YARWAY FLOAT TRAPS SERIES 23000, 26000, 33000
|
|
|
- Christine Cain
- 6 years ago
- Views:
Transcription
1 SERIES 23000, 26000, Series and for steam-using equipment, supporting high-volume drain discharge. Series for air and gas, achieving energy conservation through rapid drain discharge. FEATRES Steam: Series and The combination of a pair of slide balls enables ideal valve modulation according to the condensate level. Zero leakage under any operating conditions with parallel slide balls that always stay below condensation level. Rapid discharge of low-temperature drain. Continuous condensation discharge. Integral strainer. Automatic air vent for rapid start-up. Innovative outlet design to eliminate body erosion. ow operating cost. ight weight heavy-duty stainless design (Series 23300). Maintenance free design (Series 23300). Easy to maintain and long life rugged body design (Series 26000). GENERA APPICATIONS Steam: Main drip, tracing, equipment, high pressure main drip, high pressure equipment. Air/Gas: Condensate drainage of pipelines and receiver tanks TECHNICA DATA Size: DN 15-25, 40, 50, 80 (NPS ½ - 1, 1½, 2, 3) Temperature: p to 400 C (752 F) Connection: Socket weld (ASME, JIS) Flanged (ASME, JIS, JPI) Screwed (ISO 7-1) Pressure: p to 4.6MPa (667psi) Materials: Carbon steel Stainless steel Air/Gas: Series The combination of a pair of slide discs enables ideal valve modulation according to the condensate level. Zero leakage under any operating conditions with parallel slide discs that always stay below condensation level. Continuous condensation discharge. Integral strainer. ow operating cost. Easy to maintain and long life rugged body design. Innovative outlet design to eliminate body erosion. valves.emerson.com 2017 Emerson. All Rights Reserved. CTDS EN 17/05
2 SERIES 23000, 26000, BODY MATERIA Series No. Body material Series Cast steel (WCB) Stainless steel (SS304) Series Cast steel (WCB) Cast steel (WCB) Cast steel (WCB) Series Cast steel (WCB) Cast steel (WCB) Stainless steel (SS304) MAXIMM OPERATING PRESSRE Series No. Maximum operating pressure MPa (667 psi) MPa (479 psi) MPa (305 psi) MINIMM SAFETY FACTOR Design condensate Series No. flow safety factor OPTIONS Series No. Description Series Stainless steel body (code: S) ertical installation Series Manual air vent (Max. operating temperature: 426 C /799 F (code: R) Connection to pressure equalizer (code: E) Series Horizontal installation Horizontal installation ertical installation ertical installation Please contact your local sales representative for other specifications. 2
3 SERIES SERIES SOCKET WED PARTS IST No. Part Material 1 Body Cast steel (ASTM A216 Gr. WCB), A105 2 Bonnet Cast steel (ASTM A216 Gr. WCB) 3 Float assembly Stainless steel (SS304) 4 Seat holder assembly Stainless steel (SCS13A, SS304) 5 Parallel slide ball Stainless steel (SS440C) 6 Strainer Stainless steel (SS304) 7 Automatic air vent - 8 Stud bolt SNB16 9 Hex. nut A194 Gr.4 FANGED DIMENSIONS (mm) Size Weight DN (NPS) (kg) Socket weld 15 (½) (¾) (1) Flanged (JIS40KRF) 15 (½) (¾) (1) Flanged (ASME Class 600) 15 (½) (¾) (1)
