STS Directory Accreditation number: STS 0630
|
|
- Harriet Marshall
- 6 years ago
- Views:
Transcription
1 International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TÜV SÜD Schweiz AG Geschäftsbereich Process Safety WRO Mattenstrasse 24 CH-4002 Basel Head: Mischa Schwaninger Responsible for MS: Manfred Eiche Telephone: Internet: Initial accreditation: Current accreditation: to Scope of accreditation see: (Accredited bodies) Scope of accreditation as of Testing laboratory for safety testing in the field of chemistry, protection against explosion and fire, electrostatics, storage, transport Dusts Combustible dust solids Determination of the median value, particle size distribution measurement Bulk density Melting point Material characteristics of combustible dusts Determination of the minimum ignition energy using the MIKE 3 ISO DIN EN ISO 60 OECD 102 EN ASTM E / D peo/bgs 0630stsvz englisch 1/7
2 Determination of the explosion indices using the 20 litres apparatus Determination of the lower and upper explosion limit using the 20 litres apparatus Determination of the limiting oxygen concentration using the 20 litres apparatus Determination of the combustibility of deposited dust Determination of the ignition temperature of airborne dust Determination of the thermal stability under air stream (according Grewer) Test of impact sensitivity according Lütolf and BAM Explosion test of airborne dust in the modified Hartmann tube Ignition test for dust layer ISO 6184 part 1+2 EN to - 4 EN ISO 6184 part 1+2 EN , EN ASTM E OECD 113 ESCIS, vol. 1, 3rd Edition Sensitivity to friction test, UN 3b Hot storage test Relative Self-Ignition-temperature Determination of the spontaneous ignition behavior of dust accumulations DIN EN Spontaneous decomposition test Determination of the smoldering temperature (glow temperature) EN / D peo/bgs 0630stsvz englisch 2/7
3 Bowes-Cameron wire basket test (self-heating substances) for transport classification Determination for the self-heating properties through hydration RID, 2000 UN N.4 Measurement of the bulk powder resistance and the resistivity DIN IEC DIN Solids, pastes Rate of combustion, UN N.1, Solids, liquids and suspensions Determination of the thermal stability in an open cup according Lütolf Determination of the thermal stability with the RADEX calorimeter Measurement of exotherm decomposition and pressure increase in the closed system (Mini-autoclave) Sensitivity to heat test (Koenen test) Heat accumulation storage test (Dewar flask) Determination of the flash-point according Cleveland (open cup) Determination of the pyrophoric properties for transport classification ASTM E487, OECD 113 ESCIS, Heft Nr.1, 3. Auflage ASTM E , UN 1b/2b, UN E.1 UN H.4 DIN EN ISO 2592, RID 2000, UN N.2, N.3 Oxidizing properties, UN O.1, UN O.2, UN O.3 Determination of the amount of peroxides in liquids for transport classification Flammability and gas production in contact with water Time/pressure-test, Dutch pressure vessel test RID 2000, UN N.5 UN C.1, UN E.2 Japan Fire Service Law, / D peo/bgs 0630stsvz englisch 3/7
4 UN gap test Explosive properties in the closed pressure vessel test (mini-autoclave according to Whitmore) UN 1(a), 2(a), UN A.5 Validated internal procedure 3 liquids Determination of the flash point (closed cup, Abel-Pensky) Determination of the flash point (closed cup, Pensky-Martens) Sustained combustion test for transport classification Corrosive properties for transport classification DIN EN ISO 1523, ISO13736, IP170 DIN EN ISO 2719, ASTM D 93, RID, 2000 DIN ISO 2592, EN ISO 9038 UN L.2 UN C.1 Vapor pressure (analog : Regulation (EC) No. 440/2008) Liquids and gases Combustible gases, solvent vapors Plastics Construction materials (solid), textiles, packaging material, installation components Density Viscosity Measurement of the conductivity Determination of the auto-ignition temperature Ignition temperature at raised pressure and/or reduced O2-concentration Determination of the explosion indices Determination of the lower and upper explosion limit Determination of the limiting oxygen concentration Self-ignition and flash ignition temperature of plastic material Measurement of the surface resistance ASTM D , ASTM D , DIN 53015, EN ISO DIN 51412, part 1 DIN 51794, Regulation (EC) No. 440/2008, test A.15 (analog : Regulation (EC) No. 440/2008 A.15, PTB) EN 14034, ISO 6184 EN 13463, DIN 1319 EN 14034, EN 1839, ISO 6184 EN 13463, DIN 1319 ISO 6184 EN 13463, DIN 1319 ASTM D , ISO 871 DIN IEC 60093, EN / D peo/bgs 0630stsvz englisch 4/7
