WES B WEN WESN B WE S. Specialized Machine QUICK CHANGE TAP ADAPTER. Basic 4 Models. Quick Change. Quick Change. Safety Torque.
|
|
- Robert Douglas
- 6 years ago
- Views:
Transcription
1 Basic 4 Models QUICK CHANGE TAP ADAPTER Quick Change S B N SN B S N Quick Change Safety Torque Quick Change Length Adjustment Quick Change S Safety Torque N Length Adjustment In addition to the basic 4 models, wide variety of models (extended size, enlarged size, R type for short shank tap etc.) are available. 456
2 : Quick Change Tapping chuck and tapping adapter :Simply insert tap adapter into tapping chuck. :Tapping chuck and tap adapter are connected firmly. :Push down on operation sleeve of tapping chuck while removing tap adapter. :Insert tap into bottom of tap adapter, and rotate tap manually to connect them firmly. :Tap and adapter are connected firmly. :Push down on ball bush while removing tap. Safe torque device activates to prevent breakage tap when torque more than fixed amount is applied to tap. (Use with a tapper equipped with axial compensation mechanism.) Tapping adapter and Tap S : Safety torque When using left handed tap adapter, please specify. N : Length adjustment Insert hex. wrench into bottom of tap adapter and turn to adjust tool length. Tap adapter with tool adjustment mechanism can be recommended for following conditions..tool adjustment with prestting gauge..when tap length changes due to re-grinding..when you do not want to use N/C machine tool compensation function. 457
3 S B Quick Change Tap Adapter Applications For right-hand thread only. Through hole and blind hole. Feature Quick Change Safety torque clutch actuates to prevent tap breakage when an excessive torque is applied to tap. In this case, a tapping chuck with compression device should be used together. For capable tap sizes, please refer to P chart. Code Model Tap Size Chuck size D D D L L L4 L5 kg S0B SB S40B SB SB S4B M ~ M8(M0) U/4 ~ U5/6(U/8) M ~ M(M5) U/4 ~ U7/6(U9/6) Pipe(PT,PS,PF)/8 ~ /4 M6 ~ M8 U/4 ~ U/4 M8 ~ M U/8 ~ U7/8 M6 ~ M8 U ~ U /8 7/8 ~ -/4 M ~ M48.Tap sizes in brackets are for light tapping only.. Calculate tap projection length from L dimension..tapping chuck with compression device should be used together. 4.Specify PT, PS or PF when using a pipe tap, as each of them has various safety torque value. 5.L and L6 dimensions fluctuate with tap sizes. Always take into account ±.5mm allowance. 6.Refer to P.46 for tap shank dia. and square dimension Ordering Example SB M8J Adapter size Tap size 459
4 Dimension L6 Tapping Capacity Symbol :For JIS (old) Tap For capable tap sizes, please refer to P chart. Metric Thread Tap Dimension Uuified Thread Whit-worth Thread Shank Dia. Φ :For Coarse Thread Tap :For light machining on aluminum alloy and the like SN B S B SN B S B 0 SN B S B SN B S B 40 SN B S B SN B S B L6 L6 L6 L6 L6 M NO5,NO6 4. M4 M4.5 NO M5 M5.5 NO0,NO M6 U/4 W/ U5/6 W5/ M8 M M0 M9 U/8 W/ M U7/6 W7/ M U/ W/ M4 M5 U9/6 W9/ U5/8 W5/ M M M8 U/4 W/ M M U7/8 W7/ M7 M6 U W M U /8 W / M0 7 6 M U /4 W / M M5 M4 U /8 W / M6 M Pipe Tap Dimension PT PS PF φ /8 /8 / /4 /4 /
