ELD Series - DC Motor Drive

Transcription

1 ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended trouble free operation in mobile hydraulic applications. The compact design allows the coolers to fit most equipment and provides the highest cooling performance in heat dissipation while minimizing space required. Features Most coolers are designed with the inlet/outlet ports facing toward the back to help reduce fittings ll coolers feature a built in thermostat port 12 and 24 volt D fans Up to 47 P cooling capacity Rated flows up to 47 gpm Motor lifetimes up to 10,000 hours vailable with internal pressure or thermal bypass General ydraulic Symbol Sizes pplications gricultural Railways utomotive Material andling Sizes 5-6 onstruction Forrestry ousing elded Steel eat Exchanger luminum eavy Duty ar and Plate Fan Plastic Mounting Orientation ny Orientation Maximum Pressure 230 psi (16 ar) Fluids Mineral oil to DIN Part 1 and 2 mbient Temperature 50º 104ºF (10º 40º) Maximum Oil Temperature 266ºF (130º) Standard irflow Direction ir pulled across heat exchanger Filtration ISO/DIS 4406 ode 19/16- Filtration Grade 25>75 Environmental Protection lass IP68 Standard Fan onnector MP ode INNOTIE FLUID POER M M M Utility

2 Model ode Model ELD = ir ooled Oil ooler with D Motor Drive Size Modification Number (latest version always supplied) Motor Drive oltage 12 = 12 volt D 24 = 24 volt D ir Flow Direction S = Suction (standard) = lowing (consult factory) ccessories (omit) = None TS-120 = Inline Thermostat, Fixed 120º F TS-140 = Inline Thermostat, Fixed 140º F (dditional set points available - onsult factory) TS-160 = Inline Thermostat, Fixed 160º F F = Optional foot mount IT = Thermostatic bypass valve IP = Integrated pressure bypass valve Opening Temperature (IT Only) Opening Temp. losing Temp. 45 = 113 F (45 ) 131ºF (55º) 50 = 130 F (55 ) 150ºF (65º) 60 = 140 F (60 ) 158ºF (70º) Opening Pressure Drop (IT & IP Only) 2 = 2 bar (29 psi) 3 = 3 bar (45 psi) 4 = 4 bar (58 psi) (IP) Specifications Size Motor apacity (k) 12v / 24v urrent Draw (mps) 12v / 24v In-Rush urrent (@20ms) Fan Diameter (mm) / (in) ELD S F X X Noise Level da* (1 Meter) ELD / / / / ELD / / 8 80 / / ELD / / 11 80/ / ELD / / / / ELD / / / / ELD / / / / ELD / / / / *The noise levels are only a guide as acoustic properties vary and depend on the characteristics of the room, connections, viscosity, and resonance. eight (lbs.) INNOTIE FLUID POER 9

3 ELD Series eat Dissipation ooling capacity depending on oil flow and the temperature differential T between the oil inlet and air temperature. eat Dissipation (P) Pressure Drop (PSI) eat ΔT = 72ºF (Tolerance: ± 5%) Pressure 30 cst (Tolerance: ± 5%) Oil Flow [GPM] Oil Flow [GPM] For other viscosities, the result must be multiplied by the K factors below K Factor hart ELD INNOTIE FLUID POER ELD-2 ELD-1.5 ELD-2 ELD-4 ELD-6 ELD-5 ELD-4.5 ELD-4 ELD-3 ELD-6 ELD-3 ELD-5 ELD-4.5 iscosity (SSU) iscosity (cst) K Factor

4 ELD Series Dimensions Size 1.5 (3X) D D E F J K L U X Y Z /2" NPT /16"-12 (F) 1-1/16"-12 (F) Sizes 2-4 (3X) D Size D E J K L U X Y Z ELD /2" NPT Ø.39x0.55 slot 1-5/16"-12 (F) 1-5/16"-12 (F) ELD /2" NPT Ø.39x0.55 slot 1-5/16"-12 (F) 1-5/16"-12 (F) ELD /2" NPT Ø.41x0.5 slot 1-5/16"-12 (F) 1-5/16"-12 (F) Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches. (6X) øx L (6X) ØX L (2X) F (2X) K (2X) K ir Flow ir Flow INNOTIE FLUID POER 11

5 ELD Series Dimensions Sizes 4.5 D E J K L U X Y Z /2" NPT /8"-12 (F) 1-5/8"-12 (F) Sizes 5-6 (4X) D (2X) L (8X) ØX L K (2X) K Size D E J K L U X Y Z (2X) D (4X) ØX ELD /2" NPT Ø.39x0.55 slot 1-5/8"-12 (F) 1-5/8"-12 (F) ELD /2" NPT Ø.39x0.71 slot 1-5/8"-12 (F) 1-5/8"-12 (F) 12 INNOTIE FLUID POER ir Flow ir Flow Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches.

6 ELD Series - Mounting Foot racket Dimensions Sizes 2-4 / mm mm R5 (4x) mm mm mm mm mm mm mm 3x ø mm mm mm mm mm mm mm Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print. Dimensions are in inches/mm mm mm mm R5 (4x) mm INNOTIE FLUID POER 13