Small and Medium DC Motors
|
|
|
- Lenard Randall Fields
- 5 years ago
- Views:
Transcription
1 Small and Medium DC Motors Inverter Duty AC Motors RPM AC Inverter Duty RPM III Medium DC Motors General Information Introduction M-283
2 Introduction General Information RPM III Medium DC Motors Inverter Duty AC Motors RPM XL SMALL DC MOTORS INTRODUCTION After more than ninety years of DC motor design experience in the variable speed marketplace, Reliance Electric continues its leadership position in DC motor technology with the RPM XL - a small DC product line STANDARD FEATURES TEFC enclosure: Permanent magnet totally enclosed fan cooled designs have been optimized for power matched performance. Cooler operating temperatures than TENV result in longer motor life and provide constant torque over a 20:1 speed range with a free wheeling diode. NEMA 56 C-Face mounting is standard on stock ratings. Tach provisions easily obtained from stock kits with C- face fan covers. (Not available on explosion proof) Class F non-hygroscopic insulation system is standard for long motor life New cartridge brush holders with brass inserts and stainless steel springs provide easy access to brushes and assure constant pressure for long brush life. Disassembly is not required for brush inspection. RPM XL SMALL DC MOTORS 1/8-2 incorporating state-of-the-art design technology. This design results in a high quality industrial duty product with more customer value and benefits than ever before. Oversize brushes and commutator assure long brush life. Permanently lubricated double-shielded ball bearings prevent dirt entry and guard against grease loss. Washdown motors use double-sealed bearings as standard. are heavy duty rolled steel, available with or without welded base. Oversized top mounted conduit box with F1/F2 conduit connection and permanently marked leads simplify connections and installation. (F1 lead outlet standard on explosion-proof) U/L component recognition and CSA approval are standard (U/L file E and CSA file LR 40567) Metric hardware and brushes (nonexplosion-proof) Paint is Reliance Electric blue-green high grade epoxy air dry enamel with non-toxic trust inhibitors. TEFC WASHDOWN EXPLOSION-PROOF M-284
3 Product Overview Available Features Mounting C-Face Foot Mounted, C-Face Footless Type TEFC, TENV, FCXP, Washdown Field Winding Permanent Magnet, Wound Horsepower Range 1/8-2 Bearing System Permanently lubricated double shielded Double sealed (washdown) Conduit Mounting Top mounted (F1/F2) Limited warranty 18 months Inverter Duty AC Motors RPM AC Inverter Duty RPM III Medium DC Motors General Information Introduction M-285
4 Introduction General Information RPM III Medium DC Motors Inverter Duty AC Motors Totally Enclosed RPM XL Small DC 40 o C Ambient Class F IP53 Description RPM XL Small DC motors are designed for reliability and long life in all variable speed applications. Permanent magnet TEFC designs have been optimized for power matched performance. Cooler operating temperatures than TENV result in longer motor life and provide constant torque over a 20:1 speed range with a free wheeling diode Tach provisions easily obtained from stock kits with C-face fan covers. Not available on explosion-proof. Double-shielded ball bearings C-Face Foot Mounted 1/4-2 1/4 1/3 1/2 3/4 Features Heavy duty rolled steel frames Cartridge brush holders with brass inserts and stainless steel springs provide easy access to brushes and assure constant pressure for long brush life. Disassembly is NOT required for brush inspection Oversized top mounted conduit box with F1/F2 conduit connection. F1 lead outlet standard on explosion-proof PM SE56C TEFC T56S1001 $342 RMO30 Yes PM SE56C TEFC T56S RMO30 Yes /100 SG56HC TEFC T56S RMO30 Yes /100 SG56HC TEFC T56S RMO30 Yes /100 HB56HC FCXP T56H1460 1,290 RMO30 Yes PM SE56C TEFC T56S1016 1,075 RMO30 Yes PM SE56C TENV T56S RMO30 Yes 8, PM SE56C TEFC T56S RMO30 Yes PM SE56C TEFC T56S RMO30 Yes /100 SG56HC TEFC T56S RMO30 Yes /100 SG56HC TEFC T56S RMO30 