Ejector, Series EBS Thread connection pneumatic control, T-design with silencer
|
|
|
- Alannah Reed
- 5 years ago
- Views:
Transcription
1 Type Ejector Ambient temperature min./max. +0 C / + C Medium temperature min./max. +0 C / + C Working pressure min./max. 3 bar / 6 bar Medium Compressed air Max. particle size µm Oil content of compressed air 0 mg/m³ - mg/m³ Materials: Housing Seal Nozzle Threaded bushing Silencers Polyamide, fiber-glass reinforced Acrylonitrile Butadiene Rubber Aluminum Aluminum, anodized Polyethylene Technical Remarks Note: All data refers to an ambient pressure of,03 bar and an ambient temperature of C. The pressure dew point must be at least C under ambient and medium temperature and may not exceed 3 C. Part No. Air consumption at p.opt. Type Nozzle Ø Compressed air connection Vacuum connection+ Max. vacuum level at p.opt Max. suction capacity Part No. [mm] [%] [l/min] EBS-PT-0-NN 0. M M 84 7 R7473 EBS-PT-07-NN 0.7 M M 8 6 R7474 EBS-PT-0-NN G /8 G / R747 EBS-PT--NN. G /8 G / R7476 EBS-PT--NN G /4 G 3/ R7477 EBS-PT--NN. G /4 G 3/8 8 R7478 Sound pressure level intake effect Sound pressure level intake effect Weight [l/min] [db] [db] [kg] R Fig. R Fig. R Fig. R Fig. R Fig. 3 R Fig. 3 p.opt. = optimum working pressure Fig. Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change
2 Gripper and vacuum technology Vacuum generators Vacuum p depending on working pressure p ) = Ø nozzle 0. mm = Ø nozzle 0.7 mm p [%] ) ) = Ø nozzle.0 mm = Ø nozzle. mm p [%] ) 70 ) = Ø nozzle.0 mm = Ø nozzle. mm Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change
3 3 Suction capacity qs depending on working pressure p 004 ) = Ø nozzle 0. mm = Ø nozzle 0.7 mm 70 q [l/min] s ) ) = Ø nozzle.0 mm = Ø nozzle. mm 0079 q [l/min] s 0 ) 00 ) = Ø nozzle.0 mm = Ø nozzle. mm Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change
4 4 Gripper and vacuum technology Vacuum generators Evacuation time te depending on vacuum p for l volume (with optimal operating pressure popt) t [s/l] E 0 ) = Ø nozzle 0. mm = Ø nozzle 0.7 mm p [%] t [s/l] E 6 ) 4 3 ) = Ø nozzle.0 mm = Ø nozzle. mm p [%] ) = Ø nozzle.0 mm = Ø nozzle. mm 0043 Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change
5 Air consumption qv depending on working pressure p ) = Ø nozzle 0. mm = Ø nozzle 0.7 mm q [l/min] s ) ) = Ø nozzle.0 mm = Ø nozzle. mm q [l/min] v ) ) = Ø nozzle.0 mm = Ø nozzle. mm Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change
6 6 Gripper and vacuum technology Vacuum generators Fig. SW8 9,4 M SW8 M, M 9 3, 4, ,8 004 Fig. SW4 4,4 G/8 SW4 G/8, 4 4 G/8 3,6 4 0, 4, 4 6, 0, 9, 004 Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change
7 7 Fig. 3 SW9 9,4 G3/8 SW7 G3/8, 7 G/4 4, 7 3, 3, 4 99, 7, Pneumatics catalog, online PDF, as of 6--9, AVENTICS S.à r.l., subject to change
Ejector, Series EBS push-in fitting electrical control, T-design with release valve with silencer
Type Ejector Ambient temperature min./max. + C / + C Medium temperature min./max. + C / + C Working pressure min./max. 3 bar / 6 bar Medium Compressed air Max. particle size µm Oil content of compressed
Flow and check valves Logic valves Logic valves (AND/OR) Brochure
Flow and check valves Logic valves Brochure 2 Flow and check valves Logic valves Shuttle valve (OR) Qn = 80 l/min Plate valve with pipe connection Compressed air connection input: Ø 4 compressed air connection
