Raw Material and Energy Surcharges USD/lb.
|
|
- Blake Davidson
- 5 years ago
- Views:
Transcription
1 If an alloy you purchase is not listed, call Carpenter within the U.S. at Outside the U.S., visit and click "Request Quote" to contact a sales office near you. STAINLESS STEELS CarTech 15-15HS Stainless CarTech 15-15LC Modified Stainless CarTech 20Cb-3 Stainless CarTech 20Mo-6 Stainless CarTech 302HQ-FM Stainless CarTech 316L-SCQ Stainless CarTech 13-8 Stainless CarTech 15Cr-5Ni CarTech 18Cr-2Ni-12Mn CarTech 18Cr-3Ni-12Mn CarTech 21Cr-6Ni-9Mn CarTech 22Cr-13Ni-5Mn CarTech 275 Stainless CarTech 302HQ-SFQ Stainless CarTech Custom 631 (17Cr-7Ni) CarTech 15-7PH Stainless CarTech Custom 630 (17Cr-4Ni) Stainless CarTech No. 5-F Stainless (Type 416 Mod) CarTech 302 Stainless CarTech 302/304/304L Stainless CarTech 303 Stainless CarTech 303 Se Stainless CarTech 304/304L Stainless CarTech 305 Stainless CarTech 309 Stainless CarTech 310 Stainless CarTech 316/316L Stainless CarTech 316L Stainless CarTech 321 Stainless CarTech 347 Stainless CarTech 403 Stainless CarTech 410 Stainless CarTech 416 Stainless
2 CarTech 416 (No. 5) Stainless CarTech 416 RS Stainless CarTech 416BQ Stainless (No. 5BQ) CarTech 420 Stainless CarTech 420 Mod Stainless CarTech 420F Stainless CarTech 430 Stainless CarTech 430F Stainless CarTech 430FR Stainless CarTech 431 Stainless CarTech 434 Stainless CarTech 440A Stainless CarTech 440C Stainless CarTech 440F-Se Stainless CarTech 446 Stainless CarTech 204-Cu Stainless CarTech Consumet 304L-SCQ CarTech Custom 450 Stainless CarTech Custom 455 Stainless CarTech Custom 465 Stainless CarTech Custom 475 Stainless CarTech Custom Flo 302HQ Stainless CarTech EnduraMet 2205 Stainless CarTech Gall-Tough PLUS Stainless CarTech Gall-Tough Stainless CarTech 15Cr-5Ni Project 70+ Stainless CarTech Custom 630 Project 70+ Stainless CarTech 303 Project 70+ Escomatic Quality CarTech 303 Project 70+ Stainless CarTech 304/304L Project 70+ Stainless CarTech 316/316L Project 70+ Stainless CarTech 416 Project 70+ Stainless CarTech Pyrowear 675 Stainless CarTech SCF 19 Alloy CarTech 304H Stainless CarTech 410 Mod Stainless
3 CarTech TrimRite Stainless CarTech 409Cb Stainless CarTech 409Cb High Nickel Stainless AEROSPACE AND HIGH TEMPERATURE ALLOYS CarTech A-286 Alloy CarTech Alloy CarTech CarTech Greek Ascoloy CarTech L-605 Alloy CarTech Waspaloy CarTech 350 (Pyromet 350) CarTech 355 (Pyromet 355) CarTech 41 (Pyromet 41) CarTech 600 (Pyromet 600) CarTech 625 (Pyromet 625) CarTech 680 (Pyromet 680) CarTech 706 (Pyromet 706) CarTech 718 (Pyromet 718) CarTech 720 (Pyromet 720) CarTech 80A (Pyromet 80A) CarTech 882 (Pyromet 882) CarTech 901 (Pyromet 901) CarTech CTX-1 (Pyromet CTX-1) CarTech CTX-3 (Pyromet CTX-3) CarTech CTX-909 (Pyromet CTX-909) CarTech X-750 (Pyromet X-750) CarTech Thermo-Span Alloy CarTech 286-LNi Alloy MAGNETIC, CONTROLLED EXPANSION AND ELECTRICAL ALLOYS CarTech 485 Alloy CarTech 22-3 High Thermal Expansion CarTech Electrical Iron
