Ditto Wire-to-Wire Genderless Interconnects. Single-Housing and Terminal Interconnect System
|
|
- Valentine Beverly Hunt
- 6 years ago
- Views:
Transcription
1 Ditto Wire-to-Wire Interconnects Single-Housing and Terminal Interconnect System
2 Ditto Wire-to-Wire Interconnects Terminal Housing Molex develops genderless, low-amperage wire-to-wire interconnects that increases cost-savings and operational efficiency while halving tooling and operational costs of dual-gender equivalents. Applications Commercial Vehicle - Golf carts - Riding lawnmowers - Scooters - Two- and three-wheeled vehicles Answering to the consumer appliance, lighting, motorcycle and three-wheeler industry needs for an inexpensive, wire-to-wire interconnect, without the costs of special industry-standardbased solutions, the Ditto, 2.50mm pitch, single-housing and terminal interconnect system is designed to support low-amperage up to 7.0A per blade and 20 to 26 AWG wire size applications. This genderless interconnect solution halves the required application tooling, setup time and cost incurred in dual-gender wire-to-wire equivalents. Ditto connectors, customers enjoy faster tool setup (without the need for machine changeovers); increased operational efficiency and endduced custoe cenventories, s eu and costs. Ditto connectors provide the very platform for standardization in harness applications where components are procurend from ndcfferent sourceus, and make both component sourcing and inventory management easy. Barrel-type terminals also provide universal support for a variety of wire guage and styles. Consumer - Home entertainment systems - Ovens/Ranges - Refrigerators - Washing machines Solid State Lighting - Electronic message boards - Electronic street signage - External building lights Feature Polarizend housing geomes cy Terminals polarizend to the housing silos (terminals cannot be inserted upside down) Low-mating force terminals Friction-locking ndesign Benefit Cable assemblies cannot be mis-mated Ensures correct terminal orientation Minimize operator fatigue when mating cable assemblies Prevents iicndental ndcuengagement of mated cable assemblies IPC/WHMA-A-620* compliant conductor and insulator sections Ensures mechanicallcy end electrically secure connection between the wires and terminals (when using UL 1007 or UL 1061 wire) UL 94V-0 compliant Meets flammabilcscy-safescy us end ndu for home-appliance applications 2 * IPS/WHMA-A-620 is first industry consensus (and certification-based) standard for cable and wire harness fabrication and installation. Published by IPC it is titled Requirements and Acceptance for Cable and Wire Harness Assemblies and covers acceptability criteria for crimped, mechanically secured and soldered interconnection and corresponding lacing/restraining criteria associated with cable and harness assemblies.
3 Specifications REFERENCE INFORMATION UL File No.: E29179 Vol. 10 CSA File No.: Under testing RoHS Compliant ELECTRICAL Current: 2, 3 circuit: 7.2A 4, 6 circuit: 5.6A 8 circuit: 4.8A Voltage: 350V Contact Resistance: 3.5mΩ max Locking Ramp, prevents connectors from accidentally mismating Terminal Extractor access point, allows operator to replace terminals PHYSICAL Operating Temperature: -40 C to 105 C Contact: Copper Alloy Plating: 35 to 75μ" Tin over 30μ" Min Nickel Wire Gauge: AWG, AWG MECHANICAL Mating Force: 4N max. (per circuit) Unmating Force: 3.5N min. (per circuit) Durability: 25 cycles Locking Latch, prevents connectors from accidentally mismating Ditto Wire-to-Wire Interconnects terminal Locking Tang, secures terminal in housing Polarized Mating Geometry, ensures proper mating housing, 8 circuits view 1 Ordering Information Terminal Description Packaging Base Material Plating Wire Range AWG Use Mates Terminal Reel Housing Brass Tin over Nickel Housing, Series Identical Terminal, Series housing, 8 circuits view 2 Description Packaging Resin Flammability Circuit Size Use Mates Housing Bag Nylon UL 94V Terminal Series Identical Housing, Series Application ToolinG Terminal Insulation Diameter Strip Length (20-22 AWG) (24-26 AWG) 1.70 mm max. (0.067" max.) 1.50mm max. (0.059" max.) 2.3 to 2.8 mm to to 2.8 mm to Applicator Hand Tool Extractor
4 Get more insights at: : molex.com/link/ditto.html Designed in Singapore/DC/ Molex
5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Molex:
Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationConnector for Internal Serial Transmission FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-4 June 2013 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationApplication Tooling Specification Sheet
Tool Kit Order No. 63823-5570 FEATURES Application Tooling Specification Sheet TYPE 4C Hand Crimp Tool Order No. 63823-5500 A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed
More informationECONOMY POWER 2.5 CONNECTORS
ECONOMY POWER 2.5 CONNECTORS The Economy Power 2.5 (EP 2.5) connector is a single row or dual row crimp connector system. Based on a 2.5mm (0.098 ) centerline pitch, it is a very compact solution. EP 2.5
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More informationMDual Power Connector
MDual Power Connector Overview Utilizing the efficient high-current design of the PowerBud contact technology, the MDual power connectors carry high power in a small package and features self-aligning
More informationApplication Tooling Specification Sheet
Tool Kit Order No. 63825-6270 FEATURES Application Tooling Specification Sheet TYPE 4C Hand Crimp Tool Order No. 63825-6200 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically designed
More informationMICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
More informationStac64 UnSealed connector SyStem
Stac64 A stackable connection system for unsealed applications, providing single and multi-pocket PCB solutions, offering a diverse range of circuit sizes Stac64 34729 Female Signal Receptacle 34803 CTX64
More informationLoad Resistive load (p.f. = 1) Inductive load (p.f. = 0.40, L/R = 7 ms) Rated load 5 A at 250 VAC, 30 VDC 2 A at 250 VAC, 30 VDC
Power PCB Relay G6D-ASI Reduced board space ideal for high-density mounting (45% smaller than the surface area of G6B). Slim package: measures 6.5 W x 17.5 L x 12.5 H mm Switches loads up to 5 A, 250 VAC/30
More informationPositive Lock Receptacles
Positive Lock eceptacles Product Facts educed insertion force Locks onto tabs containing holes Housing insulates and serves as a removal tool Snap action tells assembler receptacle is mated properly Terminated
More informationWedge in Plugs Stock No
Amphenol Connectors Description Plugs Stock No. Receptacles Stock No. 2-way 38170 38171 3-way 38172 38173 4-way 38174 38175 6-way 38176 38177 8-way 38178 38179 12-way 38180 38181 Wedge in Plugs Stock No.
More information1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSP. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSP Terminal Blocks Functional characteristics Dimensional class: high RoHS 2011/65/EU Standard colour: green Height: 0 21.5
More informationPart Number Example (example) CDR31 BP 101 B K S M. MIL Style Voltage-temperature Limits
Part Number Example CDR31 thru CDR35 MILITARY DESIGNATION PER MIL-PRF-55681 W D L t Part Number Example (example) CDR31 BP 101 B K S M MIL Style Voltage-temperature Limits T Capacitance Rated Voltage Termination
More informationBH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
More informationAmphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
More informationQuick Reference Guide Euro Style Terminal Blocks
Quick Reference Guide Euro Style terminal block connectors feature various wire termination methods including rising cage clamp, wire protector, spring, IDC and crimp snap. The design of terminal block
More informationRoHS 2011/65/EU GREEN ELECTRONICS MSG. Terminal Blocks ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2011/65/EU e3 GREEN ELECTRONICS Terminal Blocks ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS TERMINAL BLOCKS Functional characteristics s 270
More informationAC Z SERIES XLR METAL CHASSIS MOUNT CONNECTORS
AC Z SERIES XLR METAL CHASSIS MOUNT CONNECTORS The metal chassis mount Z series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSM. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSM Terminal Blocks Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Height: 15.2
More informationMini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
More informationPRODUCT SPECIFICATION
of 3 C Section : For the 200222, 2002323, 2002444, 20025, 200252, 200252, 20026, 200262, 200262, 20028, 200283, 200284, 2002822, 2002824, 200283, 2002832, 2002833, 2002834 and 2002835 series parts..0 GENERAL
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63827-0870 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63827-0800 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomically
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More information2mm Pitch Miniature Connector for HDD
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationAPPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
More informationLow Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
More informationDimensions: [mm] Recommended Hole Pattern: [mm] Pattern Properties: Article Properties:
Dimensions: [mm] Recommended Hole Pattern: [mm] 1 End 2,5 5 2,6 L ±0,1 0,7 x 1 pl ±0,1 5 11,5 ±0,1 3,6 3 2,6 1 End O 1,3 Pl ±0,1 3,5 4 7,5 ±0,1 Pattern Properties: Properties Value Unit Pin to Pin (Middle)
More informationAdam Technologies, Inc.