Yes /100 HB56HC FCXP T56H1461 1,395 RMO30 Yes PM SE56C TEFC T56S1017 1,140 RMO30 Yes PM ME56C TENV T56S RMO30 Yes 8, PM SE56C TEFC T56S RMO30 Yes PM SE56C TEFC T56S RMO30 Yes PM ME56C TEFC T56S RMO30 Yes PM ME56C TEFC T56S RMO30 Yes PM LE56C TEFC T56S RMO30 Yes /100 SG56HC TEFC T56S RMO30 Yes /100 SG56HC TEFC T56S RMO30 Yes /100 HJ56HC FCXP T56H1462 1,675 RMO30 Yes PM LE56C TENV T56S RMO30 Yes 8, PM SF56HC TENV T56S1022 1,035 RMO30 Yes 8, PM LE56C TEFC T56S RMO30 Yes PM LE56C TEFC T56S RMO30 Yes PM SF56HC TEFC T56S RMO30 Yes /100 MG56HC TEFC T56S RMO30 Yes /100 MG56HC TEFC T56S RMO30 Yes /100 HJ56HC FCXP T56H3209 2,195 RMO30 Yes PM SF56HC TENV T56S RMO30 Yes 8, PM MF56HC TENV T56S1024 1,080 RMO30 Yes 8, M-286
5 C-Face Footless 1/4-1 Totally Enclosed RPM XL Small DC C-Face Foot Mounted 1/4-2 con t PM MF56HC TEFC T56S1011 $599 RMO30 Yes PM MF56HC TEFC T56S RMO30 Yes PM SF56HC TEFC T56S RMO30 Yes PM SF56HC TEFC T56S RMO30 Yes PM MF56HC TEFC T56S RMO30 Yes PM MF56HC TEFC T56S RMO30 Yes /200 LG56HC TEFC T56S1104 1,010 RMO30 Yes /200 LG56HC TEFC T56S2104 1,089 RMO30 Yes /200 HE56HC FCXP T56H1464 2,260 RMO30 Yes PM LF56HCZ TENV T56S RMO30 Yes 8, PM LF56HCZ TENV T56S1026 1,080 RMO30 Yes 8, PM LF56HCZ TEFC T56S1014 1,137 RMO30 Yes PM LF56HCZ TEFC T56S2014 1,399 RMO30 Yes PM LF56HCZ TEFC T56S1015 1,357 RMO30 Yes PM LF56HCZ TEFC T56S2015 1,655 RMO30 Yes / PM SE56C TEFC T56S1000 $342 RMO30 Yes PM SE56C TEFC T56S RMO30 Yes / PM SE56C TEFC T56S RMO30 Yes PM SE56C TEFC T56S RMO30 Yes PM ME56C TEFC T56S RMO30 Yes PM ME56C TEFC T56S RMO30 Yes / PM LE56C TEFC T56S RMO30 Yes PM LE56C TEFC T56S RMO30 Yes PM SE56C TEFC T56S RMO30 Yes PM LE56C TEFC T56S RMO30 Yes / PM LE56C TEFC T56S RMO30 Yes PM SF56C TEFC T56S RMO30 Yes PM SF56C TEFC T56S RMO30 Yes PM MF56C TEFC T56S RMO30 Yes PM MF56C TEFC T56S RMO30 Yes PM MF56C TEFC T56S RMO30 Yes PM SF56C TEFC T56S RMO30 Yes PM LF56CZ TEFC T56S1032 1,137 RMO30 Yes PM LF56CZ TEFC T56S1033 1,357 RMO30 Yes Note: For the current version of dimension sheets, connection diagrams, design curves, etc., visit Inverter Duty AC Motors RPM AC Inverter Duty RPM III Medium DC Motors General Information Introduction M-287
6 Introduction General Information RPM III Medium DC Motors Inverter Duty AC Motors Totally Enclosed RPM XL Small Permanent Magnet DC Washdown 40 o C Ambient Class F IP55 Description RPM XL Small DC Washdown motors are designed for reliability in severe applications where the motor is in a wet and/ or dirty environment. 20:1 constant torque with free wheeling diode For operating from full wave single-phase rectified power (Type K) Stainless steel shaft USDA approved white epoxy paint Four drain plugs in each end C-Face Foot Mounted 1/4-2 1/4 1/3 1/2 3/ C-Face Footless 1/4-1 1/4 3/4 1 Features Double lip seals on shaft Double sealed bearings Permanent magnet fields Cast iron end shields Easy access to brushes PM SE56C TEFC T56S1700 $444 RMO32 Yes PM SE56C TEFC T56S RMO30 Yes PM SE56C TEFC T56S RMO32 Yes PM SE56C TEFC T56S RMO30 Yes PM ME56C TEFC T56S RMO32 Yes PM ME56C TEFC T56S RMO30 Yes PM LE56C TEFC T56S RMO32 Yes PM LE56C TEFC T56S RMO30 Yes PM LE56C TEFC T56S RMO32 Yes PM LE56C TEFC T56S RMO30 Yes PM SF56HC TEFC T56S RMO32 Yes PM SF56HC TEFC T56S RMO30 Yes PM MF56HC TEFC T56S RMO32 Yes PM MF56HC TEFC T56S RMO30 Yes PM MF56HC TEFC T56S RMO32 Yes PM MF56HC TEFC T56S RMO30 Yes PM LF56HCZ TEFC T56S1708 1,534 RMO32 Yes PM LF56HCZ TEFC T56S2708 1,868 RMO30 Yes PM LF56HCZ TEFC T56S1709 1,831 RMO32 Yes PM LF56HCZ TEFC T56S2709 2,204 RMO30 Yes PM SE56C TEFC T56S1710 $444 RMO32 Yes PM SE56C TEFC T56S RMO30 Yes PM LE56C TEFC T56S RMO32 Yes PM LE56C TEFC T56S RMO30 Yes PM MF56C TEFC T56S RMO32 Yes PM MF56C TEFC T56S RMO30 Yes M-288
