Annex of the Certificate (Page 1/5) Scope of Accreditation
|
|
- Richard Snow
- 5 years ago
- Views:
Transcription
1 Annex of the Certificate (Page 1/5) As a "Type A" Inspection Body Address : Esas Maltepe Ofispark Altayçeşme Mah. Çamlı Sokak No:21 Kat:8 Maltepe İSTANBUL/TÜRKİYE Phone : Fax : bv.troffice@tr.bureauveritas.com Website : Product Family, Product / Intended Use Inspection Type / Modules Standards / Specification / Explanations 1. Lifting and Carrying Equipment 1.A.1. Crane 1.A.1.1. Overhead Crane 1.A.1.2. Portal Crane 1.A.1.3 Monorail Crane 1.A.1.4.Mobile Crane 1.A.2. Hoist 1.A.10. Forklift 2. Pressure Vessels 2.A.2 Compressed Air Tank 2.A.3 Compressor Air Tank 2.A.4 Hydrophore/Expansion Tank 2.A.5 Steam Generator 2. Pressure Vessels 2.B.1. Unfired Pressure Vessels 2.B.2. Low Pressured Storage Tanks 2.B.3. Unfired, Designed to Contain Air or Nitrogen Pressure Vessels 2.B.7. Diaphragm Closed Expansion Tanks for Waterworks 2. Pressure Vessels 2.C.1. Unfired Pressure Vessels 2.C.2. Low Pressured Storage Tanks 2.C.3. Unfired, Designed to Contain Air or Nitrogen Pressure Vessels 2.C.7. Diaphragm Closed Expansion Tanks for Waterworks 3. Boilers 3.A.1 Steam Boiler 3.A.2 Heater/Hot Water Boiler 3.A.4 Hot Oil Boiler 3.A.7 Hot Water Boiler 3. Boilers 3.B.1 Power Boilers 3.B.2 Heating Boilers 3.B.3 Steam Boilers 3.B.4 Hot Recovery Steam Generator 3.B.5 Fired Boiler 3.B.6 Water Tube Boiler 3.B.7 Cylindrical Boiler 3.B.8 Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 300 kw Design Control Design Control EN13445 series, PD 5500, ASME BPVC Sec VIII, EN13445 series, PD 5500, ASME BPVC Sec VIII, EN 303 series, EN series, EN series, ASME BPVC Sec I, ASME BPVC Sec IV,
2 Annex of the Certificate (Page 2/5) 3. Boilers 3.C.1 Power Boilers 3.C.2 Heating Boilers 3.C.3 Steam Boilers 3.C.4 Hot Recovery Steam Generator 3.C.5 Fired Boilers 3.C.6 Water Tube Boiler 3.C.7 Cylindrical Boiler 3.C.8 Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 300 kw EN 303 series, EN series, EN series, ASME BPVC Sec I, ASME BPVC Sec IV, 4.A.1 Atmospheric Storage Tanks 4.B.1 Atmospheric Storage Tanks Design Control API C.1 Atmospheric Storage Tanks Piping API 650 ASME B31.1 ASME B31.3 API 570 Pipelines Welded Manufacturing Evaluation and Approval of Welding Procedures ASME B31.4, ASME B31.8 AD 2000 HP2/1, ASME BPVC Sect IX, EN ISO , EN ISO , EN ISO , AWS D1.1, AWS D1.5,
3 Annex of the Certificate (Page 3/5) Machined Metal Components (metal pipes, metal plates, castings) Machined Metal Components (metal pipes, metal plates, castings) Non-destructive Testing Material Evaluation and Approval EN 1515 series, EN ISO 3183, EN 10025series, EN 10028series, EN 10088series, EN 10149series, EN 10204, EN 10208series, EN 10210series, EN 10216series, EN 10217series, EN 10219series, EN 10222series, EN 10273, EN 14870series, ASME BPVC Sect II ASTM A, B Manufacturing EN 1092, EN 1515series, EN 1626, EN ISO 3183, EN 14870series, DIN 1626, API 6D, API 600, API 602, ASME B16.5, B16.9, B16.11, B16.20, B16.25, B16.28, B16.34, B16.47 Radiographic Film Interpretation and Approval Ultrasonic Testing ASME BPVC; Sec I, Sec IV, Sec V, Sec VIII, AWS D1.1, API 5L ASME BPVC: Sec I, Sec IV, Sec V, Sec VIII
