UniGrip Vertical Toggles
|
|
|
- Margery Stevens
- 5 years ago
- Views:
Transcription
1 UniGrip Toggles Over 00 Clamp Variations Available Standard Series Standard s UCC Series Toggle Clamps Extra Hold Supplied with UCC-008 Neoprene-tipped Spindle and washers Will free up space on fixtures. Handle moves 65, moves 90. For higher clearance requirements, add a 1" wide steel strap to raise. Designed for SIDE MOUNTING. 0 lb.. Side mounted small Hold Down Clamp. Furnished with U-shaped Hold Down and flanged washers. UCC-008 Neoprene tipped Spindle Len UCC B HANDLE UCC-30010B HANDLE -11/16-11/16 3-1/3 5/3 x 35/6 SIDE MOUNT -11/16 5/6 x 35/6 1-9/ / oz. (135g).5 oz. (115g) 0 lbs. 0 lbs. GH101B GH10B UCC-30010B UCC B SIDE MOUNTED UCC Series Toggle Clamps Supplied with UCC-0108 Neoprene tipped Spindle. For lighter applications. Affordable Space Savers! opens 100. Handle moves lb.. 's Smallest Hold Down Clamp saves space. furnished with U-shaped Hold Down and flanged washers. UCC-0108 Neoprene tipped Spindle UCC HANDLE UCC-30001T T- HANDLE UCC-30001B HANDLE 3" -1/" 3" " 5/8 x 15/16 " 5/8 x 15/16 " 5/8 x 15/16 5/8 1" 5/8 1" 7/8 1" oz. (60g) oz. (60g) oz. (60g) 100 lbs. 100 lbs. 100 lbs. 01 CL150 VTC GH101A 01T CL15 VTC GH101T 01B CL151VTC GH101AI UCC-3000 Series Toggle Clamps 00 lb.. Supplied with UCC-008 Neoprene-tipped Spindles. Holds Spindle in fixed location. Vinyl Grip Handle moves 65, opens 100. Space and clearance saver. The Two Style allows spindle to be fixed or adjustable. Extra Hold. UCC-3000 HANDLE UCC-3000T T- HANDLE UCC-3000B HANDLE 3-3/ /16-1 1/ x 1-1/16-1 1/ x 1-1/16-1 1/ x 1-1/ FIXED 1-1 FIXED oz. (170g) 6 oz. (170g) 6 oz. (170g) 100 WOODRUFF AVE. DOWNEY, CA TELEPHONE (56) / (800) IN CA / (800) FAX (56) / (800) L united@ucc-udb.com WEBSITE 00 lbs. 13/6 00 lbs. 13/6 00 lbs. 13/6 0 CL50 VTC GH1050 0T CL5 VTC GH1070 0B CL51 VTC GH1055 UCC-008 Neoprene tipped Spindle ACCEPTS ALL 1/-0 SPINDLES.
2 Variable s UCC SERIES UniGrip Toggles and T-Handles. and s. U-s and s. This series has 500 lbs. capacity. Series accept 5/16-18 Spindles. Spindle s supplied with bolt retainers. washers are provided with all U-s. Manufactured with or d s. Vinyl Handle is provided. Handle moves 60, moves 100. U-s are 5/8" high and 1/" thick. Adjust 1/" horizontally. of T-Handle is 3-5/8". Ergonomic Grips provided for greater comfort. HANDLE & Our Broadest Series of Models The Most Popular Clamps! 500 Pound This Series has many models of, Handle and variations. Handles move 60 s open / 3/ 3/ UCC-508 Neoprene Tipped Spindle UCC-30007U UCC-30007UL UCC-30007UB This Series accepts 5/16-18 Spindles. HANDLE & UCC-30007U UCC-30007TU T-Handle UCC-30007UL UCC-30007UB UCC-30007LB UCC-30007S UCC-30007SB UCC-30007TS T- Handle UCC-30007L UCC-30007USS 5-1/ -1/ 5-1/ 5-1/ -1/ 5-1/ 5-1/ HANDLE & -9/16 3/ x 1-1/ -9/16 3/ x 1-1/ 5-1/ 3/ x 1-1/ -9/16 3/ x 1-1/ 5-3/ x 1-1/ " 3/ x 1-1/ " 3/ x 1-1/ " 3/ x 1-1/ 5" 3/ x 1-1/ -9/16 3/ x 1-1/ 1-1/ -1 U- 1-1/ -1 U- T-HANDLE & 1-1/ 3-3/ Long U- 1-1/ -1 U- 1-1/ 3-7/16 1-1/ -1/ 1-1/ -1/ 1-1/ -1/ 1-1/ -1/ 1-1/ -1/ 1.5 oz. (355g) 13 oz. (370g) 13 oz. (370g) 1.5 oz. (355g) 1.5 oz. (355g) 1.0 oz. (31g) oz. (680g) 5.9 oz. (70g) 1.5 oz. (355g) 1.5 oz. (355g) 07U CL50 VTC GH TU CL5 VTC GH UL CL53 VTC GH113 07UB CL51 VTC GH LB GH117 07S CL350 VTC GH110 07SB CL351 VTC GH115 07TS CL35 VTC GH111 07L CL353 VTC GH11 07USS CL50 VTC-S GH1130-SS T-HANDLE & UCC-30007S UCC-30007L UCC-30007USS STAINLESS UCC-30007LB UCC-30007SB UCC-30007TU UCC-30007TS All TOGGLE CLAMPS on this page are provided with the appropriate Bolt Retainer or U-Washers and Retainers. Retainers furnished with each solid bar style. Two flanged washers supplied with each toggle U- style. Appropriate Spindles provided with each Toggle Clamp. L6 Quick Clean Economical! 7-3-0
