Larson Systems Inc. ASSP with SFM s & 3 Way Sorter

Transcription

1 Larson Systems Inc. ASSP with SFM s & 3 Way Sorter Automatic Spring Sorting Package With Presetter, Super Force Meters & Three Way Sorter

2 Rev y RRS ASSP with SFM's and Three Way Sorter Date Description A Parts List A RRS Add items 16 & 17, renumbered Item #8 qty is 14 was 10, Add page 3 & 4 Item Qty Part Number Rev Part Name PC Location Part Length 1 Ref C Load/Presetting Station lb, 5" Stroke, 9" Range /4-20 X 5/8 SHCS /16-18 X 2 1/2 SHCS J Indexer Assembly Standoff, Three way sorter, ASSP A Table Top, ASSP 7 Ref A Super Force Meter ASSP Left mounting /4-20 X 1/2 HSCS 9 Ref A Super Force Meter ASSP Right mounting F SYSTEM CONTROL OX - INDEXER COMPUTER/TOUCH PANEL MOUNT WELDMENT, /16-18 X 3/4 SHCS END CAP 2" SQUARE Inside Dim A Pneumatics (120 VAC) Assembly, ARK Tech. 3 way Lower Assembly, ASSP /4-20 X 2 1/4 SHCS racket, Pnuematic Valves ASSP in Rack Weldment /16-18 X 5/8 FHSCS Sorter in Assembly /4-20 X 1/2 SHCS Grommet,.625 ID.125" panel thickness 23 Ref D MC Way Air Powered Sorter, ASSP (No 24 Ref A ASSP SFM Load Cell, 11 lb, Ø 3.00" Platform 24 Ref A ASSP SFM Load Cell, 66 lb, Ø 3.00" Platform SPRING SUPPORT TALE, Ark Tech. 26 Ref W Indexer Plate Assembly, 16 station, ".5 ID MIN x 2.00" 27 Ref A ASSP - Power head with linear scale ASSP COMPUTER TOWER COVER PLATE X 3/8 HSCS Approved by: SEE ATTACHED 4 DRAWINGS Date: Printed on , 4:05:01 PM by TLS Page 5 of 6

3 Rev y RRS ASSP with SFM's and Three Way Sorter Date Description A Parts List A RRS Add items 16 & 17, renumbered Item #8 qty is 14 was 10, Add page 3 & 4 Item Qty Part Number Rev Part Name PC Location Part Length A Power Control ox Assem, ARK TECH, w/ 3 way sorter X 1 3/4 SHCS Filter, Regulator, Lubricater /4" NPTF, 1/4" MALE QUICK DISCONNECT Grommet,.3125 ID.125" panel thickness /18-16 X 1/2" SHCS /8" FLAT WASHERS Flexible Desk Grommet Sticker Assembly - ASSP with SFM and 3 Way Sorter 39 Ref A Schematic ASSP, Ark Tech. Three place sorter Approved by: SEE ATTACHED 4 DRAWINGS Date: Printed on , 4:05:01 PM by TLS Page 6 of 6

4 REV DATE DESCRIPTION DRW APP APPROVALS DRAWN APP. APP. RRS DATE 10/11/ altimore St. NE Mpls., MN DWG. NO. SCALE: NONE LARSON SYSTEMS INC A PH FAX ASSP with Three position Sorter REV: SHEET 1 OF 6

5 SCALE: NONE LARSON SYSTEMS INC altimore St. NE Mpls., MN DWG. NO. PH FAX A SHEET 2 OF 6

6 ASSEMLY NOTES: 1. Locate item 4 (Indexer Assembly) onto item 6 (Table Top). 2. Install item 25 (Spring Support Table). 3. Top surface of item 25 is to be set below the top surface of item 4 with a.050 clearance. 4. Shorten legs of item 25 ( ) to create this clearance A LARSON SYSTEMS INC altimore St. NE Mpls., MN PH FAX SCALE: NONE DWG. NO A SHEET 3 OF 6

