PARTS MANUAL SECTION CHISEL PLOW 2012 PRODUCTION - SERIAL # & UP WIL-RICH

Transcription

1 PARTS MANUAL 0 - SECTION CHISEL PLOW 0 PRODUCTION - SERIAL # 00 & UP Printed in USA (99B) / WIL-RICH PO Box 00 Wahpeton, ND 0 PH (0) - Fax (0) -

2 Orientation Any reference to left (L) or right (R) sides or components is to be understood as being viewed from behind the implement and looking forward. Serial Number Break Every implement has a serial number located on the frame. These serial numbers are consecutively assigned to the implements as they are manufactured. To aid in part ordering, we reference to the serial number at the point the change occurred to provide an accurate means of determining the proper parts. See contents graphic, page, for location. Modifications It is the policy of WIL-RICH Operations to improve its products whenever possible and practical to do so. We reserve the right to make changes, improvements, and modifications at any time without incurring the obligation to make such changes, improvements and modifications on any equipment sold previously. Abbreviations ACT... Actual ASSY... Assembly BLD...Blade BRKT... Bracket CTR... Center CP... Cup Point (FF)... Female Female GR... Grade of Bolt HD...Heavy Duty HDWE... Hardware LH... Left Hand (MF)... Male Female MF... Main Frame MTG...Mounting NC... National Course Thread NF... National Fine Thread NPT... National Pipe Thread RH... Right Hand SS... Screw Stop SST... Stainless Steel TA... Tandem TBP... Top Bypass W/... With W/O... Without CONTENTS FRONT HITCH/FRAME... MAIN FRAME... MAIN/WING LIFT AXLE... MAIN FRONT LIFT AXLE... WING FRONT LIFT AXLE... ' & ' STUB ATTACHMENTS FT WING COMPONENTS... 0 FT WING COMPONENTS... WING AXLE COMPONENTS... FT OUTER WING... WING FOLD CYLINDERS... MAIN LIFT TOP BYPASS CYLINDER... SINGLE POINT DEPTH CONTROL... - BASE WING FOLD HYDRAULICS... 9 FT W/FT OUTER WING FOLD HYD... 9 FT W/FT OUTER WING FOLD HYD... 0 MAIN LIFT HYDRAULICS - FT BASE... MAIN LIFT HYDRAULICS - FT BASE LB CP SHANK ASSY... 0 LB SHANK ASSEMBLY... BOLT HUB - " SPINDLE ASSY... GAUGE WHEEL HUB & SPINDLE... FRONT GAGE WHEEL... TIRES, ASSEMBLIES, RIMS, VALVE STEMS... SPIKES... 9 REAR HITCH W/HINGED TONGUE... 0 HEAVY DUTY REAR HITCH... LIGHTS... DECALS... WARRANTY... Standard Nuts and Lock Washers /NC Nut / Lock Washer 0 /NC Nut / Lock Washer 0 /NC Nut 0 / Lock Washer /NC Nut 9 / Lock Washer 0 /NC Nut 0 / Lock Washer /NC Nut / Lock Washer Note: Standard nuts and lock washers mat not be called out. Anything other than standard will be called out.

3 CONTENTS STUBS... 9 WING FOLD HYDRAULICS MAIN LIFT HYDRAULICS... - HYDRAULIC CYLINDERS... - WING/WING AXLE COMPONENTS... SERIAL TAG LOCATION MAIN FRAME COMPONENTS... MAIN HITCH COMPONENTS... GAUGE WHEELS...- WINGS... 0-

4 FRONT HITCH/FRAME COMPONENTS SEE PAGE SEE PAGE 00.WMF / PART NO. DESCRIPTION PART NO. DESCRIPTION CAST DUAL HITCH JACK 0 0 WING REST HEADLESS PIN (H) () X-/ MOUNT PLATE PAINTED / X -/ ROLL PIN MOUNT PLATE PAINTED 9 YOKE HUB ASSEMBLY ("SPINDLE) FT MAIN FRAME-00 CP F HYD CYL X. TBP ILP FGS #A9CY FORMED CHANNEL-HYD HOSE BRKT 0 NUT HEX /-0NC Z 99 RIGHT HITCH FRAME TUBE 0 WSHR HLK /ID(/ACT) Z 99 MAIN HITCH 0 90 BLT HEX /-0NCX YZ 999 RIGHT HITCH TUBE BLT HEX /-0NCX Z 99 LEFT HITCH TUBE BLT HEX -/-NCX-/ Z 99 MAIN FRAME MAST TUBE - LONG 9 NUT POSLK /-NC Z 99 PIVOT PIN 0 BLT HEX /-NCX Z 99 LEFT HITCH FRAME TUBE 0 NUT POSLK -/-NC Z 99 FRONT CROSS TUBE 0 WSHR FLAT -/(-/XACT) Z 0 GAGE WHEEL YOKE NUT JAM -/-NC Z 9 ADJUST LINK - HIGH (ZINC) 9 BLT HEX -/-NCX Z

