Page Concealed Flush Valve (1976 on)

Transcription

1 8T _ Series Concealed Flush Valve (16 on) OSC. HANDLE /8" PUSH BUTTON 16 5/8" PUSH BUTTON 5 " PUSH PLATE OUTLETS See Page FOOT PEDAL REPAIR KIT RETRO-FIT KIT TO MAKE PRE-12 VALVES NON-HOLD OPEN 1 CHECK VALVE & BALL PRE-18 VALVES OPTIONAL FILTER SCREEN A 4 FITS INTO A 6 5 1

2 8 8T _ Series Concealed Flush Valve (16 on) ITEM # PART # DESCRIPTION 6600 Universal Teck Washers & O Rings Repair Kit (See page for parts breakdown) 6601 Universal Teck Parts,Washers & O Rings Repair Kit (See page 4 for parts breakdown) 1 0 Handle Control Unit complete with 5/8" push button and flange Handle Control Unit complete less handle and flange (Not useable with old style " OD flanges) 20 Standard Oscillating Handle, 2-/8" OD Flange, Roll Pin and Spring Kit 1 of each (184 on) * Optional Oscillating Handle, " OD Flange, Roll Pin and Spring Kit (16-8) Order as separate parts 4 22 Standard 1-/8" Push Button, 2-/8" OD Flange, Roll Pin and Spring Kit 1 of each (184 on) 022 Optional 1-/8" Push Button, " OD Flange, Roll Pin and Spring Kit (16-8) 5 21 Standard " Push Plate, 2-/8" OD Flange, Roll Pin and Spring Kit 1 of each (184 on) 6 2 Standard Foot Pedal, 2-/8" OD Flange, Roll Pin and Spring Kit 1 of each (184 on) 1044 Oscillating Handle Standard 2-/8" OD Flange with roll pin 1 of each (184 on) A Optional " OD Flange with Roll Pin 1 of each (16-8) 06004A Spring Kit 5 per A Compression Sleeves & Nuts for /8" OD Tube (6 of each) Handle Cage Assembly ( for all handles except 5/8" push button) Handle Cage and 5/8" Push Button Assembly A O Ring Kit 12 per A Screw Package 12 per A Body Gland A /8" Hex Nuts 12 per Pressure Loss Check Valve A Body Assembly (factory set to 6 Litre flush field adjustable) A Optional Retrofit Kit to make pre-12 valves Non-Hold Open A Cap Screw Kit 12 per Regulating Screw and O Ring A O Ring Kit 12 per A Cap and Regulating Screw (factory set to 6 Litre flush field adjustable) A Filter Screen Kit 12 per (Optional only not in standard models) A Water Closet Poppet Pin Pack per A Urinal Poppet Pin Pack per ITEM # PART # DESCRIPTION Diaphragm/Guide Assembly Complete 0600A Rubber Diaphragm Only Kit 12 per A Brass Renewable Seat with Gasket 06041A Wrench for changing Brass Seats 06006A Wrench Kit for changing both Brass and Plastic Renewable Seats 1 of each wrench A 1.85" Long Adjustable Tail (Standard on all models for 4.1"-5.1" centers) 06054A 2.81" Long Adjustable Tail (Optional for field change to 5.1"-6.06" centers) 06055A.6" Long Adjustable Tail (Optional for field change to 6.06"-6.4" centers) 128 Extension (Optional for field addition when added to above tails, adds 2.62" to above dimensions) Union Nut Retaining Ring A O Ring Kit 12 per A /8" Compression Union Body (requires #10 also) A 1/4" MIP x /8" Comp. Connector (requires #10 also) A Angle connector 1/4" MIP x /8" Comp. (requires #10 also) A Handle Adaptor " MIP x 1" Copper Sweat Inlet Adaptor (Standard for all Water Closet valves) " MIP x /4" Copper Sweat Inlet Adaptor (Standard for all Urinal valves) " MIP x /4" FIP Inlet Adaptor (Optional for field change on all Urinal valves) Angle Stop, Nut and Tail Complete A Check Structure Kit Complete can be used to retrofit earlier non-spring loaded cartridges 10040A Check Structure Repair Kit Spring, Seat, and O Ring 1 of each Handle and Screw 1 of each

3 Concealed Valve Outlets Only COMMON FOR REGULAR MODELS REGULAR & TRAP SEAL MODELS 8mm (1.5") MIP 8T COMMON FOR TRAP SEAL MODELS 2 8T140 SERIES T240 SERIES T40 SERIES T40 SERIES T40 SERIES 21 22

