TOTAL MAINTENANCE SOLUTIONS
|
|
- Elfrieda Black
- 5 years ago
- Views:
Transcription
1 VOLUME 1, NUMBER 1 TOTAL MAINTENANCE SOLUTIONS Houston, TX Toll Free 800/ Toll Free FAX 800/ Orlando, FL Toll Free 800/ Toll Free FAX 800/ Greenville, SC Toll Free 800/ Toll Free FAX 888/
2 TABLE OF CONTENTS NEW PRODUCTS Shark Bite... 1 Speedfit by John Guest Thermoresin by Jaco... 4 BRASS Compression Fittings Brass and Chrome Copper CPVC...15 Flare Fittings Flexible Fittings Fernco Flexible Fittings Galvanized and Black Iron Hose Barb Hose Fittings Insert Fittings Miscellaneous Fittings Pex Tubing and Pipe PVC/DWV PVC Sch PVC Sch Qest Fittings Repair Clamps
3 TOTAL MAINTENANCE SOLUTIONS SHARK BITE COUPLINGS SHARKBITE PUSH-FITTINGS A Connection System for Copper, CPVC or PEX Pipe END STOPS REDUCING COUPLINGS x x x SLIP COUPLINGS Simplifies Pipe Installation No soldering, clamps, unions or glue are needed Certified to 200 psi and 200 F (93 C) No loose components, fully integrated design Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hyrdonic heating distribution. Corrosion resistant, durable fitting CONNECTING A JOINT: STRAIGHT MPT CONNECTORS x x x x x x STRAIGHT FPT CONNECTORS x x x x x FPT ELBOW X TEES Mark pipe approx. 1 from end C Push the pipe firmly with a twisting action until it clicks. A B DISCONNECTING A JOINT: REDUCING TEES Push the disconnecting clip against the release collar and pull the pipe with a twisting action. ELBOWS x FPT DROP EAR ELBOW x x A B C DISCONNECTING CLIP DEPTH GAUGE/ DEBURRING TOOL
4 TOTAL MAINTENANCE SOLUTIONS MAKING A A B CONNECTION 1. Cut Tube Square O Ring REDUCERS END CAPS CTS Size (CTS) CTS CTS Stem x Pipe C A A B C REDUCING TEES A B C REDUCING UNION Tube OD Tube OD / FAUCET CONNECTOR UNION TEES / Push the tube into the fitting, up to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position, while the o-ring provides a permanent leak-proof seal. 3. Pull to Check it s Secure Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving the site and/or before use. UNS Thread UNION ELBOWS Cut the tube square. It is essential that the outside diameter be free of score marks and that burrs and sharp edges be removed before inserting into the fitting. For soft or thin-walled plastic tubing we recommend the use of a tube insert. 2. Push Up to Stop B C UNION TEES Collet Stainless Steel Teeth STACKABLE TEE Tube OD Thread /4 7/ /16-24 DISCONNECTING Push in Collet and Remove Tube To disconnect, ensure the system is depressurized before removed the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used. UNION CONNECTORS UNION ELBOWS / UNION CONNECTORS / REDUCER Stem OD Tube OD 1/4
5 TOTAL MAINTENANCE SOLUTIONS PLUG Stem OD /4 BRASS MALE STEM ADAPTER Size (CTS x NPT) x x ANGLE STOP ADAPTER VALVE Male Comp. Female Comp. Tube OD / Above fitting is for cold water applications only SHUT-OFF VALVE Tube OD Thread /4 1/ /4 SpeedFit to Female, NPTF Elbow NPTF Thread FIXED ELBOW Tube OD Thread /4 1/8 BRASS FEMALE STEM ADAPTER CTS x NPSM TUBE CUTTER Speedfit to Speedfit SHUT-OFF VALVE / FEMALE DROP EAR ELBOW CTS x NPT PIPE CUTTER Heavy Duty Pipe Cutter TUBING (NOT SHOWN) /4 blue natural COLLET LOCKING/ RELEASE TOOL /4 and MALE CONNECTOR CTS x NPT CTS x NPT 3
6 THERMORESIN UNION TEES / / / /8 FEMALE CONNECTORS Tube OD Pipe Thread /4 1/ / INSTALLATION INSTRUCTIONS FOR JACO TUBE FITTINGS 1. Cut the tubing end squarely and remove the inernal and external burrs. 2. insert the tubing through the back of the nut all the through the nut assembly to the tube stop in the fitting body (see illustration). If the tube does not enter the nut easily, loosen the nut one turn and then insert the tubing all the way to the tube stop in the fitting body. 3. Turn the nut hand tight 4. Wrench tighten the nut 1-1/2 2 turns. 5. All nuts must be retightened when the system reaches projected operating temperature. NOTE: Squeaking sound when tightening nut is normal. For pipe threaded connections, Teflon Tape* must be used. UNION CONNECTORS MALE ELBOWS Tube OD Thread /8 1/ /4 1/ /4 1/ / / /8 Tube OD / / /8 REDUCING UNIONS Tube OD /4-1/ /8-1/ /2-3/8 MALE CONNECTORS Tube OD Pipe Thread /8 1/ /4 1/ /4 1/ / / / FERRULE NUTS WITH INTEGRAL SLEEVE Tube OD / / CAUTION: To insure proper assembly, tubing MUST be fully inserted into the fitting body of the tube stop. * Dupont s Reg. T.M. Patent 1983 PLASTIC GRIPPER NUTS Tube OD / KYNAR Check Valves have the following features: Viton O-ring Stainless Ball & Spring Maximum Operating Temperature of 220 psi at 180 F Zero Leakage Male Pipe NPT Style KYNAR CHECK VALVES /4 Male Pipe NPT Male Pipe NPT NEED A FITTING NOT LISTED HERE? CALL US! 4
7 BRASS COMPRESSION FITTINGS C FIP ADAPTERS Tube OD FIP /4 1/ /4 1/ / / / / / / / / /8 FIP ELBOWS OD x 1/4 FIP OD x FIP /4 OD x 1/4 FIP OD x FIP /8 OD x FIP /8 OD x FIP MIP ADAPTERS Tube OD MIP /8 1/ /4 1/ /4 1/ / / /16 1/ /16 1/ / / / / / / / / /8 COMPRESSION CAPS / /8 A B COMPRESSION TEES / / / /8 A B C / /8 5/8 COMPRESSION UNIONS / / / /8 REDUCING UNIONS x 1/ x /8 x /8 x 5
8 TOTAL MAINTENANCE SOLUTIONS BRASS COMPRESSION FITTINGS COMPRESSION ELBOWS STRAIGHT NEEDLE VALVES / / / / / x 1/ /4 OD x 1/4 OD OD x OD OD x 1/4 OD SELF PIERCING NEEDLE VALVE KIT MALE COMPRESSION ELBOWS Tube OD MIP /4 1/ / / COMPRESSION PLUGS / /8 COMPRESSION NUTS COMPRESSION SLEEVES / / / / / / / / / / /8 6
9 BRASS & CHROME PLATED COMPRESSION FITTINGS TEES Size Brass Chrome- Plated Brass 1/ / / PLUGS Size Brass Chrome-Plated Brass 1/ / COUPLINGS Size Brass Chrome-Plated Brass 1/ / / REDUCING TEES x x x 1 x ELBOWS 45 ELBOWS Size Brass Chrome-Plated Brass 1/ / / Size Brass Chrome-Plated Brass 1/ / / x x REDUCING COUPLINGS Size Brass Chrome-Plated Brass 1/4 x 1/ x 1/ x 1/ x x 1/ x x x x x