7 LOAD CELL ASSEMLY NOTES: 1. Set item 25 to the proper height (Page 3). 2. Platform of item 24 (Load Cell) is to be set.005 clearance below the top surface of item 25 (Spring Support Table). 3. Shorten the standoffs in item 24 ( ) to create this clearance LARSON SYSTEMS INC altimore St. NE Mpls., MN PH FAX SCALE: NONE DWG. NO A SHEET 4 OF 6

8 DRW REV. DATE DESCRIPTION APPROVED Label Label 2 1 Note: Item 2 is included with item APPROVALS DRAWN APPR. APPR. SMH DATE 4/13/02 LARSON SYSTEMS INC altimore St. NE PH Mpls., MN FAX DWG. NO. Load Station, 5" Stroke C SCALE: NONE SHEET 1 OF 2

9 Rev y DAL Date Description C Parts List Load/Presetting Station lb, 5" Stroke, 9" Range A SMH SGS C DAL was ADD ITEM #15-16 Add item 2 & 3, Revised alloon Numbers Item Qty Part Number Rev Part Name PC Location Part Length Load Station Platform /4-16 UNF-2 Nut (imba D3556) FLOW CONTROL, 1/8 NPTM x 1/4 Tube Air Cylinder 1.25 dia bore x 5" stroke MOUNT RACKET, CYLINDER COUPLING NUT 7/16-20 TO 7/ Load Station Safety Shield, 5" Stroke, 15"L X 1/4 SHCS /16-20 Jam Nut (black finish) Adjustable Stop Nut THREADED STOP ROD, L Adjustable Stop lock, L Adjustable Handle ASSP ADJ. HANDLE STAND OFF /4" FLAT WASHER - ZINC A PRESET STATION STAND, 18"L, ASSP mount Instruction Label for Pneumatic Safety Cover lue ASSP/SFM Load Station Warning Label Stand base to Cyinder Centerline is Set for Assp (Ref 4.125) Approved by: SEE ATTACHED DRAWING Date: Printed on , 5:28:34 PM by DAL November 1, 2013 Page 2 of 2

10 REV DATE DESCRIPTION DRW APP NOTE 1. GRIND ITEM #16 FOR 0/.0003" OF END PLAY ON ITEM #31 AND ITEMS 14, 15, 16, 17, 18, (GEAR ASSEMLY). 2. GRIND ITEM #39 FOR 0/.0003" OF END PLAY ON ITEM #41 3. SNUG ITEM #2 AND ADJUST ITEMS #33 TO ROTATE ITEM 31 AND REDUCE ACKLASH OF ITEM #41 TO A MINIMUM. THEN TIGHTEN ITEM #2 4. INSTALL ITEM#25 AND ADJUST ALIGNMENT AFTER STEP APPLY RTV (GASKET SEAL) TO ITEM #9 AT ASSEMLY GRIND AT ASSEMLY ADJUST TO REDUCE ACKLASH ALIGN AFTER ACKLASH IS SET TORQUE TO 40 FT-L THIN THICK APPROVALS DRAWN APP. APP. SMH DATE 6/21/01 LARSON SYSTEMS INC altimore St. NE Mpls., MN DWG. NO. SCALE: NONE Indexer Assembly J PH FAX REV: SHEET 1 OF 3