5 MAIN FRAME COMPONENTS 9 SEE PAGE PART NO. DESCRIPTION PART NO. DESCRIPTION IN HUB & SPINDLE (LG00) 99 MAIN AXLE ASSY WING REST AXLE CLAMP ASSEMBLY (RED) 9 CP SHANK STUB / X -/ ROLL PIN STUB PLATE PAINTED 0 HEADLESS PIN() -/X. MOUNT PLATE PAINTED 0 NUT HEX /-0NC Z MOUNT PLATE PAINTED 0 WSHR HLK /ID(/ACT) Z FT MAIN FRAME-00 CP BLT HEX /-0NCX Z 99 RIGHT HITCH FRAME TUBE 90 BLT HEX /-0NCX YZ 999 RIGHT HITCH TUBE BLT HEX /-0NCX Z 99 LEFT HITCH TUBE NUT POSLK /-0NF P 99 MAIN FRAME MAST TUBE - LONG 9 BLT HEX /-0NFX-/ Z 99 LEFT HITCH FRAME TUBE 0 WSHR FLAT -/(-/XACT) Z 99 FRONT CROSS TUBE 9 BLT HEX /-0NC X Z

6 MAIN/WING LIFT AXLE COMPONENTS SEE PAGE PART NO. DESCRIPTION PART NO. DESCRIPTION 0 BEARING CONE -/ID (0) 9 ADJUST LINK - HIGH (ZINC) 0 BEARING CUP.OD (0) 0 SEAL IN HUB & SPINDLE (LG00) SPRING TENSION BUSHING (-/") TANDEM SHAFT 0 -/NF HYDRA JAM LOCK NUT BEARING BUSHING / X -/ ROLL PIN 00 -/" CHNL LOCK 0" (BLK) 0 HEADLESS PIN() -/X. 9 RIGHT X0 WALKING TANDEM 0 NUT POSLK /-0NF P 9 LEFT X0 WALKING TANDEM 9 BLT HEX -/-NCX-/ Z WING AXLE - RIGHT INNER 9 BLT HEX /-0NFX-/ Z WING AXLE - LEFT INNER 0 WSHR FLAT -/(-/XACT) Z 99 MAIN FRAME MAST TUBE - LONG NUT JAM -/-NC Z 99 MAIN AXLE 0 90 / X -/ LYNCH PIN

7 MAIN FRONT LIFT AXLE COMPONENTS SEE PAGE FOR MOUNTING PART NO. DESCRIPTION PART NO. DESCRIPTION DAMPER BRAKE PAD GAUGE WHEEL PIVOT DAMPER CAP 9 HEADLESS PIN() -/X9-9/ TOP DAMPER BRACKET RED -/" COMPRESSION SPRING 9 PIN (ZINC) WSHR FLAT /(/XACT) Z 0 PIVOT PIN (-/ X 0) 0 FTG GRS /- 0-B 9 TOP LINK ARM BLT HEX /-NCX-/ Z MAIN LOWER GAGE ARM NUT NLK /-0NC Z 99 CENTER LIFT MAST PIN ROLL /DIAX-/ Z 0 0 GAGE WHEEL YOKE 9 NUT TOP LK /-NC Z SPRING TENSION BUSHING (-/") FTG GRS /-NF DEG 0-B

8 WING FRONT LIFT AXLE COMPONENTS SEE PAGE SEE PAGE PART NO. DESCRIPTION PART NO. DESCRIPTION 009 COLLAR 9 BLT HEX / X 0NC X YZ GAUGE WHEEL PIVOT 99 BLT HEX -NC X YZ 9 HEADLESS PIN() -/ X 9-9/ 0 WHL ASSY X. B 0" P GRAY 9 YOKE HUB ASSEMBLY ("SPINDLE) 0 PIVOT PIN (-/ X 0) BLT HEX /-0NC X Z 9 TOP LINK ARM NUT POSLK -NC Z OUTER FRONT MAST ARM NUT POSLK /-0NC Z 0 GAGE WHEEL YOKE BLT HEX /-NC X -/ Z FRONT LIFT MAST 9 NUT TOP LK /-NC Z 9 LIFT MAST LOCK PLATE