5 Tapping Capacity ANSI Type 0 S0B N0 SN0B SB N SNB SB N SNB SB N SNB 4 S4B Chuck size 0 4 Tap size φ d Tap Shank Unit : Inch Drive # # # # / / # # # # / / / / / /8SPT /8LPT / / / / / / / / / / /4PT /8PT /PT / / / / / / /PT /4PT PT / / / / / / / ISO Type 0 S0B N0 SN0B SB N SNB SB N SNB SB N SNB 4 S4B d Chuck size Tap size Unit : Metric φ d Tap Shank Drive 0 Please contact NT USA for details. 4 M-.4.8 M.5, M.5.0 M.5, M..8.4 M4-, M-.5.5 M4.5, M M5-, M M M M M8-, M M M, M0-, M M, M M M M5-, M M M M M8-, M M M, M0-, M M, M M M M M0, M M M M, M M M M M0, M M M M0, M M M6, M M4, M M M M0, M M M6, M M4, M
6 Tapping Capacity DIN Type 0 S0B N0 SN0B SB N SNB SB N SNB SB N SNB 4 S4B Chuck size 0 4 Tap size Unit : Metric φ d Tap Shank Drive M, M5.5.7 M4, M M5, M6, M M M8, M M, M5.5.7 M M4, M M5, M6, M M M8, M M M M M, M5.5.7 M M4, M M5, M6, M M M8, M M M M M M M M, M M M M M M M M, M M7, M M, M M M, M M7, M M M, M M M9, M M45, M JIS Type 0 S0B N0 SN0B SB N SNB SB N SNB SB N SNB 4 S4B d Chuck size 0 4 Tap size Unit : Metric φ d Tap Shank Drive M 4.0. M4, M M5, M M M7, M M9, M M M 4.0. M4, M M5, M M M7, M M9, M M M M M4, M M M7, M M9, M M M M M4, M M M M M M M4, M M M M M M M4, M M6, M M M M M M4, M M6, M M M4, M M6, M M M M M M4, M M6, M M9, M M M M
7 Torque Wrench (for right thread) G type Torque Setting Code Model Adapter size (N-m) GS G G G G GE4-RD4 4,000 5 Setting Shank Setting Socket GS type GW type Oil pressure torque wrench with N-m, divisions. Code Model GS Tapsize GS-M M ~ M GS5-M 5 M ~ M48.Tap size will be inserted in " ".. head of setting shank fit into square part of torque wrench. Code Model Adapter size GW GW GW GW GW GW4 4 Fix square part of setting socket on vise, and then insert tap adapter into it for torque setting. Adjustable Pin Wrench GWA type Code Model Pin diameter Adapter size GWA GWA GWA GWA4 6 4 Rotate sled ring of tap adapter by pin wrench for torque adjustment. 465
8 Tap adapter type S B Torque setting Tap adapter type SN B Torque setting by special tool ) Fix square part of setting socket by using vise. ) Insert tap adapter into the setting socket. ) Insert the setting shank into the tap adapter. 4) Insert square part of torque wrench into head part of setting shank. 5) Check current torque. 6) When changing torque, remove horn part of ox circlip. 7) Insert adjustable pin wrench into pin hole of sled ring. 8) Rotate sled ring clockwise when increase torque or counterclockwise when decrease torque. 9) Check torque again after setting torque. 0) After setting the torque, return horn part of ox circlip to original position to fix sled ring. Torque setting without special tool ) Remove horn part of ox circlip. ) Insert adjustable pin wrench into pin hole of sled ring. ) Rotate sled ring clockwise when increase torque or counterclockwise when decrease torque. Sled ring rotation must be 45 ~ 90 4) After setting the torque, return horn part of ox circlip to original position to fix sled ring. 466
9 Guidelines for Torque Value Metric Tap Inch Tap PT Tap PS and PF Taps Tap Size Torque (N-m) Tap Size Torque (N-m) Tap Size Torque (N-m) Tap Size Torque (N-m) M.0 /8.0 /8 6.0 /8 8.0 M4. /4 8.0 /4 5.0 /4 6.0 M5.7 5/6 4.0 / /8.0 M6 6.0 /8.0 / 00.0 / 65.0 M /6.0 /4 0.0 / M8.0 / M /6 5.0 / / M0.0 5/ / /8 0.0 M 6.0 / 0.0 / 40.0 M.0 / M M /8 0.0 M8 8.0 M M 00.0 /8 0.0 M4 5.0 / M /8 5.0 M0 0.0 / 60.0 M / M6 0.0 / M / M40( 細 ) M M M M50( 細 )
Floating Holder. Radial float and angular float mechanisms compensate for misalignment between reamer and pre-drilled hole.
