LIST OF PUBLISHED STANDARDS
|
|
|
- Clifton Fowler
- 6 years ago
- Views:
Transcription
1 Report : 0-0- Page o : Of LIST OF PUBLISHED STDRDS umber SS umber pproved mendment 77 SS 96:006 Batch sampling and acceptance criteria for explosion-protected apparatus (EP) SS 808:967 (SBS 808) Cable glands for use on flameproof enclosures (Ex d) SS 868--:00 SS 868--:00 SS 868--:00 SS 868-:00 SS 00:00.0 both Part -:Hazardous locations in underground mines - Basic explosion protected engines both Part -: Hazardous locations in underground mines - Explosion protected engine systems both Part -: Hazardous locations in underground mines - Machines both Part : on-hazardous locations in underground coal mines Power-operated dispensing devices for flammable liquid fuels SS :979 (SBS ) Diesel engines modified for use in hazardous locations (other than in mines) SS 8-:987 (SBS 8-) Helmet light assemblies for miners Part : Helmet lights (headlights) SS 8-:987 (SBS 8-) Helmet light assemblies for miners Part : Helmet light assemblies SS 89:00 (SBS 89).0 Flameproof restrained and bolted type plugs and sockets mendment otes: - ational or I - International - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, I - Information Sheet, K - Collective mendment, S - Supplemen
2 Report : 0-0- Page o : Of LIST OF PUBLISHED STDRDS umber SS umber pproved mendment 77 SS :009 DC-powered (battery-operated) machines for use in hazardous locations in mines SS 660:00.0 Electrical resistance of floors SS 00:00 The use of light metals in hazardous locations at mines SS 0086-:00 SS 0086-:006 SS 0086-:00 (SBS 086-) SS 0089-:007 SS 008:00 SS 09:00 (SBS 09) SS 0:00 (SBS 0) : Installations including surface installations on mines : Electrical apparatus installed underground in mines : Repair and overhaul of apparatus used in explosive atmospheres The petroleum industry Part : Electrical and other installations in the distribution and marketing sector The classification of hazardous locations and the selection of apparatus for use in such locations Reduction of explosion hazards presented by electrical equipment - Segregation, ventilation and pressurization The control of undesirable static electricity SS 08:997 (SBS 08) Maintenance of helmet light assemblies SS 07:00 (SBS 07) voidance of hazards underground in collieries to lightning SS :009/IEC :007 Explosive atmospheres Part 0: Equipment - General requirements SS :009/IEC :007 6 Explosive atmospheres Part : Equipment protection by flameproof enclosures "d" I C mendment otes: - ational or I - International - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, I - Information Sheet, K - Collective mendment, S - Supplemen
3 Report : 0-0- Page o : Of LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SS :007/IEC :007 Explosive atmospheres Part : Equipment protection by pressurized enclosures <<p>> SS :97/IEC :97 SS :009/IEC :007 atmospheres Part : Method of test for ignition temperature Explosive atmospheres Part : Equipment protection by powder filling "q" SS :009/IEC :007 Explosive atmospheres Part 6: Equipment protection by oil-immersion "o" SS :007/IEC :006 Explosive atmospheres Part 7: Equipment protection by increased safety "e" SS :00/IEC :008 SS :009/IEC :009 SS :007/IEC :006 Explosive atmospheres Part 0-: Classification of areas - Explosive gas atmospheres Explosive atmospheres Part 0-: Classification of areas - Combustible dust atmospheres Explosive atmospheres Part : Equipment protection by intrinsic safety "i" SS :978/IEC :978 SS :98/IEC :98 SS :009/IEC :007 atmospheres Part : Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents atmospheres Part : Construction and use of rooms or buildings protected by pressurization Explosive atmospheres Part : Electrical installations design, selection and erection SS :00/IEC :00 Explosive atmospheres Part : Equipment protection by type of protection "n" SS :990/IEC :990 SS :009/IEC :007 atmospheres Part 6: rtificial ventilation for the protection of analyzer(s) houses Explosive atmospheres Part 7: Electrical installations inspection and maintenance SS :009/IEC :009 Explosive atmospheres Part 8: Equipment protection by encapsulation "m" mendment otes: - ational or I - International - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, I - Information Sheet, K - Collective mendment, S - Supplemen
