38999 Series II Series. Applications. Features. Series II
|
|
- Clifton Harrington
- 6 years ago
- Views:
Transcription
1 Applicaions High Performance Miliary Aircraf Commercial Airlines Communicaions Equipmen Series II MIL-DTL Series II connecors offer high densiy conac arrangemens in a low profile miniaure circular shell. Series II connecors were designed for use in avionics and miliary vehicles where more and more elecronics sysems are being packed in o he same physical space leaving less available for inerconnec devices. Series II feaures include a very small area for maing he connecors, oal environmenal sealing, wide operaing emperaure range (-65 C o 200 C), exremely ligh weigh connecor design, quick maing hree-poin bayone coupling, a wide range of recepacle syles, and available in a ruggedized 500-hour sal spray plaing. Missiles Sophisicaed Tes Equipmen Shipboard Series Series II Feaures High Reliabiliy MIL-DTL Series II - syle connecors are used in performance aircraf ha demand reliable connecions in some of he mos rigorous environmens. The connecors mus perform flawlessly under wide emperaure ranges, high vibraions, and be resisan o a vas array of conaminans. Low Profile Connecor Design Series II require a fracion of he space needed o mae mos of he oher high performance connecors. This allows inerconnecs o be locaed in areas ha would be impossible for oher maing sysems. Ligh Weigh Today s aircraf designs require connecors ha are very ligh weigh. Saving weigh on he connecor sysems allows he aircraf o carry more fuel, maximizing is range or payload carrying capaciy. High Densiy Connecors Series II connecors offer up o 128 conacs per connecor. Ideally suied for he demands of oday s digial elecronics ha are used on fly-by-wire aircraf, advanced roboics, and criical indusrial equipmen. Operaes a Exreme Temperaures These connecors will operae in emperaures from -65 C up o 200 C (-85 F up o 392 F) Quick Maing Coupling Sysems Three poin bayone coupling nus provide fas, one-hird of a urn connecor maing. Maing is easily verified wih an audible and acile click and a bayone pin sighing hole locaed in he coupling nu. For Assisance in Europe Please See he Back Cover For a Complee Lising of Our Branch Offices and Conac Numbers. Specificaions subjec o change. 189
2 38999 Series Series II Series II STEP 1 Selec Shell Syle Recepacle or Plug Recepacle MS27472T MS27497T + MS27474T + maes wih Sandard Plug MS27473T + Fron moun wih rear accessory hreads. Rear moun wih rear accessory hreads. Jam Nu wih rear accessory hreads. Boo opions SB Sraigh Boo Expanded Recovered HST Hea Shrink Tubing Expanded Recovered CSB Convolued Shrink Boo Expanded Recovered BSB/HBSB Bole Shaped Shrink Boo (High Raio Bole Shaped Boo) Hea Shrink Produc CSB2 CSB3 CSB4 CSB5 BSB1 HBSB2 BSB2 BSB3 BSB4 BSB5 Expanded ID inch (mm) (17.8) (26.9) (36.6) (45.7) (23.9) (8.9) (30.0) (31.0) (36.1) (42.9) Recovered ID inch (mm) (8.1) (12.7) (17.5) (22.4) (6.1) (3.6) (6.1) (7.1) (8.4) (9.9) Lengh Max inch (mm) (133.4) (146.1) (158.8) (171.5) (38.1) (55.1) (55.1) (67.1) (80.0) (99.1) 8 u 10 u u u u 12 u u u u u 14 u u u u u u 16 u u u u u 18 u u u u u 20 u u u u 22 u u u 24 u u u Shell Size Mos Popular Hea Shrink SB SB SB SB SB HST HST HST HST Produc Expanded ID inch (mm) (22.4) (25.7) (29.5) (34.3) (37.3) (19.1) (25.4) (31.8) (39.9) Recovered ID inch (mm) (6.4) (7.4) (8.4) (9.7) (10.4) (6.4) (8.1) (10.6) (13.0) Lengh Max inch (mm) (105.9) (121.2) (138.7) (159.5) (177.8) (152.4) 8 u u 10 u u u 12 u u u 14 u u 16 u u u 18 u u 20 u u 22 u u 24 u Shell Size Spring Shielding Tape STEP 6 Choose Endbell Poed (Preferred) U = Unshielded US = wih shielding spring UT = wih shielding ape wih shielding ape & spring UW = STEP 7 Choose Hea Shrink Boo or Tubing RU Righ Angle Call for more info Noe: Cable ouside diameer mus be beween expanded and recovered dimensions. adhesive lined hea shrink ubing 190 EMI Plug MS27484T + Mos Popular Expanded Recovered RSB Righ Angle Shrink Boo Expanded Recovered Hea Shrink Produc RSB1 RSB2 RSB3 RSB4 RSB5 Expanded ID inch (mm) (22.4) (25.7) (29.5) (34.3) (37.3) Recovered ID inch (mm) (5.8) (6.6) (7.6) (8.9) (9.4) Lengh Max inch (mm) (105.2) (124.0) (146.3) (172.2) (185.2) 8 u 10 u u 12 u u 14 u 16 u u 18 u 20 u 22 u u 24 u Shell Size In Norh America: Pricing Delivery: Tech Suppor: Specificaions subjec o change.
