PARTS MANUAL SECTION 105 FLEX WING ROTARY CUTTER. Published 09/14

Size: px

Start display at page:

Download "PARTS MANUAL SECTION 105 FLEX WING ROTARY CUTTER. Published 09/14"

Poppy Neal
6 years ago
Views:

8 FLEX WING ROTARY CUTTER Published 09/ PARTS MANUAL SECTION 0 An Operator s Manual was shipped with the

The Operator s Manual is an integral part of the safe operation of this machine and must be maintained with

READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating

1 8 FLEX WING ROTARY CUTTER Published 09/ PARTS MANUAL SECTION 0 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator s Manual is not with the equipment, contact your dealer or Bush Hog to obtain a copy before operating the equipment. Important Operating and Safety Instructions are found in the Mower Safety Video that can be instantly accessed on the internet at:

2 PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section.. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required.. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered. 3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part.. The Manufacturer reserves the right to substitute parts where applicable.. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order. 6. The Manufacturer reserves the right to change prices without prior notice. For maximum safety and to guarantee optimum product reliability, always use genuine BUSH HOG Parts. The use of inferior replacement parts may causepremature or catastrophic failure which could result in serious injury or death.direct any questions regarding parts to: BUSH HOG 0 Griffin Ave. Selma, AL Contact Us Alamo Group Inc.

4 LIMITED WARRANTY Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized Bush Hog dealer, that the equipment be free from defects in material and workmanship for a period of one () year for non-commercial, state and municipalities use and ninety (90) days for commercial use from date of retail sale. The obligation of Bush Hog to the purchaser under this warranty is limited to the repair or replacement of defective parts. Replacement or repair parts installed in the equipment covered by this limited warranty are warranted for ninety (90) days from the date of purchase of such part or to the expiration of the applicable new equipment warranty period, whichever occurs later. Warranted parts shall be provided at no cost to the user at an authorized Bush Hog dealer during regular working hours. Bush Hog reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship. DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES Bush Hog s obligation under this limited warranty, to the extent allowed by law, is in lieu of all warranties, implied or expressed, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE and any liability for incidental and consequential damages with respect to the sale or use of the items warranted. Such incidental and consequential damages shall include but not be limited to: transportation charges other than normal freight charges; cost of installation other than cost approved by Bush Hog; duty; taxes; charges for normal service or adjustment; loss of crops or any other loss of income; rental of substitute equipment, expenses due to loss, damage, detention or delay in the delivery of equipment or parts resulting from acts beyond the control of Bush Hog. THIS LIMITED WARRANTY SHALL NOT APPLY:. To vendor items which carry their own warranties, such as engines, tires, and tubes.. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident. 3. If parts not made or supplied by Bush Hog have been used in connection with the unit, if, in the sole judgement of Bush Hog such use affects its performance, stability or reliability.. If the unit has been altered or repaired outside of an authorized Bush Hog dealership in a manner which, in the sole judgement of Bush Hog, affects its performance, stability or reliability.. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic fluid, worn blades, or to normal deterioration of such things as belts and exterior finish due to use or exposure. 6. To expendable or wear items such as teeth, chains, sprockets, belts, springs and any other items that in the company s sole judgement is a wear item. NO EMPLOYEE OR REPRESENTATIVE OF BUSH HOG IS AUTHORIZED TO CHANGE THIS LIMITED WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE IN WRITING AND SIGNED BY BUSH HOG S SERVICE MANAGER, 0 GRIFFIN AVE., SELMA, ALABAMA Record the model number, serial number and date purchased. This information will be helpful to your dealer if parts or service are required. MODEL NUMBER SERIAL NUMBER DATE OF RETAIL SALE MAKE CERTAIN THE WARRANTY HAS BEEN FILED WITH BUSH HOG SELMA, ALABAMA