3 UniGrip Toggles Our Stronger Series of Models The Most Durable Clamps! Larger 750 Pound UCC SERIES and T-Handles. and s. U-s and s. This series has 750 lbs. capacity. Series accept 3/8-16 Spindles. Spindle s supplied with bolt retainers. washers are provided with all U-s. Manufactured with or d s. Vinyl Handle is provided. Handle moves 58, opens 105. U-s are 3/" high and 5/1 thick. Adjusts -9/1 horizontally. of T-Handle is 3-5/8". Ergonomic Grips provided for greater comfort. This Larger Series has many models of, Handle and variations. Handles move 58 s open 105 Larger Toggles UCC-508 Neoprene Tipped Spindle HANDLE AND UCC-30010U 7-1/ / x 1-5/3 1-11/ U-. oz. (636g) 1/6 10U CL650 VTC GH165 UCC-30010SB UCC-30010US UCC-30010TU T-Handle UCC-30010TS T- Handle 8" 7-1/ 6-1/ 5-1/ / x 1-5/ / x 1-5/ / x 1-5/ / x 1-5/ / / U- 1-11/ oz. (680g) 1/6 oz. (680g) 1/6 5 oz. (710g) 1/6 5.9 oz. (70g) 1/6 10SB CL551 VTC GH180 10S CL550 VTC GH175 10TU CL5 VTC GH185 10TS CL55 VTC GH195 UCC-30010U UCC-30010USS This Series accepts 3/8-16 Spindles. 1-1/ 3/ 3/ UCC-30010UB UCC-30010TUB T- Handle 8" / x 1-5/ / x 1-5/3-3-1 U oz. (665g) 1/6 5 oz. (710g) 1/6 10UB CL651 VTC GH170 10TUB GH190 T-HANDLE & UCC-30010TSB T- Handle / x 1-5/3-3-1 U- 5.9 oz. (70g) 1/6 10TSB GH1300 UCC-30010TU UCC-30010USS 7-1/ / x 1-5/3 1-11/ U- 5.9 oz. (70g) 1/6 10USS CL650 VTC-S GH165-SS T-HANDLE & UCC-30010TSB HANDLE & UCC-30010US T-HANDLE & HANDLE U- & UCC-30010UB UCC-30010TS T-HANDLE & UCC-30010TUB HANDLE & UCC-30010SB 100 WOODRUFF AVE. DOWNEY, CA TELEPHONE (56) / (800) IN CA / (800) FAX (56) / (800) united@ucc-udb.com WEBSITE L7
4 Toggles High Heavy Duty 1000 Lb. & 100 Lb. UCC-3007 SERIES HEAVY DUTY Large 1000 lb. and U-s & s capacity 1000 lbs. max. Heavy Duty design. Handle moves 58, opens 100 with pin in bottom stop hole. In the top stop hole, the Handle moves 70 and the opens 135. UCC-003 Adjustable Spindle Supplied with adjustable spindle. See Spindle Section for selection. (Accepts all 1/-13 dia. spindles) Guide features greater stability pound. Bolt retainer furnished on models. Bushings and Pins are hardened. 1-1/ 3/ UCC-3007U Accepts all 1/-13 Spindles UCC-3007U HANDLE UCC-3007S HANDLE UCC-3007SB HANDLE UCC-3007UB HANDLE 8-7/8 8-7/8 9" 9" 6-15/16 1-1/ x 1-5/3 6-15/16 1-1/ x 1-5/3 6-15/16 1-1/ x 1-5/3 6-15/16 1-1/ x 1-5/3 " -15/16 " -15/16-1/ -15/16-1/ -15/16 oz. (150g) 11/3 oz. (150g) 11/3 oz. (150g) 11/3 oz. (150g) 11/3 7U CL850 VTC GH107 7S CL750 VTC GH109 7SB CL751 VTC GH1050 7UB CL851 VTC GH108 3/ HANDLE U- & HANDLE & HANDLE & HANDLE & UCC-3007UB UCC-3007SB UCC-3007S UCC UCC-3007U UCC-30067U UCC SERIES HEAVY DUTY Largest 100 lb. Toggles & U-s capacity 100 lbs. max. Heavy Duty design. Handle moves 70, opens 10 with pin in bottom stop hole. In the top stop hole, the Handle moves 56 and the opens 100. Accepts all 5/8-11 diameter spindles Supplied with adjustable spindle, bolt retainer and flanged washers. See Spindle Section for appropriate selections. Ergonomic vinyl hand grip. L8 UCC-0503 Adjustable Spindle UCC-30067U Accepts all 5/8-11 Spindles UCC HANDLE UCC-30067U HANDLE Guide features greater stability. 100 pound. Bolt retainer furnished on models. Bushings and Pins are hardened. 1" 1" 9" x -3/ 9" x -3/ 3-1/ 3-1/ 5.6 Lbs. 31/6 5.6 Lbs. 31/6 67 CL950 VTC GH101JS 67U CL1050 VTC GH101J Quick Clean Economical! 7-3-0
5 UniGrip Horizontal Toggles The Ultimate in Quality Jig and Fixture Clamps Miniature Series Hold-Down and Horizontal Handles The Midget Toggle Clamp Series! U-d. Low silhouette hold down clamp can be operated from either side or behind with its unique handle. Great holding capacity for their size. base with U- and Spindle. Handle moves 175, 9. UCC U UCC USS Stainless UCC U UCC U Ht. 1-7/16-1/ 1 x 7/8 1-7/16-1/ 1-1 x 5/8-3/8 3-1/16 x 15/3 3-1/ 3-1-3/8 x 1-1/ Ht 1/ 1- U- 1/ 1 7/8-9/16 U- 1-5/16-1/3 UCC HOLD-DOWN SERIES oz. (3g) 150 lbs. 11/6 1.5 oz. (3g) 00 lbs. 11/6 8 oz. (3g) 350 lbs. 1/ oz. (3g) 50 lbs. 5/ to 350 lbs. 305U CL00 VTC GH USS CL00 VTC-S GH13005SS 307U GH U GH13008 U- Midget Space Saver! UCC-0108 Spindle Assembly 10- x 1-3/8 The smallest horizontal handle Clamps! U-d. 60 lbs.. Compact - Most economical - Ideal for holding sheet metal and circuit boards. Handle moves 80. moves lbs. max. Supplied with UCC Nylon Spindle Assembly. UCC SERIES UCC Nylon Spindle Assy U- 60 lbs. UCC UCC-30005S UCC-30005SB UCC-30005U UCC-30005UB 11/16 3-1/16 5/8 x 5/8 7/8 3-5/8 x 5/8 11/16 3-1/16 5/8 x 5/8 7/8 3-5/8 x 5/8 3/8 11/16 FIXED 1 11/16 FIXED 5/16 11/ / oz. (3g) 1.5 oz. (3g) 1.5 