New VikingTM3, the innovation Screw or automatic spring connection

Transcription

1 New VikingTM3, the innovation Screw or automatic spring connection EXB Headquarters LEGRAND SNC Limoges Cedex - France : Fax : A NEW RANGE, BORN OF RESEARCH & EXPERIENCE

2 INDEX Screw connection... 2 Automatic spring connection... 4 Common accessories Catalogue pages Selection table Viking CAB 3 marking and isolating sleeves For over 30 years, Legrand has produced Viking 3 screw terminal blocks in its Normandy factories for the whole world. Millions of wiring installers have used the different generations. They are constantly providing ideas for improvement which today make them a benchmark in the connection field. Viking 3 terminal blocks are the core of a reliable and easy to use connection system, toghether with CAB 3 marking system and Starfix ferrules and crimping tools. CAB 3 marking system Starfix ferrules and crimping tools Viking 3 terminal blocks and their CAB 3 marking system 1

3 NEW VIKING TM 3, THE INNOVATION Strength and security: screw connexion High contact pressure using the clamp/bar system Captive screw The other innovations Optimized size, simplified fixing and standardized end caps systems bring comfort of use for the new Viking 3 range and make installation, connection and marking easyer than ever. Excellent mechanical strength with a specially selected clamp made of surfacetreated steel (1) Clamping tried and tested for strength, pulling-out, destructive torque resistance and ageing Identical height for blocks of 16 mm 2 to 70 mm 2 Perfect electrical conduction with the tinned brass bar (1) Permissible cross-sections: 0.25 mm 2 to 70 mm 2 (flexible wire) and 0.25 mm 2 to 95 mm 2 (rigid wire) (1) Complies with RoHS (Restriction of Hazardous Substances) requirements International approvals: UL/CSA/NF/VDE/IMQ/BV ATEX certification Conforms to IEC EN , IEC EN and IEC EN Direct screwless fixing on rail for protection conductor modules (for pitches of 5 to 10) Single end caps for pitches of 5 to

4 NEW VIKING TM 3, THE INNOVATION Reliability and time saving: automatic spring connection No tool required for connection: Direct insertion (1) up to pitch of 6. Disconnection with screwdriver Constant contact pressure With or without ferrule The other innovations Actively listening to installers has resulted in Legrand's Research & Development department creating an innovative new Viking 3 spring terminal block which, over and above connection quality, has many advantages. Double central marking area Better management of wires with the inclined cable entries Permissible cross-sections: 0.5mm 2 to 16 mm 2 Integrated end caps for pitches of 6 to 12 Pasde5 (1) For a flexible wire with no ferrule, the spring is opened using a screwdriver International approvals: UL/CSA/NF/VDE/IMQ/BV ATEX certification Pas de 6 Conforms to IEC EN , IEC EN and IEC EN Bridging combs and markings are perfectly visible Optimized terminal block size. Identical electrical characteristics for blocks with a pitch of 5 and those with a pitch of 6 (one block gained every 5 blocks with a pitch of 5) 4 5

5 NEW VIKING TM 3 Screw or automatic spring: more convenient wiring and easier use thanks to common accessories. End stop: screwless fixing Managing cable shielding with dedicated accessories Addition of functions on module for equipping: standard, neutral or protected isolation, mini-circuit-breaker, automotive-type fuse, etc. Automatic-insertion bridging comb up to pitch of 8, 2 areas allowing pitch jumps Blown fuse indicator can be added at the last moment (12/48 V or 110/250 V) Possibility of either manual marking (CAB 3) and computerized (Logicab 2) 6 7

6 Viking TM 3 terminal blocks with screw connection and accessories forcoppercable NEW ELECTRICAL FUNCTION connection - 1 entry/1 outlet Connecting (p. 14) connection - 2 entries/2 outlets 2 connections on 2 levels connections on 3 levels For protection conductor (p. 14) 1 connection - 1 entry/1 outlet - metal base 1 connection - 1 entry/1 outlet - plastic base (1) connection - 2 entries/2 outlets - metal base Open (to be equipped) For fuse cartridge5x20with handle lever Disconnect (p. 15) Function blocks (p. 15) For sensor and actuator (p. 15) PNE (p. 14) Measurement (p. 15) 1 connection 1 connection 2 connections on 2 levels 3 connections on 3 levels (1)CanbeusedforprotectionconductorinsideclassIIequivalentassemblies (2)Blownfuseindicator12/24/48V=/A Cat.No37524or110/250VA Cat.No (3)OrendstopCat.No37510 For fuse cartridge5x20with handle lever + blown fuse indicator For neutral circuit with handle lever With handle lever For standard circuit With mini lever For circuit not With handle lever broken With mini lever For fuse cartridge 5x20with screwed plug Modular Diode carrier 1N4007 Diode carrier 1N4007 With voltage presence LED Sensor Actuator Phase/Neutral/Earth 1 connection Disconnect for measuring circuit (4) Upper level (5)Lowerlevelonly (6)Lowerandintermediatelevels N

7 Old range (p ) available while stocks last TERMINAL BLOCK INSULATION EQUIPOTENTIAL LINK PROTECTION MEASURE- MENT Pitch cross-section (mm) End cap Separation Comb for and insulation 2 blocks, divider auto. front Comb for 3blocks, auto. front Comb for 10 blocks, auto. front Comb for 12 blocks, side Bar for 12 blocks, front Single pole screen Cut to length screen Test socket (3) (3) (3) (3) ASSOCIATED PRODUCTS End stops (p. 18) Label holder for end stop (p. 18) built-in Handle lever mini lever (p. 19) (4) (4) (4) (4) (6) (6) (4) (3) /25 (2) Joining rods for disconnect blocks (p. 19) Blown fuse indicators (p. 19) Shielding (p. 19) CAB 3 (p. 27) (4) (5) (5) (4) (4) (6) (6) (4)

8 Viking TM 3 terminal blocks with spring connection and accessories forcoppercable NEW ELECTRICAL FUNCTION connection - 2 wires - 1 entry/1 outlet Connecting (p. 16) connection - 3 wires - 1 entry/2 outlets connection - 4 wires - 2 entries/2 outlets 2 connections - 4 wires - 2 levels For protection conductor (p. 16) 1 connection - 2 wires - 1 entry/1 outlet - metal base 1 connection - 3 wires - 1 entry/2 outlets - metal base connection - 4 wires - 2 entries/2 outlets - metal base Open (to equipped) For fuse cartridge 5 x 20 with handle lever Disconnect (p. 17) 1 connection 2 wires For fuse cartridge 5x20with handle lever + blown fuse indicator For neutral circuit with handle lever For standard With handle lever circuit With mini lever N Function blocks (p. 17) 1 connection 4 wires 2 entries/2 outlets 2 jonctions 4 conducteurs 2 étages For circuit not broken Diode carrier 1N4007 Diode carrier 1N4007 With handle lever With mini lever With voltage presence LED (1)Blownfuseindicator12/24/48V= /A Cat.No37524or110/250VA Cat.No37525 (2)Lowerlevelonly (3)Upperlevelonly 10