7 Accessories RPM XL Small DC SE56 - LG56HCZ TACHOMETER MOUNTING KITS - CUSTOMER MOUNTED - TACH NOT INCLUDED Tachometer Type Ordering Discount TEFC RE-007 / RE A $150 RGKIT TEFC 5PY&RPY A 380 RGKIT TEFC BC42, BC A 380 RGKIT TEFC M45E1000 (RE045) (2) RGKIT Washdown** RE-007/RE B 206 RGKIT Washdown** 5PY, RPY B 430 RGKIT Washdown** BC42, BC B 430 RGKIT TENV M45E1000 (RE045) (2) RGKIT TACHOMETER - CUSTOMER MOUNTED - MOUNTING KITS NOT INCLUDED Tachometer Type Description Volts / 1000 RPM Ordering Discount RE-007 DC-7V $540 RGKIT RE-020 DC RGKIT RPY444 DC-50V RGKIT RPY444 DC-100V RGKIT RE-050(1)* AC-50V(56C) RGKIT RE-050(1)* AC-50V(140TC) RGKIT M45E1000 (RE045) (2) AC-45V A 350 RGKIT *Washdown Duty ** for use with Washdown Duty DC motors Only (1) Double C-Face tach. Mounting kit not required for drive end mounting. (2) M45E1000 replaces RE045 For factory mounting of tachometer provisions and/or tachs to stock DC motors, see DCFast Modification page. Inverter Duty AC Motors RPM AC Inverter Duty RPM III Medium DC Motors General Information Introduction M-289
8 Introduction General Information RPM III Medium DC Motors Inverter Duty AC Motors DCFast The DCFast program replaces the stock motor modifications program. DCFast modifications will be shipped in 4 weeks or less from the Gainesville Motor Plant. HOW TO PRICE DCFast BASIC MOTOR MODIFICATIONS 1. Determine model number and list price of the stock motor you wish to modify 2. Determine total list price for the modification you require from below 3. Multiply list price (basic + modifications) by the RMO31 (Use production quantity 5+ multiplier for any quantity) Adders Modification 56 Frame DC ALTITUDE/AMBIENT - See NAMEPLATES BALANCE inch, peak-to-peak $30 BRAKES Double C-face to C-face motor output shaft (not applicable to XP) - 3 ft. - lbs ft. - lbs ft. lbs ft. lbs 560 INSULATION - Addition of tropical, anti-fungus treatment to windings for FJ 60 LEADS - Conversion to extra length leads with standard material 20 Per Ft. NAMEPLATES - Re-nameplating or re-rating for altitude, ambient, service factor Addition of second nameplate for customer data SLINGER - Addition of rubber V-ring slinger on shaft extension 30 SPECIAL PAINT COLOR - Reliance Approved Formula 95 TACH PROVISIONS - Includes stub shaft, adapter & coupling for the following only. Not applicable to XP RE020, RE007, M45E1000 (RE045) (2) RPY444, 5PY, BC42 OR BC46 TACHOMETERS - Tachometers mounted on model number D-C motors TACHOMETERS RE007 RE020- # A M45E1000 (RE045) (2) REO50 # RPY444 5PY #R59E1050 or R59E1100 ENCODERS Hollow Shaft Type BEI HS ,2048PPR, single output. Available on TEFC & Washdown Motors only RESOLVERS R Resolver S Resolver TEST - Perform routine test and provide routine test report (per motor tested) 50 Non-shaded Areas - 2 Weeks Delivery Shaded Areas - 4 Week Delivery (2) M45E1000 replaces RE , ,500 2,455 2,741 M-290
Small and Medium DC Motors
Large AC Small and Medium DC Motors RPM III Medium DC Motors General Information RPM AC Inverter Duty Inverter Duty AC Motors For pricing information or to place orders, go to www.ptplace.com M-222 RPM
180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223
METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked
DC MOTORS NEMA FRAME SCR RATED
NEMA FRAME SCR RATED NEMA FRAME MOTORS SCR RATED High voltage permanent magnet DC motors are typically used with an SCR (thyristor) controller in applications requiring adjustable speed and constant torque
Inverter Duty AC Motors
inverter_duty_ac_motors.fm Page 225 Tuesday, December 17, 2002 3:12 PM RPM AC RPM III Medium DC Motors Index 225 Index RPM III Medium DC Motors RPM AC Inverter Duty Vector Inverter Duty Totally Enclosed
Inverter Duty and Inverter Duty - Vector Performance AC Motor Product Line
Large AC Inverter Duty and Inverter Duty - Vector Performance AC Motor Product Line Inverter Duty 1/3-2 HP, 56-140 frame sizes, Explosion Proof, Class I, Groups C & D, Class 2, Groups F & G, XT - Extra
INTEGRAL HP DC MOTORS INDEX
GENERAL INFORMATION INTEGRAL HP DC MOTORS INDEX STOCK RATINGS..............................................................M-250 GENERAL FEATURES..........................................................M-257
DC Motors. DC Motors. Gearmotors. AC / DC Controls. Accessories / Kits. Mods / Factory Options. X-Ref / Index. Tech. Information.
