TAB B. Hydrotest Summary Report. Piping Specifications and Procedures. Pipe Manufacturers. Order XG-N Application for Leave to Open
|
|
- Sybil Ray
- 5 years ago
- Views:
Transcription
1 NOVA Gas Transmission Ltd. Alces River B2 Compressor Station Order XG-N Application for Leave to Open TAB B Hydrotest Summary Report Piping Specifications and Procedures Pipe Manufacturers
2 LEAVE TO OPEN HYDROTEST SUMMARY REPORT C Test Number: Description: Pipe Data: Alces River B2 Compressor Station Modifications Project Number M TCPL-ALCES-TP-01 High Pressure Gas Piping Line 36-D1-HG-075-A1 Line 36-D1-HG-071-A1 NPS 36 x 19.7mm WT, GR 483, CAT II, -45C, TES-PIPE-SAW Set Pressures: Design (C/S): 9560 kpa(g) Test: kpa(g) Test Medium: Test Location: Water Carber Testing Facility Edmonton Achieved Pressure: Min: kpa(g) Max:14820 kpa(g) Date and Time: Ambient Temperature: Testing Supervisor: Test Number: Description: Pipe Data: August 22, :05 to 18:05 hours 16 to 22 degrees C Justin Breau TCPL-ALCES-TP-02 High Pressure Gas Piping Line 42-D1-HG-070-A1 Line 42-D1-HG-071-A1 Line 42-D1-HG-075-A1 Line 42-D1-HG-077-A1 Line 2-D1-HG-076-N Line 2-D1-HG-078-N Line 2-D1-HG-079-N Line 2-D1-HG-123-N Line 2-D1-HG-124-N Line 2-D1-HG-127-N Line 1½-D1-HG-128-N Line ½-D1T-HG-128-N Line 1½-D1-HG-129-N Line ½-D1T-HG-129-N Line 1½-D1-HG-130-N Line ½-D1T-HG-130-N Line 1½-D1-HG-131-N Line ½-D1T-HG-131-N NPS 42 x 23.0mm WT, GR 483, CAT II, -45C, TES-PIPE-SAW NPS 2 x 8.7mm WT (XXS/S.80), ASTM A333 Gr.6 Seamless NPS 1 1/2 x 5.5mm WT (XXS/S.80), ASTM A106 Gr.B Seamless NPS ½ x 0.89mm WT ASTM A269 Gr. TP304/TP316 seamless, bright, annealed Set Pressures: Design: 9560 kpa(g) Test: kpa(g) B1
3 C LEAVE TO OPEN HYDROTEST SUMMARY REPORT Test Medium: Water Test Location: Alces River Compressor Facility (NW W6) Achieved Pressure: Min: kpa(g) Max: kpa(g) Date and Time: November 1, :00 to 15:00 hours Ambient Temperature: 0.6 to 1.1 degrees C Testing Supervisor: Justin Breau B2
4 ALCES RIVER B2 COMPRESSOR STATION MODIFICATIONS (PROJECT NO. M ) TRANSCANADA SPECIFICATIONS AND PROCEDURES Specification Title Rev. No. Material Specifications TES-FITG-CIF Specification for Contoured Insert Fittings 2 TES-FITG-EC1 Specification for End Closures 2 TES-FITG-LD Specification for Carbon Steel Buttwelding Fittings, Grade 290 and Higher 4 TES-FITG-T01 Instrument Tube Fitting, Instrument Pipe Fitting and Tubing Material 6 Specification TES-FLGE-LD Specification for Carbon Steel Buttwelding Flanges 5 TES-MATL-MD1 Piping System Materials for Pipeline, Compression and Metering Facilities 0 TES-PIPE-EW Specification for Electric Welded Pipe 3 TES-PIPE-SAW Specification for Double Submerged Arc Welded Pipe 2 TES-VALV-LD Specification for Steel Valves 4 TES-VALV-U14 Valves NPS 12 and Smaller 2 TES-VOPR-GH Gas Hydraulic Valve Operator Specification 0 Mechanical Specifications TES-DV Mechanical General Requirements 0 TES-DV Acoustic Insulation of Gas Piping 1 TES-DV Piping 1 TES-DV Welding and Pipe Weld Inspection 2 TES-DV Testing of Station Piping 1 TES-DV Tubing and Fittings 0 TES-MECH-FBT Specification for Flange Assembly 2 TEP-MECH-TRAN Transition Design and Joining Methods 3 Welding Specifications / Procedures TES-WELD-AS Welding of Assemblies and Station Piping 4 TES-WELD-PL Welding of Pipelines and Tie-Ins 4 TES-WELD-STRU Welding Procedure Specification for Shielded Metal Arc