lights Chrome Bullet Lamp Visor Chrome bullet lamp ring features a built in visor and will fit standard lamps. Pair A-24 PRESTON CYCLE PRODUCTS INC.