9 ' & ' STUB ATTACHEMENTS - FITS X & X FRAME TUBES ' STUB GRP W/MTG HDW FITS X & X FRAME TUBES ITEMPART NO. DESCRIPTION FT CHISEL PLOW STUB (x/) STUB PLATE 9 CP SHANK STUB STUB PLATE PAINTED /NCx GR BOLT NUT POSLK /-0NC Z BOP ' STUB GRP W/MTG HDW FITS X & X FRAME TUBES ' STUB ATTACHMENT - FITS x FRAME TUBES ' STUB GRP L/MTG HDWE (x) STUB GROUPS CONTAIN PAIRS OF STUBS WITH HARDWARE ITEMPART NO. DESCRIPTION 9 MAIN FRAME FT STUB /NCxx-/ U-BOLT 9 WSHR HLK /ID(/ACT) NUT HEX /NC 9_C.PLT 9

10 9 FT WING COMPONENTS LEFT WING SHOWN, RIGHT OPPOSITE SEE PAGE FOR WING AXLE PARTS PART NO. DESCRIPTION PART NO. DESCRIPTION HEADLESS PIN (H) () X-/ 0 BLT HEX -NCX-/ Z / X -/ ROLL PIN 0 BLT HEX -NCX-/ Z WING LIFT BUSHING 90 NUT NYLON LOCK -NC Z 0 NUT HEX /-0NC Z 00 SHORT WING LIFT STRAP NUT HEX /-NC Z WING REST FLAT 9 WSHR HLK /ID(/ACT) Z LIFT BRACKET - LEFT 0 WSHR HLK /ID(/ACT) Z LIFT BRACKET - RIGHT BLT-U /-NCXX-/ Z CP LIFT LINK 9 WSHR FLAT (-/X-/ACT) 999 9FT WING BRACE 0 99 BLT HEX -NCX Z 09 9FT 00 CP WING-LEFT-0 0 BLT HEX /-0NCX-/ Z 09 9FT 00 CP WING-RIGHT-0 BLT HEX -NCX-/ Z 9F CYL HYD X0 FGS #A9CY0 0

11 FT WING COMPONENTS LEFT WING SHOWN, RIGHT OPPOSITE SEE PAGE FOR WING AXLE PARTS PART NO. DESCRIPTION PART NO. DESCRIPTION HEADLESS PIN (H) () X-/ 0 BLT HEX -NCX-/ Z / X -/ ROLL PIN 90 NUT NYLON LOCK -NC Z WING LIFT BUSHING WING REST FLAT 0 NUT HEX /-0NC Z LIFT BRACKET - LEFT 0 WSHR HLK /ID(/ACT) Z 00 CP TH HINGE 9 WSHR FLAT (-/X-/ACT) Z LONG WING LIFT STRAP 00 9 BLT HEX -NCX-/ Z LIFT BRACKET - RIGHT 99 BLT HEX -NCX Z CP LIFT LINK 0 BLT HEX /-0NCX-/ Z 09 FT 00 CP WING-LEFT-0 BLT HEX -NCX-/ Z 099 FT 00 CP WING-RIGHT-0 0 BLT HEX -NCX-/ Z 9F CYL HYD X0 FGS #A9CY0

12 WING AXLE COMPONENTS BUTT END SEE PAGE SEE PAGE FOR WALKER INFO PART NO. DESCRIPTION PART NO. DESCRIPTION IN HUB & SPINDLE (LG00) BLK 0 WSHR FLAT -/(-/ X ACT) Z AXLE CLAMP ASSEMBLY (RED) NUT JAM -/-NC Z PIN ROLL / X -/ Z 90 NUT NLK -NC Z 0 HEADLESS PIN() X. 9 BLT HEX /-0NC X Z 0 HEADLESS PIN() -/X. HEADLESS PIN() X.00 0 NUT HEX /-0NC Z HEADLESS PIN() X-/ 0 WSHR HLK /ID(/ACT) Z LEFT INNER WING AXLE ASSY WSHR FLAT (-/ X -/ACT) Z 0 RIGHT OUTER WING AXLE ASSY - 0 BLT HEX -NC X Z WING MAST TUBE 00 BLT HEX /-0NC X Z 9 CYLINDER END PLATE 0 NUT POSLK /-0NF Z ADJUST LINK BLT HEX /-0NC X Z WING ADJUST TUBE SEC / 0 9 BLT HEX -/-NC X -/ Z BUSHING (ZINC) NUT POSLK /-0NC Z 099 WING ADJUST STRAP 9 BLT HEX /-0NF X -/ Z F HYD CYL X0. TBP ILP FGS #A9CY BLT HEX -NC X -/ Z

