Electric Motors. Electric Motors

Transcription

1 Basic Specifications and -2 Three Phase TFC General Purpose Motors -3 to -5 Single Phase TFC General Purpose Motors -6 SyMax Permanent Magnet AC Motors -6 Totally nclosed Brakemotors -7 PowerWash XT Washdown Motors -8 PowerWash SXT Stainless Steel Motors -9 Inverter Duty Motors -0 Permanent Magnet DC Motors - Motor Dimensions Table -2 lectric Motors MAIL: hubsales@regalbeloit.com -

2 Performance matched to Hub City TM gear drives. Basic Specifications Power ratings from /4 to 50 hp.5 service factor Operating speed 750 rpm Single phase or three phase design Standard Motors produced by Regal for high efficiency, reliability and durability UL recognized and CSA certified Ball bearings for endurance and strength Totally enclosed general purpose motors feature steel frames Brake motors feature Stearns * brakes, bolt-on removable bases Washdown motors feature USDA approved white epoxy paint, 303 stainless steel shafts, internal corrosion resistant coatings and class F insulation system Inverter duty motors feature encoder and brake provisions, class F insulation system, and three year warranty DC motors feature oversized brushes for long life, class F insulation system, and two year warranty. *Stearns is believed to be the trademark of Rexnord Industries, LLC and is not controlled by Regal Beloit Corporation. Optional Adjustable speed motor controls available Modified standard and custom designs CleanLine washdown and BISSC configurations Unique or harsh environment adaptations Motor/gear drive package incentives available, consult factory DON T S TH MOTOR YOU ND? CONTACT FACTORY. MANY MOR STOCK MOTORS AVAILABL. -2 CALL: (605) FAX: (605)

3 General Purpose, Three Phase Totally nclosed, 800 RPM SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. Applications: General purpose use on gear reducers, pumps, machine tools, and other direct-coupled equipment installed in damp, dusty, or dirty environments. Additionally, cast iron frame motors may be suitable for the process industries. C-FAC LSS HP VOLTS FRAM NOM. FF. / /460 56C K / N,20,24,68 / /460 56C K / ,68, / /460 56C K / ,24 3/ /460 56C K / ,24,68 230/460 56C G527A / A,BI,9,68 /2 230/460 45TC C22B / BI, /460 45TC C222A / /460 82TC C223C / ,24, /460 84TC C224B / ,24,68 7 /2 230/460 23TC C225C / F,24, /460 25TC C226B / F,24, / TC C227B / AL,F,24,68 CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. : 3 F MOUNTING ONLY, CANNOT RASSMBL TO F SRVIC FACTOR SRVIC FACTOR 24 MOTOR WILL NOT ACCPT A BRAK KIT 68 RATD 60/50 HRTZ, 90/380 OR 380 VOLT AT NXT LOWR HORSPOWR.30 SRVIC FACTOR A NMA * DSIGN A AL ALUMINUM FRAM CONSTRUCTION BI CLASS B INSULATION N TOTALLY NCLOSD, NON-VNTILATD F CLASS F INSULATION : Ball bearings, mechanically locked on shaft end (excludes 5K models) Rated 60/50 hertz, 90/380 or 380 volt, at next lower horsepower (as noted).5 Service Factor (except as noted) Rolled steel 56-45T frame motors accept brake kits (except as noted) consult factory. UL Recognized and CSA Certified Application Guidelines Guidelines for Application General Purpose, Three Phase Motors on Variable Frequency Drives Meets NMA MG--998 Part 30 and Part 3 Section VOLT C-FAC LSS HP VOLTS FRAM NOM. FF. / C K / C K ,24,68 / C K ,24,68 3/ C K ,24, C G528A / TC C23B A,BI TC C232B A,24 CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. : 9.25 SRVIC FACTOR SRVIC FACTOR 24 MOTOR WILL NOT ACCPT A BRAK KIT 68 RATD 60/50 HRTZ, 90/380 OR 380 VOLT AT NXT LOWR HORSPOWR lectric Motors NCLOSUR FFICINCY FRAM 0: VARIABL TORQU 2: C.T. CONSULT FACTORY FOR GUIDLINS IN APPLYING XPLOSION PROOF MOTORS ON INVRTRS. CARRIR FRQUNCY IS MASURD PHAS-TO-PHAS, NOT PHAS-TO-BUS. HIGHR CARRIR FRQUNCIS RQUIR SHORTR CABL. CONSULT FACTORY FOR DTAILS. MAXIMUM INVRTR TO MOTOR CABL 3KHZ CARRIR 230 V 460 V 575 V Totally nclosed Standard X 600 ft 25 ft 40 ft *NMA Premium is believed to be the trademark or trade name of National lectrical Manufacturers Association and is not controlled by Regal Beloit Corporation. Contact factory MAIL: hubsales@regalbeloit.com -3