5 Fabrics and textiles Films and plates Flexible intermediate bulk containers (FIBC) Grounding connections of machines and installations Footwear Chargeable objects Construction materials and components Measurement of the resistance and the resistivity Determination of the electrostatic properties Determination of the breakdown voltage Measurement of the electrostatic properties Determination of the resistance to earth Measurement of the electrical conductivity Measurement of the electrostatic potentials and charges Charge transfer measurement with coulometer Determination of the combustibility grade Determination of the smoke intensity Determination of the heat of combustion Test for non-combustibility DIN IEC 60093, EN DIN EN 60243, VDE 0303 part 21 IEC ed 2 IVSS 2017 (G) TRBS 2153, DIN EN EN IEC TRBS 2153 CLT/TR EN IEC VKF: Fire protection standard directive for fire brigade regulations: Construction materials, SN , DIN 4102, DIN 50051, DIN 51622, EN-ISO *, EN ISO 1716*, EN ISO 1182*, EN Floor coverings Test of the resistance to earth TRBS 2153, EN 1081 DIN EN SN Chemical and physical reactions reaction calorimeter Calvet calorimeter Thermal Activity Monitor (isothermal storage test) Accelerating Rate Calorimeter (ARC) Vent-Sizing Package (VSP2) ASTM E , DIN UN H.3 DIERS Methodology / D peo/bgs 0630stsvz englisch 5/7
6 Sample preparation High potency compounds and highly toxic substances Differential Scanning Calorimetry (DSC) Thermogravimetric Analyzer (TGA) Detection and Identification of decomposition gases Sample preparation in the Glove Box Explosion test of airborne dust in the closed Hartmann tube OECD 113, ASTM E , DIN 51005, ISO (according ) Determination of the minimum ignition energy in the closed Hartmann tube (according EN 13821) Determination of the explosion indices using the 20 litre apparatus Determination of the combustibility of deposited dust (according ISO 6184 part 1+2, EN 14034, ) (according ) Impact sensitivity test (according A.14, UN 3a) Friction sensitivity test (according UN 3b) Spontaneous decomposition test (according ) Measurement of the bulk powder resistance and the resistivity Differential Scanning Calorimetry (DSC) Calvet calorimetry (according IEC 60093) / D peo/bgs 0630stsvz englisch 6/7
7 *) This accredited body is designated / notified body (NB 2139) for - CH Legislation: Federal Law SR / Ordinance SR / MRA Mutual Recognition Agreement SR EU REGULATION (EU) No 305/2011 Construction products - Horizontal notification according to Ordinance SR , art. 22 (7) for reaction to fire. Corresponding testing standards (*) are published in the above table. Product standards are published in the Nando (New Approach Notified and Designated Organizations) Information System under NB 2139, see: * / * / * / * / * / D peo/bgs 0630stsvz englisch 7/7
About us. TÜV SÜD Process Safety
About us TÜV SÜD Process Safety Since more than 30 years we provide high quality services in the fields of risk analysis, thermal process safety, chemical reaction hazards, explosion protection, ignition
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Nordic Camp Supply Kabul (HKIA) Fuel Testing
More informationSTS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
More informationFlash Point Process Analyzer
Norms and standards ASTM D 56 ASTM D 93; DIN EN ISO 2719; IP 34 DIN EN ISO 13736; IP170 DIN 51755 Application The BARTEC BENKE Flash Point Process Analyzer (FPA-4) is a continuously measuring analyzer,
More informationAnnex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
More informationStandard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
More informationPerformance Comparison and Selection of Transformer Fluid
Performance Comparison and Selection of Transformer Fluid Yang LU 1 Shi Jia LIU 2 Locomotive & Car Research Institute, China Academy of Railway Sciences, Beijing, China Beijing Zongheng Electro-Mechanical
More informationSolid biofuels Determination of total content of sulfur and chlorine
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16994 Second edition 2016-07-01 Solid biofuels Determination of total content of sulfur and chlorine Biocombustibles solides Détermination de la
More informationHigh-Pressure Differential Scanning Calorimetry
Analyzing & Testing High-Pressure Differential Scanning Calorimetry Up to 15 MPa DSC 204 HP DSC 204 HP Phoenix Highlights The versatile high-pressure DSC 204 HP Phoenix is part of our successful 200 series.