Specialize Applications ing Holer Specialize Relate Stub Holer Tapping Chuck Tap Aapter Aapter Enmill Chuck Straight Chuck ing Holer High precision reaming with special purpose machines an transfer lines.
More informationQuick-change adapters, positive drive inch sizes
P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description DP4010, DP4011 2-Speed Drill 13mm (1/2") L PRODUCT P 1/ 8 CONCEPT AND MAIN APPLICATIONS Models DP4010 and DP4011 have been developed as 13mm (1/2") Drill for
More informationInserting Tools for Screwdrivers
Screwdriving Technology Automation Air Motors Air Tools Inserting Tools for Screwdrivers nbits nsockets nfinders nbit holders With the longest lifetime and highest wear resistance combined with the best
More information1989 Jeep Cherokee. STEERING COLUMN' '1989 STEERING Jeep Steering Columns STEERING COLUMN STEERING Jeep Steering Columns
STEERING COLUMN 1989 STEERING Jeep Steering Columns DESCRIPTION All models use collapsible steering columns. All columns have integral ignition switch and locking device. Optional tilt wheel is available
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
More informationOPERATING INSTRUCTIONS AND SERVICE MANUAL
OPERATING INSTRUCTIONS AND SERVICE MANUAL 55NAL--270-4 55NL--724-4 55RNL-2-LS-4- COMPLETE TOOL MODEL NO. CODE NO. 55NAL--270-4 20270 55NL--724-4 220724 READ SAFETY RECOMMENDATIONS 55RNL-2-LS-4-24089 BEFORE
More informationWARNING NOTICE CAUTION ASSEMBLY INSTRUCTIONS
MODEL 284 EZ-GLIDE SYSTEM 10' HIGH CUBE VAN DRIVER SIDE ALUMINUM DROP DOWN LADDER RACK ATTENTION Read and understand all instructions and warnings before operating or using this product. WARNING This product
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationCombination Clutch/Brake Packages
Packaged CB Performance Series Clutch Products / Brakes Combination Clutch/Brake Packages CB Series clutch/brake combinations are designed for applications requiring a continuous rotational input being
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationCALL US WITH YOUR MACHINE MAKE & MODEL. WHETHER YOU NEED COOLANT THRU OR SOLID, WE WILL FIND THE RETENTION KNOB FOR YOU!
RETENTION KNOBS For CAT40, CAT50, BT0, BT40 & BT50 CAT40 Retention Knobs 5/8 Description DWG. T A L HOLE? Socket X70A 40EA / A45.440(C.8) A A.65 45.5 Y RKW40 X70A 40EA / A45.440 A A.65 45.5 N RKW40 X704A
More informationSpare part list 2015 MAB 825 Motor Drawing
MAB 825 Motor Drawing MAB 825 Motor Pos. No. Article no. Description pc 1.1.1 5013911 Armature 110V 1 1.1.2 5050061 Armature 230 V 1 1.2.1 5012551 Field coil 110 V 1 1.2.2 5011611 Field coil 230V 1 1.3.1
More informationMECHANICAL OVERLOAD CLUTCHES SECTION CONTENTS
TRIG-O-MATIC LITE MECHANICAL OVERLOAD CLUTCHES LOR SERIES SECTION CONTENTS FEATURES...8 OPERATING PRINCIPLES...8 SELECTION...9 HOW TO ORDER...9 RATINGS AND DIMENSIONS...10 MOUNTING ARRANGEMENTS...11 BUSHING
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationElectric Actuated Ball Valves 150# Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe
1/2 to 4 inch Pipe Features Direct mount ISO5211 Full Port stainless steel ball valve 2-piece ANSI Class 150 flanged body 275 PSI working pressure at 100 F (38 C) Highly visual dome style valve position
More informationSpare part list 2015 MAB 845 Motor Drawing
MAB 845 Motor Drawing MAB 845 Motor Article no. Description pc 1.1.1 5013911 Armature 110V 1 1.1.2 5050061 Armature 230V 1 1.2.1 5012551 Field coil 110V 1 1.2.2 5011611 Field coil 230V 1 1.3.1 5050051