4 General Purpose, Three Phase, 800 RPM Globetrotter NMA Premium * fficiency, Totally nclosed Meets or exceeds NMA Premium efficiencies; NMA Premium models are in compliance with ISA2007 Hazardous Duty TM Division 2 / Zone 2 Class (gases), Groups A, B, C, D UL certification nameplate Temp code T2B, 82TC-449TC IP55 enclosure on 254TC to 449TC Cast iron frame and brackets Inverter Duty 0: Variable Torque and 0: Constant Torque,.0 SF (except as noted).5 Service Factor Class F Insulation Standard assembly F, reversible to F2 assembly UL Recognized, CSA Certified, C Mark Three year warranty SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. C-FAC D (RIGID BAS) HP VOLTS FRAM CATALOG / /2 0 5 NOM. FF /460 43TC GT / TC GT A /460 45TC GT / TC GT A /460 45TC GT / A TC GT A /460 82TC GT20A / TC GT40A /460 84TC GT23A / TC GT43A /460 23TC GT26A 9.7 9/ TC GT46A /460 25TC GT29A / TC GT49A / TC GT222A / TC GT422A / TC GT225A / / TC GT228A / YD / TC GT23A / YD / TC GT234A / YD / TC GT237A / YD / TC GT240A / YD / TC GT243A / YD / TC GT246A / YD CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. BLU SHADD ARAS AR CAST IRON FRAMS. : A NMA DSIGN A YD 2 LADS FOR WY-DLTA, PART WINDING ON LOW VOLTAG, OR ACROSS-TH-LIN STARTING *NMA Premium is believed to be the trademark or trade name of National lectrical Manufacturers Association and is not controlled by Regal Beloit Corporation. Contact factory. -4 CALL: (605) FAX: (605)

5 Ball bearings, mechanically locked on shaft end (excludes 5K models).5 Service Factor (except as noted) Class F insulation (except as noted) Rated 60/50 hertz, 90/380 or 380 volt, at next lower horsepower (as noted) 56-45T frame motors, accept brake kits, see accessory kits UL Recognized and CSA Certified Two year warranty on non bold blue catalog numbers Three year warranty on NMA Premium * efficient (bold blue catalog numbers) lectric Motors General Purpose, Three Phase, 800 RPM Totally nclosed (Four in One) Additional for 4-in- Motors Only CR200 Corona resistant magnet wire Bolt-on, removable rigid base Suitable for horizontal and vertical mounting Will accept drip cover kits, see Accessories section SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. C-FAC D (RIGID AND RMOVABL BAS) HP VOLTS FRAM /3 /2 3/4 / /2 0 FOUR IN-ON NOM. FF /460 56C YS G / N,6,3,24, C YS K N,6,3, /460 56C YS G / ,3, C YS K , /460 56C YS G / ,3, C YS K ,3 230/460 56HC YS G583A / ,6,3, HC YS K709A ,6,3 230/460 56HC YS G584A / ,6,3, HC YS K722A ,6,3 230/460 56HC YS G585A / ,6,3, HC YS K724A ,6, /460 82TC YS C382B / ,3,24, TC YS C383B ,3,24 230/460 84TC YS C386B / ,3,24, TC YS C387B ,3,24, /460 23TC YS C390B / ,24, TC YS C39B , /460 25TC YS C393B / ,24, TC YS C394A ,24 CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. lectric Motors : 5 56H, 43T, AND 45T COMBINATION BAS WITH 2 MOUNTING HOLS 6 BOLT-ON RMOVABL BAS FOR LSS MOUNTING OPTION 3 F MOUNTING ONLY, CANNOT RASSMBL TO F2 24 MOTOR WILL NOT ACCPT A BRAK KIT 68 RATD 60/50 HRTZ, 90/380 OR 380 VOLT AT NXT LOWR HORSPOWR N TOTALLY NCLOSD, NON-VNTILATD *NMA Premium is believed to be the trademark or trade name of National lectrical Manufacturers Association and is not controlled by Regal Beloit Corporation. Contact factory MAIL: hubsales@regalbeloit.com -5

