FrENcH casement windows D11.15 HINGES
|
|
- Lindsey Bennett
- 6 years ago
- Views:
Transcription
1 D11 French casement windows HINGES Waregemstraat Zulte - Belgium - T F commercial@sobinco.com -
2 Hinges Contents 1. General Size range CHRONO visible hinges Standard hinges n and Adjustable hinges part and 3-part hinges CHRONO INVISION hinges Hinge sets Installation instructions Adjustments CHRONO INVISI hinges Hinge sets Installation instructions.13.02
3 1. General Hinges The totally clampable CHRONO system for french casement windows is available with visible hinges and with concealed hinges. The concealed hinges offer the following advantages: --The concealed hinges have the advantage that the hinges are invisible when the window is closed. --The possibility to use a narrow frame profile: aesthetic aspect and glass surface will be larger. --The cleaning of the window frames will be easier because all the corners are easily accessible. --Colour-independent, so reducing stock and increasing cost effectiveness. -- No need to remove the inner gasket to mount the hinges. A better acoustic, wind and water tightness is obtained. -- The fully concealed hinges can not be damaged or spoilt during transport, installation or other work to the building. The concealed hinges are available in two different versions: --CHRONO INVISION: fully concealed clampable hinges, which can carry vent weights up to 170 kg. -- CHRONO INVISI: fully concealed screwed hinges, which can carry vent weights up to 90 kg. All parts are made of non-corroding materials. Profile dimensions CHRONO hardware is available to suit a frame groove of 14/18 mm or a frame groove of 10/14 mm. Chrono and Chrono Invisi Chrono Invision Frame groove 14/18 mm Frame groove 10/14 mm A 14 ± ± 0.5 B 18 ± ± 0.5 Attention: the distance between frame and vent (gap D) must be at least 4 mm, but for vent weights up to 170 kg with visible CHRONO hinges this distance has to be at least 5 mm..03
4 Hinges 2. Size range French casement windows with lockcase CHRONO Size range: --Vent width: mm. --Vent height: mm. Size range for vent heights > 2400 mm (not for CHRONO SAFE): --Vent width: mm. --Vent height: mm. Vent weight: max. 170 kg. Ratio of vent width Fb / vent height Fh = max. 1,5 (< 130 kg)..... Ratio of vent width Fb / vent height Fh = max. 1 (> 130 kg). CHRONO INVISION Size range: --Vent width: mm. --Vent height: mm. Size range for vent heights > 2400 mm (not for CHRONO SAFE): --Vent width: mm. --Vent height: mm. Vent weight: max. 170 kg. Ratio of vent width Fb / vent height Fh = max. 1,5 (< 130 kg).... Ratio of vent width Fb / vent height Fh = max. 1 (> 130 kg). CHRONO INVISI Vent width: mm. Vent height: mm. Vent weight: max. 90 kg. Ratio of vent width Fb / vent height Fh = max. 1,5. French casement windows with bolts CHRONO Vent width: mm. Vent height: mm. Vent weight: max. 170 kg. Ratio of vent width Fb / vent height Fh = max. 1,5 (< 130 kg) Ratio of vent width Fb / vent height Fh = max. 1 (> 130 kg). CHRONO INVISION Vent width: mm. Vent height: mm. Vent weight: max. 170 kg. Ratio of vent width Fb / vent height Fh = max. 1,5 (< 130 kg) Ratio of vent width Fb / vent height Fh = max. 1 (> 130 kg). CHRONO INVISI Vent width: mm. Vent height: mm. Vent weight: max. 90 kg. Ratio of vent width Fb / vent height Fh = max. 1,5. Remarks Dimensions out of standard range on request!.04
5 Hinges 3. CHRONO visible hinges 3.1. Standard hinges n and General Vent width Fb = mm Vent weight < 90 kg Finish: aluminium anodised or polyester powder coated (more than 450 RAL colours) Top hinge n hinge pin bush clamping plate vent part frame part cap vent part screw vent part Bottom hinge n hinge pin bush clamping plate vent part frame part cap vent part screw vent part Preparation.05