4 Report : 0-0- Page o : Of LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SS :007/IEC :006 Explosive atmospheres Part 9: Equipment repair, overhaul and reclamation SS :00/IEC :00 SS :996/IEC :996 SS :00/IEC :00 Explosive atmospheres Part 0-: Material characteristics for gas and vapour classification - Test methods and data atmospheres Part 0: Data for flammable gases and vapours relating to the use of electrical apparatus Explosive atmospheres Part : Intrinsically safe electrical systems SS :007/IEC :006 Explosive atmospheres Part 6: Equipment with equipment protection level (EPL) Ga SS :009/IEC :008 Explosive atmospheres Part 7: Fieldbus intrinsically safe concept (FISCO) SS :009/IEC :006 SS :007/IEC :007 SS :007/IEC :007 SS :009/IEC :008 Explosive atmospheres Part 8: Protection of equipment and transmission systems using optical radiation Explosive atmospheres Part 0-: Electrical resistance trace heating - General and testing requirements Explosive atmospheres Part 0-: Electrical resistance trace heating - pplication guide for design, installation and maintenance Explosive atmospheres Part : Equipment dust ignition protection by enclosure "t" I C SS 609:00/IEC 609:00..0 Degrees of protection provided by enclosures (IP Code) SS 6-0:00/IEC 6-0:00 combustible dust Part 0: General requirements SS 6--:99/IEC 6--:99 SS 6--:99/IEC 6--:99 combustible dust Part : Test methods Section : Methods for determining the minimum ignition temperatures of dust combustible dust Part : Test methods Section : Method for determining the electrical resistivity of dust in layers mendment otes: - ational or I - International - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, I - Information Sheet, K - Collective mendment, S - Supplemen
5 Report : 0-0- Page o : Of LIST OF PUBLISHED STDRDS umber SS umber pproved mendment 77 SS 6--:99/IEC 6--:99 SS 6-:00/IEC 6-:00 SS 6-:007/IEC 6-:00 SS 6-:00/IEC 6-:00 SS 66:00/IEC 66:00 RP 008:007.0 combustible dust Part : Test methods Section : Method for determining minimum ignition energy of dust/air mixtures combustible dust Part : Type of protection "pd" combustible dust Part : Protection by intrinsic safety "id" combustible dust Part : Selection and installation Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) Regulatory requirements for explosionprotected apparatus mendment otes: - ational or I - International - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, I - Information Sheet, K - Collective mendment, S - Supplemen
LIST OF PUBLISHED STANDARDS
Report : 08-05-0 Page o : Of 5 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 09 SS 08:0.0 The design and installation of compressed natural gas (CG) vehicle filling stations 0-0-0 0-0-0
LIST OF PUBLISHED STANDARDS
Report : 08-06-08 Page o : Of 8 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 069 SS 959-:06/RS 05-:0.0 Photovoltaic systems for use in individual homes, schools and clinics Part : 06--8
LIST OF PUBLISHED STANDARDS
Report : 08-0-6 Page o : Of 5 LST OF PUBLSHED STDRDS Total Count: 78 umber SS umber pproved mendment SBS/TC 066 SS 97:07 7.0 Electric cables - mpregnated paper-insulated 07-0-7 metal-sheathed cables for
LIST OF PUBLISHED STANDARDS
Report : 07--0 Page o : Of 6 LST OF PUBLSHED STDRDS Total Count: 7 umber SS umber nt pproved mendment SBS/TC 06 SS 954:0.0 Metal-arc welding equipment (non-automatic, 0-0-8 single-operator, transformer
LIST OF PUBLISHED STANDARDS
Report : 08-05-0 Page o : Of LST OF PUBLSHED STDRDS Total Count: 59 umber SS umber nt pproved mendment SBS/TC 06 SS 787:005.0 Ophthalmic lenses 005-09-6 005-09-6 07-0-6 SS 97-:0.0 Signs for street and
LIST OF PUBLISHED STANDARDS
Report : 08-09- Page o : Of LST OF PUBLSHED STDRDS Total ount: 59 umber SS umber nt pproved mendment iew/ ision SBS/T 0 SS 59:007 Open-sided passenger 007-- 0-0- SS 570:008 Directional stability performance
VALIADIS S.A. HELLENIC MOTORS
Explosion proof motors MAK 56-250 (MAKe 63-250) series Groups IIB and IIC Ex db / Ex db e (EPL) executions Gb or Ex tb IIIC (EPL) Db II 2 G, II 2D, 2GD SAFETY INSTRUCTIONS Safety Instructions MAK and MAKe
INSTRUCTION MANUAL (ATEX / IECEx)
INSTRUCTION MANUAL (ATEX / IECEx) BExBGL2D LED BEACON For use in Flammable Gas and Dust Atmospheres BExBGL2D 1) Warnings DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT DO NOT OPEN WHEN ENERGIZED POTENTIAL
Hazardous areas, as found around a service station, are classified into three zones as follow: Table 1: Zone Classification for Vapours