Motors Motors Gearmotors AC / s Accessories / Kits, explosion proof, SUB-F, washdown, IEC and low voltage motors available Permanent magnet designs PWM or SCR rated and low voltage input voltage designs
CUSTOM DC MOTORS & GEARMOTORS
& GEARMOTORS Battery-powered, 24-volt motor with close coupled hydraulic pump mounting on one end and standard NEMA 56 C face and shaft on other end. Totally enclosed fan cooled, thyristor rated, partial
CUSTOM DC MOTORS & GEARMOTORS
& GEARMOTORS Battery-powered, 24-volt motor with close coupled hydraulic pump mounting on one end and standard NEMA 56 C face and shaft on other end. Totally enclosed fan cooled, SCR rated, partial motor
Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors
Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors Applications: Blue Max motors are used in variable frequency drive applications requiring full rated torque at zero speed, utilizing Closed- or Open-Loop
56 Frame - Tachometer Mounting Kits and Tachometers RPM XL Small DC Frames SE56-LG56HCZ
Variable Speed DC Motor Accessories 56 Frame Tachometer Mounting Kits and Tachometers RPM XL Small DC Frames SE56LG56HCZ Tachometer Mounting Kits Customer Mounted Tach Not Included Enclosure Tachometer
THREE PHASE MOTORS RIGID BASE GENERAL PURPOSE Rigid Base
THREE PHASE MOTORS DRIP-PROOF RPM 60 HP Hz 1/4 1725 1725 S56 100027 $246 A 16 208-230/460 1.4 58.0 9.24 1/3 3450 48 101447 251 A 14 208-230/460 1.4 68.0 9.00 1725 48 100446 266 A 17 208-230/460 1.6 64.3
Inverter (Vector) Duty: micromax TM 1000:1 Constant Torque (TENV), 20:1 Constant Torque (TEFC) Totally Enclosed
Inverter (Vector) Duty: micromax TM 1000:1 Constant Torque (TENV), 20:1 Constant Torque (TEFC) Totally Enclosed Applications: Designed for direct replacement of PMDC or any other variable speed application
RPMAC Inverter Duty Motors Stock Model Number Cross Reference List
RPMAC Inverter Duty Motors Stock Model Cross Reference List L180 to RL210 Functional Replacement The following RL210 frames are intended to be only functional replacements of the L180 RPMAC frames, which
LEESON Your Complete Source For Quality DC Motors And More
LEESON Your Complete Source For Quality DC Motors And More Today s LEESON offers one of the industry s broadest and most accessible ranges of AC and DC commercial and industrial electric motors, gearmotors,
Powerful + Efficient + Reliable
1 THRU 50HP NEMA 140T THRU 449T HIGH EFFICIENCY ISO9001 CERTIFIED Powerful + Efficient + Reliable TEFC CAST IRON FRAMES CLASS F INSULATED 1.15 SERVICE FACTOR OVER SIZED BEARINGS LOW-LOSS ELECTRICAL GRADE
1/2 thru 50 Hp NEMA 56C thru 326T
200 Volt, TEFC, Foot Mounted Cast Iron Foot Mounted 200 & 7 Volt 1/2 thru 0 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200
Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power.
200 Volt, TEFC, Foot Mounted 1/2 thru 0 200 & 7 Volt 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power. Features:
Three Phase Modifiable NEMA Horizontal Motors Accessories and Modifications
1. Altitude Standard motors are designed for 3,300 feet altitude and 40 C ambient temperature. Atmospheric conditions at higher altitudes inhibit the motor s ability to dissipate heat, resulting in an
RPM AC INTEGRAL HP INVERTER DUTY MOTORS
RPM AC INTEGRAL INVERTER DUTY MOTORS Table of Contents Page General Information......................... 242 General Features........................... 242 Standard Motor Features Agency Listing..........................
steel standard SST DUCK components Epoxy Resin Rated Insulation System recognized stainless steel output shaft seal
Premium Efficiency Washguard Motors - Now Available! WASHGUARD MOTORS WASHGUARD MOTORS AVAILABLE IN FIVE STYLES Maximum service in critically clean or corrosive environments PREMIUM WASHGUARD ALL-STAINLESS
RPM III Medium DC Motors
5-500 HP C210ATZ-C440ATZ Frames, GK112-GS280 Frames (IEC) RPM III DC Motors combine the best features of the Reliance Electric RPM and SUPER RPM DC Motors with new advances in design and construction.
Small & Medium AC General Purpose Motors. Description
Totally Enclosed Fan Cooled Type CS 60 Hz 40 C Ambient Continuous Duty Class B.5 Service Factor Ball Bearing IP44 Designed for all general purpose industrial applications in a dusty, dirty and/or humid
QUICK REFERENCE Stock Sub-FHP Gearmotors
Parallel Shaft PZ Series QUICK REFERENCE Stock Sub-FHP P240 & P300 Series AC Single & Three Phase Single Phase 115V 12-100 In-Lbs Page 102 Single Phase 115/230V 43-391 In-Lbs Page 103 DC SCR & Low Voltage
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated
Inverter Speed Ratio Information
Inverter Speed Ratio Information Guidelines for Application of General Purpose,, Single Speed on Variable Frequency Drives Meets NEMA MG1-2006 Part 30 and Part 31 Section 4.4.2 Unless stated otherwise,
SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS
SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS SERIES 12 SUB-FHP Electrical Specifications: Both SCR (90 volt) and Low Voltage (12 volt) right angle gearmotors. the 90 volt motors are performance matched
200 & 575 Volt Motors. 200 Volt, Three Phase, TEFC, Foot Mounted. 1/2 thru 50 Hp NEMA 56C thru 326T
Farm Duty 200 Volt, TEFC, Foot Mounted 200 & 7 Volt 1/2 thru 0 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power.