E/P pressure regulator, Series ED07 Qn= 1300 l/min Electr. connection: via signal connection Signal connection: input and output, Plug, M12, 5-pin
Pressure regulators E/P pressure regulators E/P pressure regulator, Series ED7 Qn= l/min Electr. connection: via signal connection Signal connection: input and output, Plug, M, Version Poppet valve Control
Pressure regulators E/P pressure regulators Series EV04. Brochure
Pressure regulators E/P pressure regulators Brochure Pressure regulators E/P pressure regulators E/P pressure regulator, Qn= 50 l/min Compressed air connection output: G /8 Electr. connection: Plug, EN
Pressure regulators E/P pressure regulators Series EV07. Brochure
Pressure regulators E/P pressure regulators Series EV07 Brochure 2 Pressure regulators E/P pressure regulators Series EV07 Qn= 800 l/min Compressed air connection output: G 1/4 Electr. connection: Plug,
Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
Max. particle size 5 µm. Pressure for determining piston forces Repetitive precision. Polyurethane
Piston rod cylinders Guide cylinders 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston
Short-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread
Ports: - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread 1 Standards ISO 15524 Compressed air connection Internal thread Ambient temperature min./max. - C / +80
Directional valves Pneumatically operated, according to standard ISO , 18 mm, CD02-AL series. Brochure
Directional valves Pneumatically operated, according to standard Brochure 2 Directional valves Pneumatically operated, according to standard 5/2-directional valve, Series CD02-AL Qn = 450 l/min plate connection
Max. oil content of compressed air Shock resistance max. (XYZ direction) Vibration resistance (XYZ direction) Quiescent current consumption
Sensor technologies Pressure sensors Operating pressure: - - 2 bar electronic Output signal digital: 2 outputs - output IO-Link electr. connection: Plug, M2x, 4-pin 233 Certificates Measurement Display
Max. oil content of compressed air Shock resistance max. (XYZ direction) Vibration resistance (XYZ direction) Quiescent current consumption
Operating pressure: -4.5-74 psi electronic Output signal digital: 2 outputs - output IO-Link electr. connection: Plug, M2x, 4-pin 233 Certificates Measurement Display Units displayed Switching logic Ambient
Directional valves Mechanically operated Series AP - inch. Brochure
Directional valves Mechanically operated Brochure 2 Directional valves Mechanically operated Qn= 150-250 l/min pipe connection compressed air connection output: 1/8-27 NPTF 3 Actuating controls for AP/ST
Number of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
Flow and check valves Logic valves Pneumatic counters. Brochure
Flow and check valves Logic valves Pneumatic counters Brochure 2 Flow and check valves Logic valves Pneumatic counters Pneumatic presetting counter (add) 5-digit, digits Compressed air connection input:
Pressure regulators E/P pressure regulators Series ED05. Brochure
Series ED05 Brochure Series ED05 Qn= 000 l/min Compressed air connection output: G /4 Electr. connection: via signal connection Signal connection: input and output, Plug, M, 5-pin 4 Qn= 000 l/min Compressed
Short-stroke cylinder, Series KHZ Ports: M5 - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal thread
: - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal 1 Compressed air connection Internal Ambient temperature min./max. -25 C / +80 C Medium temperature min./max.