iec 320 & mini iec CoNNeCTorS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE and other applicable
More informationSCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CTF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.1 x 15.5 mm
More informationComponent Specification
1.0 DESCRIPTION OF CONNECTOR AND INTENDED APPLICATION. The M80 series stamped female Trio-Tek open barrel crimp contact and rectangular Trio-Tek crimp housing form part of the Datamate J-Tek range of 2mm
More informationConnector for Internal Serial Transmission. FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
More informationAmphenol Amphenol PCD Shenzhen Excel Mate High Voltage Safety Lock
Amphenol Amphenol PCD Shenzhen Excel Mate High Voltage Safety Lock www.amphenolpcd.com.cn CONTENT Excel Mate Product introduction........ 2 Excel Mate plus.... 3 1 PIN RECPTACLE........ 4 1 PIN PLUG.........
More informationApplication Tooling Specification Sheet
Tool Kit Order No. 63811-7570 FEATURES Application Tooling Specification Sheet TYPE 2C Hand Crimp Tool Order No. 63811-7500 A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed
More informationAmphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
More informationWire. Socket (with polarizing guide) Wire can be connected without stripping cable insulation. IDC contacts. Rise in temperature ( C)
IDC Connectors for Discrete Wires Trouble-free discrete-wire termination with IDC Sockets that accommodate MIL Plugs. XG5 * Two-slot, IDC construction and insulation barrel offer high reliability and large-current
More informationApplication Tooling Specification Sheet
FineAdjust Applicator FEATURES Application Tooling Specification Sheet Order No. 63902-0700 Quick punch removal with the push of a button for fast and easy tooling change Applicator designed to industry
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CIF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 18.4 x 15.5
More informationJUL 14 Rev B
Power Triple Lock (PTL) Connector System Application Specification 4-068 2 JUL 4 Rev B NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
More informationPOWER TRIPLE LOCK* Connector System
POWER TRIPLE LOCK* Connector System Application Specification 114-106118 23 MAY 18 Rev J NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
More informationProduct Specification Rev A
Product Specification 108-6116 1. Scope :.5 Signal DBL Lock Connector 18P 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
More informationRP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More information7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
7.9mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Positive Lock Completely enclosed locking system Protection from shorts circuits between adjacent
More informationRP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationApplication Tooling Specification Sheet
Tool Kit Order No. 63811-7570 FEATURES Application Tooling Specification Sheet TYPE 2C Hand Crimp Tool Order No. 63811-7500 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically designed
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationMTB TERMINAL BLOCKS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green
Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Height: 8.5 mm (.335 in) 0 10 ½ 20 Max approved wire sections: solid: 1.5 mm2 (IMQ); 16 AWG (UL) stranded: 1 mm²
More informationPRODUCT SPECIFICATION
ML-XT COMMERCIAL VEHICLE CONNECTOR SERIES 1.0 SCOPE This Product Specification relates to the ML-XT Commercial Vehicle, (CV), Power and/or Signal wire-to-wire connector system. This system consists of
More informationCSF - CSM CONNECTORS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green
- CSM Functional characteristics Dimensional class: low 0 RoHS 2011/65/EU Standard colour: green Dimensions: 14 x 11.5 mm (.551 x.453 in) 10 20 30 mm ½ 1 in Max approved wire size: solid: 2.5 mm 2 (IMQ);
More informationM40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
More informationApplication Tooling Specification Sheet
Tool Kit Order No. 63811-7470 FEATURES Application Tooling Specification Sheet TYPE 2C Hand Crimp Tool Order No. 63811-7400 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically designed
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationFRNR A 250V TD Class RK5 Dual Elem Fuse-Fusetron
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FRNR225 225A 250V TD Class RK5 Dual Elem Fuse-Fusetron Number Manufacturer Description Weight per unit Product Category
More informationCONNECTORS & RECEPTACLES