Welding 3 TEP-WELD-CLOS Closure Weld Procedure 2 TEP-WELD-ABR Removal of Arc Burns (New and Existing Facilities) 2 Testing Specifications / Procedures TEP-NDT-ADT Procedure for Non-Destructive Examination (NDE) Audits 1 TEP-NDT-VT Procedure for Visual Examination 0 TES-HYDRO-CDN Hydrostatic Testing Specification 2 TES-NDT-MT Magnetic Particle Inspection Specification 1 TES-NDT-PT Liquid Penetrant Inspection Specification 0 TES-NDT-RT Radiographic Examination of Welds 5 TES-NDT-UT2 Manual Ultrasonic Examination of Welds 2 Coating and Painting Specifications TEP-COAT-BRUSH External Liquid Brush Grade Coating Systems for Below Ground Facilities 0 TEP-COAT-OVR Overcoating FBE and External Liquid Coated pipe for Above Ground Use 1 TES-COAT-EP External Polyethylene Coating for Steel Pipe 3 TES-COAT-EPU External Liquid Coating Systems for Below Ground Facilities 11 TES-COAT-P1 Paint Systems for Above Ground Facilities (Non-Coastal) 8 TES-COAT-PET Coating Application Procedure for Petrolatum Tape Coating 2 TEP-COAT-TRANS Tie-in Procedure for Asphalt, Thin Film Tape, and Coating the Edge Transition of Clamps, Braces, and Supports 01 B10
5 ALCES RIVER B2 COMPRESSOR STATION MODIFICATIONS (PROJECT NO. M ) TRANSCANADA PIPING SPECIFICATIONS Reference TransCanada Specification: TES-MATL-MD1 Table 5: High Pressure Gas - Compression Facility B11
6 B12
7 ALCES RIVER B2 COMPRESSOR STATION MODIFICATIONS (PROJECT NO M ) SUMMARY OF PIPE MANUFACTURERS Pipe Description Pipe Heat No. Pipe Manufacturer NPS 1 1/2 x 5.5mm WT (XXS/S.80), ASTM A BENTELER Gr.B Seamless NPS 2 x 8.7mm WT (XXS/S.80), ASTM A333 Gr.6 Seamless NPS 36 x 19.7mm WT, GR 483, CAT II, -45C, TES-PIPE-SAW ; NPS 42 x 23.0mm WT, GR 483, CAT II, -45C, TES-PIPE-SAW 9165; TENARIS 1C12416; 1C12417; 1C12420; 1C12421; 1C12422 JFE STEEL WEST JAPAN (FUKUYAMA); SUMITOMO METAL CORP, JAPAN; B04
Station 130 (Maple) Compressor Upgrade Project
Station 130 (Maple) Compressor Upgrade Project Application August 2012 Supplied to: The Secretary National Energy Board 444 7th Avenue SW Calgary, Alberta T2P 0X8 TransCanada Pipelines Limited APPENDIX
More informationBroetje-Automation Company Standard Structural component specification for welded parts
Broetje-Automation Company Standard Table of Contents Application Area and Purpose 3 1 Structural components pursuant to DIN 1090 4 1.1 Structural component classification 4 1.1.1 Steel components < Strength
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest
More informationDRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen
More informationDate of Addendum Issue: Effective Addendum Date: Affected Publication: ADDENDUM 2
Date of Addendum Issue: August 2011 Effective Addendum Date: February 1, 2012 Affected Publication: API Specification 6D, Specification for Pipeline Valves, 23rd Edition, April 2009, Effective Date: October
More informationFirst Quality Solutions
First Quality Solutions Turbine Inspection Reports www.firstqualitysolutions.org VISUAL EXAMINATION REPORT Customer: Sample Turbine Outage PO: 104568912 Report No: S1 Component: Turbine Components WO:
More informationPrevention vs. Reaction The Importance of Asset Integrity
Prevention vs. Reaction The Importance of Asset Integrity How Your Assets Typically Age Inspections Potential Failure Condition Functional Failure Time P-F Interval Why is Asset Integrity so Important?
