SIDE IMPACT IIHS. Page 1 / 7. MESSRING Systembau MSG GmbH. Printing errors and omissions reserved
|
|
|
- Scarlett Pierce
- 5 years ago
- Views:
Transcription
1 SIDE IMPACT IIHS Explore a moving barrier for tests of occupant protection! Equipped with an advanced brake system and individually calibrated by MESSRING. I Brake system for each wheel I Wireless or cable-controlled I Increased mass and profiled barrier shape I Ballast plates adjusted according to the standard I Individually calibrated center of gravity and moment of inertia (optional) I Height of front shield adjustable Page 1 / 7
2 DESCRIPTION The ECE moving barrier is used in performing tests to determine the safety of occupants in the event of a side impact in compliance with the requirements of ECE R95 according to Trans/SC1/GRSP/R48/Rev1, with deformation components that can be obtained from various manufacturers. The moving deformable barrier is equipped with a hydraulic-pneumatic brake that prevents a secondary impact on the test vehicle, and can also be used as an emergency braking system (in the case of an aborted test, for instance). Figure 1: Side Impact according to IIHS REGULATIONS I For tests according to IIHS (Insurance Institute for Highway Safety) I Moving Deformable Barrier Specification October 2007 I NHTSA Lab Test Procedure I Dynamic Side Impact Protection and TP214 Appendix C Page 2 / 7
3 MAIN COMPONENTS No. Description 1 Frame 2 Ballast plates 3 Bogies with disc brakes (4 pieces) 4 Vehicle brake system 5 Support ballast plates 6 Deformation element (not included) Figure 2: Moving barrier, perspective view 7 Front shield for connection of the deformation element 8 Camera stand for installation of a video camera (optional) 9 Cable support tube for guidance and protection of the umbilical Cable Figure 3: Dimensions Page 3 / 7
4 BRAKE SYSTEM In order to be able to decelerate the moving barrier in case of emergency and after the impact, a vehicle brake system is installed which operates the disk brakes. Figure 5 shows a moving barrier with hydropneumatic vehicle brake; as an alternative, the moving barrier is also available with a hydraulic vehicle brake. Wireless remote control or control via trailing cable Failsafe operation (automatic actuation in case of cable brake or power blackout) Controllable via CrashSoft facility control software Figure 4: Hydraulic-pneumatic brake system Figure 5: Braking system mounted on moving barrier Page 4 / 7
5 BRAKING OPERATION The moveable barrier is equipped with a brake system, which prevents the barrier to hit the target vehicle a second time after the impact. Tha brake system can also be used to trigger an emergency stop of the barrier, in case of the abortion of a test. The brake system is mounted on the center of the main frame and is coupled to the four disk brakes on each wheel. This ensures that each wheel is braked simultanously. In the case of a necessary abortion of a test, the brake can be activated with the emergency stop button. The signal will then be send to the brake system via the attached trailing cable, or optionally wireless with a remote radio signal. The brake is aktivated by deasserting the 24V control signal from the brake. This ensures that the braking mechanism is also triggered in the case of a cable break or power blackout. Figure 6: Connection of braking hoses Figure 7: Coupling of trailing cable Figure 8: Wireless remote control Page 5 / 7
6 COUPLING THE MOVING BARRIER I Mount the tow cable set to the swivel eye bolts on the barrier using the screw element I Connect the tow cable set to the hook of the trolley No. Description 1 Moving Barrier 2 Swivel eye 3 Tow cables (2 pieces) 4 Trolley with hook Figure 2: Coupling the moving barrier Page 6 / 7
7 TECHNICAL SPECIFICATIONS General: Length (without deformation element) Width Height Crash weight Wheelbase Tire tread width Tire Tire pressure Shield: Width Height Thickness of plywood plate Hydraulic-pneumatic Brake System: Hydraulic pressure (operating pressure) Air pressure (operating pressure) Switching voltage 3,632 mm 2,095 mm 1,657 mm 1,500 ±5 kg 2,591mm 1,880 mm P 205/75 R psi / 0.25 MPa 1,676 mm 860 mm 19 mm psi / 9 MPa mind psi / 0.6 MPa 24 V Scope of Supply I Moving barrier I Hydraulic-pneumatic brake I Trailing cable I Camera stand (optional) I Deformation element (optional) I Cable support tube 2HCA1_Movbarrieriihs
NHTSA OBLIQUE/SMALL OVERLAP MOVING BARRIER (OMDB)
NHTSA OBLIQUE/SMALL OVERLAP MOVING BARRIER (OMDB) Moving barrier for frontal oblique crash simulation with a small overlap. I Integrated hydraulic brake system I Wireless remote or trailing cable control
FAAC International, Inc.
