00-33A-01 CS-330T, CS-360T 1
|
|
- Oscar Whitehead
- 5 years ago
- Views:
Transcription
1 00-33A-01 CS-330T, CS-360T 1 0 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications, illustrations and directions in this SERVICE DATA are based on the latest products information available at the time of publication. CONTENTS page 1 SERVICE INFORMATION Specification Technical data Torque limits Special repairing materials Service limits Service tool EMISSION ADJUSTMENT GUIDE General adjusting rules Presetting idle adjust screw, L mixture needle and H mixture needle Adjusting carburetor... 8 Reference No A-01 ISSUED:
2 2 SERVICE INFORMATION CS-360T 1 SERVICE INFORMATION 1-1 Specifications Model CS-330T CS-360T Dimensions Length* mm(in) 277 (10.9) Width mm(in) 247 (9.7) Height mm(in) 214 (8.4) Dry weight* kg(lb) 3.6 (7.9) Engine Type KIORITZ, air-cooled, two-stroke, single cylinder Rotation Clockwise as viewed from the output end Displacement cm 3 (in 3 ) 32.6 (1.989) 36.3(2.215) Bore mm(in) 36.0 (1.417) 38.0 (1.496) Stroke mm(in) 32.0 (1.260) 32.0 (1.260) Compression ratio 7.5 Carburetor Type Diaphragm horizontal-draft with auto-return choke Model Walbro WT-739 Walbro WT-728 Venturi size-throttle bore mm(in) ( ) Ignition Type CDI (Capacitor discharge ignition) system with electronic timing advancer and speed governor Spark plug BPM8Y Starter Type Automatic rewind Rope diameter x length mm(in) 3.0 x 920 (0.12 x 36.2) Fuel Type Premixed two-stroke fuel Mixture ratio 50 : 1 (2 %) Gasoline Minimum 89 octane gasoline Two-stroke air cooled engine oil ISO-L-EGD (ISO/CD13738), JASO FC Tank capacity L (U.S.fl.oz.) 0.31 (10.5) Clutch Type Centrifugal, 3-shoe slide with 3-tension spring Guide bar / Saw chain lubrication type Automatic with volume adjuster Oil Tank capacity L (U.S.fl.oz.) 0.29 (9.8) Sprocket Type Spur Number of teeth 6 Pitch in 3/8 * Without guide bar and saw chain. Cutting devices Guide bar Part No Called length in Gauge in Saw chain Type OREGON 91VG Number of drive links Pitch in Low profile 3/8 Gauge in 0.050
3 CS-360T SERVICE INFORMATION Technical data Model CS-330T CS-360T Engine Idling speed rpm Wide open throttle speed* rpm Clutch engagement speed rpm Compression pressure MPa (kgf/cm 2 ) (psi) 0.98 (10.0) (142) 0.97 (9.8) (140) Ignition system Spark plug gap mm(in) ( ) Minimum secondary voltage at 1000 rpm kv 15 Secondary coil resistance kω Pole shoe air gaps mm (in) ( ) Ignition timing at 1000 rpm BTDC 25 at 3000 rpm BTDC 3 at 8000 rpm BTDC 32 at rpm BTDC 15 Carburetor Idle adjust screw initial setting turns in** 3 Test Pressure, minimum MPa (kgf/cm 2 ) (psi) 0.05 (0.5) (7.0) Metering lever height mm(in) 1.65 (0.06) lower than diaphragm seat Chain oil discharge volume at 7000 rpm Adjustable : ( ) ml/min(u.s.fl.oz./min) (Factory set 7 ml/min) BTDC: Before top dead center. *CS-330T: With 14 in. guide bar and saw chain. CS-360T: With 16 in. guide bar and saw chain. **Set idle adjust screw to contact throttle plate before initial setting.