13 ' OUTER WING 0 9 ITEMPART NO. DESCRIPTION FT CP WING - LEFT (SHOWN) FT CP WING - RIGHT 0 HEADLESS PIN x-/ PIN ROLL /DIAx F HYD CYL x (SEE PAGE ) ' STUB GRP W/MTG HDW F x0. HYD CYL (SEE PAGE ) 9 WSHR FLAT (-/X-/ACT) Z / X -/ ROLL PIN 9 HEADLESS PIN X. 0 HEADLESS PIN X-/ NOTE: DETAILS TO ITEM () SHOWN ON PAGE 0. ITEMS - ARE REQUIRED FOR FT WINGS WHEN USED WITH FT INNER WINGS. PARTS ARE INCLUDED WITH THE FT ADD-ON KITS FOR FT INNER WINGS. ITEMPART NO. DESCRIPTION 0 LIFT BRACKET - LEFT 0 LIFT BRACKET - RIGHT WING LIFT LINK 0 RESTRICTED FOLD LINK BLT HEX /-0NCX-/ Z 0 BLT HEX /-0NCX-/ Z WING REST FLAT

14 WING FOLD CYLINDERS Vendor/WIL-RICH P/N Info is laser etched on barrel opposite the base port ITEMS NOTED AS "NS" ARE NOT AVAILABLE, CHECK WITH WIL- RIC SERVICE PARTS FOR OTHER PART AVAILABILITY. COLUMN WIL-RICH PART NO. SIZE ROD DIA. PIN DIA. A F x 0 -/" " B F. x -/" " C F x -/" " D 9F x 0 -/" " E 0F x " " F 09F x 0 " " G F x -/" " ITEM DESCRIPTION REQ. A B C D E F G Barrel NS 09 0 Retainer Ring Ext. Snap Ring 0 0 Snap Ring Head NS 9 9 Rod 0 9 Clevis Pin Roll Pin /x-/ Piston NS 9 Lock Nut Seal kit (Includes items ) Stop collar Piston Seal In seal kit only Head O-Ring In seal kit only Head Backup Ring In seal kit only Rod Wiper In seal kit only Rod Cup Seal In seal kit only Wear Ring In seal kit only Rod (F) 0 9 Set Screw (F) 0 0 Clevis (F) CHECK THE WIL-RICH PART NO. ON THE CYLINDER WHEN ORDERING REQUIRED PARTS

15 F & F SERIES CYLINDERS Ask if cylinder is side or top port. Vendor/WIL-RICH P/N Info is laser etched on barrel opposite the base port. 0 9 MAIN LIFT TOP BYPASS CYLINDER SIDE PORT AND IN LINE PORT (SHOWN) CYLINDERS REQUIRE THE SAME SERVICEABLE COMPONENTS. ITEMS NOTED AS "NS" ARE NOT AVAILABLE. 9 0 COLUMN PART #/DESC SIZE-PORTS ROD DIA. PIN DIA. A F x9.-side -/" " B 0F x0.-side -/" " C 0F x.-side -/" " A 0F x9.-in LINE -/" " B F x0.-in LINE -/" " C F x.-in LINE -/" " ITEM DESCRIPTION REQ. A B C Barrel NS Internal Head NS Thumb Screw Screw Collar Rod End Clevis Set Screw HDLS Pin x-/ Roll Pin /x. 9 Cylinder Rod Stop Collars Piston NS Rod Nut Seal Kit (INCLUDES ITEMS -0) CHEM-CAST SEAL IN SEAL KIT ONLY HEAD O-RING IN SEAL KIT ONLY HEAD BACK-UP RING IN SEAL KIT ONLY ROD WIPER IN SEAL KIT ONLY LOADED U-CUP IN SEAL KIT ONLY 9 WEAR RING IN SEAL KIT ONLY 0 PISTON O-RING

16 90 SINGLE POINT VALVE ASSEMBLY TURN = ¼ INCH ITEM PART NO. DESCRIPTION QTY ELB MJ X MPT TEE MJ X MJ X MJ VALVE SPACER (ZINC) SPACER TUBE (ZINC) SINGLE POINT BRACKET 9 DCV ASSEMBLY 9 NUT POSLK /-NC Z 0 NUT POSLK /-NC 9 BLT HEX /-NCX-/ Z 0 BLT HEX /-NCX-/ Z 90 DEPTH ADJUSTMENT DECAL