TEST REPORT FOR: FAAC International, Inc. J 355 HA M30 (K4) Bollard TESTED TO: ASTM F 2656-07 Standard Test Method for Vehicle Crash Testing of Perimeter Barriers Test M30 PREPARED FOR: FAAC International,
REPORT NUMBER: 301-CAL SAFETY COMPLIANCE TESTING FOR FMVSS 301 FUEL SYSTEM INTEGRITY HONDA MOTOR COMPANY 2007 HONDA ACCORD 4-DOOR SEDAN
REPORT NUMBER: 301-CAL-07-05 SAFETY COMPLIANCE TESTING FOR FMVSS 301 FUEL SYSTEM INTEGRITY HONDA MOTOR COMPANY 2007 HONDA ACCORD 4-DOOR SEDAN NHTSA NUMBER: C75304 CALSPAN TEST NUMBER: 8832-F301-05 CALSPAN
Manual for Assessing Safety Hardware
American Association of State Highway and Transportation Officials Manual for Assessing Safety Hardware 2009 vii PREFACE Effective traffic barrier systems, end treatments, crash cushions, breakaway devices,
REPORT NUMBER: 301-CAL SAFETY COMPLIANCE TESTING FOR FMVSS 301 FUEL SYSTEM INTEGRITY REAR IMPACT FORD MOTOR COMPANY 2009 FORD F150 2-DOOR PICKUP
REPORT NUMBER: 301-CAL-09-03 SAFETY COMPLIANCE TESTING FOR FMVSS 301 FUEL SYSTEM INTEGRITY REAR IMPACT FORD MOTOR COMPANY 2009 FORD F150 2-DOOR PICKUP NHTSA NUMBER: C90206 CALSPAN TRANSPORTATION SCIENCES
REPORT NUMBER: 301-CAL SAFETY COMPLIANCE TESTING FOR FMVSS 301 FUEL SYSTEM INTEGRITY REAR IMPACT MAZDA MOTOR CORPORATION 2008 MAZDA CX-9 SUV
REPORT NUMBER: 301-CAL-08-03 SAFETY COMPLIANCE TESTING FOR FMVSS 301 FUEL SYSTEM INTEGRITY REAR IMPACT MAZDA MOTOR CORPORATION 2008 MAZDA CX-9 SUV NHTSA NUMBER: C85401 CALSPAN TRANSPORTATION SCIENCES CENTER
UNIMECK. Presents Truck Wheel Equipments. We Are The Leading Manufactures. Of Garage Equipments...
UNIMECK TM Tyre Service Equipment Pvt. Ltd. We Are The Leading Manufactures Of Garage Equipments... Presents Truck Wheel Equipments www.unimeckauto.com Heavy Vehicles/Truck & Bus Wheel Balancer Features:
REPORT NUMBER: 301-CAL SAFETY COMPLIANCE TESTING FOR FMVSS 301 FUEL SYSTEM INTEGRITY REAR IMPACT
REPORT NUMBER: 301-CAL-09-01 SAFETY COMPLIANCE TESTING FOR FMVSS 301 FUEL SYSTEM INTEGRITY REAR IMPACT HYUNDAI MOTOR COMPANY 2009 HYUNDAI ACCENT 4-DOOR SEDAN NHTSA NUMBER: C90503 CALSPAN TRANSPORTATION
REPORT NUMBER: 301-MGA SAFETY COMPLIANCE TESTING FOR FMVSS 301R FUEL SYSTEM INTEGRITY REAR IMPACT
REPORT NUMBER: 301-MGA-2007-002 SAFETY COMPLIANCE TESTING FOR FMVSS 301R FUEL SYSTEM INTEGRITY REAR IMPACT NISSAN MOTOR CO., LTD. 2006 NISSAN PATHFINDER LE 4X2 NHTSA NUMBER: C65200 PREPARED BY: MGA RESEARCH
REPORT NUMBER: 301-MGA SAFETY COMPLIANCE TESTING FOR FMVSS 301R FUEL SYSTEM INTEGRITY REAR IMPACT
REPORT NUMBER: 301-MGA-2010-007 SAFETY COMPLIANCE TESTING FOR FMVSS 301R FUEL SYSTEM INTEGRITY REAR IMPACT NISSAN MOTOR COMPANY LTD 2010 NISSAN CUBE NHTSA NUMBER: CA5205 PREPARED BY: MGA RESEARCH CORPORATION
CNG Fuel System Integrity
TEST METHOD 301.2 CNG Fuel System Integrity Revised: Issued: February 28, 2004R May 20, 1994 (Ce document est aussi disponible en français) Table of Content 1. Introduction... 1 2. Definition... 1 3. Test
RSA Protective Technologies
TEST REPORT FOR: RSA Protective Technologies K12 Surface Mounted Bollard System TESTED TO: ASTM F 2656-07 Standard Test Method for Vehicle Crash Testing of Perimeter Barriers Test M50 PREPARED FOR: Battelle
CRASH TEST REPORT FOR PERIMETER BARRIERS AND GATES TESTED TO SD-STD-02.01, REVISION A, MARCH Anti-Ram Bollards
CRASH TEST REPORT FOR PERIMETER BARRIERS AND GATES TESTED TO SD-STD-02.01, REVISION A, MARCH 2003 Anti-Ram Bollards Prepared for: RSA Protective Technologies, LLC 1573 Mimosa Court Upland, CA 91784 Test
CRASH TEST REPORT FOR PERIMETER BARRIERS AND GATES TESTED TO SD-STD-02.01, REVISION A, MARCH Anti-Ram Bollards