5 BUSH HOG/ LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 8 ROTARY CUTTER CONTENTS ALPHABETICAL INDEX PAGE Axle Arms & Related Parts, Center & Wing Units Axles & Related Parts, Single & Dual Base Assembly, Center...0--, 0--3 Base Assembly, R.H. Wing & L.H. Wing...0--, 0-- Blades & Blade Holders...See Base Assemblies Chain, Safety Tow Chains, Discharge Safety...0--, 0--3 Cylinders, Hydraulic , 0-7- Decal Kits Driveline Holder Assembly Driveshafts, Bondioli & Pavesi, & Weasler thru 0-- Gearbox, Transfer (Mfg. by Comer) Gearbox, Center, L.H. & R.H. Wing 0 RPM Hitch Assembly, Clevis Hydraulic Fittings To Tractor Remotes Jackstand LED Light Kit (Rear Lights Only) Leveling Rod Assembly Shield, Wing Driveshafts Shield Assembly, Center SMV Sign & Related Parts Tire, Airplane Tire, Solid & Foam Filled Tongue Assembly...0--

7 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 DECAL KIT Decal Kit, Decal, Amber Reflector Decal, Red Reflector Decal, Bush Hog Logo 8730 Decal, Important D6 Decal, Danger Decal, Model 8 7 D7 Decal, Danger (0 RPM) 8 D9 Decal, Sheet 9 D Decal, Blade Rotation CCW 0 D Decal, Blade Rotation CW D3 Decal, Warning D Decal, Danger 3 D9 Decal, Genuine Bush Hog Parts D6 Decal, Danger D87 Decal, Lubrication Chart 6 D6 Decal, Danger (Thrown Object) 6 7 D83 Decal, Danger - Multilingual 8 93 Decal, Important Decal, Bush Hog Logo Decal, Made In USA 3 0--

8 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 CENTER DECK ASSEMBLY , ,,

9 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 CENTER DECK ASSEMBLY Center Deck w/decals Skid 3 6 Carriage Bolt, 3/8 x -/ Gr. 8 9BH Flatwasher, 3/ Locknut, 3/ Transfer Gearbox (0 - Comer) Gearbox Assy, EZ0 :.69, -3/8, 6-Spline Sight Window, Gearbox 7MM Capscrew, /8 x Gr Locknut, /8 Gr. G Flanged Pin 73BH Presto Pin 9 Ga x 3 D Pltd Weldment, Hinge Pin 9BH Capscrew, / x -/ Gr. 608 Locknut, / Bushing, Tongue Pivot Capscrew, x Gr Locknut, Gr. C Bushing, Axle Pivot 3 0 9BH Grease Fitting Weldment, Pan Blade,.0 CCW, Parallel Uplift Blade Bolt Kit Blade Bolt, 7/8 Ø x 3 Lg Washer, 7/8 Structural-Plain Locknut, Top, 7/8 NF Flatwasher, x x Hardened Cotter Pin, M x Nut, Castle M x

10 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 WING DECK ASSEMBLIES This Parts Illustration applies to RH and LH Wings. RH WING SHOWN 7, ,,, ,,, ,,,

11 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 WING DECK ASSEMBLIES This Parts Listing applies to RH and LH Wings R.H. Wing Frame w/decals 0079 L.H. Wing Frame w/decals 0077 Skid R.H Skid L.H Plow Bolt, 3/8 x -/ 9BH Flatwasher, 3/8 7 8 Lockwasher, 3/ Hex Nut, 3/ Gearbox Assy, EZ 0 :.69 (0 RPM) Capscrew, /8 x Gr Locknut, /8 Gr. G, Flanged Sight Window, Gearbox 7MM Cylinder Pin 03 Roll Pin, / x -3/ BH Flatwasher, 9 Flatwasher, 3/ Latch Rear Shield 7 09BH Carriage Bolt, 3/8 x Gr Front Shield, R.H Front Shield, L.H Carriage Bolt, / x -/ Gr Flatwasher, / 806 Lockwasher, / 8600 Hex Nut, / Bushing, Axle Pivot Capscrew, 7/8 x Gr. 8 Lockwasher, 7/ Hex Nut, 7/8 7 9BH Grease Fitting Weldment, Pan Blade, 6.0 CW, Parallel Uplift Blade Bolt Kit Blade Bolt, 7/8 Ø x 3 Lg Washer, 7/8 Structural-Plain Locknut, Top, 7/8 NF Flatwasher, x x Hardened Cotter Pin, M x Nut, Castle M x.0 0--