17 SINGLE POINT TUBE ASSEMBLY ITEM PART NO. DESCRIPTION QTY 0 ADJUST EAR SLIDE ADJUST 0 SPRING PIN (ZINC) 00 SPRING ADJUST CRANK - LONG 0 CP SINGLE POINT TUBE 0 SINGLE POINT TUBE NUT POSLK /-0NC Z 9 NUT JAM /-NC Z 0 PIN ROLL /DIAX-/ Z 99 BLT HEX /-0NC X -/ Z 90 PIN ROLL /X-/ Z 09 BLT HEX /-NCX-/ Z 90 SINGLE POINT TUBE BLT HEX /-NCX-/ Z 9 NUT POSLK /-NC Z NUT POSLK /-NC Z

18 0 WING FOLD HYDRAULICS 9FT & FT INNER WINGS NO OUTER WINGS 0 00A.WMF /09 ITEMPART NO. DESCRIPTION 0 MORBxMJ ELBOW /x HOSE (FF) /x HOSE (FF) 0 /x HOSE (FF) MJxMJxMJ TEE 900 WINGS UP DECAL 90 WINGS DOWN DECAL MJxMPT COUPLER ADAPTER 9 00 QUICK DISCONNECT COUPLER 0 9F x0 HYDRAULIC CYLINDER 90 CROSS MJ X MJ X MJ X MJ /x0 HOSE (FF) /x HOSE (FF) 9

19 0 WING FOLD HYDRAULICS 9' INNER WINGS W/FT OUTER WING 0 00Z.WMF / ITEMPART NO. DESCRIPTION 0 /X HOSE (FF) /X HOSE (FF) /x0 HOSE (FF) F HYD CYL X 90 CROSS MJ /x HOSE (FF) 900 WINGS UP DECAL 90 WINGS DOWN DECAL 9 ADP MJ X MPT 0 00 QUICK COUPLER 9 ITEMPART NO. DESCRIPTION 0 MORBxMJ ELBOW 9 /x0 HOSE (FF) TEE MJ X MJ X MORB 9F HYD CYL X0 /X0 HOSE (FF) /X0 HOSE (FF) /X HOSE (FF) 0 SEQUENCE VALVE 9 /X HOSE (FF) 0 TEE MJ 9

20 0 WING FOLD HYDRAULICS ' INNER WINGS W/FT OUTER WING ITEMPART NO. DESCRIPTION 0 MORBxMJ ELBOW 00 /x HOSE (FF) TEE MJ X MJ X MORB 9F HYD CYL X0 /X HOSE (FF) /X0 HOSE (FF) /X HOSE (FF) 0 SEQUENCE VALVE /X HOSE (FF) 0 TEE MJ ITEMPART NO. DESCRIPTION 0 /X HOSE (FF) /X HOSE (FF) F HYD CYL X 90 CROSS MJ /x HOSE (FF) 900 WINGS UP DECAL 90 WINGS DOWN DECAL ADP MJ X MPT 9 00 QUICK COUPLER 0

21 0 9 00C.WMF /0 ITEM PART NO. DESCRIPTION ADP MJ X MPT TEE MJ X MJ X MJ HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X0 FJX-FJX 9 HSE KPSI /X9 FJX-FJX 00 HSE KPSI /X FJX-FJX 0 ELB MORB X MJ 9 90 MAIN UP DECAL 0 90 MAIN DOWN DECAL 9 HSE KPSI /X0 FJX-FJX 00 QUICK DISCONNECT COUPLER F HYD CYL X. BP FGS A9CY F HYD CYL X0. BP FGA A9CY 0 MAIN LIFT HYDRAULICS - FT BASE

22 9 0 00C.WMF /0 0 MAIN LIFT HYDRAULICS - FT BASE ITEM PART NO. DESCRIPTION ADP MJ X MPT TEE MJ X MJ X MJ HSE KPSI /X FJX-FJX HSE KPSI /X FJX-FJX 0 HSE KPSI /X0 FJX-FJX 0 HSE KPSI /X0 FJX-FJX 0 ELB MORB X MJ 90 MAIN UP DECAL 9 90 MAIN DOWN DECAL 0 9 HSE KPSI /X0 FJX-FJX 00 QUICK DISCONNECT COUPLER HSE KPSI /X FJX-FJX F HYD CYL X. BP FGS A9CY F HYD CYL X0. BP FGA A9CY