CRASH TEST REPORT FOR PERIMETER BARRIERS AND GATES TESTED TO SD-STD-02.01, REVISION A, MARCH 2003 Anti-Ram Bollards Prepared for: RSA Protective Technologies, LLC 1573 Mimosa Court Upland, CA 91784 Test
REPORT NUMBER: 301-MGA SAFETY COMPLIANCE TESTING FOR FMVSS 301R FUEL SYSTEM INTEGRITY REAR IMPACT
REPORT NUMBER: 301-MGA-2011-008 SAFETY COMPLIANCE TESTING FOR FMVSS 301R FUEL SYSTEM INTEGRITY REAR IMPACT MAZDA MOTOR CORPORATION 2011 MAZDA 2 SPORT MT NHTSA NUMBER: CB5400 PREPARED BY: MGA RESEARCH CORPORATION
TRS - Trailer Roll Stability
TRS - Trailer Roll Stability Todd Bourque Canadian OEM Sales Manager Braking Controls Division Haldex Brake Products, Inc. Innovative Vehicle Technology Innovative Vehicle Technology 2 1 Innovative Vehicle
IIHS Side Impact Evaluations. Sonja Arnold-Keifer 10/15/ th German LS-DYNA Forum
IIHS Side Impact Evaluations Sonja Arnold-Keifer 10/15/2018 15 th German LS-DYNA Forum Motivation Passenger deaths in the US per year in multiple-vehicle side impact crashes: [IIHS2015_1] 2 IIHS side impact
DESIGN FOR CRASHWORTHINESS
- The main function of the body structure is to protect occupants in a collision - There are many standard crash tests and performance levels - For the USA, these standards are contained in Federal Motor
REPORT NUMBER: 301-MGA SAFETY COMPLIANCE TESTING FOR FMVSS NO. 301 FUEL SYSTEM INTEGRITY
REPORT NUMBER: 301-MGA-2009-004 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 301 FUEL SYSTEM INTEGRITY GIRARDIN MINIBUS, INC. 2008 GIRARDIN G5 SCHOOL BUS NHTSA NO.: C80902 PREPARED BY: MGA RESEARCH CORPORATION
REPORT NUMBER: 301-MGA SAFETY COMPLIANCE TESTING FOR FMVSS 301R FUEL SYSTEM INTEGRITY REAR IMPACT
REPORT NUMBER: 301-MGA-2010-005 SAFETY COMPLIANCE TESTING FOR FMVSS 301R FUEL SYSTEM INTEGRITY REAR IMPACT NISSAN MOTOR COMPANY LTD 2010 NISSAN CUBE NHTSA NUMBER: CA5201 PREPARED BY: MGA RESEARCH CORPORATION
ROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
Statistics and Facts About Distracted Driving
Untitled Document Statistics and Facts About Distracted Driving What does it mean to be a distracted driver? Are you one? Learn more here. What Is Distracted Driving? There are three main types of distraction:
CEMA position on draft braking regulation, 4 June 2008 ENTR/F1/ /rev16
CEMA PT16 N05Rev CEMA position on draft braking regulation, 4 June 2008 ENTR/F1/5030-99/rev16 CEMA is the European association representing the agricultural machinery industry. It represents the industry
Design, analysis and mounting implementation of lateral leaf spring in double wishbone suspension system
Design, analysis and mounting implementation of lateral leaf spring in double wishbone suspension system Rahul D. Sawant 1, Gaurav S. Jape 2, Pratap D. Jambhulkar 3 ABSTRACT Suspension system of an All-TerrainVehicle
Petition for Rulemaking; 49 CFR Part 571 Federal Motor Vehicle Safety Standards; Rear Impact Guards; Rear Impact Protection
The Honorable David L. Strickland Administrator National Highway Traffic Safety Administration 1200 New Jersey Avenue, SE Washington, D.C. 20590 Petition for Rulemaking; 49 CFR Part 571 Federal Motor Vehicle
Headlamp Light Performance Evaluation
Headlamp Light Performance Evaluation John D. Bullough, Ph.D. Lighting Research Center, Rensselaer Polytechnic Institute GTB Glare and Visibility Forum October 22, 2018 Outline Lighting and safety Vertical
A New Generation of Crash Barrier Models for LS-DYNA
5. LS-DYNA Anwenderforum, Ulm 2006 Crash II - Verbindungstechnik A New Generation of Crash Barrier Models for LS-DYNA Brian Walker 1, Ian Bruce 1, Paul Tattersall 2, Mehrdad Asadi 2 1 Arup, United Kingdom
M=WALL LOAD CELL. Load cell for measuring forces and moments during vehicle impact.