6 General Purpose, Single Phase, 800 RPM, Totally nclosed Ball bearings mechanically locked on shaft end (excludes 5K models) Heavy gauge steel constructions Suitable for horizontal or vertical mounting conomical split phase or capacitor start designs, as noted Service factor, as noted UL recognized and CSA certified C-FAC LSS HP VOLTS FRAM OVR LOAD /6 5 56C NON H ,7,24 /4 5/230 56C NON G5 5.4/ ,7,24 /3 5/230 56C NON G53 6.0/ ,8,24 /2 5/230 56C AUTO C / ,8,24 5/230 56C NON G55 8.6/ ,8,24 3/4 5/230 56C NON G57.0/ ,7,24 5/230 56C NON G59 3.2/ ,7,24 /2 5/ C NON G53 4.5/ S,,8,24 : CAPACITOR START/CAPACITOR RUN DSIGN FOR RDUCD AMPRAG 2 CAPACITOR START INDUCTION RUN DSIGN 3 SPLIT PHAS DSIGN 7.0 SRVIC FACTOR 8.5 SRVIC FACTOR 24 MOTOR WILL NOT ACCPT A BRAK KIT S NRGY SAVR DSIGN SyMax Permanent Magnet AC Motors, TNV & TFC Three Phase, 800 RPM High power density, low weight design Provisions for optional BCP (Bearing Current Protection) Three year warranty Requires drive for operation Additional for Commercial, Rolled Steel Frame (NMA 56 frame models) Meets or exceeds NMA Premium * (I3) Class F MAX GUARD insulation system Operational to 20: constant torque open-loop (000: closed-loop) IP43 ingress protection Totally enclosed, non-ventilated Sealed ball bearing -6 HP VOLTS NMA TORQU NOM. FRAM (LB-FT) FF. /2 230/460 56C.5 SY / N 230/460 56C 2.9 SY / N /2 230/460 56C 4.4 SY / N 2 230/460 56C 5.8 SY / N 3 230/460 82TC 8.8 SY006A / N 5 230/460 84TC.7 SY007A / N 7 /2 230/460 23TC 2.9 SY008A / N 0 230/460 25TC 29.2 SY009A / N TC 43.8 SY TC 58.4 SY TC 72.9 SY TC 87.5 SY , *NMA Premium is believed to be the trademark or trade name of National lectrical Manufacturers Association and is not controlled by Regal Beloit Corporation. Additional for Industrial, Cast Iron frame (NMA T frame models) Ultra fficient Premium-Plus exceeds NMA Premium (I4) Class H MAX GUARD insulation system Cast iron construction for rigidity & reduced vibration IP54 ingress protection Premium severe duty Normally closed thermostats (one per phase, Class F) UL, CSA and C Mark : N TOTALLY NCLOSD, NON-VNTILATD CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. BLU SHADD ARAS AR CAST IRON FRAMS. CALL: (605) FAX: (605)