MIE TALK - July 2016 Compiled by Pieter H. Coetzee Introduction Far too many fires and burn injuries result from the careless or inappropriate use of petrol. Because petrol is so common in our environment,
The filling level sensors are designed in accordance to the following standards
Instructions according to Portaria N 179/2010 UL-BR 17.0706 Filling Level Sensors type VISY-Stick and type TORRIX Ex Version: 09.2017 I Range of application The filling level sensors are designed for continuous
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29978-1 IEC 60079-17:2013 SOUTH AFRICAN NATIONAL STANDARD Explosive atmospheres Part 17: Electrical installations inspection and maintenance This national standard is the identical implementation
INSTRUCTION MANUAL (ATEX / IECEx)
INSTRUCTION MANUAL (ATEX / IECEx) BExBG10D-P and BExBG15D-P Flameproof Xenon Beacons For use in Flammable Gas and Dust Atmospheres BExBG10D-P / BExBG15D-P 1) Warnings DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE
Explosion protection. Air + combustible gas + ignition source = explosion. Air + combustible dust + ignition source = explosion
Ex-protection Explosion protection Valves for fluid technology for use in explosion hazard areas Explosion protection for gas, dust and mining Flameproof enclosures and intrinsic safety Solutions for all
IECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Certificate history: Status:
Explosion-proof Solenoids ATEX. II 2 G / II 2 D EEx dm IIC T4, T5, T6. Catalogue 8735/GB. Maximum photo
Explosion-proof Solenoids II 2 G / II 2 D EEx dm IIC T4, T5, T6 Catalogue Maximum photo ATEX Explosionproof solenoids with flameproof enclosure/encapsulation "dm" According to ATEX directive 94/9/EC and
国家级仪器仪表防爆安全监督检验站 National Supervision and Inspection Centre for Explosion Protection and Safety of Instrumentation (GYJ12.1232X) (Attachment I) AttachmentⅠ (Translation) Solenoid type 2A52W and 2C52W series,
Table of contents. Technical informations > ATEX Page Technical informations Page Mechanically operated valves Page 13-06
Technical informations > Table of contents ATEX Page 13-02 Technical General informations information Page 13-02 Mechanically operated valves Page 13-06 Pneumatically operated valves Page 13-06 Electrically
Petroleum industries are dealing with different hazardous materials starting from storing, processing and distributing the petroleum products These he
FIRE SAFETY OF PETROLEUM INDUSTRIES By- Debapriya Biswas Additional Director General West Bengal Fire & Emergency Services Petroleum industries are dealing with different hazardous materials starting from
System Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters
System 6000 Electropneumatic Converters (Proportional Valves) Electronic Process Controllers Signal Converters Edition April 2018 Information Sheet T 6000 EN Electropneumatic Converters i/p converters
by Jim Phillips, P. E.
by Jim Phillips, P. E. Baking flour, coal dust and gasoline; what do these things have in common? They are not the ingredients for a strange new cake recipe. Each of these ingredients is the fuel that
As one of the leaders in cable management systems industry, MASEICO maintained the unique success by producing its developed range of cable glands.
Introduction As one of the leaders in cable management systems industry, MASEICO maintained the unique success by producing its developed range of cable glands. MASEICO cable glands were designed and manufactured
Flameproof Enclosures
Flameproof Enclosures The range comprises many standard sizes of enclosures manufactured in stainless steel 316L and/or in painted carbon steel. The enclosures allow for utilization of standard electrical
Control and Terminal Box Type A21-**-*****
e pd Control and Terminal Box Exepd GmbH i_park TAUBERFRANKEN Building 23 Becksteinerstrasse 100 97922 Lauda-Königshofen Germany Phone: ++49 (0) 9343 627055-0 Fax: ++49 (0) 9343 627055-99 Mail: info@exepd.de
Latest news on explosion protection
Latest news on explosion protection Electrical equipment for the low voltage area, legal principles, ATEX guidelines and types of ignition protection, modular design structure, VEM product range, repair,
Protecta III. Acclaim. Curie Elite. Lomond. Evolution II. Nevis. NexLED. Sterling II. 800 Series. Micronex/Maxinex. Nexxus II.