10 BRASS & CHROME PLATED COMPRESSION FITTINGS 90 STREET ELBOW Size Brass Chrome-Plated Brass 1/ / STREET ELBOW Size Brass Chrome-Plated Brass CHROME PLATED BRASS REDUCING ELBOW Size x 1/ x x CAPS Size Brass Chrome-Plated Brass 1/ / FACE BUSHING Size Brass Chrome-Plated Brass x x x x ROUGH BRASS CROSS Size / HEX BUSHINGS Size Brass Chrome-Plated Brass 1/4 x 1/ x 1/ x 1/ x 1/ x 1/ x x 1/ x x x x /4 x 1/ /4 x x x 1-1/ x UNIONS Size Brass Chrome-Plated Brass 1/
11 BRASS & CHROME PLATED COMPRESSION FITTINGS BRASS AND CHROME-PLATED BRASS PIPE NIPPLES Size Close / / / LONG PIPE NIPPLES X 12 Chrome plated x 12 Chrome plated x 12 Brass 9
12 COPPER REDUCING COUPLING /4" I.D. x 1/8" I.D /8" I.D. x 1/4" I.D /2" I.D. x 3/8" I.D /2" I.D. x 1/4" I.D /8" I.D. x 1/2" I.D /4" I.D. x 5/8" I.D /4" I.D. x 1/2" I.D /4" I.D. x 3/8" I.D /4" I.D. x 1/4" I.D " I.D. x 1/2" I.D " I.D. x 3/4" I.D /4 x /4 x /4 x /2" I.D. x 3/4" I.D /2" I.D. x 1-1/4" I.D /2" I.D. x 1" I.D " I.D. x 1-1/4" I.D I.D. X 1- I.D " I.D. x 1/2" I.D x 1 TEE I.D. O.D /8 1/ /4" 3/8" /8" 1/2" /2" 5/8" / /4" 7/8" " 1-1/8" /4" 1-3/8" /2" 1-5/8" " 2-1/8" FITTING X MALE ADAPTER I.D. O.D. Pipe /2" 5/8" 1/2" /4" 7/8" 3/4" A B C MAY WE SUGGEST... REDUCING TEE A B C /8" 3/8" 1/4" / /2" 1/2" 3/4" /2" 1/2" 3/8" /4" 3/4" 1/2" /4" 1/2" 3/4" " 1" 3/4" " 1/2" 1/2" / /4 1-1/ /4 1-1/ " 2" 1" WIRE SOLDER TMS PASTE SOLDERING FLUX Formulated especially for copper PART # lb. 50/50 Solder lb. Lead Free Solder 10
13 COPPER FEMALE ADAPTER ID OD Pipe /4" 3/8" 1/4" /8" 1/2" 3/8" /2" 5/8" 1/2" /4" 7/8" 3/4" " 1-1/8" 1" /4" 1-3/8" 1-1/4" /2" 1-5/8" 1-1/2" " 2-1/8" 2" REDUCING FEMALE ADAPTER ID OD Pipe /4" 3/8" 1/2" /8" 1/2" 1/2" / /2" 5/8" 3/4" / /4" 7/8" 1/2" /4" 7/8" 1" " 1-1/8" 3/4" /4" 1-3/8" 1" TUBE CAP ID OD /8 1/ /4" 3/8" /8" 1/2" /2" 5/8" /4" 7/8" " 1-1/8" /4" 1-3/8" /2" 1-5/8" " 2-1/8" / /8 FITTING REDUCER FTG Pipe /4 1/ /8" 1/4" /2" 1/4" / /4" 1/2" " 1/2" " 3/4" / / /4" 1" /2" 1/2" /2" 3/4" /2" 1" /2" 1-1/4" / " 1-1/2" COPPER X FEMALE ELL ID Pipe /2" 1/2" /4" 3/4" /2" 3/4" DROP EAR ELL I.D. Pipe /2" 1/2" /4" 3/4" /2" 3/4" COPPER X MALE ELL ID Pipe /2" 1/2" /4" 3/4" 11
14 COPPER C X C DROP EAR ELL ID OD /2" 5/8" /8 TUBE STRAP I.D / /4" /8" /2" /4" / WIRE HOOKS Tube Size Length /2" 6" /4" 6" UNION ID OD / /8" 1/2" / /2" 5/8" /4" 7/8" " 1-1/8" /4" 1-3/8" /2" 1-5/8" COPPER HANGING STRAP x CROSSOVER FLANGED SINK ELL ID x Pipe FLUSH ADAPTER ID OD Pipe / /8 AIR CHAMBER x FLUSH BUSHINGS, FTG X COPPER FTG Copper /4 1/ / / / /
15 COPPER REDUCING MALE ADAPTER ID OD Pipe /8 1/ / / / / / / / / / / / / /4 MALE ADAPTER I.D. O.D. Pipe / /4" 3/8" 1/4" / / / / / / / MAY WE SUGGEST... SOLDER FLUX Lead-free, will not turn fittings green /2 lb. can COUPLING WITH STOP ID OD / /8 1/ / / / / / / / / / / COUPLING WITHOUT STOP ID OD / / / / / / / / REDUCING ELBOW ID OD /2" 3/8" /4" 1/2" " 1/2" " 3/4" REDUCING 90 ELBOW, LONG RADIUS x 1/4 MARVEL THREAD ADAPTERS
16 COPPER 45 ELBOW I.D. O.D / /4" 3/8" /8" 1/2" /2" 5/8" / /4" 7/8" " 1-1/8" /4" 1-3/8" /2" 1-5/8" " 2-1/8" ELBOW, FTG X COPPER FITTING X 90 ELBOW ID OD / /4" 3/8" /2" 5/8" /4" 7/8" / ELBOW I.D. O.D / /4" 3/8" /8" 1/2" /2" 5/8" / /4" 7/8" " 1-1/8" /4" 1-3/8" /2" 1-5/8" " 2-1/8" ELBOW, LONG RADIUS I.D / / / / /
17 CPVC HOT & COLD FITTINGS COUPLING FEMALE ADAPTER x BRASS TRANSITION TEE MALE ADAPTER A C B REDUCING TEE A B C ELBOW 45 BRASS TRANSITION CAP ELBOW 90 DROP EAR ELBOW SLIP X FPT BRASS TRANSITION REDUCING 90 ELBOW x PIPE STRAP STREET ELBOW TRANSITION TAILPIECE BUSHING x x ADAPTER COUPLING SLIP X SLIP x
18 FLARE FITTINGS SHORT FLARE NUT /8 OD /4 OD /16 OD OD OD /8 OD /8 OD FLARE UNION /8 OD /4 OD /16 OD OD OD /8 OD /8 OD x 1/4 reducing x reducing x 5/8 reducing FLARE ELL /4 OD /16 OD OD OD /8 OD MIP FLARE ELL /4 OD x 1/4 MIP OD x MIP OD x MIP OD x MIP FLARE SERVICE FITTINGS FLARE UNION FLARE TEE /4 OD /16 OD OD OD /8 OD FLARE CAP / /8 MIP FLARE ADAPTER /4 OD x 1/4 MIP OD x MIP OD x MIP OD x MIP x MIP /8 OD x MIP /8 OD x MIP FIP FLARE ADAPTER x FIP x FIP x FIP x FIP /8 x FIP 16
19 FLEXIBLE COUPLINGS FOR CAST IRON AND PVC /4 x 1-1/4 CI/PVC x CI/PVC x 1- CI/PVC x CI/PVC x 2 CI/PVC x CI/PVC x 1- CI/PVC x CI/PVC x 3 CI/PVC/SS x CI/PVC/SS x 2 CI/PVC x CI/PVC x 3 CI/PVC x CI/PVC x 4 CI/PVC/SS x CI/PVC/SS FLEXIBLE COUPLINGS FOR CLAY X CAST IRON OR PVC x 4 Clay x CI/PVC x 4 Clay x CI/PVC QWIK TEES QWIK ELBOWS TOTAL MAINTENANCE SOLUTIONS FLEXIBLE COUPLINGS TRAP DRAIN ADAPTERS FOR CAST IRON/PVC & TUBULAR /4 x 1-1/4 or 1- x 1- tubular x tubular x 1- or 1- x 1-1/4 copper x tubular x 1- or 1-1/2 x 1-1/4 CI/PVC X tubular x 1- or 2 x CI/PVC x tubular DONUT FOR CLAY BELL X CAST IRON OR ABS/PVC SEWER AND DRAIN 4 x 4 Clay Bell x CI (SV) or ABS/PVC S&D ECONO-CAP NO HUB COUPLINGS (IAPMO APPROVED, STANDARD A74) x NO HUB TORQUE WRENCH Toll Free 877/ Toll Free Fax 877/
20 TOTAL MAINTENANCE SOLUTIONS FLEXIBLE COUPLINGS PLASTIC SOCKET TO PLASTIC PIPE CAST IRON AND PLASTIC TO CAST IRON AND PLASTIC A B C CLAY TO CAST IRON OR PLASTIC B C CONCRETE TO CAST IRON OR PLASTIC A B C CONDENSATE PIPE CONNECTORS B C PLASTIC SOCKET TO PLASTIC SOCKET A B C PROFLEX SHIELDED SPECIALTY COUPLINGS FROM FERNCO 3000 SERIES FOR CAST IRON TO PLASTIC, STEEL OR EXTRA-HEAVY CAST IRON A A A B C CI, PL or ST to 1- PL or ST CI, PL or ST to 1- PL or ST CI to 2 PL, ST, or CI CI to 3 PL, ST or XH CI CI to 3 PL, ST or XH CI CI to 4 PL, ST or XH CI CI to 6 PL, ST or XH CI 3001 SERIES FOR CAST IRON, PLASTIC, OR STEEL TO COPPER CI, PL, or ST to 1- Copper or 1-1/4 PL CI, PL or ST to 1- Copper or 1-1/4 PL CI, PL or ST to 2 Copper CI, PL or ST to 3 Copper CI, PL or ST to 3 Copper 3002 SERIES FOR CAST IRON, PLASTIC OR STEEL TO TUBULAR CI, PL or ST to 1- Tubular CI, PL or ST to 1- Tubular Tubular to 1- Tubular 3003 SERIES FOR COPPER TO COPPER Copper to 1- Copper or 1-1/4 PL