4 CarTech Glass Sealing "42-6" CarTech Glass Sealing CarTech Glass Sealing CarTech High Permeability "49" Alloy CarTech HyMu "80" Alloy CarTech HyMu "80" Mark II Alloy CarTech HyMu "80" Mark III Alloy CarTech HyMu "800" CarTech Invar 36 Alloy CarTech Low Expansion "42" Alloy CarTech Low Expansion "42" Thermostat CarTech Low Expansion 43-PH CarTech Nickel 200 Alloy CarTech Nickel 201 Alloy CarTech Nickel 205 Alloy CarTech Silicon Core Iron "A-FM" CarTech Silicon Core Iron "B" CarTech Silicon Core Iron "B-FM" CarTech Temperature Compensator "30" Type 2 CarTech Temperature Compensator "30" Type CarTech Temperature Compensator "32" CarTech Chrome Core 8-FM Alloy CarTech Chrome Core 12-FM Alloy CarTech Chrome Core 13-FM CarTech Chrome Core 13-XP CarTech Chrome Core 18-FM Alloy CarTech Free-Cut Invar "36" Alloy CarTech High Expansion 20Ni-6Mn CarTech High Expansion CarTech Hiperco 27 Alloy CarTech Hiperco 50 Alloy CarTech Hiperco 50 HS Alloy CarTech Hiperco 50A Alloy CarTech Hy Mu 77 Alloy CarTech Hy-Ra "49" Alloy CarTech Kovar Alloy
5 CarTech MagneDur 20-4 Alloy CarTech No. 1 JR Type 1 Alloy CarTech No. 1 JR Type 2 Alloy CarTech Rotelloy 3 Alloy CarTech Rotelloy 8 Alloy CarTech Thermocouple Iron Type JP CarTech Mumetal MEDICAL ALLOYS CarTech BioDur 108 Alloy CarTech BioDur 22Cr-13Ni-5Mn Stainless CarTech BioDur 316LS Stainless CarTech BioDur 470/Custom CarTech BioDur Carpenter CCM Alloy CarTech BioDur TrimRite Stainless CarTech Micro-Melt BioDur Carpenter CCM Alloy CarTech Micro-Melt BioDur CCM Plus CarTech Micro-Melt BioDur CCM LS Alloy CORROSION-RESISTANT ALLOYS CarTech Alloy C CarTech MP35N* Alloy CarTech MP35N* Alloy (Tubing) CarTech Ni-Cu CarTech Ni-Cu CarTech Custom Age 625 PLUS Alloy CarTech *MP35N is a trademark of SPS Technologies, Inc. BEARING AND GEAR STEELS CarTech CarTech 52100T
6 CarTech Aero-A CarTech BG CarTech CBS CarTech CBS CarTech CBS50Nil CarTech CSS-42L CarTech Dynaflex CarTech L CarTech Lesco CarTech Pyrowear Alloy CarTech M CarTech QC CarTech QC ALLOY STEELS CarTech 16NCD CarTech 300M CarTech CarTech 35NCD CarTech 4130, 4140, CarTech 4319, 4320, CarTech 4330+V, 4335+V CarTech 4340 VV CarTech CarTech 4340L CarTech 4340L CarTech CarTech CarTech 9310 V V CarTech 9310, CarTech AerMet 100 Alloy CarTech AerMet 310 Alloy CarTech AerMet 340 Alloy CarTech AF CarTech No. 158 Alloy
7 CarTech D6AC CarTech GNB CarTech HP CarTech HP CarTech HTC CarTech HY CarTech HYTUF CarTech L CarTech NiMark Alloy CarTech NiMark+A273 Alloy 250-LR CarTech NiMark Alloy CarTech Nitralloy CarTech Nitralloy N CarTech PremoMet Alloy CarTech QM CarTech UT CarTech UT SPECIALTY ALLOYS CarTech AEREX CarTech JETHETE CarTech QS CarTech XM SPECIAL PURPOSE ALLOYS CarTech 180 Alloy CarTech CBX Cupron Alloy CarTech Cupron Alloy CarTech Evanohm Alloy R CarTech Manganin CarTech NIAL Alloy CarTech NIAL Alloy / Low Resistivity NIAL CarTech PCLW-SNX Alloy CarTech Tophel Alloy CarTech Tophet Alloy A