More informationFREQUENTLY ASKED QUESTIONS (FAQs)
FREQUENTLY ASKED QUESTIONS (FAQs) What are the Petrochemicals? Any chemical derived from crude oil,crude products or natural gas. Where the petrochemicals are used? In the manufacture of Synthetic rubber,
More informationEx m Solenoid Operator Type 0519
nass magnet GmbH Eckenerstrasse 4-6 D-30179 Hannover Doc. No. 113-720-0002 Revision No. 2 01.06.2015 Ex m Solenoid Operator Type 0519 Operating Instructions Dear Customer! To ensure the function and for
More informationINF.19 Economic Commission for Europe Inland Transport Committee. References to standards in RID/ADR/ADN and UN Model Regulations
INF.19 Economic Commission for Europe Inland Transport Committee Working Party on the Transport of angerous Goods 6 September 2010 Joint Meeting of the RI Committee of Experts and the Working Party on
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
More informationIgnition Temperatures of R1234yf
Ignition Temperatures of R1234yf Content Intention Self ignition phenomena Influences on IT Analysis of published IT Consequences if MIT is used Further thoughts Summary/Conclusions 24.01.2014 3rd Meeting
More informationPyrophoric Ignition Hazards in Typical Refinery Operations
Pyrophoric Ignition Hazards in Typical Refinery Operations CAER Safety Summit Meeting December 2010. Doug Jeffries Chief Fire Protection Engineer Agenda. Definitions and chemistry of pyrophorics Conditions
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
More informationPetroleum industries are dealing with different hazardous materials starting from storing, processing and distributing the petroleum products These he
FIRE SAFETY OF PETROLEUM INDUSTRIES By- Debapriya Biswas Additional Director General West Bengal Fire & Emergency Services Petroleum industries are dealing with different hazardous materials starting from
More informationSources of Ignition and Hazardous Area Classification Core
Sources of Ignition and Hazardous Area Classification Core Likelihood of Ignition Factors of Explosion What factors influence the likelihood of explosion? We must work to prevent loss of containment and
More informationISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
More informationGuidance Document. Controlling Quantities of Hazardous Chemicals in Fire Control Zones
Guidance Document Controlling Quantities of Hazardous Chemicals in Fire Control Zones Overview: The EHS department monitors lab activities for type, quantities and proper storage of hazardous materials.
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Section 1: Chemical Product and Company Identification Part Number: Description: Customer Description: Customer Part Number: National Stock Code: U-BPU60-66 Lithium ion rechargeable
More informationØ Operating Voltage 3.8
LTC Batteries SL-889 Size: 1 10D XOL extended operating life Performance Data (Typical values for batteries stored at +5 C for one year) System Lithium Thionyl Chloride Nominal voltage 3.6 V Nominal capacity
More informationAppendix A.1 Calculations of Engine Exhaust Gas Composition...9
Foreword...xi Acknowledgments...xiii Introduction... xv Chapter 1 Engine Emissions...1 1.1 Characteristics of Engine Exhaust Gas...1 1.1.1 Major Components of Engine Exhaust Gas...1 1.1.2 Units Used for
More informationSAFETY TRAINING LEAFLET 04 NITROUS OXIDE
SAFETY TRAINING LEAFLET 04 NITROUS OXIDE Doc 23.04/18 EUROPEAN INDUSTRIAL GASES ASSOCIATION AISBL AVENUE DES ARTS 3-5 B 1210 BRUSSELS Tel: +32 2 217 70 98 Fax: +32 2 219 85 14 E-mail: info@eiga.eu Internet:
More informationDescribe Flame Arrestor Operation and Maintenance Human Development Consultants Ltd.