21 FLEXIBLE COUPLINGS DRAIN TRAP CONNECTOR/ PIPE SLEEVE SEALS x 1- or 1-1/ x 1- or 1-1/4 QWIK TRAP POW-R WRAP 2 x 48 wrap to repair up to 1 diameter pipe FIX-A-FLANGE
22 TOTAL MAINTENANCE SOLUTIONS GALVANIZED & BLACK IRON FITTINGS TEES 90 REDUCING ELBOWS 90 ELBOWS Size Sch. 40 Galvanized Sch. 40 Black 1/ / / Size Sch. 40 Galvanized Sch. 40 Black x 1/ x 1/ x x x x /4 x /4 x /4 x x x 1-1/ x Size Sch. 40 Galvanized Sch. 40 Black 1/ / / COUPLINGS 90 STREET ELBOWS Size Sch. 40 Galvanized Sch. 40 Black 1/ / / ELBOWS Size Sch. 40 Galvanized Sch. 40 Black 1/ / / Size Sch. 40 Galvanized Sch. 40 Black 1/ / / ALL FITTINGS ARE MALLEABLE IRON AND MEET THE FOLLOWING: ANSI B-16.3 (DIMENSIONS) ANSI B-2.1 (PIPE THREADS) ASTN A-197, ASTM A
23 GALVANIZED & BLACK IRON FITTINGS C A B REDUCING TEES Size (A x B x C) Sch. 40 Galvanized Sch. 40 Black x x x x x x x x x x x x x x x 1 x x 1 x x x /4 x x 1-1/4 1-1/4 x 1-1/4 x 1-1/4 x 1-1/4 x 1 1- x 1- x 1- x 1- x 1 1- x 1- x 1-1/ x 2 x x 2 x x 2 x 1-1/ x 2 x HEX BUSHINGS Size Sch. 40 Galvanized Sch. 40 Black 1/4 x 1/ x 1/ X 1/ x 1/ x 1/ x x 1/ x x x x x /4 x /4 x /4 x x x x x 1-1/ x x x x 1-1/ x x x x x UNIONS Size Sch. 40 Galvanized Sch. 40 Black 1/ / / PLUGS Size Sch. 40 Galvanized Sch. 40 Black 1/ / /
24 GALVANIZED & BLACK IRON FITTINGS REDUCING COUPLINGS Size Sch. 40 Galvanized Sch. 40 Black 1/4 x 1/ x 1/ x 1/ x x 1/ x x x 1/ x x x /4 x /4 x /4 x x x x x 1-1/ x x 1-1/ x MAY WE SUGGEST... HANGER IRON & TAPE /4"x 10 ft. Galvanized hanger iron /4" x 100 ft. Galvanized hanger iron x 10 ft. Plasti-Pro hanger tape x50 ft. Plasti-pro hanger tape CAPS Size Sch. 40 Galvanized CROSSES (BLACK IRON) / Sch. 40 Black 1/ / / BLACK IRON NIPPLE KITS Includes 7 each of close through 6 and metal tray BLACK PIPE x x x x x x x x x x 48 RIGHT & LEFT BLACK COUPLING /4 RIGHT & LEFT BLACK NIPPLE x x x /4 x
25 GALVANIZED & BLACK IRON FITTINGS WELDED STEEL PIPE NIPPLES (BLACK AND GALVANIZED) Size CLOSE / / / WELDED STEEL PIPE NIPPLES (BLACK AND GALVANIZED) Size / / / MAY WE SUGGEST... GALVANIZED STEEL PIPE STRAPS GALVANIZED LONG PIPE NIPPLES /2" Pipe /4" Pipe " Pipe /4" Pipe /2" Pipe " Pipe Pipe Pipe ONE HOLE PIPE STRAPS x x x x x x
26 HOSE BARB RIGID MALE ADAPTER RIGID FEMALE ADAPTER /8 x 1/ /8 x 1/ /16 x 1/ /16 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /4 x /4 x /16 x /4 x x /16 x 1/ x /16 x x x 1/ x x x 1/ x x /8 x /8 x /8 x x x HOSE BARB 90 ELBOW (HOSE X MPT) /16 x 1/ /4 x 1/ /4 x 1/ /16 x 1/ x 1/ x x /8 x MENDER/SPLICER x x / / / / / HOSE BARB ELBOW /4 x 1/ /4 x 1/ x x HOSE BARB TEES / / / ACTUAL PROFILE OF HOSE BARBS 5/16 1/4 3/16 1/8 5/
27 BRASS MALE HOSE THREAD x TOTAL MAINTENANCE SOLUTIONS HOSE FITTINGS BRASS FHT X FIP x x BRASS SWIVEL CONNECTION FHT x FIP FHT x FIP BRASS MIP X FHT x x FIP BRASS MHT X MIP x x ( FIP) X BRASS FHT X MIP x FHT ADAPTER x 3/ PLASTIC HOSE TO PIPE SWIVEL FHT x PVC Pipe FHT x PVC Pipe CAP BRASS MHT X FIP x x FHT x MIP FHT Cap chrome plated (Die cast) FHT Cap brass Y CONNECTION FHT x MHT (2) - cast brass PLASTIC HOSE TO MIP SWIVEL x x RUBBER HOSE WASHERS washers on a clip Individual washers FILTER SCREEN WASHER
28 HOSE FITTINGS GARDEN HOSE NOZZLES Heavy duty grip with insulated handle for hot water up to Adjustable brass tip pistol nozzle GARDEN HOSE REPLACEMENT COUPLINGS AND MENDERS Replacement female hose end. Fits 5/8 and hose Replacement male hose end. Fits 5/8 and hose Hose mender for 5/8 and hose TWIN SHUT-OFF VALVE 2-way hose shut-off Y. Hose impact polymer that s non-corrosive. Not recommended for hot water Same as above in brass Metal pistol grip. Brass stem economy All zinc metalized body. Clip locks any spray pattern. Brass valve stem with adjusting nut. GARDEN HOSES High pressure reinforced vinyl hose for garden use. 5/8 x 50 feet Commercial heavy duty hose. 500 lb bursting pressure. x HOSE COUPLING M x F brass /8 M x F brass M x F brass Fan sweep nozzle World s greatest hose nozzle
29 COUPLING / x TOTAL MAINTENANCE SOLUTIONS INSERT FITTINGS ADAPTER FIP X PLASTIC / PLASTIC TEE ELBOW / x x x x / x ADAPTER MALE X PLASTIC / ELBOW PLASTIC X MALE TEES WITH FEMALE PIPE THREAD ON THE DROP x x x x x x ELBOW PLASTIC X FEMALE x x ADAPTER REDUCING MALE X PLASTIC x x x /4 x
30 MISCELLANEOUS ICEMAKER KITS Ice Maker kit with 25 ft of polyethylene tubing, self piercing needle valve, clamp and fittings Same as with 25 ft of copper tubing STAINLESS STEEL WORM DRIVE CLAMPS Trade Range /4 to 5/ /4 to 7/ /16 to 25/ to 29/32 8 Size /16 to 1-1/ /16 to 1-1/ /16 to /16 to /16 to 2-1/ /16 to /16 to /16 to /16 to /8 to 4-64 PLASTIC TUBING INSERTS /4 insert insert DISHWASHER AND WASHING MACHINE HOSES Washer drain hose. 6 ft. long with step down end for 3/4",7/8" or 1" drain Dishwasher drain hose. 5/8" I.D Washing machine hose mixer. High pressure hose with 12" arms Washing machine hose. 6 ft. High pressure hose with two female ends ' Washing machine hose " S/S washing machine hose " S/S washing machine hose Washing machine box, 2 valve Washing machine box, single cutoff Quatro washing machine box Icemaker box Toll Free 877/ Toll Free Fax 877/
31 PEX TUBING & PIPE PEX BARB COUPLINGS x PEX X MALE SWEAT ADAPTERS x x PEX DROP EAR ELL x FPT COPPER CRIMP ADAPTER PEX X FEMALE SWEAT ADAPTERS x x PEX BARB ELL STAINLESS STEEL CRIMP RING TUBE TALON PEX BARB X MPT ADAPTER x x x PEX BARB TEE x x x x x x x x BALL VALVE x x PEX BARB X FPT ADAPTER x x PEX POLY BARB COUPLING x x HOT/COLD PEX PIPE TUBING ID OD /8 1/ / / /8 29
32 PVC/DWV SANITARY TEES x 2 x x 1-1/2 x x 1-1/2 x x 3 x x 3 x 1-1/ x 4 x x 4 x Sewer/Drain DOUBLE SANITARY TEES x x 3 x 2 x x 4 x 2 x x 4 x 3 x 3 COMBINATION WYE & 1/8 BEND 1/4 BEND LONG SWEEP /4 BENDS Size x 2 x x 3 x x 4 x x 4 x Sewer/Drain WYES x 2 x x 3 x x 3 x x 4 x x 4 x x 4 1/4 BEND STREET DOUBLE WYE x 2 x 1- x