8 CarTech Tophet Alloy C VALVE STEELS CarTech 31V (Pyromet 31V) CarTech 751 (Pyromet 751) CarTech 80A (Pyromet 80A) Valve HIGH SPEED STEELS (not applicable to powder products) CarTech M1 - Tatmo CarTech M2 - Double CarTech M2 - Double 6-XL CarTech M2 - HS CarTech M2 - HS29-XL CarTech M3I - Corsair CarTech M3II - Crusader CarTech M4 - Stark CarTech M7 - Tatmo-VN CarTech M11 - Vancomo CarTech M33 - Kelvan CarTech M35 - HS CarTech M42 - Dynamax CarTech M50 - CM CarTech M CarTech M52 - CM CarTech T15 - Dynavan CarTech Abscido CarTech Supersaw TOOL STEELS (not applicable to powder products) CarTech A2 - Select-B CarTech A6 - Lesco A CarTech A7 - BR CarTech A7 - Brickmold
9 CarTech A8 - MGR CarTech A8+ - MGR-MQ CarTech A9 - Mazeman CarTech A10 - Graph-Air CarTech A18 - Whitebear CarTech D2 - Olympic CarTech D3 - GSN CarTech D4 - GSN+Mo CarTech D5 - Riptide CarTech D7 - BR CarTech H10 - Dart CarTech H11 - Dycast CarTech H11+ - Dycast-VAR CarTech H12 - L.P.D CarTech H13 - VDC CarTech H13+ - VDC-MQ CarTech H VDC-RF CarTech H13-FM - Viscount CarTech H14 - Lumdie CarTech H19 - Lesco CarTech H21 - CLW CarTech H26 - H26 Mod CarTech H43 - Lesco CarTech L6 - Montana CarTech O1 - Badger CarTech O6 - Graph-Mo CarTech O7 - Lesco O CarTech S1 - XL -Chisel CarTech S2 - Trident CarTech S4 - Damascus CarTech S5 - Lanark CarTech S7 - Bearcat CarTech S7+ - S7-MQ CarTech CAT CarTech Chipper CarTech HC-H
10 CarTech Lescowear CarTech LSC CarTech Mandrel CarTech Staminal CarTech Typlex CarTech 420-FM - Saxman-FM CarTech 420SS - Saxman6R Micro-Melt High Speed Steels (powder products) CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt CarTech Micro-Melt HS CarTech Micro-Melt M CarTech Micro-Melt M4T2 Plus CarTech Micro-Melt M CarTech Micro-Melt M48LS CarTech Micro-Melt M48HS CarTech Micro-Melt M CarTech Micro-Melt Maxamet CarTech Micro-Melt T CarTech Micro-Melt T CarTech Micro-Melt T15 Plus Micro-Melt Cold Work Tool Steels (powder products) CarTech Micro-Melt CD# CarTech Micro-Melt PD# CarTech Micro-Melt PD# CarTech Micro-Melt A11LVC CarTech Micro-Melt A CarTech Micro-Melt Thermowear CarTech Micro-Melt MCV CarTech Micro-Melt 420CW
11 Conversion Services (Natural Gas Surcharges) Process 1 - Non-Ti Air Cool Process 2 - Non Ti Fce Cool Process 3 - General Ti Process 4 Special Processing Process 5 - Machining Only Process 6 - Remelt Only Unless otherwise noted, trademarks reg. U.S. Pat. & Tm. Off. to CRS Holdings, Inc., a subsidiary of Carpenter Technology Corporation.
Raw Material and Energy Surcharges USD/lb.
If an alloy you purchase is not listed, call Carpenter within the U.S. at 800-654-6543. Outside the U.S., visit www.cartech.com and click "Request Quote" to contact a sales office near you. STAINLESS STEELS
More informationRaw Material and Energy Surcharges USD/lb.
If an alloy you purchase is not listed, call Carpenter within the U.S. at 800-654-6543. Outside the U.S., call 1-610-208-2000, press 2 for Customer Service. Chrome-based (powder products) CarTech Micro-Melt
More informationSize Range. Cold Drawn: 6.35 mm 88.9 mm 0.25 in 3.5 in. Cold Drawn: 6.35 mm 35 mm 0.25 in 1.25 in. Hot Worked: 20 mm 450 mm 0.75 in 17.