4 Annex of the Certificate (Page 4/5) (Non-destructive Testing Devam) Electrical - Grounding Measurements - Lightning Conductor Systems - Electrical Panel Visual Control Solid Casting Loads and Agricultural Products, Transported Through Sea, Road and Rail Vehicles and Container Sea, Road and Rail Transport Vehicles and Container Magnetic Particle Examination and Result Evaluation Liquid Penetrant Testing Visual Testing Amount Control With The Help Of Loading/Discharge Scale Amount Control With The Help Of Loading, Discharge, Storage Scoring, Sampling In Loading, Discharge, Transfer, Storage Warehouse Cleaning Control Warehouse Cover Watertightness Control Seal control, Sealing Surveillance Quantity Determination through Draft Survey Quantitative Determination of Liquids with Ullage Survey ASME BPVC: Sec I, Sec IV, Sec V, Sec VIII, API 5L ASME BPVC; Sec I, Sec IV, Sec V, Sec VIII, AWS D1.1, API 5L ASME BPVC; Sec I, Sec IV, Sec V, Sec VIII, ASME B31.4, EN ISO 5817 Grounding Regulation in Electrical Installations Electrical Internal Installations TS EN , TS EN GSIT.ITD.OPR.WP.02 GSIT.ITD.OPR.WP.03 GSIT.ITD.OPR.WP.05 GSIT.ITD.OPR.WP.06 GSIT.ITD.OPR.WP.07 GSIT.ITD.OPR.WP.08 GSIT.ITD.OPR.WP.04 GSIT.ITD.OPR.WP.23
5 Annex of the Certificate (Page 5/5) Packed Products Quantity determination with Scoring during Loading, Discharge, Storage Packaging and Marking Inspection and Visual Damage Control Sampling in Loading, Discharge, Transfer, Storage End of Scope GSIT.ITD.OPR.WP.03 GSIT.ITD.OPR.WP.09 GSIT.ITD.OPR.WP.10 Kadir Kayıhan CABIOĞLU Deputy Secretary General
6 Annex of the Certificate (Page 1/1) Accreditation Scope / Additional assessment document for this scope : EA 2/17 As a "Type A" Inspection Body Address : Esas Maltepe Ofispark Altayçeşme Mah. Çamlı Sokak No:21 Kat:8 Maltepe İSTANBUL/TÜRKİYE Phone Fax Website : : : bv.troffice@tr.bureauveritas.com : /105/EC Simple Pressure Vessels Module B EU Type Examination 2014/29/EU Annex-II Item 1 Module C Conformity to Type Based on Internal Production Control Module C1 Conformity to Type Based on Internal Production Control Plus Supervised Vessel Testing Module C2 Conformity to Type Based on Internal Production Control Plus Supervised Vessel Checks at Random Intervals End of Scope 2014/29/EU Annex-II Item /29/EU Annex-II Item /29/EU Annex-II Item 3 Kadir Kayıhan CABIOĞLU Deputy Secretary General Note: These scopes are valid only for Notified Body activities in the regulated area
7 Annex of the Certificate (Page 1/1) Accreditation Scope / Additional assessment document for this scope : EA 2/17 As a "Type A" Inspection Body Address : Esas Maltepe Ofispark Altayçeşme Mah. Çamlı Sokak No:21 Kat:8 Maltepe İSTANBUL/TÜRKİYE Phone Fax Website : : : bv.troffice@tr.bureauveritas.com : /68/EU Pressure Equipment Directive Pressure Equipments Module A2 Randomly Inspected Pressure Vessels with Internal Production Control Module B EU Type Examination - Production Type Module B EU Type Examination - Design Type Conformity to Type Based on Module C2 Randomly Inspected Pressure Vessels with Internal Production Control Conformity to Type Based on Module F Verification of Pressure Vessels Conformity based on Module G Unit Verification End of Scope 2014/68/EU Annex III Item /68/EU Annex III Item /68/EU Annex III Item /68/EU Annex III Item /68/EU Annex III Item /68/EU Annex III Kadir Kayıhan CABIOĞLU Deputy Secretary General Note: These scopes are valid only for Notified Body activities in the regulated area
Annex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : Keresteciler Sitesi E Blok No:5 Kat:2 Ostim / Yenimahalle 06170 ANKARA/TÜRKİYE Phone : +90 312 385 95 30 Fax : +90 312 386 00
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest
More informationFACTORIES ACT (CHAPTER 104, SECTION 102 (1)) FACTORIES (REGISTRATION AND OTHER SERVICES FEES AND FORMS) REGULATIONS*
FACTORIES ACT (CHAPTER 104, SECTION 102 (1)) FACTORIES (REGISTRATION AND OTHER SERVICES FEES AND FORMS) REGULATIONS* Arrangement of Provisions 1 Citation. 2 Definitions. 3 Deleted by S 135/2006, wef 01/03/2006.