4 SERIES SERIES YARWAY WCB 1 SOCKET WED PARTS IST No. Part Material 1 Body Cast steel (ASTM A216 Gr. WCB) 2 Bonnet Cast steel (ASTM A216 Gr. WCB) 3 Float assembly Stainless steel (SS304) 4 Seat holder assembly Stainless steel (SCS13A, SS304) 5 Parallel slide disc Carbon 6 Automatic air vent - 7 Screen Stainless steel (SS304) 8 Stud bolt SNB7 9 Hex. nut S45C YARWAY WCB FANGED DIMENSIONS (mm) Size Weight DN (NPS) (kg) Socket weld 40 (1½) (2) Flanged (JIS20KRF) 40 (1½) (2) Flanged (JIS40KRF) 40 (1½) (2) Flanged (ASME Class 300) 40 (1½) (2) Flanged (ASME Class 600) 40 (1½) (2)
5 SERIES SERIES YARWAY WCB SOCKET WED PARTS IST No. Part Material 1 Body Cast steel (ASTM A214 Gr. WCB) 2 Bonnet Cast steel (ASTM A214 Gr. WCB) 3 Float assembly Stainless Steel (SS304) 4 Seat holder assembly Stainless Steel (SCS13A, SS304) 5 Parallel slide disc Carbon 6 Automatic air vent - 7 Screen Stainless steel (SS304) 8 Stud bolt SNB7 9 Hex. nut S45C YARWAY WCB FANGED DIMENSIONS (mm) Size Weight DN NPS (kg) SW 50 (2) (3) Flanged (JIS10KFF) 50 (2) (3) Flanged (JIS20KRF) 40 (1½) (2) Flanged (ASME Class 150) 50 (2) (3) Flanged (ASME Class 300) 50 (2) (3)
6 SERIES SERIES DN15, DN DN25 NOTE Horizontal installation illustrated. Please contact your local sales representative to obtain the drawings for a vertical installation. PARTS IST No. Part Material 1 Body Stainless steel (SS304) 2 Float assembly Stainless steel (SS304) 3 Ball housing Stainless steel (SS304) 4 Parallel slide ball Stainless steel (SS440C) 5 Seat holder Stainless steel (SCS13A) 6 Automatic air vent - 7 Screen Stainless steel (SS304) 8 Outlet fitting (DN25 only) Stainless steel (SCS13A) SCREWED END, BSPT, SOCKET WED DIMENSIONS (mm) Size Weight DN (NPS) (kg) Screwed end, BSPT, Socket weld 15 (½) (¾) (1) Flanged (JIS10KFF) 15 (½) (¾) (1) Flanged (JIS20KRF) 15 (½) (¾) (1) Flanged (ASME Class 150) 15 (½) (¾) (1) Flanged (ASME Class 300) 15 (½) (¾) (1) NOTE 23310, 23321: Size DN (NPS ½ - 1) 23308, 23321: Size DN (NPS ½ - ¾) BSPT = British Standard Pipe Thread FANGED 6
7 SERIES SERIES SOCKET WED PARTS IST No. Part Material 1 pper body Cast steel (ASTM A216 Gr. WCB) 2 ower body Cast steel (ASTM A216 Gr. WCB) 3 Float assembly Stainless steel (SS316, SS304) 4 Seat holder assembly Stainless steel (SCS13A, SS304) 5 Parallel slide disc Carbon 6 Automatic air vent - 7 Screen Stainless steel (SS304) FANGED DIMENSIONS (mm) Size Weight DN (NPS) (kg) Socket weld 15 (½) (¾) (1) Flanged (JIS10KFF) 15 (½) (¾) (1) Flanged (JIS20KRF) 15 (½) (¾) (1) Flanged (ASME Class 150) 15 (½) (¾) (1) Flanged (ASME Class 300) 15 (½) (¾) (1)
8 SERIES SERIES SOCKET WED PARTS IST No. Part Material 1 pper body Cast steel (ASTM A216 Gr. WCB) 2 ower body Cast steel (ASTM A216 Gr. WCB) 3 Float assembly Stainless steel (SS316, SS304) 4 Seat holder assembly Stainless steel (SCS13A, SS304) 5 Parallel slide disc Carbon 6 Automatic air vent - 7 Screen Stainless steel (SS304) FANGED DIMENSIONS (mm) Size DN (NPS) (kg) Socket weld 40 (1½) (2) Flanged (JIS10KFF) 15 (1½) (2) Flanged (JIS20KRF) 15 (1½) (2) Flanged (ASME Class 150) 15 (1½) (2) Weight Flanged (ASME Class 300) 15 (1½) (2)