Training Module Describe Flame Arrestor Operation and Maintenance Human Development HDC Human Development All rights reserved. No part of this publication may be copied, reproduced, stored in a computer
More informationMaterial Safety Data Sheet
Material Safety Data Sheet 1. Product 1.1 System: Rechargeable Lithium-ion Polymer Battery 2. Composition Information on Components Ingredient CAS Number Percent of Content Classification & Hazard labeling
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationHazardous areas, as found around a service station, are classified into three zones as follow: Table 1: Zone Classification for Vapours
MIE TALK - July 2016 Compiled by Pieter H. Coetzee Introduction Far too many fires and burn injuries result from the careless or inappropriate use of petrol. Because petrol is so common in our environment,
More informationISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements
INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
More informationACCREDITED LABORATORY
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Mechanical Testing
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
More informationVarious tests and analysis will be carried out at testing laboratory on the received samples such as:
2 Testing Various tests and analysis will be carried out at testing laboratory on the received samples such as: - General Quality Control Test - Special Analysis Tests as requested 2.1 General Quality
More informationASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels
ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification
More informationCONSOLIDATED VERSION IEC TS Explosive atmospheres Part 32-1: Electrostatic hazards, guidance. colour inside. Edition 1.
CONSOLIDATED VERSION IEC TS 60079-32-1 Edition 1.1 2017-03 colour inside Explosive atmospheres Part 32-1: Electrostatic hazards, guidance INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.260.20 ISBN 978-2-8322-4121-9
More informationProcess Analyzer. Flash Point Analyzer Model P-500. Credible Solutions for the Oil and Gas Industry
Process Analyzer Flash Point Analyzer Model P-500 Credible Solutions for the Oil and Gas Industry Flash Point Analyzer Process Model P-500 Analyzer To remain competitive, today s refiners must employ all
More informationSelf-Ignition Behaviour of Growing Dust Layers
445 A publication of CHEMICAL ENGINEERING TRANSACTIONS VOL. 48, 2016 Guest Editors: Eddy de Rademaeker, Peter Schmelzer Copyright 2016, AIDIC Servizi S.r.l., ISBN 978-88-95608-39-6; ISSN 2283-9216 The
More informationStray Gassing of Transformer. Streams and Addi;ves. Ed Casserly, Ph.D. Director - Refinery R&D Ergon Refining, Inc.
Stray Gassing of Transformer Oils Effects of Refinery Streams and Addi;ves Ed Casserly, Ph.D. Director - Refinery R&D Ergon Refining, Inc. Presented at My Transfo 2014 Outline! Definition and Issue of Stray
More informationFIRE TEST REPORT FH 5728
1222 Moonshine Road Judgeford RD1 Porirua 5381 New Zealand T +64 4 237 1170 F +64 4 237 1171 branz@branz.co.nz www.branz.co.nz FIRE TEST REPORT FH 5728 CONE CALORIMETER TEST AND NZBC VERIFICATION METHOD
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
More informationFIRE TEST REPORT FH 5154
1222 Moonshine Road Judgeford RD1 Porirua 5381 New Zealand T +64 4 237 1170 F +64 4 237 1171 branz@branz.co.nz www.branz.co.nz FIRE TEST REPORT FH 5154 CONE CALORIMETER TEST AND NCC SPECIFICATION C1.10
More informationSafety Data Sheet. 1. Identification of the Product and of the Company undertaking
Safety Data Sheet (IPBT Safety Data Sheet LiPo MSDS S&A, Date of Issue: 1-January-2017) ----------------------------------------------------------------------------------------------------------------------------------------
More informationTechnical Notice. Lithium Battery Information Sheet
Page 1 of 6 Technical Notice Distribution Class 1 Lithium Battery Information Sheet 1. Identification 1.1 Product Name: High Energy Lithium Battery, or Sonnenschein Lithium Inorganic Lithium Battery Voltage:
More informationSCOPE OF ACCREDITATION TO ISO GUIDE 34:2009
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 DCG PARTNERSHIP 1, LTD. 4170 A South Main Pearland, TX 77581 Louis D Agostaro Phone: 281-648-1894 Ext. 201 REFERENCE MATERIAL PRODUCER Valid To: November 30,
More informationVegetable based lubricating & degreasing solvent with high solvent power
Vegetable based lubricating & degreasing solvent with high solvent power PRODUCT DESCRIPTION IMPACT is Vegetable based degreasing solvent with high solvent power, demonstrated by a Kauri Butanol index
More informationBF2RA. Low Temperature Ignition of Biomass Jenny Jones, Alan Williams, Abby Saddawi Ben Dooley, Eddie Mitchell, Joanna Werner, Steve Chilton
School of something BF2RA FACULTY OF OTHER Low Temperature Ignition of Biomass Jenny Jones, Alan Williams, Abby Saddawi Ben Dooley, Eddie Mitchell, Joanna Werner, Steve Chilton Introduction Ignition risk
More informationEdexcel GCSE Chemistry. Topic 8: Fuels and Earth science. Fuels. Notes.