Directional valves Mechanically operated Series CD07. Brochure
Series CD07 InduParts Pneumatics B.V.B.A. Sint-Jorisstraat 40 B-8800 ROESELARE BELGIUM Tel. + (0)5 58 88 Fax. + (0)5 58 98 info@induparts.com www.induparts.com Brochure Bosch Rexroth AG Pneumatics Series
Max. particle size 50 µm Max. oil content of compressed air
1 Version Poppet valve Control Analog Certificates CE declaration of conformity Ambient temperature min./max. +0 C / +70 C Medium temperature min./max. +0 C / +70 C Medium Compressed air Max. particle
Pressure regulators E/P pressure regulators Series ED02. Brochure
Pressure regulators E/P pressure regulators Series ED0 Brochure Pressure regulators E/P pressure regulators Series ED0 E/P pressure regulator, Series ED0 Qn= 10 l/min compressed air connection output:
Max. particle size 50 µm
00123883 Version Poppet ale Control Analog Certificates CE declaration of conformity Ambient temperature min./max. +0 C / +50 C Medium temperature min./max. +0 C / +50 C Medium Compressed air Max. particle
5/2-way valve, Series ST Qn= 280 l/min pipe connection compressed air connection output: G 1/8 with spring return
00108065 Version Spool valve not lockable Sealing principle metal/metal sealing Working pressure min./max. -0.95 bar / 10 bar Ambient temperature min./max. -15 C / +80 C Medium temperature min./max. -15
Directional valves Pneumatically operated Series 740. Brochure
Series 740 Brochure Bosch Rexroth AG Pneumatics Series 740 Accessories 5/2-way valve, Series 740 Qn = 700-950 l/min pipe connection compressed air connection output: Ø 8x1 - Ø 10x1 Can be assembled into
Max. oil content of compressed air
1 Version Control Certificates Ambient temperature min./max. Medium temperature min./max. Medium Poppet valve Analog CE declaration of conformity +32 F / +15 F +32 F / +15 F Compressed air 0012533 Max.
Directional valves Mechanically operated Series AP. Brochure
Series AP InduParts Pneumatics B.V.B.A. Sint-Jorisstraat 40 B-8800 ROESELARE BELGIUM Tel. +31 (0)51 22 58 88 Fax. +31 (0)51 22 58 98 info@induparts.com www.induparts.com Brochure Bosch Rexroth AG Pneumatics
Standards ISO Max. particle size 50 µm. Pressure for determining piston forces. Materials: Polyurethane
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: external thread 1 Standards ISO 21287 Compressed air connection Internal thread Working pressure min./max. 1 bar / 10 bar Ambient
Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
Piston rod cylinders Short-stroke and compact cylinders 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C Medium temperature min./max. -20 C /
Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread, 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C
Directional valves Electrically operated CL03 series-ev. Brochure
CL03 series-ev Brochure 2 Rexroth Pneumatics CL03 series-ev Qn = 700 l/min valve width: 16 mm NO/NC plate connection compressed air connection output: Ø 8 - G 1/8 Manual override: detent 3 Qn = 700 l/min
Preparation of compressed air Supplementary products Pressure gauge. Brochure
Preparation of compressed air Pressure gauge Brochure 2 Preparation of compressed air Pressure gauge Pressure gauge, Series P1-SNL Front port Background color: Scale color: reen / White Viewing window:
Max. particle size 5 µm. Pressure for determining piston forces. Materials:
Rodless cylinders Rodless cylinder 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³
Standards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials:
Bosch Rexroth AG Pneumatics Ø - 100 mm Ports: M5 - double-acting with magnetic piston cushioning: elastic piston rod: Standards ISO 21287 Compressed air connection internal thread 00119673 Working pressure
With Integral Filter and Silencer, Optional Vacuum Switch, Type VADM- Solenoid-Actuated Vacuum Generator with integral filter and silencer Type VADM-
Features and Benefits Solenoid-Actuated Vacuum Generators Types VADM-... / VADMI-... l Integral Filter, Silencer, Manual Override l Integral Solenoid Valve for Controlling Air Supply l Vacuum Range up
Sensor technologies Pressure sensors Series PE5. Brochure
Sensor technologies Pressure sensors Series PE5 Brochure 2 Sensor technologies Pressure sensors Series PE5 Operating pressure: -4.5-74 electronic Output signal digital: 2 outputs - output IO-Link electr.