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : Keresteciler Sitesi E Blok No:5 Kat:2 Ostim / Yenimahalle 06170 ANKARA/TÜRKİYE Phone : +90 312 385 95 30 Fax : +90 312 386 00
More informationSUFA WEDGE GATE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC
SUFA WEDGE GATE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC INTRODUCTION Gate valves as shut off valves are used in the industrial area most commonly today. They are
More informationThe globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on
More informationAnnex of the Certificate (Page 1/5) Scope of Accreditation
Annex of the Certificate (Page 1/5) As a "Type A" Inspection Body Address : Esas Maltepe Ofispark Altayçeşme Mah. Çamlı Sokak No:21 Kat:8 Maltepe 34843 İSTANBUL/TÜRKİYE Phone : +90 216 518 40 50 Fax :
More informationDatasheet. control line. e109 - September Manufacturing Range. Experience. Applications. Production Facilities
Datasheet Experience The Oil & Gas sector represents one of Fine Tubes principal markets for supply of a wide range of tubular product forms and materials. Our products have been successfully used in some
More informationDelivery program. Carbon steel and stainless steel tubes in a wide range of qualities and dimensions. Distribution
Delivery program Carbon steel and stainless steel tubes in a wide range of qualities and dimensions Distribution Our value proposition The reliable supply of high-quality steel tubes and customized service
More informationSpecial Projects. Pump Modules. Fluid complete solutions from the KRAL brand. s i n c e PUMPS.
Pump Modules. Fluid complete solutions from the KRAL brand. PREMIUM MANUFACTURER s i n c e 1 9 5 0 PUMPS www.kral.at Expertise and Experience. KRAL AG is a leading company in the field of pump and flow
More informationAN ISO 9001 : 2008 COMPANY SWING CHECK VALVE. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 COMPNY SWING CHECK VLVE Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TECH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 14 16 18 20
More informationtechnical description:
The steel flanged and welded swing check valves are the pipeline valves, preventing automatically a working medium from the back flow. They are used for: - noncorrosive fluids - water - steam - oil - petroleum
More informationGALLI&CASSINA. Plug Valves. Conical
Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure
More informationSaddle Butte Rockies Midstream LLC Contractor Covered Task List Last updated 12/6/2017
003 Test Breakout Tank Overfill Protective N/A 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective N/A 195.428 Oral 005 Repair Breakout Tank Overfill Protective N/A 195.428 007 Operate
More informationPipeline Engineering & Supply Co Ltd. Standard Pig Launcher / Receivers.
Pipeline Engineering & Supply Co Ltd. Standard Pig Launcher / Receivers. The information below derives the basis for basic form standard Pig Launcher/Receiver design, manufacture and testing within Pipeline
More informationtechnical description:
The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME
More informationEnbridge Gas Transmission and Midstream and Enbridge Liquid Pipelines (Express-Platte) Contractor Covered Task List Last updated 8/30/2018
001 Provide Security for Pipeline Facilities 195.436 Oral 003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 Oral
More informationCATALOG Monolithic dielectric joints
CATALOG Monolithic dielectric joints Monolithic dielectric joints are compact prefabricated structures which guarantee the interruption of electrical continuity in pipeline network. These joints can be
More informationSpecifications. Product Lines
Product Lines Oil Country Tubular Goods Line Pipe tandard Pipe Piling prinkler Pipe pecifications API 5L: A, B X42, X46, X52, X56, X60, X65, X70, X80 ATM: A53A, B A252 Gr 1, 2, 3 A500, A135, A795 API 5CT:
