Inspection field Inspection type and scope Inspection procedure. New and operated equipment according to ADR/RID/IMDG/CSC

Transcription

1 Locations: 1 Management 2 Workplace Praha 3 Workplace Plzeň Zikmunda Wintra 21, Plzeň 4 Workplace Ústí nad Labem Malátova 14, Ústí nad Labem 5 Workplace Brno třída Kpt. Jaroše 25, Brno 6 Workplace Ostrava Teslova 2, Ostrava Přívoz 7 Vehicle Certification Section number Inspection field Inspection type and scope Inspection procedure 1* Inspection of according to the European Agreement on Transport of Dangerous Goods by Road (ARD), Regulations Concerning the International Transport of Dangerous Goods by Rail (RID), International Maritime Dangerous Goods Code (IMDG) and International Convention for Safe Containers CSC 2* Inspection of pressure 3 Reserved New and operated according to ADR/RID/IMDG/CSC New and operated pressure 4* Inspection of machinery New and operated machine, including the measurement of noise and vibrations 5* Inspection of electrical 6* Verification and approval of welding and soldering procedures 7* Inspection at specific assessment of metallic materials 8* Inspection of folk amusement devices New and operated electric, including EMC measurement Welding and soldering procedures within manufacture, repair, erection and reconstruction Specific assessment within manufacture, repair, erection and reconstruction Operated with mobile stands of persons, with limited movement of persons, playground, with possible fall from height over 40 cm, with possibility of higher mental stress E th edition E th edition E th edition E th edition E th edition E nd edition E rd edition Page 1 of 6

2 number Inspection field Inspection type and scope Inspection procedure 9* Inspection of lifts and lifting 10* Inspection of ski tows and cableways Operated lifts and lifting Including: E inspection of operated lifts I assessment of operating risks of I the operated lifts inspection of operated cranes and I lifting special assessment of operated cranes and lifting inspection of operated working platforms assessment of operating risks of escalators and moving walks New and relocated ski tows/cableways 11* Assessment of functional safety New and operated electrical/electronic/programmab le electronic safety-related systems, safety instrumented systems and products in combination with machinery. 12* Inspection carried out within the supervision of testing and checking of production samples carried out at the manufacturer or third party facility Type B and D testing laboratory activity according to the Directive 2007/46/EC, as amended I I I nd edition E rd edition E rd edition E nd edition 2) Asterisk at the ordinal number identifies that within the scope of accreditation, the is allowed to include new/updated/revised normative documents for the conformity assessment from time to time. Updated list of normative documents provided within the flexible scope of accreditation is available at the from the Manager. E 540 xxx Identification of internal procedure of the, I xx Instruction to the procedure Page 2 of 6

3 Assessment of conformity for authorization/notification Product/Product group name Conformity assessment number procedure/module Standards/normative documents 1* Transportable pressure - acc. to 2 p. 2, a) - acc. to 2 p. 2, b) - acc. to 2 p. 3 Gov. Reg. No. 208/2011 2* Products from the viewpoint of noise emission acc. to the Annex No. 1 of the GR No. 9/2002 3* Equipment from the viewpoint of electromagnetic compatibility 2 p. 1 Directive 2014/30/EU and 2 GR No. 117/2016 4* Subsystems and safety components for cableways according to article 2 par. 1 within the meaning of article 3 par. 2 and 4. of the Gov. Reg. No. 208/ /35/EU) - 6, p. 2-7, p , p. 1 (E , 8th edition) Gov. Reg. No. 9/ /14/EC) - 5 p. 1, a) + Annex 5-5 p. 1, b) + Annex 6-5 p. 1 c) + Annex 7-5 p. 2 + Annex 8 (E , 1th edition) Gov. Reg. No. 117/ /30/EU) part A Annex 3- module B Directive 2014/30/EU - Annex III module B (E , 1th edition) Regulation (EU) 424/2016, art. 18 p. 2. a) b) and c) a) module B Annex III. in combination with: i) module D Annex IV. Page 3 of 6 ADR / RID as amended List of reference standards: acc. to the chap. 6.2 ADR/RID acc. to the chap. 6.8 ADR/RID ČSN EN ISO 3744:2011 ČSN EN ISO 3746:2011 Annex No. 3 of the GR No. 9/2002

4 Product/Product group name Conformity assessment number procedure/module Standards/normative documents Regulation (EU) 424/2016 5* Elevators and safety components acc. to 1 p. 2 and 3 GR No. 122/2016 Elevators and safety components 1 p. 1 of the Directive 2014/33/EU ii) module F Annex V. b) module G Annex VI. c) module H1 Annex VII. (E , 3rd edition) Gov. Reg. No. 122/ /33/EU) - Annex 4 module B - Annex 5 final inspection of elevators - Annex 6 and 10 module E - Annex 7 module H - Annex 8 module G - Annex 9 module C2 - Annex 11 module H1 - Annex 12 module D Directive 2014/33/EU - Annex IV module B - Annex V final inspection of elevators - Annex VI and X module E - Annex VII module H - Annex VIII module G - Annex IX module C2 - Annex XI module H1 - Annex XII module D (E , 6th edition) Page 4 of 6

5 Product/Product group name Conformity assessment number procedure/module Standards/normative documents 6* Pressure acc. to 1 p. 2 of GR No. 219/2016 and materials acc. to 12 Pressure 1 p. 1 and materials 15 of Directive 2014/68/EU 7* Selected products for the assessment of conformity acc. to the Annex No. 2, no. 6 Folk amusement devices 8* Selected and its parts and materials acc. to 12 p. (2) of the Regulation No. 358/2016 Gov. Reg. No. 219/ /68/EU) - Annex 1, p , Annex 3 - modules A2, B, C2, D, D1, E, E1, F, G, H, H1-12 Directive 2014/68/EU - Annex I, p , Annex III - modules A2, B, C2, D, D1, E, E1, F, G, H, H1 - Clause 15 (E , 6th edition) Gov. Reg. No. 173/ (E , 3rd edition) Regulation No. 358/2016, 15, p. 1 and 2, Conformity Assessment Procedures: A1, B, B1, D, D1, E, E1, F, F1, G 12, - a)- p. 1. and 2. - b)- p. 1., 2., 3., 4. and 5. (except selected acc. to the p. 6.) - c)-p. 1.,2.and 3. - Annex No. 2, part A (E , 4th edition) Page 5 of 6

6 2) Asterisk at the ordinal number identifies that within the scope of accreditation, the inspection body is allowed to include new/updated/revised technical specifications listed in the "Standards covering basic requirements" section for the assessment of conformity with safety requirements. The precondition is that the product area, regulations and conformity assessment procedure must not change. Updated list of normative documents provided within the flexible scope of accreditation is available at the from the Manager. Page 6 of 6