9 Old range (p ) available while stocks last TERMINAL BLOCK INSULATION EQUIPOTENTIAL LINK MEASUREMENT cross-section Pitch (mm) End cap Separation and insulation divider Comb for 2 blocks Comb for 3 blocks Comb for 10 blocks Test socket built-in built-in built-in built-in built-in built-in (3) built-in (3) built-in built-in built-in ASSOCIATED PRODUCTS End stops (p. 18) Label holder for end stop (p. 18) Handle lever mini lever (p. 19) Joining rods for disconnect blocks (p. 19) Blown fuse indicators (p. 19) Shielding (p. 19) /25 (1) CAB 3 (p. 27) (2) (2) 11

10 Viking TM 3 power terminal blocks ELECTRICAL FUNCTION Cable - cable Cable lug - Cable lug TERMINAL BLOCK Max. Pitch connection (mm) Rail 3 Rail 1 INSULATION EQUIPOTENTIAL LINK Separation and insulation divider Shunt PROTECTION Cover Cover 4 blocks 3 blocks ASSOCIATED PRODUCTS CAB 3 (p. 27) Power terminal blocks (p. 24) Cable lug - Cable Cable - Cable lug For busbars or eyelets (1) (1) (1) (1) (1) Available March 2009 old range: Viking TM 3 terminal blocks and accessories and equivalences between old/new range Old range available while stocks last SCREW CONNECTION Standard capacity TERMINAL BLOCKS Pitch (mm) (old range) (new range) connection connection - 1 ent. - 2 out connections - 2 levels connections - 3 levels V.O. - UL 94 1 connection Function blocks Disconnect 2 connections 2 levels 1 connection 2 connections 2 levels Shunted Diode carrier With voltage presence LED Blade type Neutral equipped For cartridge 5x20 For cartridge 5x (1) SCREW CONNECTION (CONTINUED) For neutral conductor TERMINAL BLOCKS capacity Pitch (mm) (old range) (new range) connection connections - 2 levels For circuit 1 connection not broken 1 disconnect connection For sensor/ actuator PNE For special circuits For protection conductor 3 connections 3 levels Sensor/power supply unit Actuator/power supply unit Phase/Neutral/Earth connection - red connection - red connection - white connection - white connection - brown connection - brown connection - purple connection - purple connection - Metal base connections - 2 levels - Metal base connection - Plastic base connection - Metal base - bare terminal (1) With blown fuse indicator (neon bulb 230 VA) 12

11 old range: Viking TM 3 terminal blocks and accessories and equivalences between old/new range (continued) Available while stocks last SPRING CONNECTION Standard For neutral conductor 2 wires 1 connection 3 wires 1 ent. - 2 out. 4 wires 1 ent. - 3 out. 2 connections 4 wires 2 levels 2 wires 1 connection 3 wires 1 ent. - 2 out. 4 wires 1 ent. - 3 out. 2 connections 2 levels Disconnect 1 connection 2 wires TERMINAL BLOCKS capacity Pitch (mm) (old range) (new range) wires Blade type for cartridge 5x / Diode carrier 1 connection 4 wires Pour conducteur de protection END STOPS 1 connection 2 wires 3 wires 1 ent. - 2 out wires 1 ent. - 3 out connections 2 levels 4 wires (old range) (new range) 12 pitch end stop, tri-rail pitch end stop, rail pitch end stop, rail pitch high end stop stop pitch stop, bar support Discover the new Viking 3 terminal blocks with screw and spring connection see p. 14 SCREW CONNECTION ACCESSORIES End cap Equipotential bridging comb (continued) Block with 1 connection - pitch Pitch 5-3blocks Block with 1 connection - pitch Pitch 6-3blocks Block with 1 connection - pitch Sens./act. - pitch 5-blue-12blocks Block with 1 connection 1 ent./2 out. - pitch Sens./act. - pitch 5 - brown - 12 blocks Block with 2 connections - pitch Sens./act. - pitch 5 - green - 12 blocks Sensor/actuator block - 3 connections /52 Equipotential bridging bar Block with 1 connection V.O. - UL 94 - pitch Insulated - pitch 5-12 blocks Block with 1 connection V.O. - UL 94 - pitch Insulated - pitch 6-12 blocks Block with 1 connection V.O. - UL Insulated - pitch 8-12 blocks - pitch Disconnect terminal - 1 connection Insulated - pitch 5-2blocks /86/ Insulated - pitch 6-2blocks Disconnect terminal - 1 connection Cat.No Insulated - pitch 5-3blocks Disconnect terminal - 2 connections Cat.No Insulated - pitch 6-3blocks Neutral block - 1 connection - pitch Bare - pitch blocks Neutral block - 1 connection - pitch Bare - pitch blocks Neutral block - 1 connection - pitch Bare - pitch blocks Neutral block - 2 connections - pitch Block for circuit not broken Bare - pitch blocks - low spacer 1 connection / Bare - pitch blocks - low spacer connection Cat.No Block for circuit not broken Bare - pitch blocks - low spacer Block for cond. protection - 2 connections Cat.No Protective screen Block for cond. protection - 1 connection Cat.No Single pole for block with 1 connection - pitch Block for cond. protection - 1 connection Cat.No Single pole for block with 1 connection - pitch 8-10 Separation/insulation divider Single pole for block with 1 connection - pitch Block with 1 connection pitch and disconnect. pitch Cut to length - pitch (on Cat.No ) Blocks with 2 connections pitch Cut to length - pitch Blocks with 1 connection pitch (on Cat.No ) and disconnect. pitch 8 Miscellaneous Blocks with 3 connections pitch 5 Screening continuity bracket for Separation barriers for bars with 1 connection blocks - pitch connection - pitch Protection cap for separable combs/ Equipotential bridging comb bars - pitch Pitch 5-12blocks Joining rod for 2 disconnect blocks Pitch 6-12blocks Joining rod for 3 disconnect blocks Pitch 8-12blocks Joining rod for 4 disconnect blocks Pitch 5-2blocks Test socket for block pitch Pitch 6-2blocks Test socket for block pitch SPRING CONNECTION ACCESSORIES End cap Separation/insulation divider Std term. block - 2 wires - pitch Block with 2 wires - pitch Std term. block - 3 wires - pitch Block with 3 wires - pitch Std term. block - 3 wires - pitch Block with 3 wires - pitch Std/diode term. block - 4 wires - pitch Block with 4 wires - pitch Std term. block - 4 wires - 2 levels - pitch Block with 4 wires -2levelspitch Stdterm.block-4wires-2levels-pitch Block with 4 wires -2levelspitch Neutral term. block - 2 wires - pitch 5-6 Equipotential bridging comb Neutral term. block - 3 wires - pitch Block - pitch 5-2poles Neutral term. block - 3 wires - pitch Block - pitch 5-3poles Neutral term. block - 4 wires - pitch Neutral term. block - 4 wires -2levelspitch Block - pitch 5-10poles Block - pitch 6-2poles Disconnect term. block -2wires - pitch Block - pitch 6-3poles Protection cond. term. block - 2 wires - pitch Block - pitch 6-10poles Protection cond. term. block - 3 wires - pitch Block - pitch 8-2poles Protection cond. term. block - 3 wires - pitch Block - pitch 10-2 poles Protection cond. term. block - 4 wires - pitch Block - pitch 12-2 poles Protection cond. term. block - 4 wires - 2levels-pitch6 13