M=WALL LOAD CELL Load cell for measuring forces and moments during vehicle impact. Measurement across a total of five axes Wide measuring range up to a maximum of 400kN ntegrated data acquisition Can be
Methodologies and Examples for Efficient Short and Long Duration Integrated Occupant-Vehicle Crash Simulation
13 th International LS-DYNA Users Conference Session: Automotive Methodologies and Examples for Efficient Short and Long Duration Integrated Occupant-Vehicle Crash Simulation R. Reichert, C.-D. Kan, D.
SHORT PAPER PCB OBLIQUE COLLISIONS ENGINEERING EQUATIONS, INPUT DATA AND MARC 1 APPLICATIONS. Dennis F. Andrews, Franco Gamero, Rudy Limpert
SHORT PAPER PCB 8-2006 OBLIQUE COLLISIONS ENGINEERING EQUATIONS, INPUT DATA AND MARC 1 APPLICATIONS By: Dennis F. Andrews, Franco Gamero, Rudy Limpert PC-BRAKE, INC. 2006 www.pcbrakeinc.com 1 PURPOSE OF
AC PRELIMINARY. All Terrain Crane 350 USt Capacity class
AC 3006 PRELIMINARY All Terrain Crane 350 USt Capacity class Contents AC 3006 Page: Dimensions... 4 Specifications... 6 Equipment... 7 Counterweight... 8 HA Main boom... 10 HAV Folding swingaway jib...
Virginia Department of Transportation
TEST REPORT FOR: Virginia Department of Transportation SKT SP 350 50 (15.24 m) System PREPARED FOR: Virginia Department of Transportation 1401 E. Broad St. Richmond, VA 23219 TEST REPORT NUMBER: REPORT
Potential Use of Crash Test Data for Crashworthiness Research
Potential Use of Crash Test Data for Crashworthiness Research M Paine* and M Griffiths** * Vehicle Design and Research Pty Ltd, Beacon Hill NSW, Australia. ** Road Safety Solutions Pty Ltd, Caringbah NSW,
Crash pulse simulation on car and sled test facilities capable for upgrade of existing facilities
Servo-Hydraulic Brake System for Sled Tests Code 2MC Since 1968 Fig. 1: HydroBrake System integrated in impact block. Crash pulse simulation on car and sled test facilities capable for upgrade of existing
A Comparison of Crush Stiffness Characteristics from Partial-Overlap and Full-Overlap Frontal Crash Tests
1999-01-0105 A Comparison of Stiffness Characteristics from Partial-Overlap and Full-Overlap Frontal Crash Tests James A. Neptune Neptune ering, Inc. Copyright 1999 Society of Automotive ers, Inc. ABSTRACT
Test Stand For Air Turbine Starters >TATS4<
Test Stand For Air Turbine Starters HYDRAULICS / PNEUMATICS The test stand is developed for testing the characteristics of Air Turbine Starters, such as e.g.: pressure, flow, temperature, rotational speed
Implementation of Rolling Resistance in R117
Implementation of Rolling Resistance in R117 Tyre Rolling Resistance Rolling Resistance measuring methods Calibration of RR Machines Questions raised during GRB meeting July 23 1 Tyre Rolling Resistance
Active Safety Systems in Cars -Many semi-automated safety features are available today in new cars. -Building blocks for automated cars in the future.
Active Safety Systems in Cars -Many semi-automated safety features are available today in new cars. -Building blocks for automated cars in the future. Eugene A. Petersen Tire Program Manager-CR For over
CRASH TESTING OF RSA/K&C ANTI-RAM FOUNDATION BOLLARD PAD IN ACCORDANCE WITH U.S. DEPARTMENT OF STATE DIPLOMATIC SECURITY SD-STD-02.