oz. (3g) 1.5 oz. (3g) 11/6x17/6 11/6x17/6 11/6x17/6 11/6x17/6 05S CL150 HTC GH01A 05SB CL151 HTC GH01AI 05U CL50 HTC GH01 05UB CL51 HTC GH01-I HT Fixed UCC-30005S Silhouette Minimum clearance Clamp 1-1/'' height when closed. Just the right size! 00 lbs.. 00 lbs. max. Supplied with 1/-0 x 1-3/ UCC-008 Neoprene-Tipped Spindle. The Correct Size clamp for many applications! UCC-30015U UCC-30015S UCC-30015SB UCC-30015UB 1 5-7/16 1-1/16 x 7/ /16 1-1/16 x 7/8 1-15/16 5-7/16 1-1/16 x 7/8 1-15/16 5-7/16 1-1/16 x 7/8 1" -5/16 1" -5/16 1-7/16-5/16 1-7/16-5/16 UCC-30015S UCC-008 Neoprene Tip.6 oz. (130g).6 oz. (130g).6 oz. (130g).6 oz. (130g) UCC SERIES 15U CL 350 HTC GH01B 15S CL 300 HTC GH01BS 15SB GH01BSI 15UB CL351 HTC GH01BI U- U - UCC-30015U U - UCC-30015UB UCC-008 Spindle Assy 100 WOODRUFF AVE. DOWNEY, CA TELEPHONE (56) / (800) IN CA / (800) FAX (56) / (800) united@ucc-udb.com WEBSITE L HT 00 lbs. UCC-30015SB
6 Horizontal Handles UniGrip Horizontal Toggles Most Popular Horizontal Jig and Fixture Clamps / s & Short/Long s or s UCC-3005U Horizontal Toggle Clamps UCC-3005U UCC-3005UB UCC-3005UB HANDLE MOVES 65 - MOVES 90 UCC-508 Nylon Spindle Assy UCC-3005U UCC-3005USS STAINLESS UCC-3005UB UCC-30035U Horizontal Toggle Clamps UCC-30035U OVERALL UCC-30035UB UCC-30035UB OVERALL HANDLE MOVES 50 - MOVES 85 UCC-3006 Horizontal Toggle Clamps SHORT UCC-3006U OVERALL 100 lbs. UCC-3006UL LONG HIGH or LOW S UCC-3006UL HANDLE MOVES 9 - MOVES 90 LEN. 3-5/3 5" UCC-30035U UCC-30035USS STAINLESS UCC-30035UB 500 lbs. Quick Clean Economical! U- d with increased holding capacity. Most popular horizontal clamp. 500 lbs. max. All styles supplied with 5/16-18 UCC-508 Nylon Spindle Assembly. L " x 7/ " x 7/ " x 7/8 750 lbs. UCC-5708 Neoprene tipped Spindle & d washers UCC-3006U UCC-3006UL UCC-3006ULH 1-3/8-5/3 1-3/8-5/3 1-5/8-5/3 9. oz. (65g) 9. oz. (65g) 9. oz. (65g) 17/6 17/6 17/6 5U CL50 GH5D Adjustable Series with Vinyl Handle Just the Clamp you need! 5USS CL50HTC-S GH 5DSS 5UB CL 51HTC GH 5DI 750 lbs. max. Supplied with 3/8-16 x 3-1/ UCC-5708 Neoprene-Tipped Spindle with flanged washers, bolts and retainers. -1/ 10-3/8 1-5/8 x 1-5/8-1/ 10-3/8 1-5/8 x 1-5/8-10-3/8 1-5/8 x 1-5/8 Horizontal Heavy Duty Series with Vinyl Handle Bigger and Better No Competitor! 100 lbs. max. Supplied with a UCC-003 or UCC-3503 Hex Adjustable Spindle Assembly. Constructed in extra thick tough steel with pivots and bushings hardened and ground for smooth action and long life. -5/3 11" -1/ x -1/6-5/3 1-3/ -1/ x -1/6 3-5/3 1-3/ -1/ x -1/6 1-5/3 LOW 1-5/3 LOW -5/3 HIGH 1-3/ - 1-3/ - -5/16-3-5/3 SHORT 5" LONG 5" LONG.6 oz. (60g).6 oz. (60g).6 oz. (60g) Wt..6 LBS..8 LBS. 3. LBS. 1/6 1/6 1/6 3/8 3/8 3/8 35U CL550 HTC GH035 35USS CL550 HTC-S GH035SS 35UB CL551 HTC GH036 GH0-GB GH0-GBL GH0-GBLH
7 UniGrip Hold-Down Side Mount, Pull-Action & Latch Side Mount Hold-Down, Pull-Action & Latch Hold-Down Action Clamp - Horizontal or Mounting UCC U Our Hold-Down Clamps have easy part loading with low silhouette and flexible mounting. Opened bar completely clears work area. U- and 5/16-18x bonded Neoprene tipped spindle UCC-508 and washer assembly provided. Easy comfort vinyl grip. 0 lb.. Handle opens 60 - opens lbs. 5/8 UCC U HOLD DOWN SIDE MOUNT 6-7/16 6-1/ 5/8x1" -3/ -15/3 1 OZ. 8 TOTAL & 17/6 0 lbs. 317U CL-75HTC GH /16 Side Mount 1" Strong Secure Closing and. For original equipment doors mold closures Pull Action Toggle Clamps UCC Latch point must be below centerline of the two pivot points to allow positive lock. Once installed, this pull action clamp provides fixed stops at various positions. This eliminates the need to adjust a manual stop. UCC has a " draw motion. 375 lbs. UCC /8 8-11/6 1-1/ x 3/ 1-5/8 3-1/16 1 oz. 375 lbs. 301 CL150PA GH3101 Positive locking Simple to use Durable and Steady : lbs. Latch Type Toggle Clamps UCC & UCC These latching action models are excellent for pressure vessels, doors and all latching operations. Pull s are threaded for simple adjustment. Comfortable vinyl hand grip supplied. UCC and UCC have s. UCC UCC B UCC / 8-5/16 3/ x 1-3/8 1-1/ 8-5/16 x 1-1/ -3/8 11-1/ 1-1/ x 1-5/16 3/ -5/ oz. 3/ -5/ oz. 17/6 1-5/6 3-1/8 oz. 375 lbs. 351 GH51 35 lbs. 351B CL50PA GH5 700 lbs. 371 CL51PA GH to 700 lbs. and Mounts Most popular style with its Adjustable single hole design! Available in Stainless. 100 WOODRUFF AVE. DOWNEY, CA TELEPHONE (56) / (800) IN CA / (800) FAX (56) / (800) united@ucc-udb.com WEBSITE L11