3 Shell Size Shell Size CG = Sraigh Adaper Endbell OR OR Unshielded Conduis CA* = condui adaper for plasic flexible condui. Add size code i.e. CGCA10 Noe: Normal recommended condui fill is 40% of Condui ID or less. Shielded Cord Grip Size Code Min Max Min Max Min Max Min Max MSS* mm mm mm mm mm mm mm mm Unshielded Cord Grip Size Code Size Code A R Min Max Min Max Min Max Min Max Min Max PF* PS* MS* mm mm mm mm PL* ML* mm mm mm mm mm mm Example of par descripion: 1 Shell Syle 2A Shell Size* STEP 6 Choose Endbell 3 Plaing *See Connecor Soluions Guide RG = Righ Angle Adaper Endbell STEP 7 Choose Wire Proecion CA* Condui ID Inch (mm) (6.5) (10.0) (12.0) (14.3) (16.5) (23.0) Condui OD Inch (mm) (10.0) (13.0) (15.8) (18.5) (21.2) (28.5) 8 u u 10 u u 12 u u u 14 u u u u u 16 u u u u 18 u u u u 20 R R u 22 R R u 24 R R u R= wih reducer Shell Size 4 Conac 5 Roaion (omi for normal) 6 Endbell Series II For Assisance in Europe Please See he Back Cover For a Complee Lising of Our Branch Offices and Conac Numbers. Specificaions subjec o change. MS27473T 24 F 35 P -UT BSB5 2B Connecor Layou* Please call for more informaion Condui Adaper and Cord Grip Types CA*= Condui Adaper MSS*= Meal Shor Shielded - Nickel Plaed Brass PF*= Plasic wih Flex Spring PS*= Plasic Shor MS*= Meal Shor - Nickel Plaed Brass PL*= Plasic Long ML*= Meal Long - Nickel Plaed Brass *= add size code per char i.e. CGPFA or CGMSS4 Min/Max refers o cable diameer. Noe: Cable jacke and shield diameers mus be beween Min/Max of cord grip. For deailed info on shield diameers, see MSS able on page 232. Soluions Guides STEP 3 Choose Connecor Plaing B = Olive Drab Chromae over Cadmium over Elecroless Nickel (-65 C o 175 C) -85 F o 347 F F = Elecroless Nickel (-65 C o 200 C) -85 F o 392 F A = C = 7 Wire Proecion STEP 2A Choose Shell Size STEP 2B Choose Connecor Layou See Connecor Clear Chromae over Cadmium over Elecroless Nickel (-65 C o 150 C) (inacive) -85 F o 302 F Anodic Coaing F (-65 C o 200 C) -85 F o 392 F STEP 4 Choose Conac P = Pin S = Socke A = Less Pin Conacs B = Less Socke Conacs A or B is used only for special conac ypes (PC Pin, Thermocouple, Fiberopic). STEP 5 Choose Alernae Shell Posiion (omi for normal) A = Nex Mos Popular B = Limied Availabiliy C = Check for Availabiliy D = Check for Availabiliy See Connecor Soluions Guide Go o STEP 6 Noe: F Endbells U & CG will be Black Anodized. Endbells U & CG will be Elecroless Nickel Plaed Series Series II 191
4 38999 Series Series II Series II Dimensions Flange Recepacle MS27472 MS27497 Blue Band indicaes Rear Release Conac Reenion Sysem. C Rear Thread Overall Lengh L Max B (.00) (-.13) UNEF-2A Shell A Diameer MS27472 ( ) F Max S (TP) H (.26) Size Max MS27472 MS27497 MS27472 MS27497 MS27497 J Max (-.13) / (12.04) (19.86) (21.29) (8.18) (11.35) (1.47) (21.03) (15.09) (3.05) / (15.01) (19.86) (21.29) (8.18) (11.35) (1.47) (24.23) (18.26) (3.05) / (19.08) (19.86) (21.29) (8.18) (11.35) (1.47) (26.59) (20.62) (3.05) / (22.25) (19.86) (21.29) (8.18) (11.35) (1.47) (28.98) (23.01) (3.05) / (25.42) (19.86) (21.29) (8.18) (11.35) (1.47) (31.34) (24.61) (3.05) / (28.60) (19.86) (21.29) (8.18) (11.35) (1.47) (33.73) (26.97) (3.05) / (31.77) (19.86) (21.29) (8.18) (11.35) (1.47) (36.91) (29.36) (3.05) / (34.95) (19.86) (21.29) (8.18) (11.35) (1.47) (40.08) (31.75) (3.05) / (38.13) (21.85) (23.27) (8.18) (11.35) (1.47) (43.26) (34.93) (3.73) 192 All dimensions in inches (millimeers in parenhesis) In Norh America: Pricing Delivery: Tech Suppor: Specificaions subjec o change.
5 D ±.003 (0.08) 125 L Dimensions Series II Shell Size D LF Max K Max Z Cable Min* BB Max JJ Max C Code B (18.8) (44.2) (11.0) (7.2) (9.9) (12.3) B (18.8) (46.0) (11.0) (8.6) (12.5) (14.9) C (22.0) (46.2) (12.1) (12.9) (16.9) (19.9) D (25.1) (49.3) (12.1) (14.3) (18.9) (21.9) E (29.1) (50.8) (12.1) (15.7) (20.9) (23.9) F (32.3) (53.3) (12.1) (17.1) (22.6) (25.6) G (36.3) (51.3) (12.1) (18.6) (24.2) (27.2) H (39.4) (53.8) (12.1) (21.4) (27.8) (30.8) H (39.4) (57.2) (12.1) (22.86) (29.4) (32.4) K Universal Hea Shrink Z BB JJ Series Series II 125 D ±.003 (0.08) Z BBJJ L K UNAC-PG Cord Grip Shell Size D LF Max K Max Z Cable Min* BB Max C Code B (18.8) (37.8) (3.0) (8.38) (14.8) C (22.0) (37.8) (3.0) (11.18) (18.0) D (25.1) (37.3) (3.0) (13.97) (21.2) D (25.1) (37.8) (3.0) (16.56) (22.6) E (29.1) (37.8) (3.0) (19.10) (25.1) F (32.3) (40.9) (3.0) (19.10) (28.3) G (36.3) (41.9) (3.0) (24.10) (32.3) H (39.4) (44.7) (3.0) (24.10) (35.4) H (39.4) (48.8) (3.0) (24.10) (35.4) L F is he maximum reference lengh from he maing face of he connecor * Recommended cable maximum is 90% of acual endbell I.D. All dimensions in inches (millimeers in parenhesis) For Assisance in Europe Please See he Back Cover For a Complee Lising of Our Branch Offices and Conac Numbers. Specificaions subjec o change. 193
6 38999 Series Series II Series II Dimensions Jam Nu Panel MS27474 Shell A Diameer Overall Lengh L Max. U Jam Nu V Jam Nu C Rear Size Max B +/-.005 (.13) Class T Flas Max. S Dia Max Thread 2A Thread UNEF-2A /8-20UNEF 7/16-28 (12.0) (11.13) (19.86) (43.4) (35.1) UNEF 9/16-24 (15.0) (11.13) (19.86) (30.6) (38.3) /8-18UNEF 11/16-24 (19.1) (11.13) (19.86) (33.8) (41.4) /4-18UNEF 13/16-20 (22.3) (11.13) (19.86) (37.0) (44.6) /8-18UNEF 15/16-20 (25.4) (11.13) (19.86) (40.1) (49.4) /2-18UNEF 1-1/16-18 (28.6) (11.13) (19.86) (43.3) (51.4) /8-18UNEF 1-3/16-18 (31.8) (11.79) (19.71) (46.5) (54.5) /4-18UNS 1-5/16-18 (35.0) (11.79) (19.71) (51.2) (57.7) /8-16UN 1-7/16-18 (38.1) (11.79) (21.31) (54.4) (60.9) 194 All dimensions in inches (millimeers in parenhesis) In Norh America: Pricing Delivery: Tech Suppor: Specificaions subjec o change.