4 4 SERVICE INFORMATION CS-360T 1-3 Torque limits Descriptions Size kgf cm N m in lbf Starter Starter pawl M 5* system Starter case M Ignition Magneto rotor (Flywheel) M system Ignition coil M 5* Spark plug M Fuel Carburetor M system Intake bellows M Clutch Clutch hub LM Engine Crankcase M Engine mount M Dust cover M 4** Muffler M Muffler cover M 4** Others Auto-oiler M Front handle M Top handle M 4** Top handle assembly M 4** Brake lever (Hand guard) M Chain catcher M 4** Guide bar stud M 6* Guide bar M Regular bolt, nut, M and screw M M M LM: Left-hand thread *Apply thread locking sealant (See below) ** Tapping screw 1-4 Special repairing materials Material Location Remarks Adhesive Ball bearing outer / crankcase Guide bar stud Loctite #675 or equivalent Muffler stud Liquid gasket Crankcase seams Loctite #515 or equivalent Thread locking sealant Starter pawl screws Loctite #242, ThreeBond #1324 or equivalent Ignition coil Loctite #222, ThreeBond #1342 or equivalent Grease Auto-oiler worm Clutch needle bearing Handle cushions Rewind spring Starter center shaft Chain brake (metal contact part) Lithium based grease Molybdenum grease (approx. 1 gram)
5 CS-360T 1-5 Service Limits SERVICE INFORMATION 5 A B C D 5K269 5K270 5K271 5K272 E F G H 5K273 5K016 5K042 5K274 K L M P N 5K173 5K174 5K190 5K Description CS-330T CS-360T A Cylinder bore When plating is worn and aluminum can be seen B Piston outer diameter Min (1.414) (1.491) C Piston pin bore Max (0.3163) (0.3163) D Piston ring groove Max. 1.6 (0.063) 1.6 (0.063) E Piston ring side clearance Max. 0.1 (0.004) 0.1 (0.004) F Piston pin outer diameter Min (0.3142) (0.3142) G Piston ring width Min (0.057) 1.45 (0.057) H Piston ring end gap Max. 0.5 (0.02) 0.5 (0.02) K Con-rod small end bore Max (0.4341) (0.4341) L Crankshaft runout Max (0.002) 0.05 (0.002) M Sprocket bore Max (0.504) (0.504) N Clutch drum bore Max (2.42) 61.5 (2.42) P Sprocket wear limit Max. 0.5 (0.02) 0.5 (0.02)
6 6 SERVICE INFORMATION CS-360T
01-36D-02 CS INTRODUCTION. Reference No D-02 ISSUED:
01-36D-02 CS-370 1 0 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications,
More informationSERVICE DATA. CS-310 (Serial number : ) (Serial number : ) CHAIN SAW 01-30A-00 CS CONTENTS INTRODUCTION
01-30A-00 CS-310 1 0 SERVICE DATA CHAIN SAW CS-310 (Serial number : 11000001-11999999) (Serial number : 12000001-12999999) INTRODUCTION We are constantly working on technical improvement of our products.
More informationSERVICE MANUAL SUPPLEMENT
01-34C-00 CS-352 1 0 SERVICE MANUAL SUPPLEMENT CHAIN SAW ECHO: CS-352 (Serial number : 11000001-11999999) (Serial number : 12000001-12999999) (Serial number : 13000001-13999999) INTRODUCTION We are constantly
More information00-36A-04 CS-350T, CS-350TES, CS-350WES 1
00-36A-04,, 1 0 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications,
More informationSERVICE DATA CHAIN SAW CS-450. (Serial number : and after) CONTENTS INTRODUCTION. Reference No B-01 REVISED: ISSUED:
01-45B-01 1 0 SERVICE DATA CHAIN SAW (Serial number : 36000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and
More information10-25J-00 SRM-261T 1 INTRODUCTION. Reference No J-00 ISSUED:
10-25J-00 SRM-261T 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications
More informationSERVICE DATA CHAIN SAW ECHO: CS-352ES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION
01-34D-01 1 0 SERVICE DATA CHAIN SAW ECHO: STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data,
More informationSERVICE DATA CHAIN SAW ECHO: CS-280WES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION. Reference No B-00 ISSUED:
00-27B-00 1 0 SERVICE DATA CHAIN SAW ECHO: STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data,