6 Hinges 3.2. Adjustable hinges General Vent width Fb = mm Vent weight < 130 kg Vent width Fb = mm Vent weight < 170 kg >90kg and/or Fb>1400mm >90kg and/or Fb>1400mm Plate n for supporting adjusting screw (order separately) Plate n for supporting adjusting screw (order separately) remove Top hinge n vent part clamping plate vent part screw vent part hinge pin frame part Bottom hinge n hinge pin adjustment bearing piece cap vent part screw vent part clamping plate vent part frame part Reinforcement set n (>90kg and/or Fb>1400mm) reinforcement piece screw Hinge wedge n Top hinge n vent part clamping plate vent part screw vent part hinge pin frame part Bottom hinge n hinge pin adjustment bearing piece cap vent part screw vent part clamping plate vent part frame part Reinforcement set n (>90kg and/or Fb>1400mm) reinforcement piece screw Reinforcement set n (>130kg) screw supporting piece adjustment bearing piece Hinge wedge n
7 Hinges Preparation Preparation hinges Preparation reinforcement set For windows with vent weight between 90 kg and 130 kg and when Fb > 1400 mm the reinforcement set n must be used to reinforce the adjustable top hinge. The M4x10 thread forming screws must fix into at least 6 mm of aluminium. Drilling jig n is available for drilling the holes part and 3-part hinges and Vent width Fb = mm Vent weight < 75 kg and Vent width Fb = mm Vent weight < 80 kg Order number G Fh = max. 1200mm 2 hinges Fh = mm 3 hinges Fh = mm 4 hinges Finish: aluminium anodised or polyester powder coated (more than 450 RAL colours).07
8 Hinges 4. CHRONO INVISION hinges 4.1. Hinge sets Hinge set for frame groove 14/18 mm Hinge set for frame groove 10/14 mm Right hand = illustrated Left hand = opposite view Right hand = illustrated Left hand = opposite view Hinge set n R(L) R(L) top hinge R(L) bottom hinge Reinforcement set n (>130kg and/or Fb>1400mm) reinforcement piece 1 St3.5x13Din7504P screw Hinge wedge n Hinge set n R(L) R(L) top hinge R(L) bottom hinge Reinforcement set n (>130kg and/or Fb>1400mm) reinforcement piece stop Hinge wedge n For weights > 130 kg the reinforcement set n (for frame groove 14/18 mm) or (for frame groove 10/14 mm) should be placed. Windows with a vent height Fh > 1200 mm require an additional hinge wedge n at the hinge side. Windows with a vent height Fh > 1800 mm, require two additional hinge wedges n at the hinge side..08
9 Hinges 4.2. Installation instructions Fixing vent part of bottom hinge Fb > 1400mm and/or Fg > 130kg Positioning and fixing top hinge on the vent n 4 Remove retaining piece Remove positioning clips after assemby Fixing frame part of the bottom hinge on the frame profile Assembly of vent and frame Press right into corner n 2.5 n 2.5 Fixing top hinge (vent) on frame profile Fixing top hinge n 2.5 Frame groove 14/18 mm Frame groove 10/14 mm n 2.5 Press right into corner n 2.5 Fixing of the drilling screw (reinforcement set 170 kg) Fixing of the stop (reinforcement set 170 kg) Installation of the reinforcement plate Fg > 130 kg and frame groove 14/18 mm Fg > 130 kg and frame groove 10/14 mm Vent weight > 130 kg.09
10 Hinges 4.3. Adjustments Overview adjustments Bottom hinge -- Continuous horizontal and vertical adjustment range of ±1.5 mm. -- Adjustable without releasing fixing screws and without removing the vent. --Adjustable friction device for turn mode. Top hinge -- Continuous horizontal adjustment range of +3 mm/-3 mm. Opening angle -- The maximum opening angle is adjustable on the bottom hinge (90 or 105 ). Adjustment top hinge Adjustment vent part of bottom hinge Right Left INSIDE INSIDE.10
11 Hinges Adjustment frame part of the bottom hinge Adjustment of the friction mechanism Adjustment of the opening angle (90 to 105 ) before mounting the hinge.11
12 Hinges 5. CHRONO INVISI hinges 5.1. Hinge sets Hinge set for frame groove 14/18 mm Hinge set for frame groove 10/14 mm Hinge set n L(R) + 4 x positioning piece n positioning piece + Screw set n St3.9x16DIN7982 screw Hinge set n L(R) + Screw set n St3.9x16DIN7982 screw Hinge wedge n Hinge wedge n For vent weights > 130 kg, the reinforcement set n must be placed (for frame groove 14/18 mm) or (for frame groove 10/14 mm). Windows with a vent height Fh > 1200 mm require an additional hinge wedge n at the hinge side. Windows with a vent height Fh > 1800 mm require two additional hinge wedges n at the hinge side. The screws for the hinges must be ordered separately..12
