MOTOR ACCESSORIES C FLANGE KITS

Transcription

1 MOTOR ACCSSORIS C LANG KITS NMA C AC KITS STL RAM MOTORS Includes parts to convert a rigid base mounted motor to NMA C face with base. The C ace Kits cannot be used as replacements on a factory-produced C face motor. NMA C AC KITS CAST IRON MOTORS Includes parts to convert a rigid base mounted motor to NMA C face with base. The C ace Kits cannot be used as replacements on a factory-produced C face motor. or motors with Catalogue Numbers C ace Kit List Disc. Wgt. rame nclosure Catalogue Number Price Sym. (lbs.) or 150 Series and 170 Series Cast Iron Motors Only C ace Kit List Disc. Wgt. rame nclosure Catalogue Number Price Sym. (lbs.) 42 Open / nclosed $36 A 2 143T-145T nclosed $90 C Open / nclosed A 2 182T-184T Open ➂ 95 C 12 S56 Open A 2 nclosed C 12 nclosed A 2 213T-215T Open C 14 Open / nclosed A 2 nclosed C Open A 2 254T-256T Open C 25 nclosed A 2 nclosed C 25 (see note 2) Severe Duty A 5 284T-286T Open C 42 nclosed M A 2 nclosed C T-145T Open B 2 324T-326T Open C 57 nclosed B 2 nclosed M B 2 nclosed C T-184T Open / nclosed Δ 95 B 2 364T-365T Open C 75 nclosed C T-184T Special Open / nclosed B 5 404T-405T Open C 80 nclosed C 80 S213T Open / nclosed Δ 100 B 2 444T-445T Open C 9 213T-215T Open B 19 nclosed * 680 C 100 (1750 RPM) Open B 19 nclosed B nclosed C 120 nclosed B 15 NOT: When changing a rigid mount motor to C ace for 213T, 215T, 254T and 256T frames, 213T-215T ODP B 15 a non-nma BA dimension results. (3450 RPM) nclosed B 15 NOT: 1) When changing a rigid mount motor to C ace for 140T-256T frames, a non-nma BA dimension results. e.g. M ) Some larger HP 56-frame motors have larger shaft-end bearings and require a 143T-145T C ace kit. Contact LSON. NMA C AC KITS WATTSAVR MOTORS Special conversion kits for use exclusively on WATTSAVR cast iron frame motors. C ace Kit List Disc. Wgt. rame nclosure Catalogue Number Price Sym. (lbs.) 182T-184T nclosed $95 C T-215T nclosed * 141 C T-326T Open C T-365T Open C 75 nclosed C 75 *Locked bearing * Not suitable for 2 pole motors Use these kits for new-design 213T and 215T motors that have external thru-bolts Δ Use this kit for 182-4T and S213T motors with catalogue numbers and higher, or with a G prefix. Both open and enclosed motors in this series use the same kits as ventilation is in the frame of the motor. Not TS rame. or older cast iron motors with date code C93 or earlier. or use with motors having P suffix on date code. Converts a 182T-184T frame motor to the C-face dimensions of a 143T-145T or 182U184U frame motor -- AJ = 5 7 8, AK = Does not change the shaft extension or BA dimension to match the other frame sizes. or use with 3450 RPM, 213T-215T (213JP-215JP) motors only. or use with Industry-Ag motors only. or use with AC motors having P suffix on date code. Results in non-nma shaft and BA dim. Not for use with WATTSAVR motors. 1 WATTSAVR II design, having oversized frame body. 2 or use with motors having date codes May 2003 and later. ➂ Not for modifying stock motors. SHADD RAM INDICATS CAST IRON CONSTRUCTION 85