Bar Size Range Cold Drawn: 6.35 mm 88.9 mm 0.25 in 3.5 in Hot Worked: 20 mm 450 mm 0.75 in 17.7165 in Cold Drawn: 6.35 mm 35 mm 0.25 in 1.25 in Hot Worked: 20 mm 450 mm 0.75 in 17.7165 in Cold Drawn: 15
More informationPRODUCT GUIDE LANDSCAPE LIGHTING
PRODUCT GUIDE LANDSCAPE LIGHTING North America fxl.com FINISHES Metals AB Antique Bronze on Powder coat Standard AB Antique Bronze on Brass AT Antique Tumbled on AT Antique Tumbled on Brass CU BS Natural
More informationPRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company
PRODUCT GUIDE LANDSCAPE LIGHTING A Hunter Industries Company fxl.com FINISHES Metals Powder coat Standard Powder coat Specialty s AB on copper AB on brass AT on copper AT on brass CU BS SS NP BZ DG WI
More informationCeramics for pyrometers, furnace construction & laboratory ware. Schunk Ingenieurkeramik
Ceramics for pyrometers, furnace construction & laboratory ware Schunk Ingenieurkeramik Advantages High dimensional tolerance Very good thermal shock resistance Chemical corrosion resistance High heat
More informationDesign Study for Passive Shutdown System of the PGSFR
Design Study for Passive Shutdown System of the PGSFR 2015. 10. 20 Lee, Jae-Han Koo, Gyeong-Hoi 20151021 IAEA TM on passive shutdown system 1 1. Reactor Control and Shutdown Concepts of PGSFR 6 Primary
More informationdjangoproject.com skillsapp.com for invite)
DATA DESIGN MEANING djangoproject.com skillsapp.com (tweet @skillsapp for invite) VISUALIZATION SRSLY, GUISE DATA? PROFIT MEANING! acquire parse filter mine represent refine interact acquire parse filter
More informationVacuum Automation 2.1. The future depends on good product choices
Vacuum Automation 2.1 The future depends on good product choices Combined pump and gripper 432 433 Combined pump and gripper Introduction...434 Small...436 Medium...438 Large...452 Accessories...455 434
More informationRadionuclide atomic number A 1 (TBq) A 1 (Ci) A 2 (TBq) A 2 (Ci) (TBq/g) (Ci/g) Ac-225 Actinium(89) x x
Ac-225 Actinium(89) 0.6 16.2 1x10-2 0.270 2.1x10 3 5.8x10 4 Ac-227 40 1080 2x10-5 5.41x10-4 2.7 7.2x10 1 Ac-228 0.6 16.2 0.4 10.8 8.4x10 4 2.2x10 6 Ag-105 Silver(47) 2 54.1 2 54.1 1.1x10 3 3.0x10 4 Ag-108m
More informationPRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting
P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard
More informationCombined pump and gripper Medium
VGS 3010 H D W Dimension and connection W D H Feed pressure Vacuum Exhaust/blow mm mm mm 1 Housing VGS3010 23 30 Ø6 mm, 3x G1/8", M5 2 COAX cartridge 2:1 No COAX cartridge 65 2:2 COAX cartridge 2-stage
More informationSENTRON VL Series Product Specifications
SENTRON VL Series Product Specifications VL 400 Frame 400 s Electronic Releases ETU TRIP RELEASE 315 12-315 3VL4731 - A 3-0AA0 400-400 3VL4740 - A 3-0AA0 3 = 3 poles All VL400 circuit-breakers are shipped
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationTie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
More informationAIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
More informationHigh Temperature Ferric Chloride Etching
High Temperature Ferric Chloride Etching An Evaluation of the Process Randy Markle Chemcut Materials Steel 1020 0.2%C, 0.45%Mn, 0.25%Si 301 Stainless Steel 17%Cr, 7%Ni, 0.15%C 304 Stainless Steel 18.5%Cr,
More informationDelivery program. Carbon steel and stainless steel tubes in a wide range of qualities and dimensions. Distribution
Delivery program Carbon steel and stainless steel tubes in a wide range of qualities and dimensions Distribution Our value proposition The reliable supply of high-quality steel tubes and customized service
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationM/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
More informationSizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 206 Series 5E electromechanical axis New Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high dynamics
More informationBlade Fuses - Illuminated Mini Blade
Photo Fuse Features: The photo fuse is designed for the automobile and electrical industry. It has become the original equipment circuit protection standard for automobiles, trucks and low power system.