13 Hinges 5.2. Installation instructions Drilling: - ø3.2 mm if not in the corner cleat of the sections open out the hole to ø3.5 mm when in the corner cleat of the sections. Drilling in frame section for top and bottom hinge Fixing of frame part of bottom hinge Move pin for the correct frame groove drill ø3.2 ANLAGE = end position Mark to the inside INNEN = inside Attention: clips n only for frame groove 14/18 mm Drilling in vent section for vent part of bottom hinge Fixing vent part of bottom hinge drill ø3.2 drill ø3.2 Fixing top hinge on vent section Mark to the inside Positioning Attention: clips n only for frame groove 14/18 mm.13
14 Hinges Assembly of vent and frame Fixing top hinge on frame... section (window upside down) Fixing bottom hinge Hinge is loose Hinge is fixed The cam is turned to the indicated position..14
G11.11 INVISITOP FOR BOTTOM HUNG WINDOWS
G11 FAN LIGHT WINDOWS G11.11 50141 FOR BOTTOM HUNG WINDOWS 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationC.9.CHRONO INVISI TILT AND TURN
C.9. Contents General characteristics... Base set (standard) n 31117, 31118 and 31119... Selection of rods n 30000-...... Installation instructions... Base set PLUS n 31517, 31518 and 31519 Installation
More informationC12.11 SALTO 4208 C12 SIDE HUNG WINDOWS
C12 SIDE HUNG WINDOWS C12.11 01.07.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More informationB12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS
B12 TILT-TURN WINDOWS B12.13 SALTO 4138 FOR SLOPING HEAD WINDOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationA12.11 SALTO 4008 A12 TURN-TILT WINDOWS
A12 TURN-TILT WINDOWS A12.11 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More informationC13.10 CHRONO LOCKCASE AND PERIMETER LOCKING SET C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS CHRONO LOCKCASE AND PERIMETER LOCKING SET 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationB.1.CHRONO SIDE HUNG OPEN IN WINDOWS
B.1. SIDE HUNG OPEN IN Contents General characteristics................... page B.1.2 Base set n 20110...................... B.1.4 Centre locking sets n 30140-800 and 20140-35..........................
More informationC.4.CHRONO TILT AND TURN
C.4. Contents General characteristics................... Base set n 31111, 31112 and 31113...... Centre locking set n 30140-30........... Selection of rods n 30000-................ page C.4.2 C.4.5 C.4.6
More informationTURN-TiLT WiNDOWs A11.16 CHRONO ACCessORies
A11 TURN-TILT WINDOWS A11.16 CHRONO Accessories 01.02.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. Window stay
More informationC14.12 WINDOW STAYS C14 SIDE HUNG WINDOWS
C14 SIDE HUNG WINDOWS 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Window stays series 681-.. and n 684-12....03
More informationC.3 CHRONO MISCELLANEOUS. Contents. turn-tilt- and tilt-turn window
C.3 Turn-tilt and tilt-turn windows CHRONO MISCELLANEOUS Contents 1. Night vent device n 30140-861 C.3.02 1.1. General C.3.02 1.2. Profile dimensions C.3.02 1.3. Operation C.3.03 1.4. Air flow C.3.03 1.5.
More informationA.10 CHRONO FOR PIVOTING WINDOWS. Contents. Horizontal and vertical pivoting windows
A.10 Hizontal and vertical pivoting windows CHRONO 10040 FOR PIVOTING WINDOWS Contents 1. General characteristics A.10.02 2. Base set n 10040 A.10.03 3. Centre locking set n 30140-800 A.10.04 4. Selection
More informationRC2 E11.09 CHRONO SAFE (RC2) E11 BOTTOM HUNG OPEN IN WINDOWS
E11 BOTTOM HUNG OPEN IN WINDOWS RC2 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...03
More informationRC2 B11.09 CHRONO SAFE (RC2) B11 TILT-TURN WINDOWS
B11 TILT-TURN WINDOWS RC2 B11.09 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
More informationH13.11 HANDLES H13 HORIZONTAL AND VERTICAL PIVOT WINDOWS
H13 HORIZONTL N VERTIL PIVOT WINOWS 01.11.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - coercial@sobinco.com - www.sobinco.com ONTENTS 1. General information....03
More informationK17.13 DOOR STAYS K17 DOORS
K17 DOORS K17.13 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door stays n 684(C)-500...K17.13.03 1.1.
More informationSingle locks series k
k12 Doors K12.13 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. Door locks series 8000... K12.13.03 1.1.