More informationKKAI Report No Rev 1 Prepared for BioHeatUSA April 28, 2009
1. Summary... 3 2. Background... 3 3. Scope... 3 4. European Suppliers... 4 5. Materials... 4 6. Design... 4 7. Fabrication... 5 8. Examination... 6 9. Inspection... 6 10. Testing... 8 11. Quality Control
More informationtechnical description:
The steel flanged and welded swing check valves are the pipeline valves, preventing automatically a working medium from the back flow. They are used for: - noncorrosive fluids - water - steam - oil - petroleum
More informationSUITABLE FOR EXAMPLES OF USE APPROVALS. Type approval Deutsche Bahn. Requirements. AD 2000 Data sheet A2 DIN EN ISO PED 2014/68/EU
Type test approved atmospheric discharge safety valves for industrial applications Series 8 4.2 8 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and
More informationPETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL
Kenya Bureau of Standards PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL 2016-01-14 Version 2.0 Page 1 1.0 INTRODUCTION 1.1 Purpose and Background This manual provides a frame work for inspection of petroleum
More informationSpecial Projects. Pump Modules. Fluid complete solutions from the KRAL brand. s i n c e PUMPS.
Pump Modules. Fluid complete solutions from the KRAL brand. PREMIUM MANUFACTURER s i n c e 1 9 5 0 PUMPS www.kral.at Expertise and Experience. KRAL AG is a leading company in the field of pump and flow
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSUITABLE FOR EXAMPLES OF USE APPROVALS. TS EC type examination. Requirements AD 2000 Data sheet A2 DIN EN ISO PED 2014/68/EU
Type test approved atmospheric discharge safety valves for industrial applications Series 412 4.3 412 Safety valves made of stainless steel, atmospheric discharge, with threaded connections SUITABLE FOR
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium
More informationSUITABLE FOR EXAMPLES OF USE APPROVALS. Type approval Deutsche Bahn. Requirements AD 2000 Data sheet A2 DIN EN ISO PED 2014/68/EU
Type test approved atmospheric discharge safety valves for industrial applications Series 812 4.4 812 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases
More informationInspection Services Design Appraisal Document
Issue Number: 1 Page 1 of 5 Client : Groth Corporation Subject : Pressure / Vacuum Relief Valves Model Series 1200, 1300, 1400, 1600, 1700 & 1800 Pressure Equipment Type : Safety Accessory PED Category
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DURHAM HOLDINGS CORPORATION INC. DBA MME TESTING 1039 Industrial Court Suwanee, GA 30024 Danny Collazo Phone: 678 730 2000 MECHANICAL Valid To: October 31,
More informationThe globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on
More informationCOMMISSION REGULATION (EC)
L 191/26 Official Journal of the European Union 23.7.2009 COMMISSION REGULATION (EC) No 640/2009 of 22 July 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard
More informationDiaphragm seal with sterile connection With clamp connection (Tri-clamp) Models , and
Pressure Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models 990.22, 990.52 and 990.53 WIKA data sheet DS 99.41 for further approvals see page 7 Applications Sanitary applications
More informationISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements
INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference
More informationInspection field Inspection type and scope Inspection procedure. New and operated equipment according to ADR/RID/IMDG/CSC
Locations: 1 Management 2 Workplace Praha 3 Workplace Plzeň Zikmunda Wintra 21, 320 16 Plzeň 4 Workplace Ústí nad Labem Malátova 14, 400 11 Ústí nad Labem 5 Workplace Brno třída Kpt. Jaroše 25, 602 00
More informationSUITABLE FOR. Steam EXAMPLES OF USE APPROVALS. Type approval WRAS. Type approval ACS. Requirements DIN EN ISO PED 2014/68/EU TRD 421
Type test approved safety valves angle-type for industrial applications Series 642 642 Safety valves made of gunmetal, angle-type with threaded or flange connections SUITABLE FOR Liquids neutral and non-neutral
More informationNCC Leisure Battery Verification Scheme. Leisure Accommodation Vehicles
The UK trade body for the caravan, motorhome, caravan holiday and park home industry. NCC Leisure Battery Verification Scheme Leisure Accommodation Vehicles Page 1 of 11 1 Scope The NCC Battery Verification
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationHopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20
Hopkinsons SCHEDULE OF SHELL BOILER MOUNTINGS Quality assurance Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been
More informationPressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
More informationAN ISO 9001:2008 CERTIFIED COMPANY. Safety Valve
AN ISO 9001:2008 CERTIFIED COMPANY Safety Valve SAFETY VALVE FEATURE : - The Cr-V spring & novel disc & seat design provide reliable bubble tight seal. - Excellent re-seating ability - It features heavy-duty
More informationCATALOG Monolithic dielectric joints
CATALOG Monolithic dielectric joints Monolithic dielectric joints are compact prefabricated structures which guarantee the interruption of electrical continuity in pipeline network. These joints can be
More informationGUIDELINE FOR GLOVEBOXES THIRD EDITION AGS-G001 February 2007
GUIDELINE FOR GLOVEBOXES THIRD EDITION AGS-G001 February 2007 AMERICAN GLOVEBOX SOCIETY STANDARDS DEVELOPMENT COMMITTEE All Rights Reserved Copyright 2007 No portion may be duplicated without written consent
More informationGALLI&CASSINA. Plug Valves. Conical
Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure
More informationSUITABLE FOR. Liquids. Air, gases and vapours. Steam EXAMPLES OF USE APPROVALS. Requirements AD 2000 Data sheet A2 TRD 421 DIN EN ISO
Type test approved safety valves angletype for industrial applications Series 652 3.4 652 Safety valves made of gunmetal, angletype with threaded connections SUITABLE FOR Liquids neutral Air, gases and
More informationtechnical description:
The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME
More information4.1 Type of the valve and materials of construction of body and trim shall be as specified in valve Data sheet.
SHEET 1 OF 5 1.0 GENERAL & SCOPE 1.1 This specification covers the design, material, construction features, manufacture, inspection & testing, Painting and packing requirements of Spring Loaded Bypass
More informationHydraulic Piston Accumulators. Technical Information
Hydraulic Piston Accumulators Technical Information Piston Accumulators Bosch Rexroth 3 Introduction Piston accumulators by Bosch Rexroth are applied in various applications in different industries. As
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K7 Revision No: 1 This is to certify: That the Safety Valve with type designation(s) Safety valves with bellow seal, Types: 06800, 06801, 06805, 06806
More informationSTAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES
STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES modules in industrial design 52 mm 41 mm 25.4 mm Membrane diameter Membrane design 7/6 19/3.3 37/2 19/6 37/3.8
More informationMSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Charter Coating Service (2000) Ltd. Suite
More informationBroetje-Automation Company Standard Structural component specification for welded parts
Broetje-Automation Company Standard Table of Contents Application Area and Purpose 3 1 Structural components pursuant to DIN 1090 4 1.1 Structural component classification 4 1.1.1 Steel components < Strength
More informationInformation for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN
Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN 15085-2 Certificate According DIN EN 15085-2 Railway applications - Welding of railway vehicles and components
More informationGuideline No.: E-03(201806) E-03 MOTORS. Issued date: June 7, China Classification Society
Guideline No.: E-03(201806) E-03 MOTORS Issued date: June 7, 2018 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection and testing
More informationSUITABLE FOR. Liquids. gases and vapours. Steam EXAMPLES OF USE APPROVALS
Type test approved safety valves angle-type for industrial applications 3.2 851 Safety valves made of gunmetal, angle-type with threaded connections Series 851 SUITABLE FOR Liquids neutral and non-neutral
More informationSeries 812. TÜV/CE atmospheric discharge safety valves for industrial applications. Air, gases and vapours
TÜV/CE atmospheric discharge safety valves for industrial applications Series 812 4.4 812 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and vapours
More informationSUITABLE FOR. Liquids. Air, gases and vapours. Steam EXAMPLES OF USE APPROVALS
Type test approved safety valves angle-type for industrial applications Series 851 3.2 851 Safety valves made of gunmetal, angle-type with threaded connections SUITABLE FOR Liquids neutral and non-neutral
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT CLEVELAND 5405 East Schaaf Road Cleveland, OH 44131 Jeffry J Smith Phone: 216 524 1450 Jeffry.Smith@element.com MECHANICAL Valid To: October 31, 2018
More informationMATERIALS & STANDARDS