Edexcel GCSE Chemistry Topic 8: Fuels and Earth science Fuels Notes 8.1 Recall that Hydrocarbons are compounds that contain carbon and hydrogen only 8.2 Describe crude oil as: A complex mixture of hydrocarbons
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1. Name of Product and Manufacturer Intec Industries Co., Ltd. Name of Product : Nickel Metal Hydride Rechargeable cell or battery pack Name of Company : Intec Industries Co.,
More informationMATERIAL AND EQUIPMENT STANDARD FOR FAST DRYING SYNTHETIC PRIMER TO BE USED WITH HOT APPLIED COAL TAR OR BITUMEN (ASPHALT) ENAMEL ORIGINAL EDITION
MATERIAL AND EQUIPMENT STANDARD FOR FAST DRYING SYNTHETIC PRIMER TO BE USED WITH HOT APPLIED COAL TAR OR BITUMEN (ASPHALT) ENAMEL ORIGINAL EDITION OCT. 1996 This standard specification is reviewed and
More informationby Jim Phillips, P. E.
by Jim Phillips, P. E. Baking flour, coal dust and gasoline; what do these things have in common? They are not the ingredients for a strange new cake recipe. Each of these ingredients is the fuel that
More informationRENEP CGLP. High-performance slideway oils for machine tools, with excellent demulsification properties. Description. Advantages
Description The quality of machined components depends heavily on the accurate feed and accurate positioning provided by machine tool slideways with slideway oils playing an important role. Slideway oils
More informationPrecision Thermometers for Material Testing
Precision Thermometers for Material Testing Precision thermometers acc. to ASTM, IP, BS, DIN, ISO, ANSI, AFNOR, S.T.P.T.C. For standardized material testing procedures such as mineral oil testing Catalogue
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia
More informationDifferential pressure switches for air, flue and exhaust gases GGW A4-U/2
pressure switches for air, flue and exhaust gases -U -U/2 5.03 Printed in Germany Rösler Druck Edition 07.03 Nr. 215 168 1 6 Technical description The differential is an adjustable differential for automatic
More informationRENOSAFE FireProtect 46, 68 Fire resistant hydraulic fluid, based on new ester and additive technology, Type HFDU
Description RENOSAFE FireProtect products are fire resistant hydraulic fluids based on special synthetic esters. The selected organic ester base oils have highest purity and show high oxidation and thermal
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Charter Coating Service (2000) Ltd. Suite
More informationIS INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 054 First edition 1998-09-01 Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION IEC/TS 60079-32-1 Edition 1.0 2013-08 Explosive atmospheres Part 32-1: Electrostatic hazards, guidance IEC/TS 60079-32-1:2013(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright
More informationItem No: Item Desc: Shared SDS s (Item No): SDS Origin. Note: This SDS cover page should accompany all printed copies of actual Safety Data Sheets
Item No: Item Desc: Note: This SDS cover page should accompany all printed copies of actual Safety Data Sheets Shared SDS s (Item No): SDS Origin Manufacturer: Mfg. Code No: SDS No: Phone: Print Date:
More informationDEPARTMENT OF CHEMICAL ENGINEERING University of Engineering & Technology, Lahore. Energy Engineering Lab
DEPARTMENT OF CHEMICAL ENGINEERING University of Engineering & Technology, Lahore Energy Engineering Lab Introduction Energy is often defined as the capacity to do work. Several different forms of energy,
More informationNeopolen P 9230 ESD. Bulk density 1) Average Average Color 2) particle size particle weight [ kg/m 3 ] [ mm ] [ mg ]
= registered trademark of BASF SE Neopolen P 9230 ESD Product Description Neopolen P 9230 ESD is expanded Polypropylene supplied in the form of beads. The cells are largely closed. Table 1: Bulk density