More informationGUJARAT NARMADA VALLEY FERTILIZERS & CHEMICALS LIMITED 50,000 MTPA PAC PROJECT ANNEXURE 6.4 SECTION 4-07 PROCUREMENT SPECS FOR FORGED VALVES
GUJARAT NARMADA VALLEY FERTILIZERS & HEMIALS LIMITED 50,000 MTPA PA PROJET ANNEXURE 6.4 SETION 4-07 PROUREMENT SPES FOR FORGED VALVES ONTENT 1.0 GENERAL 2.0 DESIGN 3.0 TESTS 4.0 INSPETION 5.0 SHIPMENT
More informationTOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
More informationSouthern Star Central Gas Pipeline Contractor Covered Task List Last updated 8/15/2018
007 Operate Valves 008 Measurement of Wall Thickness with Ultrasonic Device 018 Inspect Navigable Waterway Crossing 195.412(b) 201 Abnormal Operating Conditions Related to Welding on Pipelines 192.225
More informationUrea Reactor Height Extension to Increase Capacity
Technical Paper June 2014 Urea Reactor Height Extension to Increase Capacity Hermann Kernberger Schoeller-Bleckmann Nitec GmbH (SBN), Austria Bob Edmondson Yara Belle Plaine, Canada Summary A discussion
More informationPETRO VALVES. Gate Globe Check VALVE CATALOGUE. Subsidiary of Petro Power UK
PETRO VALVES Gate Globe Check VALVE CATALOGUE Subsidiary of Petro Power UK 2 PETRO VALVES The company 4 GATE VALVES BOLTED BONNET from Class 150 up to Class 2500 from 2 up to 36 PRESSURE SEAL from Class
More informationPTFE Lined Pipe and Fittings
Allied Supreme Corp. - 1 - PTFE Lined Pipe and Fittings Allied Supreme Corp. - 2 - Index Specification For PTFE Lined Pipe and Fittings..3 PTFE Lined Pipe 7 PTFE Lined 90 Elbow. 8 PTFE Lined 45 Elbow.9
More informationProduct Catalogue2015 NORDIC QUALITY, PRECISION, DEPENDABILITY AND KNOW-HOW
Product Catalogue2015 NORDIC QUALITY, PRECISION, DEPENDABILITY AND KNOW-HOW 2 Your specialist in welded stainless steel tubular products 3 Welded Stainless Steel Tubular products for every need 4 Content
More informationLAR Training. Series 8000 Pneumatic Safety Shut Off Valves Mark Lampe May,
LAR Training Series 8000 Pneumatic Safety Shut Off Valves Mark Lampe May, 18 2015 Series 8000 Pneumatic Valve Unique vertical space saving design Maintenance free gas and fluid seal that eliminates packing
More informationNoble Energy Contractor Covered Task List Last updated 2/20/2019
003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 005 Repair Breakout Tank Overfill Protective Devices 195.428
More informationHigh performance valves for high level expectations PROUDLY MADE IN ITALY
High performance valves for high level expectations Location ERREESSE, established in 2004, is a manufacturing company based in the Northern Italy, Grignasco, a nice town in the green Valsesia (Sesia Valley),
More informationINSPECTION TECHNIQUE FOR BWR CORE SPRAY THERMAL SLEEVE WELD
More Info at Open Access Database www.ndt.net/?id=18479 INSPECTION TECHNIQUE FOR BWR CORE SPRAY THERMAL SLEEVE WELD ABSTRACT J.L. Fisher, G. Light, Jim Crane, Albert Parvin, Southwest Research Institute,
More informationMSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
More informationForged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
More informationHoward Midstream Energy Partners LLC Contractor Covered Task List Last updated 10/11/2013
001 Provide Security for Pipeline Facilities 195.436 Oral 003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 005
More informationMTU Maintenance Dallas, Inc. Integrated Management System. MM 03D-03 Capability List Manual
Chapter 0 Page 2 of 15 Revision: Initial Date: 01NOV2012 0.1 Table of Contents 0 Title Page... 1 0.1 Table of Contents... 2 0.2 List of Effective Pages... 3 0.3 Record of Revision... 4 0.4 Record of Temporary
More informationPRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
More informationIntroduction Certifications References Standards Ball Valves Trunnion Mounted Ball Vaves Product Range...
CATALOGUE CONTENTS Introduction... 3 Certifications...4-5 References Standards... 6 Ball Valves... 7 Trunnion Mounted Ball Vaves... 8 Product Range... 9 Available Design Options... 10 Quality & Testing...