8 Pull-Latch-Squeeze UniGrip Latch and Squeeze Versatile Pull Latching Action Toggle Clamps UCC-30033, UCC & UCC Pull Latch Type Toggle Clamps Pull Action Supplied with Latch Plates. Central Locking Action holds against heavy forces. Threaded U-Bolts adjust easily for a positive connection. HOLE PATTERN 360 to 000 lbs. One of the popular models! These latching action models are excellent for pressure vessels, doors and all latching operations. Comfortable vinyl hand grip supplied. UCC UCC UCC SS UCC /3 ADJUSTABLE 3-15/3 min. 1-5/8 ADJUSTABLE 5-31/3 min. 1-5/8 ADJUSTABLE 5-31/3 min. - ADJUSTABLE 7-1/ min. & Clamp 3/ x 5/8 3/ x 1-1/ 3/ x 1-1/ 1-5/8 x 1-1/ Adjustable /3.5 oz. (70g) -9/16 1/3 8 oz. (5g) -9/16 1/3.5 oz. (60g) 3-7/8 15/16 oz. (680g) 6 11/6 6 17/6 6 17/6 6 11/3 Hook Adjustment Drawing Movement 9/ lbs 33 CL100PA GH03 5/16 1-3/ 700 lbs 331 CL00PA GH31 5/16 1-3/ 700 lbs 331SS CL00PAS GH31SS 9/16-1/ 000 lbs 31 CL300PA GH031 " UCC Latch Type Toggle Clamps UCC UCC Standard Clamp LITE DUTY 9-11/16 Clamp " 9-11/16-1/ x -1/ 3-3/ 8-5/8-1/ x -1/ Latch -1/ x 1-3/8-1/ x 1-3/8 Pull Action -1/ 1-3/8 1-1/8 Adjustable 5-5/8 1-1/8 Adjustable 5-5/8 3-1/8 Simple adjustment joins easy operation with maximum holding. Heavy Duty and Lite Duty variations of this popular model. Supplied with comfortable vinyl hand grip. 000 lbs. LATCH PLATE UCC LP optional. Forged for strength and durability. Over center toggle locating action holds heavy forces. oz. 8 13/3 5 oz. 8 13/3 Hook Adjustment Drawing Movement 5/8 3-1/ 000 lbs 375 CL00PA GH0370 1" lbs 385 CL500PA GH0380 UCC lbs lbs. 3-3/ C-Clamp Extra Heavy HEAVY DUTY 8-5/8 Pull Action -1/ 1-3/8 Ref: Ideal for fast clamping containers, doors, pressure vessels and all latching operations. Threaded U-Bolt allows easy adjustment. LATCH PLATE UCC LP optional. Forged part construction. Easy operation. Simple adjustments. Handles very high pressures. Quick Clean Economical! L /8
TOGGLE CLAMPS AND LATCHES. See the New Secure-Lock Latch Clamps, pgs Distributed by: QUALITY DIVERSITY ECONOMY
TOGGLE CLAMPS AND LATCHES See the New SecureLock Latch Clamps, pgs. 2834 Distributed by: www.goodhandinc.com QUALITY DIVERSITY ECONOMY DRIVEN BY CUSTOMER DEMAND For over 45 years, we ve served our valued,
Lifting capacity rated from 7,000 to 10,000 pounds. Safety Factor 5:1. Loads are distributed in rectangular base.
Pivot Lifting Plates Pivot Lifting Plates 4140 Certified Aircraft High Quality Heat Treated Steel Material Lifting capacity rated from 7,000 to 10,000 pounds. Safety Factor 5:1 Loads are distributed in
Release lock Models HH 300 RL FA 200 RL HH 400 RL FA 300 RL HH 500 RL FA 400 RL
Neue Modelle mit SICHERHEITSVERRIEGELUNG Release lock Models HH 300 RL FA 200 RL HH 400 RL FA 300 RL HH 500 RL FA 400 RL HH 600 RL HH 350 RL HH 450 RL HH 55 RL RL HV 200 RL Sl 310 RL HV 300 RL SL 350 RL
Clamping Technology. destaco.com VOL. 1 MANUAL PNEUMATIC ûÄǺ¹ Ñ ÄÃú ɺ¹ Ñ ÇÄ¹Ê É¾Ëº
Clamping Technology VOL. 1 MANUAL PNEUMATIC ûÄǺ¹ Ñ ÄÃú ɺ¹ Ñ ÇÄ¹Ê É¾Ëº i-1 A Global Presence Charlevoix, Michigan Großbritannien Niederlande Red Wing, Minnesota Auburn Hills, Michigan Deutschland Wheeling,
squeeze action plier clamps
squeeze action plier clamps Sizing and Application Chart N [lbf.] Maximum Clamping Thickness mm [inch] Series Page: MC-SAP-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 65] 3000
LSM SFM. METRIC SPECIFICATIONS and TECHNICAL INFORMATION
Metric Bushings Specifications M is for Metric RCM LSM SFM SFXM LM PM HM HLM SPM NM SCM FGM HGM SPECIFICATIONS and TECHNICAL INFORMATION BUSHING INFORMATION Application Information is listed on the specific
Squeeze Action Plier Clamps
7.7 Series 460, 480 Product Overview Drop forged alloy steel components for exceptional strength Two way trigger release allows for fast and easy opening of clamp Welding 462 462-2 463 480 482 With Two
MODEL DESCRIPTION IN LBS.