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12405-3 First edition 2014-05-15 Electrically propelled road vehicles Test specification for lithium-ion traction battery packs and systems Part 3: Safety performance requirements
More informationFIRE TEST REPORT FH 5078
1222 Moonshine Road Judgeford RD1 Porirua 5381 New Zealand T +64 4 237 1170 F +64 4 237 1171 branz@branz.co.nz www.branz.co.nz FIRE TEST REPORT FH 5078 CONE CALORIMETER TEST AND NZBC ACCEPTABLE SOLUTIONS
More informationExplosion Characteristics Measurement of Combustible Dusts
Explosion Characteristics Measurement of Combustible Dusts Industrial Explosion Protection Institute, Northeastern University Apr. 18, 2012 Table of contents 1 INTRODUCTION... 1 2 MAXIMUM EXPLOSION PRESSURE
More informationRESOLUTION MSC.286(86) (adopted on 5 June 2009) RECOMMENDATIONS FOR MATERIAL SAFETY DATA SHEETS (MSDS) FOR MARPOL ANNEX I OIL CARGO AND OIL FUEL
MSC 86/26/Add.1 RESOLUTION MSC.286(86) SHEETS (MSDS) FOR MARPOL ANNEX I OIL CARGO AND OIL FUEL THE MARITIME SAFETY COMMITTEE, RECALLING Article 28(b) of the Convention on the International Maritime Organization
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60296 Third edition 2003-11 Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear IEC 2003 Copyright - all rights reserved No
More informationLIST OF PUBLISHED STANDARDS
Report : 0-0- Page o : Of LIST OF PUBLISHED STDRDS umber SS umber pproved mendment 77 SS 96:006 Batch sampling and acceptance criteria for explosion-protected apparatus (EP) 006-0-09 0-0-09 SS 808:967
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 611 Dream Valley Road Rogers, AR 72756 Chessie Koko Phone: 479-636-8782 CHEMICAL Valid To: May 31, 2018 Certificate Number:
More informationSCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc.
More informationArticle: The Formation & Testing of Sludge in Bunker Fuels By Dr Sunil Kumar Laboratory Manager VPS Fujairah 15th January 2018
Article: The Formation & Testing of Sludge in Bunker Fuels By Dr Sunil Kumar Laboratory Manager VPS Fujairah 15th January 2018 Introduction Sludge formation in bunker fuel is the source of major operational
More informationEmerging Techniques; Hyphenated Technologies for Polymer and Biofuel Application
Emerging Techniques; Hyphenated Technologies for Polymer and Biofuel Application Scott Fraser (PhD) National Product Specialist Thermal & Elemental Analysis 1 2009 2010 PerkinElmer Hyphenation Possibilities
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16852 Second edition 2016-10-15 Flame arresters Performance requirements, test methods and limits for use Arrête-flammes Exigences de performance, méthodes d essai et limites
More informationParagon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 15380 Third edition 2016-12-01 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HETG,
More informationUPDATING OF THE GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION AND LABELLING OF CHEMICALS (GHS) Physical hazards
UNITED NATIONS Secretariat Distr. GENERAL ST ST/SG/AC.10/C.3/2007/11 12 April 2007 Original: ENGLISH COMMITTEE OF EXPERTS ON THE TRANSPORT OF DANGEROUS GOODS AND ON THE GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION
More informationTest report no
Exova Warringtonfire, Frankfurt Industriepark Höchst, C369 Frankfurt am Main D-65926 Germany T : +49 (0) 69 305 3476 F : +49 (0) 69 305 17071 E : EBH@exova.com W: www.exova.com Test report no. 2017-2132-1
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13043 First edition 2011-04-15 Road vehicles Refrigerant systems used in mobile air conditioning systems (MAC) Safety requirements Véhicules routiers Systèmes réfrigérants utilisés
More informationFully synthetic refrigeration oils based on special polyglycols (PAG) for R134a A/C systems. Advantages
Description Because of their Cl content, CFC refrigerants like R12 destroy the earth's ozone layer. This led all manufacturers to cease production of fully halogenized CFC's and introduce alternative products.