2 86 MOTOR ACCSSORIS ILD INSTALLD NMA D LANG KITS STL AND CAST IRON RAM MOTORS Includes parts to convert a rigid base mounted motor to NMA D face with base. Shaded frame indicates cast iron motor kits for 150 and 170 series motors. NOT: The D lange Kits can only be used on rigid base motors. They will not fit NMA C face motors. D lange Kit List Disc. Wgt. rame nclosure Catalogue Number Price Sym. (lbs.) 143T-145T nclosed $95 C T-184T Open A 12 nclosed A 12 nclosed C 12 Open C 12 ODP/TC A T-215T Open C 14 nclosed C T-256T Open C 25 nclosed C T-286T Open C 42 nclosed C T-326T Open C 57 nclosed C T-365T Open C T-365T nclosed C T-405T Open C T-405T nclosed C T-445T Open C T-445T nclosed C T nclosed C 160 or use with rolled steel motor NMA D LANG KIT WATTSAVR MOTORS Special conversion kit for use exclusively on WATTSAVR cast iron frame motors. D lange Kit List Disc. Wgt. rame nclosure Catalog Number Price Sym. (lbs.) 182T-184T nclosed * $110 C T-184T nclosed C T-215T nclosed C T-326T Open C T-365T Open ffi 701 C 72 nclosed ffi 701 C 72 *Locked bearing RODNT SCRN KITS Catalog List Disc. Wgt. rame nclosure Number Price Sym. (lbs.) 182T-184T* Open $101 C 1 213T-215T* Open C 1 254T-256T Open C 2 284T-286T Open C 3 324T Open C 5 326T Open C 4 *Rolled steel frame only. Use this kit for 182-4T and S213T motors with catalog numbers and higher, or with a G prefix. Both open and enclosed motors in this series use the same kits as ventilation is in the frame of the motor. W or use with 213T-215T 3450 RPM motors only. u or use with motors having P suffix on date code. t or use with motors having catalog numbers 15XXXX, G15XXXX, or 17XXXX. _ Not for use with WATTSAVR motors. or use with motors having date codes earlier than May or use with motors having date codes May 2003 and later. or use with 1140 and 1750 RPM motors only. ffi WATTSAVR II design, having oversized frame body. CHMICAL SRVIC/ SVR DUTY CONVRSION KITS Cast iron fan covers for 150 Series and 170 Series cast iron motors. Designed to easily convert TC motors to all cast iron construction. All these motors have inert, corrosion resistant fiber filled thermoplastic fan as standard. Kit includes one cast iron fan cover. rame Catalogue Number List Price Disc. Sym. Wt. (lbs.) 182T-184T $139 C T-215T C T-256T C T-286T C T-326T C T-365T C T-405T C T C T-449T C 85 TXTIL LINT-PROO KITS Needed parts to convert one TC motor to lint proof construction. Catalogue List Disc. Wgt T-145T $61 A 2 182T-184T A 3 DRIP-COVR KITS OR DRIP-PROO MOTORS ach kit includes one drip-cover. Designed to protect drip-proof motors from rain, snow and ice when mounted outdoors in a vertical position. Catalogue List Disc. Wgt. 48-S $26 A 2 48-S A A 2 143T-145T A 2 182T-184T A 3 213T-215T A 3 DRIP COVR KITS OR DRIP-PROO MOTORS CAST IRON Catalogue List Disc. Wgt Dripcover $85 A Dripcover 92 A Dripcover 109 A 7 or use with motors having P suffix on date code. DRIP-COVR KIT OR TC MOTORS or use with 1750 RPM steel frame motors only. Catalogue numbers in blue are NW items. Catalogue List Disc. Wgt. 213T-215T $59 B 12

3 MOTOR ACCSSORIS BLOWR AN KITS NCODR KITS BLOWR AN KITS These kits are used for converting 150, 160 and 170 Series Cast Iron TC motors to Totally nclosed Blower Cooled motors. Cooling per MG1.6 (IC46) The kits are designed for inverter and vector drive applications where continuous cooling is required regardless of motor shaft speed. The kit is mounted on the back of the motor after removing the fan guard and fan. Modifying the shaft is not required. Contact factory for installation and specify blue or green paint colour. Other voltages are also available. or use with 150, 160 & 170 Series Cast Iron TC Motors only. Blower Motor NMA Catalogue List Disc. Wgt. Voltage Phase rame Number Price Sym. CM (lbs.) T $670 A T A T A T A T A T A T A T A / T C / T C / T C or 444T/445T motors or use with Steel rame TC Motors only. Blower Motor NMA Catalogue List Disc. Wgt. Voltage Phase rame Number Price Sym. CM (lbs.) /140T A56/145 $604 A T A180* 670 A NCODR KITS These kits include the parts and encoder for field assembly of slim-line, through-shaft encoder designed to slip over the motor s fan end shaft. Blower kit sold separately. Output is 1024 pulses per revolution, quadrature, 5 to 28 VDC line driver output. Shortcircuit protection is standard. Inputs are over voltage and reverse voltage protected. lectrical noise immunity exceeds international standards. ncoders are isolated from shaft currents using hard anodized sleeves and non metallic anti-rotation hardware. Designed for long-life in industrial environments using an all-metal, shock resistant code disk. The encoder is protected by the motor s fan cover after mounting. Using a blower fan kit is suggested for proper motor cooling. OR CAST IRON 150, 160 & 170 SRIS TC MOTORS or NMA ncoder Kit List Disc. rame Catalogue Number Price Sym T $1487 A 213-5T A 254-6T A 284-6T A OR ROLLD STL MOTORS or NMA ncoder Kit List Disc. rame Catalogue Number Price Sym. 56/145T $750 A 182-4T A 213-5T A Catalogue numbers in blue are NW items. 87