More informationA.15 HANDLES FOR PERIMETER LOCKING SETS. Contents. Horizontal and vertical pivoting windows
.15 Horizontal and vertical pivoting windows HNLES FOR PERIMETER LOKING SETS ontents 1. General information.15.02 1.1. Handles series 501, 502 and 503.15.02 1.2. Handles series 5010, 5020 and 5030.15.02
More informationF11.13 FRICTION HINGES F11 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS
F11 AND TOP HUNG WINDOWS F11.13 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General information...f11.13.03
More informationK16.14 STAINLESS STEEL DOOR PULLS
K16 DOORS K16.14 01.06.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K16.14.03 1.1. General information
More informationTHE NEW HARDWARE SYSTEM ALU 540. Roto ALU 540. FB 44-0 GB July 2005 Alu B.U./J.S. (Translation: Prunty 9/05)
THE NEW HARDWARE SYSTEM ALU 540 1 APPLICATION RANGE Hinge-side compatible with all conventional Euro-chamber profiles Clampable hinge-side with preassembled clamp-strips Available for all standard opening
More informationPatio doors max. Sash width (mm) 365 to Sash height (mm) 550 to Sash weight (kg) max. 100/130 max. 100/130
ALU 5200-D (130 kg) Turn only hardware for hinge clearance (BD) 5 mm BD 5 Size range It is essential to adhere to the details of the system provider. Windows min. max. Patio doors max. Sash width (mm)
More informationIncorporating V2.0. Product spec >>> > Series NV - Non vision grilles
Incorporating V2.0 Product spec >>> > Series NV - Non vision grilles Grilles Non-vision Recommended for: Wall & door Supply & extract Overview Block line of sight into private areas Giving adequate ventilation
More informationPatio doors max. Sash width (mm) 600 to Sash height (mm) 550 to Sash weight (kg) max. 150 max. 150
ALU 5200-D (150 kg) Turn only hardware for hinge clearance (BD) 5 mm BD 5 Size range (depends on hardware) Windows min. max. Patio doors max. Sash width (mm) 600 to 1600 1300 Sash height (mm) 550 to 2000
More informationTECHNOLOGY IN MOTION MACO MULTI-TREND TU.-ON. AND T&T FITTINGS. Installation instructions TIMBER WINDOWS
TECHNOLOGY IN MOTION TU.-ON. AND T&T FITTINGS Installation instructions TIMBER WINDOWS System designation: TO > Single routing DT > Double routing AS > Face fix fittings Note about surfaces fittings are
More informationEA patch fittings for offset hung doors in toughened glass assemblies 56. Top centres for wood and steel frames 58. Glass preparation details 60
EA General information 50 EA patch fittings for offset hung doors, 24 mm frame stop depth EA patch fittings for offset hung doors, various frame stop depths 54 EA patch fittings for offset hung doors in
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Handle controlled opening arrester Wilh. Schlechtendahl
More informationIncorporating V2.0. Product spec >>> > Series DD - Double deflection grilles
Incorporating V2.0 Product spec >>> > Series DD - Double deflection grilles Grilles Double deflection Recommended for: Wall, ceiling & duct Supply & extract Overview Enhanced functionality As per the name,
More informationIncorporating V2.1. Product spec >>> > Series ECG - Egg crate grilles
Incorporating V2.1 Product spec >>> > Series ECG - Egg crate grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract grille Plastic egg crate core optional
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Wilh. Schlechtendahl & Söhne GmbH & Co. KG
More informationALU 5200-TBT (150 kg)
ALU 5200-TBT (150 kg) FBS Tilt-and-turn hardware for hinge clearance (BD) 5 mm with mishandling device (FBS) on the corner drive (EUL) KPW BD 5 Tilt point horizontal (KPW) Size range It is essential to
More informationEA patch fittings for offset hung doors in toughened glass assemblies 56. Top centres for wood and steel frames 58. Glass preparation details 60
EA General information 50 EA patch fittings for offset hung doors, 24 mm frame stop depth EA patch fittings for offset hung doors, various frame stop depths 54 EA patch fittings for offset hung doors in
More informationMULTI ZERO locking hook for zero barrier threshold systems
TECHNOLOGY IN MOTION www.maco.eu ASSEMBLY INSTRUCTIONS MULTI ZERO locking hook for zero barrier threshold systems Only for use by certified specialists! Not for end users! TILT AND TURN HARDWARE Key Sash
More informationUw = 0.66W/m²K Uf = 0.77 W/m²K Ug = 0.50 W/m²K
Uw = 0.66W/m²K Uf = 0.77 W/m²K Ug = 0.50 W/m²K Innovation is often spoken about, but very rarely delivered. Comar 0 offers a new departure, a Passivhaus certified product with U values as low as 0.66 coupled
More informationArchitect: A.D.H. Photography: DR TECHNAL FY 65 WINDOW
Architect: A.D.H. Photography: DR TECHNAL FY 65 WINDOW Architect: Manuelle Gauterand Photography : Vincent Fillon FY 65 window, A range of different solutions Architect: W Architectures Photography: DR
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationargenta opening doors
Door and window fittings Content Table of contents Introduction... 03 Window restrictors... 04 Window handles for aluminium frames... 06 Window handles for wooden frames... 07 Window handles for PVC frames...