7 D ±.003 (0.08) 125 L Dimensions Series II Shell Size D LF Max K Max Z Cable Min* BB Max JJ Max Code C B (18.8) (44.2) (11.0) (7.2) (9.9) (12.3) B (18.8) (46.0) (11.0) (8.6) (12.5) (14.9) C (22.0) (46.2) (12.1) (12.9) (16.9) (19.9) D (25.1) (49.3) (12.1) (14.3) (18.9) (21.9) E (29.1) (50.8) (12.1) (15.7) (20.9) (23.9) F (32.3) (50.8) (12.1) (17.1) (22.6) (25.6) G (36.3) (51.1) (12.1) (18.6) (24.2) (27.2) H (39.4) (53.8) (12.1) (21.4) (27.8) (30.8) H (39.4) (56.6) (12.1) (22.86) (29.4) (32.4) K Universal Hea Shrink Z BB JJ Series Series II 125 D ±.003 (0.08) Z BBJJ L K UNAC-PG Cord Grip Shell Size D LF Max K Max Z Cable Max* BB Max Code C B (18.8) (37.8) (3.0) (9.5) (14.8) C (22.0) (37.8) (3.0) (10.5) (18.0) D (25.1) (37.3) (3.0) (13.0) (21.2) D (25.1) (37.8) (3.0) (14.0) (22.6) E (29.1) (37.8) (3.0) (18.0) (25.1) F (32.3) (40.9) (3.0) (18.0) (28.3) G (36.3) (41.9) (3.0) (25.0) (32.3) H (39.4) (44.7) (3.0) (25.0) (35.4) H (39.4) (48.3) (3.0) (25.0) (35.4) L F is he maximum reference lengh from he maing face of he connecor * Recommended cable maximum is 90% of acual endbell I.D. All dimensions in inches (millimeers in parenhesis) For Assisance in Europe Please See he Back Cover For a Complee Lising of Our Branch Offices and Conac Numbers. Specificaions subjec o change. 195
8 38999 Series Series II Series II - Dimensions Plugs MS27473 MS27484 Shell A Diameer Overall Lengh L Max C Rear Thread Size Max T Class UNEF-2A /16-28 (19.05) (19.46) /16-24 (21.82) (19.46) /16/24 (26.19) (19.46) /16-20 (29.36) (19.46) /16-20 (32.54) (19.46)) /16-18 (35.71) (19.46) /16-18 (38.89) (19.46) /16-18 (41.68) (19.46) /16-18 (44.86) (19.46) 196 All dimensions in inches (millimeers in parenhesis) In Norh America: Pricing Delivery: Tech Suppor: Specificaions subjec o change.
9 D ±.003 (0.08) 125 L Dimensions Series II Shell Size D LF Max K Max Z Cable Min* BB Max JJ Max Code C B (18.8) (43.7) (11.0) (7.2) (9.9) (12.3) B (18.8) (45.5) (11.0) (8.6) (12.5) (14.9) C (22.0) (45.7) (12.1) (12.9) (16.9) (19.9) D (25.1) (48.8) (12.1) (14.3) (18.9) (21.9) E (29.1) (50.3) (12.1) (15.7) (20.9) (23.9) F (32.3) (50.3) (12.1) (17.1) (22.6) (25.6) G (36.3) (50.8) (12.1) (18.6) (24.2) (27.2) H (39.4) (53.3) (12.1) (21.4) (27.8) (30.8) H (39.4) (56.4) (12.1) (22.86) (29.4) (32.4) K Universal Hea Shrink Z BB JJ Series Series II 125 D ±.003 (0.08) Z BBJJ L K UNAC-PG Cord Grip Shell Size D LF Max K Max Z Cable Max* BB Max Code C B (18.8) (37.8) (3.0) (9.5) (14.8) C (22.0) (37.8) (3.0) (10.5) (18.0) D (25.1) (37.3) (3.0) (13.0) (21.2) D (25.1) (37.8) (3.0) (14.0) (22.6) E (29.1) (37.8) (3.0) (18.0) (25.1) F (32.3) (40.9) (3.0) (18.0) (28.3) G (36.3) (41.9) (3.0) (25.0) (32.3) H (39.4) (44.7) (3.0) (25.0) (35.4) H (39.4) (48.3) (3.0) (25.0) (35.4) L F is he maximum reference lengh from he maing face of he connecor * Recommended cable maximum is 90% of acual endbell I.D. All dimensions in inches (millimeers in parenhesis) For Assisance in Europe Please See he Back Cover For a Complee Lising of Our Branch Offices and Conac Numbers. Specificaions subjec o change. 197
10 38999 Series Series II Series II Conacs Pins Conac Wire Size Pin Wire Srip Wire Hole Size AWG Conac Color Bands Lenghs Wire Range Filler Color Par Number Min Max 22D M39029/ Orange Blue Black.125 (3.18).030 (0.76).054 (1.37) MS Black *22M M39029/ Orange Blue Brown.125 (3.18).030 (0.76).050 (1.27) MS Black * M39029/ Orange Blue Red.125 (3.18).034 (0.86).060 (1.52) MS Black M39029/ Orange Blue Orange.188 (4.77).040 (1.02).083 (2.11) MS Red M39029/ Orange Blue Yellow.188 (4.77).065 (1.65).109 (2.77) MS Blue M39029/ Orange Blue Green.188 (4.77).097 (2.46).142 (3.61) MS Yellow 8 Coax (3.43).155 (3.94) MS For Coax and Fiber Opic (MIL-T-29504/4) conacs, call. * Inacive for new designs Sockes Head goes in firs, rim excess Conac Wire Size Socke Wire Srip Wire Hole Size AWG Conac Color Bands Lenghs Wire Range Filler Color Par Number Min Max 22D M39029/ Orange Green Yellow.125 (3.18).030 (0.76).054 (1.37) MS Black *22M M39029/ Orange Green Green.125 (3.18).030 (0.76).050 (1.27) MS Black * M39029/ Orange Green Blue.125 (3.18).034 (0.86).060 (1.52) MS Black M39029/ Orange Green Viole.188 (4.77).040 (1.02).083 (2.11) MS Red M39029/ Orange Green Gray.188 (4.77).065 (1.65).109 (2.77) MS Blue M39029/ Orange Green Whie.188 (4.77).097 (2.46).142 (3.61) MS Yellow 8 Coax (3.43).155 (3.94) MS For Coax and Fiber Opic (MIL-T-29504/4) conacs, call. * Inacive for new designs Conac Color Codes Head goes in firs, rim excess 0 Black 5 Green 1 Brown 6 Blue 2 Red 7 Viole 3 Orange 8 Gray 4 Yellow 9 Whie 198 All dimensions in inches (millimeers in parenhesis) In Norh America: Pricing Delivery: Tech Suppor: Specificaions subjec o change.