12 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 SMV SIGN & RELATED PARTS 6 7 3, 0077 SMV Bracket Weldment 386 SMV Spade Bracket SMV Sign 093 Capscrew, / x -/ Gr. Locknut, / Capscrew, / x 3/ Gr Locknut, / Gr C 0--6

13 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 LED LIGHT KIT (REAR LIGHTS ONLY) LEFT SIDE RIGHT SIDE WIRING HARNESSES Module, Enhance 0077 Main Harness (7 Pin, 6 Long) Wishbone Harness, LH (8 Long) 0077 Wishbone Harness, RH (8 Long) Dual LED Ag Lamp, Left Side, Amber/Red Dual LED Ag Lamp, Right Side, Red/Amber Lens, Red Replacement Lens, Amber Replacement Cover, Black Replacement Lens Slt Pn Hd Mach Screw, #0 x Flatwasher, #0 3 0BH Locknut, #0 3 86BH Capscrew, / x Gr. 8 98BH Flatwasher, / Locknut, / Gr. C Clamp 0--

14 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 FRONT AND REAR SINGLE ROW HIGHWAY CHAINS 7, 8, 9, 0 6, 8, 9, 0 6, 8, 9, 0 7, 8, 9, 0 6, 8, 9, 0 7, 8, 9, 0 3 6, 8, 9, 0 6, 8, 9, 0 See Wing Assemblies For Shields Rear Center Chain Assy 007 Rear Chain Bracket, Center 007 Chain Rod, Center Rear 0076 Chain, Plated - Link Front, Side Chain Assy 0077 Front, Side Chain Bracket 0077 Chain Rod Side 0076 Chain, Plated - Link Front, Center Chain Assy 0079 Front, Center Chain Bracket 0079 Chain Rod, Front Center 0076 Chain, Plated - Link Wing, Front Chain Assy 007 Wing, Front Chain Bracket 0076 Chain Rod, Wing Front 0076 Chain, Plated - Link Wing Axle Chain Assy 0073 Axle Chain Bracket Chain Rod, Wing Axle 0089 Chain, Plated - Link 6 66 Carriage Bolt, / x -/ Gr Carriage Bolt, / x -/ Gr Flatwasher, / Lockwasher, / Hex Nut, /

15 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 FRONT AND REAR DOUBLE ROW HIGHWAY CHAINS 7, 8, 9, 0 6, 8, 9, 0 6, 8, 9, 0 7, 8, 9, 0 6, 8, 9, 0 7, 8, 9, 0 3 6, 8, 9, 0 6, 8, 9, 0 See Wing Assemblies For Shields 0078 Rear Center Chain Assy 007 Rear Chain Bracket, Center 007 Chain Rod, Center Rear Chain, Plated - 9 Link Front, Side Chain Assy 0077 Front, Side Chain Bracket 0077 Chain Rod Side Chain, Plated - 9 Link Front, Center Chain Assy 0079 Front, Center Chain Bracket 0079 Chain Rod, Front Center Chain, Plated - 9 Link Wing, Front Chain Assy 007 Wing, Front Chain Bracket 0076 Chain Rod, Wing Front Chain, Plated - 9 Link Wing Axle Chain Assy 0073 Axle Chain Bracket Chain Rod, Wing Axle 007 Chain, Plated - 7 Link 6 66 Carriage Bolt, / x -/ Gr Carriage Bolt, / x -/ Gr Flatwasher, / Lockwasher, / Hex Nut, /