Protecta III Acclaim Curie Elite Lomond Evolution II Nevis NexLED Sterling II 800 Series Micronex/Maxinex Nexxus II Eclipse II CHALMIT LIGHTING 2 Chalmit Lighting, formerly known as Andrew Chalmers and
Ex e, ia Junction boxes TNCN. Features
TNCN Features The TNCN/TNCC range comprises many standard sizes of enclosure manufactured in 316L acid resistant stainless steel to give the maximum environmental protection. The main body is manufactured
Lenze ATEX-compliant gearboxes Gearboxes for use in potentially explosive atmospheres
Lenze ATEX-compliant gearboxes Gearboxes for use in potentially explosive atmospheres ATEX for drive technology The ATEX directive, which has been in force since July 1, 2003, has been introduced in an
ADVANTAGES. Air + combustible gas + ignition source = explosion. Air + combustible dust + ignition source = explosion
EX-PROTECTION ADVANTAGES Valves for fluid technology for use in explosion hazard areas Explosion protection for gas, dust and mining Flameproof enclosures and intrinsic safety Solutions for all zones The
Body: Seat disc: Anod. aluminium body NBR. Connection / Orifice Flow factors Temperature values ( C)
Parker Lucifer Data Sheet 22062004 General information Lucifer ref.: 341N31 Global ref.: 7341NAKBJNM0 Housing ref.: 2995 Coil ref.: 481865 Protection class: Assembly wt. (g): 510 Body: Seat disc: Anod.
REMA ELECTRICAL CONNECTOR DR E250 EX
REMA ELECTRICAL CONNECTOR DR E250 EX Productfeatures and advantages Electrical connector especially designed for the use in hazardous areas Approved for Zone 1 & (gas) and zone 21 (durst) Ex marking Compliant
国家级仪器仪表防爆安全监督检验站 National Supervision and Inspection Centre for Explosion Protection and Safety of Instrumentation (GYJ12.1230X) (Attachment I) AttachmentⅠ (Translation) Solenoid type 11A52, 11C52, 11E52
Process resistance thermometer Model TR12-B, for additional thermowell Model TR12-M, basis module
Electrical temperature measurement Process resistance thermometer Model TR12-B, for additional thermowell Model TR12-M, basis module WIKA data sheet TE 60.17 for further approvals see page 6 Applications
Sources of Ignition and Hazardous Area Classification Core
Sources of Ignition and Hazardous Area Classification Core Likelihood of Ignition Factors of Explosion What factors influence the likelihood of explosion? We must work to prevent loss of containment and
Shut-off dampers. Type AK-Ex. For low-leakage shut-off of volume flows in potentially. explosive atmospheres (ATEX) PD AK-Ex 1.
X X testregistrierung Shut-off dampers Type ATEX-compliant parts and units For low-leakage shut-off of volume flows in potentially explosive atmospheres (ATEX) Circular shut-off dampers for shutting off
YFC. Limit switch. Ex d. 24 operating head types
Ex d YFC Limit switch 24 operating head types - Group IIC - Zone 1, 2, 21, 22 - Aluminium alloy - Easy installation, wiring and maintenance - Durable and safe over time Fastening system Earth screw RAL735
Miretti Flameproof 1MIRETTI. Technology Jan. 1st, 2014 Editor: Max Huang Mp:
Miretti Flameproof 1 Technology Jan. 1st, 2014 Editor: Max Huang Email: Max.huang@miretti.net Mp: +86-158 2100 7175 1 MARKETS Miretti products: 2 flameproof conversions of: Electric & diesel forklift trucks
IECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Certificate history: Status:
BROCHURE. Low voltage motors and drives for applications in explosive atmospheres
BROCHURE Low voltage motors and drives for applications in explosive atmospheres 2 ABB LOW VOLTAGE MOTORS AND DRIVES FOR APPLICATIONS IN EXPLOSIVE ATMOSPHERES ABB LOW VOLTAGE MOTORS AND DRIVES FOR APPLICATIONS
Reg No: 1999/027771/07 ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS
Government Approved Test Laboratory (Previously AIA) Reg No: 1999/027771/07 Equipment: Manufacturer: Type: ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION
Fans for ATEX EXPLOSIVE ATMOSPHERES
Fans for ATEX EXPLOSIVE ATMOSPHERES An ATEX area is a mixture of air and inflammable gas, the vapour of an inflammable liquid, a fog of combustible liquid or combustible powder, which, if they catch fire,
GOVERNMENT APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS
Reg No: 1999/027771/07 (Pty) Ltd 7 Spanner Rd / PO Box 467 Olifantsfontein 1665 Tel: +27 (11) 316 4601 Fax: +27 (11) 316 5670 E-mail: admin-mgr@explolabs.co.za GOVERNMENT APPROVED TEST LABORATORY IN TERMS
Short form catalogue ATEX certified products
Short form catalogue certified products Products classified for the use in potentially esplosive atmospheres (Directive Atex 94/9/CE) As from the first of July 2003, all products which are commercialised
Royex Gen II Rock breaking cartridge Technical data sheet
E T K E N T E K N O L O G I Royex Gen II Rock breaking cartridge Technical data sheet Etken Teknolgi Runsätravägen 5 123 63 Farsta, Sweden Tel: 08-94 10 70 www.royexsystem.com 1. Introduction The Royex
Type - KF FLAME-PROOF MOTOR FRAME 80 TO 355 Ex d. A Regal Brand.