33 1/8 BEND 1/16 BEND Sewer/Drain STREET 1/8 BEND Sewer/Drain 1/16 STREET BENDS Sewer/Drain REDUCER BUSHING x 1-1/ x x x x x 4 MALE ADAPTER /4 x 1- TOTAL MAINTENANCE SOLUTIONS PVC/DWV SLIP CAP COUPLINGS Sewer/Drain FEMALE ADAPTER REDUCER COUPLINGS HUB X HUB x x x x Sewer/Drain THREADED PLUG COUNTER SUNK PLUG
34 PVC/DWV HUB X SJ TRAP ADAPTER x 1-1/ SPIGOT X SJ TRAP ADAPTER x 1-1/ P-TRAP SOLVENT WELD SADDLE TEES x 2 Saddle Tee Kit x 3 Saddle Tee Kit CLEANOUT TEE WITH PLUG PVC-DWV PIPE (FOAMCORE) Length FITTING CLEANOUT ADAPTER WITH PLUG MAY WE SUGGEST... CLOSET FLANGE Hub x Hub x x 3 with knock out TWIN ELL FLUSH CLOSET FLANGE Fits over 3 or inside 4 pipe ADAPTER S/D TO DWV x x 4 URINAL FLANGE 2 Horizontal adjusting urinal flange kit Solvent weld over Solvent weld inside
35 PVC/DWV SOIL PIPE ADAPTERS NO HUB SOIL PIPE ADAPTER x 2, DWV x CI No-Hub , DWV x CI No-Hub , DWV x CI No-Hub , DWV x CI No-Hub CLOSET FLANGES WITH METAL RINGS OFFSET CLOSET FLANGES x 3 Metal ring Plastic over 4 pipe inside 4 hub LOW-HEEL 90 INLET x 3 x x 4 x 2 PVC CONDENSATE TRAP TEST CAPS
36 PVC SCH.40 COUPLING SLIP X SLIP / ELBOW 90 SLIP X SLIP x / ELBOW 90 SLIP X FIP x / ELBOW 45 SLIP X SLIP / MALE ADAPTER SLIP X MIP / REDUCING FEMALE ADAPTER SLIP X FIP x x REDUCING MALE ADAPTER SLIP X MIP x x x FEMALE ADAPTER SLIP X FIP /
37 PVC SCH. 40 TEE SLIP / REDUCING TEE A B C BUSHING SLIP X FPT x x x /4 x 1/ /4 x /4 x x x x x 1-1/ x x x x 1-1/ x x 2 BUSHING SLIP X SLIP x x x /4 x /4 x /4 x x x x x 1-1/ x x x x 1-1/ x x x x x x x x x 3 BUSHING MPT X FPT x x x /4 x x 1-1/ x 1- CAP SLIP /
38 PVC SCH shown shown PVC SCHEDULE 80 FITTINGS Male adapter Male adapter Male adapter Thread union Thread union Thread union /4 Thread union Thread union Thread union Slip union Slip union Slip union /4 Slip union Slip union Slip union Slip union PVC SCH. 40 PRESSURE PIPE (NOT SHOWN) /
39 ACETAL TEE / x x x x x x ACETAL ELBOW / x ACETAL COUPLING / x 1/ x 1/ x x ACETAL FEMALE ADAPTER x x x ACETAL MALE ADAPTER /4 x x 3/ x x x x x TOTAL MAINTENANCE SOLUTIONS QEST FITTINGS FIP DROP EAR ELL x IN-LINE GLOBE VALVE HOSE BIBB ANGLE STOP FPT x QT ANGLE STOP QT x QT x x MPT QT 37
40 QEST FITTINGS TUBE X MIP ELL /4 x 1/ /4 x x x x x NUT/RING/CONE Thread Size For Nom Tube Size / NUTS / RINGS / CONES /
41 REPAIR CLAMPS AND COUPLINGS * Also fits 1/2" nominal copper tubing (5/8" OD) Repair clamps available from 3/8" IP to 1/2" IP STAINLESS STEEL REPAIR CLAMPS /8" x 3" one bolt * /8" x 6" two bolt * /2" x 3" one bolt /2" x 6" two bolt /4" x 3" one bolt /4" x 6" two bolt " x 3" one bolt " x 6" two bolt /4" x 3" one bolt /4" x 6" two bolt /2" x 3" one bolt /2" x 6" two bolt x 3 one bolt " x 6" two bolt x 3 one bolt x x 3 one bolt x 6 two bolt " x 6" two bolt x 3 one bolt x 6 two bolt HINGED TYPE REPAIR CLAMPS /2" IP repair clamp /4" IP repair clamp " IP repair clamp /4" repair clamp /2" repair clamp " IP repair clamp GALVANIZED MALLEABLE IRON COMPRESSION COUPLINGS /8" I.P. Compression-Regular /2" I.P. Compression-Regular /2" I.P. Compression-Long /4" I.P. Compression-Regular /4" I.P. Compression-Long " I.P. Compression-Regular " I.P. Compression-Long /4" I.P. Compression-Regular /4" I.P. Compression-Long /2" I.P. Compression-Regular I.P Compression Long " I.P. Compression-Long I.P. Compression Short I.P. Compression Short /2" I.P. Compression Elbow /4" I.P. Compression Elbow " I.P. Compression Elbow " I.P. Compression Elbow /8" I.P. Compression Tee /2" I.P. Compression Tee /4" I.P. Compression Tee " I.P. Compression Tee " I.P. Compression Tee /2" I.P. Comp. x 1/2" I.P. Comp. x 1/2" FIP /4" I.P. Comp. x 3/4" I.P. Comp. x 3/4" FIP /4" I.P. Comp. x 3/4" I.P. Comp. x 1/2" FIP SADDLE CLAMPS IP IP 39
42 REPAIR CLAMPS AND COUPLINGS BRASS COUPLINGS Pipe Size Copper Size Length /8" 1/2" 2-3/4" /8" 1/2" 4-5/8" /2" 3/4" 2-7/8" /2" 3/4" 4-13/16" short /4" 1" 4-7/8" /4 short " 1-1/4" 4-15/16" /4 1- short /4 1- long short long long long (below) and shown PVC & CPVC COMPRESSION COUPLINGS /8" I.P. Compression Coupling /2" I.P. Compression Coupling /4" I.P. Compression Coupling " I.P. Compression Coupling /4" I.P. Compression Coupling /2" I.P. Compression Coupling " I.P. Compression Coupling I.P. Compression Coupling " I.P. Compression Coupling " I.P. Compression Coupling /2" CPVC Compression Coupling /4" CPVC Compression Coupling BRASS COUPLING TEES IP x compression copper x IP threads IP x copper x IP threads PVC-DWV REPAIR COUPLINGS PVC IN-LINE REPAIR COUPLING / SNAP-EASE ACCESS PANEL x x 14 PVC TEES IP IP IP /4 IP IP IP 40 Toll Free 877/ Toll Free Fax 877/
43 TERMS TOTAL MAINTENANCE SOLUTIONS AND CONDITIONS IT S EASY TO ORDER Choose the way that s best for you. Phone, FAX, mail, EDI, or place it with your local sales representative. If you don t already have an account, call us for a credit application. Mail orders to your local branch: Taylors, SC PO Box 68, Taylors, SC Orlando, FL PO Box , Orlando, FL Houston, TX 4155 W. Bellfort, Houston, TX Contact us via at: customerservice@tmssouth.com OUR TERMS 1% discount 10 days from date of invoice. Net 30 days. Invoices not paid according to terms are subject to a monthly service charge of 1-1/2% per month. (Annual rate 18%) MINIMUM ORDER Our minimum order is $ Orders under $25.00 are subject to a $5.00 handling charge. QUOTATIONS Write, FAX, phone or us for a quotation on any item, even those not currently in our catalog. Quotations are good for 45 days. Pricing is in effect at the time of shipment. Our FAX numbers are: Taylors, SC 864/ or toll-free 888/ Orlando, FL 407/ or toll-free 800/ Houston, TX 713/ or toll-free 800/ RETURNS Your satisfaction is our desire. You may return merchandise by your sales representative. If this is not convenient