60 HEX NUT Used in mounting rear or front of panel receptacles LOCK WASHER Prevents rear or front of panel receptacle from working loose when installed TYPICAL SL172F REAR MOUNT RECEPTACLE THREADED BUSHING
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More informationApplication Tooling Specification Sheet
Tool Kit Order No. 63811-5270 FEATURES Application Tooling Specification Sheet TYPE 2C Hand Crimp Tool Order No. 63811-5200 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically designed
More informationNational Marine Manufacturers Association Product Compliance Specialist Examination D.C. Electrical (2013 MY) ABYC E-11 (08 Amended 09)
1. Two marine electrical technicians are discussing conductor support. Tech A says that all conductors shall be supported throughout their length or at least every 18. Tech B says that there is an exception
More informationS 3 INTERCONNECT PRODUCTS. Power Supply Safe Solutions FCI COPYRIGHT FCI MVL Division
P. OWER S 3 Power Supply Safe Solutions INTERCONNECT PRODUCTS 2012 FCI MVL Division A changing automotive market environment Source : Bain & Co 2 Battery electrical solutions for metropolitan mobility
More informationSingle 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationDuraSeal Heat-Shrinkable Environmentally Sealed, Nylon Insulated Crimp Terminals and Disconnects
Sealed, Nylon Insulated Crimp Terminals and Disconnects Product Facts Resistance to moisture and abrasion Strain relief Protection from wire pull-out Easy installation UL and CUL listed R Approvals and
More informationGecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
More informationSP SERIES LOUDSPEAKER CONNECTORS
SP SERIES LOUDSPEAKER CONNECTORS Amphenol s range of loudspeaker connectors have been further enhanced with the introduction of the SP Series. Designed to complement the popular EP/AP Series, we now offer
More information3.3 mm Contact Pitch, Connectors for Internal Power Supplies
. mm Contact Pitch, Connectors for Internal Power Supplies DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits between adjacent Contacts Features 1. 5
More informationabout us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
More informationCreative Links to World Electronics
Interconnect Solutions for Lighting Creative Links to World Electronics Hirose Wire-to-Board Connectors Hirose s interconnect products offer innovation, versatility and low profiles for your LED engineered
More informationCastellated/Hex Nut. Insert Retaining Ring. Contact Insert
Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Contact Insert Sealing Cap Clip Gland Cage Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding
More informationApplication Tooling Specification Sheet
FineAdjust Applicator FEATURES Application Tooling Specification Sheet Order No. 63900-3700 Directly adapts to most automatic wire processing machines Quick punch removal with the push of a button for
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More informationApplication Tooling Specification Sheet
T2 terminator FEATURES Application Tooling Specification Sheet Order No. 63910-3700 It is ideally suited for mid-volume bench operations This terminator can be installed in the TM42 and the TM40 press
More informationCONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
More informationInstallation Instructions for GRIPPER CONNECTOR
Installation Instructions for GRIPPER CONNECTOR LLI-GC-LL-RGB LLI-GC-LL-RGBW (12mm only) LLI-GC-LL-SC LLI-GC-LL-VW LLI-GC-LW-RGB LLI-GC-LW-RGBW (12mm only) LLI-GC-LW-SC LLI-GC-LW-VW Prior to installation,
More informationRoHS 2002/95/EC GREEN ELECTRONICS PSQ. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS PLURIMA
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationApplication Tooling Specification
Order No. 200218-0400 Application Tooling Specification Type 4A FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles
More informationAgency Approvals UL and CSA China RoHS - Below MCV Yes Color Red EU RoHS Compliant Yes Maximum Recommended Voltage Rating 600 Volt Units per Box 100
3M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3M Electronic Specialty Markets - New Product
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CCF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 25.4 x 14.9
More informationDirectory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
More informationPrinter-friendly format 3M Scotchlok Electrical Spring Connectors Y- BOX 5-8#22, 4-6#20, 2-5#18, 2-3#16 AWG, 100 per box, Yellow. Learn More...