11 Indexer Assembly Parts List Rev y Date Description F SMH Redesigned drive assembly, removed items that are now on assembly, redrawn on solidworks, drawing was 3 sheets G KMP Fix Assy Drawing J H DAL remove o-rings from #27 J RRS Item 21 is was , item 22 is was , add item 20, item 28 qty is 2 was 1 Item 23 was Item Qty Part Number Rev Part Name PC Location Part Length /4 DIA. X 1 3/8 DP /8-16 X 1 3/4 SHCS X 1/2 SHCS EARING DUST CAP X 1 SHCS H- 05 LOCKING NUT Whittet-Higgins A 1/4 Square Key 1.25 LENGTH Worm Gear Mods A HOUSING OIL COVER X 3/8 SSS X 1/2 FHSCS /4-20 X 5/8 SHCS /8 NPT PLUG Thrust Washer, 1/2 x 15/16 x.031 TRA Thrust Washer, 1/2 x 15/16 x C Worm Spacer (1300 In-lb) Worm 12dp Single NeedleThrust earing all earing Low Clearance External Retaining Ring AKM23D SERVO Motor X 5/8 SHCS X 1 1/4 SHCS #10 Flat WASHER - CUT IRON E INDEXER MOTOR MOUNTING FLANGE A Flexible coupling assembly OIL SEAL O-RING 9452K INDEXER WORM SHAFT E Key 1/8 X 1/8 X 1.00 Uses about 2 quarts of item 45 Approved by: SEE ATTACHED DRAWING Date: Printed on , 8:44:49 AM by RRS Page 2 of 3

12 Indexer Assembly Parts List Rev y Date Description F SMH Redesigned drive assembly, removed items that are now on assembly, redrawn on solidworks, drawing was 3 sheets G KMP Fix Assy Drawing J H DAL remove o-rings from #27 J RRS Item 21 is was , item 22 is was , add item 20, item 28 qty is 2 was 1 Item 23 was Item Qty Part Number Rev Part Name PC Location Part Length INDEXER WORM HOUSING F INDEXER WORM HOUSING /4-28 X 3/4 SSS (FLAT PT) SUPPORT POST MODIFIED C SWITCH MOUNT RACKET 36 Ref Proximity Switch w/cable /4-28 Grease Fitting INDEXER EARING HOUSING PRE-LOAD USHING earing, Fafnir 7205w C INDEXER SHAFT /2-13 X 2" THREADED ROD /16 X 1.00" ROLL PIN Speed all Handle 1/ ref DTE Light 5 gal Uses about 2 quarts of item 45 Approved by: SEE ATTACHED DRAWING Date: Printed on , 8:44:49 AM by RRS Page 3 of 3

13 REV DATE DESCRIPTION DRW APP LEFT MOUNTING RIGHT MOUNTING 5 APPROVALS DRAWN SGS APP. APP. DATE 7/8/08 LARSON SYSTEMS INC altimore St. NE PH Mpls., MN FAX Super Force Meter ASSP DWG. NO & -08A REV: SCALE: NONE SHEET 1 OF 2 -

14 Rev y KMP Super Force Meter ASSP Left mounting Date Description A Parts List A RRS Item 6 is was , Add items 2, 3 & 4. Add -08 Item Qty Part Number Rev Part Name PC Location Part Length X 1/4 HCS X 1/4 HCS Encoder Cover, FDHT 1500 Force Meter Enclosure Cover, Force Meter E SMART CELL CALE ASSEMLY, SDHT A Enclosure, Force Meter, ASSP, left mount Front Panel Assembly - SDHT - ASSP SDHT3 EXPANSION OARD Assembly - ASSP Female Screw Lock ack Label - SFM on ASSP Approved by: SEE ATTACHED DRAWING Date: Printed on , 5:26:32 PM by DAL October 16, 2013 Page 2 of 2

15 Rev y KMP Super Force Meter ASSP Right mounting Date Description A Parts List A RRS Item 6 is was , Add items 2, 3 & 4. Add -08 Item Qty Part Number Rev Part Name PC Location Part Length X 1/4 HCS X 1/4 HCS Encoder Cover, FDHT 1500 Force Meter Enclosure Cover, Force Meter E SMART CELL CALE ASSEMLY, SDHT A Enclosure, Force Meter, ASSP, Right mount Front Panel Assembly - SDHT - ASSP SDHT3 EXPANSION OARD Assembly - ASSP Female Screw Lock ack Label - SFM on ASSP Approved by: SEE ATTACHED DRAWING Date: Printed on , 5:27:30 PM by DAL October 16, 2013 Page 2 of 2