More informationFLUID POWER COMPONENTS & SYSTEMS
FLUID POWER COMPONENTS & SYSTEMS Page Thank you for your interest in Motion Controls LLC. We have been building high quality air and hydraulic cylinders for 50 years in the USA. Motion Controls LLC is
More informationR-6160 Rooftop Condenser (24,000 BTU) R-4500 Rooftop Condenser (45,000 BTU) RED DOT UNITS CONDENSERS. Crash/Fire/Rescue
RED DOT UNITS R-4500 Rooftop Condenser (45,000 BTU) Crash/Fire/Rescue Dual Evaporators Our largest power condenser, the R-4500 is a dual-fan unit with the capacity needed for high-performance evaporators
More informationSelf-mounting solution. Frameless solution. General features 30HS 55HS 55HM 75HS 75HM 100HS 100HM 125HS 150HS. Overall Dimensions
SKAL LINEAR MOTOR (English Version) MOTOR TECHNOLOGY LT MOTEC HOUSE, CHAKIRK BUSINESS PARK, STOCKPORT, CHESHIRE SK6 3NE ENGLAN TEL: +44 (0)161 217 7100 FAX: +44 (0)161 217 7101 email: sales@motec.co.uk
More informationStrokes (mm) N/en
IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated
More informationInductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor Ideal for Narrow Mounting Space Grooved TL-G3D is ideal for high-speed pulse generator and high-speed revolution control. TL-Q2 and TL-Q5 save mounting space
More informationAlro Steel Metals Industrial Supplies Plastics
Alro Steel Metals Industrial Supplies Plastics Product Color Codes Created January 1, 2007 alro.com 888-888-ALRO 2 5 7 6 January 1, 2007 1 Alro delivers...everyday Product Color Codes Carbon Steel Bar...3
More informationPRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting
> > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance
More informationR-4500 Rooftop Condenser (45,000 BTU) R-6160 Rooftop Condenser (24,000 BTU) RED DOT UNITS CONDENSERS
RED DOT UNITS R-4500 Rooftop (45,000 BTU) FIRETRUCKS CRASH & RESCUE VEHICLES DUAL EVAPORATORS The R-4500 offers amazing performance for a light weight dual fan power condenser. Its high capacity gives
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationAK Steel Specialty Stainless Sheet & Strip Stainless Price Schedule Revised March 1, 2017
AK Steel Specialty Stainless Sheet & Strip Stainless Price Schedule Revised March 1, 2017 AK Steel Corporation Corporate Headquarters 9227 Centre Pointe Drive West Chester, OH 45069 Customer Service: 800.331.5050
More information1701NE/... electrician s chisels. 1702N extra-wide chisels. 1702N/PM extra-wide chisels with hand guards. 1702PMR hand guard for item 1702N
precision square levels made from die-cast iron with 2 prismatic bases and 2 ground at bases, 2 unbreakable vials, auracy: 0.05 m hand guards for items 1700N and 1701N carpenters wrenching bars 16 115
More informationRJ45 10/100/1000 Base-TX Tab down 1x4 Jack with Magnetic Module. Storage temperature range: -40ºC to +85ºC. LEDs. EMI Fingers (see Mechanical)
RJ45 0/00/000 Base-TX Tab down x4 Jack with Magnetic Module ARJ4A 59. x 3.60 x.50 mm / 5.40 x 3.00 x 0.54mm FEATURES: Tab down Available with or without LED Suitable CAT 5 & 6 cable and UTP Comply IEEE
More informationMarvel Industries Inc.
Page 1 of 9 CU-211 CHAIN CONTROL UNIT, HIDDEN DIRECT DRIVE ( 1 TO 1 ) END CAP INCLUDED 400 Sets / Box CU-03 CHAIN CONTROL UNIT, W/ARMS WITH REDUCTION GEAR ( 3 TO 1 ) END CAP INCLUDED 400 Sets / Box CU-05
More informationRecycling ist gut, Kreislauf ist besser Circular Economy beats pure recycling. Past Co-Chair
Recycling ist gut, Kreislauf ist besser Circular Economy beats pure recycling Past Co-Chair The Circular Economy means Decoupling Decoupling natural resource use from economic growth Published by UNEP
More informationData Sheet Model F5509 and F6509 Stainless steel differential pressure gauge
FEATURES 316L Stainless steel case and wetted parts Static pressure 16 bar or 40 bar Ingress protection IP66/NEMA 4X Compliant to DIN 16003 Dry or liquid filled Optional S3 solid front case TYPICAL USES
More informationMilroyal C. PD 3661 Effective 6/2009. MilRoyal C
Milroyal C Milroyal C Pumps Milroyal C DUPLEX with HPD Liquid End GENERAL SPECIFICATIONS Drive Polar crank design all moving parts sub merged in oil. Front end scavenging The plunger always set to top
More information8888/8810 Multi-Function Rim Exit Device & Trim 80 Series
8888/8810 Multi- Rim Exit Device & Trim The 8888/8810 Rim Exit Device Devices are A156.3 UL Fire and Panic listed Device is non-handed /BHMA architectural finishes Four standard sizes available To Order:
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationGRADES COMPARISON TABLE
GRADES COMARN TABLE CEMENTED CARBIDE M M10 U10E UTi20T U2 UX30 UTi20T A30 UX30 UMN WA10B A EX45 F S 890 IC07 M40 UM40 EX45 01 HTi05T H1 H2 N HTi10 UTi20T E G10E EH20 TH03 S05F T S15F W10 GW15 GW25 G03
More informationDurable Production Performance For Safety Critical Joints