Type - KF FLAME-PROOF MOTOR FRAME 0 TO 3 Ex d A Regal Brand www.regalbeloit.com TYPE-KF FLAME-PROOF MOTOR Standards Flameproof Motors (type Ex d) conform to the following standards. i) Enclosure IS/IEC
Modern Explosion Protection
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Modern Explosion Protection ATEX valves for use in industrial
JBEP Series Fiberglass Reinforced Polyester Terminal Junction Boxes for Instrumentation Applications Increased Safety. Factory Drilled and Equipped
Enclosures and Junction Boxes Enclosures and Junction Boxes: Hazardous Location Outlet Boxes Applications Instrumentation junction boxes are used to run process or remote information to control room. For
ProMinent EXtronic Solenoid Diaphragm Metering Pumps
Overview: EXtronic Ideal for explosion-proof applications (see page 126 for spare parts) The ProMinent EXtronic series represents a proven technology for metering liquid media in hazardous areas classified
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16852 Second edition 2016-10-15 Flame arresters Performance requirements, test methods and limits for use Arrête-flammes Exigences de performance, méthodes d essai et limites
ATEX LABELLING FOR MOTORS AND GEAR UNITS
ATEX LABELLING FOR MOTORS AND GEAR UNITS EN ATEX INFORMATION GAS AND DUST COMPLETE DRIVE SOLUTIONS FROM A SINGLE SOURCE RELIABLE n Reliable products n Coordinated components n NORD's own development and
Endress+Hauser Wetzer GmbH+Co. KG Obere Wank Nesselwang Germany. Field Temperature Transmitter itemp, Types TMT82, TMT84 and TMT85
--~---- - ECEx Certificate NTERNATONAL ELECTROTECHNCAL COMMSSON EC Certification Scheme for Explosive Atmospheres for rules and details of the ECEx Scheme visit www.iecex.com ECEx DEK 11.0096 issue No.:O!
Junction Boxes & Enclosures JBES Series: Pre-drilled 316L Stainless Steel Junction Boxes Increased Safety
Je10 Without Terminals ompliance ata: TEX - IE: TEX IE E Ex e II; Ex ia II; Ex ib II T6 to T5 Ex t 21 T80 to T95 Operating Temperatures: -50 to +70 199 TX Product atalog pplications: Terminal junction
Junction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety
JBES Series Medium Voltage 11 kv ECES Series Compliance Data: ATEX - IEC: ATEX IEC CE Ex e II Ex ia IIC; Ex ib IIC T6 to T4 Ex td A21 T80 C to T130 C Ex de IIC; Ex demb IIC Operating Temperatures: -50
This document is a preview generated by EVS
TECHNICAL SPECIFICATION IEC/TS 60079-32-1 Edition 1.0 2013-08 Explosive atmospheres Part 32-1: Electrostatic hazards, guidance IEC/TS 60079-32-1:2013(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright
CAV controllers. Type EN-Ex. For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX)
X X testregistrierung CAV controllers Type Adjustment scale For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX) Rectangular, mechanical self-powered
Product Overview. Rotary Encoders for Potentially Explosive Atmospheres (ATEX)
Product Overview Rotary Encoders for Potentially Explosive Atmospheres (ATEX) December 2013 Rotary encoders for use in potentially explosive areas Introduction There are many types of applications in industry
K Series 3 Way Direct Acting Balanced Poppet Solenoid Valve
Ex d Ex m IP5 Series 3 Way Direct Acting Balanced Poppet Solenoid Valve DB2S-M2C \ Ex d IIC with Integral Stainless \ Steel Junction Box. \ Valve. \ Manual Override, Option M2. J77072S-M2 \ Ex m II NASS
Hazardous Location Solutions for the Process Control Industry. UL CSA FM ATEX IECEx NEPSI INMETRO TR CU
4 Hazardous Location Solutions for the Process Control Industry UL CSA FM ATEX IECEx NEPSI INMETRO TR CU w w w. a s c o v a l v e. c o m ^ # % Global Approvals Fluid automation equipment must operate flawlessly
Unused flameproof threads for cable glands have to be closed with certified plugs.