NEMA AC Motor C-Face Kits for Field Conversion
Gear s NEMA AC C-Face Kits for Field Conversion Features: Complete kits with all hardware necessary for converting Baldor 56 through 445T frame rigid base motors to C-Face mounting with base. For a Baldor
DC Motors & Controls for many different applications
DC Motors & Controls for many different applications Baldor offers the widest variety of DC Motors. From 1/50 to 3000 horsepower, our rugged industrial designs may be used to power everything from a medical
Pump Motors. Information. General. Single Phase Motors. Industrial Motors. General Purpose. Severe Duty Motors
General Industrial Pump HVAC Farm Duty 8 Pump From industrial wastewater to fire suppression systems or commercial pools, Baldor Reliance pump motors provide value by increasing reliability and reducing
SHADED RATINGS ARE CAST IRON FRAMES
Gearmotors and NEMA AC C-Face Kits for Field Conversion Features: Complete kits with all hardware necessary for converting 56 through 445T frame rigid base motors to C-Face mounting with base. For a conversion,
QUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP AC Single & Three Phase DC SCR & Low Voltage Parallel Shaft PZ Series Single Phase 115V 12-100 In-Lbs Page 166 DC SCR 90 & 180V 10-100 In-Lbs 36-100 In-Lbs torque Page 156
56 FRAME & 56C FRAME FRACTIONAL MOTORS From WorldWide Electric
56 FRAME & FRAME FRACTIONAL MOTORS From WorldWide Electric Suitable For All General-Purpose Applications Motors Single-Phase and Three-Phase Pages -2 56 Motors Three-Phase Page 3 Stainless Steel / Washdown
The Best Value in Washdown Duty Motors and Drives
The Best Value in Washdown Duty Motors and Drives Long before we invested in the people, equipment and material required to produce Baldor Reliance Washdown Duty motors and drives, we invested our time
FACTORY MODIFICATION PRICING Effective Supercedes
FACTORY MODIFICATION PRICING MODIFICATION LEAD TIME 1. TWMC standard lead time for all modifications is 5-10 working days. If quicker lead time is required, please contact TWMC. Expediting fees may apply.
SECTION MOTOR REQUIREMENTS for HVAC
PART 1 GENERAL 1.1 SECTION INCLUDES A. Single-phase electric motors B. Three-phase electric motors 1.2 REFERENCES SECTION 23 05 13 MOTOR REQUIREMENTS for HVAC A. ABMA 9 - Load Ratings and Fatigue Life
IEC Frame Motors. Metric IEC Frame Motors, Three Phase, 60 Hz, 230/460 Volts thru 1.5 kw (.25 thru 2 Hp) IEC D63 thru D90L
Brake 200 & 575 Volt & Controls DC 200 Metric, 60 Hz, 230/460 Volts B3, Foot Mounted Q Dim. 0.18 thru 1.5 kw (.25 thru 2 Hp) D63 thru D90L Applications: Replacement motors for equipment made in Europe
Design Standard. Electric Motors. Detailed specifications follow. PART 1 - GENERAL
Design Standard Detailed specifications follow. PART 1 - GENERAL 1.01 SCOPE This design guidelines contained herein include the requirements of electric motors utilized for electric motor driven systems
NEMA & IEC Product Features and Benefits
NEMA & IEC Product Features and Benefits BEAUTY BENEATH THE SURFACE. Looking at a Techtop electric motor, it would be understandable if you thought it was just another NEMA or IEC squirrel-cage induction
SB380. Sept Rev. A
SB380 Sept. 2010 Rev. A Features pertaining to stock line ODP TEFC C-Face CCP Power range (stock) 1 1/2-200HP 1 1/2-200HP 1 1/2-100HP 1-50HP Frame construction (Rolled Steel) 180-210 N/A 180-210 140-210
RPM AC MOTORS MODIFICATION INDEX
RPM AC INVERTER DUTY MOTORS MODIFICATIONS INDEX RPM AC MOTORS MODIFICATION INDEX Page ADAPTER BASES OR RAILS Adapter Base................................................. B-64 Adapter Rails.................................................