QUIC-RELEASE Oxygen Tank System Model QR-OTS- -U Parts and Mounting Information ZICO 00PM0 Rev. --7 Model QR-OTS-U allows you to mount any "M" through "J" cylinder. The system uses a QR-MV Multiversal
:45 Pagina 5 Clamping
Clamping Clamping Wrenches The Original Heavy-Duty Pipe Wrench Ridge Tool, the world s leading manufacturer of pipe working tools, produces today millions of pipe wrenches with types and sizes to fit every
20:1 Ratio. Gen 2 Pro-Lite This Black Box version of the Gen 2 Pro-Box is the lightest professional grade steering box on the planet.
Stiletto Steering has been a prominent leader in precision steering components in many types of racing for over 4 ½ decades. The wide selection of purpose built steering boxes are known for their smooth
Squeeze Action Plier Clamps
7.1 N[lbf.] Maximum Clamping Thickness mm [inch] Series Section.Page 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 4000 [675 to 900] 4000 to 5000 [900 to 1125] 5000 to
PowerGrip Timing Belt Drives
PowerGrip Timing Belt Drives Single Sided Belt Drive Systems PowerGrip Timing Belt drives operate on the tooth-grip principle, with the molded teeth the belt designed to make positive engagement with the
1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
Engineer The Lift!! HOIST RINGS. Applied Load Changes With Sling Angle. Sample Calculation: DO S DON TS
H&O DIE SUPPLY, INC. 1-800-222-5441 sales@hodie.com HOIST RINGS 10 Adjustable Alloy Chain Sling... 10.16 Center Pull Style... 10.4-10.5 Envirolox Protective Finish... 10.11 Eye Bolts... 10.15 Eye Nuts...
Pull Action Latch Clamps
6.1 Pull Action Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
Parts Manual. UltraBelt GD Walk Behind Mower
Parts Manual UltraBelt GD Walk Behind Mower Models: Description: UltraBelt GD, 14HP Kohler w/ 36" Mower Deck 5900027 15HP Kawasaki V-Twin w/ 36" Mower Deck (AV15) 5900030 15HP Kawasaki V-Twin w/ 48" Mower
Two-Hand Tool Series from Dynabrade
Two-Hand Tool Series from Dynabrade Random Orbital, Gear-Driven and Dual Action Sanders Reorder No. D04.05 Efficient Pneumatic Motor Offers Increased Power Advanced Design Allows Optimum Comfort and Control
Distributed by Tri-State Equipment Company Inc
Distributed by Tri-State Equipment Company Inc. sales@tsoverheadcrane.com 314-869-7200 www.tsoverheadcrane.com Harrington Manual hoist products CB Hand Chain Hoist 1 2 through 100 Ton capacity Harrington
VAN INTERIORS TRUCK RACKS VAN RACKS AND MORE KARGOMASTER.COM
TRUCK PRODUCTS 2019 CATALOG V1.0 VAN INTERIORS TRUCK RACKS VAN RACKS AND MORE KARGOMASTER.COM 800-343-7486 TABLE OF CONTENTS 3 3 3 4 PRO II HEAVY DUTY RACKS PRO III MEDIUM DUTY RACKS PRO IV MEDIUM DUTY
Litter Spreader. Models SP400, SP450, SP500, SP550. Illustrated Parts Breakdown
Litter Spreader Models SP00, SP0, SP00, SP0 Illustrated Parts Breakdown Page Front End Page Hydraulic System (w/ Side Mounted Reservoir) Page Hydraulic System (w/ Front Mounted Reservoir) Page Hydraulic
Choose the Specified Leader in Utility Products... Little Mule
Choose the Specified Leader in Utility Products... Little Mule Request the Lineman s Products Catalog Featuring Strap Hoists, Link or Roller Chain Lever Hoists, Wire Grips, and Cable Pullers. Ask For Publication:
LIF TING SOLUTIONS. Lifting Solutions
Center Pull Style... 484-485 Envirolox Protective Finish... 494 Eye Bolts...500 Eye Nuts... 499 Forged Center Pull...487 488 Forged Center Pull Stainless Steel...486 Kwik-Lok Lifting Pin...495 496 Hold
PRODUCTS FOR ROTATIONAL MOLDERS. Product Catalog. destaco.com
PRODUCTS FOR ROTATIONAL MOLDERS Product Catalog 2 A Global Presence Netherlands Charlevoix, MI USA UK Red Wing, MN USA Wheeling, IL USA Auburn Hills, MI USA France Germany Spain China Brazil India Thailand
Transportation Products
Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient
MODEL 38516x52A REPAIR PARTS CHASSIS & HOOD
MODEL xa CHASSIS & HOOD 0 MODEL xa Seat Cap, Push 0n x Spring 0 Screw x Bolt, Wing 0 Washer x Z Bolt, Shoulder x Support, Seat E00 Rod, Pivot Z Bracket, Pivot E00 Bolt x Nut x Bolt, Shoulder x Washer Z
BRENCO. Aerial Tools & Equipment
BRENCO 81 C2 Cable Lasher For cables or cable bundles up to 1.87 in. (4.7 cm) on strands 1/4 in. to 3/8 in. Positive mechanical brake prevents lasher back-up until brake is released. Built to last, the
APT PAVING BREAKERS TOOL MAINTENANCE & REPAIR INFORMATION REMEMBER: PREVENTIVE MAINTENANCE WILL ASSURE MAXIMUM PERFORMANCE FROM ALL OF YOUR APT TOOLS.
PAVING BREAKERS AMERICAN PNEUMATIC TOOL TOOL MAINTENANCE & REPAIR INFORMATION Check BEFORE, DURING AND AFTER use of tools. FIELD OPERATION: Before: 1. Fill the oil reservoir with Air Tool oil or 10W equivalent.
OWNERS MANUAL. Model No LB. PUSH BROADCAST SPREADER. Assembly Operation Maintenance Repair Parts
OWNERS MANUAL Model No. 45-02102-101 SHIELD UP - 8 TO 18 FT. SPREAD WIDTH SHIELD DOWN - 3 TO 4 FT. SPREAD WIDTH 125 LB. PUSH BROADCAST SPREADER CAUTION: Read Rules for Safe Operation and Instructions Carefully
PERFORMANCE...PERFORMANCE...PERFORMANCE.