12 terminal blocks with screw connection Viking TM 3 NEW on rail Technical characteristics (p. 20) Usedtomaketheelectricalconnectionbetween2rigidorflexiblecopperwires 2areasforbridgingcombsforalternatingequipotentialconnectionupto8pitch For rails 2 depth15mm,2 EN60715depth7.5mmand15mm Pack Connecting Grey Blue Orange Red Grey Blue Orange Red Grey Greyforstandardcircuit,blueforneutral conductor, orange for circuit not broken by the master isolating device, red for special circuits (safety, protected, etc) 1connection-1entry/1outlet Capacity cross-section Rigid wire (mm²) Flexible wire Pitch (mm) to4 0.25to to6 0.25to to to Blue Grey Blue to to Grey Blue to25 4to Grey Blue to50 4to (1) Grey to to connection-2entries/2outlets Grey to6 0.25to Blue 2connectionson2levels Grey to4 0.25to Blue Grey to6 0.25to Blue 3connectionson3levels (2) Grey to4 0.25to2.5 5 Pack Forprotectionconductor 1connection-1entry/1outlet-metalbase Screwless fixing on rail up to 10 mm pitch PENfrom10mm 2 Capacity crosssection (mm²) Rigid wire Flexible wire Pitch (mm) Green/yellow to4 0.25to Green/yellow to6 0.25to Green/yellow to to Green/yellow to16 2.5to Green/yellow to25 4to Green/yellow to50 4to connection-bareblock-metalbase to50 4to connection-2entries/2outletsmetal base Screwless fixing on rail Green/yellow to6 0.25to4 6 1connection-1entry/1outlet-plasticbase Canbeusedforprotectionconductorinside classiiequivalentassemblies Green to6 0.25to Green 6 0.5to to6 8 PNE-Phase/Neutral/Earth 3connectionson3levels-metalbase Green/yellowmarkingforthelowerlevel Screwless fixing on rail Capacity cross-section (mm²) Rigid wire Flexible wire Pitch (mm) (2) Grey to4 0.25to2.5 5 CAB 3 marking system 14 voir p. 27 (1)Built-in end cap (2)Wirecapacity:2.5mm 2 max. with equipotential bridging comb

13 terminal blocks with screw connection Viking TM 3(continued) NEW automotive-type fuse Technical characteristics (p ) Usedtomaketheelectricalconnectionbetween2rigidorflexiblecopperwires 2areasforbridgingcombsforalternatingequipotentialconnectionupto8pitch For rails 2 depth15mm,2 EN60715depth7.5mmand15mm Pack Disconnect terminal blocks 1 connection Disconnectionbymeansofbladetypelever,handle leveror minilever(withtool) Open (to be equipped) Cantakeablade-typeautomotivefuseoraminiature circuit-breaker, or blade type levers /16/17/18 crosssection (mm²) New Starfix crimping tools voir p. 30 Capacity Rigid wire Flexible wire Grey to to2.5 6 Forfusecartridge5x20withhandlelever Grey to to2.5 6 Forneutralcircuitwithbluehandlelever Grey/blue to to2.5 6 Pitch (mm) Forstandardcircuitwithhandlelever Grey to to2.5 6 Forstandardcircuitwithminilever Grey to to2.5 6 Forcircuitnotbrokenwithhandlelever Circuitnotbrokenbythemasterisolatingdevice Orange to to2.5 6 Forcircuitnotbrokenwithminilever Circuitnotbrokenbythemasterisolatingdevice Orange to to2.5 6 Forcartridge5x20withscrewedplug Grey to to Forcartridge6.3x32withscrewedplug Grey to to Blade type levers joining rods and blown fuse indicators (p. 19) Pack Function blocks 1connection-modular Component connected with screws Capacity cross-section (mm²) Rigid wire Flexible wire Pitch (mm) Grey to4 0.25to connection-diodecarrier Grey to4 0.25to connectionson2levels-diodecarrier Grey to6 0.25to4 6 2connectionson2levels-withLED Voltagepresenceindicator(12/24V= et A) Grey to6 0.25to4 6 For sensors and actuators Forconnectingsensors(Cat.No37151)oractuators (Cat.No37152),andtheirsharedpowersupplyunit usingequipotentialbridgingcomb37546/47 (wiring principe p. 21) 3connectionson3levels-forsensor Capacity cross-section (mm²) Rigid wire Flexible wire Pitch (mm) (1) Grey to4 0.25to connectionson3levels-foractuator Green/yellowmarkingforthelowerlevel Metal base. Screwless fixing on rail (1) Grey to4 0.25to2.5 5 Disconnect for measurement 1connection With its accessories, allows intervention (measurements,maintenance,etc)onacurrent, voltage and power measuring circuit by keeping the current transformer secondary circuit closed Capacity cross-section (mm²) Rigid wire Flexible wire Pitch (mm) Gris to4 0.25to4 8 Accessories (p. 18) End stops (p. 18) (1)Rigidwirecapacity:2.5mm²maxwithequipotentialbrigdingcomb 15