More information80-52A-00 EA Reference No A-00 ISSUED:
80-52A-00 EA-500 1 lntroduction We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications,
More informationSERVICE DATA CHAIN SAW ECHO: CS-500ES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION
01-50D-01 1 0 SERVICE DATA CHAIN SAW ECHO: STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data,
More informationSERVICE DATA TRIMMER/BRUSHCUTTER KIORITZ CORPORATION F-00 SRM-260 SRM-261 Series 1
10-25F-00 SRM-260 SRM-261 Series 1 1 SERVICE DATA TRIMMER/BRUSHCUTTER SRM-260 (Serial number : 05001001~05999999) SRM-260S (Serial number : 05001001~05999999) SRM-260U (Serial number : 05001001~05999999)
More informationSERVICE MANUAL SUPPLEMENT
21-63H-01 PB-770H, PB-770T 1 SERVICE MANUAL SUPPLEMENT 2 ECHO: PB-770H ECHO: PB-770T INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment
More informationSERVICE DATA. SRM-230U (Serial number : ~ ) SRM-231U (Serial number : ~ ) TRIMMER/BRUSHCUTTER KIORITZ CORPORATION
10-22E-00 SRM-230 SRM-231 Series 1 1 SERVICE DATA TRIMMER/BRUSHCUTTER SRM-230 (Serial number : 05001001~05999999) SRM-230S (Serial number : 05001001~05999999) SRM-230U (Serial number : 05001001~05999999)
More informationINDEX INTRODUCTION. Reference No L-01 REVISED:
12-21L-01 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications
More informationINTRODUCTION. Reference No S-01 REVISED:
10-21S-01 GT-225, SRM-225 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
More information21-21H-00 PB-2100,PB-2155,PB-2200SI 1
21-21H-00 PB-2100,,PB-2200SI 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
More informationSERVICE DATA PPF-2100 PPT-2100 PPT-2400 PPFD-2400 POWER PRUNER 17-21C-00 INDEX. with new gear case INTRODUCTION CONTENTS
17-21C-00 1 1 SERVICE DATA POWER PRUNER with new gear case INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject
More informationSERVICE DATA POWER PRUNER ECHO: PPF-300ES ECHO: PPT-300ES. (Serial number : and after) CONTENTS INTRODUCTION
17-28A-00, 1 1 SERVICE DATA We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications
More informationSERVICE DATA GT-220ES SRM-220ES TRIMMER/BRUSHCUTTER. (Serial nember : and after) (Serial nember : and after) INDEX INTRODUCTION
10-21P-02, 1 1 SERVICE DATA TRIMMER/BRUSHCUTTER INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change
More information21-25F-00 PB-251, PB-255ES, ES-255ES 1
21-25F-00 PB-251,, ES-255ES 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.
More informationSERVICE DATA TRIMMER/BRUSHCUTTER ECHO: SRM-236ES STAGE MODEL. (Serial number : and after) INTRODUCTION CONTENTS
10-21V-00 SRM-236ES 1 * 1 SERVICE DATA TRIMMER/BRUSHCUTTER ECHO: SRM-236ES STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products.
More informationINTRODUCTION. Reference No L-01 R E V I SED :
10-25L-01 SRM-265ES 1 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All
More informationCHAINSAW PARTS CATALOG. CS-4400 Type 1E: & UP. ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Illinois MODEL: SERIAL NUMBERS. 43.
AVAILABLE ATTACHMENTS & ACCESSORIES 0 CHAIN - " 0 CHAIN - " 0 CHAIN - " 00 BAR - " 0 BAR - " 00 BAR - " 00 FIXED NOSE CASE PARTS CATALOG CHAINSAW.cc MODEL: SERIAL NUMBERS CS-00 Type E: 0 & UP ECHO, INCORPORATED
More informationCHAIN SAW PARTS CATALOG MODEL CS-6700 TYPE 1E SERIAL NUMBER & UP
CHAIN SAW PARTS CATALOG MODEL CS-00 TYPE 1E SERIAL NUMBER 0001 & UP ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, IL 004 999203008 0/03 CS-00 TYPE 1E ENGINE, CRANKCASE, CYLINDER, PISTON 20 1 2 38 39
More informationCHAINSAW PARTS CATALOG CS-346: ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Illinois MODEL: SERIAL NUMBERS. 33.