TRIMMERS TM PERFORMANCE...PERFORMANCE...PERFORMANCE. What else needs to be said about the world s finest commercialgrade trimmers? Our easy-to-use custom ergonomic controls, light-weight design and super
FEATURES. (fig.1) (fig. 2) (fig. 3) (fig. 4)
Catalogue 1/2016 FEATURES (fig.1) (fig. 2) (fig. 3) (fig. 4) Using the toggle principle, the quick clamping tools have decisive advantages: The clamping lever is opened so as to completely clear the
pull action latch clamps
pull action latch clamps Sizing and Application Chart Click Page # View Max. Holding Capacity N [lbf.] Plunger Travel mm [inch] Series Page MC-PAL-# 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000
Transportation Valves
Transportation Valves A Name You ve Trusted for Years... 780 Series Butterfly Valves Features: Available in sizes 3 thru 6 One handle fits sizes 3 thru 6 Integrated 180º notch plate eliminates mounting
VALTRA FRONT LOADERS VALTRA N SERIES YOUR WORKING MACHINE
VALTRA FRONT LOADERS VALTRA N SERIES YOUR WORKING MACHINE SPECIAL FEATURES FOR PRODUCTIVE WORK Front loader features Valtra front loaders are an integral part of the tractor, tailored to the customer s
Pull Action Latch Clamps
6.1 Pull ction Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
Parts & Owner s Manual
Havener Enterprises, Inc. 368 S. Michigan Ave. Bradley, IL 60915 815.935.8383 32, 36, 48 & 52 Commercial Belt-Drive Mowers Parts & Owner s Manual Congratulations on the purchase of your new Bradley mower.
Pull Action Latch Clamps
5.1 Pull Action Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
HORIZONTAL CLAMPS Features: Specification:
HORIZONTAL CLAMPS Features: Horizontal clamps are usually used where height restrictions prevent the use of a Vertical clamp, or where the action of the clamping arm and handle rotating in opposite directions
Straight Line Action Clamps
Straight Line Action Clamps Sizing and Application Chart Click Page # View N [lbf.] mm [inch] Series Page MC-SLA-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 5000
19 12A 12B 14E 11C 14A 11B 14D 14G 14H 14F FITNESS VFT-100 WITH SWIVELING DOUBLE PULLEYS
26 23 20 24 25 22 21 27 35 3 19 12A 17 1 12B 14E 11C 14A 11B 14D 14G 14H 14F 45 46 15 2 38-41 11M 13 16 18 6 11D 11A 7 8 4 11G-11L 11F 9 10 5 FITNESS VFT-100 WITH SWIVELING DOUBLE PULLEYS VFT100 PARTS
3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs
3M Collision Repair Solutions 3M Abrasives and Power Tools Cutting & Grinding for Body Techs 3M Disc Sander Ideal for general metal fabrication applications, including grinding, blending, weld leveling
215E. Operator and Parts Manual MM158
5E Operator and Parts Manual MM58 This manual is furnished with each new TENNANT Model 5E This manual consists of Specifications; Operation; Maintenance; Appendix; the How To Use This Manual; Low Dump
20-G SERIES PRECISION DIE GRINDERS (.2 hp) 40-G & 41-G SERIES DIE GRINDERS (.9 hp) 4110 & 4111 SERIES DIE GRINDERS (.9 hp)
20-G SERIES PRECISION DIE GRINDERS (.2 hp) DIE GRINDER KIT (Add a "K" to end of tool model number). Includes: (1) 20-G or 20-GM (1) 3 /,6" dia. x 5' long hose (4) '/a" carbide burrs - Cylindrical plain
Protect your short bed pickup by using a positioning device like the Husky Glider with your 16K S
Husky Tilt Plate 16K S Straight Jaw Fifth Wheel Hitch (Husky Silver Series) Husky 16K S Tilt Plate Design Advantages: Addition of a pop out safety hookup indicator Engineered/designed tolerances for less
Parts Manual Rev. A RZT54 /
115 93 37-27 Rev. A Parts Manual RZT54 / 967 672101-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
Stanley Hand tools Features & benefits stanley Fatmax screwdrivers. 11 piece stanley Fatmax screwdriver set
Stanley Hand tools Features & benefits stanley Fatmax screwdrivers Ergonomically designed tri-lobular handle provides more torque than traditional-style screwdrivers for less effort. High strength polypropylene
HANDLING EQUIPMENT HANDLING EQUIPMENT
HANDLING EQUIPMENT 1337 STEEL HAND TROLLEYS REF 105TA4564 Hand protection The right hand trolley for every application to suit any budget! Hand protection With slide clamps! REF 108TA8369 Small hand trolley
Portable Air Tools for the Value-Minded Professional
Reorder No. D05.09 Red Portable Air Tools for the Value-Minded Professional Includes Abrasive Belt Tools, Die Grinders, Disc Sanders, Buffers and More DynaZip Air Tools (See Page 2) 18255 DynaZip Air Tool
Lime Spreader. Model SL10. Illustrated Parts Breakdown. Hydraulic System Hydraulic Manifold. Twin Speed Reducer
Lime Spreader Model SL0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Hydraulic System Hydraulic Manifold Switch Box Floor & Apron Axle Assembly Apron Drive
Ergonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption
3/8 Impact wrench The smallest in PCL s range of Prestige Impact Wrenches. The 3/8 Impact Wrench is designed for professional heavy duty use, with an ergonomically designed soft grip handle and a lightweight
Advolution 2710 PARTS LIST MODELS , , /06 revised 5/09 FORM NO
PARTS LIST MODELS 56422000, 56422002, 56422184 3/06 revised 5/09 06-3 09-5 TABLE OF CONTENTS 1 DESCRIPTION PAGE Body System... 2-3 Chassis System... 4-5 Decal System... 6-7 Electrical System... 8-9 Pad
TOOL AND SUPPLY CARTS THE NOLAN COMPANY
TOOL AND SUPPLY CARTS THE NOLAN COMPANY 1016 Ninth Street SW Canton, Ohio 44707 USA Toll-free: 1-800-297-1383 or 330-453-7922 Toll-free Fax: 1-800-225-0984 or 330-453-7449 Web: NolanCompany.com MAIN OFFICE
Drum Handling. Drum Transporter and Pouring Stand. Drum Trolley and Pouring Stand. Low Loading Drum Carrier Capacity 250kg.