14 terminal blocks with spring connection Viking TM 3 NEW Automatic insertion of bare wire with ferrule cap or rigid wire up to pitch of 6 mm Automatic fixing on rail Technical characteristics (p. 22) Screwlessconnectionsystem,stainlesssteelspringtype Usedtomaketheelectricalconnectionbetween2rigidcopperwires,orflexiblewireswithorwithoutferrules(p.30) Directtool-freeinsertionofarigidwireorflexiblewirewithferrule,upto6mmpitch 2areasforbridgingcombsforalternatingequipotentialconnection For rails 2 depth15mm,2 EN60715depth7.5mmand15mm Pack Connecting Greyforstandardcircuit,blueforneutralconductor, orange for circuit not broken by the master isolating device 1connection-2wires-1entry/1outlet crosssection (mm²) Rigid wire Capacity Flexible wire Flexible wire with ferrule Pitch (mm) Grey Blue to to to Orange (1) Grey (1) Blue to to to (1) Orange (1) Grey (1) Blue to to to (1) Grey (1) Blue to to to (1) Grey (1) Blue 16 4to16 4to16 4to connection-3wires-1entry/2outlets Grey Blue Orange (1) Grey to to to to to to (1) Blue 1connection-4wires-2entries/2outlets Grey Blue to to to (1) Grey (1) Blue to to to 4 6 2connections-4wires-2levels Grey Blue (1) Grey (1) Blue to to to to to to 4 6 Pack Forprotectionconductor Metal base Screwless fixing on rail PENfrom10mm 2 1connection-2wires-1entry/1outlet Capacity crosssection (mm²) Rigid wire Flexible wire Flexible wire with ferrule Pitch (mm) Green/ yellow to to to (1) Green/ yellow to to to (1) Green/ yellow to to to (1) Green/ yellow to to to (1) Green/ yellow 16 4to16 4to16 4to connection-3wires-1entry/2outlets Green/ yellow to to to (1) Green/ yellow to to to 4 6 1connection-4wires-2entries/2outlets Green/ yellow to to to (1) Green/ yellow to to to 4 6 CAB 3 marking system voir p (1)Built-inendcap

15 terminal blocks with spring connection Viking TM 3(continued) NEW with automotive-type fuse open with blown fuse indicator (p. 19) Technical characteristics (p. 22) Screwlessconnectionsystem,stainlesssteelspringtype Usedtomaketheelectricalconnectionbetween2rigidcopperwires,orflexiblewireswithorwithoutferrule(p.30) Directtool-freeinsertionofarigidwireorflexiblewirewithferrule,upto6mmpitch 2areasforbridgingcombsforalternatingequipotentialconnection For rails 2 depth15mm,2 EN60715depth7.5mmand15mm Pack Disconnectterminalblocks1connection- 2wires Disconnectionbymeansofbladetypelever,handle leverorminilever(withtool) Open (to be equipped) Cantakeablade-typeautomotivefuseoraminiature circuit-breaker, blade type levers /16/17/18 crosssection (mm²) Capacity Flexible wire Flexible wire with ferrule Rigid wire Grey to to to Forfusecartridge5x20withhandlelever Grey to to to Forneutralcircuitwithbluehandlelever Grey/blue to2.50.5to2.50.5to2.5 6 Pitch (mm) Forstandardcircuitwithhandlelever Grey to to to Forstandardcircuitwithminilever Grey to to to Forcircuitnotbrokenwithhandlelever Circuitnotbrokenbythemasterisolatingdevice Orange to to to Forcircuitnotbrokenwithminilever Circuitnotbrokenbythemasterisolatingdevice Orange to to to Pack Function blocks 1connection-4wires-2entries/2outletsdiode-carrier Capacity crosssection (mm²) Rigid wire Flexible wire Flexible wire with ferrule Pitch (mm) Grey to to to connections-4wires-2levels-diodecarrier Grey to to to connections-4wires-2levels-withLED Voltagepresenceindicator(12/24V= et A) Grey to to to Accessories (p. 18) End stops (p. 18) Blade type levers, joining rods and blown fuse indicators (p. 19) New Starfix crimping tools voir p

16 accessories for terminal blocks Viking TM 3 Automatic bridging combs Cat. No to for terminal blocks with screw or spring connection Equipotential bars Cat. No /42/44 for terminal blocks with screw connection Bridging combs Cat. No /47 for 3 level terminal blocks with screw connection End stop , screwless mounting with label holder with CAB 3 labelling Technical characteristics (p. 23) with label holder Duplix CAB 3 markers Markers Cat. No /01/02 for Logicab 2 flattbed plotter Markers Cat. No /44 for Logicab 2 printer CAB 3 label holders Cat. No for terminal blocks with scew connection 18 Pack Railsforcuttingtolength Length2m EN60715depth7.5mm depth15mm depth7.5mmwithoblongholes depth15mmwithoblongholes 45 mounting bracket Setof2supportsfortiltingarail at an angle of 45 Suppliedwith4xM6screws,nutsanwashers End stops AcceptCAB3markers Automatic 6 mm pitch Screwless mounting For rails 4 depth 15 mm and 4 EN depth7.5mmand15mm Accepts label holder Cat.No Actsasendcapforscrewterminalblocks 1entry/1outlet5,6,8and10mmpitch 8mmpitch For rails 4 depth 15 mm and 4 EN depth7.5mmand15mm Accepts label holder Cat.No mm pitch For rails 4 depth 15 mm and 4 EN depth 7.5mm(exceptforrailfixedonplate)and15mm Forsupportingprotectionconductorbar: -Brassbar37300/01 -Copperbar12x4mmwithclampsCat.No IP2Xterminalblockwithflatsteelbar12x2mm Cat.No Copperbar12x4mmCat.No37349or Shieldingbar10x3mmCat.No mm pitch For rails 1 EN 60715, 4 depth 15 mm and 4 EN60715depth7.5mmand15mm Aftercuttingouttheupperdivider,canbelabelled usingcat.no38498 Identification accessories Transparent label holder with variable angle Fixingonendstops37510/11 Suppliedwithlabel32x9.5mm CantakelabelCat.No Labelforengraving28x9.5mm ForlabelholderCat.No39596.FlexibleABS White background, black engraving Blackfelttippen permanent for marking Pack End caps Grey For screw terminal blocks entry/1outlet5,6,8and10mmpitch entry/1outlet12and15mmpitch entries/2outlets levels levels Disconnectterminal6mmpitchandfunctionblocks 5mmpitch Disconnectterminalfusecartridge5x20with screwed plug Disconnect for measurement Forspringterminalblockswith5mmpitch Allowstheblocktobecome6mmpitchandtake aflexiblewirefittedwithaferrule 4mm entry/1outlet entry/2outlets entries/2outlets levels Forspringterminalblockswith6mmpitch Disconnect type Separation and insulation dividers Grey For screw terminal blocks entry/1outlet5,6,8and10mmpitch entry/1outlet12and15mmpitch entry/2outletsanddisconnect 6mmpitchblocks levels levels Forspringterminalblocks entry/1outlet,1entry/2outletsand 2entry/2outlets5and6mmpitch levels Equipotential bridging accessories Brigding combs for screw and spring terminal blocks Frontmounting(automaticinsertion),screwless Isolatedandseparable.Consecutiveor alternating connection. Red (1) For10blockswith5mmpitch (1) For2blockswith5mmpitch (2) For10blockswith6mmpitch (2) For2blockswith6mmpitch (3) For3blockswith8mmpitch (3) For2blockswith8mmpitch (1)Blocks37151/52:upperlevelonly BlockCat.No37256:lowerlevelonly (2)BlockCat.No37156:lowerlevelonly (3)ExceptforCat.No37192

17 accessories for terminal blocks Viking TM 3(continued) Shielding terminal block with end stops , bar and clamps / open Technical characteristics (p. 22) Emb. Réf. Equipotential bridging accessories (continued) Bars for screw terminal blocks Frontmountingwithscrews.Pre-assembled Consecutiveoralternatingconnection For12blockswith10mmpitch (1) For12blockswith12mmpitch For12blockswith15mmpitch Bridgingcombsfor3-levelscrewterminalblocks Forlowerandintermediatelevelsofblocks /52. Side mounting Isolated and separable Brown.For12blockswith5mmpitch Blue.For12blockswith5mmpitch Bridging combs for spring terminal blocks Frontmounting(automaticinsertion),screwless Isolated. Red For2blockswith10mmpitch For2blockswith12mmpitch Accessories for disconnect blocks Forscrewandspringterminalblocks Bladetypelevers Foropenblocks37180and37280 Manualdisconnectionforhandletype,toolrequired forminilevertype 10/ Withhandleleverforfusecartridge5x20 10/ Blue handle lever for neutral 10/ Grey handle lever 10/ Mini lever Joining rods Forhandleandminilever For2blocks For3blocks Blownfuseindicators Clip directly onto blocks , 37281orhandlelever37515(withpoweroff) 10/ /24/48 V= and A for block with fusecartridge5x20withhandlelever 10/ /250 VA for block with fuse cartridge 5x20withhandlelever Shielding accessories Ensuresafe,simpleconnectionofcableshielding Shielding clamps Forscrewandspringterminalblocks - mounted by pivoting on collector bar 10x3mmCat.No mountedonplatewithm4screws(supplied) -mountedonrail4with Cat.No Forcablediam.3to8mm Forcablediam.4to13.5mm Forcablediam.10to20mm Emb. Réf. Shielding accessories (continued) Ensuresafe,simpleconnectionofcableshielding Shielding bar Forscrewandspringterminalblocks.Steel.Length 1m.ForusewithendstopsCat.No x3mm Screeningcontinuitybracket Forscrewterminalblocks1entry/1outlet 5,6,8and10mmpitch Connectedwith2.8x0.8mmclips orweldedon.capacity:1mm 2 Protective screens 1 pole Forscrewterminalblocks1entry/1outlet and6mmpitch and10mmpitch and15mmpitch Cuttolength Length1m Mountedonseparationandinsulationdivider Forscrewterminalblocks1entry/1outlet ,6,8and10mmpitch (divider Cat.No ) and15mmpitch (divider Cat.No ) Measurement accessories Forscrewandspringterminalblocks (2) Measurement socket for Ø4 mm plug forblockswith5and6mmpitch For screw terminal blocks Measurement socket for Ø2 mm plug forblockswith10mmpitch37103/ Measurement socket for Ø4 mm plug forblockswith12and15mmpitch /05/64/ Measurement socket for Ø4 mm plug fordisconnectblockformeasurementcat.no37192 IP 2X safety tip adaptor 1/ Ø2mmtestplug-Retractabletube Forperformingad-hoctestsinaccordance withregulationsontheprotectionofworkers FixesdirectlyontheØ4mmplug (1)ExceptforCat.No37187 (2) Except for disconnect blocks with handle lever, screw terminal blockwithledandspringfunctionblocks.2and3-levelterminal blocks: upper level only 19

18 terminal blocks with screw connection Viking TM 3 Characteristics and dimensions (mm) V2 polyamide according to UL 94, 960 C according to IEC EN Connecting blocks Voltage (V) Current (A) cross-section IEC CSA UL Ie IEC CSA UL IEC CSA UL (AWG) (AWG) /20/30/ /21/31/ / / / / / / / Cat.No : see blocks for sensors IEC , CSA no no. 158, UL 1059 Ie: Rated current NF C table 52H, column /01/02/ 03/20/21/30/31/60/61/ 62/63/77/ /05/64/ Cat.No Blocks for protection conductor Voltage (V) cross- section IEC CSA UL IEC CSA (AWG) UL (AWG) (1) (1) (1) IEC /7-2, CSA no no. 158, UL 1059 (1) PEN terminal blocks /71/72/ / / Cat.No Cat.No / Approved by ATEX: LCIE 07 ATEX 0010 U /08/67/ II 1 or 2 G or D Ex e/i/td/id II The terminal blocks with screw connection covered by this certificate are 1-, 2- and 3-level connecting terminal blocks, and blocks for protection conductor with metal (1) and plastic base (detailed list on p. 8) The main characteristics are: Operating temperature: - 30 C to + 55 C Maximum temperature of materials: + 85 C Working voltage acc. to EN : 1-level terminal blocks: 500 V Blocks with 2 entries - 2 outlets: 250 V 2 and 3-level terminal blocks: 250 V Rated current: Conductor 2.5 cross-section Rated current (A) Attestation of conformity of component for the customer is available on request (1) Except for Cat.No Disconnect terminals ou IEC /7-3, CSA no no. 158, UL 1059 Power according to EN (1): With or without blown fuse indicator Cat.No Cat.No Voltage (V) /82/83/ / Current (A) IEC CSA UL IEC CSA UL cross- section IEC CSA (AWG) 71.2 UL (AWG) Short-circuit Short-circuit + overload Separate blocks Assembled blocks Separate blocks Assembled blocks or 4 W / 6.3 A 1.6 W/6.3 A 1.6 W/6.3 A (1) Pvk = 4.75 W Pvk =2W Pv=1.65 W W 2.5 W 1.6 W - Pvk=5W Pvk=2.7W Pv=1.8W Cat.No

19 Function blocks to to to IEC , CSA no no. 158, UL / Schematic diagrams Cat.No Voltage (V) Current (A) cross- section IEC CSA UL IEC CSA UL / Cat.No IEC CSA (AWG) Cat.No UL (AWG) Block for actuator Cat.No PNE block Cat.No To Phase actuators Neutral Signal Signal Automation Bridging comb Cat.No Disconnect block for measurement IEC EN Cat.No common Voltage (V) Current (A) cross- section IEC CSA UL IEC CSA UL IEC CSA UL (AWG) (AWG) Cat.No Diode for /55-1N4007 type 1A - direct current = 1A - peak inverse voltage 1000 V - inverse current 5 µa at 25 C Wiring principle for measurement blocks Cat.No Ammeter circuit Wattmeter circuit Blocks for sensors and actuators/pne Voltage (V) Current (A) cross- section IEC CSA UL Ie IEC CSA UL IEC CSA UL (AWG) (AWG) IEC /7-2, CSA no no. 158, UL 1059 Ie: Rated current NF C table 52H, column /52 Wiring principle Block for sensor Cat.No Signal 84.5 Automation Bridging comb Cat.No Power supply or Ph - N Signal Sensors Power supply (shared) Normal position Test position Stripped lengths (mm) Short-circuit position Per circuit: 2 x Disconnect blocks for measurement Cat.No x Measurement sockets for Ø4 mm plug Cat.No x End cap Cat.No x Shunt with Ø4 mm plugs L1 L2 L3 N PE Screw terminal pitch (mm) Rigid or flexible wire 5 6 6to to to to to x Disconnect blocks for measurement Cat.No x Measurement sockets for Ø4 mm plug Cat.No x End cap Cat.No x Shunts with Ø4 mm plugs Protection against fire and panic risks in public buildings/ute C guide Art. EL 3, definitions: "Security installations are those that have to be put into or maintained in service to ensure the evacuation of the public" or facilitate the intervention of the first-aid Art. EL 16, power supply circuits in security installations section 1a: " the corresponding junction or deviation devices and their enclosures except for the waterproofing systems must satisfy the incandescent wire test defined in the standard in force, the temperature of the incandescent wire being 960 C" Viking 3 terminal blocks satisfy the incandescent wire test 960 C according to standard IEC

20 terminal blocks with spring connection Viking TM 3 Characteristics and dimensions (mm) V2 polyamide according to UL 94, 960 C according to IEC EN Connecting blocks Voltage (V) Current (A) cross- section IEC CSA UL Ie IEC CSA UL IEC CSA UL (AWG) (AWG) IEC , CSA no no. 158, UL 1059 Ie: Rated current NF C table 52H, column IEC , CSA no no. 158, UL 1059 (1): PEN terminal blocks Voltage (V) Current (A) cross- section IEC CSA UL IEC CSA UL IEC CSA UL (AWG) (AWG) to to to IEC , CSA no no. 158, UL /01/20/ 21/60/61/70/ /64/ Voltage (V) cross- section IEC CSA UL IEC CSA (AWG) UL (AWG) /62/ /11/40/ 41/42/43/ Blocks for protection conductor (1) (1) Function blocks /63/ /12/46/ 47/54/69/ Cat.No IEC /7-3, CSA no no. 158, UL 1059 Cat.No Cat.No /82/83/ Cat.No Schematic diagrams Diode for /55-1N4007 type 1A - direct current = 1A - peak inverse voltage 1000 V - inverse current 5 µa at 25 C Approved by ATEX: LCIE 07 ATEX 0010 U-0081 II1or2GorDExe/i/tD/iD II The terminal blocks with spring connection covered by this certificate are 1- and 2-level connecting terminal blocks, and blocks for protection conductor with metal base (detailed list on p. 10) The main characteristics are: Operating temperature: - 30 C to + 55 C Maximum temperature of materials: + 85 C Working voltage acc. to EN : 1-level terminal blocks: 500 V Blocks with 2 entries - 2 outlets: 500 V 2-level terminal blocks: 250 V Rated current: Conductor cross-section Rated current (A) Attestation of conformity of component for the customer is available on request Disconnect blocks Voltage (V) Current (A) cross- section IEC CSA UL IEC CSA UL IEC CSA UL (AWG) (AWG) or Power according to EN Short-circuit Short-circuit + overload Separate blocks Assembled blocks Separate blocks Assembled blocks ou 4 W / 6.3 A 1.6 W / 6.3 A 1.6 W / 6.3 A (1) Pvk = 4.75 W Pvk =2W Pv=1.65 W - (1): With or without blown fuse indicator Cat.No /08/55/56/67/ Cat.No /

21 accessories for terminal blocks Viking TM 3 Stripped lengths (mm) Spring terminal pitch (mm) Rigid or flexible wire 5 6 8to to to15 Protection against fire and panic risks in public buildings/ute C guide Art. EL 3, definitions: "Security installations are those that have to be put into or maintained in service to ensure the evacuation of the public" or facilitate the intervention of the first-aid Art. EL 16, power supply circuits in security installations section 1a: " the corresponding junction or deviation devices and their enclosures except for the waterproofing systems must satisfy the incandescent wire test defined in the standard in force, the temperature of the incandescent wire being 960 C" Viking 3 terminal blocks satisfy the incandescent wire test 960 C according to standard IEC Characteristics and dimensions (mm) End stops Cat.No Cat.No Cat.No Cat.No End caps Thickness (mm) Shielding clamps Mounting on bar 10x3Cat.No Separation and insulation dividers Thickness (mm) Mounting on rail with accessory Cat.No Equipotential bridging combs/bars Cross-section Mounting on plate A B C M4 D A B C D

22 Viking TM 3 power terminal blocks With CAB 3 and Duplix marking (interior view) Possibility of sealing Direct connection Al/Cu Pack Forcopperandaluminiumcables Bridgingthegapbetweentheenclosureand external cables Fixedusingmetalclipforrails4 15 mm depth and 4 EN60715,15mmdepthoronplatewithscrews Fitted with covers with cut-outs PermitstheuseofCab3,Duplixmarkers TestviatestplugØ4 closedcovers Blockswithidenticalpitchcanbejoinedusing athreadedrod Supportsshuntwith39446/47 Cable/cable Rigidorflexible connecting cable (mm²) Rigid or flexible connecting cable (mm²) Pitch (mm) Al/Cu35to120 Cu35to Al/Cu70to300 Cu70to Terminal for cable lug/terminal for cable lug Connecting plate max. (mm²) Connecting plate max. (mm²) Pitch (mm) Al/Cu95 Al/Cu Al/Cu 150 Al/Cu Al/Cu 300 Al/Cu Terminal for cable lug/cable Rigid or flexible Connecting plate max. (mm²) connecting cable (mm²) Pitch (mm) Al/Cu150 Cu35to Al/Cu300 Cu70to Cable/terminal for cable lug Rigidorflexible connecting cable (mm²) Connecting plate max. (mm²) Pitch (mm) Cu35to120 Al/Cu Al 35 to Cu70to300 Al 70 to 300 Al/Cu 70 Al/Cu 300 Al/Cu 150 Accessoriesforpowerterminalblocksfor copper and aluminium cables Shunt Forblockswithpitch36and42mm Forblockswithpitch55mm 55 Pack Platepowerterminalblocks Available March 2009 Bridgingthegapbetweentheenclosureand external cables Forbrasorlugs.Plasticfoot For use with terminal marker sheets For symmetrical rails Fixedusingmetalclipon rails4 15 mm depth and 4 EN 60715, 15 mm depth Connecting max. (mm²) Widthofplate (mm) ScrewØ Pitch(mm) M M M M Forasymmetricalrails Fixedusingmetalcliponrails1 EN M M M M Accessories for plate power terminal blocks Separation barriers Take protective covers MarkingpossiblewithCAB Forterminalswithpitch26mm Forterminalswithpitch34and46mm Protective covers Formountingonseparationbarriers For3terminalswithpitch46mm orfor4terminalswithpitch34mm For4terminalswithpitch26mm For4terminalswithpitch46mm End stops (p. 19) 24

23 Viking TM 3 power terminal blocks Characteristics of power terminal blocks for copper and aluminium cables IK 04 Conform to IEC , EN UL 1059 and 486 E - CSA 22-2 Fire resistant IEC : 960 C (except cover) V2 according to UL 94 Insulation voltage Ui: 1000 V Impulse voltage Uimp: 12 kv Insulating material: - polyamide body - 30 C to C - polypropylene cover -25 C to C Cable section quivalence table mm AWG Dimensions (mm) F B A min. A max. A B' G H Connection table E C D Connection Width of Screw Connection Width of Screw Pitch plate (mm) Ø plate (mm) Ø (mm) Cable - Cable Cu/Al: Rigid or 35 flexible to 120 Rigid Cu: 35 or flexible to Cu/Al: Rigid or 70 flexible to 300 Rigid Cu: 70 or to flexible Terminal for cable lug - Terminal for cable lug Cu/Al: max M 8 Cu/Al: max M Cu/Al: max M 10 Cu/Al: max M Cu/Al: max M 12 Cu/Al: max M Terminal for cable lug - Cable Cu/Al: max M 10 Rigid or flexible Cu: 35 to Cu/Al: max M 12 Rigid Cu: 70 or to flexible Cable - Terminal for cable lug Rigid or flexible Cu: 35 to 120 Cu/Al: max M Al: 35 to 120 Cu/Al: max M Rigid or flexible Cu: 70 to 300 Cu/Al: max M Al: 70 to 300 Cu/Al: max M Cable - cable Terminal for cable lug - terminal for cable lug A max. A min. B C D E F G H /14/17/ /15/18/ Characteristics of plate power terminal blocks Voltage (V) Intensity (A) IEC IEC / / / / Dimensions (mm) A IEC EN Fire resistance: 960 C, IEC EN V2 according to UL 94 Insulating material: polyamide - 30 C to C B Terminal for cable lug - cable Cable - terminal for cable lug Currents table Current (A) Short-circuit Tightening torque current (ka) (Nm) Pitch Shunted I/O (mm) input currents Shunted I/O Site Factory IEC IEC CSA UL input Cable - Cable Terminal for cable lug - Terminal for cable lug Terminal for cable lug - Cable Cable - Terminal for cable lug Shunts max max /32/33/34 A B B' C M M M M M M M M Separation barriers Dimensions (mm) B A C /78 A B ép C /72/73/74 ATEX Agreements: LCIE 02 ATEX 0039 U-0081 II2or1GExe/iII Products covered by this certificate are plate power terminal blocks: Main characteristics: Operating temperature: - 30 C to 55 C Max. temperature of materials: 85 C Working voltage acc. to EN : 660 V Rated current: Conductor cross section Rated current I (A) Attestation of conformity of component for the customer is available on request within group certification database 25

24 CAB 3 TM marking and isolating sleeves CAB 3 TM marking and isolating sleeves Characteristics Material PA 6.6 Installation temperature: - 5 C to + 40 C Operating temperature: - 25 C to C Storage temperature: - 40 C to + 70 C Incandescent wire test: 960 C Dielectric cross resistance: 6KV NEW For colour-marking cables and isolating lug tubes from 10 mm 2 to 300 mm 2 Fitting and removal without tool before or after connection Pack Sleeves Conductor Ø7.1 to 10.5 mm Cross-section 10 to 25 mm 2(1) Length (mm) blue black brown red yellow yellow/green Conductor Ø10 to 13.5 mm Cross-section 25 to 50 mm 2(1) Length (mm) blue black brown red yellow yellow/green Conductor Ø13 to 17 mm Cross-section 50 to 95 mm 2(1) Length (mm) blue black brown red yellow yellow/green Conductor Ø16.5 to 23 mm Cross-section 95 to 185 mm 2(1) Length (mm) blue black brown red yellow yellow/green Conductor Ø22.5 to 29 mm Cross-section 185 to 300 mm 2(1) Length (mm) blue black brown red yellow yellow/green Dimensions (mm) B A Installation C Example of use Example of use of sleeve Cat.No on a power terminal block Supplied in dispenser box Cat.No A ØB ØC to to to to to Use of a sleeve on a wired DPX 250 (1) The values for cable cross section are just an example, the real values are depending on lugs and cable type 26

25 CAB 3 TM marking system for wiring and Viking 3 terminal blocks marking label sheets for Viking 3 terminal blocks on Viking 3 terminal blocks Same markers for cable and terminal blocks Strips of 20 markers For marking wiring or Viking 3 terminal blocks Pack Markers for wiring 0.5 to 1.5 mm 2 cross-section and terminal blocks Numbers: black on white background (available in black on yellow background on request) to to to to to Blank Markers for wiring 1.5 to 2.5 mm 2 cross-section and terminal blocks Numbers: black on white background (available in black on yellow background on request) to to to to to Blank Pack Blank markers Displayed by sheet of 100 pre-cut markers Manual marking or via Logicab For blocks 5 mm pitch For blocks 6 mm pitch For blocks 8 mm pitch Numbers Reading of installed marker Horizontal format Pitch of 5 mm From 1 to 10 (10 times) From 11 to 20 (10 times) From 21 to 30 (10 times) From 31 to 40 (10 times) From 1 to 50 (2 times) From 1 to From 101 to 200 Pitch of 6 mm From 1 to 10 (10 times) From 11 to 20 (10 times) From 21 to 30 (10 times) From 31 to 40 (10 times) From 1 to 50 (2 times) From 1 to From 101 to 200 Black felt tip pen Indelible for marking 27