AVAILABLE ATTACHMENTS & ACCESSORIES 0 CHAIN - " 0 CHAIN - " 0 CHAIN - " 00 GUIDE BAR - " 00 GUIDE BAR - " 00 GUIDE BAR - " 0 GUIDE BAR - " INTENZ 0 GUIDE BAR - " INTENZ 0 GUIDE BAR - " INTENZ 000 REMOVABLE
More informationDrawing A Crankcase 041 AV SCS
Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 1110 020 2105 1 Crankcase 2-5, 9, 10, 12 2 9371 470 3120 2 Cylindrical pin 6x20 3 9048 216 1010 8 Pan head screw M5x18
More informationPARTS CATALOG CHAIN SAW CS-3050(STD) CS-3050(STD)
PARTS CATALOG CHAIN SAW 1. Cylinder, Crankcase, Piston 1 100202-39131 1 CRANKCASE SET 2 + 900238-05025 4 SCREW 5*25 5*25 3 P021-007232 1 CRANKSHAFT ASY 4 + 437063-38330 1 GEAR, WORM 5 + 94035-36201 2 BEARING
More informationSuper 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber
Super 1050 Chain Saw UT-10139 Page 1 of 16 Carburetor Chamber Super 1050 Chain Saw UT-10139 Page 2 of 16 Carburetor Chamber 1 58319A 1 RING- Retaining 2 592301 1 COVER- Air filter 3 A70326 1 NUT- Cover
More informationK&T Saw Shop or
11-600166-00 TITAN 560 05/94 tp 05/96 IPL 211531 Page 1 of 19 Bar And Chain Information www.ktoutdoor.com 11-600166-00 TITAN 560 05/94 tp 05/96 IPL 211531 Page 2 of 19 Bar And Chain Information 225116-01
More informationPrinted from MediaCat
Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1106 020 2506 1 Crankcase (2) 2-11 2 0000 988 5217 1 Connector (2) 3 0000 988 5200 2 Connector (2) 4 1106 641
More informationSuper XL 925 Chain Saw UT Page 1 of 15 Carburetor Chamber
Super XL 925 Chain Saw UT-10415 Page 1 of 15 Carburetor Chamber Super XL 925 Chain Saw UT-10415 Page 2 of 15 Carburetor Chamber 1 63370A 1 RETAINER- Reed valve 2 63166A 4 VALVE- Reed 3 63371B 1 SEAT- Reed
More informationSuper EZ Chain Saw UT Page 1 of 18 Tools And Accessories
Super EZ Chain Saw UT-10440 Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 2 of 18 Tools And Accessories 24299 24299 ANVIL- Crankshaft installation 24304 24304 BIT- #2 pozidrive 24295
More informationrev 5_ EA4300F40B (Makita Teal) EA4300FR (Makita Red) PS-421 (Dolmar Red)
(Makita Teal) (Makita Red) (Dolmar Red) 1 Tank, Handle 1 79 10 11 9 19 8 13 12 14 20 18 3 7 6 5 2 4 18 19 20 16 24 18 19 17 22 22 23 18 21 19 20 21 23 2 1 Tank, Handle 1 1 195-114-650 TANK CPL. BLUE 1
More informationSuper EZ Chain Saw UT Page 1 of 19 Carburetor
Super EZ Chain Saw UT-10580 Page 1 of 19 Carburetor Super EZ Chain Saw UT-10580 Page 2 of 19 Carburetor 1 93203A 1 /P Repair Kit Includes items 1-16. 2 93203A 1 /P Repair Kit Includes items 1-16. 3 93203A
More information330 Chain Saw UT Page 1 of 17 Chain Brake and Chain Stop
330 Chain Saw UT-10609 Page 1 of 17 Chain Brake and Chain Stop 330 Chain Saw UT-10609 Page 2 of 17 Chain Brake and Chain Stop 1 80983 3 SCREW- (8-32 x 1/2) 2 70705 1 STOP- Chain 3 88048 1 SCREW- (10-24