16 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 CENTER SHIELD ASSEMBLY Mount, Shield Support Wldmt, Rear Shield Center Shield w/decals Decal, Warranty 93 Decal, Important Decal, Important Decal, Model Input Shield, Top Center Shield Bott. w/decals 0 D6 Decal, Danger (Guard Missing) 6939 Lynch Pin U-Bolt, Foot Platform Tube, Owner s Manual Cap, Manual Holder Seal, Manual Cap Capscrew, /6 x 3/ Gr Locknut, /6 Gr. C Hex Nut, 3/ Locknut, 3/8 Gr. C Capscrew, 3/8 x Gr. 830 Flatwasher, 3/8 SAE 3BH Capscrew, M8 x. x 0 Gr Flatwasher, M8 8 3BH Lockwasher M Capscrew, / x -/ Gr Flatwasher, / 7 Locknut, / Decal, Made In USA 0--

17 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 WING DRIVELINE SHIELDING Shield, Black Gearbox Ring, Gearbox Shield Inner Support 3 Capscrew, M8 x. x Gr Flatwasher, M8 3BH Lockwasher, M8 0--

19 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, TRANSFER GEARBOX ASSEMBLY 0 RPM, Ratio :. Mfd. by Comer 9 *7 8 0,,, 6, ,, 3, 3 8,, ,, 6, 7 0 8,, ,, 3, 700 Gearbox Assy (0 RPM) 70 Shaft, -3/ Z Oil Seal Plug, 3/8 GAS 70 Snap Ring 706 Bearing 6 70BH Pinion, Z Bearing, Shim, 79.9 x 69.0 x Casing Snap Ring Oil Seal, x 8 x Shim, 8.7 x 70.3 x Bearing, Shaft, -3/ Z Snap Ring Gear, Z * Vent Plug Spring Washer BH Capscrew, M8 x. x 30 G Cover 700 Snap Ring 7070 Shim, 79.9 x 69.0 x Shim, 79.9 x 69.0 x. 708 Shim, 79.9 x 69.0 x Shim, 8.7 x 70.3 x Shim, 8.7 x 70.3 x Shim, 8.7 x 70.3 x.0 *Item 7 is not part of Gearbox Assembly and must be ordered seperately 0-3-

20 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 GEARBOX ASSEMBLY 0 RPM CENTER DECK, L.H. & R.H. WING REF. NO. PART NO. DESCRIPTION QTY Gearbox Assembly Housing Cap, Top Shaft, Input Seal, Oil 3 x 7 x Cap, Oil 7 x C8 Capscrew M0-. x 6 Gr Plug, Vent Plug, Hex Socket Hd, M Shaft, Output Nut, Castle M x Washer, Hardened M x x Shim Kit, Input Shim Kit, Output Gear Kit (6t & 7T Gears) 73 Bearing, Ball (3 x 7 x 7) Ring, Snap 7 x 7 x Bearing, Roller (3 x 7 x 8.) Nut, Castle M0 x Bearing, Roller (30 x 7 x 0.7) Bearing, Roller (0 x 80 x 9.7) 0073 Snap Ring Seal, 0 x 80 x Shield, Protective 7087 Cotter Pin, M x Cotter Pin, M x Dipstick, Oil Seal Washer 0-3-

21 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, Center Driveshaft -3/ 0 Spline, -3/8-6 Spline Manufactured by Bondioli & Pavesi Driveshaft Assembly Yoke, Slide Lock #, -3/8, 6 Spline Cross Kit S 7 x 7.6 Zerk In Yoke, # -3/8, 6 Spline 7877 Roll Pin, M8 x Shaft, Spline - 0MM Lg Ass y, Friction Clutch, -3/, 0 Spline Taper Pin, 6 x 6 x M Flange Yoke #-S-G Bushing FF/FT/FV/FR Clutch Lining, x 77 x 3. FD/ - FT-FV3/ Hub, FT3--3/Z0 P.ECC Inner Plate, Ø70 x FT Belleville Spring, x 9 x.00 H= Clutch Inner, Plate, 78 x 96 x 6 H