we ask that you call for shipping instructions before returning merchandise to us. No returns without an RGA. Non-stock & special order returns are subject to handling and restocking charges. CLAIMS, DEFECTS AND DAMAGES We ask that you notify us of shortages or damaged/defective merchandise within 10 days of delivery. FREIGHT POLICY Freight is FOB destination on orders over $ Under $ freight is pre-paid and added to the invoice. Exceptions include bulk items such as china, drinking fountains and sewer machines. Other items may be included. SAME DAY SHIPPING Same day shipping is available on all orders placed by 3 pm EST. Next day and quick shipping are available at customer s cost. SALES TAX TMS is required to charge applicable state and local tax on every item for which a sales tax exemption certification has not been provided. When ordering, please indicate which items are tax exempt. SPECIAL SERVICES If you have a special shipping or billing request, please let us know. We will do our best to accommodate your particular needs. LIMITED WARRANTY Neither we nor the manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use or inability to use an item sold by us, but our only obligation in lieu of all warranties expressed or implied, is to replace any item proven to be defective. Before using, the user must determine the suitability of the product for its intended use, and the user assumes all risk in connection therewith. WARRANTY DISCLAIMER TMS has made a diligent effort to illustrate and describe the products accurately; however, such illustrations and descriptions are for the sole purpose of identification, and do not express or imply a warranty that the products are merchantable, or fit for a particular purpose, or that the products will conform to the illustrations or depictions. No warranty or affirmation of fact, express or implied, other than that as set forth in the limited warranty statement above is made or authorized by TMS. EDI (ELECTRONIC DATA INTERCHANGE) If you would like to do business electronically, please let us know. We can receive purchase orders, and send acknowledgements and invoices electronically. We can also provide bar coded movement documents. Please call us to get us test transmissions. MATERIAL SAFETY DATA SHEETS (MSDS) Safety data sheets for all chemicals and related products sold by TMS are available upon request. SATISFACTION GUARANTEED We re not happy until you re happy! If you re not, contact us immediately. Any reproduction in whole or part, or any unauthorized use without the express permission of TMS is prohibited and will constitute a violation of the copyright laws of the United States. TMS South, September 2008
Bid # Plumbing Supplies RESULTS
BOARD APPROVED Bid # 15-4 - Plumbing Supplies Page 1 of 16 Grant Plumbing North Brunswick NJ PVC PIPE, SCHEDULE 40 1 1-1/4" PVC Pipe, SCH 40, 20' feet 60 $0.598 $35.88 2 1-1/2" PVC Pipe, SCH 40, 20' feet
More informationMIDDLESEX COUNTY COLLEGE EDISON, NJ LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS
MIDDLESEX COUNTY COLLEGE EDISON, NJ 08818 LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS The College is soliciting bids to award a Local Supplier Blanket Order agreement for the purchase of supplies for the
More informationABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS.
ABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS www.bow-group.com dimension item Ctn Skid list price dimension item Ctn Skid list price SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationPVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
More informationJones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings
SECTION - FITTINGS & VALVES Brass Compression Fittings... 131-132 Chrome Plated Compression Fittings... 133 45 Flare Tube Fittings... 134-135 Space Heater & Gas Range Fittings... 136 Yellow Brass Pipe
More informationABS-C0219 FEB SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS.
ABS-C0219 FEB. 2019 SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS www.bow-group.com DIMENSION ITEM CTN SKID LIST PRICE DIMENSION ITEM CTN SKID LIST PRICE SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationROUGH PLUMBING. premium industrial products
ROUGH PLUMBING premium industrial products PREMIUM QUALITY PLUMBING PRODUCTS AMRAM AFFILIATE BRANDS For years, Cambridge Resources has been a primary source of premium quality cable management, hose clamps,
More informationAnti Siphon Ballcock RP Anti-Siphon Ballcock
UR PS1115 Effective November 1, 2015 (SUPERCEDES PS0514 ) The issuance of this price list is not an offer to sell the goods listed herein at the prices stated. Anti Siphon Ballcock 109-603RP Anti-Siphon
More informationSUPERSEDES ABS-C0811/AUG.
ABS-C0612/R JUNE 2012 SUPERSEDES ABS-C0811/AUG. 2011 SANITARY TEE REDUCING TEE TEE - Left Side Inlet 600007 1 1/4" 0 62852 60000 5 50 4,800 15.41 600015 1 1/2" 0 62852 60001 2 90 2,880 8.27 600023 2"
More informationDiscount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC. PVC Drain - Waste Vent Fittings. Includes: DWV - PVC - through 8 HVAC.
Discount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC PVC Drain - Waste Vent Fittings Includes: DWV - PVC - through 8 HVAC s Effective: March 14, 2011 1 H x FPT H x MPT SP x MPT SP x SJ w/plastic Nut &
More informationSCHEDULE 80 PVC PRESSURE FITTINGS L80P EFFECTIVE JULY 1, 2017 REVISED PRODUCTS PRICE LIST INCLUDES: SCHEDULE 80 PVC 1/4 TO 12
PRICE GROUP DESCRIPTION 02 SCH 80 PVC through 8 92 SCH 80 PVC 10" AND LARGER VB GASKET for FLANGE DISCOUNT MULTIPLIER PRODUCTS SCHEDULE 80 PVC PRESSURE FITTINGS INCLUDES: SCHEDULE 80 PVC 1/4 TO 12 L80P
More informationABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT ABS DWV FITTINGS.