CRASH TESTING OF RSA/K&C ANTI-RAM FOUNDATION BOLLARD PAD IN ACCORDANCE WITH U.S. DEPARTMENT OF STATE DIPLOMATIC SECURITY SD-STD-02.01 REVISION A Prepared for RSA Protective Technologies, LLC FINAL REPORT
SAFETY COMPLIANCE TESTING FOR FMVSS NO. 138 TIRE PRESSURE MONITORING SYSTEMS
REPORT NUMBER 138-STF-07-001 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 138 TIRE PRESSURE MONITORING SYSTEMS KIA MOTORS CORPORATION 2007 HYUNDAI ENTOURAGE FOUR-DOOR MPV NHTSA NO. C70504 U.S. DOT SAN ANGELO
AC (L) All Terrain Crane 120 USt Capacity class
AC 04 (L) All Terrain Crane USt Capacity class Contents AC 04 (L) Page: Dimensions... 4 Specifications... 6 Equipment... 7 Counterweight... 8 HA (HA50, HA60) Main boom... HAV (HA50, HA60) Folding swingaway
SAFETY COMPLIANCE TESTING FOR FMVSS NO. 138 TIRE PRESSURE MONITORING SYSTEMS
REPORT NUMBER 138-STF-10-008 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 138 TIRE PRESSURE MONITORING SYSTEMS CHRYSLER GROUP, LLC 2010 DODGE RAM 1500 CREW CAB TRUCK NHTSA NO. CA0303 U.S. DOT SAN ANGELO TEST
Fuel System Integrity
TECHNICAL STANDARDS DOCUMENT No. 301, Revision 2R Fuel System Integrity The text of this document is based on Federal Motor Vehicle Safety Standard No. 301, Fuel System Integrity, as published in the U.S.
Bicycle Hardware in the Loop Simulator for Braking Dynamics Assistance System
Bicycle Hardware in the Loop Simulator for Braking Dynamics Assistance System IPG Apply & Innovate 2016 Conference Session: Off Highway Cornelius Bott, Martin Pfeiffer, Oliver Maier, Jürgen Wrede 21.09.2016
Innovation. Dedication. Specialisation. Bliss-Fox by Panus-
\ Innovation. Dedication. Specialisation Bliss-Fox F1-500 operatated by Toll Dnata Airport Services Signapore Airlines A380-800 Aircraft Sydney Airport, 27 October 2007 \ Bliss-Fox by Panus- 2 Aircraft
SAFETY COMPLIANCE TESTING FOR FMVSS NO. 138 TIRE PRESSURE MONITORING SYSTEMS
REPORT NUMBER 138-STF-07-003 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 138 TIRE PRESSURE MONITORING SYSTEMS BAYERISCHE MOTOREN WERKE 2007 BMW X3 3.0si FOUR-DOOR MPV NHTSA NO. C70506 U.S. DOT SAN ANGELO TEST
ROBUST PROJECT Norwegian Public Roads Administration / Force Technology Norway AS
ROBUST PROJECT Norwegian Public Roads Administration / Force Technology Norway AS Evaluation of small car - RM_R1 - prepared by Politecnico di Milano Volume 1 of 1 January 2006 Doc. No.: ROBUST-5-002/TR-2004-0039
Headlight Test and Rating Protocol (Version I)
Headlight Test and Rating Protocol (Version I) February 2016 HEADLIGHT TEST AND RATING PROTOCOL (VERSION I) This document describes the Insurance Institute for Highway Safety (IIHS) headlight test and
6. Relevant safety standards in North America and Europe
6. Relevant safety standards in North America and Europe North American and European safety standards for vehicles are summarized in Table 6.1. While most of the standards in Table 6.1 are enacted by legislation,
Press-Hardened and Roll-Formed Lightweight Bumpers in Steels with Enhanced Strength
Press-Hardened and Roll-Formed Lightweight Bumpers in Steels with Enhanced Strength Johan Nilsson Gestamp GDIS2018 Abstract -Bumpers protect the BIW and external attributes in low speed collisions and
Crash test facility simulates frontal, rear-end and side collision with acceleration pulses of up to 65 g and 85 km/h (53 mph)
Johnson Controls invests 3 million Euro (2.43 million GBP) in state-of-theart crash test facility Crash test facility simulates frontal, rear-end and side collision with acceleration pulses of up to 65
The SIPS (Side Impact Protection System) includes side airbags and an Inflatable Curtain (IC) airbag that protects both front and rear occupants.