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationSpare part list 2014 MAB 1300 Motor Drawing
MAB 1300 Motor Drawing MAB 1300 Motor Article no. Description pc 1.1.1 5013931 Armature 110V 1 1.1.2 5013921 Armature 230V 1 1.2 5011301 Ball bearing 6000 2Z 1 1.3 5013941 Seal ring 10x14x1 1 1.4 5013951
More information3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT SERIES Features Standard Port 3-way L or T flow path Four seat design allows for full pressure at any port Hand lever operator Actuator
More informationCaliper Disc Brakes. Description H-1. Technical Data and Selection Procedure H DP100 Caliper H-4. HC3 and HD3 Calipers H-7
Eaton Corporation Airflex Division 9919 Clinton Road Cleveland, Ohio 44144-1077 Caliper Disc Brakes H Phone (216) 281-2211 Fax: (216) 281-3890 Description H-1 Technical Data and Selection Procedure H-2
More informationHMV/HSV. Manual selector valve. 4-port valve CONTENTS
4-port valve Overview The / series manual selector valves are 4-port valves with a sliding valve method for the main valve. Suitable for operating cylinders of φ0 to φ0. Features Simple ease of operation
More informationSOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI
Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm 5 1430 1250 6 1230 1250 1400 1430 8 910 940 960 985 1210 10 755 740 535 620 1100 12 755 670 540 655 840 1260 16 790
More informationElectric Actuated Ball Valves 3-piece Stainless Steel, Full Port 1/4 to 3 NPT
1/4 to 3 NPT Features Direct mount ISO5211 Full Port stainless steel ball valve 3-piece swing out body designed for easy maintenance 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve
More informationPRODUCT CATALOGUE 2015
PRODUCT CATALOGUE 2015 INTRODUCTION Terms and conditions WE HAVE THE KNOWLEDGE, THE EXPERIENCE AND THE SOLUTIONS! SPV Spintec aims to be your complete supplier and partner when it comes to processing in
More informationCB Series Clutch / Brake
CB Series Clutch / Brake CB-2 CB-4 CB-5 CB-6 CB-8 CB-10 25 lb.in. 120 lb.in. 250 lb.in. 500 lb.in. 2,500 lb.in. 5,000 lb.in. (2.825 N-m) (13.56 N-m) (28.25 N-m) (56.5 N-m) (282.5 N-m) (565 N-m) Maximum
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationKTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
More informationTABLE OF CONTENTS. Cordless Drill & Driver / Cordless Hammer Drill & Driver. (Cordless Drill & Driver) (Cordless Hammer Drill & Driver)
Order Number PTD1007X51CE Cordless Drill & Driver / Cordless Hammer Drill & Driver Model No. EY7441 (Cordless Drill & Driver) Model No. EY7940 (Cordless Hammer Drill & Driver) Europe and Oceania TABLE
More informationMAINTENANCE MANUAL G15 Series
Doc. No. NDP 497M-02 MAINTENANCE MANUAL G15 Series WARNING For your own safety, be sure to read these procedures carefully before performing maintenance on this product. After reading this document, be
More informationTPS-2501,S CYLINDER/PISTON/CRANK SHAFT
TPS-2501,S CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty 001 157-01570-90 SPARK PLUG CAP ASS'Y 1 002 018-00546-21 SPARK PLUG BMR6A 1 006 001-07060-90 CYLINDER SET 1 007 994-64050-204 SCREW
More informationSTRAIGHT SHANK TOOL HOLDER CATEGORY
STRAIGHT SHANK TOOL HOLDER CATEGORY NC / ER COLLET CHUCK T-2 COLLET CHUCK [AND EXTENSION TYPE] T-3~6 ER COLLET CHUCK SYSTEM [FOR AUTOMATIC LATHE] T-7~8 ER TAPPER [FOR CNC LATHE] T-9 SBL COLLET CHUCK T-10
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationBoston Gear ORC Series