SP-1036EN 1107 7.5M Durable Production Performance For Safety Critical Joints Cleco 18 & 48 Series Durability. Speed. E Cleco 18-48 series tools are driven by a new maintenance-free brushless motor with
More informationPRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting
> ø 3... 100 mm > Complete functional unit with LED display > TEX-zones depending on pilot control: zones &, II 3GD, Valve control module (VCM) zones 1 & 1, II GD, Pilot control on separate specification
More informationCHEMICAL CHARACTERIZATION OF PARTICULATE MATTER EMISSIONS FROM A CATALYZED TRAP EQUIPPED NATURAL GAS FUELED TRANSIT BUS
CHEMICAL CHARACTERIZATION OF PARTICULATE MATTER EMISSIONS FROM A CATALYZED TRAP EQUIPPED NATURAL GAS FUELED TRANSIT BUS Mridul Gautam, Sairam Thiagarajan, Tim Burlingame, Scott Wayne, Dan Carder Department
More informationPipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationSection 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
More informationAccessories Program Edition
Accessories Program Edition 2014-07 Contents 1 Hydraulic s... 1 A Filter set... 2 B set main/return line... 2 C Flexible tube... 3 D set Vario-5... 4 E set cooling-, separate system water... 5 F Reducing
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationKA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
More informationTie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
More informationTM ETRS-TM35FIN-ETRS89 WTG
Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared
More informationCustom Made Motorcycle Seat Cover Listing. Years Sheepskin Waterproof MB
@125 Scooter 2002-2006 DS CS11 714 CB 125 1974 DS CSD 1225 CB 125 E 2012 - DS CSD 1048 CA 250 Rebel -1994- TS CS11 403 CB 250 1996-2005 DS CSD 500 CB 250 F -2006- DS CSD 793 CB 400 2008- DS CSD 921 CB
More informationREF : 30XA1502 STD UNIT MODULE1:CKTA,CKTB MODULE 2:CKTC
Carrier s.a. BP 49 Route de Thil 01120 Montluel(FRANCE) Tel: 33 (0) 4 72 25 21 08 Fax : 33 (0) 4 72 25 23 88 REF : 30XA1502 STD UT MODULE1:CKTA,CKTB MODULE 2:CKTC LISTE DE PIECES SPECIFIED PARTS LIST DATE
More informationMANUAL & AUTOMATED BALL VALVES
ESTABLISHED 1991 STEALTH VALVE & CONTROLS LTD. The Application Solution Company Exclusive Stocking Distributor for Valves, Actuators, Instruments and Specialty Products Serving: Industrial, Power, Food
More information0 Series. 9Exit Device
0 Series 9Exit Device Copyright 2006, 2009-2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Features, Applications and UL Fire Door Ratings...1 9800
More informationBy Karmjit Sidhu, VP, Business Development American Sensor Technologies
New Differential Pressure Sensor Incorporates LVDT Technology to Create More Environmentally-Resistant, Dependable and Economical Pressure Sensing Solution By Karmjit Sidhu, VP, Business Development American
More informationThe Amodil Group. Specialists In Stainless Steel Long Products
Specialists In Stainless Steel Long Products Specialists In Stainless Steel Long Products Round Hexagon Flat Square Angle Billet Seamless Pipe & Tube Hollow Bar Fittings Over 5,000 tonnes of Stainless
More informationWHOLESALER PRICE SHEET
PRICE SHEET WHOLESALER PRICE SHEET WPS-518 Effective May 14, 2018 Replaces Price Sheet WPS-1217 Dated December 11, 2017 Minimum Billing: $125.00 These prices supersede all other quotations and are subject
More informationFuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
More informationSizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
More informationOur policy is one of continued research and development. We therefore reserve the right
Corrosion resistant design Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Magnetic Piston Double Acting Ø 32 to 100 mm Accepted in the Food Industry Conforms to ISO 6431, VDMA 24562 and NFE
More informationXG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
More informationBore size: JSC3: φ40/φ50/φ63/φ80/φ100. JSC4: φ125/φ140/φ160/φ180
764 Min. stroke length with switch ( switch) Brake cylinder: Double acting, single rod/double acting, no-lubrication -N Series : JSC3: φ40/φ50/φ63/φ80/φ100 JSC4: φ125/φ140/φ160/φ180 JIS symbol Specifications
More informationSeries 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationBI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More informationGoulds 3296 EZMAG. Chemical Process Pump
Goulds 396 EZMAG Chemical Process Pump Goulds 396 EZMAG Chemical Process Pump Capacities to 700 gpm (160 m3/h) Heads to 60 ft (189 m) Temperatures to 535 F (80 C) Pressures to 75 PSIG Performance Features
More informationSeries AM/MM/WM Mill Type Cylinders
ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents
More informationHYDRO-PNEUMATICS. 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series ) Hydro-Pneumatic Intensifiers for Machining Centers... 1.