22 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, WING DRIVESHAFT -3/ - 0 Spline/-3/8 6 Spline Manufactured by Bondioli & Pavesi ASAE SIZE 0--

23 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL May, WING DRIVESHAFT -3/ - 0 Spline/-3/8 6 Spline Manufactured by Bondioli & Pavesi ASAE SIZE Driveline Assembly Ass y Friction Clutch, -3/, 0 Spline 669 Cross & Bearing Yoke, Outer Tube # 7877 Roll Pin, M8 x Roll Pin, M8 x Yoke, Inner Tube # Yoke, Slide Lock #, -3/8, 6 Spline Decal, Danger - Guard Missing Decal, Rotating Driveline Taper Pin, 6 x 6 x M 0066 Ball Collar Kit #//6/7, -3/ Flange Yoke #/S FFV Collar 003 Lining, x 77 x 3. FD/ - FT-FV3/ Hub, FT3, -3/ Z0 P. ECC Inner Plate, Ø70 x FT Belleville Spring, x 9 x.00, H= Clutch Inner, Plate 78 x 96 x 6 H Shield, Driveline - Complete 0--3

BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 0078796 C.V.

24 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, C.V. DRIVESHAFT 0 RPM, ASAE SIZE MANUFACTURED BY WEASLER QTY. NO. NO. DESCRIPTION REQ D Driveshaft Assembly, C.V. 0 RPM Shield Auto-Lok Repair Kit WWCV Auto-Lok Yoke Assembly Cross and Bearing Kit Center Housing Yoke And Shaft Outer Guard Guard Repair Kit Decal, Danger Decal, Danger Inner Guard Yoke, Tube And Slip Sleeve Cross Bearing Kit Implement Yoke Assy. 98BH Locknut, /8 Flanged 30BH Capscrew, /8 X 3. Gr Ass y, Shield Guard Set- Complete 0--

25 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 TONGUE, LEVELING ROD & RELATED PARTS Weldment, Tongue Pivot Bushing, Tongue Capscrew, x Gr Locknut, Gr. C Leveling Rod Assy Leveling Rod Clevis Assy, RH Clevis Assy, LH 9 6 Jam Nut, Flatwasher, SAE Pin, Swivel Link 006 Cotter Pin, 3/6 x -/ 3 9BH Grease Fitting 3 D8 Jackstand Assy D767 Decal, Warning - Jack Cap Rod, Hose Holder 7 00BH Capscrew, / x Gr Flatwasher, / 9 Locknut, / Safety Tow Chain 0--

26 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 3 DRIVELINE HOLDER ASSEMBLY 0070 Mounting Bracket Weld. 007 Formed Driveline Holder Tie-Down Strap 093 Capscrew, /8 x Flatwasher, /8 SAE Lockwasher, / Hex Nut, / CLEVIS HITCH ASSEMBLY Clevis Pin 8867 Hitch Clevis Machined Collar 008 Capscrew, /8 x -/ 98BH Locknut, /8 6 68BH Capscrew, /8 x 3-3/ 7 007SP Clevis Hitch Assembly 6 0--

27 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 AXLE ARMS & RELATED PARTS Axle Weldment, Center Wing Axle Weldment, R.H Wing Axle Weldment, L.H Bushing, Axle Pivot Axle Pin 6 0 Capscrew, 3/8 x -/ Gr Locknut, 3/8 8 9 Pin, Dia Cotter Pin, 3/6 x -/ Turnbuckle Assembly 0069 Jam Nut Lockwasher, -/8 Nord 3 9BH Grease Fitting 9087 Capscrew, x Gr Locknut, Gr. C Capscrew, 7/8 x Lockwasher, 7/ Hex Nut, 7/