Boston Gear ORC Series Trig-O-Matic Overload Release Clutches Installation and Maintenance Instructions Doc. No. ORC Series Model S www.bostongear.com ORC SERIES TRIG-O-MATIC OVERLOAD RELEASE CLUTCHES
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More informationWYECO. Y-Type Cylinder Actuated Valve. Model WY-C08YT-S
Y-Type Cylinder Actuated Valve Model WY-C08YT-S Model WY-C08YT-F Features Compact, Light weight, High quality High flow capacity Simple design, Easy to assembly Easy to install and maintain All stainless
More informationShrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
More informationSPRING LOADED DEVICES
Spring Loaded Devices SPRING LOADED DE VICES Plungers: Plungers, Spring...38 39 Plungers, Spring, Metric... 40 41 Plungers, Shortie Spring... 42 Plungers, Shortie Spring Stainless Steel... 42 Plungers,
More informationPARTS LIST. Clarke CRD1250 Rotary Hammer Drill. Part Number:
PARTS LIST Clarke CRD1250 Rotary Hammer Drill Part Number: - 6482015 Quantity Description Part Number 1 SLIDE CLIP ASSY GRCRD62029 1 CIRCLIP GRCRD62030 1 FRONT CAP ASSY GRCRD62031 1 CON.ROD ASSY GRCRD62070
More informationElectric Actuated 3-Way Ball Valves T-Port Diverter, Stainless Steel, Full Port 1/4 to 2 NPT
T-Port Diverter, Stainless Steel, Full Port 1/4 to 2 NPT Features Full Port direct mount 316 SS ball valve Functions as a diverter valve 1000 PSI working pressure at 100 F (38 C) Visual valve position
More informationINSTRUCTION MANUAL. Series PROCUNIER SAFETY CHUCK CO. (Serial Nos. B4870 and higher. (Serial Nos. B9230 and higher
PROCUNIER SAFETY CHUCK CO. 304 Winston Creek Parkway Lakeland, Florida 33810-2866 Telephone 863-688-0071 FAX: 863-682-6233 Series 29000 (Serial Nos. B4870 and higher (Serial Nos. B9230 and higher INSTRUCTION
More informationAccessories. Standard AC Motors A-287. Standard AC Motors Introduction. Accessories
Standard AC Accessories Standard AC Introduction Induction Reversible Electromagnetic Brake Clutch & Brake Synchronous Low-Speed Watertight, Synchronous Dust-Resistant Right-Angle Gearheads Page Motor/Gearhead
More informationEvans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
More informationLOR Series Trig-O-Matic Lite Overload Release Clutch
LOR Series Trig-O-Matic Lite Overload Release Clutch P-3029-BG LOR Series Installation and Operation An Altra Industrial Motion Company Contents I. Introduction A. Operating Principle... 3 B. Torque Adjustment...
More informationEdition 4 October Air Impact Wrench Series. Parts Information. Save These Instructions
04584595 Edition 4 October 2013 Air Impact Wrench 2902 Series Parts Information Save These Instructions 2902P and 2902SB Air Impact Wrench Housing Assembly - Exploded View 18 17 16 1 32 31 30 18 21 25
More informationFastener Drive & Screwdriving
www.irwin.com Fastener & Screwdriving tools Manufactured for Strength and value industry-specific Screwdriver Bits Fastener heads are often designed for the particular needs of specific applications and
More informationRebuilding the HE-120 Redrive
Rebuilding the HE-120 Redrive Rick Cavallaro Disclaimer: I am NOT an expert mechanic. If something looks or sounds wrong in these directions, it probably is. I d be happy to receive any tips or feedback
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
PARTS LIST FOR NO. SERIES AM ANGLE TOOLS Form ZA Date 0March/F Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM).