62 Drum Transporter and Pouring Stand For 210 litre steel drums Capacity 350kg Welded steel construction. Removable 2-position handle Wheels: 2 x 400 mm dia. 2 x 160mm dia. castors, with solid rubber tyres.
product catalog / March 1, 2003
MADE IN U.S.A product catalog / March 1, 2003 MANUFACTURERS OF HIGH QUALITY AMERICAN MADE HAND TOOLS FOR OVER FIFTY YEARS users guide to hex AND torx tools A USER'S GUIDE TO HEX AND TORX TOOLS WHEN YOU
Shearseal Knife Gate Valves. Manufactured by TSE
Shearseal Knife Gate Valves Manufactured by TSE Shearseal Design Most knife gate valve manufacturers describe their valve as rugged and dependable. In the Shearseal Valve, these qualities are not idle
Hardwood Deck Platform Truck
Hardwood Deck Truck Series 31-005 These economical platform trucks are popular for nearly every application that requires economy, ease of use and durability. Commonly used in stores, warehouses and factories
MAREK Industrial a.s. ** marek.eu ** **170728
VA SERIES HEAVY DUTY VERTICAL CLAMPS Features: All VA series clamps are designed to be adaptable and durable, and to withstand abuse in heavy duty applications. The new VA300 series helps fill the gap
Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16
Dynafile...8 Dynafile II...11.4 hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile III...18 Dynabelter...22 Dynangle...25 Dynangle II...26 Take-About Sander...27
Hose & Hose Clamps. EPDM Rubber Pressure Hose. Hose & Clamps. EPDM Rubber Hose
Need a hose to transfer liquid, dry material, dust, or fumes? We have hoses for almost every material and application, featuring Parker, Sun-Flow, and Flexaust from 1/8 to 8 diameter. Make sure the hose
PWB ANCHOR KITO L5. Description Compact, Light and Tough Frame for Heavy Duty Applications KITO LEVER HOIST Model L5
Active Lifting Equipment - 34 York Street, Wingfield, SA 5013 Australia Phone: 08 8359 1241 - Email: enquiries@activelifting.com.au PWB ANCHOR KITO L5 Description Compact, Light and Tough Frame for Heavy
CABLE GRIPS Strain-Relief Grips Pulling Grips Support Grips
Tough and dependable, Woodhead cable grips and cord grip bodies are reliable workhorses in any plant environment. They serve as flexible holding devices used to pull cable, rope, or tubing into place,
Agri-Fab OWNERS MANUAL. Model No LB. PUSH BROADCAST SPREADER. Assembly Operation Maintenance Repair Parts
Agri-Fab OWNERS MANUAL Model No. 45-02142 100 LB. PUSH BROADCAST SPREADER CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts the fastest way to
SERIES G603 STANDARD FRONT MOUNT GAGE
LIQUID LEVEL GAGE -FRONT MOUNT, FLEXIBLE, CLEAR Economical, versatile and durably constructed. Available in mounting lengths to 600 inches (15240mm). Practical where oil level readings are necessary on
1. Manual clamps Standard range Horizontal and vertical clamps made from galvanised steel plate for ligth to medium clamping application
1. Manual clamps Standard range Horizontal and vertical clamps made from galvanised steel plate for ligth to medium clamping application Clamping tools for professionals Ergonomic plastic handle, mounted
Carbon Fiber Air Shafts. Custom Carbon Fiber Tubes
Carbon Fiber Air Shafts Lightweight composite air shafts... with custom performance by design. NimCor offers an outstanding line of precision engineered carbon fiber shafts with unique performance features.
Low Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
Distributed by Tri-State Equipment Company Inc
COFFING LHH Models - Stamped steel hand chain hoists are an excellent low cost option in the Coffing line. The compact, lightweight design is ideal for construction and contractor applications where portability
Spray Guns. Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency
Spray Guns P E R F O R M A N C E S E R I E S AUTOMATIC MANUAL TOUCH-UP Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency www.devilbiss.com
Economical. Durable. Easy to operate. DBR rope hoist
Economical. Durable. Easy to operate. DBR rope hoist As a technology leader, we offer our customers a complete range of cranes, drives and handling technology for every application all over the world optimized
G R E E N L I T E. c a b l e a c c e s s o r y c o r p o r a t i o n
G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n GT Nylon Cable Ties 4 GT Nylon Cable Ties - Color 5 GS Screw-Mount
CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
CONTENTS ONE YEAR LIMITED WARRANTY
CONTENTS SIDE PUMP BOTTLE JACKS 3 AIR ACTUATED BOTTLE JACKS 4 FAST LIFT SERVICE JACKS 5 SERVICE JACK 5 LOW PROFILE FAST LIFT SERVICE JACK 6 3 TON FAST LIFT SERVICE JACK AND 3 TON JACK STANDS 6 COMBO AIR
Explosion Proof Light - Class 1 Division 2 Light - 5 hour Run Time Li-ion Battery - MADE IN THE USA
Explosion Proof Light - Class 1 Division 2 Light - 5 hour Run Time Li-ion Battery - MADE IN THE USA Part #: RUL-9-FR Page: 1 Larson Electronics LLC Made in The USA The RUL-9-FR Hazardous Area Portable
Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital...