More informationLarge bore valves. Powergeneration / petrochemical industries. Medium & high-pressure valves in accordance with ASME, EN, BS and API
Large bore valves Powergeneration / petrochemical industries Medium & high-pressure valves in accordance with ASME, EN, BS and API An introduction to Key Valve Technologies Ltd. Key Valve Technologies
More informationPRESSURE REDUCING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationSplit Tees BRUVAL. Description. Sizes: 12 up to 68 inches. We provide fittings up to 68 inches.
BRUVAL Split Tees Sizes: 12 up to 68 inches TECHNICAL SPECIFICATION 2016.07.0001 We provide fittings up to 68 inches. Description BRUVAL provides a wide variety of standard and customised Fittings from
More informationBENTELER Distribution. Pipe solutions to the petrochemical and power generation sectors
BENTELER Distribution Pipe solutions to the petrochemical and power generation sectors About us BENTELER Distribution is an internationally operating stockholding and processing company of steel tubes
More informationfor Instrumentation and Hydraulic Systems
Seamless Stainless steel Tubes for Instrumentation and Hydraulic Systems Standards: ASME SA-213/SA-213M; ASTM A269/269M; ASME SA-312/SA312M; ASME SA-789/SA-789M; ASME SB-163; ASME SB-444; EN 10216-5; EN
More informationMODULATING FLOAT CONTROL VALVE
PROJECT NAME LOCATION MODULATING FLOAT CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationNDT & Welding Inspection Training and Certification Center
020118 NDT & Welding Inspection Training and Certification Center BROCHURES, SCHEDULE & PRICE LIST 2018 Jalan Raja Haji Fisabilillah Komplek Trikarsa Ekualita Blok C No 12 Sei. Panas, Batam Indonesia Telepon
More informationReport of Inspection
P. O. Box 8238 Searcy, AR 72145 866.811.5237 / 501.279.1166 Fax: 501.279.1225 As required by NFPA 1911 19.3: CFS Inspections is accredited to the requirements of ISO/IEC 17020. Report of Inspection SAFET
More informationFLOAT CONTROL VALVES
PROJECT NAME LOCATION FLOAT CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 8 in. (200 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationDCP Midstream Contractor Covered Task List Last updated 7/11/2018
001 Provide Security for Pipeline Facilities 195.436 Oral 007 Operate Valves 008 Measurement of Wall Thickness with Ultrasonic Device 009 Movement and/or Relocation of Liquid Pipelines 195.424 011 Inspect,
More informationResearch Title DYNAMIC MODELING OF A WIND-DIESEL-HYDROGEN HYBRID POWER SYSTEM
Research Title DYNAMIC MODELING OF A WIND-DIESEL-HYDROGEN HYBRID POWER SYSTEM Presenter: Md. Maruf-ul-Karim Supervisor: Dr. Tariq Iqbal Faculty of Engineering and Applied Science Memorial University of
More informationALUMINUM DISTRIBUTING, INC S.W. 2nd Ave. Ft. Lauderdale, FL Table of Contents
Table of Contents Page 2.........Equal & Unequal Angle Structural & Architectural Page 3.......................Flat Bar Structural Page 4.....................Flat Bar Architectural Page 5..... U Channel,
More informationPRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
More informationColumbia Pipeline Group Contractor Covered Task List Last updated 1/8/2018
001 Provide Security for Pipeline Facilities 195.436 Oral 003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 Oral
More informationVision. Contacts. A cleaner world, one project at a time
API 5L ERW PIPE In 1984, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American brands and companies.
More informationTransCanada US Contractor Covered Task List Last updated 9/27/2018
003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 Oral 005 Repair Breakout Tank Overfill Protective Devices 195.428
More informationDetection and evaluation of rail defects with nondestructive
19 th World Conference on Non-Destructive Testing 2016 Detection and evaluation of rail defects with nondestructive testing methods Anika DEY 1, Jochen KURZ 2, Lukasz TENCZYNSKI 3 1 DB Systemtechnik GmbH
More informationSOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationSECTION FACILITY FUEL - NATURAL GAS PIPING AND SYSTEMS
SECTION 23 11 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Fuel Pipe and Pipe Fittings - General 2. Steel Pipe and Fittings, Above Grade 3. Steel Pipe and Fittings, Below Grade 4. Polyethylene
More informationMineral-Insulated RTD Temperature Probe According to DIN EN 60751
ata Sheet 902210 Page 1/12 Mineral-Insulated RT Temperature Probe According to IN EN 60751 For temperatures from -50 (-200) to +600 C Flexible sheath cable with vibration-resistant measuring insert As
More informationWelding All assembly welds are full penetration. All welds are crevice and undercut free. Weld finish & detail drawings available upon request.