16 A SUPPLY 5 9 #2 TEST #1 TEST STATION STATION PRESET STATION FLAP 1 (E) FLAP 1 (R) FLAP 2 (R) FLAP 2 (E) TEST 2 (E) TEST 2 (R) TEST 1 (E) TEST 1 (R) PRESET (E) PRESET (R) 1 FLAP 1 FLAP 2 1/8 TUING 1/8 TUING 1/8 TUING 1/8 TUING FLAP 1 (E) FLAP 1 (R) FLAP 2 (R) FLAP 2 (E) TEST 2 1/4 TUING 1/4 TUING TEST 2 (E) TEST 2 (R) TEST 1 1/4 TUING 1/4 TUING TEST 1 (E) TEST 1 (R) PRESET 1/4 TUING 1/4 TUING PRESET (E) PRESET (R) NOTES: 1) TUING LINE AND VALVE STATIONS TO E LAELED AS SHOWN 2) ROUTE TUING TO AVOID TUING WEAR AND ANY CONTACT TO MOVEMENT. 3) Max input air pressure 150 PSI 4) Set regulator to suit (40-85 PSI) A 5) Test to confirm presetting station will apply and hold position at 85 psi APPROVALS DRAWN APP. APP. RRS DATE 10/16/ altimore St. NE Mpls., MN A PH FAX Pneumatics (120 VAC) Assembly, ASSP 3 Way Sorter DWG. NO. SCALE: NONE LARSON SYSTEMS INC. REV: SHEET 1 OF 2

17

18 2 REV DATE DESCRIPTION DRW APP UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE: LARSON SYSTEMS INC..XX.01.XXX altimore St. NE PH Mpls., MN FAX MATERIAL See Parts List APPROVALS DATE FINISH DRAWN RRS 10/10/13 ASSP - Lower Assembly None APP. DWG. NO. REV: HEAT TREAT - APP. SCALE: NONE SHEET 1 OF 2

19 Rev y RRS Lower Assembly, ASSP Date Description Parts List Item Qty Part Number Rev Part Name PC Location Part Length ase Assembely Stand Weldment, ASSP Enclosure Panel, ASSP /4-20 X 1/2 HSCS /4-20 X 1/2 SHCS Access Panel ASSP LEVELING FEET /2-13 Hex Nut Access Panel ASSP Approved by: SEE ATTACHED DRAWING Date: Printed on , 2:42:24 PM by DAL October 16, 2013 Page 2 of 2

20 REV DATE DESCRIPTION DRW APP NOTE 1. GRIND ALL WELDS SMOOTH UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE:.XX.01.XXX.005 MATERIAL See Parts List FINISH lack Paint HEAT TREAT APPROVALS DRAWN APP. APP. RRS DATE 10/03/13 SCALE: NONE LARSON SYSTEMS INC altimore St. NE Mpls., MN DWG. NO. in Rack Weldment PH FAX REV: SHEET 1 OF 2

21 Rev y RRS in Rack Weldment Date Description Parts List Item Qty Part Number Rev Part Name PC Location Part Length ack Strap, 3 place sorter rack Angled support, 3 place sorter rack Strap, 3 place sorter rack ottom locating Strap, 3 place sorter rack End Strap, 3 place sorter rack Vertical strap, 3 place sorter rack Approved by: SEE ATTACHED DRAWING Date: Printed on , 6:03:08 PM by DAL November 1, 2013 Page 2 of 2

22 REV DATE DESCRIPTION DRW APP LARSON SYSTEMS INC altimore St. NE PH Mpls., MN FAX APPROVALS DRAWN RRS APP. APP. DATE 10/10/13 Sorter in DWG. NO SCALE: NONE REV: SHEET 1 OF 2

23 Rev y RRS Sorter in Assembly Date Description Parts List Item Qty Part Number Rev Part Name PC Location Part Length X 1/4 HSCS, SST SORTER IN PULL HANDLE, OVAL (SORTER IN) Approved by: SEE ATTACHED DRAWING Date: Printed on , 5:11:39 PM by DAL October 16, 2013 Page 2 of 2