4 80 Concealed Valve Outlets Only ITEM # PART # DESCRIPTION 1 25 Tube and Adaptor assembly Standard Vacuum Breaker Assembly 06008A 1-1/2" Rubber and Fibre Washer Kit 12 of each A Standard 1-1/2" Dia. X 10" Long Rough Tube A Optional 1-1/2" Dia. X 22-/4" Long Tube A Standard Male Thread Coupling Nut Optional Female Thread Coupling Nut for pre-10 valves A 1-1/2" Spud Flange /2" Rough Coupling Nut and Washers /2" Dia. X 10.25" Long Trap Seal Primer Tube with Standard Vacuum Breaker and Male Thread Coupling Nut A 1/4" MIP X /8" Comp.Adaptor A Compression Sleeves and Coupling Nuts for /8" OD tube 6 of each A 1-1/4" Rubber Washer Kit 12 per /2" Rough Elbow with Nut and Washers /2" Dia. X 16" Long Rough Tube Thread One End A Stainless Steel Wall Flange /2" Dia. X 16" Long Chrome Tube Thread One End /2" Dia. X 6.62" Long Chrome Tube Thread One End A /4" Dia. X 16" Long Rough Tube Thread One End Nut, Rubber Washer and Fibre Washer A Rubber Washer and Fibre Washer Kit 12 of each A 1-1/2" X /4" Threaded Adaptor A 1-1/4" Dia. X 16" Long Chrome Tube Thread One End A 1-1/2" X 1-1/4" Threaded Adaptor /2" Chrome Coupling Nut and Washers (For Washers only, See #) A 1-1/2" Chrome Elbow with Nut and Washers /4" Coupling Nut and Rubber Washer

5 6600 Universal Teck Flush Valve Washers & O Rings Kit NOTE: 1) The 06010A Repair Parts Kit includes one of each of the parts shown (at right) with the 06010A Kit. 2) For **Package quantities check the Parts Section of the latest Delta Commercial Price List. ITEM # DESCRIPTION INDIVIDUAL PARTS KIT TECK I TECK II 1 Fibre Gasket (for regulating screw cap) 06010A X 2 Fibre Gasket (for renewable seat) 06008A** X X Diaphragm 0600A** X X 4 Seat Washer (for handle cage) A** X X 4a Seat Washer (for 11 handle cage) A** X 5 Leather Gasket (for TECK I handle assembly) 06010A X 6 Flexible Washer (for TECK I handle assembly) 06010A X Push Pin (for TECK I handle assembly) 06010A X 8 O Ring (for adjustable tail, inlet stop bonnet) A** X O Ring (for inlet stop stem) A** X 10 O Ring (for TECK II regulating screw) A** X 11 Fibre Gasket (for diaphragm/guide assembly) 1018 X 12 Stainless Steel Screw (for diaphragm/guide assembly) 06014A** X 1 O Ring (for TECK II handle cage) 06005A** X 14 O Ring (for handle cage) A** X 14a O Ring (for handle cage) 06050A** X Part No Washers & O Rings Repair Kit TECK I TECK II

6 Universal Teck Flush Valve Cage, Washers & O Ring Kit NOTE: 1) The 06010A Repair Parts Kit includes one of each of the parts shown (at right) with the 06010A Kit. 2) For **Package quantities check the Parts Section of the latest Delta Commercial Price List. ITEM # DESCRIPTION INDIVIDUAL PARTS KIT TECK I TECK II 1 Fibre Gasket (for regulating screw cap) 06010A X 2 Regulating Screw and O Ring 028 X X Fibre Gasket (for renewable seat) 06008A** X X 4 Diaphragm 0600A** X X 5 Seat Washer (for handle cage) A** X X 6 Spring (TV21) (for TECK I handle assembly) 06010A X Leather Gasket (for TECK I handle assembly) 06010A X 8 Flexible Washer (for TECK I handle assembly) 06010A X Push Pin (for TECK I handle assembly) 06010A X 10 Spring (TV22) (for TECK I handle assembly) 06010A 11 Relief Valve (TV ) (for TECK I handle assembly) 06010A X 12 O Ring (for adjustable tail, inlet stop bonnet) A** X 1 O Ring (for inlet stop stem) A** X 14 O Ring (for TECK II regulating screw) A** X 15 Fibre Gasket (for diaphragm/guide assembly) 1018 X 16 Stainless Steel Screw (for diaphragm/guide assembly) 06014A** X 1 Handle Cage Sub Assembly 11 X X 18 Spring (for handle) 06004A** X Part No Parts, Washers & O Rings Repair Kit TECK I TECK II