Quick and Easy Voltage Flexibility for NEMA and Metric IEC Motors Motors are re-rated from stock models to 575V in as little as (1) business day
Elektrim 7V s Quick and Easy Voltage Flexibility for NEMA and Metric IEC s s are re-rated from stock models to 7V in as little as () business day Available 7V s: -0 HP NEMA Premium Performance Series s
Industrial and Commercial Duty IEC Motors
Industrial and Commercial Duty IEC Motors A Regal Brand Five product families delivering a world of opportunity LEESON Passport Series IEC Motors. There s a world of opportunity right here at home. The
SECTION COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT
SECTION 230513 - COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Single phase electric motors. B. Three phase electric motors. 1.2 REFERENCE STANDARDS A. ABMA STD 9
Products & Services EQ Series AC Drives. TEAMMaster WOUND ROTOR MOTORS WORLD SERIES SYNCHRONOUS MOTORS. EXPLOSION PROOF (Division 1, Zone 1)
630-543-7867 Products & Services EQ7 1-1000 hp Intelligent Keypad with Extensive Diagnostics Select Any of 4 Control Methods - V/ Hz - Dynamic Torque - Sensorless Vector - Closed-loop Vector Quick Setup
SUBMERSIBLE PUMPS DRAINER SUMP/EFFLUENT
SUBMERSIBLE PUMPS DRAINER SUMP/EFFLUENT LEESON Canada features products by well known manufacturer Berkeley which includes the Toran and Simer brand names. SUBMERSIBLE UTILITY PUMPS GEYSER II 1/6 HP 1/6
Electric Motors
SELECT Electric Motors To compete in today s global marketplace, you need a supplier who can provide electric motors that meet your quality, cost, and delivery requirements. That is why you rely on IDC
PRODUCT OVERVIEW. Baldor s mission is to be the best (as determined by our customers) marketers, designers and manufacturers
PRODUCT OVERVIEW Baldor s mission is to be the best (as determined by our customers) marketers, designers and manufacturers Motors General Purpose TEFC 1/12 Hp thru 600 Hp stock, to 800 Hp custom Enclosures:
WATTSAVER PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE
PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE The line of premium efficiency motors is now inverter capable. LEESON s unique IRIS voltage-spike-resistant insulation system is standard at no extra cost. motors
Motor Accessories. NEMA AC Motor C-Face Kits for Field Conversion
Gearmotors and PT Components Grinders Gearmotors Servo s Mod Express Baldor Education Workshop 396 NEMA AC C-Face Kits for Field Conversion Description Type/ NOTE: NEMA BA Dimension will be non-standard
5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA MG1 (2003) Part 31,
5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA M1 (003) Part 31, DefinitePurpose Inverter Fed Motors Inverter Shield TM
REEVES MOTO DRIVE BASIC PRICING
REEVES BASIC PRICING PARALLEL GEARING LIST PRICE X G50 HP SIZE LIST HP SIZE LIST HP SIZE LIST 050 $2,451 100 $4,560 300 $12,988 051 3,081 111 5,250 331 15,751 1/4 052 3,357 121 6,079 332 18,515 053 3,648
SUPER-MAX INDUCTION MOTOR
Compliance Certificate No.CC014A CSA Listed No. 1077944 SUPER-MAX INDUCTION MOTOR PREMIUM EFFICIENCY SERIES CSA Certified for Class I Division 2 Groups A, B, C, D T3C TOTALLY ENCLOSED FAN COOLED FRAME:
Mod Express Modification Motor Mod Express Page
Page No. Grinders Generators Servo s Education Catalog Index District Offices M1 Balance........................................................................... 324 M1A Dynamic Balance of Rotors M2
AutomationDirect AC Motors Selection Overview
AutomationDirect AC s Selection (1992), High, What does it all mean? In 1992, the U.S. Congress passed legislation requiring that general purpose Design A & B motors meet minimum efficiency requirements,
E280 DIAMETER FRAMES
E28 DIAMETER FRAMES MODEL NUMBER CODE...E28 FRAME To construct a motor listing, select the combination of features required, and put all the coded information in the proper sequence. Please account for
Gearmotors Parallel Shaft - PZ Series - DC
90 & 180 - TENV - PZ Series Price Model Frame P X XL XH 4 40 1 40 M1115002.00 496 985.620 PZ5-30A 450 90 0.46 155 3.00 3.25 9.28 7.72 S, US 40 1 40 M1125046.00 496 985.623 PZ5-30A 450 180 0.19 155 3.00
Large AC Motors. Synchronous Reluctance Kiln Duty Submersible Accessories & Kits. Large AC Motors. Modifications Large AC M-211
Synchronous Reluctance Kiln Duty Submersible Accessories & Kits Modifications Large AC M-211 large_ac_motors.fm Page 212 Monday, December 15, 2003 3:47 PM, Quickship and Modifiable 250 HP - 1500 HP 3600
Powered to Perform. Electric Motors
Powered to Perform Electric Motors Built and Tested to Deliver Trans-Power brand motors use tested, proven designs to keep running strong day after day. They also include features that translate into reliability
MAX-E1 HIGH EFFICIENCY. Severe Duty
MAX-E1 HIGH EFFICIENCY Severe Duty DESIGN FEATURES & CONSTRUCTION ALL MAX-E1 MOTORS DELIVER THESE IMPRESSIVE DESIGN FEATURES HPE - High Pulse Endurance Wire Non-hygroscopic, Class F insulation system High-grade,
General purpose aluminum frame motors. The right choice for efficiency and performance. SIMOTICS NEMA Low Voltage Motors.
General purpose aluminum frame motors The right choice for efficiency and performance SIMOTICS NEMA Low Voltage Motors www.usa.siemens.com/motors Siemens GP100A Aluminum Frame Motors Precision construction,
Horizontal Motors Conversions & Accessories Descriptions & Adders
Horizontal Motors Conversions & Accessories VERTICAL All Cast Iron Construction Cast Iron Conduit Box Adder: - 153 161 193 209 234 242 346 483 636 - - - Replacement of steel conduit box with cast iron
Baldor Mod Express Modification Motor Mod Express Page
Page No. ATEX M1 Balance... 396 M1A Dynamic Balance of Rotors M2 Bearings... 396 M2A Sealed or Double Shielded M2B Ball to Roller M2C Bearing Thermocouples M2D Bearing RTD S M2E Add Double Sealed Bearings
Full Load Amps Model Number List 1.52/ / / / / /1.3 4/2 3.6/1.8 4/2 4.4/ / / /2.8 2.