24 -00, -01, -02, -07 REV DATE DESCRIPTION DRW APP LARSON SYSTEMS INC altimore St. NE Mpls., MN PH FAX APPROVALS DRAWN APP. APP. RRS DATE 03/20/13 DWG. NO. SCALE: NONE MC Way sorter XXD REV: SHEET 1 OF 5

25 -03, LARSON SYSTEMS INC altimore St. NE Mpls., MN PH FAX SCALE: NONE DWG. NO XXD SHEET 2 OF 5

26 LARSON SYSTEMS INC altimore St. NE Mpls., MN PH FAX SCALE: NONE DWG. NO XXD SHEET 3 OF 5

27 Rev y Date Description A DAL Revised to manufacture by LSI Parts List MC Way Air Powered Sorter, ASSP (No D DAL C RRS D RRS #330 was qty 2 is 1, #360, 361, 362, Corrected tubing lengths, added # combined & renumbered Add -07 Item Qty Part Number Rev Part Name PC Location Part Length MC46 FUNNEL MC46-3 FLAPPER PAD X 3/8 FLAT HD SOCKET, K.OX MC46-3 TUE WITHOUT PEM STUDS MC46-3 FLAPPER, SOLID X 1/8 HSCS lack Oxide A MC46-3 DEFLECTOR, NON-PERFORATED X 1/4 HEAD TORX CAP LK OX /4" WASHER.255ID,.468OD MIL SPEC, MC EARING, CLIP, IGUS, LUED PLASTIC MC46-3 ACTUATOR ASSY RT, CYLINDERS ON Flow Control, 10/32 X 1/8 Tube MC46-3 ACTUATOR ASSY LT, CYLINDERS ON AIR CYLINDER, Ø2.0 x 1" STROKE, 5/16 ORE SCREW 4-40, 1/8 SHOULDER,.375, SST A Spacer 3/8 dia x.14 dia x.160 thick Cable Clamp, 5/8 Dia X 1/4 HSCS, SST Cable Voltage Label - 24 VDC 27 ref Loctite 242 (lue) Medium Strength MC46 3 Way Sorter Label 29 ref Assembly Instructions for MC46-3 Mini Chute Final 30 ref TEST: MC46-3 MINI SORTING CHUTE, 24VDC User Manual - MC46-3 Way Sorting Chute 32 Ref Pneumatics (24 VDC) Assembly, ARK Tech. 3 way Approved by: SEE ATTACHED 3 DRAWINGS Date: Printed on , 11:51:38 AM by RRS Page 4 of 4