Single element sanitary liquid housing Designed specifically for the food & beverage and pharmaceutical industries Sanitary triclamp body closure as standard STANDARD product Sanitary surface finish Triclamp
More informationMAC-WELD Level Chamber for External Process Level Measurement
Product Data Sheet Issued: June 2015 MAC-WELD LVL series Level Chamber MAC-WELD Level Chamber for External Process Level Measurement MAC-WELD Manufactures high quality chambers allowing external mounting
More informationInformation for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN
Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN 15085-2 Certificate According DIN EN 15085-2 Railway applications - Welding of railway vehicles and components
More informationSteam Trapping and Steam Tracing Equipment
Steam Trapping and Steam Tracing Equipment Steam Traps Pay less money for energy and more attention to the environment. It s pretty obvious, really. An efficient steam trap wastes less energy, which means
More informationALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
More informationStandards Pertaining to Valves Used in the Oil & Gas Industry
PDHonline Course M159 (2 PDH) Standards Pertaining to Valves Used in the Oil & Gas Industry Instructor: Peter Smith, HNC (Mech) 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
More informationSafety is our first priority TM
Safety is our first priority T Catalog No. -2013.YP1 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED
More informationYellow Point. Catalog No YP.1
Yellow Point Catalog No. -2014.YP.1 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
More informationA. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less.
SECTION 221513 - COMPRESSED-AIR PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less. 1.2
More informationYellow Point. Catalog No YP.2
Yellow Point Catalog No. 8-15.YP.2 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
More informationBoardwalk Pipeline Partners, LP Contractor Covered Task List Last updated 9/17/2018
003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 Oral 005 Repair Breakout Tank Overfill Protective Devices 195.428
More informationNorthern Natural Gas Contractor Covered Task List Last updated 4/26/2018
001 Provide Security for Pipeline Facilities 195.436 Oral 003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 Oral
More informationThis annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
s where activities are performed under accreditation Abbreviation/ location code Delftweg 144 3046 NC terdam Applus RTD Netherlands neveld Anthonie Fokkerstraat 10 3772 MR neveld Applus RTD Netherlands
More informationEnLink Midstream Contractor Covered Task List Last updated 11/8/2017
003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 005 Repair Breakout Tank Overfill Protective Devices 195.428
More informationProcedure for Long-Term Storage of CYCLO DRIVE, BEIER VARIATOR, and BEIER-CYCLO VARIATOR
1/7 1. Notes on Using This Manual ---------------------------------------------------------------------------Page 1 of 7 2. Rust Prevention for Assembled Unit------------------------------------------------------------------Page
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More informationVALIADIS S.A. Hellenic Motors Quality Assurance Certificate EN ISO 9001:2008 C e r t i f i c a t e R e g. N o
XRZ Series Thin Oil Lubricator 1.Usage : The product mainly applies to mechanical thin oil circle lubrication system of cement metallurgy, rolling, mine energy sources, light industry, transportation petrochemistry
More informationVision. Contacts. A cleaner world, one project at a time
API 5L CW PIPE In 1984, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American brands and companies.
More informationWarmly Welcome to Visit BSW-CNPC!
Warmly Welcome to Visit BSW-CNPC! 1. Brief introduction Shanghai BSW Petro-Pipe Co., Ltd. (BSW) is a Joint Venture Company which is organized by Baoji Petroleum Steel Pipe Co., Ltd. (BSG), and UMW of
More informationCOMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
More informationRHINO VALVES WORLDWIDE
RHINO VALVES WORLDWIDE Series 44 ISO Design of three pieces with plate disposition ISO 5211 for their automation. The drilled superior portion of the body (ISO5211) allows an easy installation of automation
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationEXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
More informationCOLLAPSED VIEW EXPLODED VIEW SHEET 1 OF 8 VF-1 - VF-5 ENCLOSURE ASSEMBLY MAY-2010 SAP DOC NO./VER: /
COLLAPSED VIEW EXPLODED VIEW SHEET OF VF- - VF- ENCLOSURE ASSEMBLY 0 A B FRONT AND BACK ENCLOSURE ITEM NO. QTY. FBHCS /- X / SLF-TP W/LOCTITE PATCH DOOR FRONT VF- VF- WINDOW VF- FRONT DOOR HANDLE DOOR
More informationRHINO VALVES WORLDWIDE. Series 44 ISO. Design of three pieces with plate disposition ISO 5211 for their automation.