11 Pins Conacs Series II Hand Crimp Power Turre Use Locaor Plasic Inserion/ Inserion Exracion Meal Inserion Color Meal Exracion Color Tool Crimp Tool Heads Color Exracion Tip Tip Tool Band Tool Band Tool Color Color 1 2 M22520/2-01 WA22== M22520/ M81969/14-01 Green Whie MS27495A22M Black MS27495R22M Black Whie M22520/2-01 WA22== M22520/ M81969/14-01 Green Whie MS27495A22M Black MS27495R22M Black Whie M22520/2-01 WA22== M22520/ M81969/14-01 Green Whie MS27495A22 Black MS27495R22 Brown Whie M22520/1-01 WA27F== M22520/1-04 Red M81969/14-10 Red Orange MS27495A20 Red MS27495R20 Red Whie M22520/1-01 WA27F== M22520/1-04 Blue M81969/14-03 Blue Whie MS27495A16 Blue MS27495R16 Blue Whie M22520/1-01 WA27F== M22520/1-04 Yellow M81969/14-04 Yellow Whie DAK95-12B - DRK95-12B == Call for more ool accessories Series Series II Sockes Hand Crimp Power Turre Use Locaor Plasic Inserion/ Inserion Exracion Meal Inserion Color Meal Exracion Color Tool Crimp Tool Heads Color Exracion Tip Tip Tool Band Tool Band Tool Color Color 1 2 M22520/2-01 WA22== M22520/ M81969/14-01 Green Whie MS27495A22M Black MS27495R22M Black Whie M22520/2-01 WA22== M22520/ M81969/14-01 Green Whie MS27495A22M Black MS27495R22M Black Whie M22520/2-01 WA22== M22520/ M81969/14-01 Green Whie MS27495A22 Black MS27495R22 Brown Whie M22520/1-01 WA27F== M22520/1-04 Red M81969/14-10 Red Orange MS27495A20 Red MS27495R20 Red Whie M22520/1-01 WA27F== M22520/1-04 Blue M81969/14-03 Blue Whie MS27495A16 Blue MS27495R16 Blue Whie M22520/1-01 WA27F== M22520/1-04 Yellow M81969/14-04 Yellow Whie DAK95-12B - DRK95-12B == Call for more ool accessories. For Assisance in Europe Please See he Back Cover For a Complee Lising of Our Branch Offices and Conac Numbers. Specificaions subjec o change. 199
12 38999 Series Series II Series II A-A-Glance Name: Company: Phone: Qy: EAU: Addiional Connecor Informaion CONNECTOR Par #: OR # of Conacs: Sizes & Type: CABLE Manufacurer: (If Known) CABLE Par #: OR Cable OD: Choose One Connecor Choose One Endbell Choose One Wire Proecion Use endbell U for Menus A, B, C, D & E Crimp Terminaion Only Use endbell CG for Menus F, G & H Commens/Noes: 200 In Norh America: Pricing Delivery: Tech Suppor: Specificaions subjec o change.
MIL-DTL Series 1 Solder Type PT
MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally
More informationAmphenol Industrial Reverse Bayonet AIB
AI Coercial and Military Applications Amphenol Industrial Reverse ayonet AI AI Series is basically a MILDTL5015 (MILC5015) connector, but with an improved coupling system. AI Series replaces the threaded
More informationFlow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges
Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for
More informationFlow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges FS 10
Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for
More informationITT Cannon KJL Series MIL-DTL Series I Connectors
APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING
More informationAmphenol Industrial Threaded AIT
mphenol Industrial Threaded IT IT Series is a low cost, MILDTL5015 threaded type connector for use in harsh environmental conditions. This popular, cylindrical connector is particularly well suited to
More informationTKA SERIES Chip-Tight Tube Series
TKA55 Corporae Headquarers U.S. Tsubaki Power Transmission, LLC 301 E. Marquard Drive Wheeling, IL 60090 Tel: (800) 33-7790 Fax: (847) 459-95 www.ussubaki.com Roller Chain Division 81 Main Sree Holyoke,
More informationHYDRAULIC JACKS & TOOLS
HYDRULIC JCKS & TOOLS 323 Hydraulic jacks & ools Table of conens Page characerisic of his force-oriened hydraulic Hydraulic cylinders, single-acing program is he operaing pressure which can be as high
More informationElectronic timer CT-MKE Multifunctional with 1 thyristor
Daa shee Elecronic imer CT-MKE Mulifuncional wih 1 hyrisor The CT-MKE is a mulifuncional elecronic ime relay. I is from he CT-E range. The CT-E range is he economic range of ABB s ime relays and offers
More informationSeries VCHC MPa Check Valve 06 G VCHC40 TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. How to Order. Specifications AS-FE KE
Ma Check Valve Series How o Order Using NSF-H cerified grease for he guide ring (sliding) secion Symbol Improved durabiliy in high- environmens by using a polyurehane elasomer poppe 06 G or size 06 3/4
More informationMOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Translucent polyamide (PA) PA66, GB 30% (ball fibre reinforced)
MOTORISE VALVES sainless seel body hreaded pors, /8 - / - / / Series 90 FEATURES High f due o angled sea design Ani-waerhammer design (fluid enry under he disc) Acuaor roaable hrough 60 Mainaining posiion
More informationCI/SfB. Xt6. July Ancon 500 Tension Systems for the Construction Industry
CI/SfB July 2010 X6 Ancon 500 Tension Sysems for he Consrucion Indusry 2 This brochure is prined on paper produced from 80% recycled pos-consumer fibre and 20% virgin pulp which is sourced from responsibly
More informationH Pin Voltage Surveillance with Time-out. Features. Typical Operating Configuration. Description. Pin Assignment. Applications.