VOLVO XC70 SAFETY Like all Volvo models, the XC70 has been developed and extensively crash tested in the Volvo Safety Centre in Gothenburg, Sweden, and features a comprehensive safety package designed
U.S. DEPARTMENT OF TRANSPORTATION
TP214D-08 December 15, 2006 U.S. DEPARTMENT OF TRANSPORTATION NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION LABORATORY TEST PROCEDURE FOR FMVSS No. 214 DYNAMIC SIDE IMPACT PROTECTION ENFORCEMENT Office
ELECTRIC DIESEL AND OIL PUMPS
ELECTRIC DIESEL AND OIL PUMPS DC DIESEL PUMPS 78 AC DIESEL PUMPS 79 COMPACT ASSEMBLIES 80 DIESEL PUMP ACCESSORIES 81 ELECTRIC OIL PUMPS 82 ELECTRIC OIL PUMPS WITH ELECTRONIC PRESSURE SWITCH 83 EQUIPPED
S.C. IRUM S.A - ROMANIA
S.C. IRUM S.A - ROMANIA www.irum.ro GLOBAL NETWORK MAVIPROD GROUP MAVIPROD ROMANIA IRUM MAVIPROD HUNGARY MAVIPROD MOLDAVIA WHAT WE DO AND HOW? We make tractors. Based on more than half a century of experience,
EXTRACT of chapter XXXIV coupling devices (version of ) ANNEX XXXIV Requirements on mechanical couplings
EXTRACT of chapter XXXIV coupling devices (version of 18.09.2013) ANNEX XXXIV Requirements on mechanical couplings Definitions specific to this Annex Mechanical coupling between tractor and towed vehicle
Side Impact Crashworthiness Evaluation. Crash Test Protocol (Version VIII)
Side Impact Crashworthiness Evaluation Crash Test Protocol (Version VIII) July 2016 SIDE IMPACT CRASHWORTHINESS EVALUATION CRASH TEST PROTOCOL (VERSION VIII) Supporting documents for the Insurance Institute
SKE. Application example. Pneumatic Swivel Heads Universal Swivel Head. Torque 0.4 Nm Nm. Sizes Weight 0.13 kg.. 1.
SKE Sizes 18.. 55 Weight 0.13 kg.. 1.95 kg Axial force 140 N.. 2560 N Torque 0.4 Nm.. 9.0 Nm Bending moment 7.0 Nm.. 128 Nm Application example Robot gripper module for the removal and loading of a variety
SAFETY COMPLIANCE TESTING FOR FMVSS NO. 401 INTERIOR TRUNK RELEASE
REPORT NUMBER 401-STF-09-002 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 401 INTERIOR TRUNK RELEASE HYUNDAI MOTOR COMPANY 2009 HYUNDAI GENESIS FOUR-DOOR PASSENGER CAR NHTSA NO. C90501 U.S. DOT SAN ANGELO TEST
Pedestrian Autonomous Emergency Braking Test Protocol (Version II) February 2019
Pedestrian Autonomous Emergency Braking Test Protocol (Version II) February 2019 Contents DOCUMENT REVISION HISTORY... ii SUMMARY... 1 TEST ENVIRONMENT... 2 Surface and Markings... 2 Surroundings... 2
SAFETY COMPLIANCE TESTING FOR FMVSS NO. 401 INTERIOR TRUNK RELEASE
REPORT NUMBER 401-STF-09-001 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 401 INTERIOR TRUNK RELEASE GENERAL MOTORS CORPORATION 2009 CHEVROLET IMPALA FOUR-DOOR PASSENGER CAR NHTSA NO. C90100 U.S. DOT SAN ANGELO
The Center for Auto Safety
TEST REPORT FOR: The Center for Auto Safety 40 mph Vehicle to Vehicle 30% Offset Rear Impact 40 mph Vehicle to Vehicle 30% Offset Rear Impact 1996 Jeep Grand Cherokee Limited 1988 Ford Taurus PREPARED
EXPERIMENTAL TEST OF OCCUPANT ENTRAPMENT FORD TAURUS INTO REAR OF FORD EXPLORER 30% OFFSET, 70 MPH. Test Date: August 3, 2010
EXPERIMENTAL TEST OF OCCUPANT ENTRAPMENT FORD TAURUS INTO REAR OF FORD EXPLORER 30% OFFSET, 70 MPH Test Date: August 3, 2010 Final Report Date: September 25, 2010 SECTION 1 PURPOSE AND SUMMARY OF TEST
GLOBAL ORGANIZATION - LOCAL SUPPORT TESTING EQUIPMENT
GLOBAL ORGANIZATION - LOCAL SUPPORT TESTING EQUIPMENT CONTENTS Page Introduction 3 Endurance tester for passenger car & truck tires 4 Force and moment tester for passenger car & truck tires 5 Six position
Car Safety Features Exploration and Essay
1 Car Safety Features Exploration and Essay Task: One of the biggest technological advances in the development of automobiles is the vast number of safety features now available in even the least expensive
The Center for Auto Safety
TEST REPORT FOR: The Center for Auto Safety 50 mph Vehicle to Vehicle 30% Offset Rear Impact 50 mph Vehicle to Vehicle 30% Offset Rear Impact 1999 Jeep Grand Cherokee Laredo 1987 Ford Taurus PREPARED FOR:
GENERAL TESTING LABORATORIES, INC LEEDSTOWN ROAD COLONIAL BEACH, VIRGINIA 22443
REPORT NUMBER 202a-GTL-10-004 SAFETY COMPLIANCE TESTING FOR S HEAD RESTRAINTS STATIC REQUIREMENTS VOLVO CAR CORPORATION 2010 VOLVO S40, PASSENGER CAR NHTSA NO. CA5900 GENERAL TESTING LABORATORIES, INC.