RHINO VALVES WORLDWIDE Series 44 ISO Design of three pieces with plate disposition ISO 5211 for their automation. The drilled superior portion of the body (ISO5211) allows an easy installation of automation
More informationComprehensive Management of Hydrocarbon Storage Tanks Ageing
ECNDT 2006 - Fr.2.2.2 Comprehensive Management of Hydrocarbon Storage Tanks Ageing Vincent LESUEUR, Mathieu RIETHMULLER, Daniel CHAUVEAU, IS Services, France Abstract. Corrosion generates considerable
More informationCompac-Noz Valves High Performance Non-Slam Check Valves
Compac-Noz Valves High Performance Non-Slam Check Valves Compac-Noz Non-Slam Check Valves Scope of Line and Features Sizes 12" - 60" ASME B16.34 & API 6D, pressure classes 150-4500 API 6A pressure classes
More informationEpic Consolidated Operations LLC Contractor Covered Task List Last updated 9/6/2018
003 Test Breakout Tank Overfill Protective 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective 195.428 Oral 005 Repair Breakout Tank Overfill Protective 195.428 006 Inspection of Breakout
More informationTAB C. Hydrostatic Test Documentation. Hot Tap Summary Schematic (spool map)
TAB C Hydrostatic Test Documentation Hot Tap Summary Schematic (spool map) Secondary Test Section 2016S-11 Hydrostatic Test Shop Report Hydrostatic Test Sketch Pressure Log and Chart Hydrostatic Test Recorder
More informationDominion Energy Questar Pipeline LLC Contractor Covered Task List Last updated 10/3/2017
007 Operate Valves 008 Measurement of Wall Thickness with Ultrasonic Device 103 Non-destructive Testing (Other than testing of welds) -- Mag Particle 104 Non-destructive Testing (Other than testing of
More informationAPPENDIX B CERTIFICATION OF TANK CAR FACILITIES CONTENTS
M-1002 AAR Manual of Standards and Recommended Practices CERTIFICATION OF TANK CAR FACILITIES CONTENTS Paragraph Subject Page 1.0 Introduction..............................................................
More informationCO 2. High Pressure Design. (> 500 psi per API 15HR & 15S) Design Life - 20 years at full rating
Fiberspar Line Pipe (High Pressure - Product Data) OIL & GAS MINING Applications Pipeline Rehabilitation Production Lines or Injection Lines Transfer Lines or Disposal Lines Oil, Gas, Saltwater CO 2 and
More informationWilliams Contractor Covered Task List Last updated 11/7/2017
003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 Oral 005 Repair Breakout Tank Overfill Protective Devices 195.428
More informationENGINEERING & SERVICES PVT LTD
ENGINEERING & SERVICES PVT LTD www.sankalpenggservices.com CERTIFICATIONS About Sankalp Incorporated in 1996, Sankalp focused in Oil & Gas Field Components, primarily OCTG, Well Head, Drilling and Down
More informationPRESSURE BALANCED TYPE LUBRICATED PLUG VALVES General Index
General Index Range and Index...1 Figure Numbering...2 Materials...3-4 Pressure Testing...5 Installation, Marking and Identification...6-7 Desgin Features...8-9 Stress Analysis to the body...10 Components
More informationE D I T I O N /
PRODUCT CATALOGUE EDITION 2017/2018 2 Your specialist in welded stainless steel tubular products 3 4 Welded Stainless Steel Tubular products for every need Content Product standards... 10 Welded tubes
More informationDirect Contact Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More information94D / 94F / 94M / 96M
94D / 94F / 94M / 96M - 2016 1 Meter Runs MBL 500 Application Meter runs combine inlet and outlet piping with a flow element which is used for flow measurement of one-phase aggressive and non-aggressive
More information