More informationCHAIN SAWS G561AVS G621AVS
2626-93121 CHAIN SAWS G561AVS G621AVS APPLICABLE SERIAL NUMBERS: OCTOBER 1998 G561AVS 814608 and up G621AVS 820954 and up Fig.1 1 Fig.2 2 Fig.1 1 1 2616-12112 2618-12115 CYLINDER 1 K4 2 3356-12141 GROMMET
More informationG5200. Fig.1 POWER UNIT
CHAIN SAW 5200 Fig.1 POWER UNIT Fig.1 POWER UNIT Key# PART NUMBER DESCRIPTION NOTE 1 2880-12111 Cylinder 1 ø45 2 2880-14111 Inlet Pipe 1 3 2880-14120 Spring 5 2880-14150 Inner Guide 1 6 2670-14311 Bracket
More informationMcCULLOCH. Stroke. 30 mm (1.2 in.) 30 mm (1.2 in.) 30 mm (1.2 in.) 30 mm (1.2 in.)
SERVICE MANUAL Model Eager Beaver 2010, Mac 3210 Silver Eagle 2012 Eager Beaver 2014, Mac 3214, Silver Eagle 2014 Eager Beaver 2016, Mac 3216, Silver Eagle 2016 Bore Stroke DispL (2.1 cu. in.) (2.1CU.
More informationrev 1_09/20/2017 PS-35C EA3500SR
C 1 Tank, Handle 5 7 6 8 17 9 1 2 10 11 12 13 18 19 20 3 21 4 22 23 14 16 2 1 Tank, Handle 1 1 168507-3 TANK CAP COMPLETE 1 1 INC. 2 1 2 213080-9 O RING 29.5 1 1 1 3 163447-0 GASOLINE FILTER 1 1 1 4 195757-7
More informationPARTS CATALOG. CHAIN SAW CS-3500(6digits)(35)(36) CS-3500(6digits)(35)(36)
PARTS CATALOG CHAIN SAW 1. Cylinder, Crankcase, Piston 2 900238-05012 2 SCREW 5*12 5*12 3 130510-39930 1 ADAPTER, INTAKE 3 130510-39931 1 ADAPTER, INTAKE 3 130510-39932 1 ADAPTER, INTAKE 4 130016-39930
More informationENGINE MODEL SV-4B TYPE 1E PARTS CATALOG ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, ILLINOIS SERIAL NUMBERS: & UP
PARTS CATALOG ENGINE MODEL SV-B TYPE E SERIAL NUMBERS: 000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, ILLINOIS 00 WWW.ECHO-USA.COM 00 ECHO, Incorporated. All Rights Reserved 0 REVISED 0//0 SV-B
More informationPrinted from MediaCat
Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1117 020 2106 1 Crankcase 2-9 2 9022 341 1050 4 Spline screw IS-M5x25 3 0000 988 5211
More information290 Chain Saw UT A Page 1 of 14 Accessories & Tools
290 Chain Saw UT-10661-A Page 1 of 14 Accessories & Tools 290 Chain Saw UT-10661-A Page 2 of 14 Accessories & Tools Ref # Part Number Qty S/P/F Description 98293 1 BUMPER SPIKE 98488 1 ROTOR REMOVAL TOOL
More informationDrawing A Crankcase. Drawing A Crankcase
Drawing A Crankcase Drawing A Crankcase 1 1122 020 2101 1 Crankcase 2-18 2 9022 341 1300 2 Spline screw IS-M6x20 3 0000 988 5211 1 Connector 4 9371 470 2610 2 Cylindrical pin 5x18 5 0000 974 1200 1 Notched
More informationRepair Manual 11/99 PS-34. Page 1
Repair Manual /99 PS-4 Page Table of contents Index Technical Data page Special tools 4 Repair instructions, general 0 Chain brake 6 0 Centrifugal clutch 8 0 Oil pump 9-04 Ignition system - 0 Starting
More information300 Chain Saw UT Page 1 of 16 Accessories I