GSW-V. Application example. Special Gripper Vacuum Gripper. Weight 0.12 kg 0.39 kg. Clamping diameter 20 mm 32 mm
GSW-V Suction pad diameter 30 mm 125 mm Clamping diameter 20 mm 32 mm Weight 0.12 kg 0.39 kg Gripping force 55 N 980 N Workpiece weight 0.28 kg 4.9 kg Application example Handling of gears in a milling
Multi-Stage Ejectors. Multi-Stage Ejectors SEM. Suction rate from 332 l/min to 2,370 l/min. Suitability for Industry-Specific Applications
Multi-Stage Ejectors Suction rate from 332 l/min to 2,370 l/min Suitability for Industry-Specific Applications Applications Multi-stage ejector for handling of cardboard, packing materials, insulating
Valve terminal systems Valve terminal systems Series TC15. Brochure
Series TC15 Brochure Bosch Rexroth AG Pneumatics Series TC15 Valve terminal systems Valve terminal system, Series TC15 Qn max. = 1500 l/min; single plug-in wiring; Electr. connection: plug, form C / Plug
Valve terminal systems Valve terminal systems Series TC08. Brochure
Series TC08 Brochure Bosch Rexroth AG Pneumatics Series TC08 Valve terminal systems Valve terminal system, Series TC08 Qn max. = 800 l/min; single plug-in wiring; Electr. connection: Plug M8 / plug, form
Series BCP standard version double Stroke: mm
1 ersion Bellow actuator with cover Functional principle Single-acting, retracted without pressure Permissible angle of tilt max. Working pressure min./max. bar / bar Ambient temperature min./max. - /
Rodless cylinders Rodless cylinders Series RTC. Brochure
Series RTC Brochure Bosch Rexroth AG Pneumatics Series RTC Rodless cylinder, Series RTC-BV Ø 16-80 mm; double-acting; with magnetic piston; integrated guide; Basic Version; cushioning: pneumatic, adjustable
VSG Series Features Descriptions VSG VSG VSG Descriptions Supply valve Descriptions Vacuum filter
Basic performance oriented general vacuum ejector unit Series Nozzle diameter: ø.5, ø, ø1. acuum switch and vacuum break valve, etc. are unitized, so types matching the work purpose is selectable. Features
Max. particle size 5 µm. Pressure for determining piston forces. Materials:
1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining
-Q- Temperature range C. -L- Operating pressure bar. Vacuum filters ESF Technical data. Function
Vacuum filters Vacuum filters ESF Function -Q- Temperature range 0 +60 C -L- Operating pressure 0.95 +4 bar Accessory for the suction gripper ESG, mounted between suction cup holder and suction cup with
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders
Rotary actuators Rack-and-pinion gears series TRR. Brochure
series TRR Brochure 2 Bosch Rexroth AG Pneumatics series TRR Rotary cylinder, Series TRR angle of rotation: 0-60 Ø2-00 mm with magnetic piston double piston with rack cushioning: pneumatically, adjustable
Rodless cylinders Bellow actuator Bellow actuator with mounting ring, series BCR. Brochure
Rodless cylinders Bellow actuator Bellow actuator with mounting ring, series BCR Brochure 2 Rodless cylinders Bellow actuator Bellow actuator with mounting ring, series BCR single Stroke: 94-135 mm 3 double
Air preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview Air preparation unit three-piece 8 11 12 16, 17 Air preparation unit two piece 8 11 12 16, 17 Air preparation Filter-regulator
Cylinder Accessories Piston rod mountings, series CM2 Rod clevises. Brochure
Cylinder Accessories Piston rod mountings, series 2 Rod clevises Brochure 2 Cylinder Accessories Piston rod mountings, series 2 Rod clevises Rod clevis with lock washer, Series AP2 Stainless steel 3 Rod
with interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Series MD coalescing filters New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 1 mm. Modular assembly Bowl with technopolymer
TopControl Continuous
860 Electropneumatic positioner for pneumatically actuated control valves Type 860 can be combined with... Type 7 Type 70 Types 70/7/7K Type 800 Piston-controlled globe valve Piston-controlled angle seat