EM MICELECTNIC-MIN S -Pin olage Surveillance wih Time-ou Feaures Proper microprocess resar afer power up Process rese a power down n-chip oscilla gives a ypical P of 60 ms ese oupu wking down o.6 No exernal
More informationSpecification for Wire Rope Type Electrical Hoist
YUANTAI CRANE Specificaion for Wire Rope Elecrical Hois Compac srucure, ligh weigh, safe and reliable. High universaliy, inerchangeabiliy and lifing capaciy. Convenien,easy mainenance and operaion,sable
More information2/2 MOTORISED VALVES. stainless steel body threaded ports, 3/8-1/2-3/4. Series
MOTORISE VALVES sainless seel body hreaded pors, /8 / / / Series 9 FEATURES High flow due o angled sea design Aniwaerhammer design (fluid enry under he disc) Acuaor roaable hrough 6 In opion closing of
More informationMiniature Aluminum Electrolytic Capacitors
Miniaure Aluminum Elecrolyic Capaciors NRS Series RADIAL LEADS, OLARIZED, NE URTER REDUCED CASE SIZING, ROM NRA IDE TEMERATURE RANGE RoS EX TEND ED TEM ER A TURE Complian NRA NRS includes all homogeneous
More informationHSS Hollow. Structural Sections DIMENSIONS AND SECTION PROPERTIES HSS: TECHNICAL BROCHURE
HSS Hollow Srucural Secions DIMENSIONS AND SETION PROPERTIES HSS: TEHNIAL BROHURE 01 Seel Tube Insiue 516 Waukegan Road, Suie 17 Glenview, IL 6005 TEL: 87.61.1701 FA: 87.660.7981 HSS Manufacuring Mehods
More informationPush Buttons and Operator Interface Type K Rotary Cam Switch Class 9003
K Roary Cam Swich Class 900 The Class 900 K roary cam swich is a versaile means of providing inexpensive logic conrol. The Class 900 K cam swich is available wih: k Up o swiching posiions k Worldwide accepance
More informationLINEAR BAR GRILLS. Supply, Return, Extract Linear bar grilles and registers
Supply, Reurn, Exrac Linear bar grilles and regisers LG-1 F W B N B B TIM model LG-1 is a reurn air grille wih fixed profiled linear blades of 0 wih 3 mm hickness, se a 12.5 mm or 6 mm pich. F = Frame
More informationXSz 8... XSz 50 Solenoid actuated fail-safe safety valve
> > /-way or size: G /4... G, /4... NT > > ouble valve conrol sysem, inherenly failsafe wihou residual pressure > > ynamic self monioring > > For use wih pneumaic cluch and brake sysems and oher -way safey
More informationCI/SfB. Xt6. July Tension and Compression Systems for the Construction Industry
CI/SfB July 2010 X6 Tension and Compression Sysems for he Consrucion Indusry 2 This brochure is prined on paper produced from 80% recycled pos-consumer fibre and 20% virgin pulp which is sourced from responsibly
More informationMPA BAU Hannover Inspection Report Page 1. Strip Coating Line Babe 1/Babe 2
MPA BAU Hannover Inspecion Repor 082618.1 Page 1 MPA BAU Hannover Inspecion Repor # 082618.1 Su Cusomer: Manufacurer: Order: voesalpine Sahl GmbH voesalpine Sahl GmbH Srip Line Babe 1/Babe 2 9 June 2008/Markus
More informationDrive systems. Cranes with character. ABUS crane systems targeted operation. Moving on up. crane systems. t t v. max.
Cranes wih characer max. 0 ABUS crane sysems argeed operaion Drie sysems crane sysems Moing on up. Pole change sysems he fas way from A o B Experienced crane operaors are horoughly conersan wih he behaiour
More informationDemag hot metal ladle cranes. Two-girder and four-girder process cranes for the ferrous and non-ferrous industry
Demag ho meal ladle cranes Two-girder and four-girder process cranes for he ferrous and non-ferrous indusry Demag process cranes providing performance in he ferrous and non-ferrous indusry Demag Cranes
More informationINSTALLATION AND OPERATION MANUAL
INSTALLATION AND OPERATION MANUAL 2-Ton Hydraulic Folding Shop Crane Model: RSC-2TF PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU
More informationfor your rolling needs
In 2015 he firs ma rolling machine from Inwaec was insalled in a branch of he uniform renal and linen supply company Canadian Linen. Since hen pleny of ma rollers has followed. None of he oher ma rollers
More informationCI/SfB Xt6. June Tension and Compression Systems. for the Construction Industry
CI/SfB X6 June 2017 Tension and Compression Sysems for he Consrucion Indusry Tension and Compression Sysems High performance in an archiecural design Tension and compression bars are increasingly being
More informationHoisting Equipment Trolleys
ush and geared ype rolley model and model Capaciy 500-20000 The rolley enales he exac posiioning or easy raversing of large loads wih eiher manual or powered hoising equipmen. Feaures has excellen rolling
More informationMiniature Aluminum Electrolytic Capacitors
Miniaure Aluminum Elecrolyic Capaciors 84 RADIAL LEADS, OLARIZED, STANDARD CASE SIZING NRSA (oday s sandard) NRSS (reduced sizes) CARACTERISTICS *See ar Number Sysem for Deails Raed Volage Range 6.3 ~
More informationIndex. General Information 5-6. Technical Information. 1-pole terminal boards. 2-pole terminal boards. 3-pole terminal boards. 4-pole terminal boards
Terminal Blocks Index Page General Informaion Technical Informaion pole erminal boards pole erminal boards 3pole erminal boards pole erminal boards pole erminal boards ype KL...K ype K M (acc. o DIN )
More informationTHE NEXT GENERATION FOR YOUR APPLICATIONS. QuickTrax EasyTrax UNIFLEX Advanced TKA series
THE NEXT GENERATION FOR YOUR APPLICATIONS QuickTrax EasyTrax UNIFLEX Advanced TKA series A NEW GENERATION THE NEXT GENERATION FOR YOUR APPLICATIONS For more han 60 years Tsubaki KabelSchlepp has been developing
More informationHeat-Resistant 065. C-PVC Pipe & Fittings. C-PVC Pipe C-PVC Fittings Expansion Joint/Prefab Joint Flange Welding Rod Technical Document P.066 P.
C-PVC Pipe & Fiings C-PVC Pipe C-PVC Fiings Expansion Join/Prefab Join Flange Welding od Technical Documen P.066 P.067 P.075 P.077 P.077 P.078 ea-esisan 065 C-PVC Pipe & Fiings PODUCT MODE CODE IST Type
More informationLoad Moving Systems. Steerman Heavy load moving systems model SX and model S. Capacity t
Seerman Heavy load moving sysems model SX and model S 10-100 These universal heavy load moving sysems have been designed for he safe and cos saving ranspor of loads up o 100 ons. Individual configuraion
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationElectrohydraulic pumps
+ () 699959 Elecrohydraulic pumps RE 1 1/. 1/7 Replaces: RE 1 1/3.1 EHP Nominal volage (DC):...11 V Size of pump: 1...22.5 cm 3 /rev Table of conens Conen Page Ordering code 2 Program overview Technical
More informationPOWER-ZONE Ill Low Voltage Metal-Enclosed Drawout Switchgear SQUARED. Class 6035 July 1994 Supersedes Catalog Class 6035 Dated June 1988
FLE: isribuion Producs Caalog Class 635 July 1994 Supersedes Caalog Class 635 aed June 1988 POWER-ZONE ll Low Volage Meal-Enclosed rawou Swichgear CONTENTS escripion Class Pages General escripion. 635..