28 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 AXLES & RELATED PARTS SINGLE & DUAL SPINDLE Weldment, Tube 0779 Capscrew, / x 3-/ Gr Lockwasher, / Locknut, / Hub & Spindle Assy, Long (Center Axle) Hub & Spindle Assy, Short (Wing Axle) Spindle, Long Spindle, Short Wheel Hub Casting w/studs, Cups & Grease Fitting Stud Bolt, / -0 UNF Bearing Cup, Inside LM Bearing Cup, Outside Grease Fitting, /8 MP Straight Dust Cap Seal Kit Wheel Nut, / -0 UNF Bearing Adjustment Nut, - UNS Washer, Cotter Pin, /3 x -/ Lg Bearing Cone, Outside Bearing Cone, Inside LM Hub Cap Retainer Puck, Rubber Suspension Capscrew, / x 3-3/ Gr. 96 Flatwasher, / 0--

BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 WHEEL AND TIRE ASSEMBLIES 9SP SOLID TIRE ASSEMBLY 9SP Solid Tire Assembly 0070SP FOAM FILLED

29 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, 0 WHEEL AND TIRE ASSEMBLIES 9SP SOLID TIRE ASSEMBLY 9SP Solid Tire Assembly 0070SP FOAM FILLED AIRPLANE TIRE ASSY. 0. x SP Foam Filled Tire Assembly 0. x SP AIR FILLED AIRPLANE TIRE ASSY. 0. x SP Air Filled Tire Assembly 0. x

31 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, AXLE CYL NDER HYDRAULICS WHEN PLUMBING TO TRACTOR REMOTES Wing Lift Cylinder 996 Axle Control Cylinder 3 339BH Hydraulic Hose Assy., 7" Hydraulic Hose Assy., 6" 630 Hydraulic Hose Assy., Restrictor,.078 Orifice Breather Plug Elbow, 90 Deg BH Adaptor, 9/6 JIC to 3/ SAE Adaptor, 9/6 JIC to / NPT Swivel Nut, Tee Run 63 Stop Kit 3 9 Pin, Dia Cotter Pin, 3/6 x -/

32 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, HYDRAULIC HOSE OPTION KIT BH Tee Hydraulic Hose Assy., 6" Adaptor, 9/6 JIC to / NPT 330BH Adaptor, 9/6 JIC to 3/ SAE 0-6-

33 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, AXLE HYDRAULIC CYLINDER 3. Bore X 8 Stroke. Rod Diameter 3/ 6 ORB Ports Manufactured by Monarch 8 7 Cylinder Assembly Part Number Stamped Here Assembly, Hydraulic Cylinder 99 Clevis Cap 930 Rod Cap Piston 93 Rod. Dia. 96 Cylinder Tube 6 97 Tie Rod 7 9 Pin, Dia Cotter Pin, 3/6 x -/ Thread Lock 0 98 Rod Clevis,. x 9 Set Screw, 3/8 x / Knurled 90 Hex Nut, /8 UNF Hex Nut, - 93 Plug, 3/ 0007 Decal, Caution Seal Kit 0-7-

34 BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL September, HYDRAULIC CYLINDER - WING LIFT Manufactured By BAILEY Item Part No. Description Qty Assembly, Hydraulic Cylinder Clevis Cap Rod Cap Piston Rod,. Dia Cylinder Tube Tie Rod Pin, Dia Cotter Pin, 3/6 x -/ Rod Clevis Set Screw Hex Nut Hex Nut Plug, 3/ Seal Kit 0-7-

36 0 GRIFFIN AVE. SELMA, AL (33) (33) PARTS ORDERING FAX

PARTS MANUAL 3510, 3510-O, SECTION ROTARY MOWER

PARTS MANUAL 3510, 3510-O, SECTION ROTARY MOWER , -O, ROTARY MOWER Published 0/ S MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must be maintained