Distinctive Characteristics
|
|
- Nelson Peters
- 5 years ago
- Views:
Transcription
1 Distinctive Characteristics High insulating material for 6mm CKM models withstands over 5 kilovolts of electrostatic discharge, thus providing antistatic feature. Rugged, die cast housing 9mm CKL models designed for higher security requirements. Vertically rotating switching mechanism combines with self-cleaning sliding contacts for high reliability and long operating life. 6mm and 9mm diameter bushings available. CKL and CKM on-off-on models with tubular keys have push-and-lock mechanism which allows contactor to drop and slide over stationary contacts. Available in both flat and tubular key styles; flat key is reversible for easier setting. Epoxy sealed terminals prevent entry of flux and other contaminants. Interior construction provides seal for contact area. Actual Size CKM with Tubular Key High dielectric strength of,500 volts between contacts and case. Nihon Kaiheiki Phone Fax
2 General Specifications Electrical Capacity (Resistive Load) Power Level: 50V AC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Static Capability: Nominal Operating Torque: Contact Timing: Angle of : 0 milliohms maximum,000 megohms 500V DC,000V AC minimum between contacts for minute minimum;,500v AC minimum between contacts & case for minute minimum 30,000 cycles minimum 0,000 cycles minimum Withstands 5 kilovolts minimum ESD minimum (for CKM models only) 6mm Bushing (CKM models):.04 mnm (5.67 oz in) for Flat Key.08 mnm (.33 oz in) for Tubular Key 9mm Bushing (CKL models):.05 mnm (7.08 oz in) for Flat Key.07 mnm (9.9 oz in) for Tubular Key Break-before-make for -position & for 3-position Materials & Finishes Keys for CKM: Keys for CKL: Housing/Bushing: Base: Contact Terminals: Common Terminals: Movable Contactor: Movable Contacts: Brass with nickel plating with ABS handle Brass with nickel plating for tubular key; brass with chrome plating for flat key Glass fiber reinforced PBT for CKM models; zinc alloy with chrome plating for CKL LCP (Liquid Crystal Polymer) Copper with silver plating Copper with silver plating Copper Silver Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: 5 C through +70 C ( 3 F through +58 F) 90 ~ 95% humidity for C (04 F) for CKM; 90 ~ 95% humidity for C (04 F) for CKL 0 ~ 55Hz with peak-to-peak amplitude of.5mm for CKM or 0.7mm for CKL traversing the frequency range & returning in minute; 3 right angled directions for hours 50G (490m/s ) acceleration for CKM; 30G (94m/s ) acceleration for CKL; (CKM & CKL tested in 6 right angled directions, with 5 shocks in each direction) Installation Mounting Torque: Soldering Time & Temperature:.5 Nm (3.8 lb in) maximum Manual Soldering: See Profile A in Supplement section. Nihon Kaiheiki Phone Fax
3 TYPICAL SWITCH ORDERING EXAMPLE CK M A F W 0 M BUSHINGS 6mm Diameter POLES F KEYS Flat TERMINALS L 9mm Diameter SPDT T Tubular 0 Solder Lug CIRCUITS & KEY-REMOVABLE POSITIONS Code Pos. Pos. Pos. 3 Key Removes A ON NONE ON Positions and 3 B ON NONE ON Position 3E ON OFF ON Position W CONTACT MATERIAL Silver Rated 50V AC DESCRIPTION FOR TYPICAL ORDERING EXAMPLE CKMAFW0 One key supplied with each switch SPDT ON-NONE-ON Circuit Key Removable in Positions and 3 6mm Diameter Bushing Solder Lug Terminals Silver Contacts Rated 50V AC Nihon Kaiheiki Phone Fax
4 POLES, CIRCUITS & KEY-REMOVABLE POSITIONS Pole & Model Key Positions Pos Pos Pos 3 Connected Terminals (Terminal numbers are on switch) Pos Pos Pos 3 Schematic = Key Removable = Not Removable = Maximum Arc SPDT CKMA CKLA ON NONE ON COM- COM- COM 3 SPDT CKMB CKLB ON NONE ON COM- COM- 3 SPDT CKM3E CKL3E ON OFF ON COM- OPEN COM- COM OPEN 3 KEYS F Flat Key T Tubular Key (must be pressed inward to actuate) AT447 for CKM 6mm Brass with Nickel Plating key base & ABS key handle AT453 for CKL 9mm Brass with Chrome Plating (crosshatch texture on handle) One key provided with each switch (no master key available) For ordering additional keys, indicate the same key number that is engraved on the face of your switch. Randomly assigned key number (00 through 00 for CKM models & 00 through 05 for CKL models). Typical Key Ordering Example: AT AT446 for CKM 6mm Brass with Nickel Plating key base & ABS key handle AT45 for CKL 9mm Brass with Nickel Plating (smooth) One key provided with each switch (no master key available) For ordering additional keys, indicate the same key number that is engraved on the face of your switch. Randomly assigned key number (00 through 05 for CKM models & 00 through 050 for CKL models). Typical Key Ordering Example: AT AT447 (40.8).606 (.8).07 (0.0) (0.0) (3.5).38 AT453 (49.3).94 (.3).878 (0.0) AT446 (7.0) Dia.76 (0.5) Dia.43 (6.0) (33.5).39 (9.6) Dia.378 (3.5).38 AT45 (9.0) (.5).886 (35.5).398 (.5).059 CONTACT MATERIALS, RATINGS & TERMINALS W Silver over Silver Power Level 50V AC Epoxy Seal.97 Epoxy Seal.7 0 Solder Lug Terminals Solder Lug Terminal for CKM (.7).06 Thk = (0.8).03 (.4).094 (.).047 Solder Lug Terminal for CKL (3.). (.8).0 (.4).055 Thk = (0.8).03 Nihon Kaiheiki Phone Fax