More informationSmart Visofold 1000 Series Bi Fold Door System
Smart Visofold 1000 Series Bi Fold Door System 1 P a g e Smart Visofold 1000 Series - Recommended Design Limitations Minimum Sash Width Maximum Sash Width Maximum Sash Height Maximum Sash Weight 700mm
More informationThe following information from the aluminium planning manual must be observed:
ALU 5200-TBT E RC 2 The anti-intruder tilt-and-turn hardware for aluminium windows and French doors. Application for testing according to EN 1627ff RC 2, RC 2 N KPW BD 3,5 BD 5 Size range It is essential
More informationRoto NT The world s biggest selling Tilt&Turn hardware system for windows and balcony doors
Window and door technology Roto NT The world s biggest selling Tilt&Turn hardware system for windows and balcony doors For aluminium profiles with 16 mm hardware groove Convincingly good windows With surprisingly
More informationISO 9001:2008
DOOR Dutch, Heavy Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the bottom
More informationArte. Possibilities. Architecture for the future. Endless. Standard Profiles Nunc Et Orci Morbi Posuere. Arte Profiles Options. Arte Window Options
Possibilities Arte Endless Architecture for the future Standard Profiles Nunc Et Orci Morbi Posuere Arte Profiles Options Page 4 Arte Window Options Arte Door Options Page 13 Page 25 Table of Contents...
More informationEos 200/40. Eos. Type A (cm) X B(cm) M 2 H1(cm) H2(cm)
Eos 200/40 Eos Color RAL 9005 RAL 6009 Polycarbon 10mm Security 4mm Mounting difficulty Type A (cm) X B(cm) M 2 H1(cm) H2(cm) ET23 314 cm x 396 cm 11,2 m 2 201 cm 260 cm 38 - - ET2E 236 cm x 73 cm 1,7
More informationFeatures EN/IEC Applications
PO Modular polyester boxes nsulated boxes Standards eatures ntro N/ 639- N/ 6059 N/ 608 pprovals - oxes with polyester cover: types 3, 3R,,, 6, 6P, and 3 - oxes with polycarbonate cover: types 3, 3R,,,
More informationWindow Locking 10YEAR. whitco.com.au
Window Locking 10YEAR whitco.com.au Contents CYL4 Push Lock CYL4 Mini Push Lock CYL4 Multi Bolt CYL4 Patio Bolt page 4 page 6 page 7 page 8 CYL4 Window Bolt CYL4 Mini Window Bolt Keyed Sash Lock Safety
More information2: Stylebox Stylebox 15 Overview B 2_ Complete Stylebox 15 Kits B 2_ Stylebox 15 Standard Kit B 2_8
2.1 Stylebox 15 Overview 2_3 2.1.1 Complete Stylebox 15 Kits 2_7 2.1.2 Stylebox 15 Standard Kit 2_8 2.2 Stylebox 15 Smart 2_10 2.2.1 Width 2_11 2.2.2 Height ezel 2_11 2.2.3 Depth 2_11 2.2.4 Top Cover Panel
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationOWAtecta. OWA metal ceilings. OWAtecta Metal ceilings
OWAtecta OWA metal ceilings OWAtecta Metal ceilings 3 OWAtecta Metal ceilings Contents Inhalt Perforations steel... 4 Perforations aluminium... Systems System S b OWAline... 7 System S 6M Tube Ceiling....
More informationTECHNOLOGY IN MOTION MACO. TU.-ON. and T&T FITTINGS. Comfort fittings
TECHNOLOGY IN MOTION MACO multi TU.-ON. and T&T FITTINGS Comfort fittings Installation INSTRUCTIONS 80 kg MACO Key Sash rebate height Sash rebate width Handle position Backset Maximum sash weight Comfort
More informationDeubl Alpha door frames
Deubl Alpha door frames 2 11/04 Deubl Alpha Door frames General information New and super narrow the perfect aluminium door frame for glass assemblies: Please note: Fittings have to be ordered separately.