4 MOTOR ACCSSORIS BLOWR AN KITS NCODR KITS TRMINAL BLOCK KITS Terminal block kits for 150 and 170 Series Cast Iron motors. Designed for easy installation kit includes mounting bracket, terminal block, studs and mounting hardware. or use with 150 & 170 Series Cast Iron TC Motors only. NMA IC Catalogue List Disc. Wgt. rame 63/90L $12 A 1 180/210T 100/112/ C 2 250/280T 160/ C 3 320/360T 200/ C 4 400/440T 250/ C 5 DI CAST ALUMINUM CONDUIT BOX CONVRSION KIT 56/140-frame kit (pictured) includes die cast aluminum conduit box, cover, gaskets, grounding screw, mounting hardware and adapter plate for mounting box on existing holes in motor. 180 and 210-frame kits include all parts required to replace the conduit box including the die cast conduit box, plug, cover, gaskets and mounting hardware. No adapter plate is required because these kits mount on existing holes. All conduit boxes have 1/2-NPT tapped lead exit holes on two adjacent sides with one hole plugged. Note: the kit will not work with larger HP single-phase 210-frame motors. NMA Catalogue List Disc. Wgt T $35 A T A T C 11 XPLOSION-PROO CONDUIT BOX UL and CSA listed for Class I, Group C & D, and Class II, Groups, & G locations. Has grounding screw and all hardware provided. Mounts to motor by 3/4"-14NPT opening at rear of box. or NMA 56 & 143-5T frame motors only. Catalogue List Disc. Wgt. Number Price Sym. (lbs.) $68 A * 68 A 2 *or use with motors having a date code ending in the letter P. LSON BRAKKITS S PAG 40 Kit of components to convert 56 through 256T frame stock TC motors to fail-safe brakemotors. Kit mounts on fan end of motor. Kits for T steel frame motors include totally enclosed Stearns AC brake, replacement cast fan cover, shaft extension, fan and hardware. Kits for 213T-256T cast iron frame motors do not include brake, but are designed for Stearns 87,000 series brake. COUPLINGS S PAG 92 These competitively interchangeable couplings feature a fail-safe jaw design - if the insert element wears/breaks away, the coupling continues to operate until the insert can be conveniently replaced. Installation is easy and allows for a degree of misalignment. our insert materials are available for a full range of environments and capabilities. 88

5 MOTOR ACCSSORIS SLID BASS TRANSITION BASS ADJUSTABL MOTOR BASS NMA T RAMS Heavy gauge steel mounting bases simplify the reinforcing channels on larger units and continuous welding installation of motors and make the tensioning, maintenance on all units give these bases strength and durability for a and replacement of belts a simple efficient task. abricated long life. A single (215T frame and smaller) or double (NMA from sheet or steel plate, then primed and finished in a gray 254T frame and larger) zinc plated adjusting screw is rust and corrosion resistant oven-baked finish. Gussets and provided. Motor mounting bolts are included. XC XC BT BT AM BB AM BB D BOLT AL AY BOLT AU DIA. AX AT D BOLT AL AY BOLT AU DIA. AX AT NMA 48 thru 215T (-00) NMA 213T thru 447T (-02) Catalogue List Disc. D* AY Wgt. rame Number Price Sym. AL AM AX BB AU** BT AT XC Bolt Bolt (lbs.) $29 A x1 3 8x T A x1 3 8x T A x1 3 8x T A x x T A x x T A x x T A x x T A x x T A x x T A x x T A x x T A x x T A x x T A x2 5 8x T A x2 5 8x T A x x T A x x T A x x T A x x T A x3 3 4x T A x3 3 4x T A x3 3 4x T A x3 3 4x T A x x14 89 NOT: These bases are not suitable for vertical mounting. All dimensions in inches. * Motor mounting bolts diameter and length, four supplied with each base. ** Base mounting bolts, four required not supplied with base. + Also available with double adjustment TRANSITION BASS Transition bases compensate for the difference in mounting dimensions and shaft height of a rigid base NMA T frame to the next higher NMA U frame. This makes it possible, for example, to replace a 10 HP NMA 254U frame motor with a 10 HP NMA 215T frame motor without modifying the basic installation. Made of the same high-quality materials Other base types and arrangements are available - please contact LSON. and construction as the adjustable motor bases above. They are for horizontal mountings, shimming may be needed for direct coupled loads. Thread size listed is for mounting transition base to the T frame motor. Dimensions listed are for one piece two are supplied, one for each side of the motor s foot. Converts To U Catalogue List Disc. Wgt. Height Width Length T rame Number Number Price Sym. (lbs.) (in.) (in.) (in.) Thread 143T/145T 182/ $23 A T/184T 213/ A T/215T 254U/256U A T/256T 284U/286U A T286T 324U/326U A T/326T 364U/365U A T/365T 404U/405U A T/405T 444U/445U A