Dynorbital-Spirit...46 HiVac Dynorbital-Spirit...48 Mesh Abrasive Systems...49 Dynorbital Supreme...50 Two-Hand Dynorbital...52 11" Dia. Dynorbital...53 Palm-Style Mini-Orbital...54 7 Offset Mini-Orbital...55
5500 lb. Capacity Standard Hand Pallet Truck
5500 lb. Standard Hand Pallet Truck Powder coated hydraulic pump, robust and durable, with fine control of lowering speed and overload bypass valve. Polyurethane wheels: great for delicate floors with
Hydro Cut Series Walk-Behind Mowers
Parts Manual HP Product Mfg. No. Description 92 Hydro Cut, HP Kawasaki, 2 inch (CE) Hydro Cut Series Walk-Behind Mowers Rev. 0/200 Table Of Contents PRODUCT COMPONENTS PAGES Engine Deck & Handle Bars
PHONE /
WESCON DSI DESIGNED SOLUTIONS INCORPORATED AIRFRAME ASSEMBLY TOOLS AND RELATED SERVICES PHONE 949.444.3807 / info@wescondsi.com 20551 PASCAL WAY LAKE FOREST, CA 92630 USA "DESIGNED SOLUTIONS" With over
Pounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
MODEL 40508x92D REPAIR PARTS CHASSIS & HOOD
MODEL 00x9D CHASSIS & HOOD 9 9 9 9 0 MODEL 00x9D CHASSIS & HOOD Seat 90 Cap, Push 0n x Spring 90 Screw x9 Bolt, Wing 90 Washer xz Bolt, Shoulder 9x Support, Seat 9E00 9 Rod, Pivot 9 Z Bracket, Pivot 9E00
DR POWERWAGON. Parts List and Assembly Diagrams
DR POWERWAGON Parts List and Assembly Diagrams Important! Please read the Safety & Operating Instructions and the separate Engine Manufacturer's Owner's Manual to become familiar with the basic features
Kamimine Plant. Kishima Plant. Yamada Plant
Main Plant Kamimine Plant Kishima Plant Hirokawa Plant Yamada Plant TOKU PNEUMATIC CO., LTD. 34, 4Chome, Katakasu, Hakataku, Fukuoka, Japan Phone : +89243040 Fax : +8924304 email : intop@tokunet.co.jp
section section eclipse series2 vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 15
vision & style section eclipse series INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 15 No. ECL-750-KP9 Patent pending No. ECL-750-KP9
Advolution 2710 UHR
Advolution 2710 UHR 70-1700 PARTS LIST Advance MODELS 56422000, 56422002, 56422184 Nilfisk MODEL 56422001 3/06 revised 8/08 SECTION 5.9.1 06-3 TABLE OF CONTENTS Advolution 2710 / UHR 70-1700 D 5.9.1 1
Agri-Fab OWNERS MANUAL. Model No LB. PUSH BROADCAST SPREADER. Assembly Operation Maintenance Repair Parts
Agri-Fab OWNERS MANUAL Model No. 45-02103-101 SHIELD UP - 8 TO 18 FT. SPREAD WIDTH SHIELD DOWN - 3 TO 4 FT. SPREAD WIDTH 125 LB. PUSH BROADCAST SPREADER CAUTION: Read Rules for Safe Operation and Instructions
POWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps
Power Clamping Repair Kits... 213 Rotary Couplers...208 Swing Cylinder Arms... 150 Swing Cylinder Bottom Flange... 149 Swing Cylinder Top Flange... 148 Tubing, Steel... 212 Valves, Air Circuit... 202 203
Plan Binders. Plan Binders. QUICKFILE Binders
Plan Binders Plan Binders Hang-A-Plan filing systems allow large amounts of plans and drawings to be well organized and easily accessed using only a minimal amount of storage space. Hang-A-Plan systems
TOGGLE CLAMP Catalogue 1/2015 CopertinaCatalogoSB2015_EN.indd 2 18/05/
TOGGLE CLAMP Catalogue 1/2015 FEATURES (fig.1) (fig. 2) (fig. 3) (fig. 4) Using the toggle principle, the quick clamping tools have decisive advantages: The clamping lever is opened so as to completely
Series 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
Spray Guns. Choice of Materials and Capacities
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 30 to 800 PSI. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
Series 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
Technical Appendix. Manual Clamping Technology
19.1 Technical Appendix Manual Clamping Technology Selecting The Proper DE-STA-CO Clamp The information contained in this catalog is designed to help you select the right damp to accomplish your job. DE-STA-CO
Washroom Accessories Service Parts List Price Book 0514WSP
Washroom Accessories Service Parts List Price Book 0514WSP Table of Contents Hair-Hand Dryers (Models 2870 thru 2874, 2889, 2896, & 2897) 2 Hand Dryers (Models 2875-28 & 2885-28, 2877-28 & 2887-28) 3 Aerix
Strahman. Since Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories
Strahman Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories Since 1964 675 The Parkway Peterborough, ON K9J 7K2 1-800-361-5361 705-743-5361 Catalogue Strahman
Weigh Modules. Section Contents
Section Contents ITCM Isolated Tension Cell Modules...26 ITCM SS Isolated Tension Cell Modules, Stainless Steel...28 ITCM HE Isolated Tension Cell Modules, Stainless Steel, Welded-seal...30 RL50210 TA
SUPERHONE Installation * Operation * Maintenance * Replacement Parts
SUPERHONE Installation * Operation * Maintenance * Replacement Parts I.C.M., Inc. 10630 South Garfield Avenue South Gate, CA 90280-7395 Telephone: 562/869-3004 888/351-2570 Fax: 562/869-3005 Website: www.icm2000.com
Vectra On-Line 1500 Part Numbers and Prices Page 1 Vectra On-Line 1500 Part # Part Description 69020 Ab Crunch Strap 29010 Ab Swivel Pulley assembly 28100 Ab Swivel Pulley bracket- without pulley & hardware
Parts List. Model Revision 00 TP LT-R
Parts List Model 7800276 Revision 00 Rev. Date 03/2008 Table Of Contents PRODUCT COMPONENTS PAGES Steering... 4 Engine Mount... 6 Motion Drive... 8 Electrical System... 12 Chassis & Hood... 14 Decals...
Accessories may not be exactly as shown. KINGQUAD ATV LINEUP // KingQuad 750 & 500
Accessories may not be exactly as shown. KINGQUAD ATV LINEUP // KingQuad 750 & 500 FRONT BUMPERS FRONT BUMPER Strong, durable front bumper features an integrated headlight guard from maximum protection
A DIVISION OF DOUGLAS DYNAMICS, L.L.C.
April, 00 Lit. No. 0686, Rev. 05 SPEEDWING Snowplow 8600SW Snowplow Parts List A DIVISION OF DOUGLAS DYNAMICS, L.L.C. Lit. No. 0686, Rev. 05 April, 00 BLADE COMPONENTS... OFF-TRUCK COMPONENTS...5 Pivot
Parts Manual Rev. A RZT48 /
115 91 36-2 Rev. A Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%