More informationPARTS LIST. Reproduction. Not for. Models Mfg. No. Description Pico 6, SP 44cm Walk Behind, CE (2010)
PARTS LIST Models Mfg. No. Description 884142 Pico 6, SP 44cm Walk Behind, CE (2010) Manual Part No. 1739809 Revision B Rev. Date: 1/13/2011 Table Of Contents PRODUCT COMPONENTS PAGES Handle, Controls
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS SETTING TOOL FOR RIVKLE BLIND RIVET NUTS AND STUDS CONTENTS I TOOL DESCRIPTION... p 2 II ACCESSORIES... p 4 III TOOL USE... p 6 IV MAINTENANCE... p12 V TROUBLESHOTTING AND SOLUTIONS...
More informationTube Removal Tools. Tube Pulling Systems & Pumps. Tube Pulling Pumps & Accessories
Tube Removal Tools Tube Pulling Systems & Pumps Tube Pulling Systems consist of: 1. Pump Assembly - air/hydraulic or electric/hydraulic (includes hose assembly) 2. Ram Assembly - gripper or spear type
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E938 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 10 1 (E1) 80 1 15 7 8 9 16 17 18 1 2 3 19 4 20 5 12 6 13 14 13 15 21 11 10 39 40 41 42 43 44 45 46 47 31 38 32 22 33 23 34
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E942 ELECTRIC TOOL PARTS LIST SLIDE COMPOUND MITER SAW Model 2005 5 20 (E1) 1 2 3 60 61 62 63 64 19 20 21 A 65 47 48 45 49 50 51 6 17 37 46 38 44 23 24 22 25 24 A 26 27 39 28 40
More informationPacer Series Transaxle Drive Walk-Behind Mower
Parts Manual Pacer Series Transaxle Drive Walk-Behind Mower 15HP Product Mfg. No. Description 1694895 Pacer, 15HP B&S Walk-Behind 2690447 Pacer, 15HP B&S w/34" Deck 17HP Product Mfg. No. Description 5900630
More informationELECTRIC TOOL PARTS LIST
ELECTRIC TOOL PARTS LIST SLIDE COMPOUND SAW Model LIST E925 2001 9 14 (E2) - 2 - - 3 - - 4 - PARTS CODE DESCRIPTION 1 949-258 MACHINE SCREW M6X20 (10 PCS.) 6 2 998-818 TABLE INSERT 2 3 949-215 MACHINE
More informationInternational standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
Gear Pump High Performance Version GP up to 31 cm 3 (1.89 inch 3 ) p max 3 bar ( PSI) Speed from to RPM Technical Features Operating pressure 8 bar, Peak pressure 3 bar High-strength quality aluminum alloys
More informationBoston Gear LOR Series
Boston Gear LOR Series Trig-O-Matic Lite Overload Release Clutch Installation and Maintenance Instructions Doc. No. LOR Series Trig-O-Matic Lite www.bostongear.com LOR SERIES TRIG-O-MATIC LITE OVERLOAD
More informationAir-oil Systems. Air-oil Systems
2 3 r r r ff ff ff 4 5 6 7 8 9 Socket type No. of cores Finished cord OD Conductor sectional area 2 cores f6.6mm 0.75mm 2 DIN socket (equivalent to 3 cores f7mm AWG6 to 20) Socket type Cable OD Conductor
More informationConnecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationBS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
More informationGUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner
the Best of BOTH SYSTEMS The advantages of Hydraulic chucks & in one tool holder Now also available with ISO taper, MAS/BT and straight shank GUHROSync Guhring - your world-wide partner GUHROSync THE EASY
More information1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
More informationBall Screw Assemblies
Ball Screw Assemblies ECO-Line The Drive & Control Company Ball Screw Assemblies Product Overview ECO-Line Ball Screw Assemblies ECO-Line Ball Screws are available from stock as complete assemblies, with
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2800, HR2810, HR2811F HR2810T, HR2811FT Rotary Hammers 28mm (1-1/8") HR2800 series models have been developed as
More informationBall Valve Bracket Kit
Installation Instructions Document No. 129-496 Ball Valve Bracket Kit Product Description The Ball Valve Bracket Kit contains the parts necessary to install an OpenAir GDE/GLB Series non-spring return
More informationCompact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe SERIES Features Industrial quality miniature actuator Industrial grade True Union ball valve Visual valve position indicator
More informationPneumatic rotary drive
Pneumatic rotary drive Modular program for mounting of quarter turn valves such as ball valves and butterfly valves NMUR and ISO 5211 interfaces Position feedback (including Ex-Versions) Type 2051 can
More informationH1600 Mechanical Overload Clutches HOR Series
H1600 Mechanical Overload es HOR Series Section Contents FEATURES... 36 OPERATING PRINCIPLES... 36 SELECTION... 37 HOW TO ORER... 37 RATINGS AN IMENSIONS... 38 MOUNTING HOLE PATTERNS... 42 GENERAL INFORMATION...