HYDRO-PNEUMATICS 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series... 1.310 2) Hydro-Pneumatic Intensifiers for Machining Centers... 1.330 HYDRAULIC CYLINDERS 1) LH7 Series... 2.110/1 Std. Mounting
More informationEVERYWHERE. WE RE WITH You. cat oils. With parts and service promotions. The lifeblood of your equipment
WE RE WITH You EVERYWHERE With parts and service promotions. cat oils The lifeblood of your equipment Next Generation Cat Excavators More choices. More confidence. genuine Cat parts More genuine savings
More informationSMB5.0A(CA) - SMB440A(CA)
SMB5.0A(CA) - SMB440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 5.0-440 V POWER: 600Wa t t s Features Mechanical Data Glass Passivated Die Construction Uni- and Bi-Directional Versions
More informationThis pdf is chapter two of our Catalog Please refer to all five chapters to make the proper equipment choice for your needs.
This pdf is chapter two of our Catalog 4500. Please refer to all five chapters to make the proper equipment choice for your needs. Chapter 2 2 Stirred Reactors Reactor Selection Procedure: Basic Specifications
More informationMiniature Valves MH1. Extremely small, fast and versatile. Info 206
Miniature Valves MH1 Extremely small, fast and versatile Info 206 MH1 Miniature Valves Benefits and Applications of the MH1 Miniature Valve The MH1 offers maximum reliability, even in constant operation
More informationROCKY MOUNTAIN HYDROSTATICS, INC INVENTORY LIST 09/15/10
MODEL NUMBER CODE NUMBER 6.0 GOLD CUP PUMPS (98 cc) QTY STATUS / WAITING ON S13-47336-0 P6D 3R1C 4A2 B (I/R ATLAS-COPCO 52247111) 700240/700280 2 IN PROCESS-PARTS ON HAND S13-43640-0 P6P 3L1C *** B BASIC
More informationHandles Hinges Furniture
Handles Hinges Furniture ECO TYPE MI-109 Soft Closing Hinge With Cam Adjustment (50,000 Opening Cycles) MI-119 Soft Closing Hinge (0,000 Opening Cycles) HYB-5/8 Short Arm Soft Closing Hinge SHG2-09/SPG
More informationPRODUCT CATALOG. Landscape Lighting VOLUME 30. fxl.com
PRODUCT CATALOG Landscape Lighting VOLUME 30 fxl.com TABLE FX Luminaire Introduction 3 What s New 5 Designer and Standard Series 7 Lamps 113 Technical Data 117 Warranty 131 CE Approved Fixtures 130 Index
More informationCERTIFICATE OF COMPLIANCE
FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA 02062 USA T: 781 762 4300 F: 781-762-9375 www.fmapprovals.com CERTIFICATE OF COMPLIANCE HAZARDOUS LOCATION ELECTRICAL EQUIPMENT PER
More informationHigh-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
More informationWater analysis, QC and more:
Water analysis, QC and more: photoflex THE REAL MULTI COLORIMETER Standardized and easy-to-use Sturdy and waterproof Sophisticated and versatile Environmental Protection: Fish Farming and Surface Water:
More informationDL Series. Tubular Lock DL Series.qxp:DL Catalog 4/19/10 8:15 AM Page 1
90102 DL Series.qxp:DL Catalog 4/19/10 8:15 AM Page 1 DL Series Tubular Lock Copyright 2004-2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. 90102 DL Series.qxp:DL
More informationTECHNICAL PRODUCT DATA SHEET
Product bulletin CV-SE-900-DS TECHNICAL PRODUCT DATA SHEET General ROTARY CONTROL VALVES SIDE ENTRY ANSI 900 Pibiviesse Trunnion Mounted Side Entry high performance full and reduced bore control ball valves
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More informationFULL COLOR TAB #1 TA 7
FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder
More informationNEV ABLE REDUCER CORONET REDUCER FOR SERVO MOTOR