Variable Speed & : VAC, Hz Input Ratings (V/Hz Mode) & Enclosures (V/Hz Mode) Enclosures (Frames 2-445T) (V/Hz Mode) Enclosures (Frames 447-449T) Variable (V/Hz Mode) & Enclosures PowerMatch With All Reliance
General Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
INDEX NEMA PREMIUM EFFICIENCY
INDEX S EED EXC DS R TS O DAR MEE E STAN CE THREE-PHASE MOTORS - FEATURES & LIST PRICES THREE-PHASE MOTORS TEFC - Foot-Mount................... A-51 A-54 TEFC C-Flange........................ A-55 ODP
NORDIC-PREMIUM EFFICIENCY
CANADIAN STANDARDS ASSOCIAT ION EEV NORDIC-PREMIUM EICIENCY CAST IRON PREMIUM EICIENCY ELECTRIC MOTORS VD COMPATIBLE Meets or exceeds NeMA MG-1 table 1-1 premium efficiency corona & spike resistant MAGNet
1/50 thru 1/4 Hp. Catalog Number. Applications: Conveyors, mixers, packaging machinery. Enclosure
Subfractional Permanent Magnet DC Motor - TENV, Rigid Base 1/50 thru 1/4 Hp DC & Controls Applications: General purpose including conveyors, material handling equipment and packaging machinery. HVAC Features:
Applications: General purpose industrial use with permanent magnet or shunt wound DC motors. Description
NEMA 1 Enclosed DC Controls for PMDC and Shunt Wound DC & Controls 1/100 thru 2 Hp 115/230 VAC Single Phase 50/60 Hz. Applications: General purpose industrial use with permanent magnet or shunt wound DC
The Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
A. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents.
PART 1: GENERAL 1.01 This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to apply the
Over 525 Stock Motor Ratings. The Right Pump Motor for your Application. Leadership in Premium Efficiency. 1
Baldor Pump Motors Baldor Reliance is the leading supplier of Pump Motors to meet industrial and commercial applications. From industrial waste water to commercial pool pump motors Baldor Reliance pump
Definite Purpose Motors. Three Phase, Two Speed, TEFC, Foot Mounted. 3/4 thru 25 Hp NEMA 56 thru 324T
Unit Handling Brake 200 & 575 Volt IEC & Controls DC 158 Two Speed, TEFC, Cast Iron 3/4 thru 25 56 thru 324T Applications: Fans, blowers, machine tools, hoists, conveyors, pumps. Features: Designed for
DC Motors & Controls. Subfractional Permanent Magnet DC Motor - TENV, Rigid Base. SCR Drive Permanent Magnet Motor - TENV and TEFC, C-Face with Base
Subfractional Permanent Magnet DC Motor - TENV, Rigid Base 1/50 thru 1/4 DC & Controls Applications: General purpose including conveyors, material handling equipment and packaging machinery. Features:
QUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP Right-Angle Worm Type 10 & 13 Series AC Single & Three Phase Single Phase 115/230V 14-113 In-Lbs Page 155 DC SCR & Low Voltage DC SCR 90 & 180V 5-135 In-Lbs Low Voltage (12V)
Blue Chip Severe Duty / Cooling Tower: Single Speed EPAct Efficiency
Blue Chip Severe Duty / Cooling Tower: Single Speed EPAct Efficiency Rigid Base, Three Phase IP55 Features: Blue Chip quality, 100% cast iron construction for rigidity and reduced vibration Internal and
W21 HIGH EFFICIENCY GENERAL PURPOSE MOTORS
W21 HIGH EFFICIENCY MOTORS!"#$&'#(&)*"&+,-&"./&0,,12#3&4,.5&!"00&678997:;?@&ABCD7=EF=G Data subject to change without notice. PDF processed with CutePDF evaluation edition www.cutepdf.com :7BD ROLLED
A. Fan motors and associated equipment shall be sized to operate at 110% of calculated loads and capacities.
PART 1: GENERAL 1.01 This design guidelines contained herein includes the requirements electric motors utilized for electric motor driven systems at Texas State University. It is the intention of this
Stock Product Quick Reference Guide
Stock Product Quick Reference Guide A Regal Brand Thousands of solutions. One matched perfectly to your needs. More than 6,000 stock motors, gearmotors, gear reducers and control designs available. Yes,
Stearns Super-Mod Totally-Enclosed Non-Ventilated (TENV) Modules Featuring
TENV/IP54 Super-Mod Clutch-Brake Modules Imagine a totally-enclosed, nonventilated clutch-brake ready to work right out of the box, requiring no modifications. And at a price competitive with open enclosure
SPECIFICATIONS - DETAILED PROVISIONS Section Vertical Hollowshaft Electric Motors C O N T E N T S
Revised 04/14/2016 SPECIFICATIONS - DETAILED PROVISIONS Section 16151 - Vertical Hollowshaft Electric Motors C O N T E N T S PART 1 - GENERAL... 1 1.01 SCOPE... 1 1.02 SPECIFIC PROJECT REQUIREMENTS...