ABS-0918 SUPERSEDES ABS-0318 ASTM D2661 R/SEPT. 2018 ABS DWV FITTINGS www.bow-group.com COUPLING 1 1/4" 601112 125 9,000 5.63 1 1/2" 601120 125 9,000 3.48 2" 601138 100 4,800 4.65 3" 601146 45 1,440 13.07
More informationABS DWV FITTINGS MARCH 1, 2017
LIST U10-0317-IP ABS DWV FITTINGS MARCH 1, 2017 SUPERSEDES U10-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed price list. Please visit our website
More informationABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661
ABS DWV FITTINGS ABS-1116 NOVEMBER 2016 SUPERCEDES ABS-1215 ASTM D2661 COUPLING 1 1/4" 601112 125 9,000 3.36 1 1/2" 601120 125 9,000 2.25 2" 601138 100 4,800 3.03 3" 601146 45 1,440 8.49 4" 601153 25 800
More informationSchedule 80 - CPVC Pressure Fittings
Discount Codes 03 Schedule 80 CPVC Schedule 80 - CPVC Pressure Fittings List Prices L15-80C Effective: March 26, 2015 Revised 9.22.2016 2 Schedule 80 - CPVC Products Catalog www.lascofittings.com Pricing
More informationDWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS PRICE LIST DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE SEPTEMBER 18, 2017 KEY:...ub
More informationTable of Contents. SeaTechInc.com
Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick
More informationEverTUFF CPVC CTS Fittings, Valves, Pipe & Cement
CTS CPVC uct EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement PRODUCT Contact Spears for any Information not found. Page 1 Spears Manufacturing Company
More informationCompression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
More informationPVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationPRICE EACH PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017
LIST U19-0317-IP PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017 SUPERSEDES U19-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed
More informationDWV - PVC. PVC Drain, Waste & Vent Fittings. Includes: DWV - PVC - through 8 HVAC. List Prices. Effective: February 15, 2016
Discount Codes 07 DWV-PVC through 8 22 VAC DWV - PVC PVC Drain, Waste & Vent Fittings Includes: DWV - PVC - through 8 VAC s Effective: February 15, 2016 Revised 2/29/2016 x FPT x MPT SP x MPT SP x SJ w/plastic
More informationCATALOGUE Valves ~ Faucets ~ Specialties ~ Fittings & Nipples
CATALOGUE 2015 Valves ~ Faucets ~ Specialties ~ Fittings & Nipples CATALOGUE SECTIONS Click to go to section Pages 1-1 to 1-16 Pages 2-1 to 2-10 Pages 3-1 to 3-30 Pages 4-1 to 4-28 Part Number Numerical
More informationDWV PVC DWV Drain Waste Vent Fittings
STANDARDS & SPECIFICATIONS Standards provide greater assurance of product performance and consistency, and are available to assist design engineers in system specification. The most frequently referenced
More informationHVAC Products 2016 EDITION NCI CANADA INC.
HVAC Products 2016 EDITION NCI CANADA INC. YOUR SINGLE SOURCE SOLUTION NCI Canada Inc. is a Canadian National master distributor of high quality valves, fittings, pipes and related products serving residential,
More informationCNC DISTRIBUTION CNC955
Bath and Shower Components CNC930 C.P. Push Pull Diverter 25 CNC955 C.P. Positive Shut Off 25 CNC997 C.P. Inline Vacuum Breaker 25 CNC3580 Brass Twin Ell 25 CNC3585 Bent Bathcock Couplings 25 CNC3581 Drop
More informationSchedule 80 - CPVC Pressure Fittings
Discount Codes 03 Schedule 80 CPVC Schedule 80 - CPVC Pressure Fittings List Prices Effective: August 25, 2012 Revised September 2014 2 Schedule 80 - CPVC Products Catalog www.lascofittings.com Pricing
More informationABS DWV FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
ABS DWV FITTINGS FOR PLUMBING AND MECANICAL APPLICATIONS Job Name Contractor Job Location Wholesaler Engineer Streamline Rep Product Description: Streamline ABS DWV ittings for use in applications including
More informationQuick- Connect. Quick-Connect Plumbing Products Canadian Catalogue and Price List. Effective April 27, Watts. c a
Quick- Connect Quick-Connect Plumbing Products Canadian Catalogue and Price List Effective April 27, 2015 Watts. c a Sizing Matrix Example: 3575-10 = Series 35, Type 75, 1 2" CTS 3 8 CTS = 08 1 4 OD =
More informationTABLE OF CONTENTS. BALL VALVE Full port Standard port...5 Gas...5 Pex...6 Long bonnet...8 T-handle...5 Balancing valve...13
TABLE OF CONTENTS BALL VALVE Full port...4-5 Standard port...5 Gas...5 Pex...6 Long bonnet...8 T-handle...5 Balancing valve...13 STOP VALVE Straight stop...8 Angle stop...8 Long bonnet...8 Stop & Waste...7
More informationNo-Hub Couplings Drainage Drains Cleanout Plugs Cover Plates
Flexible Couplings Transitions all types of DWV plastic, copper, steel, cast iron and clay pipe. 300 series stainless steel clamps Flexibility - Sleeve is manufactured of molded natural and synthetic rubber
More informationABS DWV FITTINGS APRIL 1, 2013
LIST C10-11-111 ABS DWV FITTINGS APRIL 1, 2013 SUPERSEDES C10-11-110 (JUNE 1, 2012) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for
More informationABS DWV FITTINGS JULY 1, 2011
LIST C10-11-109 JULY 1, 2011 SUPERSEDES C10-11-108 (APRIL 1, 2011) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for up-to-date information.
More informationEVERCONNECT TM. Table of Contents. No-Hub Pipe. Flexible. 7 Couplings. Pipe Caps. Heavy Weight. Test Plugs. Couplings. Shielded Transition
Table of Contents No-Hub Pipe Couplings Heavy Weight Couplings Shielded Transition Couplings 3 4 4 Flexible Pipe Caps Test Plugs Drain/Trap & Tubular Connectors 7 7 8 EVERCONNECT TM Flexible & Reducing
More information2016 New Product Catalog. Brass Fittings. & Accessories
2016 New Product Catalog Brass Fittings & Accessories Blank Page Inside Front Cover Table of Contents 04-07 Pipe Fittings & Nipples 08-11 Compression Fittings 12-15 Flare Fittings 16-17 Garden Hose Fittings
More informationPVC Couplings. Brass Couplings BRASS COMPRESSION COUPLING 3 -LENGTH PVC COMPRESSION COUPLING BRASS COMPRESSION COUPLING 5 -LENGTH
& FITT Brass Couplings BRASS COMPRESSION COUPL 3 -LENGTH 46331 3/8 1/2 12 120 5.80 46332 1/2 3/4 12 120 7.38 46333 3/4 1 6 72 10.52 46334 1 1 1/4 6 60 13.44 46335 1 1/4 1 1/2 4 48 18.00 46336 1 1/2 4 36
More information2010 PRODUCT CATALOG QUALITY AND COMMITMENT TO TECHNOLOGY AND SERVICE SINCE 1954
R 2010 PRODUCT CATALOG QUALITY AND COMMITMENT TO TECHNOLOGY AND SERVICE SINCE 1954 R The Isolator Uni-Flange Ball Valve FullPortForgedBrassBallValves Forged Ball w/ Bonus Wing Style T Handle, Nuts & Bolts
More informationCompression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
More informationPrice List. Quick-Connect Plumbing Products. Effective October 30, Watts.com QUICK-CONNECT Catalog and Price List
2017 QUICK-CONNECT Catalog and Price List Price List Quick-Connect Plumbing Products Effective October 30, 2017 All prices supersede previous issues, are temporary and subject to change without notice.