26 CAB 3 TM marking system for wiring and Viking 3 terminal blocks Perfect alignment of label holders Terminal block with CAB 3 markers and label-holders Pack (1) Markers for wiring 0.15 to 0.5 mm 2 and 0.5 to 1.5 mm 2 cross-section and terminal blocks On Viking 3 terminal blocks - 4 markers 0.15 to 0.5 mm 2 max. - 3 markers 0.15 to 1.5 mm 2 max to to Digits: international colour code Black Brown Red Orange Yellow Green Blue Purple Grey White Letters : black on yellow background A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Conventional symbols : black on yellow background / ± = T Pack (1) Markers for wiring 1.5 to 2.5 mm 2 and4to6mm 2 cross-section 1.5 to to6 2 Digits: international colour code Black Brown Red Orange Yellow Green Blue Purple Grey White Letters : black on yellow background A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Conventional symbols : black on yellow background / ± = T (1) Up to 0.5 mm 2 : strips of 25 markers From 0.5 mm 2 to 2.5 mm 2 : strips of 30 markers Upper 2.5 mm 2 : strips of 20 markers Price per marker 28

27 CAB 3 TM marking system accessories CAB 3 TM marking system for wiring and Viking 3 terminal blocks Dimensions markers CAB 3 Markers Polyamide 6/6 B Dimensions Cable cross-section (mm ) to to to to 6 A (mm) B (mm) C (mm) D (mm) Ø min./max. (mm) 0.8/ /3 2.8/ / to et to : no liking stud. D=6mm Marker holders Cat.No Cat.No Cat.No B C D Pack Accessories CAB 3 Marker-holders For cables cross-section from 10 mm 2 to 70 mm 2 Capacity: 8 digits, letters or symbols markers from 0.5 to 1.5 mm 2 or 1.5 to 2.5 mm 2 cross section Black, cross-section to to to 70 Support for markers Can be clipped on Viking 3 terminal blocks Capacity: 7 markers from 0.15 to 0.5 mm 2 6 markers from 0.5 to 1.5 mm 2 Transparent applicators For rapid selection and application of markers onto cable For markers Applicator colour for cross-section identification of cross-section to 0.5 CAB to 1.5 CAB to 2.5 CAB to 6 CAB 3 Set of markers to 0.5 mm 2 : markers + 10 applicators (250 digits from 0 to 9) to 1.5 mm 2 : markers + 10 applicators (300 digits from 0 to 9) to 2.5 mm 2 : markers + 10 applicators (300 digits from 0 to 9) to 6 mm 2 : markers + 10 applicators (200 digits from 0 to 9) On-site toolbox With removable tray for CAB 3 markers and applicators, Starfix ferrules Height 85 mm, depth 280 mm, width 450 mm Metal, padlockable Dim. Section of cable for marking (mm ) 2 10 to to to 70 A (mm) B (mm) C (mm) Support for markers Cat.No Characteristics and dimensions of on-site toolbox Cat.No On terminal blocks, with label holder Cat.No On cable whith marker-holder Cat.No Bottom tray consists of: 8 medium slots (each slot takes 1 box of CAB 3) 1 large slot Top tray consists of: 12 small slots (<=> approx. 6 boxes of CAB 3) 1 medium slot for applicators Capacity: approx CAB 3 markers On power terminal blocks 29

28 Starfix TM ferrules and crimping tools recharge Réglage de la section Pack Ferrules with insulating flange Provideanequipotentiallinkforallthestrands ofaflexibleconductor Active part in tinned electrolytic copper ConformtoNFC Simples in strips For-cables cross-section (mm²) Strips Ferrules turquoise green white blue red black grey orange green Simples individuals (sachet packing) turquoise green white blue red black grey orange green 5 50 Simples individuals (box packing) brown (1) 16 white white black red blue Doubles individuals 100/ x0.75 blue 100/ x1 red 100/ x1.5 black 100/ x2.5 grey Large capacity Starfix refills Large capacity for less frequent applicator reloading Translucent packaging For direct mounting on crimping tool Cat.No Cross-section Number of ferrules per strip White Blue Red Black Grey Pack Crimping tools for ferrules in strips Cutandcarryout4-pointcrimpingofferrulesfrom 0.25to6mm 2 in one operation Userecommendedforspringconnections Dedicatedapplicatorforeachcrimpingtoolfor dispensing strips Starfixcrimpingtoolfor0.25and0.34mm 2 cross-sections Suppliedfittedwithemptyapplicator Starfix crimping tool for 0.5 to 2.5 mm 2 cross-sections Fitted with an adjustment wheel Suppliedfittedwithemptyapplicator Assorted kit, comprising: -1Starfixcrimpingtool,Cat.No.37609fittedwith empty applicator -120x0.5mm 2 ferrules -120x0.75mm 2 ferrules -240x1mm 2 ferrules -320x1.5mm 2 ferrules -200x2.5mm 2 ferrules Starfixcrimpingtoolfor4and6mm 2 cross-sections Fitted with an adjustment wheel Supplied complete with empty applicator StarfixSmulti-purposecrimpingtoolfor0.5to 2.5 mm 2 cross-sections Tool cuts,strips,twists,crimps Suppliedcompletewith5emptyapplicators Forleftandright-handedpersons Crimping tool for individual single and double ferrules Starfixcrimpingtoolfor0.25to6mm 2 cross-sections For4-pointcrimpingofferrulesfrom0.25to6mm 2 Userecommendedforspringconnections Crimping tool with disengageable control system, crimping at end Rightorleft-handed Starfix clamp for 10 to 50 mm 2 cross-section Assortedkit:suppliedcomprising: -1toolwithcrimpingoperationcontrolsystemfor individual ferrules 10 to 50 mm 2-30individualferrules10mm 2-20individualferrules16mm 2-15individualferrules25mm 2-10individualferrules35mm 2-10individualferrules50mm 2 (1) Short ferrule 30 Bold pack quantities: Minimum quantities to be ordered

29 D D Starfix TM applicator Starfix TM applicator Correspondance table Cross-section Embout Simple ferrule Large capacity ferrule - refills Starfix applicator Starfix S applicator Example of simple/double ferrules on wires Pack Cat.No Starfix applicator ForStarfixcrimpingtool FordispensingstripsofferrulesinStarfixcrimping tools37608/09/10 For ferrules cross-section (mm²) et 0.34 yellow à2.5 red et6 orange NEW Example of different wires and ferrules Dimmensions (mm) Simlpes ferrules C Doubles ferrules C A A B B Cross-section A B C D Cross-section A B C D E x x x x Exemple of use 1 Fit the applicator 2 Adjust1 The 2-material handle gives an excellent grip 3 Insert the wire 4 Crimp Exemple of use Starfix S tool 1 Adjust the crosssection 2 Strip and twist 3 Crimp 31