GLAUNACH THE SILENCER HANDBOOK MATERIALS & STANDARDS ENSURING SUISTAINABLE QUALITY AND SAFETY IN OPERATION GLAUNACH GMBH 2010 ALL RIGHTS RESERVED Part V page 2 of 7 1. SILENCER STANDARD MATERIALS All materials
More informationGuideline No.: E-03(201610) E-03 MOTORS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-03(201610) E-03 MOTORS Issued date: October 28,2016 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection and
More informationBioprocessing Equipment
ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment A N I N T E R N A T I O N A L S T A N D A R D ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment AN AMERICAN NATIONAL STANDARD
More informationStandards Pertaining to Valves Used in the Oil & Gas Industry
PDHonline Course M159 (2 PDH) Standards Pertaining to Valves Used in the Oil & Gas Industry Instructor: Peter Smith, HNC (Mech) 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
More information1541/1543 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 11/2014 Consolidated * Valves 1541/1543 Series Safety Valve Designed for steam and other compressible fluids, these valves are most commonly used in pharmaceutical,
More informationDecree of the Ministry of Transport and Communications
579/2000 Decree of the Ministry of Transport and Communications on transportable pressure equipment and tanks discharged or filled by pressure and used for the transport of dangerous goods Adopted in Helsinki,
More informationSafety is our first priority TM
Safety is our first priority T Catalog No. -2013.YP1 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED
More informationSAFETY VALVES. Series 560 & Aquatrol Safety/Relief Valves SERIES. ASME Section I & VIII - NB Certified for Air, Gas and Steam
SAFETY VALVES ASME Section I & VIII - NB Certified for Air, Gas and Steam SIZES FROM 1/2 TO 2 1/2 NB RATED TO 250# TEMPERATURES TO 406 O Aquatrol s Series / valve line is a high capacity safety valve used
More informationMulti-port Diaphragm Valve, Forged stainless steel body
Fully machined from SS 316L bar-stock no welded components Increased security no internal fabrication welds Reduced dead leg based on orientation Greater structural integrity Fewer fittings, welds and
More informationAnnexes or Articles of Directive. Granted accreditation
No of NB Name and address of NB Directives Procedures/ /AVCP system Annexes or Articles of Directive Granted accreditation Schemes accreditation A c c e s s 1* / + Further is needed to assess (access +)
More informationYellow Point. Catalog No YP.1
Yellow Point Catalog No. -2014.YP.1 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
More information[DRAFT VERSION] For use for company in Europe who will place the product on the market. Please amend which necessary. Document No:
Three-Piece ball valve EA-307 Series PED Category I, II EA-307 User Manual English Version [DRAFT VERSION] For use for company in Europe who will place the product on the market. Please amend which necessary.
More informationAnnex to the Accreditation Certificate D IS according to DIN EN ISO/IEC 17020:2012
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D IS 14153 02 01 according to DIN EN ISO/IEC 17020:2012 Period of validity: 16.04.2015 to 14.04.2020 Date of issue: 16.04.2015
More informationYellow Point. Catalog No YP.2
Yellow Point Catalog No. 8-15.YP.2 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
More informationWELMEC External Auxiliary Power Supply of Electrical Energy Meters
WELMEC 11.8 2018 External Auxiliary of Electrical Energy Meters WELMEC is a cooperation between the legal metrology authorities of the Member States of the European Union and EFTA. This document is one
More informationGuideline No.M-10(201510) M-10 Marine Diesel Engine Fuel Injection Pump
Guideline No.M-10(201510) M-10 Marine Diesel Engine Fuel Injection Pump Issued date: 20 th October, 2015 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains technical
More informationInsulating joint IK. Insulating joint IK. RMA Kehl GmbH & Co. KG Oststrasse 17 D Kehl / Germany
Insulating joint IK RMA Kehl GmbH & Co. KG Oststrasse 17 D-77694 Kehl / Germany info@rma-kehl.de www.rma-armaturen.de 1 Monoblock insulating joints are boltless, rigid pipeline components, factory-welded
More informationHigh performance valves for high level expectations PROUDLY MADE IN ITALY
High performance valves for high level expectations Location ERREESSE, established in 2004, is a manufacturing company based in the Northern Italy, Grignasco, a nice town in the green Valsesia (Sesia Valley),
More informationANNEX 2. Scope of Works 1.0. Introduction. The United. joint pipes and lengths, iv items. and testing. all tests and 2.0.