E X - P L U G A N D R E C E P T A C L E 1 A Metallic Design for Zone 1 The explosion-protected light metal plug and receptacle devices can be used in the areas of Zone 1 and Zone 2 at no risk of explosion.
IECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx UL 13.0077U issue No.:1
Flame Proof Motors For Hazardous Environment JHX
Flame Proof Motors For Hazardous Environment JHX troduction The use of electrical motors in potentially explosive atmospheres is quite frequent these days. These motors have to be constructed in such a
Certificate of Compliance
Certificate of Compliance Certificate: 70054084 Issued to: Emerson - Rosemount, Micro Motion Inc. 12001 Technology Dr. Eden Prairie, Minnesota 55344 USA Attention: Paul Schilke The products listed below
STAINLESS STEEL PANEL MOUNT
Z A H LO C STAINLESS STEEL PANEL MOUNT Optional Legend Plate Cover Screw Retaining Washer Panel Mount Bracket Explosion Protective LED Pilot Light Stainless Steel Washer Actuator Spacer Locknut Explosion
High voltage flameproof induction motors The simplest solution for hazardous environments
High voltage flameproof induction motors The simplest solution for hazardous environments We offer motors and generators, services and expertise that save energy and improve our customers processes over
EX Series User Manual
MODELS: EX90L T4 IIB 720 DS, EX90L T4 IIB 1440 SS, EX90L T4 IIC 720 SS EXIN LIGHT EX & INDUSTRIAL LIGHTING EX Series EX90L T4 IIB 720 DS, EX90L T4 IIB 1440 SS, EX90L T4 IIC 720 SS Contents 0. Introduction
Use and maintenance manual and ATEX provisions
Use and maintenance manual and ATEX provisions In compliance with the harmonised standards of ATEX Directive 94/9/EC SMEM s.r.l. Via Monte Grappa, 33 20900 Monza (MB) Tel: 039 2000231 Fax: 039 2000664
LIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX )
LIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX ) Publication# 03revA Table of Contents Publication# 03revA Table Of Contents...
Jefferson Electric Class I Division 2 Transformers for hazardous locations
Class I Division 2 Jefferson Electric Class I Division 2 Transformers for hazardous locations Jefferson Electric offers a full line of Class I Division 2 transformers. Jefferson Electrics Class I Division
Explosion-Proof Motors Increased Safety
Explosion-Proof Motors Increased Safety II 2G Ex e II T3 - T4 II 2G Ex e II T3 - T4 / II 2D Ex td 21 Txxx C II 2D Ex td 21 Txxx C 0344 Certified to TEX Directive 94/9/EC Product Catalogue DESCRIPTION OF
ProMinent EXtronic Solenoid Diaphragm Metering Pumps
Overview: EXtronic Ideal for explosion-proof applications (see page 128 for spare parts) The ProMinent EXtronic series represents a proven technology for metering liquid media in hazardous areas classified
Explosion-proof motors
/2 Orientation /2 Overview /3 Benefits /3 Application /3 Technical specifications /5 Selection and ordering data /7 More information /12 Self-ventilated motors in Zone 1 with type of protection "e" Aluminium
UN ECE Sectoral Initiative on Equipment for Explosive Atmospheres. United States Department of Labor Mine Safety and Health Administration (MSHA)
UN ECE Sectoral Initiative on Equipment for Explosive Atmospheres 7 September 2011 United States Department of Labor Mine Safety and Health Administration (MSHA) Describe MSHA Presentation Agenda Applicable
Explosion protected hydraulic products. Product overview industrial and mobile hydraulics
Explosion protected hydraulic products Product overview industrial and mobile hydraulics 2 Explosion protected hydraulic products Recognizing hazards and categorizing them correctly Legal directives such