7 Brake Motors Single Phase, 800 RPM, Totally nclosed, C-Face Footed (Removable Base) Fail-safe, spring set Stearns* 56 Series brake for holding or stopping Brake has manual wear adjustment for longer pad life Manual release lever on rear of brake housing Brake leads are terminated at the brake Universal mounting, no modifications needed Brake coil voltage matches motor voltages Ball bearings, mechanically locked on shaft end.5 service factor (.0 service factor as noted) Nameplated 60/50 hertz at next lowest horsepower UL recognized and CSA certified HP VOLTS FRAM CATALOG BRAK RATING (lb/ft) /3 5/ C D / ,6 /2 5/ C D40 8.8/ ,6 3/4 5/ C D402.0/ ,6 5/ C D / ,6 /2 5/ C D / ,6 : CAPACITOR START/CAPACITOR RUN DSIGN FOR RDUCD AMPRAG 2 CAPACITOR START INDUCTION RUN DSIGN 6 BOLT-ON RMOVABL BAS FOR LSS MOUNTING OPTION Three Phase, 800 RPM, Totally nclosed, C-Face Footed (Rigid or Removable Base) In addition to the Single Phase above: Brake has manual wear adjustment up to 25 lb-ft. for longer pad life Stearns brakes, 56 series through 25 Lb-Ft, 87 series above 35 Lb-Ft and larger Brake leads routed through motor conduit box (TNV only) Universal mounting up to 5 Lb-Ft, C406 has vertical springs included CR 200 Corona resistant magnet wire (motor can be operated 0: variable torque and 2: constant torque).5 service factor,.0 service factor where footnoted HP VOLTS FRAM BRAK RATING (lb/ft) / /460 56C D / / /460 56C D / / /460 56C D / /460 56C D456A 3.3/ /2 230/460 56HC D457A 4.6/ /460 45TC C40A 4.6/ /460 45TC C403A 6.0/ /2 230/460 23TC C407A 9.2/ AL,F,N, /460 25TC C / AL,F,N,7 SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. : 6 BOLT-ON RMOVABL BAS FOR LSS MOUNTING OPTION 7.0 SRVIC FACTOR 82 WLDD RIGID BAS AL ALUMINUM FRAM CONSTRUCTION F CLASS F INSULATION N TOTALLY NCLOSD, NON-VNTILATD Contact factory. lectric Motors *Stearns is believed to be the trademark of Rexnord Industries, LLC and is not controlled by Regal Beloit Corporation. MAIL: hubsales@regalbeloit.com -7

8 Powerwash XT Washdown Duty, 800 RPM White poxy, Totally nclosed Double sealed ball bearings 303 Stainless steel shaft with spring loaded contact seals in each endshield (drive end only on TNV motors) Stainless steel conduit box cover, nameplate, fan guard (TFC) and hardware Cast oversized conduit box with high temperature nitrile gaskets and threaded entrance Plugged drain holes in each endshield for all angle mounting Internal corrosion resistant coatings on frame, base, endshields, rotor and stator USDA-approved, white epoxy RUST-OLUM * paint UL Recognized, CSA Certified and C Mark ncapsulated electronic starting switch is impervious to moisture (single phase only) Capacitor start induction run design for high starting torque unless otherwise noted (single phase only) Class F insulation (single phase only).5 service factor (single phase only).5 service factor on sinewave,.0 service factor on IGBT power (three phase only) IP55 SINGL PHAS C-FAC LSS HP VOLTS FRAM CATALOG /3 5/ C N53 6.4/ /2 5/ C N / /4 5/ C N / / C N / /2 5/ C N / THR PHAS C-FAC LSS HP VOLTS FRAM CATALOG NOM. FF. / /460 56C N / N / /460 56C N / N / /460 56C N / N 3/ /460 56C N / N 230/460 56C N646A / V 230/460 43TC N647A / V /2 230/460 43TC N650A / V 2 230/460 45TC N654B / TBD V 3 230/460 82TC N656C / V 5 230/460 84TC N658C / V CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. : 3 F MOUNTING ONLY, CANNOT RASSMBL TO F2 N TOTALLY NCLOSD, NON-VNTILATD V SUITABL FOR 0: CT 60 MINUT DUTY, OTHRWIS 2: CT Contact factory. SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. IP55 *Rust-Oleum is believed to be the trademark or trade name of Rust-Oleum Corporation and is not controlled by Regal Beloit Corporation. -8 CALL: (605) FAX: (605)