23 000 LB CP SHANK ASSEMBLY - CORNER MOUNT COMPLETE SHANK ASSEMBLY ITEMPART NO. DESCRIPTION 9 SHANK (GRAY) 9 CAST SHANK HOLDER CHISEL PLOW SHANK HOLDER 9 SIDE PLATE LH 9 SIDE PLATE RH COMPRESSION SPRING (GRAY) C SPRING RETAINER CAST CORNER CAP (GRAY) /NC-A GR CARRIAGE BOLT 0 9 PIVOT BOLT (CP SHANK) 9 /NCx GR GR BOLT 99 /NCx-/ GR BOLT 9 /NCx-/ GR BOLT 9 /NCX-/ GR BOLT WSHR FLAT /(/XACT) Z 0.PLT ITEMPART NO. DESCRIPTION 9 /NCx-/SHTNCK CARRIAGE BOLT 9 WSHR FLAT (-/x-/act) NCx GR HVY HEX BLT W/NYLK 9 NUT POSLK /NC 0 9 NUT POSLK NF 9 9/ x SPACER 9 WSHR HLK /ID(/ACT) NUT HEX /NC 9 SPRING TENSION BUSHING 0 WSHR HLK /ID(/ACT) Z 9 BUSHING 0 WSHR FLT /SAE(/X-/) NUT TOP LK /NC 9 0 SPRING BRACKET 0 COMPRESSION SPRING PACKAGE COMPARE THE SHANK COMPONENTS TO DEFINE SERVICE PARTS REQUIRED

24 0 LB CP SHANK ASSEMBLY - CURRENT NOTE: ONE () PAINTED SPRING ASSEMBLY (9) IS SHOWN, TWO () ARE REQUIRED PER SHANK AS- SEMBLY ITEMPART NO DESCRIPTION 0 " Degree CP Shank Assembly 9. Spring Assembly (") (Includes Items -) 9 BLT HEX /-NFX-/ YZ 0 CAST TOP PLATE (GRAY) 9 NF Lock Nut 00 SHANK HOLDER FRAME BRACKET 9 NUT NYL /-NF YZ 9 NUT POSLK /-NC Z 9 Pivot Bolt /NCxx-/ U-Bolt 9 NUT POSLK /-0NC Z 0 " Degree CP Shank ITEMPART NO DESCRIPTION 9 Ductile Pivot Arm 00 Adjustment Bolt 9 Cast Spring Plug 9 -/ Extension Spring (") 9 Spring Clevis 9 Stop Collar /NCx-/ GR Bolt / SAE Flat Washer(/x-/) 9 0 /NCx-/ HDN Bolt 0 /NC Nylock Nut 90 / Spring Tension Bushing 9 BLT HEX /-NCX YZ 0 - COMPLETE SHANK ASSY W/MOUNTING PLATE & HARDWARE

25 BOLT HUB WITH " SPINDLE 9 0.PLT ITEMPART NO. DESCRIPTION BOLT HUB & " SPINDLE ASSY (INCLUDES - & 9-) 0 PIN COT /DIAx-/ 09 SPINDLE WASHER /ID 0 BEARING CONE -/ID (LM0) 09 IN PRESSED HUB W/ CUPS 0 BEARING CUP. OD (LM00) FTG GRS /NPT 0-BL(/") 9 BEARING CUP.9 OD (LM00) 9 " TRIPLE LIP SEAL 0 9 /NFx-/ GR BOLT 0 NUT POSLK /NF " AXLE SPINDLE BEARING CONE -/ID (LM09) WHEEL BOLT /NFx (/ HEAD) 0 NUT SLTD /NF DUST CAP

26 GAUGE WHEEL HUB & SPINDLE ITEM PART NO DESCRIPTION YOKE HUB ASSEMBLY (" SPINDLE) 09 " INTERNAL TRIPLE LIP SEAL / NPT GREASE FITTING 0 -/ DIAx SPINDLE BEARING CONE 0 BEARING CUP 9 -BOLT HUB W/CUPS (INCLUDES ITEM ) REPLACE BY 9 ITEM PART NO DESCRIPTION 9/ NFx-/ WHEEL BOLT 00 ODx SEALED SPINDLE TUBE MUST ORDER ITEM WITH TUBE 9 0 SPINDLE LOCK 0 99 NF SLOTTED NUT / x COTTER PIN SHAFT SEAL O-RING (REQ. W/00)