More informationC560 Electronic Time Relays
C560 Elecronic Time Relays Conens Ordering Deails Mono-funcion Elecronic Time Relays... /4 Muli-funcions Elecronic Time Relays... /5 Accessories for Elecronic Time Relays.../5 Technical Daa Technical Daa.../6
More informationKJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features
Applications Features High Performance ilitary Aircraft Commercial Airlines Communications Equipment Armored Personnel Carriers & Tanks Quick ating A three point bayonet coupling system that not only makes
More informationR182J, R482J, R845A, R847A, R882J, RA89A, RA832A Switching Relays
RJ, RJ, RA, RA, RJ, RA9A, RAA Switching Relays hese relays provide intermediate or heavy duty service in a wide variety of switching configurations. Relays with V control coils: RlJ, RJ, RA, RA9A, RAA,
More informationWÜPLAST WÜPLAST. WÜRTH Industrie Service. Screws for thermoplastics. Screws for thermoplastics DE EN
WÜPLAST Screws for hermoplasics WÜRTH Indusrie Service DE EN WÜPLAST Würh Indusrie Service GmbH & Co. KG Indusriepark Würh, Drillberg 97980 Bad Mergenheim T +9 79 31 91-0 F +9 79 31 91-000 wueplas@wuerh-indusrie.com
More informationNote t Metal glow plugs are always fitted in the 2.7 ltr. common rail engine.
Removing and insalling glow plugs Page 1 of 5 Removing and insalling glow plugs Noe Meal glow plugs are always fied in he 2.7 lr. common rail engine. Two differen ypes of glow plugs are fied in he 3.0
More informationCrawler Crane. Complies with ANSI/ASME B 30.5 LR enus LR Courtesy of Crane.Market
Crawler Crane LR Complies wih ANSI/ASME B 0.5 enus LR 00.0 Couresy of Crane.Marke Dimensions Basic machine wih undercarriage R 8 0 7 9 0 9 0 6 0.5 59 8 8 7 5 6 7 5 7. 6 R 0 7. 6 Operaing weigh Remarks
More informationScreed flush duct systems
creed flush duc sysems creed flush duc eavy-duy floor duc A04-A16 A18-A21 A umeric index creed flush duc sysems Fla head apping screw A16 K ens head screw A16 U UDF levelling suppor A14 UK boom piece A18
More informationLOAD REDI LIFT TABLES. l Light Duty. l Medium Duty. l Portable. l Tilt
LIFT TABLES l Ligh Duy l Medium Duy l Porable l Til TILT TABLES Beech Til Tables are designed for muliple applicaions enabling he work o be posiioned up o degrees, decreasing he need for workers o srech,
More informationJUMO etron M100 Electronic Refrigeration Controller
JUMO GmbH & Co. KG Delivery address:mackenrodsraße 4, 36039 Fulda, Germany osal address: 36035 Fulda, Germany hone: +49 66 6003-0 Fax: +49 66 6003-607 e-mail: mail@jumo.ne Inerne: www.jumo.ne JUMO Insrumen
More informationStandards and Safety. New standards with new requirements no problem, thanks to Rexroth. Your tasks... European Machinery Directive 98/37/EC EN 954-1
4 Elecromechanical Cylinders EMC andards and afey andards and afey New sandards wih new requiremens no problem, hanks o Rexroh Wheher he ask involves machine ools, packaging and prining machines, assembly,
More informationMultiMAXX HN DATA & FACTS
MuliMAXX HN DATA & FACTS Table of Conens MuliMAXX HN Uni Type Code... 4 Abou his Caalogue... 7 Capaciy Overview... 8 Uni Descripion... 9 Uni Overview... 9 Componens... 1 Uni Examples... 19 Applicaion Examples...
More informationPRODUCT DEsCRIPTION. optibelt ZR TIMINg belts IsO 5296
opi ZR TIMINg belts srucure Bel layer ension cord ooh Fabric Fabric In order o obain a low level of wear on he running surfaces as well as achieving a high level of oohear srengh, a ough, wear resisan
More information5TT3 4 voltage and frequency relays
s SENTRON 5TT3 4 volage and frequency relays Sandard-complian grid and plan proecion for in-plan power generaion sysems Reliable grid monioring for energy infeed The 5TT3 4 volage and frequency relay is
More informationTechnical data Hydraulic crawler crane HS 825 HD
Technical daa Hydraulic crawler crane HS 825 HD Dimensions Basic machine wih undercarriage 2860 7360 3000 1700 1060 1000 3260 1200 2335 4610 5480 1080 700 4200 310 R 3900 11245 Operaing weigh The operaing
More informationAround-the-clock reliability, all year round
EUCLID HAULERS Around-he-clock reliabiliy, all year round Our philosophy: he mos valuable par of a Euclid hauler Since he very beginning, Euclid haulers have been designed and buil o be he bes. For over
More informationThread Milling. Tool Systems.
www.mimaic.de 2017 The affordable sysem wih high performance allows hreading and / or circlip grooving in high precision. The polygonal connecion of inser and milling body improves he efficiency and precision
More informationTELESCOPIC BOOM CRAWLER CRANE
MACHINE WEIGHTS 35 METRIC TON CAPACITY STANDARD CRANE wih 3 secion- 27.2 m boom, 5,670 kg counerweigh, Main winch wih wire rope, and 750 mm 3-bar semi grouser rack shoes 31,802 kg OPTIONAL EQUIPMENT Exendable
More informationSACE Emax 2. Low voltage air circuit-breakers Emax E1.2-E2.2-E4.2-E6.2. Instructions for using Ekip Touch protection trip units and Accessories.
