Found in this Section: LIGHTING 64 HANDLEBAR CONTROLS 65 FOOT CONTROLS 66 COVERS, TRIMS & ACCENTS 68 PERFORMANCE 70 KAWASAKI. for

Transcription

1 Found in this Section: LIGHTING 64 HANDLEBAR CONTROLS 65 FOOT CONTROLS 66 COVERS, TRIMS & ACCENTS 68 PERFORMANCE 70 find more accessories for your kawasaki in multi-fit KAWASAKI for

2 drink holders 105 performance covers, trims & Accents 68

3 VULCAN 900 for accessory mounts 102 handlebar 65 driving lights foot pegs 114 foot 66

4 Lightingconstellation DRIVING LIGHTS with turn signals Patent Pending With DOT approved H-3 bulbs in a 3 diameter stretched bullet housing that flows down to a coordinating 2-1/4 turn signal housing, these are the answer to exceptional front lighting. Mount directly to your forks with our Two-Piece Clamps. Wiring & adding a switch is simple with our Wiring Relay Kits (P/N s 2202 or sold separately, page 93). Fits: Universal Applications for Installation with Küryakyn Two-Piece Clamps (Sold Separately - below) 5009 Constellation Driving Lights with Turn Signals (set) Note: Turn signals have smoked lenses with amber bulbs. Note: Not intended for use with motorcycles that have OEM fork shrouds Note: For applications with OEM fork shrouds we suggest the Constellation Driving Light Bar (P/N bpg 91). Not for use with Küryakyn Windshields or Fairings. two-piece fork mounts Our sturdy chrome-plated mounts are just the ticket to attach Constellation Driving Lights, Silver Bullets or custom lights using 5/16 mounting hardware to fork tubes mm Two-Piece Fork Mounts (pr) Fits: Vulcan 900 Custom mm/58mm Two-Piece Fork Mounts for Inverted Forks (pr) Fits: Mean Streak 1600 replacement BULBS (p/n 5035, 2229, 2214 & 4813) CAN be found in the MULTI-FIT SECTION, PAgES 91 & Driving Light Bar P/N 4001 Constellation Driving Light Bar P/N 5001 Great Driving Light Bar Options! find these, and more lighting options in MULTI-FIT 91 Mounting Bracket P/N 4006 & P/N Upgrade to L.E.D. replace the bulbs in your DRIVINg lights with our 3 L.E.D. UPGRADE LAMPS (P/N 5035)

5 Handlebar Controls iso black iso transformer ISO -FLAME accessories for iso -GRIPS U.S. Patent D411,432 Combining great style & comfort, these grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO-Pads permit air movement for added comfort in hot weather. iso -flame grips Featuring a unique flamed pattern in the soft & cushy raised rubber pads & finished off with a Maltese Cross emblazoned end cap & smooth trim ring for that additional bad attitude. transformer grips U.S. Patent D631,725 Bright chrome grip bodies & sculpted end caps provide a solid feel while contrasting soft black rubber inlays absorb vibration. Interchangeable Widow, Zombie or Maltese Cross Emblems. Note: Transformer TM grips accept all grip end accessories except Accent Rings. Will only accept smooth accent rings for transformer grips (P/N 6364). Grip & Handlebar Accessories FIND them all IN MULTI-Fit 111 grip fitment KAWASAKI YR ISO BLACK ISO ISO Flame TRANSFORMER Vulcan Vulcan 1700 Voyager & Vaquero Vulcan Vulcan Vulcan 1500 ALL Mean Streak ALL Vulcan Vulcan UNIVERSAL 1 Handlebars ALL /8 Handlebars ALL N/A Note: Kuryakyn Grips are compatible with aftermarket internal bar-style heated grips. Not compatible with OEM heated grips where heat element is in the grip. wide style levers Wider & more comfortable than stock Vulcan 500 All ZL600 Eliminator Vulcan Vulcan Vulcan Vulcan 1500 (Including Mean Streak) Vulcan 1600 (Including Mean Streak) multi-fit audio lighting accessory mounts gauges & instruments handlebar foot covers, trims & accents luggage performance the shop > lighting & handlebar 65

6 Foot Controls photo shown is representative of product listed mounts directly to your floorboards! AdjUSTABLE adjustable cruise peg mounts for floorboards Add the comfort of cruise pegs & keep that clean simple style with our Adjustable Cruise Peg Mounts. These little beauties bolt directly onto your floorboards & allow full adjustability for optional foot positions. Add any of Küryakyn's Male Mount Pegs & ride on! 4579 Fits: All Vulcan 1600/2000 Models, All '09-'13 Vulcan 1700 Models & 1700 Voyager & Vaquero Models & all Vulcan 900 Classic with stock floorboards (pr) Note: Male Mount Pegs sold separately - starting on pg 114. Full Selection of Cruise Pegs Page shift & brake pedal pad covers A chrome & rubber clamshell cover that replaces the stock rubber pad on brake or heel shift pedals Shift & Brake Pedal Cover (ea) Fits: Vulcan 750 (Brake Pedal) Vulcan 1600 (Heel Shift) Vulcan 1500 (Heel Shift) Vulcan 900 Classic (Heel Shift) Vulcan 900 Custom (Brake Pedal) Vulcan 1700 Models (Heel Shift) Note: Shift position may need to be adjusted to accept P/N 4029 Heel Shift. Not for use with flamed floorboard covers (P/N 7025) 4045 Brake Pedal Cover (ea) Fits: Mean Streak Models round shift peg covers 8851 This round rubber-lined chrome shift peg is now offered in two sizes to accommodate almost any round shift peg Fits: Vulcan 1500 (Toe Only, Heel P/N 4029) Vulcan 1600 (Toe Only, Heel P/N 4029) Vulcan 2000 (Toe & Heel) Vulcan 900 Custom (Toe Only) Vulcan 900 Classic (Toe Only, Heel P/N 4029) Mean Streak (Toe Only) All Vulcan 1700, Voyager & Vaquero Models (Toe only, Heel P/N 4029 See 4029 Note) Universal: Most applications with round shift pegs approximately 2-9/16 long & 9/16 in diameter floorboard covers Simple to install with a huge impact Floorboard Covers for Kawasaki (pr) Fits: Vulcan 1600, Vulcan 2000, All '09-'13 Vulcan 1700 Models & '09-' Voyager & Vaquero Models, Vulcan 900 Classic with OEM floorboards brake pedal cover Rich chrome & black rubber finish encapsulates the existing pieces - a breeze to install! Fits: All Vulcan 1500 & Vulcan 1600 Classic Models ( Vulcan 1600 use P/N 8857) 8850 Brake Pedal Cover (ea) rendering shown

7 footpeg ADAPTERS Sold in Pairs Kuryakyn floorboards and foot pegs feature a two part mounting system allowing you to choose the right style for the right bike. Depending on the style you choose, each floorboard or foot peg will require either a splined or tapered adapter (sold in pairs). Throughout the book, floorboards and foot pegs are identified by a symbol next to each style indicating whether it requires a splined or tapered adapter. Use the chart below to determine the right adapter for your application. Select a Footpeg or Floorboard (pg 114) and Mount it with an Adapter! tapered splined year front rear front rear Vulcan '10 None 8831 None 8826 Vulcan 1700 Classic/LT/Vaquero '09-'13 None 8831 None 8826 Vulcan 1600 Classic None 8831 None 8826 Vulcan 1500 Classic None 8831 None 8826 Vulcan 1500 A/B Vulcan 1500 Drifter None 8831 None 8826 Vulcan 1500/1600 Mean Streak Vulcan 900 Classic None 8831 None 8826 Vulcan 900 Custom Vulcan 800 Classic Vulcan 800 Custom Note: Motorcycle specific adapters only work with stock OEM peg mounts accessories for brake pedal pads Replace your old stock pads with glistening chrome and high-quality soft rubber. Fits: Vulcan Vulcan 1600 Classic All Vulcan Vulcan 900 Classic All Vulcan 1700 All Voyager & Vaquero deluxe iso - brake pedal pad Installs easily using hidden fasteners for a flawless appearance Deluxe ISO Brake Pedal Pad Note: Requires drilling a 1/4 hold in brake pad. iso - brake pedal pad Simply drill one hole in your existing rear brake pedal ISO -Brake Pedal Pad 8082 Replacement Rubber Pads (set/3) multi-fit audio lighting accessory mounts gauges & instruments handlebar foot Note: Requires ability to drill a 3/8 bolt hole in center of brake pedal. FLAMIN brake pedal pad All rubber components physically retained - no more glued on pads Flamin Brake Pedal Pad Note: Requires ability to drill a 3/8" bolt hole in center of brake pedal covers, trims & accents luggage performance the shop > foot 67

8 Covers, Trims & Accents handlebar control covers U.S. Patent D556,645 & D575,203 may apply Cover up unsightly housings & create a smooth, full-custom look with these clamshell-design chrome covers. They install easily & encapsulate the stock housings without interfering with control functions. sold as sets 9112 Fits: All Vulcan 2000, all Vulcan 900 & Mean Streak 9117 Fits: Vulcan 1500, all Vulcan 1600 caliper cover This wicked looking cover installs in minutes. No tools required. clutch perch cover 9108 Fits: All Vulcan 900 & 2000 Models 1294 Fits: All Vulcan 900/1500/ marquis choke knob cover 2009 U.S. Patent 5,836,214 & D418, Installs easily without removing or modifying the stock choke knob. Fits: Vulcan 800/1500/ Marquis Choke Knob Cover (ea) 2017 clutch cable adjuster cover Hide the crude, zinc-plated cable adjuster! Installs with easy-to-handle spring clips Fits: All Kawasaki 800 Vulcan (ea) 2023 Replacement Spring Clips for P/N 2017 (pr) rear brake component DRESS-up kit A replacement fluid reservoir cap in a dazzling chrome finish Fits: '02-'08 Mean Streak, '03-' Classic & Nomad, '11-'13 Vaquero 1700 (ea) clutch master cylinder cover 1743 Fits: All Vulcan 1600 Models & Mean Streak (ea) Brake master cylinder cover 7813 Fits: All Vulcan 2000, all Vulcan 900, Vulcan 1600 Models & Mean Streak (ea)

9 9253 new brighter, FULL LICENSE plate ILLUMINATION! 9252 UNLIT / Lit Taillight can be installed on top or bottom! accessories for 1 L.E.D. curved side MOuNT license holders In the past, if you wanted a cool, custom side-mount license plate you paid through the nose. Our product brings the price down to reality without compromising style & function. Choose your plate then the correct Mounting Clamps. Sized to fit 4 x 7 plates only. LICENSE holders 9253 Chrome Curved Horizontal Side Mount (ea) 9251 Chrome Curved Vertical Side Mount (ea) 9252 Chrome Lighted Curved Vertical Side Mount with Taillight (ea) 3125 Gloss Black Curved Horizontal Side Mount (ea) Note: Not intended for use with saddlebags. Please check local laws regarding side mount license plates before ordering. Mount Clamps required for installation - Sold separately mount clamps Required for installation of Küryakyn Side Mount License Holders Chrome Mount Clamp (ea) Fits: All Kawasaki Vulcan 900 Models & All Vulcan 2000 Models 3122 Gloss Black Mount Clamp (ea) Fits: All Kawasaki Vulcan 900 Models & All Vulcan 2000 Models Compliant with FMVSS# & marked SAE DOT L 11 multi-fit rear caliper cover Installation is simple & quick with high strength peel-&-stick adhesive. Fits: All Vulcan 900 Models, all Vulcan 1600 Models, all Vulcan 2000 Models, all Vulcan 1600 Mean Streak, all Vulcan 1500, & all '09-'13 Vulcan 1700 Classic 1283 Rear Caliper Cover (ea) Installs in MINUTES! THE SCOOP air box cover Gain extreme visual speed & horsepower with this direct replacement cover! The long speed lines combined with the illusion of a ram air scoop will certainly intensify any ride. Installation is a snap. Fits: All Vulcan 900 Models 9961 The Scoop Air Box Cover (ea) audio lighting accessory mounts gauges & instruments handlebar foot covers, trims & accents luggage performance the shop > covers, trims & accents 69

10 Performance air cleaners alley cat air cleaner Great looks and outstanding performance, the Alley Cat is sure to turn heads. Everything you need, all in one kit, to turn your bike into a high performance showpiece. Features include a lifetime high flow Kuryakyn designed K&N air filter element combined with a state of the art backing plate to extract the maximum potential from your engine Fits: Vulcan Fits: Vulcan 1700, Voyager & Vaquero SELECT perfect the air cleaner for your bike! U.S. Patent 5,307,771 may apply Pro-series hypercharger STANDARD hypercharger 95-'04 Vulcan 1500 (Single Carb Model) All Fuel Injected Vulcan 1500/1600, Including Mean Streak '06 VN Don t forget... A Wild Things TM Fuel Injector Controller (P/N 9218) will help you fit it all together! FIND it in MULTI-FIT, page 155! Pro-R Hypercharger Corsair Vulcan Note: These kits contain an all-chrome air cleaner, mounting kit, & jetting necessary for carburetor models for a complete, sanitary installation. For optimum performance & driveability on fuel injected motorcycles, we strongly recommend use of the Wild Things Fuel Injection Controller (P/N pg 155)