27 FRONT MOUNT RIGID GAUGE WHEEL 0 9 ALSO SEE PAGE ITEMPART NO. DESCRIPTION STABILIZER GAUGE WHEEL W/ 9:L TIRE (PAIR) GAUGE WHEEL MOUNT HINGE PLATE GAUGE WHEEL MAST ADJUST ROD SUB ASSY-PLATED 9 GAUGE WHEEL LEG GAUGE WHEEL CRANK HUB & " SPINDLE ASSY 90 WHL ASSY 9.L x B P GRAY 9 /NCxx-/ U-BOLT 0 9 /NCx GR BOLT 0 /NCx-/ GR BOLT /NFx (/ HEAD) NUT POSLK /NC 9 NUT POSLK /NC 99 GAGE WHEEL LOCK

28 TIRE ASSEMBLIES, RIMS, TIRES, VALVE STEMS IDENTIFY WHICH TIRE ASSEMBLY YOU REQUIRE, MOST WIL-RICH IMPLEMENTS HAVE MULTIPLE TIRE/RIM OPTIONS. ASSEMBLY DESCRIPTION 90 WHL ASSY 9.LX B " PLY 09 RIM X B (WV PO) TIRE 9LX PLY 0 VALVE STEM ASSY TR WHL ASSY LX B " P GRAY 09 RIM X B (WV PO) 90 TIRE L X PLY 0 VALVE STEM ASSY TR 9 WHL ASSY LX B 0" PGRAY 9 TIRE L X PLY RIM X0 B (W0VP0) 90 VALVE ASSEMBLY (STEEL) 0 WHL ASSY X. B 0" P GRAY 0 X.0- PLY TIRE RIM X0 B (W0VP0) 90 VALVE ASSEMBLY (STEEL) WHL ASSY.0-FI B 0IN F 09 RIM X 0 B - (W0V P0).0- FI F HWY IMP TIRE 90 VALVE ASSEMBLY (STEEL)

29 SPIKES A C B 90A ITEM PART NO DESCRIPTION A 9 /xx Spike w/ Hrwe Pkg B 090 " Twisted Concave LH Spike w/ Hrwe Pkg C 09 " Twisted Concave RH Spike w/ Hrwe Pkg NUT HVY /-NC P WSHR FLAT /(9/X-/ACT) Z 9 BLT PLW /-NCX-/NO GRADE PLAIN 9

30 REAR HITCH W/HINGED TONGUE ITEMPART NO. DESCRIPTION REAR HITCH TUBE (") HITCH MOUNT HITCH PIN(x-/) 90 SPRING 0 COTTER PIN (/x-/) 9 /NCx GR BOLT 9 /NCx GR BOLT HINGE TONGUE ASSEMBLY 9 HITCH TUBE MOUNT 0 /NCxx-/ U-BOLT TUBE STRAP THIS HITCH FITS ONLY 0 FT MAIN FRAMES AND MAY PREVENT USE OF OTHER OPTIONS. 0

31 HEAVY DUTY REAR HITCH THIS HITCH FITS ONLY 0 FT MAIN FRAMES AND MAY PREVENT USE OF OTHER OPTIONS. ITEMPART NO DESCRIPTION 9 LEFT INNER HITCH TUBE 00 RIGHT OUTER HITCH BRACE 0 LEFT OUTER HITCH BRACE 0 RIGHT INNER HITCH BRACE 0 HITCH DOWN TUBE TUBE STRAP HITCH MOUNT BLT-U /-NCXX-/ Z 9 0 NUT HEX /-0NC Z 0 BLT HEX /-0NCX Z ITEMPART NO DESCRIPTION 90 BLT HEX /-0NCX YZ BLT HEX -NCX-/ Z NUT HEX /-NC Z 9 WSHR HLK /ID(/ACT) Z 0 WSHR HLK /ID(/ACT) Z NUT TOP LK -NC Z CAST HITCH 9 BLT HEX -/-NCX Z 9 0 NUT POSLK -/-NC Z

32 LIGHTS 9 0 ITEM PART NO DESCRIPTION LIGHT KIT (RIDGID) 0 LIGHT KIT (, WING) 0 LIGHT KIT (9, WING) 9 SQUARE TIE LOOP /NCxx-/ U-BOLT 0 SHORT BASE PIVOT 0 /NCx/ SQ HEAD SET SCREW 0 /NC NUT YELLOW DECAL LIGHT/REFLECTOR BRACKET 0 /NCx BOLT 9 AMBER LIGHT RED LIGHT 0 RED DECAL ITEM PART NO DESCRIPTION RED/ORANGE FLUORESCENT DECAL 0 x LIGHT ARM x LIGHT ARM " OFFSET LIGHT ARM 0 AG LIGHT KIT AG MODULE WISHBONE LEAD 9 HARNESS