Certificate of Compliance
Certificate of Compliance Certificate: 2288626 Master Contract: 184585 Issued to: CMP Products Ltd Glasshouse St. St. Peters Newcastle Upon Tyne, NE6 1BS United Kingdom Attention: Dave Willcock The products
Resistance thermometer Model TR10-L, Ex d, for additional thermowell
Electrical temperature measurement Resistance thermometer Model TR10-L, Ex d, for additional thermowell WIKA data sheet TE 60.12 for further approvals see page 6 Applications Chemical industry Petrochemical
Small centrifugal fans made of plastic
Small centrifugal fans made of plastic durable application-optimised wide range of variants 2 Small centrifugal fans made of plastic Index Small centrifugal fans made of plastic HF R 75-16 D and HF R 110-18
Fisher FIELDVUE DVC6000f Digital Valve
Quick Start Guide DVC6000f Digital Valve Controllers Fisher FIELDVUE DVC6000f Digital Valve Controllers Contents Using this Guide... 4 Installation... 5 Basic Setup and Calibration... 23 Specifications
CAV controllers. Type RN-Ex. For the precise control of constant volume flows in potentially explosive atmospheres (ATEX) PD RN-Ex 1
X X testregistrierung CAV controllers Type Adjustment scale ATEX-Zertifizierung For the precise control of constant volume flows in potentially explosive atmospheres (ATEX) Circular, mechanical self-powered
Resistance thermometer Model TR10-E, for additional thermowell
Electrical temperature measurement Resistance thermometer Model TR10-E, for additional thermowell WIKA data sheet TE 60.05 further approvals see page 6 Applications Chemical industry Petrochemical industry
Compact temperature switch Model TCS
Mechatronic temperature measurement Compact temperature switch Model TCS WIKA data sheet TV 31.64 Process Compact Series Applications Temperature monitoring and control of processes Safety-critical applications
Explosion proof electric motor For Fuel dispensing application. Main characteristic
Ad-pe ed.2018/0 1 Explosion proof electric motor For Fuel dispensing application RAEL motori elettrici, since its inception in the late 60s, has assembled more than a million of explosion proof electric
Flame Arrester. ergil. ATEX approved. Storage Tank Protection Equipment. Model Number 300. Product Description. (Vertical, in-line, deflagration)
ATEX approved Flame Arrester (Vertical, in-line, deflagration) Model Number 300 Product Description EGIL Storagetech Model Number 300 Flame Arrester is a safety device that has a flame barrier with a large
FIBOX EX. ATEX Directive (94/8/EC) FIBOX ALX ENCLOSURES FIBOX FEX-PC-7 FIBOX PEX
71 FIBO AL ENLOSURES FIBO E ATE Directive (94/8/E) FIBO FE-P-7 FIBO PE Fibox E enclosures are made for use in hazardous areas. They are designed, tested and manufactured to international standards. The
Model 5000 Level Controller
Features Multiple Configurations The 5000 level controller is easily configured for either reverse or direct actions for both pneumatic and electric pilot options. The pneumatic pilot is available in snap
found in the chemical industry, in offshore installations, in the automobile sector, in the aircraft industry and in shipyards.
x-hand-maschienenleuch_gb.qxd H X N D P 03.11.2005 16:15 Uhr L O S N D I Seite U1 C T O N - M C L P H O R I N G O U T 4 0 8 C T D L M P S x-hand-maschienenleuch_gb.qxd X - H N D 03.11.2005 16:15 Uhr N
CONSOLIDATED VERSION IEC TS Explosive atmospheres Part 32-1: Electrostatic hazards, guidance. colour inside. Edition 1.