Some selected methods and purpose of the low speed tests for estimation of the vehicle bumpers vulnerability to damage
Some selected methods and purpose of the low speed tests for estimation of the vehicle bumpers vulnerability to damage Wybrane metody oraz cel badań zderzaków samochodowych w aspekcie testów zderzeniowych
November 16, 1998 Refer to: HNG-14. Mr. David Allardyce Mechanical Engineer B&B Electromatic Main Street Norwood, Louisiana 70761
November 16, 1998 Refer to: HNG-14 Mr. David Allardyce Mechanical Engineer B&B Electromatic 14113 Main Street Norwood, Louisiana 70761 Dear Mr. Allardyce: In your August 31 letter, you presented some preliminary
DESIGN, ANALYSIS AND FABRICATION OF BRAKING SYSTEM WITH REAR INBOARD BRAKES IN BAJA ATV
DESIGN, ANALYSIS AND FABRICATION OF BRAKING SYSTEM WITH REAR INBOARD BRAKES IN BAJA ATV Aman Sharma 1, Prakhar Amrute 2, Suryakant Singh Thakur 3, Jatin Shrivastav 4 1,2,3,4Department of Mechanical Engineering,
Gripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
TADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m
DATE July, 2006 TADANO TRUCK CRANE MODEL : TL-300E Provisional Specifications GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5 m 33.0 m DIMENSION MASS Overall length approx. 12,670 mm
Design Analysis and Optimization of Disc Brake
Design Analysis and Optimization of Disc Brake Assembly of A 4- Wheeler Race C ar Avijit Singh Gangwar B.E. Automobile Engineer Manipal Institute Of Technology Abstract-A disc brake is a wheel brake which
Jaroslav Maly & team CAE departament. AV ENGINEERING, a.s.
Design & Simulation of one axle trailer loading by 6 or 7 passenger cars - Virtual Product Development Jaroslav Maly & team CAE departament www.aveng.com Pro/ENGINEER design optimization of axle trailer
Newton s 2 nd Law Activity
Newton s 2 nd Law Activity Purpose Students will begin exploring the reason the tension of a string connecting a hanging mass to an object will be different depending on whether the object is stationary
epsilon Structural Design of Body and Battery Housing
ALIVE, ENLIGHT & epsilon Final Workshop epsilon Structural Design of Body and Battery Housing Aachen, 22 September 2016 Dipl.-Ing. Johannes Stein Institute for Automotive Engineering Johannes Stein / Final
this is the start of something big. start Nissan LEAF
TM 2012 LEAF It s a new day. And your garage is the new filling station. So charge at home and enjoy up to 100 miles, using no gas and releasing zero emissions. 1 It s time. disclaimer this is the start
TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m
TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245 mm Overall width
Low-Speed Crash Test Protocol (Version V) May 2002
Low-Speed Crash Test Protocol (Version V) May 2002 Insurance Institute for Highway Safety Low-Speed Crash Test Protocol (Version V) Low-Speed Test Configurations Four different low-speed crash tests, at
Lift Accessories. For Hunter Wheel Alignment Lift Racks
Lift Accessories For Hunter Wheel Alignment Lift Racks Fully Integrated Alignment RX-Series & L441 / L444 Lifts Hunter lifts with FIA capabilites streamline the entire alignment process. Direct communication
TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA
SPEC. SHEET No. GR-7E-1-214/EU-51 DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-7EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY BOOM 7, kg at 3. m 5-section, 11.5 m 44. m DIMENSION Overall
AC All Terrain Crane 300 USt Capacity class
AC 2505 All Terrain Crane 300 USt Capacity class Contents AC 2505 Page: Dimensions... 4 Specifications... 6 Equipment... 7 Counterweight... 8 HA Main boom... 9 HAV Folding swingaway jib... 22 HAVVA Variable
A Brake Pad Wear Control Algorithm for Electronic Brake System
Advanced Materials Research Online: 2013-05-14 ISSN: 1662-8985, Vols. 694-697, pp 2099-2105 doi:10.4028/www.scientific.net/amr.694-697.2099 2013 Trans Tech Publications, Switzerland A Brake Pad Wear Control
AC All Terrain Crane
All Terrain Crane 300UST CAPACITY CLASS CONTENTS Page: Dimensions... 4 Specifications... 6 Equipment... 7 Counterweight... 8 HA Main boom... 9 HAV Folding swingaway jib... 22 HAVVA Variable extension with
Owner s Manual. Rigid Mount Weld-on Drawbars. XL-DB20016UM-en-US Rev