3M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets 3M Electronic Specialty Markets - New Product
More informationRoHS 2002/95/EC GREEN ELECTRONICS CSF. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS CSF Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET STD PRODUCTS CONNECTORS
More informationDTP Series : Contacts (Open Barrel) Type Barrel Type GA Size
Deutsch Connectors DTP Series Deutsch s DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed
More informationFeaturing Radsok Technology. eco mate rm. Rugged Metal Shielded Connectors RELIABLE SIGNAL AND POWER SOLUTIONS
Featuring Radsok Technology eco mate rm Rugged Metal Shielded Connectors RELIABLE SIGNAL AND POWER SOLUTIONS www.amphenol-sine.com +1 800 394 7732 2 2015 Amphenol Sine Systems Corporation. Every effort
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationabout us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.
table of contents 2 about us 3 custom products circular connectors & cable assemblies 6 en2 0.53 [13mm] od - 2-7 contacts 10 micro-con-x 0.53 [13mm] od - 2-7 contacts 16 en3 0.71 [18mm] od - 2-18 contacts
More informationQuick Reference Guide AMP CT Connector Series
Quick Reference Guide The AMP CT connectors are a miniature wire-to-board and wire-to-wire interconnect solution. The AMP CT connector series has proven performance in its harness making capability. A
More informationPRODUCT SPECIFICATION
1 of 14 Table of Contents 1.0 Scope... 3 2.0 Product Description... 3 2.1. Direct Connect (wire to board application)... 3 2.2. Inline Applications (wire to wire application)... 3 2.3. Receptacle Assembly...
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More informationGT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
More informationCIF CONNECTORS. Functional Characteristics. Brief Description. RoHS 2002/95/EC. Dimensional Class: Medium. Standard Colour: Green
SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET STD PRODUCTS CONNECTORS Functional Characteristics Dimensional Class: Medium Standard Colour: Green Dimensions: 18.4 x 15.5 mm (.724 x.610 in) Max Approved Wire
More information6000 Series Ethernet Buccaneer
Thermo-plastic version Patch Cord Flex Connector - Pur Jacket Cable PXP6037 Mates with PXP6033TP type panel mounting Overmoulded patchcords with IP rated connector Supplied with shielded RJ45 plug Single
More informationDeutsch Connectors. Catalogue Number #2014TDC.
Catalogue Number #2014TDC Features & Benefits Deutsch connectors are ideal where dust, dirt, moisture, salt spray, and vibration can contaminate or damage electrical connections. Deutsch Features Common
More informationConectores Rectangulares
Conectores Rectangulares Serie G SUMINISTROS INDustriales MP4 S.L. TEL. +34 93 590 94 77 c/adrià Gual, 10 local 2 08173 Sant Cugat del Vallès Barcelona (Spain) www.suministros-industriales.es e-mail: mp4@suministros-industriales.es
More information