CONSOLIDATED VERSION IEC TS 60079-32-1 Edition 1.1 2017-03 colour inside Explosive atmospheres Part 32-1: Electrostatic hazards, guidance INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.260.20 ISBN 978-2-8322-4121-9
AC Mining Motors. AC Motors for the Continuous Miner
AC Mining Motors AC Motors for the Continuous Miner CUTTERHEAD Motor - 175 kw 50 Hz S1 340 HP 60 Hz S1 New motor for Mega-head application. This motor drives the cutter head on the Joy 12HM31 continuous
Hazardous Area Electrical Equipment. TBKF/CBKF Stainless Steel Flat Roof Keyed Terminal Box Zones 1&2, 21&22. Index
Hazardous Area Electrical Equipment Made TBKF/CBKF Stainless Steel Flat Roof Keyed Terminal Box Zones 1&2, 21&22 Index Dimension Sheet Catalogue Information Leaflet Web Links TBKF/CBKF Information Page
Floodlight LED Series 6125
www.stahl.de > Floodlight Zones 1, 2 and 21, 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Enclosure made of sheet steel single powder coated
explosive environments Lighting
explosive environments Lighting CLASSIFICATION OF THE ZONES GAS AND VAPOURS DUST PRESENCE OF EXPLOSIVE ATMOSPHERE ZONE 0 ZONE 20 Category 1G Category 1D Permanent ZONE 1 ZONE 21 Category 2G Category 2D
TBKS/CBKS Stainless Steel Sloping Roof Keyed Terminal Box Zones 1&2, 21&22
Hazardous Area Electrical Equipment TBKS/CBKS Stainless Steel Sloping Roof Keyed Terminal Box Zones 1&2, 21&22 Index Dimension Sheet Catalogue Information Leaflet Web Links TBKS/CBKS Information Page Ask
CONTROLLING AND DISTRIBUTION PANELS FOR HAZARDOUS AREAS AND THE TECHNOLOGY DEVELOPMENT OVER THE LAST 40 YEARS
CONTROLLING AND DISTRIBUTION PANELS FOR HAZARDOUS AREAS AND THE TECHNOLOGY DEVELOPMENT OVER THE LAST 40 YEARS BY JÜRGEN POIDL Switching, controlling and power distribution requires safe equipment that
Floodlight Series 6521/4
> The enclosure made of stainless steel V4A, V2A or powder coated sheet steel is available > Broad or narrow beam reflectors and/or asymmetrical lamp fitting > Series 6521/3 explosion protected floodlight
Compact Sheet-Steel Light Fittings Series 6114/1
> As 1- or 3-lamp version > Versions Pendant fitting Wall-mounting fitting Flush mounted fitting > Powder-coated steel or stainless steel > Central lock > All pole disconnection via NC switch in positive
Certificate of Compliance
Certificate of Compliance (033332_0_000) Issued to: Rosemount Inc. 6021 Innovation Blvd. Shakopee, Minnesota 55379-9795 USA Attention: Glen Edwards The products listed below are eligible to bear the CSA
IECEx Certificate of Conformity
IECEx Certificate of Conformity Certificate No.: IECEx TUN 04.0006X Date of Issue: 2012-06-12 Issue No.: 3 Page 2 of 4 Manufacturer: FAFNIR GmbH Bahrenfelder Straße 19 22765 Hamburg Germany Manufacturing
STS Directory Accreditation number: STS 0630
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TÜV SÜD Schweiz AG Geschäftsbereich Process Safety WRO 1055.5.24 Mattenstrasse 24 CH-4002 Basel Head: Mischa Schwaninger
Type AK-Ex FOR LOW-LEAKAGE SHUT-OFF OF VOLUME FLOWS IN POTENTIALLY EXPLOSIVE ATMOSPHERES (ATEX)
Homepage > Products > Control units > Shut-off and restriction > Shut-Off Devices > Type AK-Ex Type AK-Ex FOR LOW-LEAKAGE SHUT-OFF OF VOLUME FLOWS IN POTENTIALLY EXPLOSIVE ATMOSPHERES (ATEX) Circular shut-off
Hydro Business Partner Production Partner
Author(s) Inger Hugstmyr, Phone + 47 35 92 46 25 To WP Partners Copy to 1 of 18 Title WP 2.1 Codes and Standards Summary Collecting existing codes and standards with references, has been based on searching
Flame proof motors. Ex d IIB. ADPE Series ALUMINIUM. Petrol station motors. ADPE Ed.2008/01 1di 20
Flame proof motors Ex d IIB ADPE Series ALUMINIUM Petrol station motors ADPE Ed.2008/01 1di 20 COMPANY PRESENTATION RAEL, founded in Genoa in 1969, is specialized since 1978 in the study, planning and
PRESSURE TRANSMITTER PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE TRANSMITTER PRESSURE TRANSMITTER
PRESSURE PYRP-28 INDUSTRIAL & INTRINSICALLY SAFE PRESSURE The PYRP-28 pressure transmitter is suitable for the measurement of pressure, vacuum and absolute pressure of gases, vapours and liquids for industrial