More informationARM1000/2000. Standard Specifications
.5- Regulator Manifold ARM000/000 4 connection methods Standard Specifications Fluid Proof pressure Max. operating pressure Set pressure range Ambient and fluid temperature Cracking pressure (Valve) Construction
More informationREAR SUSPENSION GROUP CONTENTS GENERAL DESCRIPTION TRAILING ARM REAR SUSPENSION DIAGNOSIS TOE CONTROL ARM...
34-1 GROUP 34 CONTENTS GENERAL DESCRIPTION 34-2 DIAGNOSIS 34-3 INTRODUCTION TO DIAGNOSIS 34-3 DIAGNOSTIC TROUBLESHOOTING STRATEGY 34-3 SYMPTOM CHART 34-3 SYMPTOM PROCEDURES 34-3 SPECIAL TOOLS 34-5 ON-VEHICLE
More informationPSI Series Features: Trouble-free design for long life. Simple mechanical actuation
CROSSOVER DRIVES Wrap Spring Clutches Ideal for Overrunning, Start- Stop, and Single Revolution Applications The Crossover Drives clutches are the basic form of wrap spring clutch design. For start-stop
More informationMetrics
Metrics www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620) 442-7583
More informationReplacement and Mounting Kits Frame Size 4-Series PVplus-UK
HYDRAULICS GROUP PRODUCT INFORMATION FORM Subject : Replacement and Mounting Kits Frame Size 4-Series PVplus-UK Owner Created By Date of Issue Document Issue Number Number Stefan Schindler/COR/PARKER
More informationCoA. Constant Face Drivers. Constant Face Drivers CoA
CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting
More informationMODEL D 10YB POWER TOOLS TECHNICAL DATA AND SERVICE MANUAL ANGLE DRILL D 10YB SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
MODEL D 10YB POWER TOOLS D ANGLE DRILL D 10YB TECHNICAL DATA AND SERVICE MANUAL LIST No. 0193 Jun. 2000 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT Notice for use Specifications and
More informationInternational standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
Gear Pump High Performance Version GP3 up to cm 3 (6. inch 3 ) p max 32 bar (46 PSI) Speed from 35 to 32 RPM Technical Features Operating pressure 29 bar, Peak pressure 32 bar High-strength quality aluminum
More informationHighly Styled, Low Cost Serpentine Drive. Chrysler 383, 440 and 426 HEMI
Highly Styled, Low Cost Serpentine Drive Installation Instructions Chrysler 8, 440 and 426 HEMI Kit #40720 (without Power Steering) Use 71.5" Serpentine Belt Kit #40725 (with Power Steering) Use 81.5"
More informationM Damper Mount Linkage Kit Installation. Item Description Quantity Item Description Quantity Nuts 2
FANs 268.1, 1628.3 Installation Bulletin M9000-150 Issue Date 0796 M9000-150 Damper Mount Linkage Kit Installation 21 18 19 20 2 22 17 2 4 3 2 15.5 393.7 1 17 16 15 11 13 12 8 9 10 2 5 Note: Damper mount
More informationDR Series Radial Diaphragm Valves
DR Series Radial Valves Service Instructions Valves with Plastic Actuators (1/2 through 1 inch) Valves with Aluminum Actuators (1/2 through 2 inch) Manual model Pneumatic model Manual model Pneumatic model
More informationREMOVAL TF REMOVE TRANSFER INDICATOR SWITCH (a) Remove the switches and gaskets. HINT: Indicator switch:
20 NO. 1 NO. 2 F043499 REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag
More informationLedex Rotary Solenoids Modifications and Custom Capabilities
Ledex Rotary Solenoids Modifications and Custom Capabilities Modifications and Customized Units For modifications including heavy duty return springs, drive pins, etc. please contact our application engineers
More informationSubaru 5-Speed Double Adjustable Short Throw Shifter