ANNEX 2 Pre Shipment Inspectionn and Testing of Ductile Iron Pipes Scope of Works 1.0 Introduction The United Nation intends to procure ductile iron pipes, fittings and valves from China and Italy. The
More informationLAR Training. Series 8000 Pneumatic Safety Shut Off Valves Mark Lampe May,
LAR Training Series 8000 Pneumatic Safety Shut Off Valves Mark Lampe May, 18 2015 Series 8000 Pneumatic Valve Unique vertical space saving design Maintenance free gas and fluid seal that eliminates packing
More informationHEADQUARTERS. President : Alparslan KURTMEN. Production (old) (closed area) : İzmir m². Production (new) (closed area) : İzmir 12.
HEADQUARTERS President : Alparslan KURTMEN Production (old) (closed area) : İzmir 3.500 m² Production (new) (closed area) : İzmir 12.500 m² Established at 1991 AREAS : İzmir, İstanbul, Bursa, Ankara, Konya
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationSKN_N0106AnnexJ_R2. Annex J - Specific requirements for PVT collector Certification. 1. Introduction and definition
Annex J - Specific requirements for PVT collector Certification 1. Introduction and definition PVT collectors (named hybrid collectors in ISO 9806) generate heat and electric power at the same time. They
More informationCompac-Noz Valves High Performance Non-Slam Check Valves
Compac-Noz Valves High Performance Non-Slam Check Valves Compac-Noz Non-Slam Check Valves Scope of Line and Features Sizes 12" - 60" ASME B16.34 & API 6D, pressure classes 150-4500 API 6A pressure classes
More informationMSC Guidelines for Fired Thermal Fluid Heaters Procedure Number: E1-28 Revision Date: 06/11/2014
References P. W. Gooding, Chief of Engineering Division a. 46 CFR Part 52 Power Boilers b. 46 CFR Part 54 Pressure Vessels c. 46 CFR Part 63 Automatic Auxiliary Boilers Contact Information If you have
More informationECOLINE GTC Type Series Booklet
Gate Valve ECOLINE GTC 150-600 Class 150-600 NPS 2''-36'' Cast Steel / Stainless Steel Bolted Bonnet Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet ECOLINE GTC 150-600
More informationANSI Valve Standards. API Valve Standards
ANSI Valve s ANSI - the American National s Institute standardization and conformity assessment system. Code Name ANSI A126 ANSI A181 ANSI 816.10 ANSI 816.34 ANSI 8127.1 Grey iron castings for valves flanges
More informationSTEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES
STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES More than 20 years of experience in design and manufacturing and service of custom made actuated Steamextraction Check valves for the Power Generation
More informationRule No. 1. Scope Definitions Periodicity of technical inspections Technical inspection Inspection requirements...
Submitted by the Co-Chairs of the IWG on PTI Informal document WP.29-171-21 171 st WP.29, 14-17 March 2017, Agenda item 7.3) PROPOSALS FOR NEW RULE ON PERIODICAL TECHNICAL INSPECTIONS OF MOTOR VEHICLES
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Packaged reciprocating gas compressors
INTERNATIONAL STANDARD ISO 13631 First edition 2002-08-01 Petroleum and natural gas industries Packaged reciprocating gas compressors Industries du pétrole et du gaz naturel Unités de compresseurs alternatifs
More informationVertical & Horizontal Bladder Tank Foam Storage Devices Model MXC
1 General description The KCA bladder tank together with KCA ratio controllers, form a balanced pressure proportioning system used to mix water and firefighting foam concentrate together to produce an
More informationTechnical Webinar FSSC Q. Jules Rojer, Technical Advisor FSSC 22000
Technical Webinar FSSC 22000-Q Jules Rojer, Technical Advisor FSSC 22000 Mission Statement To be the world s leading, independent, GFSI recognized, ISO based food safety and quality management system for
More informationNational Board Update
National Board Update Presentation to the Valve Repair Council June 2, 2016 Prepared by: Joseph F. Ball, P.E. National Board Update National Board activities Who we are and what we do National Board Inspection
More informationNoble Energy Contractor Covered Task List Last updated 2/20/2019
003 Test Breakout Tank Overfill Protective Devices 195.428 Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices 195.428 005 Repair Breakout Tank Overfill Protective Devices 195.428
More informationGREENER SHIPPING SUMMIT 2017
GREENER SHIPPING SUMMIT 2017 EU MRV Regulation Methods of Data Collection of Fuel Differences/Consequences/Evaluation of Methods Antonios Georgantzis 14 November 2017 Eugenides Foundation The EU MRV Timeline
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ
More informationThe Implementation of a Storage Facility Inspection Program. Presented By: John R. Rueckel PCA Engineering, Inc.