NEV 83 Right Angle Shaft Model & Type Symbol 85 Performance Table Right Angle Shaft Reduction ratio 1/3 1/5 1/9 1/15 1/27 1/45 1/75 1/105 Type Output shaft speed Rated Max. instantaneous output torque
More information"XLS" Series 5 H.P. BRIGGS & STRATTON. Supplied with rings, circlips & lightweight wrist pin
5 H.P. BRIGGS & STRATTON "XLS" Series The same race winning design and manufacturing technology that is applied to Wiseco s NASCAR piston program has been incorporated into our "XLS" Series 5HP Briggs
More informationSELECTION LIST REVISION This book contains the following models: Chevy/GMC Dodge Ford
SELECTION LIST ---------- REVISION 0 ---------- This book contains the following models: 1973-2002 Chevy/GMC 1994-2002 Dodge 1980-2002 Ford Form #64135-120102 WESTERN PRODUCTS P.O. BOX 245038 MILWAUKEE,
More informationCartridge Heaters. Application Field. Application examples
artridge Heaters pplication examples Injection moulding - Internal heating of zzles Hot runner systems - Heating of manifolds Packaging industry - Heating of welding bars Packaging industry - Heating of
More information8500 Narrow Design Rim Exit Device 80 Series
8500 Narrow Design Rim Exit Device 8500 Series Narrow Design Rim Exit Device Specifications for 8500 Series Exit Door Types Rail sizes as determined by door width Strike Dogging Feature Electric Mounting
More informationGROUP SIX Mficoticari Emoteq Division MF Series Torque Motors - Thin Ring Design - Direct Drive eliminates backlash - Extremely low cogging torque Con
GRUP SIX Mficoticari Emoteq Division MF Series Torque Motors - Thin Ring Design - Direct Drive eliminates backlash - Extremely low cogging torque Contact Us! Email Purchase Source: GRUP SIX () Te,4,2t
More informationare widely used because they provide a standardized surface for testing.
Steel Panels Steel panels are made from standard low-carbon, cold-rolled steel complying with ASTM A1008, A-109 and QQS- 698. Smooth Finish Steel Panels, Type QD have a smooth, bright finish produced at
More informationTE CONNECTIVITY SENSORS /// WIND TURBINES SENSOR SOLUTIONS FOR WIND TURBINES FROM TE CONNECTIVITY
TE CONNECTIVITY SENSORS /// WIND TURBINES SENSOR SOLUTIONS FOR WIND TURBINES FROM TE CONNECTIVITY SENSOR SOLUTIONS FOR WIND TURBINES FROM TE CONNECTIVITY TE Connectivity (TE) is a global designer and manufacturer
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationOther Information. Section 6. Contained in this section: Actuator Diaphragm Identification. How To Order. Facts and Recommended Guidelines
Section 6 Other Information Contained in this section: How To Order Maintenance Instructions Flange Gasket and Storage Recommendations Actuator Diaphragm Identification Facts and Recommended Guidelines
More informationRosemount 3051CFA Annubar Flowmeter
December 2013 Rosemount 3051 Rosemount 3051CFA Annubar Flowmeter The Rosemount 3051CFA Annubar Flowmeter utilizes the patented T-shaped sensor design that delivers best in class accuracy and performance.
More informationBI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
More informationOrchard Residences. Buckley 18 IM Flash
EMTECH BS4568 / IEC61386 CLASS 3 CONDUIT PIPE EMTECH TM GI Conduit BS4568 / IEC61386 Class 3 EMTECH TM EMT-3 Conduit Box ITE West Marina Barrage Orchard Residences Buckley 18 IM Flash data listed in this
More information3VU13, 3VU16 Circuit-Breakers
3VU3, 3VU6 Circuit-Breakers Description The 3VU3, 3VU6 circuit-breakers are compact circuit-breakers for currents up to 80 A which operate according to the current limiting principle. The devices are used
More information