More informationEasy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
More informationGENE RICH SPECIALTIES
All s Final - No Returns Allowed Attn: Plumbing Specialties Buyers Limited Time for Super Savings on Select Items: Faucets and Supplies Compression Tees and Couplings Dielectric Unions Red, Yellow and
More informationPL-0912-PLSPEC Plumbing Specialities
PL-0912-PLSPEC Plumbing Specialities s Effective September 1, 2012 62FCLV CAST BRASS CLOSET FLANGE - CHROME CLEVELAND CODE CLOSET FLANGE 13.83 1 50 CF-100 4" FOR LEAD 14.13 1 50 CF-200 4" X 3" DWV FOR
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationMATERIAL SPECIFICATIONS AND BID PROPOSAL SHEET
CATEGORY 1: STEEL COUPLINGS 0 ¾" Steel Couplings (Smith-Blair #411-0501-003) 20 1" Steel Couplings (Smith-Blair #411-013201-003) 20 1¼" Steel Couplings (Smith-Blair #411-016601-003) 20 2" Steel Couplings
More informationThe BEST Plumbing Specialties. One Source. B 1 Quality, Durability, reliability
The BEST Plumbing Specialties. One Source. B 1 BraSS tubular Quality, Durability, reliability Since 1964 LYNCAR has manufactured and distributed high quality plumbing specialty items. In keeping with that
More informationCOPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS
COPPER FITTINGS FOR PLUMBING AND MECHANICAL APPLICATIONS Job Name Job Location Engineer Contractor Wholesaler Streamline Rep Product Description: Streamline Wrot Copper Pressure and DWV fittings for use
More information2348 Linden Blvd Brooklyn, NY Tel: (718) Fax: (718) PVC DWV FITTINGS
2348 Linden Blvd Brooklyn, NY 11208 Tel: (718) 566-1000 Fax: (718) 566-1799 Email: sales@alroproducts.com www.alroproducts.com PVC DWV FITTINGS 2348 Linden Blvd Brooklyn, NY 11208 Tel: (718) 566-1000 Fax:
More informationCPVC HOT & COLD PLUMBING SYSTEM PRICE LIST
CPVC HOT & COLD PLUMBING SYSTEM PRICE LIST With effect from 1st June, 2015 SDR-11 (3 Mtr. Length) (Rate per mtr.) 15 ½ M011110301 100 75.00 20 ¾ M011110302 50 110.00 25 1 M011110303 30 174.00 32 1¼ M011110304
More informationPROJECT CATALOG 01 17
PROJECT CATALOG 01 17 FINISH AND PRICING GROUP CHART Standard Finishes Usually ships in 3-10 days Price Group I Price Group II Polished Chrome 07 Satin Nickel 12 Oil Rubbed Bronze Special Finishes Price
More information(718)
1 of 19 PVCDWV 090418 P9599 P9512 P9513 P9555 P9514 P10435 P11483 P9805 P10072 P10831 P10797 P10554 Coupling (H H) (718) 566-1000 Female Adapter (FPT H) Reducing Female Adapter(HxFPT) Product(s) Part Number
More informationTBM Series 3-Way Ball Valve
www.simtechusa.com TBM Series 3-Way Ball Valve Operating, Installation, & Maintenance Manual Corrosion Resistant Fluid and Air Handling Systems. Dated 06-26-13 TBM Series Ball Valves SIMTECHRECOMMENDSREADINGTHEFOLLOWINGINFORMATIONPRIORTOINSTALLINGANDUSING
More informationDual Phase Extraction Inlet. Patent No Installation Manual. P/N Rev
Patent No. 6520259 Installation Manual P/N 95232 Rev 6-16-11 Table of Contents ing Extraction Inlets track changing water levels to maintain optimum performance 1.Component Identification Page 1 2. How
More informationCNC DISTRIBUTION. ITEM NO Description Quantity
Valves CNC DISTRIBUTION Brass Ball Valves ITEM NO IPS Ball Valve *600# PSI WOG 150 PSI WSP * Heavy Pattern Forged Brass Construction *Full Port For Maximum Flow *Teflon Seats * Teflon Stem Packing * AGA,
More informationCPVC CTS Fittings, Valves & Pipe COPPER-TUBE-SIZE
CPVC CTS Fittings, Valves & Pipe COPPER-TUBE-SIZE Visit our web site: www.spearsmfg.com PRICE SCHEDULE CTS-1-1009 Effective October 26, 2009 Supersedes CTS-1-0308A TEE Socket x Socket x Socket 4101-005
More informationThrifty Supply Company Wholesale Plumbing & Heating Supplies --
WATER SYSTEMS TANKS & FITTINGS 10-01-18 1-19 PRO-SOURCE DIAPHRAGM TANKS Draw-Down (GAL) Model List Inlet Width x Height 20/40# 30/50# 40/60# PSP19T-T02 - (=19gal) $ 295.00 1" Fip 16" x 27.5" 6.9 5.8 5.0
More informationPLUMBING VALVES TOTAL MAINTENANCE SOLUTIONS
BRONZE STOP VALVES Domestic Import 40300283 1/4 Iron pipe thread 57842032 3/8 Iron pipe thread 40300284 1/2 Iron pipe thread 57021034 40300285 3/4 Iron pipe thread 57021036 BR ONZE GATE VALVES 125 psi.
More informationLUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
More informationTa b l e o f C o n t e n t s
Ta b l e o f C o n t e n t s 3-4 Technical Information 5 Tubing for 24 Series, 35 Series, and 45 Series 6-7 24 Series Fittings 8-13 35 Series Fittings and Valves 14 35 Series Quick Connect Manifold, Configuration
More informationCouplings: Flex, ProSeal & No-Hub Drains Test Caps & Plugs Cleanout Plugs Cover Plates
Flexible Couplings for DWV & Non-Pressure Transitions Transitions all types of DWV plastic, and cast iron. 300 series stainless steel clamps Flexibility - Sleeve is manufactured of molded natural and synthetic
More informationCARBON STEEL PIPE - BUTTWELD
010-1 CARBON STEEL PIPE - BUTTWELD WEIGHT BLACK GALVANIZED FUSION BOND SIZE LBS/FT T & C P.E. T & C P.E. 1/8" 0.24 8.00 6.09 16.40 14.28 1/4" 0.42 9.61 8.25 15.27 12.91 3/8" 0.57 10.98 9.52 16.91 14.39
More informationParts Manual V100G Vacuum Machine Part #E (SERIAL #1G G )
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual V100G Vacuum
More informationFlexible Couplings & Saddles
Revised 6/01 Flexible Sewer couplings are the result of many years of experience with sewer pipe connections. Today's couplings are made of specially formulated elastomeric PVC with high tear and shear
More informationTable of Contents Multiplex Company, Inc. Terms and Conditions Affecting Customer Purchase Orders, Shipments of Materials, and Ordering Parts... How t
Illustrated Fittings and Hardware Catalog Fountain Beverage Dispensing Equipment 250 Old Ballwin Road w St. Louis, Missouri 6302-4800 Tel: 636.256.7777 w Fax: 636.527.433 info@multiplex-beverage.com w
More informationInstallation and Maintenance Instructions
Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from
More informationModel 6518FR. NOTE TO INSTALLER: Please leave this information with the Maintenance Department. LIMITED WARRANTY
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com Model 6518FR No. 2077777(21)
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationD. S. HULL COMPANY, INC
PVC Slip x Female Pipe Adapters Mfg Slip Female Pipe 235736 435-005 1/2 1/2 $0.81 235747 435-007 3/4 3/4 $1.03 235758 435-010 1 1 $1.18 235769 435-012 1-1/4 1-1/4 $1.84 235770 435-015 1-1/2 1-1/2 $2.11
More informationSWING JOINT & HEAVY TURF
PRICE GROUP DESCRIPTION 11 SWING JOINT 08 HEAVY TURF DISCOUNT MULTIPLIER PRODUCTS SWING JOINT & HEAVY TURF IRRIGATION FITTINGS INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES LSJHT EFFECTIVE JULY
More informationBeverage Master Parts List. Part 8 of 13: Fittings. Issued: March 9, Toll Free:
Beverage Master Parts List Issued: March 9, 2012 Part 8 of 13: Fittings Our most popular fittings are shown in this section, but many other fittings are available. If you don t find what you are looking
More informationIRRIGATION FITTINGS PRODUCTS PRICE LIST SWING JOINT & HEAVY TURF INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES PRICE GROUP DISCOUNT MULTIPLIER
PRICE GROUP DESCRIPTION 11 SWING JOINT 08 HEAVY TURF DISCOUNT MULTIPLIER PRODUCTS SWING JOINT & HEAVY TURF IRRIGATION FITTINGS INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES LASCO SWING JOINTS First
More informationPLUMBING WHOLESALE CATALOG
PLUMBING WHOLESALE CATALOG PLUMBING WHOLESALE CATALOG CONTENTS Tube & Pipe Copper Tube............................8-9 Plastic-Coated Copper Tube.................10 Level Wound Copper Tube..................11
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #101016 EFFECTIVE: OCTOBER 1, 2016 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027
More informationEffective Date: January 2017 Void After: January Product: ABS-DWV Pipe and Fittings File No. 1909
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationPRICE LIST
Oct. 2013 201 East Street South, PO Box 278, Vernon Center, MN 56090 U.S.A. 2013-2014 PRICE LIST Toll Free: (800) 338-5756 Phone: (507) 549-3434 Fax: (507) 549-3017 E-mail: info@visionsinc.us Website:
More informationSHARKBITE INSTALLATION GUIDE
SHARKBITE INSTALLATION GUIDE THE TOTAL PLUMBING SOLUTION CUT: Cut the pipe square removing rough edges and debris. Mark the pipe to the correct insertion depth. PUSH: Push pipe and fitting together up
More informationInstallation Instructions
1 Installation Instructions SharkBite Connection System The SharkBite System The SharkBite connection system uses an advanced push-fit design that works in two stages. When the tube is inserted into the
More informationPG-35AV-CH Coiled Hose and Spray Valve. PG-8WSAV-08 Lighweight Aluminum Spray Unit
A Pet-Care Pre-Rinse Plumbing Units Products RINSE UNITS T&S Quality Pet-Care Plumbing Products Wash and Rinse Products Replacement Parts Model # Description EB-10K Repair Kit 013539-45 Replacement Hose
More informationOperating and Maintenance Instructions
1500 Tube Leak Test Gun - Vacuum Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com Table Of Contents Introduction...