The Implementation of a Storage Facility Inspection Program Presented By: John R. Rueckel PCA Engineering, Inc. Storage Facility Inspection Why implement an inspection program? Regulatory Requirements
More informationAWRF Associated Wire Rope Fabricators
AWRF Associated Wire Rope Fabricators Recommended Practice and Guideline Disclaimer for version of AWRF Recommended Guideline for Proof Test Procedures for Slings Part I: Alloy Chain Slings Associated
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK retby usiness Park Ashby Road Stanhope urton upon Trent Staffordshire DE15 0YZ Contact: Mr R M Allen Tel: +44 (0)1283 216334 Fax: +44 (0)1283
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14839-4 First edition 2012-03-15 Mechanical vibration Vibration of rotating machinery equipped with active magnetic bearings Part 4: Technical guidelines Vibrations mécaniques
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 19880-1 First edition 2016-07-01 Gaseous hydrogen Fuelling stations Part 1: General requirements Carburant d hydrogène gazeux Stations-service Partie 1: Exigences générales
More informationAIR LUBRICATION SYSTEM INSTALLATION
Guide for Air Lubrication System Installation GUIDE FOR AIR LUBRICATION SYSTEM INSTALLATION OCTOBER 2018 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 2018
More informationThis annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
s where activities are performed under accreditation Abbreviation/ location code Delftweg 144 3046 NC terdam Applus RTD Netherlands neveld Anthonie Fokkerstraat 10 3772 MR neveld Applus RTD Netherlands
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer
More information026-2 : 1996 CEB STANDARD
026-2 : 1996 CEB STANDARD COMPRESSION CONNECTORS & TERMINATIONS FOR OVERHEAD LINE CONDUCTORS CEYLON ELECTRICITY BOARD SRI LANKA CONTENTS 1. Scope 2 2. System Parameters 2 3. Service Conditions 2 4. Applicable
More informationTOFD on Weld Seams. New Prestandard CEN/TS : professional customer focused cost aware. ECNDT 2006 Berlin, September 2006 We.2.7.
professional customer focused cost aware New Prestandard CEN/TS 14751 : TOFD on Weld Seams ECNDT 2006 Berlin, 25.-29. September 2006 We.2.7.2 Dr.-Ing. Andreas Hecht Plant Inspection / Materials Engineering
More informationSUITABLE FOR EXAMPLES OF USE APPROVALS. Requirements PED 2014/68/EU
Overflow and pressure control valves Series 630 6.10 630 Overflow and pressure control valves made of gunmetal, straightway form with threaded connections externally adjustable SUITABLE FOR Liquids neutral
More informationNotice of the Maritime Safety Administration of the People s. Republic of China on Strengthening the Supervision and
HCJ [2016] No.48 Notice of the Maritime Safety Administration of the People s Republic of China on Strengthening the Supervision and Administration on Emission Control Areas for Vessels All relevant units,
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV
More informationEXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
More informationHorizontal Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Horizontal Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
More informationThermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 74-06 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry,
More informationGeneral Technical Approval
General Technical Approval German approval body for construction products and types of construction Construction Testing Authority Authority of the German Länder Governments for a uniform fulfilment of
More informationVertical Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Vertical Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
More informationThermowell For sanitary applications Model TW61, for orbital welding
s For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 for further approvals see page 5 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical
More informationTechnoflex HT HT PLUS SO TS
Technoflex HT HT PLUS SO TS Heating systems Cooling water systems Solar systems Diaphragm expansion tank. Temperature reduction tank TECHNOFLEX HT Expansion tanks with a replaceable diaphragm Applications:
More information