Owner s Manual Rigid Mount Weld-on Drawbars Installation, Operation and Maintenance Procedures For on/off-road applications Weight: DB-1400 (approx.) 14 lbs. (6.35 kg) DB-1422 (approx.) 11 lbs. (4.98 kg)
SPECIAL TECHNICAL PRESENTATION. Oklahoma City, Ok April 2012
SPECIAL TECHNICAL PRESENTATION Oklahoma City, Ok April 2012 How governmentregulations will affect your body shop business? What is CAFÉ? CAFÉ stands for Corporate Average Fuel Economy What are the CAFÉ
Design and Analysis of suspension system components
Design and Analysis of suspension system components Manohar Gade 1, Rayees Shaikh 2, Deepak Bijamwar 3, Shubham Jambale 4, Vikram Kulkarni 5 1 Student, Department of Mechanical Engineering, D Y Patil college
SAFETY COMPLIANCE TESTING FOR FMVSS NO. 110 TIRE SELECTION AND RIMS
REPORT NUMBER 110-STF-08-001 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 110 TIRE SELECTION AND RIMS HONDA MOTOR COMPANY 2008 ACURA RDX FOUR-DOOR MPV NHTSA NO. C85300 U.S. DOT SAN ANGELO TEST FACILITY 131
mechanics LES functional overview LES 4 LES 6 LES 5
LES functional overview LES 4 Overview B-36 B-38 with spindle drive LES 6 B-40 with spindle drive LES 5 B-42 with spindle drive Combination examples Motor modules Clutch housing Motor leads Installation
Skid against Curb simulation using Abaqus/Explicit
Visit the SIMULIA Resource Center for more customer examples. Skid against Curb simulation using Abaqus/Explicit Dipl.-Ing. A. Lepold (FORD), Dipl.-Ing. T. Kroschwald (TECOSIM) Abstract: Skid a full vehicle
EFG 540k S50. Electric Four-Wheel Counterbalanced Trucks (8,000 11,000 lbs.) Broad capacity range for enhanced flexibility
Broad capacity range for enhanced flexibility High performance and high energy efficiency with advanced AC technology Compact design for increased operation cycles Ergonomic and easily adjustable operator
SPMM OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000?
SPMM 5000 OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000? The Suspension Parameter Measuring Machine (SPMM) is designed to measure the quasi-static suspension characteristics that are important
GALLATIN PUBLIC UTILITIES
GALLATIN PUBLIC UTILITIES Bid Proposal Item: Single Axle Dump Truck Bid Date: Company Address: Phone Number: Manufacturer: Bid Information (1) Prices F.O.B., 249 Hancock Street, Gallatin, Tennessee 37066.
DESIGN, SIMULATION AND TESTING OF SHRIMP ROVER USING RECURDYN
Ready 12th Symposium on Advance Space Technologies in Robotics and Automation, ESA / ESTEC, Noordwijk, The Nethelands DESIGN, SIMULATION AND TESTING OF SHRIMP ROVER USING RECURDYN Shivesh Kumar, Raghavendra
TADANO ROUGH TERRAIN CRANE. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m
DATE July, 2004 TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION Overall length approx. 11,245 mm
PARALLEL INDEX DRIVES TP Series
PARALLEL INDEX DRIVES TP Series Calculations J = moment of inertia Application examples Direct driven belt/chain = M B + M B M B = c a n 2π n x t² M R = µ g R m = M B + M R + (M ST )* M ST = m g R M AN
Honda HR-V 79% 86% 72% 71% SPECIFICATION SAFETY EQUIPMENT TEST RESULTS. Small Family Car. Child Occupant. Adult Occupant. Safety Assist.
Honda HR-V Small Family Car 2015 Adult Occupant Child Occupant 86% 79% Pedestrian Safety Assist 72% 71% SPECIFICATION Tested Model Body Type Honda HR-V 1.6 'ES', RHD 5 door hatchback Year Of Publication
Above ground two-post, four-post, mid-rise vehicle. and motorcycle service lifts for repair facilities
Above ground two-post, four-post, mid-rise vehicle and motorcycle service lifts for repair facilities AND VALIDATED RTP10 Two-Post Lift / 10,000 lbs. capacity Versatile RTP10 with SPOT-RITE TM Arms - technicians
*Shown with optional high pressure blowers
*Shown with optional high pressure blowers SUPERFLOW CYCLEDYN WITH CYCLEDYN YOU CAN The SuperFlow CycleDyn is a chassis dynamometer system, which means that you can select the appropriate Run tests with
Mobile crane LTM Max. lifting capacity: 35 t Max. lifting height: Max. working radius: 40 m. Courtesy of Crane.Market
Mobile crane Max. lifting capacity: 35 t Max. lifting height: 44 m Max. working radius: 40 m Mobile crane Compact and economic 2 A long telescopic boom, high capacities, an extraordinary mobility as well