9 Powerwash SXT Washdown Duty, 800 RPM All Stainless Steel, Totally nclosed Double sealed ball bearings 303 stainless steel shaft with spring loaded contact seals in each end. (Drive end only on TNV) 300 Series Stainless steel external construction: frame, endshields, conduit box, mounting base and hardware for superior corrosion resistance Internal corrosion resistant coatings on rotor and heavy polyester varnish on the stator 00% Paint-free construction One way condensation drains in each endshield and conduit box for all angle mounting Nitrile Buna - N gaskets and seals on conduit box, through bolts and endshields Nameplate information laser etched on frame UL recognized, CSA certified and C mark ncapsulated electronic starting switch is impervious to moisture (single phase only) Capacitor start induction run design for high starting torque unless otherwise noted (single phase only) Suitable for use on VFD 0: variable torque, 0: (TFC) or 000: (TNV) constant torque (3 phase only) MAX GUARD Class F insulation system (3 phase only).5 Service Factor on sinewave,.0 Service Factor on IGBT power (3 phase only) Rated 60/50 hertz, 90/380 volt at next lower horsepower (3 phase only) SINGL PHAS C-FAC D (RIGID BAS) HP VOLTS FRAM THR PHAS C-FAC LSS HP VOLTS FRAM CATALOG NOM. FF. / /460 56C N / N / /460 56C N / N 3/ /460 56C N / N /2 2 CATALOG /2 5/ C N34 8.2/ /4 5/ C N / / C N / /2 5/ C N / / TC N / /460 56C N433A / /460 43TC N434B / /460 56C N435A / /460 45TC N436A / /460 56C N437A / /460 45TC N438B / SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. IP55 lectric Motors CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. : N TOTALLY NCLOSD, NON-VNTILATD Contact factory. MAIL: hubsales@regalbeloit.com -9

10 Inverter (Vector) Duty: Black Max, 800 RPM 000: Contact Torque, TNV, Three Phase Motors Applications: Designed for inverter or vector applications where up to a 000: constant torque speed range is required. Typical uses include: material handling, machine tools, conveyors, crane and hoist, metal processing, test stands, pumps compressors, textile processing, and other industrial machinery installed in dusty or dirty environments. : MAX GUARD Class F insulation system Constant torque operation from 0 to base speed on vector drive Constant horsepower operation up to twice base RPM Continuous duty at 40ºC ambient Optimized for operation with IGBT inverter (NMA Design A) Normally closed thermostats (one per phase, Class F) Removable rigid base, as noted Ball bearings Field reversible to F2 (except as noted) ncoder and brake provisions included on opposite drive end (maximum 0 lb-ft brake) UL recognized, CSA certified, and C mark Three year warranty SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. C-FAC D (RIGID BAS) HP VOLTS FRAM OVR LOAD /4 230/460 56C TSTAT Y592.2/ S,3 /2 230/460 56C TSTAT Y534.6/ S,6, C TSTAT Y S,6,3 230/460 56C TSTAT Y / S,6, C TSTAT Y S,6,3 230/460 43TC TSTAT Y / S,6,3 /2 230/460 45TC TSTAT Y / S,6, / /460 45TC TSTAT Y62 6.0/ S,6,3 230/460 45TC TSTAT Y55 6.0/ TC TSTAT Y S,6, TC TSTAT Y /460 82TC TSTAT Y54A 8.2/ AL TC TSTAT Y558A AL 230/460 84TC TSTAT Y543A 3.4/ AL TC TSTAT Y559A AL 230/460 23TC TSTAT Y / AL TC TSTAT Y AL 230/460 25TC TSTAT Y / AL TC TSTAT Y AL 230/ TC TSTAT Y / AL,I TC TSTAT Y AL,I 230/ TC TSTAT Y / TC TSTAT Y / TC TSTAT Y / I TC TSTAT Y I 230/ TC TSTAT Y / I TC TSTAT Y I BLU SHADD ARAS AR CAST IRON FRAMS. : 6 BOLT-ON RMOVABL BAS FOR LSS MOUNTING OPTION 3 F MOUNTING ONLY, CANNOT RASSMBL TO F2 I RDUCD 20 HZ S STL FRAM CONSTRUCTION AL ALUMINUM FRAM CONSTRUCTION -0 CALL: (605) FAX: (605)