More informationHS-PORTAL 300 LM Lift and slide hardware for aluminium doors Hardware information for profile manufacturers
HS-PORTAL 300 LM Lift and slide hardware for aluminium doors Hardware information for profile manufacturers... with the following benefits: with integrated night vent profile cylinder accessories secure
More informationMaterial: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated
4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt
More information0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table
Type overview FSR with guide cables or rods Type key FSR P S 0 0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table Cover panel without back-fold: S = small,
More informationRUSTIC 11.5302.58 11.5004.58 11.5018.68 11.5085.68 REF. 11.5018 96 19 58 68 11.5302 64 17 58 68 11.5004 96 19 58 68 11.5085 96 19 58 68 108 11.6362.58 11.2167.58 REF. 11.6362 96 104-33 - 58 68 11.2167
More informationSliding Door Fittings, Roller Shutters Folding Sliding Door Fittings
Silent Fold 20/A, door weight up to 20 kg Area of application: For folding doors mounted to the carcase on one side, without running and guide track, for opening and closing the folding doors without blocking
More informationHAUTAU ATRIUM Alu-HKS 200. for aluminium systems
Catalogue HAUTAU ATRIUM Alu-HKS 200 for aluminium systems HAUTAU Catalogue Tilt and Slide Fittings ATRIUM Alu-HKS 200 2017 Version 08/2017 You will find the latest catalogue version online on www.hautau.de
More informationHS-PORTAL 200 LM Lift and sliding hardware for aluminium doors Hardware information for profile manufacturer
HS-PORTAL 200 LM Lift and sliding hardware for aluminium doors Hardware information for profile manufacturer... with the following benefits: with integrated night vent profile cylinder accessories secure
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationHINGES Weld-on Hinges Steel. Weld-on Hinges Steel. MATERIAL Steel. FINISH Raw. FEATURES Brass Washer Steel Pin Grease Nipple
47 48 Weld-on Hinges 7004.00 Raw Brass Washer Pin Grease Nipple Weld-on Hinges 7010.00 Raw Brass Washer Pin 49 Weld-on Hinges 7005.00.080, 7005.00.100 Raw Brass Washer Brass Pin Grease Nipple 7005.00.080
More informationIncorporating V2.0. Product spec >>> > Series DJ - Drum jet diffusers
Incorporating V2.0 Product spec >>> > Series DJ - Drum jet diffusers Diffusers Drum jets (Premium) Recommended for: Wall, ceiling & duct Supply Overview Exceptional throw Throw completely adjustable Drum
More informationSmart Visoglide Plus Sliding Door System
Smart Visoglide Plus Sliding Door System 1 P a g e Recommended Design Limitations - Maximum Sash Weight Maximum Sash Height Minimum Sash Height Maximum Sash Width Maximum Glass Thickness U Value 200kg
More information* depending on drive configuration at constant 24/29 V DC without load
Page 1/8 - stand of 02/2016 Very powerful drive. Compact thanks to its horizontally turned guidance tube. Almost all special MEGAMAT 2 equipment can also be used with. This mix of power and diversity makes
More informationDOOR French, Heavy Duty, Individual Dog Model 1620 Features 1
DOOR French, Heavy Duty, Individual Dog Model Features 1 When wider access is needed, FREEMAN MARINE French doors perform like two single panel doors that seal to each other. The same high quality tooling
More informationSpindle drives. Spindle Drives SP
Spindle Drives SP Special Features sp For natural ventilation, smoke and heat exhausting systems Robust corrosion-resistant design Aluminium housing anodized finish with plastic end caps Easy installation
More informationWeld-on Hinges Weld-on Hinges
54 53 Weld-on Hinges 7004.00 Satin Brass Washer Pin Grease Nipple Weld-on Hinges 7004.90 Aluminium Satin Stainless Washer Stainless Pin Grease Nipple 55 Weld-on Hinges 7005.00.080, 7005.00.100 Satin Brass
More informationPatio doors max. Sash width (mm) 380 bis Sash height (mm) 550 bis Sash weight (kg) max. 100/130 max. 100/130
ALU axxent PLUS-DK Concealed turn-and-tilt hardware for frame groove with mishandling device (FBS) on the corner drive (EUL) FBS KPS Tilt point vertical (KPS) Size range It is essential to adhere to the
More informationHinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
More informationGEZE DOOR TECHNOLOGY. GEZE sliding door systems. A combination of functionality, reliability and appealing design BEWEGUNG MIT SYSTEM