DOC. N 1SDH001316R0002 - ECN000086018 - Rev. C SACE Emax 2 Low volage air circui-breakers Emax E1.2-E2.2-E4.2-E6.2 Insrucions for using Ekip Touch proecion rip unis and Accessories. 2 2018 ABB 1SDH001316R0002
More informationTOOLS TO FIRE YOUR EMOTION! NEW! V5513 Tube flaring tool set V4944, EAN V4945, EAN HOT17-2/EN/NO/9
TOOLS TO FIRE YOUR EMOTION! V551 Tube flaring ool se 14 Valid unil: February 28, 2018 For new VAG and BMW brake lines wih addiional covering! approx. Ø 4.78 approx. Ø 5.15 1 Video Closed solid V4944 seel
More informationINSTALLATION AND PARTS MANUAL
INSALLAION AND PARS MANUAL FOR D8R SERIES II RACORS ABLE OF CONENS Foreword.................................................2 Installation Instructions......................................2 Winch Mounting
More informationOver Voltage Protector
CPS polarized ype PSPL, CPS non-polarized ype PSNP. OVER VOLTAGE PROTECTOR For overvolage proecion has developed a new device : he CPS. This is a device whose original concep gives i very ineresing characerisics
More informationSeries S0700 Plug-in Manifold Stacking Base Manifold Optional Parts
Series S0700 lug-in Manifold Sacking Base Manifold Opional ars Blanking plae SS0700-0A- I is used by aaching on he manifold block for being prepared for removing a valve for mainenance reasons or planning
More informationBALL BEARING UNITS SET SCREW TYPE PILLOW BLOCKS CAST HOUSING UCP2 SET SCREW TYPE FLANGED UNITS CAST HOUSING UCF2
ERIG UIT ET CREW TYPE PIOW OCK CT OUIG UCP haf Diameer 90 8 / 3 / ET CREW TYPE FGED UIT CT OUIG UCF haf Diameer 90 88 UCF / 3 / haf Diameer 90 94 / 3 / 76 77 . COTRUCTIO The K bearing uni is a combinaion
More informationLow Speed High Torque Hydraulic Motors Xcel XLH, XLS, XL2 and XL4 Series
Low Speed High Torque Hydraulic Moors Xcel XLH, XLS, XL2 and XL4 Series Conens Xcel Spool Valve Moors.... 4 Produc Descripion, Feaures Benefis and Applicaions.... 4 Xcel XLH Series (16-)... 5 Specificaions....
More informationFeatures. Continuous UltraMOV Series Units. ) -55 to +125 ºC. Hi-Pot Encapsulation (COATING Isolation Voltage Capability) 2500 V
RoHS Descripion The UlraMOV Meal Oxide Varisor Series is designed for applicaions requiring high peak surge curren raings and high energy absorpion capabiliy. UlraMOV varisors are primarily inended for
More informationLEGEND SUPER FULLY AUTOMATIC
FULLY AUTOMATIC LEGEND SUPER Models UNIT Super 60 Super 80 Super 120 Super 180 Super 250 Super 1000 Injecion Unis Screw Diameer MM 3 8 40 45 50 65 110 Max. Sho Weigh (PS) GMS 85 150 220 425 850 7000 Plasicizing
More informationAll Electric Servo Drive Injection Molding Machine
Shanghai Hanau(Germany) Hong Kong Lyon Barcelona Shenzhen Hanoi Bangkok Gurgaon Singapore Jakara Seoul Tokyo Headquarer Taipei Tainan Manila Los Angels Overseas Office Agen Chicago Deroi Sao Paulo All
More informationAutomotive Controller for Utility Vehicles. Application Description
Auomoive Conroller for Uiliy ehicles Applicaion Descripion Auomoive Conroller for Uiliy ehicles Applicaion Descripion Overview DESCRIPTION The SauerDanfoss Transmission Conrol Concep allows a vehicle equipped
More informationBreaking Capacity. See Interrupting Rating. Current Rating
Fuse Facs The following Fuse Facs secion will provide a beer undersanding of boh fuses and heir ypical applicaion. The fuses described are curren-sensiive devices ha serve as an inenional weak link in
More informationMasterAria. electronic controller. User manual
MaserAria elecronic conroller User manual WARNINGS DISPOSAL CAREL bases he developmen of is producs on decades of experience in HVAC, on he coninuous invesmens in echnological innovaions o producs, procedures
More informationTechnical data Hydraulic lift crane LR Courtesy of Crane.Market
Technical daa Hydraulic lif crane Complies wih ANSI/ASME B 0.5 LR Serial number 5xxx Couresy of Crane.Marke Dimensions Basic machine wih undercarriage R 8 0 7 9 0 9 0 6 0.5 59 8 8 7 5 6 7 5 7. 6 R 0 7.
More informationCROSSOVER EXCEPTIONAL MOBILITY... HYDRAULIC EXCAVATOR THE FIRST DESIGNED AND BUILT WITH AMERICAN INGENUITY
THE FIRST CROSSOVER HYDRAULIC EXCAVATOR G radall Indusries inroduces he cos-effecive soluion for governmens and conracors who need o do more work wih fewer machines on igh budges. Gradall s Discovery Series
More informationDimensions. Electrical connection
SU8-6/40a/0//6a Eecrica connecion Reease dae: 20-09-6 :4 Dae of issue: 20-0-20 8084_eng.xm 9 SENS H.Res Norm H.Spd Off.D T.Off On.D LO DO Mode Number SU8-6/40a/0//6a opic sensor wih fixed cabe BN +UB Feaures
More informationUniversal Step-Down DC/DC Converter Design Using AIC1563
Universal Sep-Down DC/DC Converer Design Using AIC56 Ben Tai Absrac olage required in he modern elecronic sysems are single or muliple regulaed volages such as., 5, 2, -5, or 2, ec. I can be supplied by
More informationmicrotes Precision Metrology in Action
microes Prodej a servis měřící echniky. Tel: 776 182 329, 739 070 339 Srahovice 159, 747 24 Chuchelná e-mail: info@microes.cz hp: www.microes.cz Exclusively available from specialized dealers Precision
More informationInstruction Bulletin. MASTERPACT MP, MF and MC Circuit Breakers
nsrucion Bullein 48049-071-03 01/2002 Cedar Rapids, A, USA MASTERPACT MP, MF and MC Circui Breakers Reain for fuure use. MASTERPACT MP, MF and MC Circui Breakers 48049-071-03 nsrucion Bullein 01/2002 NOTCE!