1 0,1 0,1-70 0, , , , Cylinder bore <
Working medium, air quality Working medium: Dry, filtered compressed air to ISO 83-1 class 3.4.3. Recommended air quality for valves For best possible service life and trouble free operation, ISO 83-1
ISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings
ISO 632 Cylinders ISO 15552 Cylinders Compact Cylinders TC08 Series Pilot Valves 207-208 209-212 213-21 215 TC15 Series Pilot Valves TC08 Series Solenoid Valves CD7 Series Solenoid Valves CD12 Series Solenoid
Cylinder Accessories Handling connection kits Easy2Combine. Brochure
Cylinder Accessories Handling connection kits Easy2Combine Brochure 2 Cylinder Accessories Handling connection kits Easy2Combine For combination: RTC-HD / RTC-CG 4 For combination: MSC / RCM 7 For combination:
Intelligent Positioner
Intelligent Positioner Construction The GEMÜ 1 µpos is a digital electro-pneumatic positioner for process valve control. Designed for simple, safe and quick use with valves with strokes < mm. The positioner,
SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
Air preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 8 11 12 16, 17 unit two-piece 8 11 12 16, 17 Filter-regulator 8 11 13 16, 17 Filter-water-separator
LS 025 LS 035 In-line mounting Connection up to G¾ / -12 SAE Nominal flow rate up to 33 l/min / 8.7 gpm
Suction Filters LS 025 LS 035 In-line mounting Connection up to G¾ / -2 SAE Nominal flow rate up to 33 l/min / 8.7 gpm Description Application To be installed in the suction line of the pumps of hydraulic
PULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
Vacuum generation Compact ejectors
Energy saving function by integrated pressure control saves up to 5 % of energy q = Vacuum connection z = Compressed air connection Product notes s = Exhaust outlet Check valve with wire mesh to keep out
Vacuum generators 1.1. High vacuum levels of up to 93% Easy connection of holders and suction cups. Lightweight and compact design.
High vacuum levels of up to 93% Easy connection of holders and suction cups Lightweight and compact design No wearing parts Long service life Vacuum monitoring with vacuum switch 2005/07 Subject to change
Exhaust Cleaner for Clean Room. Body size. Symbol Nil. Size 1/4 standard 3/8 standard 1/2 standard. Element construction. Stage 2 stage.
Exhaust Cleaner for Clean oom Series ohs An exhaust cleaner that can be used inside a clean room How to Order 0 0 Exhaust air cleanliness: Equivalent to ISO Class (Class 0 ed.std.0) (Consult SMC in advance,
Air-Operated Double-Diaphragm. High Purity PTFE Pumps
Air-Operated Double-Diaphragm High Purity PTFE Pumps ULTRA High-Purity Series Ultra-High Purity Series was designed specifically for the Semiconductor Yamada s advantages come from years process of experience
Sensor technologies Proximity sensors Sensor mountings. Brochure
Sensor mountings Brochure 2 Sensor mountings for Series ST6, SM6 to mount on cylinder MNI, ICM 4 for Series ST6 to mount on cylinder CSL-RD, ICM, ICS-D1, ICS-D2, RPC 5 for Series ST6 to mount on cylinder
Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
Tie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
Series AN /Series AMC
s/exhaust Cleaner / Noise reduction Nominal filtration rating (eference values) Oil mist removal ratio Standard type Low back pressure Compact and easy mounting 00 30 db (A) 00 µm 50 µm 5-0-2 Compact type
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
Series 581 ISO Pneumatic Directional Control Valves
Series 581 ISO 5599-1 Pneumatic Directional Control Valves Series 581 Pneumatic Valves 01_1 st Headline_36 pt/14.4 mm 4-Way ISO Directional Control second line Series 581 - A complete series of standardized
Vacuum generators Key features