11 DC Permanent Magnet, 750 RPM SCR Rated, Totally nclosed C-Face Footed (Removable Base) Class F insulation NMA C-Face with removable rigid base Oversized brushes for extra long life Permanently lubricated sealed ball bearings Linear speed/torque characteristics over entire speed range High starting torque, high peak current capability Usable on PWM type DC adjustable speed drives at higher HP rating asy brush access with unique brush holder design UL recognized and CSA certified HP /4 DC VOLTS FRAM NCL. C.T. SPD RANG PWM HP RATING 90 56C TFC Z602 2: C TFC Z603 2: / C TFC Z604 2: /2 3/4 / C TFC Z606 2: C TFC Z607 2: C TFC Z60 2: C TFC Z6 2: C TFC Z62 2: C TFC Z63 2: C TFC Z64 2: TC TFC Z65 2: TC TFC Z66 2: /45TC TFC Z67 2: : 84 NMA 45T C-FAC MOUNTING WITH RMOVABL 82T RIGID BAS lectric Motors Washdown Class F insulation NMA C-Face with removable rigid base Oversized brushes for extra long life Doubled sealed, oversized ball bearings Corrosion resistant 303 stainless steel shaft V ring Forsheda* seals High temperature, moisture resistant lubricant xterior and interior components protected with enamel & polyester compounds Aluminum conduit box, threaded and gasketed Drains at 3:00, 6:00, 9:00 and 2:00 locations Sealed machine fits Stainless steel nameplate USDA approved white epoxy paint UL recognized and CSA certified HP DC VOLTS FRAM NCL. C.T. SPD RANG PWM HP RATING / C TNV Z630 20: / C TNV Z63 20: / C TNV Z634 20: / C TNV Z636 20: C TNV Z637 20: C TFC Z638 2: C TFC Z639 2: / C TFC Z64 2: *Forsheda is believed to be the trademark of Trelleborg Forsheda Building AB and is not controlled by Regal Beloit Corporation. MAIL: hubsales@regalbeloit.com -

12 TYPICAL C-FAC MOTOR TYPICAL RIGID BAS MOTOR C* (48-84) (82T-449) BB AH AH AB 45 P 45 C * N-W AB P BS 2F B BA U AK BD AA LAD HOL 'H' DIA 4 HOLS AJ A BF 4 HOLS O D F (B) BS BA U AA LAD HOL 'H' DIA. 4 HOLS A O D FRAM D 2F H O P AB BB BD U N-W AA AH AJ AK BA (MAX) (MAX) (MAX) (MIN) (MAX) BF SLOT / / SLOT / /8-6 56H SLOT / /8-6 43T / /8-6 45T / / / / / /8-6 82T / /2-3 84T / / / /2-3 23T /2-3 25T / U / / U / / T / / T / / U / / U / / T / / T / / TS / / TS / / U /8-326U /8-324T /8-326T /8-324TS /8-326TS /8-364U / /8-365U / /8-364T / /8-365T / /8-364TS / /8-365TS / /8- *C DIMNSIONS AR SHOWN ON MOTOR PAGS -3 TO -. FOR SAFTY AND TO COMPLY WITH LOCAL AND NATIONAL SAFTY CODS, TH PURCHASR OR USR MUST PROVID PROTCTIV GUARDS OVR ALL SHAFT XTNSIONS AND DVICS MOUNTD THRON. Contact factory. -2 CALL: (605) FAX: (605)