Subaru 5-Speed Double Adjustable Short Throw Shifter 1999+ Subaru Impreza 5-Speed 2004-2005 Subaru Forester XT 5-Speed Congratulations on your purchase of the COBB Tuning Double Adjustable Short Throw
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E493 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2006 7 3 (E1) 1 2 3 4 501 502 48 11 12 13 14 15 24 25 26 30 31 32 25 5 6 16 17 18 19 27 28 33 34 35 7 8 20 29 21 9 22 10 23 36
More informationKNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
More informationInstallation Instructions for Mobile Room Divider
Installation Instructions for Mobile Room Divider Introduction Thank you for your investment in Mason kennels. We take great pride in providing our customers with the highest quality animal enclosures,
More informationPARTS LIST. Reproduction. Not for. Mower Decks. Mfg. No. Description EZM2042, 20HP B&S w/42" Mower Deck (2009)
PARTS LIST Mower Decks Mfg. No. Description 7800490 EZM2042, 20HP B&S w/42" Mower Deck (2009) Manual Part No. Revision A Rev. Date: 11/5/2009 Table Of Contents PRODUCT COMPONENTS PAGES Frame, Body & Seat
More informationTap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
More information" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps AR Axial Port Type AR Side Port Type "AR" series variable displacement pump has been developed which the aim of even further the quientness in operation, smaller
More informationBoston Gear ORC-S Series Trig-O-Matic Overload Release Clutches
Boston Gear ORC-S Series Trig-O-Matic Overload Release Clutches Installation and Operation ORC-S Series a division of Altra Industrial Motion Contents I. Introduction A. Operating Principle.................2
More informationForm No Revision A October Compact Excavator. Attachments. Parts Manual Gehl Company All Rights Reserved.
Compact Excavator Form 9880 Revision A October 2007 Attachments Parts Manual 2007 Gehl Company All Rights Reserved. Printed in USA When ordering service parts, specify the correct part number, full description,
More informationC19 TPS mars 2003 Z063800
TPS 2501 29 mars 2003 Z063800 TPS-2501 CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty 001 157-01570-90 SPARK PLUG CAP ASS'Y 1 002 018-00546-21 SPARK PLUG BMR6A 1 006 001-07060-90 CYLINDER
More informationBALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 20-02-2015 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
More informationPneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
More informationENGINE - GLOW PLUGS. Innovation is our mission!
ENGINE - GLOW PLUGS Innovation is our mission! 1 PAGE 2 3 GLOW PLUG CONNECTOR PLIERS 268 4 5 STANDARD NUT SOCKETS FOR GLOW PLUGS 268-269 6 7 GLOW PLUG SCREWING AID 269 8 TORQUE TOOLS 270 RATCHET RING SPANNER
More informationSTEP 1 Clutch Slave Cylinder Piston Removal and Installation
STEP 1 Clutch Slave Cylinder Piston Removal and Installation This step is mandatory as the Clutch Adjustment Screw will remain bolted in place and you will not be able to remove the Primary Drive Cover
More informationISO 5211-Compliant Actuators for Swagelok Ball Valves
www.swagelok.com ISO 5211-Compliant s for Swagelok Ball s 40G, 40, 60, and 83 ; and AFS Ball s Pneumatic rack and pinion actuators s meet industry standards for interface: ISO 5211, NAMUR, and VDI/VDE
More informationGeneral Specifications
General Specifications Model RS and RN Resistance Temperature Sensor GS 06B04D01-00E GENERAL Model RS and RN Resistance Temperature Sensors (RTSs) have a platinum resistance element (Pt 100 or 50 ) in
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More information