5 TYPICAL SWITCH DIMENSIONS 6mm Bushing Flat Key (0.0) (0.9) M6 P (.) x (.4).047 x.094 (9.0) Dia (.4).055 (0.0) (6.0) (35.) (4.) 0 0 POS (0.9) M6 P (.) x (.4).047 x.094 CKMAFW0 (9.0) Dia (0.0) (6.0) (35.) (4.) 6mm Bushing Tubular Key (.0) M6 P (.) x (.4).047 x.094 (9.0) Dia.984 (9.0).4.57 (6.0) (35.) (4.) 0 7 POS 07 M6 P (.) x (.4).047 x.094 CKM3ETW0 (9.0) Dia.984 (9.0).4.57 (6.0) (35.) (4.) PANEL CUTOUT & STANDARD HARDWARE FOR 6MM BUSHING Maximum Effective Panel Thickness:.469 (.9mm) (4.6).575 (6.0) Dia AT06 6mm Hex Mounting Nut for CKM included with each switch Brass with nickel plating (3.). (9.0) M6 P Nihon Kaiheiki Phone Fax
6 TYPICAL SWITCH DIMENSIONS 9mm Bushing Flat Key (.3).878 (0.7) M9 P (.4) x (.8).055 x.0 (.0) Dia (.0).039 (9.8).73 (5.4).3 (7.0) (6.8) POS M9 P (.4) x (.8).055 x.0 (0.7) CKLAFW0 (.0) Dia (0.0) (9.8).73 (5.4).3 (7.0) (6.8).66 9mm Bushing Tubular Key (9.0) M9 P (.4) x (.8).055 x (.0) Dia (.5).886 (30.5).0 (5.4).3 (7.0) (6.8).66 POS M9 P (.4) x (.8).055 x (.0) Dia (.5).886 (30.5).0 (5.4) (7.0) (6.8) CKL3ETW0 PANEL CUTOUT & STANDARD HARDWARE FOR 9MM BUSHING Maximum Effective Panel Thickness:.496 (.6mm) (7.).677 (9.0) Dia AT09 9mm Hex Mounting Nut for CKL included with each switch Brass with nickel plating (3.4).34 (.0) M9 P Nihon Kaiheiki Phone Fax
General Specifications
Series CK High Security Keylocks General Specifications Electrical Capacity (Resistive Load) Power Level: 3A @ 50V AC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More informationDistinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
More informationGeneral Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
More informationDistinctive Characteristics
Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,
More informationGeneral Specifications
Series D Light Touch Miniature Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
More informationGeneral Specifications
Series E Light Touch Miniature Pushbuttons eneral Specifications Electrical apacity (Resistive Load) Power Level (silver): A @ 25V A for silver contacts Logic Level (gold): 0.4VA maximum @ 28V A/D maximum
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
More informationDistinctive Characteristics
Distinctive Characteristics Full face and spot illumination available. Front panel relamping. Choice of super bright LEDs in white, green, and blue in addition to bright red, amber, and green LEDs. Compact
More informationGeneral Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
More informationGeneral Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
More informationWe Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
More informationGeneral Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
More informationDistinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More informationYB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons
Contact No. 182 YB2 Panel eal Thin Flush Mount Pushbuttons New quare Actuator Option 2011-01-26 www.nkk.com 1 General pecifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright
More informationGeneral Specifications
Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
More informationC&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
More informationTYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ /0V AC or A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
More informationGeneral Specifications
Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications High Inrush 0 & 6 Amp Rockers Electrical Capacity (Resistive Load) Power Level: 0A @ 5/50V AC for
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationGeneral Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
More informationGeneral Specifications
Series HB Subminiature Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 0.1A maximum @ 30V A/ Other Ratings ontact Resistance: 50 milliohms maximum Insulation
More informationGeneral Specifications
Series YB Short Body Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More informationGeneral Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationDistinctive Characteristics