Vacuum generators Vacuum generators Key features Product overview Vacuum generator All Festo vacuum generators have a single-stage design and operate according to the venturi principle. The product families
Vacuum Ejector with Solid State Timer
Vacuum Ejector with Solid State Timer Incorporates solid state timer function for release valve control (Timer setting with PLC is unnecessary) Timing Chart OFF Suction command ON Suction output OFF ON
Compressed Air Conditioning. accessories. One Stop Shop process reliable efficient economical high degree of reusability
Screwdriving technology Automation Air motors Air tools Compressed Air Conditioning and Accessories One Stop Shop process reliable efficient economical high degree of reusability DEPRAG offers a comprehensive
GWS. Application example. Tool Changing Gripper Change System. Handling weight up to 170 kg. Moment load M x up to 400 Nm
GWS Sizes 064.. 125 Handling weight up to 170 kg Moment load M x up to 400 Nm Moment load M y up to 400 Nm Moment load M z up to 600 Nm Application example Replacing and placing tools in a gripper changing
Intelligent Positioner
Intelligent Positioner Construction The GEMÜ epos digital electro-pneumatic positioner detects the valve position via its external LongLife travel sensor. It has a solid housing with protected operating
Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve
Type 367 Solenoid Valve Application Solenoid valve for controlling pneumatic linear actuators with NAMUR rib according to IEC 60534 or pneumatic rotary actuators with NAMUR interface according to VDI/VDE
Subject: Pneumatic Training Kit with portable Air Compressor
MSME TOOL ROOM: HYDERABAD (CENTRAL INSTITUTE OF TOOL DESIGN) Balanagar, Hyderabad 500 037 TEL.NO.23772747, 23776168 FAX No.0-4023772658 E-mail:citdpurchase@citdindia.org Visit us: www.citdindia.org. TENDER
Type 3379 Pneumatic Actuator. Mounting and Operating Instructions EB 8315 EN
Type 3379 Pneumatic Actuator Mounting and Operating Instructions EB 8315 EN Edition October 2014 Definition of signal words DANGER! Hazardous situations which, if not avoided, will result in death or serious
DDF. Application example. Feed-through Rotary Feed-through for Robots. Max. speed. Air feed-through. Sizes 031..
DDF www.comoso.com Sizes 031.. 160 Max. speed Air feed-through 120 1 min 2x.. 4x Electrical feed-throughs Up to 10x Application example Insertion tool for assembling small to medium-sized axes. The rotary
Cylinder Accessories Cylinder mountings; series CM1 Trunnion mountings. Brochure
Cylinder Accessories Cylinder mountings; series CM1 Trunnion mountings Brochure 2 Cylinder Accessories Cylinder mountings; series CM1 Trunnion mountings Center trunnion mounting, Series MT4 for Series
Blowers. SILENCE 54 ASO 55 ROBUST 56 AIRPACK 57 MONO 58 Frequency Converter 59 Accessories General Catalog Process Heat
52 SILENCE 54 ASO 55 ROBUST 56 AIRPACK 57 MONO 58 Frequency Converter 59 Accessories 6 www.leister.com General Catalog Process Heat 53 SILENCE: The quieter option. No blower no air! In industrial processes
Simple venturis, series GVP
Simple venturis, series GVP 5-bar compressed air network 45 13 5 35 L1 Exhaust D1 L 1/4 gas, 6x8 quick-connect or 4x6 quick-connect D 30 Connection for options 6 Vacuum 1/ gas Vacuum generators in series
Series ZQ. Compact Vacuum Ejector. One-touch fitting. Digital vacuum pressure switch With LED display. ZX ZR ZM ZH ZU ZL ZY ZQ ZF ZP ZCU AMJ Misc.
Compact acuum Ejector Series Body width mm, Weight9 g (Single unit with vacuum pressure switch and suction filter) Conventional 21.mm mm One-touch fitting ZR ZM ZH ZU ZL ZY ZF Z ZCU AMJ Misc. Digital vacuum
Vacuum generators OVEM
Key features At a glance Accelerated vacuum reduction for safe placement of the workpiece by means of integrated solenoid valve for controlling the ejector pulse Central electrical connection via M12 plug
SRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.