GEZE DOOR TECHNOLOGY GEZE sliding door systems A combination of functionality, reliability and appealing design Over 100 years of experience in sliding door systems BEWEGUNG MIT SYSTEM Page Table of contents
More informationSliding Systems for. Glass Doors and Wooden Doors. MANTION slidingsystems. The French touch makes the difference. d ep uis
Sliding Systems for Glass oors and Wooden oors MAE IN FRANCE d ep uis 1 92 0 MANTION slidingsystems The French touch makes the difference. Content P.3 P.5 P.7 P.9 P.11 P.13 STRAIGHT SLIING OORS for glass
More information4 100 Concealed Hinge Pr02 90
4 100 oncealed Hinge Pr02 90 oor bending 20mm for nested door 90 oncealed Hinge for RH or LH application. The 2 main hinge parts have a central guide to prevent door sagging during adjustment. Material:
More informationHahn Serie 60 AT. Universal hinge for versatile application. More modern look Improved technology
Hahn Serie 60 AT Universal hinge for versatile application! More modern look Improved technology 2 4 5 6 7 8 9 2 3 4 5 6 7 8 9 2 Hahn Serie 60 AT For all doors made from metal profile sections NEW! Uniform
More informationTruth Hardware (Awning Window)
Truth Hardware (Awning Window) 20-1/2" Single Pull Lever Operator Contents: 1 operator; 1 hook and 1 set of installation screws. "Y" Dimension "Y" Finish Part No. Under 2" TH-23070 Over 2" TH-23069 Under
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationFeatures and Benefits
Features and Benefits Max door panel weight is 75kg Max overall unit height is 2700mm Max door panel width is 900mm No drilling required for flushbolts or locking systems Concealed bottom channel for improved
More informationAluminium Sliding Door System
Aluminium Sliding Door System This system focuses on modern, sharp lines which are the result of the small radii achieved in the design of the aluminium sections. It allows designers to create distinctive
More informationTECHNOLOGY IN MOTION MACO MULTI-MATIC TILT AND TURN FITTINGS. Installation instructions PVC WINDOWS
TECHNOLOGY IN MOTION TILT AND TURN FITTINGS Installation instructions PVC WINDOWS Note on the surfacefinish fittings are electrogalvanised, passivated and sealed with wax. We guarantee that the surfacefinish
More informationBERNSTEIN Aluminium Control Enclosure
BERNSTEIN Aluminium Control Enclosure Protection in its most beautiful form The new Aluminium Control Enclosure Design aspects along with modularity, functionality and ergonomics, are rapidly becoming
More information2 tilt only stays min. max. Sash width (mm) > Sash height (mm) Sash weight (kg) max. 30 kg max.
ALU axxent PLUS-K Concealed tilt-only hardware Size range It is essential to adhere to the details of the system provider. 1 tilt only stay min. max. 2 tilt only stays min. max. Sash width (mm) 400 1020
More informationAEROWINGS Sun Control Systems
AEROWINGS 200-400 wwwluxaloncom Sun Control Systems Luxalon Aerowings 200-400 System Description Luxalon wing-shaped elements, or fins, combine optimum solar effectiveness with an elegant and futuristic
More information3 Panel Horizontal Sliders C03: Centre Opener
Classic Range Product Data Sheet 3 Panel Horizontal Sliders C03: Centre Opener Panel Sliding Orientation CO3 version LH & RH Centre LH = Left Hand = Primary slider centre panel slides from left to right
More informationArchitectural LED Series
Architectural LED Series Actual product characteristics may vary. Lighting Options Australia reserves the right to improve, modify or update the product designs without prior notice. DOWNHILL DAN...18
More information19" chassis F. Downloads and further important information can be found on the Internet under Overview Cabinets...
Overview... 0 Cabinets... 1 19" chassis Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 02192001 Subracks/ 19" chassis... 6 ront panels,
More informationSLIDING DOOR AND WINDOW SYSTEM WITH THERMAL BREAK
SLIDING DOOR AND WINDOW SYSTEM WITH THERMAL BREAK Е70 WINDOW AND DOOR SYSTEM WITH THERMAL BREAK TABLE OF CONTENTS GENERAL INFORMATION page 9 BUILDING PHYSICS page 17 TABLES page 25 PROFILES page 31
More informationargenta opening doors
argenta opening doors argenta invisidoor Invisible aluminium frame for interior doors Content argenta invisidoor... 4 argenta invisidoor AX / AX PRO... 10 argenta invisidoor SD / SDX... 16 general information...
More informationAIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS
AIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS Airodyne multi leaf volume control tampers have been specifically designed for use in air conditioning and ventilation system for volume,
More informationVisual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page
NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening
More informationHelios Twin 200/25. Helios Twin. Mounting difficulty
Helios Twin 200/25 Helios Twin Bemating: zie Helios (2 x A) Dimensions: See Helios (2 x A) Dimensions: Voir Helios (2 x A) Abmessungen: Sehe Helios (2 x A) Mounting difficulty 38 Helios Multibay Greenhouses
More informationWindow Fittings Sliding/Folding Fittings
Folding window fitting Fold 35 Features For timber door frames For 2- to 6-leaf folding doors Floating suites possible Full corrosion resistant construction, ideal for coastal applications Concealed channel
More informationCommercial Body Fittings 8th Edition. Door Hinge Raised Blade Zinc Plated & Stainless Steel. Door Hinge Raised Blade Zinc Plated & Stainless Steel
HINGES Commercial Body Fittings 8th Edition Door Hinge Raised Blade & No. HNVN731/SS wgt. 0.88kg l 30G Polished stainless steel No. HNVN731/ZP wgt. 0.88kg l mild steel Door Hinge Raised Blade & 22 85 105
More informationAluminium Productive Fence System 40 PRODUCT CATALOGUE
11 2017 (e) Aluminium Productive Fence System 40 PRODUCT CATALOGUE solutions by F.EE Elektrotech Engineering Automation Robotik Informatik + Systeme Energietechnik F.EE GmbH In der Seugn 10 and 20 D-92431
More informationCONTENT. Section. Introduction. Introduction. Hinges. Gears. Corner transmissions/ Middle locks/ Extensions. Stay arms. Additional elements
塑钢窗配件 Section Introduction CONTENT Introduction 1 Hinges 2 Gears 3 Corner transmissions/ Middle locks/ Extensions 4 Stay arms 5 Additional elements 6 Hardware set combinations 7 Tools / Instalation/ Adjustments
More informationINDEX. Chapter2. air master. Grilles and Registers
Chapter2 INDEX A.Grilles and registers. 1. Supply air grille - front horizontal blades...: ASG-H...2.1 2. Supply air grille - front vertical blades...: ASG-V...2.2 3. Supply air register - front horizontal
More informationWE KEEP YOUR DOORS FUNCTIONING IN ALL CONDITIONS
PVC TECHNOLOGY IN MOTION www.maco.eu WE KEEP YOUR DOORS FUNCTIONING IN ALL CONDITIONS HINGE SYSTEMS FOR PVC DOORS Door hinges for any requirement MACO door hinges are suitable for use on all doors with
More informationISSUE B, OCT Architectural Square Ceiling Diffusers. UNI & AUNI Diffusers. Advanced Air
ISSUE B, OCT 2009 Architectural Square Ceiling Diffusers UNI & AUNI Diffusers Product Overview - Uni Series Architectural Ceiling Diffusers Uni Series High Performance Square Face Round Neck The Model
More informationCLIP-IN SILENCE. Glass partition and door system for acoustic insulation SYSTEMS
CCERTIFIED CLIP-IN SILENCE ERTIFIED Glass partition and door system for acoustic insulation SYSTEMS CLIP-IN SILENCE Fully glazed, silicone-free, sound-insulating partitioning system Description Do you
More informationF650/800GS Safari Luggage Installation Guide
F650/800GS Safari Luggage Installation Guide Thank you for purchasing Jesse Luggage for your Motorcycle. Our Luggage, handcrafted in the USA, is designed for those with an interest in finding the most
More informationISO 9001:2008
DOOR Dutch, Standard Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the
More informationSecured Door w/ Electric Lock - Solenoid
Secured Door w/ Electric Lock - Solenoid Solution family: Interior Door solution Solution group: Single-Wood-Self Closing- Access Control Description The ASSA ABLOY Belgium solution for secured interior
More informationIncorporating V2.1. Product spec >>> > Series WL - Standard weather louvres
Incorporating V2.1 Product spec >>> > Series WL - Standard weather louvres Louvres Standard Recoended for: Exterior walls Intake & return Overview Good rain protection Flanged, recessed and reversed available
More informationALU axxent PLUS-DK KPW
ALU axxent PLUS-DK KPW Concealed turn-and-tilt hardware with mishandling device (FBS) on the corner drive (EUL) FBS KPW Tilt point vertical (KPW) Size range It is essential to adhere to the details of
More information