More Than Just a Motor Company
More Than Just a Motor Company RIGHT-ANGLE AND PARALLEL SHAFT AC & DC GEARMOTORS FRACTIONAL AND SUB-FRACTIONAL HORSEPOWER Bulletin 1830 GEARMOTORS Your First Source for Off-The-Shelf or Custom Gearmotors
MTE AC Line / Load Reactors Price book
Table of Contents TABLE OF CONTENTS...1 STANDARD DELIVERY SCHEDULE...2 REACTOR SELECTION & PRICING...4 208-240 VOLT (3-PHASE)...4 400 VOLT (50 HZ) USE FOR 380-415 VOLTS...5 480 VOLT (3-PHASE) REACTOR...6
1/3 thru 2 Hp NEMA 56J. Aprx. Wt. (lb) Mult. Sym. C Dim. Foot Mounted. Footless
General Super-E Jet Pump,, TEFC Pump 1/ thru 2 6J Applications: Residential and industrial pumps, swimming pool pumps, etc. Features: Diecast aluminum end plates with machined steel bearing seat insert.
Applications: Conveyors, machine tools and other applications requiring adjustable speed. Mult. Sym.
HVAC Farm Duty Fractional Horsepower DC Speed Controls for PMDC DC & Controls 1/15 thru 1/4 115 VAC Single Phase 50/60 Hz. Applications: Conveyors, machine tools and other applications requiring adjustable
DC Motors & Controls. Subfractional Permanent Magnet DC Motor - TENV, Rigid Base. SCR Drive Permanent Magnet Motor - TENV and TEFC, C-Face with Base
Subfractional Permanent Magnet DC Motor - TENV, Rigid Base 1/50 thru 1/4 Hp DC & Controls Applications: General purpose including conveyors, material handling equipment and packaging machinery. HVAC Features:
W22 Medium Voltage Motors TEFC - Severe Duty
101 www.pamensky.com W22 Medium Voltage Motors TEFC - Severe Duty Standard Features Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 1200V, 2300V, 2400V, 3300V, 4000V, 4160V & 6600V Totally Enclosed Fan
Introduction to Armature Actuated Brakes (AAB) Operating Principle. Engaged Condition (power off) Disengaged Condition (power on)
Introduction to Armature Actuated Brakes (AAB) The Armature Actuated Brakes are spring-set, electrically released, friction devices, which develop holding and braking torque in the absence of electrical
IEC Metric Motors DC Metric Motors Metric (IEC) Frame - SCR Rated - IP54
Motors Motors Gearmotors Metric Motors Metric Motors Metric () - SCR Rated - IP54 Application Notes: Please note that one or more of the mounting kits must be used with motors of these frame sizes. See
Super-E Premium Efficient Motors
Super-E Premium Efficient Motors Why Baldor? Customer Preference 20% 1985 50% 1990 90% 2000 94% 2003 95.5% 2007 The percentages shown reflect results of studies conducted in which Baldor was chosen as
Severe Duty / IEEE TEFC Motors SD100 IEEE841 / RGZEESDX
/ IEEE 841 - TEFC Motors Introduction The IEEE 841 motors meets or exceeds IEEE 841-2001 standards for energy efficiency, high performance, variable speed operation, rugged construction and long service
General Purpose - TEFC Motors GP10 / RGZP (Cast Iron Frame)
- TEFC Motors The GP10 and RGZP motors are ideal for both indoor and outdoor applications and in operating atmospheres that contain moisture, dust and grit. These industry workhorses are ideal for use
General purpose cast iron frame motors. The right choice for optimal durability, efficiency and performance. SIMOTICS NEMA Low Voltage Motors
General purpose cast iron frame motors The right choice for optimal durability, efficiency and performance SIMOTICS NEMA Low Voltage Motors www.usa.siemens.com/motors Siemens SIMOTICS low voltage cast
S R ATE TOO EG M R G G A
MOTORS AGGREGATE AGGREGATE MOTORS THE RIGHT PRODUCT IN THE TOUGHEST CONDITIONS For decades, aggregate operators have come to depend on Baldor products to keep their facilities operating at optimum efficiency
Premium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 92
Premium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 9 Crown Triton TM Series Premium Efficiency Motors Experience Combined with Technology yundai Induction Motors use Finite Element
EPACT ENERGY POLICY ACT OF 1992: THE SCOPE OF ELECTRIC MOTORS SUBJECT TO EFFICIENCY STANDARDS ON OCTOBER
EPACT ENERGY POLICY OF 1992: THE SCOPE OF ELECTRIC MOTORS SUBJECT TO EFFICIENCY STANDARDS ON OCTOBER 24, 1997 The Energy Policy Act of 1992 (EPAct) covering efficiency levels of general purpose industrial
B - SERIES PUMPS AND SYSTEMS
B - SERIES PUMPS AND SYSTEMS Single Stream -.00006 to 4.5 GPM (0.24 to 17,000 cc/min.) 420/440C Stainless Steel - 300 F Outer Drive Gear, PTFE Lip Seal. Please reference the BPB, BMB/C and BLB Series Data
Reliance Electric Super RPM Large Variable Speed DC Motors: HP B500-B1600 Frame RPM
Reliance Electric Super RPM Large Variable Speed DC Motors: 75-4000 HP B500-B1600 Frame 400-2400 RPM Engineered To Meet The Toughest Industrial Requirements Reliance Electric DC motor technology is the
HAIE2 -Efficiency and reliability for industry
HAIE2 -Efficiency and reliability for industry High performance with energy efficiency, this is the meaning of the new CAG electric motor. Low cost and best quality and long lifetime have been the basis