33 DECALS WARNING HIGH PRESSURE FLUID HAZARD To prevent serious injury or death: Relieve pressure on system before repairing or adjusting or disconnecting. Wear proper hand and eye protection when searching for leaks. Use wood or cardboard instead of hands. Keep all components in good repair CAUTION TO AVOID INJURY AND/OR MACHINE DAMAGE: Refer to Operator's Manual for safety instructions. Do not stand or climb on machine when operating. Use clean hazard flashers and SMV sign when transporting. Observe highway traffic regulations. MANUAL WIL-RICH 0-0 LEVEL LIFT CHISEL PLOW 9 ITEMPART NO DESCRIPTION WIL-RICH DECAL (-/X-/) DECAL 0 HIGH PRESSURE FLUID HAZARD 0 INTEGRAL RESTRICTOR DECAL 09 BYPASS DECAL SMV KIT 0 WING LOCK DANGER DECAL CAUTION DECAL 9 9 WING LOCK DANGER DECAL WINGS UP DECAL ITEMPART NO DESCRIPTION 90 WINGS DOWN DECAL 90 MAIN UP DECAL 90 MAIN DOWN DECAL 9 CAUTION DECAL AMBER REFLECTOR RED REFLECTOR CAUTION DECAL - READ 0/0 ASSEMBLY MANUAL 0/0 OPERATORS MANUAL 9 9 CLEARANCE LIGHT PACKAGE

34 WIL-RICH, LLC WARRANTY Wil-Rich s products are warranted to the original non-commercial purchaser to be free from defects in material and workmanship for a minimum period of twelve () months from the original date of purchase. Additional Field Cultivator Warranty: Wil-Rich warrants to the original purchaser of each new Wil-Rich Field Cultivator unit (Excel and QuadX), and Disk Field Cultivators that the product be free from defects in material and workmanship for the period of three () years on the main frames and shank assemblies. All other components are covered by the twelve () month warranty period. Commercial Use: Warranty for commercial, rental or custom use of any Wil-Rich product is limited to 90 days, parts and labor. We warrant products sold by us to be in accordance with our published specifications or those specifications agreed to by us in writing at time of sale. Our obligation and liability under this warranty is expressly limited to repairing, or replacing, at our option, within months after date of retail delivery, any product not meeting the specifications. We make no other warranty, express or implied and make no warranty of merchantability or of fitness for any particular purpose. If requested by us, products or parts for which a warranty claim is made are to be returned transportation prepaid to our factory. Any improper use, operation beyond rated capacity, substitution of parts not approved by us, or any alteration or repair by others in such manner as in our judgment affects the product materially and adversely shall void this warranty. No employee or representative is authorized to change this warranty in any way or grant any other warranty. Wil-Rich reserves the right to make improvement changes on any of our products without notice. When warranty limited or not applicable: Warranty on hydraulic hoses, hydraulic cylinders, hubs, spindles, engines, valves, pumps or other trade accessories are limited to the warranties made by the respective manufactures of these components. Rubber tires and tubes are warranted directly by the respective tire manufacturer only, and not by Wil-Rich. This warranty shall not be interpreted to render Wil-Rich liable for injury or damages of any kind or nature to person or property. This warranty does not include claims for, or extend to the loss or damage of crops, loss because of delay in seeding/planting or harvesting, or any expense or loss incurred for labor, substitute machinery, rental, and transportation expense or for any other reason. A Warranty Validation and Delivery Report Form must be filled out and received by Wil-Rich to initiate the warranty coverage. WARRANTY CLAIMS PROCEDURE. The warranty form must be returned to Wil-Rich within thirty (0) working days from the repair date.. Parts returned to Wil-Rich without authorization will be refused. The parts must be retained at the dealership for ninety (90) days after the claim has been filed. If the Service Department would like to inspect the parts, a packing slip will be mailed to the dealer. The packing slip must be returned with the parts. The parts must be returned prepaid within thirty (0) days of receiving authorization. After the parts are inspected and warranty is verified, credit for the return freight will be issued to the dealer.. Parts that will be scrapped at the dealership will be inspected by a Wil-Rich Sales Representative, District Sales Manager or Service Representative within the ninety (90) day retaining period.