28 XX DESCRIPTION ITEM 5 ITEM 6 DESCRIPTION lbs lbs, Ø3.00 Platform lbs lbs, Ø3.00 Platform lbs lbs, Ø3.00 Platform lbs lbs, Ø3.00 Platform lbs lbs, Ø3.00 Platform lbs lbs, Ø3.00 Platform lbs lbs, Ø1.00 Platform lbs lbs, Ø1.00 Platform lbs lbs, Ø1.00, Platform lbs lbs, Ø1.00, Platform lbs lbs, Ø1.00 Platform lbs lbs, Ø1.00 Platform REV. DATE DESCRIPTION A 4/29/02 ADDED -06 THRU -11, ADDED ITEM 6 AND DESCRIPTION TO TALE NOTE 1. SET OVERLOAD STOP AT ASSEMLY 2. ITEM 13 TO E LOCTITED INTO ITEM 6 APPROXIMATELY HALF WAY 3. IF WIRE COLORS CHANGE USE EXC/SIG CONVENTION LAELED ON LOAD CELL, THEN CHECK PER NOTE #5 4. LARSON SYSTEM'S USE OF SIG/EXC IS PER "LEOW" CONVENTION, IE. COMPRESSIVE FORCE GIVES A NEGATIVE VOLTAGE OUTPUT 5. TO CHECK WIRING CONVENTION CONNECT TO A LARSON FORCE METER THEN USE A VOLT METER ATTACHED PER CHART FIRST CHECK EXCITATION VOLTAGE, (RED ON #2, LACK ON #1) MUST E +5V. MUST NOT E -VOLTAGE. SECOND CHECK OUTPUT, (RED ON #4, LACK ON #3) APPLY COMPRESSIVE LOAD AND THE VOLTAGE SHOULD E MORE NEGATIVE. VOLTAGE MUST NOT GO MORE POSITIVE WITH COMPRESSIVE LOAD THIRD CHECK OUTPUT WITH NO LOAD, VOLTAGE SHOULD E.001 VDC > VOLTAGE > VDC DRW SMH APPROVED PIN LENGTH TO SUIT ASSEMLY TEDEA LOAD CELL WIRE COLOR PIN # + EXC/INPUT GREEN #2 - EXC/INPUT LACK #1 - SIG/OUTPUT WHITE #4 + SIG/OUTPUT RED #3 5 3 LOAD CELL VOLT METER WIRES SMART CONNECTOR PIN # + EXC /INPUT RED #2 - EXC/INPUT LACK #1 + SIG/OUTPUT RED #4 - SIG/OUTPUT LACK # NOTE 1. ANY WIRES THAT ARE NOT USED ARE TO E CUT OFF AND FOLDED ACK ONTO THE INSULATION, THEN COVERED WITH THE SHRINK TUING. THESE WIRES MUST NOT TOUCH. REFER TO DETAIL A DETAIL A UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE:.XX.01.XXX.005 MATERIAL FINISH HEAT TREAT APPROVALS DRAWN APPR. APPR. SMH DATE 4/16/02 LARSON SYSTEMS INC altimore St. NE PH Mpls., MN FAX ASSP Loadcell Assembly DWG. NO XXA SCALE: NONE SHEET 1 OF 2

29 Rev y SMH ASSP SFM Load Cell, 11 lb, Ø 3.00" Platform Date Description A Parts List A SMH added 06 thru -11, added Item 6 and description to table Item Qty Part Number Rev Part Name PC Location Part Length Load Cell Standoff A ASSP 200 Lb Load Cell ase Overload Stops, 50 & 100 lb Load Cell for Lower Platform Mount Load Cell - 11 lb (5 kg) Load Cell 3.00" Platform A Smart Cell Connector Assembly 8 AR C Shim ID, OD, thick /4-20 X 3/4 SHCS X 3/4 SHCS /16-18 X 3 1/2 SHCS /4 X 1/2 SHSS, SHOULDER SCREW 10-24TH /16-18 X 5/8 SSS /4-20 X 7/8 SHCS 15 Approved by: SEE ATTACHED DRAWING Date: Printed on , 10:37:28 AM by DAL July 15, 2008 Page 2 of 2