Standard Size Pushbuttons istinctive Characteristics Carefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationContents Pushbuttons. AB Series...C6 0.4VA Logic Level; Process Sealed Straight, Right Angle, & Vertical PC
ontents Pushbuttons B Series... 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P BB Series... ntistatic; 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P DB Series...
More informationELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More informationY Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance omentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationGeneral Specifications
Series M Waterproof Miniature eneral Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More information1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break
Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts
More informationANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
More informationSeries 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
More information18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationS and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationSeries WP. Pushbutton Switches HOW TO ORDER. Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous
RATING: AC125V 7A, AC250V 4A. CIRCUIT: DPDT. CONTACT RESISTANCE: 20m-ohms max. @ 5VDC 1A. DIELECTRIC STRENGTH: AC 1,500V for 1 min. LIFE EXPECTANCY: 6-10 cycle / min. ELECTRICAL LIFE: 6,000 cycle. OPERATING
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More informationSP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)
DATA SHEET Order code Manufacturer code Description 75-0211 100-SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC) The enclosed information is believed to be correct, Information may change without notice
More informationToggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
More informationC&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More information7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
More informationST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINIATURE TOGGLE SWITCHES K FEATURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationGeneral Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other
More informationAV SERIES PUSHBUTTON SWITCHES Distinctive features
PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing
More informationSPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
More information5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
More information5000 SERIES - MINIATURE TOGGLE SWITCHES
000 SERES - MNATURE TOGGLE SWTCHES A SPECFCATONS SUBJECT TO CHANGE WTHOUT NOTCE FEATURES Broadest selection offered in miniature switches. SPDT, DPDT, PDT & PDT models with numerous options. Numerous configurations
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): A @ 25/250V AC or A @ 30V C ogic evel (gold): 0.VA maximum @ 28V AC/C maximum (Applicable Range 0.mA ~ 0.A @ 20mV ~ 28V)
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationPRODUCT SPECIFICATION
1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE
More informationSecurity Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
More informationGT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
More informationET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
More informationSeries 206/208 Through-Hole DIP Switch
Available with SPST, SPDT, DPST, 3PST circuitry choices Available with low profile, standard, or extended actuator heights. Consult the ordering information for options. RoHS compliant Optional top tape
More informationProduct Range. Keylock Switches. Keylock Switches. Keylock Switches
Product Range Medium Security : 2SWK, SKF Series High Security : SWK Series Main features: SPST type - 5 disc tumbler versions SPST type - 8 disc tumbler versions DPDT type - 4 disc tumbler versions All
More informationET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
More informationSPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.
SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE
More informationDistinctive Characteristics
Distinctive haracteristics arefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More informationET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
More informationSPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
More informationMomentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
More informationT Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationC&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
More informationC&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
More informationonlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
More information