9 SERIES SERIES NOTE Horizontal installation illustrated. DN15, DN DN25 PARTS IST No. Part Material 1 Body Stainless steel (SS304) 2 Float assembly Stainless steel (SS304) 3 Ball housing Stainless steel (SS304) 4 Parallel slide ball Stainless steel (SS440C) 5 Seat holder Stainless steel (SCS13A) 6 Plug (equalizing connection) (horizontal installation type only) Stainless steel (SS304) 7 Screen Stainless steel (SS304) 8 Outlet fitting (DN25 only) Stainless steel (SCS13A) SCREWED END, BSPT, SOCKET WED DIMENSIONS (mm) Size Weight DN (NPS) (kg) Screwed end, BSPT, Scoket weld 15 (½) (¾) (1) Flanged (JIS10KFF) 15 (½) (¾) (1) FANGED Flanged (JIS20KRF) 15 (½) (¾) (1) Flanged (ASME Class 150) 15 (½) (¾) (1) Flanged (ASME Class 300) 15 (½) (¾) (1) : Size DN (NPS ½ - ¾). 2. Please consult your local sales representative for the dimensions of a vertical installation type. 3. The connection to equalizing port is screwed end ¼. 9
10 SERIES SERIES SOCKET WED PARTS IST No. Part Material 1 pper body Cast steel (ASTM A214 Gr. WCB) 2 ower body Cast steel (ASTM A214 Gr. WCB) 3 Float assembly Stainless steel (SS316, SS304) 4 Seat holder assembly Stainless steel (SCS13A) 5 Parallel slide disc Carbon 6 Plug (equalizing connection) Carbon steel (ASTM 105) 7 Screen Stainless steel (SS304) FANGED DIMENSIONS (mm) Size Weight DN (NPS) (kg) Socket weld 15 (½) (¾) (1) Flanged (JIS10KFF) 15 (½) (¾) (1) Flanged (JIS20KRF) 15 (½) (¾) (1) Flanged (ASME Class 150) 15 (½) (¾) (1) Flanged (ASME Class 300) 15 (½) (¾) (1)
11 SERIES 23000, 26000, CONDENSATE CAPACITY NEAR STEAM TEMPERATRE SERIES Flow rate (kg/h) PRESSRE / TEMPERATRE PMO [1] PMA [2] TMO [3] TMA [4] Fig No. (MPa) (MPa) ( C) ( C) R R Max. operating pressure 2. Max. allowable pressure 3. Max. operating temperature 4. Max. allowable temperature An 'R' suffix in Series No. indicates the provision of a manual air vent. Differential pressure (MPa) CONDENSATE CAPACITY NEAR STEAM TEMPERATRE SERIES ,000 4,000 3,000 2,500 2, PRESSRE / TEMPERATRE PMO [1] PMA [2] TMO [3] TMA [4] Fig No. (MPa) (MPa) ( C) ( C) Flow rate (kg/h) 1,500 1, Max. operating pressure 2. Max. allowable pressure 3. Max. operating temperature 4. Max. allowable temperature Differential pressure (MPa) NOTE The solid lines indicate the condensate discharge at a temperature 6 C (43 F) lower than a saturation temperature. The dotted lines indicate the condensate discharge at start-up. CATION If the differential pressure exceeds the specified limit, this product will fail closed. Please make a suitable selection. 11
12 SERIES 23000, 26000, CONDENSATE CAPACITY NEAR STEAM TEMPERATRE SERIES Flow rate (kg/h) 20,000 18,000 16,000 14,000 12,000 10,000 9,000 8,000 7,000 6,000 5,000 4,000 3,000 2, PRESSRE / TEMPERATRE PMO [1] PMA [2] TMO [3] TMA [4] Fig No. (MPa) (MPa) ( C) ( C) Max. operating pressure 2. Max. allowable pressure 3. Max. operating temperature 4. Max. allowable temperature 1, Differential pressure (MPa) CONDENSATE CAPACITY NEAR STEAM TEMPERATRE Flow rate (kg/h) PRESSRE / TEMPERATRE PMO [1] PMA [2] TMO [3] TMA [4] Fig No. (MPa) (MPa) ( C) ( C) Max. operating pressure 2. Max. allowable pressure 3. Max. operating temperature 4. Max. allowable temperature Differential pressure (MPa) NOTE The solid lines indicate condensate discharge at a temperature 6 C (43 F) lower than a saturation temperature. The dotted lines indicate the condensate discharge at start-up. CATION If the differential pressure exceeds the specified limit, this product will fail closed. Please make a suitable selection. 12
13 SERIES 23000, 26000, CONDENSATE CAPACITY NEAR STEAM TEMPERATRE SERIES Flow rate (kg/h) 2,500 2,000 1,800 1,600 1,400 1,200 1, PRESSRE / TEMPERATRE PMO [1] PMA [2] TMO [3] TMA [4] Fig No. (MPa) (MPa) ( C) ( C) Max. operating pressure 2. Max. allowable pressure 3. Max. operating temperature 4. Max. allowable temperature Differential pressure (MPa) CONDENSATE CAPACITY NEAR STEAM TEMPERATRE SERIES Flow rate (kg/h) Differential pressure (MPa) PRESSRE / TEMPERATRE PMO [1] PMA [2] TMO [3] TMA [4] Fig No. (MPa) (MPa) ( C) ( C) Max. operating pressure 2. Max. allowable pressure 3. Max. operating temperature 4. Max. allowable temperature NOTE The lines indicate condensate discharge at a temperature 6 C (43 F) lower than a saturation temperature. CATION If the differential pressure exceeds the specified limit, this product will fail closed. Please make a suitable selection. 13
14 SERIES 23000, 26000, CONDENSATE CAPACITY NEAR STEAM TEMPERATRE SERIES Flow rate (kg/h) 1, / PRESSRE / TEMPERATRE PMO [1] PMA [2] TMO [3] TMA [4] Fig No. (MPa) (MPa) ( C) ( C) Max. operating pressure 2. Max. allowable pressure 3. Max. operating temperature 4. Max. allowable temperature Differential pressure (MPa) CONDENSATE CAPACITY NEAR STEAM TEMPERATRE SERIES Flow rate (kg/h) 5,000 4,000 3,000 2,000 1,500 1, HP PRESSRE / TEMPERATRE PMO [1] PMA [2] TMO [3] TMA [4] Fig No. (MPa) (MPa) ( C) ( C) HP Max. operating pressure 2. Max. allowable pressure 3. Max. operating temperature 4. Max. allowable temperature Differential pressure (MPa) NOTE The lines indicate discharge at an ambient temperature. CATION If the differential pressure exceeds the specified limit, this product will fail closed. Please make a suitable selection. 14
15
16 EMERSON AES & CONTROS valves.emerson.com All Emerson trademarks and logos are owned by Emerson. All other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Emerson reserves the right to change product designs and specifications without notice. Emerson is an equal opportunity employer Emerson. All rights reserved.
Fig B34 Carbon Steel 'T' Type or Basket Type Strainers
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
IBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M10Si ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
SCA Series Steel Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
MFP14, MFP14S and MFP14SS Automatic Pumps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M21Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
PV4 and PV6 Piston Valves
Description The and are piston isolation valves that have been designed for use on steam, condensate and other liquid sytems. Available types: and Piston ¾" shown Screwed, butt weld and socket weld connections
M10F Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
KTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES
OMNI-II, a new generation of ball valves with OW-E fugitive emission certification, cavity relieving seats and ease of automation FEATURES GENERA APPICATIONS Chemical, petrochemical, pulp and paper, reactive
S and SF Series Cast Iron Inverted Bucket Steam Traps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Kunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
Spiratec ST14, ST16 and ST17 Sensor Chambers and Sensors
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
High performance safety valve for the protection of large boilers and superheaters, certified to ASME Section I.
Steam Safety Valve 9100 SAPAG High performance safety valve for the protection of large boilers and superheaters, certified to ASME Section I. Features National Board Certified to ASME I (3% overpressure,
Series Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features
Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications
KTM Jacketed Ball Valves Full bore and Reduced bore
KTM jacketed ball valve, designed with full flange to flange welded jacket, to effectively maintain the temperature of the media Features General applications Temperature-dependent viscosity fluid: heavy
AN ISO 9001:2008 CERTIFIED COMPANY. Safety Valve
AN ISO 9001:2008 CERTIFIED COMPANY Safety Valve SAFETY VALVE FEATURE : - The Cr-V spring & novel disc & seat design provide reliable bubble tight seal. - Excellent re-seating ability - It features heavy-duty
HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
DP143, DP143G and DP143H. Pilot Operated Pressure Reducing Valves with Cast Steel Bodies
TI-P006-01 CH Issue 8 DP143, DP143G and DP143H ISO 9001 Pilot Operated Pressure Reducing Valves with Cast Steel Bodies Cert. No. LRQ 0963008 Description The DP143, DP143G and DP143H pilot operated pressure
UNA 13 UNA 15 UNA 15 Stainless Steel Design. Installation Instructions Steam Traps UNA 13, UNA 15
UNA 13 UNA 15 UNA 15 Stainless Steel Design Installation Instructions 810604-01 Steam Traps UNA 13, UNA 15 1 Contents Important Notes Page Use... 7 Safety note... 7 Danger... 7 Explanatory Notes Scope
Series Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.
7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on
ABV21i and ABV40i Air Actuated Boiler Blowdown Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
KEYSTONE FIGURE 250D AND 251D HYGIENIC PRODUCTS
Double block and bleed style stainless steel butterfly valves F250D for imperial tubing F251D for metric tubing FEATURES Keystone proven valve and actuator technology Failsafe pneumatic interlocks Fully
FT47 SG Iron Ball Float Steam Traps (DN15 to DN50)
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
KTM V-PORT CONTROL BALL VALVE FULL BORE AND REDUCED BORE
A rugged, long-life V-port control ball valve with excellent flow characteristics for various fluids including slurries and fibers FEATURES GENERAL APPLICATION Steam, liquids, gas or critical services
ORIFICE PLATE flow meters
ORIFICE PLATE flow meters 1 Differential pressure and pressure loss When a throttle element is interposed in a closed passage of fluid in piping, a difference is produced between the pressure upstream
Pamphlet M0000. Three-in-One Pressure Regulator, Separator, and Steam Trap COSPECTR PRESSURE REDUCING VALVES
Pamphlet M0000 COSPECTR PRESSURE REDUCING VALVES Three-in-One Pressure Regulator, Separator, and Steam Trap COSPECT: Three-in-One Design A Product of Advanced Fluid Control Technology Three sub-units combine
Two-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
Two-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180
SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body
Cast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
Floating Ball Valve - Design Features
408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting
MSC Manifolds - DIN for Steam Distribution and Condensate Collection Installation and Maintenance Instructions
1170650/3 IM-P117-17 ST Issue 3 MSC Manifolds - DIN for Steam Distribution and Condensate Collection Installation and Maintenance Instructions 1 General safety information 2 General product information
Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
BR 26d Ball valve. Stainless Steel. Application: Versions: Special versions:
Application: Stainless Steel BR 26d Ball valve Tight-closing Ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN 15
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
Two-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
Forged steel Stainless steel Fig. 60A Page 2. Forged steel Stainless steel Fig. 61A Page 4. Forged steel Stainless steel Fig.
CONA All-in-one - Steam trap station with integrated inlet and outlet valves CONA All-in-one Steam trap station with integrated inlet and outlet valves CONA B All-in-one Bimetallic steam trap PN40 - with
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
DCV1, DCV2 and DCV3 Disc Check Valves Installation and Maintenance Instructions
1340050/5 IM-P134-07 ST Issue 5 DCV1, DCV2 and DCV3 Disc Check Valves Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Commissioning
YARWAY THROTTLING VALVES HY-DROP MODEL 5817/ 5827
Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation. 5817- ASME class 1700 5827- ASME class 2700 FEATURES GENERAL APPLICATION The Hy-Drop throttling
CONA ANSI Further components / Accessories
CONA ANSI Further components / Accessories Liquid drainer ANSI150 / 300 - with flanges (Fig. 665...1) - with screwed sockets (Fig. 665...2) - with socket weld ends (Fig. 665...3) - with butt weld ends
88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
SPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
Three-Way Metal Seated Ball Valve Type 21-M
Three-Way Metal Seated Ball Valve Type 21-M Design Characteristics Split body Trunnion mounted ball with - or T-port and integral stem ive loaded stem packing Spring loaded seat system Fire Safe design
Experience In Motion. Gestra Steam Solutions Catalog
Experience In Motion Gestra Steam Solutions Catalog Contents The Flowserve Gestra Steam Trap Range 5 What Are Steam Traps? 5 Short Guide to Steam Trap Selection 6 Gestra Steam Traps, Liquid Drainers and
BALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
Two-Way Soft Seated Ball Valve Type 14-S
Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design
20090 SETTALA (MI) ITALY - Viale delle Industrie Nord, 1/A - Tel Fax
20090 SETTALA (MI) ITALY - Viale delle Industrie Nord, 1/A - Tel. +39-02-95370241 - Fax +39-02-95379342 www.steam-one.it - E-mail: info@steam-one.it Steam traps The main purpose of the steam trap is to
AWH ARMATUREN- WERK HALLE GMBH. Thermodynamic steam trap. Thermodynamic steam trap. Thermodynamic steam trap PN40. Thermodynamic steam trap PN63
TD PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3) - with butt weld ends (Fig. 640/641...4) Forged steel High temperature steel
Forged steel High temperature steel Stainless steel BR 640 / BR 641 (Y) Page 2. with system connectors. Stainless steel BR 642 / BR 643 (Y) Page 4
Thermodynamic steam traps TRACO CONA TD Thermodynamic steam trap PN40 - with flanges (BR 640/641...1) - with screwed sockets (BR 640/641...2) - with socket weld ends (BR 640/641...3) - with butt weld ends
Series 26d Ball Valve
Stainless Steel Series 26d Ball Valve Application Tight-closing ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 107 The JAMESBURY brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 107 are manual assemblies consisting of the JAMESBURY FIRE-TITE
Bushing Viton O-ring (Other material available) Anti-Static Device
Triac 88 Series 3 -Piece Ball Valves feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with
O-180/780 Series ORIFLO METER COST EFECTIVE FLOW MEASUREMENT FOR LIQUIDS AND GASES GENERAL FEATURES MAIN APPLICATIONS
COST EFECTIVE FLOW MEASUREMENT FOR LIQUIDS AND GASES O-18/78 Series ORIFLO METER GENERAL O Series ORIFLO METER is a By-pass Orifice type flowmeter. Small sized variable flowmeter is installed onto measuring
Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation.
Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation. Features General application The throttling valve is designed for continuous blowdown, but also
CONA Further components / Accessories
CONA Further components / Accessories Liquid drainer PN16 / PN40 - with flanges (Fig. 665...1) - with screwed sockets (Fig. 665...2) - with socket weld ends (Fig. 665...3) - with butt weld ends (Fig. 665...4)
FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
GESTRA. GESTRA Steam Systems MK 25/2 MK 25/2S. Installation Instructions Steam Traps MK 25..., DN 40-50
GESTRA GESTRA Steam Systems MK 25/2 MK 25/2S Installation Instructions 810706-01 Steam Traps MK 25..., DN 40-50 1 Contents Important Notes Usage for the intended purpose... 8 Safety note... 8 Danger...
CE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
HANCOCK 600 GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK 600 GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
BBV Automatic or Manually Actuated Boiler Blowdown Valves DN15 to DN65
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development improvement of the product, we reserve the right to change the specification without
Hopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20
Hopkinsons SCHEDULE OF SHELL BOILER MOUNTINGS Quality assurance Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been
HIGH PERFORMANCE BUTTERFLY VALVE
Figure HPA BUTTERFLY VALVES Features: Bi-directional Bubble-tight Shutoff Suitable for Saturated Steam Service to 150 PSI Angled Disc Available in Wafer (3 to 12 ) or Lug (3 to 24 ) Stocked in Carbon by
15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
Series 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
M80i ISO Stainless Steel Ball Valve for Sanitary Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Installation and Maintenance Manual Duplex Pressure Powered Pump Package Unit with Insulation Jacket and Condensate Recovery Meter PPPPU-D
Installation and Maintenance Manual Duplex Pressure Powered Pump Package Unit with Insulation Jacket and Condensate Recovery Meter PPPPU-D Energy Conservation Environment Process Efficiency www.forbesmarshall.com
Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
High temperature steel Fig. 600 Page 8. High temperature steel Fig. 600 Page 10. High temperature steel Fig. 600 Page 12
Bimetallic steam trap CONA B ANSI Bimetallic steam trap Bimetallic steam trap ANSI150 / - with flanges (Fig. 600/601...1) - with screwed sockets (Fig. 600/601...2) - with socket weld ends (Fig. 600/601...3)
Grey cast iron Fig. 610 Page 2. Forged steel Stainless steel Fig. 610/612 (Y) Page 4
Thermostatic steam trap CONA M Thermostatic steam trap Thermostatic steam trap PN16 - with flanges (Fig. 610...1) - union with butt weld ends (Fig. 610...5) Grey cast iron Fig. 610 Page 2 Thermostatic
THROUGH CONDUIT VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES THROUGH CONDUIT VALVES Ed. 01/DIC-2004 SITINDUSTRIE reserves the right to change, without notice, 1/14 SITINDUSTRIE TRIE VALVE DIVISION We are pleased to introduce you to the
SICCA SCC Type Series Booklet
Swing Check Valve SICCA 150-600 SCC Class 150-600 NPS 2-24 Inches Type Series Booklet Legal information/copyright Type Series Booklet SICCA 150-600 SCC All rights reserved. The contents provided herein
Two-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
Single Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
BR 14b / BR 14c Application:
High - Performance Butterfly valve BR 14b / BR 14c Application: Tight-closing, double-eccentric butterfl y control valve especially for the chemical industry where aggressive media s are used, for example
Technical Data P3 PISTON POWER PUMP NON-ELECTRIC CONDENSATE PUMP SD 9952B
Technical Data SD 9952B SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NEW YORK, 12586-2035 P3 PISTON POWER PUMP NON-ELECTRIC CONDENSATE PUMP Pressures To 250 PSIG (20.7 barg) Temperatures
PIG VALVES NPS 6 20 Class
PIG VALVES NPS 6 20 Class 150-900 APPLICATION Pig valves are designed for loading and receiving cleaning pigs and detecting tools at pipelines transporting: natural gas; oil products. Operating temperature
Yarway Narvik Ven-Temp Desuperheater Model 25
Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power, pulp and paper industry and
Forged steel High temperature steel Stainless steel Fig. 640/641 (Y) Page 2. High temperature steel Fig. 640/641 (Y) Page 6
Thermodynamic steam trap CONA TD Thermodynamic steam trap Thermodynamic steam trap PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3)
HANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
Multiway Ball Valve with Vertical In-/Outlet Metal Seated. Type 24-M. Approvals
Multiway Ball Valve with Vertical In-/Outlet Metal Seated Type 24-M Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe
YARWAY HIGH PRESSURE GLOBE VALVE
In line repairable high pressure globe valve designed to provide maximum service life with minimum maintenance FEATURES GENERAL APPLICATION These valves have become the established stop valve in all modern
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION ON-OFF 2,3-WAY GLOBE VALVE YAD-112Q1/11231 Series YAC-31231 Series YAC-31281 Series http://www.proval.co.kr [B-8] GENERAL The single soft seat control valves are designed
Fisher Z500 Severe Service Ball Valves
Z500 Ball Valves D099X0 Product Bulletin 5.:Z500 April 06 Fisher Z500 Severe Service Ball Valves This bulletin covers Fisher NPS / 6 Z500 Severe Service Ball Valves. The Z500 severe service ball valve
F250D/F251D HYGIENIC BUTTERFLY VALVES PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) DOUBLE BLOCK AND BLEED STYLE BUTTERFLY VALVES
PENTAIR HYGIENIC PROCESS VAVES (FORMERY KEYSTONE) F250D/F251D HYGIENIC BUTTERFY VAVES DOUBE BOCK AND BEED STYE BUTTERFY VAVES FOOD & BEVERAGE PROCESS SOUTIONS PROCESS VAVE TECHNOOGY PENTAIR HYGIENIC PROCESS
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER
Series 3331 Pneumatic Control Butterfly Valve Type 3331/BR 31a
Series 3331 Pneumatic Control Butterfly Valve Type 3331/BR 31a Application Control butterfly valve for use in process engineering and industrial applications to meet high demands Suitable for liquids,