30 XX DESCRIPTION ITEM 5 ITEM 6 DESCRIPTION lbs lbs, Ø3.00 Platform lbs lbs, Ø3.00 Platform lbs lbs, Ø3.00 Platform lbs lbs, Ø3.00 Platform lbs lbs, Ø3.00 Platform lbs lbs, Ø3.00 Platform lbs lbs, Ø1.00 Platform lbs lbs, Ø1.00 Platform lbs lbs, Ø1.00, Platform lbs lbs, Ø1.00, Platform lbs lbs, Ø1.00 Platform lbs lbs, Ø1.00 Platform REV. A DATE DESCRIPTION 4/29/02 ADDED -06 THRU -11, ADDED ITEM 6 AND DESCRIPTION TO TALE NOTE 1. SET OVERLOAD STOP AT ASSEMLY 2. ITEM 13 TO E LOCTITED INTO ITEM 6 APPROXIMATELY HALF WAY 3. IF WIRE COLORS CHANGE USE EXC/SIG CONVENTION LAELED ON LOAD CELL, THEN CHECK PER NOTE #5 4. LARSON SYSTEM'S USE OF SIG/EXC IS PER "LEOW" CONVENTION, IE. COMPRESSIVE FORCE GIVES A NEGATIVE VOLTAGE OUTPUT 5. TO CHECK WIRING CONVENTION CONNECT TO A LARSON FORCE METER THEN USE A VOLT METER ATTACHED PER CHART FIRST CHECK EXCITATION VOLTAGE, (RED ON #2, LACK ON #1) MUST E +5V. MUST NOT E -VOLTAGE. SECOND CHECK OUTPUT, (RED ON #4, LACK ON #3) APPLY COMPRESSIVE LOAD AND THE VOLTAGE SHOULD E MORE NEGATIVE. VOLTAGE MUST NOT GO MORE POSITIVE WITH COMPRESSIVE LOAD THIRD CHECK OUTPUT WITH NO LOAD, VOLTAGE SHOULD E.001 VDC > VOLTAGE > VDC DRW SMH APPROVED PIN TEDEA LOAD CELL WIRE COLOR PIN # + EXC/INPUT GREEN #2 - EXC/INPUT LACK #1 - SIG/OUTPUT WHITE #4 + SIG/OUTPUT RED # LOAD CELL VOLT METER WIRES SMART CONNECTOR PIN # + EXC /INPUT RED #2 - EXC/INPUT LACK #1 + SIG/OUTPUT RED #4 - SIG/OUTPUT LACK # NOTE 1. ANY WIRES THAT ARE NOT USED ARE TO E CUT OFF AND FOLDED ACK ONTO THE INSULATION, THEN COVERED WITH THE SHRINK TUING. THESE WIRES MUST NOT TOUCH. REFER TO DETAIL A DETAIL A UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE:.XX.01.XXX.005 MATERIAL FINISH HEAT TREAT APPROVALS DRAWN APPR. APPR. SMH DATE 4/16/02 LARSON SYSTEMS INC altimore St. NE PH Mpls., MN FAX ASSP Loadcell Assembly DWG. NO XXA SCALE: NONE SHEET 1 OF 2

31 Rev y SMH ASSP SFM Load Cell, 66 lb, Ø 3.00" Platform Date Description A Parts List A SMH added 06 thru -11, added Item 6 and description to table Item Qty Part Number Rev Part Name PC Location Part Length Load Cell Standoff A ASSP 200 Lb Load Cell ase Overload Stops, 50 & 100 lb Load Cell for Lower Platform Mount Load Cell - 66 lb (30 kg) Load Cell 3.00" Platform 7 Ref A Smart Cell Connector Assembly 8 AR C Shim ID, OD, thick /4-20 X 3/4 SHCS X 3/4 SHCS /16-18 X 3 1/2 SHCS /4 X 1/2 SHSS, SHOULDER SCREW 10-24TH /16-18 X 5/8 SSS /4-20 X 7/8 SHCS Approved by: SEE ATTACHED DRAWING Date: Printed on , 10:45:41 AM by DAL July 15, 2008 Page 2 of 2

32 REV. DATE DESCRIPTION DRW APPROVED /4-20 X 3/4 SHCS ottom Plate Front Spring Support Table Leg Spring Support Plate ITEM NO. QTY. PART NO. DESCRIPTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE:.XX.01.XXX.005 MATERIAL FINISH HEAT TREAT APPROVALS DATE DRAWN APPR. APPR. SMH 4/10/02 LARSON SYSTEMS INC altimore St. NE PH Mpls., MN FAX Spring Support Table ASSY DWG. NO SCALE: NONE SHEET 1 OF 1

33

34 XX Item 1 Description (ID) / REV. DATE See Filemaker DESCRIPTION 6 1 DRW APPROVED UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE:.XX.01.XXX.005 MATERIAL - APPROVALS FINISH HEAT TREAT - -- DRAWN APPR. APPR. SMH DATE 4/18/02 LARSON SYSTEMS INC altimore St. NE PH Mpls., MN FAX DWG. NO. Indexer Plate Assembly XXW SCALE: NONE SHEET 1 OF 2