More informationElectronic relays. Timing. Timing
Elecronic relays Descripion C56x iming relays are snapped direcly ono a 35mm DIN rail safely and easily in accordance wih DIN VDE 50 022. Assembly and disassembly can be performed wihou complicaions or
More informationPrice List Connecting and Lifting Systems
C O N N E C T I N G A N D L I F T I N G S Y S T E M S Lis 1-2010 Connecing and Lifing Sysems PFEIFER SEIL- UND HEBETECHNIK GMBH DR.-KARL-LENZ-STRASSE 66 87700 MEMMINGEN TEL. Suppor +49 (0) 83 31-937-345
More informationAbout the Company Sumy NPO PJSC
1 Abou he Company Sumy NPO PJSC Sumy NPO PJSC, founded in 1896, is now one of he larges machine-building enerprises in Europe manufacuring equipmen and developing complex soluions for oil, gas, chemical,
More informationHT STRAIGHT ADAPTER, WRENCH FLATS ( )
HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS
More informationPRODUCT CATALOG 2010 SİZ K AGRICULTURE HORTICULTURE GREENHOUSE AUTHOR,=(' ',STR,%UTOR &,032R7(R,1 TUR.(Y. %ñ/gñ1/(r '$1,ì0$1/,K
PRODUCT CATALOG 2010 AGRICULTURE HORTICULTURE GREENHOUSE %ñ/gñ1/(r '$1,ì0$1/,K SİZ K İ TR oransal Ð K E as EL zaj pomp do AUTHOR,=(' ',STR,%UTOR &,032R7(R,1 TUR.(Y ( Ferilizer & Chemical injecors are waer
More informationSize d Grain # AC No. mm in mm in mm in. Size. mm mm mm
Accessories SANING ISCS FOR ANGLE AN VERTICAL SANERS AC No. Grain # s mm in mm in P-5 125 5 22.2 7/8 14~60 FG-5PX-1 P-6 150 6 22.2 7/8 14~60 FA-4CHK-3, 3F FA-150K-2, 3 FA-6C-9, 9M P-7 180 7 22.2 7/8 14~60
More informationSI54.21-W-0013A Service Information: New functions in base module MODEL 930, 932, 933, 934
SI54.21-W-13A Service Informaion: ew funcions in base module 23.1.3 n he ACTS, models 93-934 a series of new funcionaliies - PT daa have been inegraed ino he base module (A7). eques and feedback of PTs
More informationAmphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
More informationSpecifications for Europe
~Reliable Sales and Service Nework~ Elecric Servo Drive Shanghai Hong Kong Shenzhen Hanoi Bangkok Gurgaon Kuala Lumpur Singapore Jakara Tokyo Headquarer Taipei Tainan Manila Ho Chi Minh Los Angels Chicago
More information... (fie ()~")\'1DS\-" :\.ob lf. EFI Diagnostic Tool Instructions. Diagnostic Tool Setup for "Bench Testing"
EFI EFI Diagnosic Tool Insrucions Diagnosic Tool Seup for "Bench Tesing" The EFI diagnosic esing funcions: ool provides four key ECD CL"fNEOCTOR \ D~'jOSTlC MCOJlf.:o!'meCTQF' l Auomaic esing of EFI ECU
More informationThread Milling Tool GWF
Thread Milling Tool GWF Thread milling >Ø20 mm Spiral flued solid carbide ools, some wih face cuer and fron chamfer This offers he following main advanages compared o he convenional mehods of apping and
More informationTE Connectivity DEUTSCH Single Module EN4165 connectors
Applications Cabin and avionic systems High-performance military aircraft Commercial airlines Communications equipment Missiles Military Railway TE Connectivity DEUTSCH Single Module EN4165 Connectors
More informationReliability Analysis of Pre-stressed Concrete Continuous Girders Bridge using Incremental Launching Method on Different Codes
Applied Mechanics and Maerials Submied: 2014-08-27 ISSN: 1662-7482, Vol. 681, pp 205-208 Aeped: 2014-08-27 doi:10.4028/www.scienific.ne/amm.681.205 Online: 2014-10-20 2014 Trans Tech Publicaions, Swizerland
More informationZhafir Venus. Series Specifications / International. Zhafir Venus II Series kN
Zhafir Venus II Series Zhafir Venus Series Specificaions / Inernaiona -5 ZHAFIR PLASTICS MACHINERY GMBH Jubaus-Aee 8-10 92263 Eberannsdorf Gerany Te. +49-9438-9412-0 Fax. +49-9438-9412- E-Mai: conac@zhafir.co
More informationALLU PRODUCT CATALOG
ALLU PRODUCT CATALOG ALLU ATTACHMENT ALLU Screener Crusher - hydraulic aachmen for wheel loader, excavaor or skid seer Wih ALLU Screener Crusher you can screen, crush, pulverise, aerae, blend, mix, separae,
More information... MILITARY SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE
.... e.,,.., ML-C-8353/5D 30 Januu 987 ML-c-8353/5c 20 November 986 MLTARY SPECFCATON SHEET CONNECTORS, ELECTRCAL, RECTANGULAR, MCROMNATURE, MOUNTNG HARDWARE This specificaion is approved for use by all
More information06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS
More informationINSTALLATION AND OPERATION MANUAL
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF THIS MANUAL. FORWARD THIS MANUAL
More informationFeatures and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
More informationSpecifications. ~Reliable Sales and Service Network~ Shanghai Hong Kong Shenzhen Hanoi Bangkok Gurgaon. Detroit. Chicago
~Reliable Sales and Service Nework~ Elecric Servo Drive Shanghai Hong Kong Shenzhen Hanoi Bangkok Gurgaon Kuala Lumpur Singapore Jakara Tokyo Headquarer Taipei Tainan Manila Ho Chi Minh Los Angels Chicago
More information8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
More informationMIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )
MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:
More informationB Block Cylinders double acting, max. operating pressure 500 bar. Issue E
Iue 11-12 E B 1.5094 Block Cylinder double acing, max. operaing preure 500 bar Applicaion Double-acing block cylinder can be ued univerally for all ydraulically-operaed linear movemen. Poiioning Clamping
More informationINSTALLATION AND OPERATION MANUAL
INSTALLATION AND OPERATION MANUAL 12,000 Pound capaciy SURFACE MOUNTED full-rise SCISSOR LIFTS Models: XR-12000 xr-12000a IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Please read THE ENTIRE CONTENTS
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICAIONS D05 Pattern Directional Control Valves Also refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONAC INFORMAION USA Headquarters Dynex/Rivett
More informationCC BOOM BOOSTER. Upgrade kit Crawler crane Datasheet metric
CC 88001 BOOM BOOSTER Upgrade ki Crawler crane Daashee eric CC 88001 BOOM BOOSTER CONTENTS CC 88001 BOOM BOOSTER Cobinaions...................................................................................................
More information2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools
2M, Contacts, and Tools Page Guide Contact Tools... 98 Assembly... 99-100 Plugs Tools... 101, 102 2M Python... 103 Strain Relief Clamp.. 104, 105 Micro Band Adapter... 106-109 Enviromental Backshells...
More informationPower Thyristor TS2 (SP) 1ph. Instruction for installation. TS2 (SP) 1ph. Contents: Page:
Power Thyrisor TS2 (SP) 1ph Insrucion for insallaion L1 N (L2) TS2 (SP) 1ph Conens: Page: 1. General descripions 2 2. Se up of power hyrisor TS2 (SP) 1ph 3 3. Insallaion 4 4. Terminal connecions 5 5. Technical
More information