More informationRECYCLABILITY EVALUATION PROTOCOL FOR PE FILMS
Phone : +32 2 742 96 82 Fax : +32 2 732 12 18 e-mail : recyclass@plasticsrecyclers.eu website: www.recyclass.eu RECYCLABILITY EVALUATION PROTOCOL FOR PE FILMS Standard Laboratory Practice Version 1.0 Published
More informationHigh-pressure switch for gas, air, flue gases and combustion products GW 500 A4 GW A4/2 HP
High-pressure for gas, air, flue gases and combustion products HP /2 HP 5.04 Printed in Germany Rösler Druck Edition 06.04 Nr. 241 654 1 6 Technical description The pressure is an adjustable pressure for
More informationCFPP Process Analyzer
Norms and standards CFPP ASTM D 6371 DIN EN 116 IP 309 Application The BARTEC BENKE CFPP (CFPP-4) is suited to analyze the standardized value of Cold Filter Plugging Point (CFPP) in a process stream online
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
More informationAmerex Part No , 19667, 19682, NiMH Product Information Sheet
Amerex Part No. 18156, 19667, 19682, 21661 NiMH Product Information Sheet Section 1 -Product Identification and Company Information Supplier Name: Product: Rechargeable Battery Pack (NiMH) Amerex Corporation
More informationPRODUCT INFORMATION SHEET
PRODUCT INFORMATION SHEET Rockwell Automation 1 Allen Bradley Drive Mayfield Heights, OH 44124 Telephone: 440-646-5000 Internet: www.rockwellautomation.com Date of preparation: 15.July.2005 Revised: 19.August.2009
More informationTests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL. SINCE 1985 Quality Controlled Through Analysis
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL SINCE 1985 Client: Powertron LLC Requested By: Mr. Tony Sgarbi Sample: 10% PermaFrost + 90% Report
More informationC2000, Mirror Glaze Professional Detailing Clay (Mild) Meguiar's, Inc. Meguiar's. EMERGENCY PHONE: CHEMTREC (24 hours)
MATERIAL SAFETY DATA SHEET C2000, Mirror Glaze Professional Detailing Clay (Mild) 10/20/13 Material Safety Data Sheet Copyright, 2011, Meguiar's, Inc. All rights reserved. Copying and/or downloading of
More informationBiodiesel Production and Analysis
Biodiesel Production and Analysis Introduction A key current focus in science and engineering is the development of technologies for generating and utilizing new sources of energy. Climate change, geopolitics,
More informationPressure switch for gas, GW 500 A4 GW 500 A4/2
for gas, air, flue gases and combustion products /2 5.09 Printed in Germany Edition 02.18 Nr. 255 960 1 6 Technical description The pressure is an adjustable pressure as per EN 1854 (GW 6000 A4 as per
More informationCrastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
More informationISO 3679 INTERNATIONAL STANDARD. Determination of flash point Rapid equilibrium closed cup method
INTERNATIONAL STANDARD ISO 3679 Third edition 2004-04-01 Determination of flash point Rapid equilibrium closed cup method Détermination du point d'éclair Méthode rapide à l'équilibre en vase clos Reference
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
More informationTECH TIRE BALANCING COMPOUND
TECH TIRE BALANCING COMPOUND Product: 112 TL SERIES Manufacturer emergency phone number: Section 1 : PRODUCT AND COMPANY IDENTIFICATION Manufacturer: Truflex/Pang Rubber Products Company, Inc. 200 East
More informationScope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX Gavin Lewis
Scope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX 77060 Gavin Lewis 832-428-2737 In recognition of a successful assessment to ISO/IEC 17025:2005
More informationHigh-pressure switch for gas, air, flue gases and combustion products GW A4/2 HP
High-pressure switch for gas, air, flue gases and combustion products 5.04 Printed in Germany Edition 02.10 Nr. 241 654 1 6 Technical description The pressure switch is an adjustable pressure switch as
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15188:2007 Ladestunud tolmu iseenesliku süttmiskäitumise määramine Determination of the spontaneous ignition behaviour of dust accumulations EESTI STANDARDIKESKUS EESTI STANDARDI
More informationProduct information. COLORTHERM Green GN-M. Description. Specification. Specification. Green pigment, micronised
Product information COLORTHERM Green GN-M Description Type Delivery form Chemical class Colour Index CAS-No. REACH Specification Green pigment, micronised Powder Chromium oxide Cr 2 O 3 Pigment Green 17
More information