SRU-mini Sizes 8 14 Weight 0.15 kg 0.65 kg Torque 0.16 Nm 1.15 Nm Axial force 255 N 330 N Bending moment 2.5 Nm 4.5 Nm Application example Reversing unit for the economical reorientation of cylindrical
Vacuum generators OVEM
Key features At a glance Rapid purging of vacuum for safe placement of the workpiece by means of an integrated solenoid valve for controlling the ejector pulse Central electrical connection via an M12
ES 074 ES 094 Tank top mounting Connection up G1¼ Nominal flow rate up to 80 l/min
Suction Filters ES 074 ES 094 Tank top mounting Connection up G1¼ Nominal flow rate up to 80 l/min Description Application To be installed in the suction line of the pumps of hydraulic systems resp. upstream
0322, 0324, Pilot Solenoid Valve, Plastic
Pilot Solenoid Valve, Plastic Construction The directly controlled GEMÜ 3/2-way pilot solenoid valve consists of an epoxy encapsulated detachable coil and a plastic body. The electrical connection is made
Control unit for valves with inflatable sealing system
Control unit for valves with inflatable sealing system Type ICS A model from the system -vacotrol Shut-off valves are used in transport equipment for bulk powder and granulate, whose shut-off mechanism
ES 134 ES 144 Tank top mounting Connection up to SAE 1½ Nominal flow rate up to 130 l/min
Suction Filters ES 134 ES 144 Tank top mounting Connection up to SAE 1½ Nominal flow rate up to 130 l/min Description Application To be installed in the suction line of the pumps of hydraulic systems resp.
Cost effective. Productive. Compliant. GSW-M Magnetic Gripper
Cost effective. Productive. Compliant. Magnetic Gripper Vacuum gripper for spindle interfaces is ideal for handling flat components. Field of Application Unit for automatic loading and unloading of machining
PA-S small filter. Technical Data G 1/8
PA-S small filter PA-S small filter G 1/8 Bowl material Polyamid Head material Polypropylene Gasket material Buna-N Filter material PE 5µm, 35µm or 80µm Temperature Min./Max. C 5-50 Maximum pressure bar
Magnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF)
Level measurement Magnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF) TC Fluid Control WIKA data sheet LM LM 3001 30.01 for further approvals see page 3 Applications
PNEUMATIC LINEAR ACTUATORS SECTION 1
PNEUMATIC LINEAR ACTUATORS SECTION 1 1-888-638-6337 Typical Applications: Larger versions of these examples are available on the CD-ROM version of our catalog or on our web site: www.meto-fer.com Subject
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
System 6000 Electropneumatic Converter for Direct Current Signals i/p Converter Type 6126
System 6 Electropneumatic Converter for Direct Current Signals i/p Converter Type 66 Application Devices used to convert a direct current signal into a pneumatic signal for measurement and control. Especially
Vacuum Accessories. Pneumatic. Section E. Pneumatic. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Vacuum Accessories Section E E 1 Notes 2 Index Contents Convum Filters... 4-5 Convum Silencers... 6 Silencer (Flow Thru)... 7 ASN Series Air Line Mufflers... 8 E 3 (Revised 10/13/04) Ordering Information
Parallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
INDUSTRIAL DYEING PUMPS
INDUSTRIAL DYEING PUMPS ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI WARRANTY GARANZIA Made In In Italy HELP THE NATURE Packaging contains, depending
Suction Pads for Plastic Films and Paper
for Plastic Films and Paper Flat SGN 25 K to SGN 40 K Suction area (Ø) from 25 mm to 40 mm Suitability for Industry-Specific Applications Applications Round, flat suction pad for handling of paper, plastic
Mounting and Operating Instructions EB 3913 EN. Electropneumatic Converters i/p Converter Type
Electropneumatic Converters i/p Converter Type 3913-0001 Fig. 1 Type 3913-0001 Electropneumatic Converter with pressure gauge and bracket Mounting and Operating Instructions EB 3913 EN Edition August 2011
Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
3-4 Non-Metallic Fiberglass Air Operated Double Diaphragm Pumps. EU product Made in Italy
EU product Made in Italy - 4 on-metallic Fiberglass Air Operated ouble iaphragm Pumps AO FRP range AO PUMPS MAE OF COMPOSITES: THE FIRST A UIQUE OF THIS KI I THE WORL. Argal proposes in this catalog, the