35 Rev y Date Description T DAL Added -37, -38, -39, -40 W Parts List Indexer Plate Assembly, 16 station, ".5 ID MIN x 2.00" U RRS V RRS W RRS Add -41 & -42 Add -43 Add -44, -45, -46, -47 Item Qty Part Number Rev Part Name PC Location Part Length W Spring ushing,.500 Min thru Max OD C Indexer Plate, 16 Position X 1/2 FHSCS Indexer Plate, Home Position Cover X 1/4 HCS Hand Knob, Index plate X 3/4 FHSCS 8 Ref Loctite 242 (lue) Medium Strength Prototype Design allowing spring to be pushed into postion, then rotate back for clearence. Approved by: SEE ATTACHED DRAWING Date: Printed on , 6:33:10 PM by DAL November 1, 2013 Page 2 of 2

36 REV DATE DESCRIPTION DRW APP SAFETY GUARD HIDDEN Stroke 37.8 Max Min.375/ Max C L /4-20 UNC APPROVALS DRAWN APP. APP. DAL DATE 10/25/13 SCALE: NONE LARSON SYSTEMS INC altimore St. NE PH Mpls., MN FAX ASSP - Power head with linear scale DWG. NO A REV: SHEET 1 OF 3

37 Rev y DAL ASSP - Power head with linear scale Date Description A Parts List A RRS Add items 1, 2, 10 & 23, Item 20 qty is 7 was 5, renumbered Item Qty Part Number Rev Part Name PC Location Part Length /4-20 X 3/8 HSCS Safety Shield, Test station w/ linear scale, ASSP Encoder Cover X 1/4 HCS /4-20 X 7/8 SHCS Glass Scale Assembly 7 AR C Shim ID, OD, thick 7 AR C Shim ID, OD, thick 7 AR C Shim ID, OD, thick /4-20 X 2 SHCS A rass Wear Pad /16"-20, 11/16" Width, 1/4" Height hex nut /16-18 X 3/4 SSSCPPT ASSP Power head stop weldment A ASSP, Power head stop mount /16-20 Steel Flange Nut /16-20 Jam Nut (black finish) X 1/4 SSS A ASSP, Power head slide FLOW CONTROL1/4" NPTM x 1/4" tube Air Cylinder 2" dia x 6" stroke /4-20 X 1 SHCS ASSP, Power head cylinder mount ASSP, Power head mount Extension block, Test station w/ linear scale, ASSP Adjustable Handle ASSP ADJ. HANDLE STAND OFF /4" FLAT WASHER - ZINC Cable, Scale to SDHT, ASSP Cable Clamp, 3/16" Dia. Approved by: SEE ATTACHED DRAWING Date: Printed on , 9:59:30 AM by RRS Page 2 of 3

38 Rev y DAL ASSP - Power head with linear scale Date Description A Parts List A RRS Add items 1, 2, 10 & 23, Item 20 qty is 7 was 5, renumbered Item Qty Part Number Rev Part Name PC Location Part Length X 3/8 HSCS A PRESET STATION STAND, 18"L, ASSP mount Custom Screws for Platform Alignment C 2" DIA Upper Platform Front Plate (for LSI Encoder) X 1/2 SHCS A Encoder PC Assembly X 1/4 HCS ENCODER SPACER Approved by: SEE ATTACHED DRAWING Date: Printed on , 9:59:30 AM by RRS Page 3 of 3

39 REV DATE DESCRIPTION DRW APP LARSON SYSTEMS INC altimore St. NE Mpls., MN PH FAX APPROVALS DRAWN RRS APP. APP. DATE 10/16/13 Electronics Layout, ASSP DWG. NO A SCALE: NONE REV: SHEET 1 OF 3

40 NUMER TERMINAL LOCKS AS NOTED. SCALE: NONE LARSON SYSTEMS INC altimore St. NE Mpls., MN DWG. NO. PH FAX A SHEET 2 OF 3

41

42 Larson Systems Inc altimore Street NE Minneapolis, MN Fax: