THE ULTIMATE HEAD Dual Nozzle Design Single Opposed Nozzle Outlets
|
|
|
- Andra Beasley
- 5 years ago
- Views:
Transcription
1 Model 3000 Spray Head THE ULTIMATE HEAD Dual Nozzle Design Single Opposed Nozzle Outlets Components guaranteed against leakage or failure for one million cycles. Spray head body guaranteed 10 years against die release erosion. Operates at a wide range of air and lube pressures from 40 to 100 psi. Single opposed nozzles provide independent angle and volume adjustment for both halves of the die. Available in seven different spray nozzle patterns for precise coverage. Available in either Ejector or Cover Side configurations. For complete info and specifi cation, see Advance Spraying Technology Brochure or visit The World of Automation and Consumables Solutions
2 *8977 Medium Cone 8967 Medium Fan Cone 8948 Fine Fan 8968 Wide Fan To order SH-3000 Spray Heads with specific nozzles, other than the standard #8977, cross reference spray head with the desired nozzle: SH-3000 Double Nozzle Design Opposed Outlet (SH-3000) 8977 (Standard) SH SH SH SH SH SH SH SH-TUBE-001 SH-3000-T-001 SH-TUBE-002 SH-3000-T-002 SH-TUBE-003 SH-3000-T Fan 8975 Oval 8960 (Socket Head Cap Screw) 8950 (Top Cap) SH-TUBE-001 1/4 O Tube (2 )** (Conical Spring) SH-TUBE-002 1/4 O Tube (4 )** SH-TUBE-003 1/4 O Tube (6 )** **Note: SH-TUBE-001, SH-TUBE-002, and SH-TUBE-003 consist of: 4079 (O-ring) 9649 (adapter, nozzle to tube) 5998 (adapter, 1/8 mnpt to 1/4 tube) tube, tube, tube (O-ring) 8953 (Nozzle Seat) 8984 (O-ring) 9926 (Poppit Assembly) 8966 Rubber Seat 8955 Spray Head Poppit 8963 (O-ring) 8947 (Body SH-3000 Opposed) *Nozzle 8977 (Standard) 8970 (Nozzle Retainer) (Needle Assembly) 8949 Needle 8983 O-ring 8959 (Set Screw) Spray Head Foot Print 1-1/2 x 2 Specifi cations are subject to change without notice. Industrial Innovations, Inc Dormax Street SW - Grandville, Michigan Phone: Fax: Printed in USA APC
3 Model 3004 Spray Head THE ULTIMATE HEAD Quad Head Design Quad Side-by-Side Nozzle Outlets Spray head body guaranteed 10 years against die release erosion. Component guaranteed against leakage or failure for one million cycles. Operates at a wide range of air and lube pressures from 40 to 100 psi. Quad side-by-side nozzles provide independent angle and volume adjustment for both halves of the die. Available in seven different spray nozzle patterns for precise coverage. Available in either Ejector or Cover Side configurations. For complete info and specifi cations, see Advance Spraying Technology Brochure or visit The World of Automation and Consumables Solutions
4 *8977 Medium Cone 8967 Medium Fan Cone 8948 Fine Fan To order SH-3004 Spray Head with specific nozzles, other than the standard #8977, cross reference spray head with the desired nozzle: Nozzle Design SH-3004 Quad Nozzle SH-3004 Quad Nozzle Ejector Side Cover Side (SH-3000QE) (SH-3000QC) 8977 (Standard) SH-3004QE-8977 SH-3004QC SH-3004QE-8967 SH-3004QC SH-3004QE-8969 SH-3004QC SH-3004QE-8948 SH-3004QC SH-3004QE-8968 SH-3004QC SH-3004QE-8980 SH-3004QC SH-3004QE-8975 SH-3004QC-8975 SH-TUBE-001 SH-3004QE-T-001 SH-3004QC-T-001 SH-TUBE-002 SH-3004QE-T-002 SH-3004QC-T-002 SH-TUBE-003 SH-3004QE-T-003 SH-3004QC-T Wide Fan Fan 8960 (Socket Head Cap Screw) 8975 Oval 8950 (Top Cap) SH-TUBE-001 1/4 O Tube (2 )** (Conical Spring) 8984 (O-ring) SH-TUBE-002 1/4 O Tube (4 )** SH-TUBE-003 1/4 O Tube (6 )** 9926 (Poppit Assembly) 8966 Rubber Seat 8955 Spray Head Poppit 8963 (O-ring) **Note: SH-TUBE-001, 8959 (Set Screw) SH-TUBE-002, and SH-TUBE-003 consist of: 4079 (O-ring) 9649 (adapter, nozzle to tube) 8962 (O-ring) 5998 (adapter, 1/8 mnpt to 1/4 tube), tube, tube, tube (Nozzle Seat) (Needle Assembly) 8949 Needle 8983 O-ring (Body SH-3004QC) (Body SH-3004QE) 8970 (NozzleRetainer) *Nozzle 8977 (Standard) Spray Head Foot Print 1-1/2 x 2 Specifi cations are subject to change without notice. Industrial Innovations, Inc Dormax Street SW - Grandville, Michigan Phone: Fax: Printed in USA APC
5 Model 3004 Spray Head THE ULTIMATE HEAD Quad Nozzle Design Dual Opposed Nozzle Outlets Components guaranteed against leakage or failure for one million cycles. Spray head body guaranteed 10 years against die release erosion. Operates at a wide range of air and lube pressures from 40 to 100 psi. Quad opposed nozzles provide independent angle and volume adjustment for both halves of the die. Available in seven different spray nozzle patterns for precise coverage. Available in either Ejector or Cover Side configurations. For complete info and specifi cations, see Advance Spraying Technology Brochure or visit The World of Automation and Consumables Solutions
6 *8977 Medium Cone 8967 Medium Fan O Cone 8948 Fine Fan 8968 Wide Fan To order SH-3004 Spray Heads with specific nozzles, other than the standard #8977, cross reference spray head with the desired nozzle: Nozzle Design SH-3000 Quad SH-3000 Dual Opposed Outlet (SH-3004) ( 8977 (Standard) SH SH SH SH SH SH SH SH-TUBE-001 SH-3004-T-001 SH-TUBE-002 SH-3004-T-002 SH-TUBE-003 SH-3004-T-003 O Fan 8975 Oval 8960 (Socket Head Cap Screw) SH-TUBE-001 1/4 O Tube (2 )** 8950 (Top Cap) (Conical Spring) SH-TUBE-002 1/4 O Tube (4 )** 8984 (O-ring) SH-TUBE-003 1/4 O Tube (6 )** **Note: SH-TUBE-001, SH-TUBE-002, and SH-TUBE-003 consist of: 4079 (O-ring) 9649 (adapter, nozzle to tube) 5998 (adapter, 1/8 mnpt to 1/4 tube tube, tube, tube (Nozzle Seat) 8959 (Set Screw) 8962 (O-Ring) 9926 (Poppet Assembly) 8966 Rubber Seat 8955 Spray Head Poppit 8963 (O-ring) (Needle Assembly) 8949 Needle 8983 O-ring (Body SH-3004) 8970 (Nozzle Retainer) *Nozzle 8977 (Standard) Spray Head Foot Print 1-1/2 x 2 Specifi cations are subject Industrial Innovations, Inc Dormax Street SW - Grandville, Michigan Printed in USA to change without notice. Phone: Fax: APC
7 Model 3000 Spray Head THE ULTIMATE HEAD Dual Nozzle Design Side-by-Side Nozzle Outlets Component guaranteed against leakage or failure for one million cycles. Spray head body guaranteed 10 years against die release erosion. Operates at a wide range of air and lube pressures from 40 to 100 psi. Dual side-by-side nozzles provide independent angle and volume adjustment for both halves of the die. Available in seven different spray nozzle patterns for precise coverage. Available in either Ejector or Cover Side configurations. For complete info and specifi cations, see Advance Spraying Technology Brochure or visit The World of Automation and Consumables Solutions
8 *8977 Medium Cone 8967 Medium Fan Cone To order SH-3000 Spray Head with specific nozzles, other than the standard #8977, cross reference spray head with the desired nozzle: Nozzle Design SH-3000 Dual Nozzle SH-3000 Dual Nozzle Ejector Side Cover Side (SH-3000DE) (SH-3000DC) 8977 (Standard) SH-3000DE-8977 SH-3000DC SH-3000DE-8967 SH-3000DC SH-3000DE-8969 SH-3000DC SH-3000DE-8948 SH-3000DC SH-3000DE-8968 SH-3000DC SH-3000DE-8980 SH-3000DC SH-3000DE-8975 SH-3000DC-8975 SH-TUBE-001 SH-3000DE-T-001 SH-3000DC-T-001 SH-TUBE-002 SH-3000DE-T-002 SH-3000DC-T-002 SH-TUBE-003 SH-3000DE-T-003 SH-3000DC-T Fine Fan 8968 Wide Fan Fan 8975 Oval 8960 (Socket Head Cap Screw) 8950 (Top Cap) (Conical Spring) SH-TUBE-001 1/4 O Tube (2 )** 8984 (O-ring) SH-TUBE-002 1/4 O Tube (4 )** SH-TUBE-003 1/4 O Tube (6 )** 9926 (Poppit Assembly) 8966 Rubber Seat 8955 Spray Head Poppit 8963 (O-ring) **Note: SH-TUBE-001, SH-TUBE-002, and SH-TUBE-003 consist of: 4079 (O-ring) 9649 (adapter, nozzle to tube) 5998 (adapter, 1/8 mnpt to 1/4 tube) 8962 (O-ring) tube, tube, tube (Nozzle Seat) (Needle Assembly) 8949 Needle 8983 O-ring 9358B (Body SH-3000DC) 9359B (Body SH-3000DE) 8959 (Set Screw) 8970 (Nozzle Retainer) *Nozzle 8977 (Standard) Spray Head Foot Print 1-1/2 x 2 Specifi cations are subject to change without notice. Industrial Innovations, Inc Dormax Street SW - Grandville, Michigan Phone: Fax: Printed in USA APC
PRO-MIX I MS. Proportional Mixing Systems Lubricant and Coolant Mixing. PRO-MIX I MS Features:
PRO-MIX I MS Lubricant and Coolant Mixing The NEW Pro-Mix I, individual proportioning system from Industrial Innovations, ensures stable, homogenous lubricant mixtures with adjustable ratios of 3:1 to
AIR ATOMISER NOZZLES. Vapro Series. VP Body 24. VPX/VPL Body
AIR ATOMISER NOZZLES For applications where very fine droplets and low flow rates are required, the air atomiser range from Lurmark, including the VAPRO jet and ULTRA nozzles are the ideal choice. Air
FLEXTOOL FLEXTOOL OTPIMIZATION PARTS
OTPIMIZATION PARTS The AED platform is a comprehensive toolbox allowing the adaption of the tool setup to all known process setups. The high level of alignment of the spraying tool and the corresponding
No adapters needed for ADVANCE servo ladlers. Adapters available for other ladler manufacturers.
Quick Change Ladle Cups Direct Mount - Pin-mounting design means no tools or adapters needed for changing DVNCE Quick-Change Ladle Cups. DVNCE Quick-Change Ladle Cups are made in merica meaning high-quality
Dispense Fluids in A Low Volume, Low Pressure, Precision Spray.
INDUSTRIES, INC. ROCKFORD, IL 61109 Dispense Fluids in A Low Volume, Low Pressure, Precision Spray. Minimize the Over-Spray Minimize the Cleanup in the Work Area Minimize Airborne Droplets of Fluids in
Low Pressure Series - Accessories. High Pressure Series - Accessories
Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray
SCUBAPRO Repair Guide MK 16 First Stage
SCUBAPRO Repair Guide MK 16 First Stage USE THIS GUIDE AS A REFERENCE WHEN SERVICING THE MK 16 FIRST STAGE 1 P/N 1-07-000 SCUBAPRO MK 16 First Stage TOOLS NEEDED FOR REPAIR OF MK 16 P/N 00000 TOOLS NEEDED
CJ Series Flat Spray Nozzles For Air & Saturated Steam CJ The following description will help to explain our Part Number/ Code in relation to the SPRAYTECH Spray Nozzle. EXAMPLE ORDERING. SPRAYTECH CJ
ORSCO lubrication systems
ORSCO lubrication systems Extend chain life and reduce oil consumption Short-term return on investment (ROI) Cleaner conditions, less downtime and overall energy savings ORSCO series 170 The ORSCO concept
QA4 / QA6 / QA8 Series Precision Air Nutrunners
QA4 / QA6 / QA8 Series Precision Air Nutrunners Because every assembly is critical There s much more to an assembly application than merely putting wrench to bolt. It s an intricate matter of linking tool
SPRAY CHARACTERISTICS Mist at low pressure; fog at high pressure Spray pattern: Cone-shaped Fog Flow rates: to l/min
MicroWhirl Fine tomization Outstanding atomization Rugged pinless design Drip-free performance 70 micron polypropylene filter Safety wire hole available Patented design Minimum operating pressure 7 Mist
SV1217-SS SPRAY VALVE O P E R AT I N G M A N U A L
SV1217-SS SPRAY VALVE O P E R AT I N G M A N U A L I&J FISNAR INC. 2003 GENERAL DESCRIPTION The SV1217-SS spray valve is operated by air pressure, providing precise deposit control for low to medium viscosity
Pneumatic atomizing nozzles ViscoMist flat fan, external mix Series 176
nozzles ViscoMist flat fan, external mix Versatile design with builtin pneumatic needle valve for liquid flow control and automatic clean-out. Three nozzle body configurations offer flexible tailoring
CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING
AIR SPRAY NOZZLES CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING C1 AIR NOZZLES INTRODUCTION LARGEST SELECTION OF NOZZLES IN
TYPE AL AIR ATOMISING D.20
SPRAY CHARACTERISTICS The Delavan AL air atomising series spray nozzles offer the user a wide variety of spray patterns, flow rates and atomisation. Unlike hydraulic or pressurised nozzles where the energy
ATD PIECE HVLP SPRAY GUN SET INSTRUCTION MANUAL
ATD-6904 6 PIECE HVLP SPRAY GUN SET INSTRUCTION MANUAL Read this manual carefully and understand it completely. Retain manual for future use. Always follow safety precautions to prevent personal injury
Standard and Conical AN Series Air Spray Nozzles
Instruction Sheet P/N 107967E Standard and Conical AN Series Air Spray Nozzles Introduction The Nordson air spray nozzles described in this instruction sheet are categorized by their type of spray pattern:
ATD MM TOUCH UP GUN W/CUP INSTRUCTION MANUAL
ATD-6903 1.0MM TOUCH UP GUN W/CUP INSTRUCTION MANUAL Read this manual carefully and understand it completely. Retain manual for future use. Always follow safety precautions to prevent personal injury and/or
ATD MM PRIMER GUN W/CUP INSTRUCTION MANUAL
ATD-6902 1.8MM PRIMER GUN W/CUP INSTRUCTION MANUAL Read this manual carefully and understand it completely. Retain manual for future use. Always follow safety precautions to prevent personal injury and/or
PRO SERIES SPRAYER LINEUP
PRO SERIES PRO SERIES LINEUP 3PT SKID PUMPS DRY MATERIAL CARTS ACCESSORIES SPREADERS & AERARS MODEL NUMBER (PART NUMBER - CATALOG PAGE) LG-25-PRO (5302922 - PAGE 5) 2 PRO SERIES WWW.FIMCOINDUSTRIES.COM
factsheet Field Sprayer Calibration Introduction Pre-Calibration Checklist Using a Calibration Bottle
Field Sprayer Calibration Introduction It is important to properly calibrate your sprayer for maximum performance. Improper spray application can be costly in terms of poor pest control, crop injury and
Aeroquip Low Profile Self Sealing Couplings. Series 2000 Series 2001
Aeroquip Low Profile Self Sealing Couplings Series 2000 Series 2001 Low Profile Self Sealing Couplings 2000 and 2001 Opposed Poppet Series 2000 Series Couplings Qualified to Type I, Class A and Type II,
ST/HM. Automatic Spray Gun SERIES FUSO SEIKI CO., LTD. Increased productivity and cost savings by using a lightweight, compact and powerful spray gun
F U S O S E I K I C O., L T D Automatic Gun Increased productivity and cost savings by using a lightweight, compact and powerful spray gun ST/HM SERIES FUSO SEIKI CO., LTD. Catalog No. CG-98E-1 Application
Section F Air Atomizing Spray Nozzles
Section F tomizing Overview If your application requires air atomizing nozzles, you ll find information on the largest selection in the industry available in this section. hoose from dozens of nozzle bodies,
Focus On Training Section: Unit 4
All Pump Types Page 1 1. Title Page Be able to describe unit learning objectives: 2. Fuel System Be able to briefly note the components of a typical fuel injection system 3. Nozzle Location Know the difference
Section E Fine Spray Nozzles
Section E Fine Spray s Overview Our fine spray hydraulic atomizing nozzles are available in two styles. Standard s: Traditional threaded nozzles made of metal. Quick-Connect s: Consisting of a nozzle body
Paint Your Wagon. Phil Merrifield European Product Manager Atomisation Steve Mannouch Application Specialist R&D Engineering
Paint Your Wagon Phil Merrifield European Product Manager Atomisation Steve Mannouch Application Specialist R&D Engineering 1 What We Do Develop, manufacture and market, premium level systems and equipment
GREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN
GREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN Guns Spray 38500 Model JD9-C - 38500 The JD9 heavy-duty spray gun can help make your operation more effective and profitable. Check these advantages. Adjustable
WARRANTY. Illustration
WARRANTY This product is guaranteed against defects for a period of 12 months from date of purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395 124 (Supercheap Auto) of 751 Gympie
KF O-Ring & Packed Stem Style Needle Valves
KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low pressures. These valves offer exceptional regulating properties
SYSTEM TB 1000 BULK ADHESIVE APPLICATOR INSTRUCTION FOR SET UP AND OPERATION SYSTEM TB1000
Page 1 of 5 SYSTEM TB 1000 BULK ADHESIVE APPLICATOR INSTRUCTION FOR SET UP AND OPERATION SYSTEM TB1000 Congratulations on your purchase of the TARGET SYSTEM TB 1000 Bulk Adhesive Applicator. This high
Hi-Line TH Revolution TR Micron CM Hi-Line CH Eclipse CS
K U S T O M S E R I E S M A N U A L & P A R T S G U I D E Hi-Line TH Revolution TR Micron CM Hi-Line CH Eclipse CS Congratulations on the purchase of your Iwata Kustom a versatile, reliable and high performance
WARRANTY. Illustration
WARRANTY This product is guaranteed against defects for a period of 12 months from date of purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395 124 (Supercheap Auto) of 751 Gympie
ASSEMBLY AND OPERATING INSTRUCTION MANUAL
www.rainmakersprayers.com ASSEMBLY AND OPERATING INSTRUCTION MANUAL 18 VOLT LITHIUM ION BACKPACK SPRAYER-4 GALLON Product# 708910 Front View Back View Please read this manual for instructions and precautions
Walker Sprayer. Operator and Parts Manual. Locke Turf 307 Highway 52E, Opp, Alabama, 36467, (334)
Walker Sprayer Operator and Parts Manual Locke Turf 307 Highway 52E, Opp, Alabama, 36467, (334) 493-1300 CONGRATULATIONS You have invested in the best implement of its type on the market today. The care
w w w. I W A T A A I R B R U S H. c o m
w w w. I W A T A A I R B R U S H. c o m Iwata-Medea, Inc. P.O. Box 14397 Portland, Oregon 97293 tel: (503) 253-7308 fax: (503) 253-0721 info@medea-artool.com part no. K 910 K U S T O M S E R I E S M A
Twist & Dry. Twist & Dry Component System SPECIAL PURPOSE. Same day shipping for wear parts! Tungsten Carbide Options
Twist & Dry TO DER: specify pipe size, connection type, 108 Twist & Dry Component System The Twist & Dry series of nozzles was designed and developed for the spray drying industry, with the dryer operator
ADJUSTING PRESSURE USING THE BOOM NOZZLES OPERATION
6. The pressure gauge is shipped in a parts bag. Thread the gauge into the tee fitting as shown on the exploded view drawing. Use a good quality thread sealant to prevent leaks. The in-line switch turns
AUTOJET MODEL MODULAR SPRAY SYSTEM AUTOMATIC SPRAY CONTROL MADE SIMPLE
AUTOJET MODEL 1550+ MODULAR SPRAY SYSTEM AUTOMATIC SPRAY CONTROL MADE SIMPLE AUTOJET MODEL 1550+ MODULAR SPRAY SYSTEM OPTIMIZES THE PERFORMANCE OF YOUR AUTOMATIC SPRAY NOZZLES BENEFITS Automatic on/off
DT34/DT54 SERIES GOLF ROTORS
DT34/DT54 SERIES GOLF ROTORS The DT34/DT54 Series with dual trajectory main nozzle provides exceptional nozzle performance at the 25 standard angle position and great performance in windy applications
Industrial Solutions. AirCoat guns. manual application. Excellent finishing quality Human engineered design High process reliability
Industrial Solutions AirCoat guns manual application Excellent finishing quality Human engineered design High process reliability WAGNER AirCoat - Perfect finishing for high quality surfaces WAGNER AirCoat
Optional Nozzles for Versa-Spray and Versa-Spray II Guns
Instruction Sheet P/N 079A Optional Nozzles for Versa-Spray and Versa-Spray II Guns Description A wide variety of nozzles are available for Versa-Spray and Versa-Spray II powder spray guns. Manual and
Rechargeable Battery Powered Sprayer. user manual SPRAYER
Rechargeable Battery Powered Sprayer user manual EZ E ZS SPRAYER PRAY PR AYE ER TM Table of Contents Overview Page 1 Components Page 1 Features Page 1 Technical Information Page 3 Operating Instructions
Owner's Manual. Model: UTL-60-7-TSC ( ) (60 Gallon Utility Sprayer w/ 7-Nozzle Boom Assembly) Technical Specifications.
Owner's Manual Model: UTL-60-7-TSC (66) (60 Gallon Utility Sprayer w/ 7-zzle Boom Assembly) Technical Specifications 60 Gallon Corrosion-Resistant Polyethylene Tank Deluxe Pistol-Grip Handgun w/5 Ft. Hand
Matched Precipitation Rate (MPR) Nozzles
Tech Spec Matched Precipitation Rate (MPR) Nozzles Primary Application Matched Precipitation Rate (MPR) Nozzles simplify the design process by allowing sprinklers with various arcs and radii to be mixed
Part 1: Land Applications Machinery Spaces, Industrial Hazards, Combustion & Gas Turbine Enclosures, Light & Ordinary Hazards
Nozzle Design Layout Part 1: Land Applications Machinery Spaces, Industrial Hazards, Combustion & Gas Turbine Enclosures, Light & Ordinary Hazards Fogex Nozzles Fogex water mist nozzles are selected for
HOT MELT SYSTEMS. AutoPack. Discover the HMT Difference. Innovative Solutions For Your Automated Packaging And Converting Needs.
AutoPack HOT MELT SYSTEMS Discover the HMT Difference. Innovative Solutions For Your Automated Packaging And Converting Needs. Discover The HMT Difference When you purchase a hot melt application system,
JPL Series Air Atomizing Nozzles. Bulletin JPL99C
JPL Series Air Atomizing Nozzles Bulletin JPL99C JPL Series Air Atomizing Spray Nozzles BEX JPL Air Atomizing Spray Nozzles use compressed air (or gas) to produce an accurately controlled liquid dispersion
COSASCO CHEMICAL INJECTION SYSTEM ACCESS FITTING ASSEMBLIES. Model 53 Socketweld CI
COSASCO CHEMICAL INJECTION SYSTEM ACCESS FITTING ASSEMBLIES Model 53 Socketweld CI Cosasco high pressure chemical injection fittings allow safe, controlled, and easy injection under full operating pressure,
brands you trust. XLB - Lined Ball Valves
brands you trust. XLB - Lined Ball Valves XLB Lined Ball Valve Lower Torque - Smaller Actuators Lower torque smaller actuators, reduced costs, space and weight saving Actuator mounting fully compliant
S O L U T I O N S ORSCO. Lubrication Systems. Extends Chain Life. Series 170 Standard System
T H E L AT E S T P R O D U C T S A N D N E W S F O R L I N C O L N C U S T O M E R S S O L U T I O N S JUNE 2009 VOL. 3, NO. 1 ORSCO Lubrication Systems Extends Chain Life Reduced Oil Consumption Short-term
INFORMATION INFORMATION (LOW VOLUME)
FACTS FACTS & GENERAL GENERAL INFORMATION INFORMATION CIMA CIMA ATOMIZER ATOMIZER SPRAYERS SPRAYERS (LOW VOLUME) 1 CIMA ATOMIZER AIR SPRAYERS This booklet is designed to provide information on the many
21-25F-00 PB-251, PB-255ES, ES-255ES 1
21-25F-00 PB-251,, ES-255ES 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
GUNJET NUMBER AA143-AL-*-10 A C A C
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 2 to 55 bar. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
SPRAY EQUIPMENT (NOZZLES, PUMPS, SYSTEMS)
Notes for Hort 481 Lab # 8 Sprayer parts, nozzles, pumps and tanks. Page 1 of 5 SPRAY EQUIPMENT (NOZZLES, PUMPS, SYSTEMS) I. COMPONENTS OF THE SPRAY SYSTEM A. ESSENTIAL PARTS OF A SPRAY SYSTEM 1. Tank
Dual Applicators for Non-Atomized Conformal Coating Improve High- Volume Manufacturing
Dual Applicators for Non-Atomized Conformal Coating Improve High- Volume Manufacturing By Camille Sybert and Michael Szuch Nordson ASYMTEK Atomized spray is the most common method for applying conformal
GTV HVOF K2 Burner OPERATORS MANUAL GTV Verschleißschutz GmbH.
OPERATORS MANUAL GTV HVOF K2 Burner 780.000 1 Machine: EG - DECLARATION OF CONFORMITY According to EG- Machine Guideline 98/37/EG, Annex II A EG-Guideline Electrical Magnetically Amicability 89/336/EWG
INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS. 143
8 INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS www.charlandthermojet.com 143 T-70 SERIES INDUSTRIAL AUTOMATIC SPRAY NOZZLE GUN Ideal for many cleaning tasks in every kind of industrial
WARRANTY. Illustration
WARRANTY This product is guaranteed against defects for a period of 12 months from date of purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395 124 (Supercheap Auto) of 751 Gympie
Nozzle Features. For advice on nozzle choice please call +44 (0) or
This section provides information on the factors that influence spray characteristics: liquid flow, spray pattern, angle, droplet size and spray impact. It also offers advice on choosing the of nozzle
Pressure relief valve, pilot-operated. Type ZDB and Z2DB. Contents. Features. RE Edition: Replaces: 05.11
Pressure relief valve, pilot-operated Type ZDB and ZDB RE 576 Edition: 06- Replaces: 05. Size 0 Component series 4X Maximum operating pressure 35bar [4600 psi] Maximum flow 00 l/min [6.4 US gpm] H7747
UP-RIGHT CLEANERS HPT Service Manual
UP-RIGHT CLEANERS 39100144 HPT16 001 Service Manual Copyright 2011 Gias S.r.L. 39100144 HPT16 001 0714 (02/04/2007) Ref. Descrizione - Description - Beschreibung - Descripcion Ricambio Part No. Piece
Macro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
ADVANCED LINE. All airmotors can also be used without lubrication.
Screwdriving technology Automation Air motors Air tools ADVANCED LINE Stainless Steel Air s from 20 W / 0.03 Hp up to 1.2 kw / 1.6 Hp NEW MOTOR RANGE High torque motors made from stainless steel: Our ADVANCED
TECHNICAL 20,000 PSI UNIT CONVERSIONS & FORMULAS. Measurement Conversion Example. Formula English Units Metric Units
UNIT CONVERSIONS & FORMULAS Measurement Conversion Example 1 in. = 25.4 mm 12 in. x 25.4 = 304.8 mm 1 in. =.0254 m 120 in. x.0254 = 3.05 m Length 1 ft. =.3048 m 12 ft. x.3048 = 3.68 m 1 mm =.0394 in. 100
Atomizing Spray Nozzles
Atomizing Atomizing Nozzles All stainless steel construction for durability and corrosion resistance! What Are Atomizing Nozzles? EXAIR s atomizing spray nozzles atomize fluids (most commonly water) in
Precision Spray Nozzles for Pickling Lines
Precision Spray Nozzles for Pickling Lines O H O S O O H HIGH QUALITY NOZZLES FOR YOUR HIGH QUALITY PROCESS The closer it comes to the final step of a production process the more important the direct result
GUNS. YRL51 Gun. ST-1100 Lightweight Gun MTM Gun AL35. MV920 Karcher Style Gun. Spray Guns. ST-810 Front Entry MV2005.
GUNS YRL51 Gun ST-1100 Lightweight Perfect for cold water units or smaller hot water units 7 GPM 3050 PSI 300 F. max 13.2 GPM maximum 4050 PSI maximum 6267 4126 ST-1100 MTM407 7 GPM maximum 250 F. maximum
MicroCoat. System Operating Manual MC2000 Series. MC785, MC785-WF Spray Valves. US: UK: Mexico:
MicroCoat System Operating Manual MC2 Series MC785, MC785-WF Spray Valves A NORDSON COMPANY US: 8-498-8865 UK: 8 585733 Mexico: 1-8-556-3484 Introduction The MicroCoat System provides precise lubrication
ZRV. Direct Operated Check Valve Series ZRV (Denison)
Characteristics / Ordering Code Direct Operated Check Valve Series ZRV (Denison) Direct operated check valves series ZRV have a cartridge type insert to provide zero leakage and high life time. he check
PRODUCT CATALOGUE PIVOTPRO. pivotpro.com.au
PRODUCT CATALOGUE pivotpro.com.au is a specialist Australian supplier of quality pivot irrigation systems & components. The right products when you need it. sources products from a wide variety of trusted
HIGH PRESSURE SPRAYERS
S S STRAIGHT THROUGH QDS FITTINGS AND SWIVELS NOZZLES SPRAY GUNS AND WANDS 337 NOZZLES QUICK DISCONNECT NOZZLE 0-degree red tip nozzle, 15-degree yellow tip nozzle, 25-degree green tip nozzle, 40-degree
AN AUTHORIZED DISTRIBUTOR OF EASY BAR PRODUCTS
SPRAY AN AUTHORIZED DISTRIBUTOR OF EASY BAR PRODUCTS MARECHE DISTRIBUCIÓN S.L. C/ San Martín nº 22. 01130 Murguía (Álava) - SPAIN Tel: +34 945 10 70 63 / +34 663 17 41 45 Fax: +34 945 56 00 39 e-mail:
BOOMLESS NOZZLES FIELDJET TFW TURBO FLOODJET BOOMLESS NOZZLES WITH EXTRA-WIDE FLAT SPRAY PROJECTION
BOOMLESS NOZZLES FIELDJET BOOMLESS NOZZLES WITH EXTRAWIDE FLAT SPRAY PROJECTION The KLC Fieldjet nozzle is typically used to spray areas not accessible with a boom sprayer. Its onepiece design projects
Syslog Technologies Innovative Thoughts
FUEL INJECTOR TESTING EQUIPMENT SYNOPSIS During the compression stroke in a four-stroke diesel engine, air is compressed in the engine cylinder. The pressure of the air is increased and its temperature
JET SET R GUIDES MODULE MOUNTING INSTRUCTIONS
JET SET R GUIDES MODULE MOUNTING INSTRUCTIONS INSTALLATION 1. Using the template provided, select a location that will be convenient for filling the tank and making set up changes. 2. Drill and tap three
NEW! NEW! Series 3100H HVLP AirSpray Gun HVLP 1 Qt. Cup Siphon Fed Guns Air Requirements: PSI
High Transfer Efficiency AQMD Compliant Ultra-Fine Atomization Precision Fan Control Easy-Clean Gun Body Built-In Cheater Valve Series 3100H HVLP AirSpray Gun HVLP 1 Qt. Cup Siphon Fed Guns Air Requirements:
Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
Full cone nozzles.
nozzles Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling esuperheating ust control Fire protection Foam control as treatment ing onto mats in air washers ing over packings
YARWAY NARVIK MODEL 88 SPID SMALL PIPE INLINE DESUPERHEATER
A wide range of desuperheaters, pneumatic actuators, strainers to satisfy all specifications of the power, pulp and paper industry and process gas applications FEATURES Fabricated construction Special
A Guide to Improving the Performance of Your Drying and Blow-off Applications with WindJet Air Products. Experts in Spray Technology Spray Nozzles
Experts in Spray Technology Spray Nozzles Spray Control Spray Analysis Spray Fabrication A Guide to Improving the Performance of Your Drying and Blow-off Applications with WindJet Air Products Usage Tips
P R O D U C T C A T A L O G U E
P R O D U C T C A T A L O G U E S P R A Y G U N S & A C C E S S O R I E S THE PILOT INDIA GROUP AT A GLANCE 60 Years of brand trust 800 Dealers 7000 Sub Dealers Exports to 12 countries & 5 continents 3
Alpha Tech Pet, Inc. HydroMAID - "Mobile Automated Integrated Diluter" Rechargeable Battery
Alpha Tech Pet, Inc. HydroMAID - "Mobile Automated Integrated Diluter" Rechargeable Battery WEAR ALWAYS THANK YOU FOR CHOOSING OUR PRODUCTS Please use this equipment carefully and observe all warnings
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
Boomless Spray Nozzles. technology that works U.S. and International Patents Pending.
Boomless Spray Nozzles technology that works U.S. and International Patents Pending. FEATURES, BENEFITS AND APPLICATIONS BOOMINATOR FEATURES All nozzles are MADE IN THE U.S.A. All nozzles carry a 3-YEAR
Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation. Motion & Flow Control Products, Inc
Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our
G15/G40. Manual Air-Assisted Spray Guns designed for exceptional spray quality and ease of use PROVEN QUALITY. LEADING TECHNOLOGY.
G15/G40 Manual Air-Assisted Spray Guns designed for exceptional spray quality and ease of use PROVEN QUALITY. LEADING TECHNOLOGY. Exceptional Spray Quality Maximize efficiency and quality, while reducing
YARWAY FLOAT TRAPS SERIES 23000, 26000, 33000
SERIES 23000, 26000, 33000 Series 23000 and 26000 for steam-using equipment, supporting high-volume drain discharge. Series 33000 for air and gas, achieving energy conservation through rapid drain discharge.
How important is Calibrating your sprayer on a regular basis?
Sprayer Calibration How important is Calibrating your sprayer on a regular basis? If you spend $50,000.00 dollars per year on chemical! We divide that cost by the number of nozzles on your sprayer. For
High Solid Spray (HSS) System
High Solid Spray (HSS) System High solid spray system for coating applications The HSS Spray System is an innovative dispensing system using EFD Ratio-Pak and Side x Side cartridges for meter mix and spraying
MACH 1A HVLP (MACH 1AV HVLP) Automatic Airspray Gun
MACH 1A HVLP (MACH 1AV HVLP) Automatic Airspray Gun Your new Binks MACH 1A HVLP Automatic Spray Gun is exceptionally rugged in construction, and is built to stand up under hard, continuous use. However,
UNIT CONVERSIONS & FORMULAS
UNIT CONVERSIONS & FORMULAS MEASUREMENT CONVERSION EXAMPLE 1 in. = 25.4 mm 12 in. x 25.4 = 304.8 mm 1 in. =.0254 m 120 in. x.0254 = 3.05 m LENGTH 1 ft. =.3048 m 12 ft. x.3048 = 3.68 m 1 mm =.0394 in. 100
MODEL: ATVBK-710 BEFORE RETURNING THIS PRODUCT FOR ANY REASON, PLEASE CALL
5307 MODEL: ATVBK-70 7 Nozzle boom assembly W/CONNECTING FITTINGS Assembly / Operation Instructions / Parts original sales slip, or other evidence of purchase date, to your distributor / dealer. TECHNICAL
Build the future, prepare for LNG
LNG Liquefied Natural Gas is the efficient new green fuel Build the future, prepare for LNG Manufacturing safe and innovative quality products Your LNG partner: LNG Vent Connections Male Quick Disconnect
Tooling List 10mm Socket 3 Extension Ratchet Large Jaw Pliers Needle Nose Pliers
Thank you for purchasing! The CorkSport Binary VTA BPV provides features and performance to suit stock cars and on up to big turbo high power setups. The CorkSport Binary VTA BPV holds 50psi, responds
AUTOMATIC SPRAY NOZZLES COATING DISPENSING GLAZING LAMINATING ROBOTIC APPLICATIONS MARKING FLAVORING HUMIDIFYING LUBRICATING MOISTURIZING
AUTOMATIC SPRAY NOZZLES COATING DISPENSING GLAZING LAMINATING ROBOTIC APPLICATIONS MARKING FLAVORING HUMIDIFYING LUBRICATING MOISTURIZING B1 AUTOMATIC NOZZLES INTRODUCTION INTRODUCTION If your application
Vacuum gripping systems Contents
Vacuum gripping systems Contents Vacuum gripping systems at a glance... 16 Customized vacuum grippers... 17 Standard vacuum grippers... 18 15 Vacuum gripping systems Vacuum gripping systems at a glance
Module. Section 9. NOTE: This section applies to applicators with CC200 modules B Issued 6/01. Manual 42-CF200-CM-01
Section 9 NOTE: This section applies to applicators with CC200 modules. 9-0 Table of Contents i Table of Contents Section 9 1. Introduction............................................... 9-1 2. Specifications.............................................
Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation BALLVALVE.COM
Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our
MODEL: ATV Volt, 15 Gallon ATV Mounted Sprayer ASSEMBLY / OPERATION INSTRUCTIONS / PARTS
5300936 MODEL: ATV-15-2 12 Volt, 15 Gallon ATV Mounted Sprayer ASSEMBLY / OPERATION INSTRUCTIONS / PARTS 2.1 G.P.M. Pressure Gauge-Adjustable Pressure Range 15 Foot Handgun Hose 2 Nozzle Boom Assembly