More informationBall Valves. Full Port Ball Valves - Compression w/ Drain Cap - Forged Brass. Full Port Mini Ball Valve - Forged Brass 05/06/15
05/06/15 G8 Full Port - Compression w/ Drain Cap - Forged Brass Rated for cold water, oil & gas Blow-out proof stem Temperature Range: -30 to 150C (-22 to 302F) Working Pressure: 600 psi Blue handle Lead-Free
More information6A-1773 Q ISO-2944
6A-1773 Q1-2801 ISO-2944 Lowery Well Heads, Inc. Quality is #1 We are happy to announce that as of 9-11-15 we are now API Q1 and ISO 9001 certified. Lowery Well Heads, Inc. is committed to its customer
More informationPLUMBING.
CVC-CTS ipe and Fittings... 181 ylon Fittings...181-182 Oatey roducts...184 VC Condensate ipe... 176 VC DWV Fittings...180 VC rimer and Cement...183 VC Schedule 40 ressure Fittings...176-179 Supports...180
More information201 East Street South, PO Box 278, Vernon Center, MN U.S.A PRICE LIST
Jan 2016 201 East Street South, PO Box 278, Vernon Center, MN 56090 U.S.A. 2016 PRICE LIST Toll Free: (800) 338-5756 Phone: (507) 549-3434 Fax: (507) 549-3017 E-mail: info@visionsinc.us Website: www.visionsinc.us
More informationPage Concealed Flush Valve (1976 on)
8T _ Series Concealed Flush Valve (16 on) 2 10 14 11 15 1 8 OSC. HANDLE 16 1 10 14 1 12 15 8 4 1 /8" PUSH BUTTON 16 5/8" PUSH BUTTON 5 " PUSH PLATE OUTLETS See Page 40 18 21 2 22 20 6 FOOT PEDAL REPAIR
More informationCUSTOMIZE MORE AND MORE WAYS TO ABC PLUMBING FREE CUSTOMIZATION! ABC PLUMBING SEE BACK FOR DETAILS.
APRIL / MAY / JUNE 2017 MORE AND MORE WAYS TO CUSTOMIZE ABC PLUMBING ABC PLUMBING FREE CUSTOMIZATION! SEE BACK FOR DETAILS. AX Carbide Teeth Sawzall Blades Fang Tip for faster plunging Nail guard rips
More informationSHARKBITE INSTALLATION GUIDE
SHARKBITE INSTALLATION GUIDE THE TOTAL PLUMBING SOLUTION CUT: Cut the pipe square removing rough edges and debris. Mark the pipe to the correct insertion depth. PUSH: Push pipe and fitting together up
More informationTaps, Valves & Components. Section 1
Taps, Valves & Components Section 1 taps, valves & components index Index 1 SECTION PAGE sink taps 1.1-1.4 sink taps & spares 1.5 basin taps 1.6 general purpose taps & valves 1.7 flexible connectors, angle
More informationUniversal Sales. Catalog ~ Price list Effective: Booth Street Junction City, OR
Universal Sales Catalog ~ Price list Effective: 3-1-2019 UNIVERSAL SALES 92311 Booth Street Junction City, OR 97448 www.universalsales.biz Phone : 541-998-9999 Fax : 541-998-9998 Toll Free Fax : 888-998-7998
More informationPIPE OUTSIDE DIAMETER GUIDE
June 7, 2018-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE &
More informationDEMA Pro-Fill II Sink Dispenser
DEMA Pro-Fill II Sink Dispenser MODELS PF652GAP, PF652AG, PF652GAP-2M, & PF652AG-2M Overview The PRO-FILL II Sink Dispenser mixes water with cleaning chemicals and dispenses these solutions. This unit
More informationDEMA Pro-Fill I Sink Dispenser
DEMA Pro-Fill I Sink Dispenser MODELS PF651GAP, PF651AG, PF651GAP-1M, & PF651AG-1M Overview The PRO-FILL I Sink Dispenser mixes water with a cleaning chemical and dispenses the solution into holding containers
More informationcatalog C-NPS-1014 NIBCO Press System
catalog C-NPS-1014 ahead of the flow NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
More informationFlexible One-Piece Water Supplies
47 Flexible One-Piece Water Supplies The World s est Water Connectors. y combining our trusted brass supply stops with our dependable raided and Vinyl flexible connectors, rasscraft has created an easy-to-install,
More informationTECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER TECHNICAL ASSISTANCE FAX:
ACORN SAFETY P.O. BOX CITY OF INDUSTRY, CA -0 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS EYEWASH / FACEWASH Models S00 / S00 / S00 / S00-CS-SSE /
More informationFOR TECHNICAL ASSISTANCE
ACORN ENGINEERING COMPANY P.O. BOX 3527 CITY OF INDUSTRY, CA 91744 UNITED STATES OF AMERICA WWW.ACORNENG.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS SV16 TEMPERATURE/PRESSURE BALANCING MIXING
More informationCATALOG. USMetrixQC is a Quick Connect Manifold system for warm and cold running water, and central heating systems. USMetrix QC
CATALOG USMetrixQC is a Quick Connect Manifold system for warm and cold running water, and central heating systems. Connector Body O-Ring Collet (Patent Pending Design) EASY AND QUICK INSTALATION Connector
More informationTERMS OF USE TERMS AND CONDITIONS. Plumbing and Heating Products (PL-WR)
TERMS OF USE 1. Watts pricing and product data is subject to change without notice and such changes supersede all previous versions. 2. Watts data is to be used as provided. Watts is not responsible for
More informationWATER SUPPLIES. Solutions delivered Better engineering, better selection, better results
WATER SUPPLIES Solutions delivered Better engineering, better selection, better results Supply Stops Speedi Plumb PLUS Speedi Plumb One-Piece Supplies Supply Kits Risers Connectors Fittings Component Parts
More informationGEO-ENTERPRISES, INC.
GEO-ENTERPRISES, INC. Oklahoma Office 2640 N Highway 167 Catoosa, OK 74015 Ph: (918) 379-0193 Fax: (918) 379-0471 Missouri Office 1919 N Maple St Buffalo, MO 65622 Ph: (417) 345-7400 Fax: (417) 345-4255
More informationBRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING
BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE
More information