300 Chain Saw UT-10687 Page 1 of 16 Accessories I 300 Chain Saw UT-10687 Page 2 of 16 Accessories I Ref # Part Number Qty Description A-02177 A02177 1 BUMPER SPIKE KIT 9477299 9477299 1 RUBBER TUBING (10')
More informationSPARE PARTS LIST CHAIN SAWS GZ550
SPARE PARTS LIST CHAIN SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 501 69 17-01 COMBINATION WRENCH 1 CARBURETOR & AIR FILTER CARBURETOR & AIR FILTER Ref Part No Description Remark
More informationSXLAO Chain Saw UT Page 1 of 21 Carburetor Chamber
SXLAO Chain Saw UT-10045 Page 1 of 21 Carburetor Chamber SXLAO Chain Saw UT-10045 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 613GC Gas Concrete Saw Effective January 1, 2010 SERVICE ITEMS 613GC Gas Concrete Saw Above 71700 Gas Saw Service Tool Kit, includes all items shown above $668.00
More information245 Chain Saw UT Page 1 of 16 Air Filter & Handles & Oil Pump
245 Chain Saw UT-10631 Page 1 of 16 Air Filter & Handles & Oil Pump 245 Chain Saw UT-10631 Page 2 of 16 Air Filter & Handles & Oil Pump Ref # Part Number Qty Description 1 80870 1 SCREW- 10-32 x 3/8 2
More informationPrinted from MediaCat
Illustration A Crankcase, Cylinder Illustration A Crankcase, Cylinder Ref.Nr. Item code Quantity Description 1 1113 020 2107 1 Crankcase (1,2,4,5,7,8) 2-11 1 1113 020 2108 1 Crankcase (3,6) 2-11 2 1113
More informationPARTS LIST MCV31T CONTENTS
PARTS LIST MCV1T CONTENTS 1. ENGINE...1 ~ 2 2. OIL PUMP... ~ 4. CARBURETOR...5 ~ 4. ENGINE CASE... ~ 10 5. RECOIL STARTER...11 ~ 12. HANDLE...1 ~ 14 7. CHAIN CASE...15 ~ 1. LABEL, ACCESSORIES...17 ~ 1
More informationTRIMMER/BRUSH CUTTER PARTS CATALOG MODELS SRM-3800 TYPE 1
TRIMMER/BRUSH CUTTER PARTS CATALOG MODELS SRM-3800 TYPE 1 SERIAL NUMBER 0001 & UP MODELS SRM-3800 TYPE 1E SERIAL NUMBER 0001 & UP ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, IL 004 2224 0/ ENGINE,
More information240 Chain Saw UT Page 1 of 16 Air Cleaners & Handles & Oil Pump
240 Chain Saw UT-10627 Page 1 of 16 Air Cleaners & Handles & Oil Pump 240 Chain Saw UT-10627 Page 2 of 16 Air Cleaners & Handles & Oil Pump Ref # Part Number Qty Description 1 95036 1 ROD- Throttle 2 95222
More informationDrawing A Shortblock MS 250, MS 250 C 1 SCS
Drawing A Shortblock 1 Drawing A Shortblock Reference Item number Qty Description 1 1123 020 1209 1 Cylinder with piston Ø 42.5 mm (1,3-6) 4-8, 15 2 1123 020 1220 1 Cylinder with piston Ø 42.5 mm (2,6)
More informationIllustration Engine. PTX 2710 (EPA 3) Pole pruner. 3/27/2017 Page Copyright COMET USA, INC.
Documents Engine Starter assy and clutch Tank and air filter Adjustable telescopic pole Pruner Carburetor WT-1150 Accessories 3/27/2017 Page 1-16 Illustration Engine 3/27/2017 Page 2-16 Illustration Engine
More informationK&T Saw Shop or
14-600080 MINI MAC 6A 05/73 to 12/73 IPL 89090 Page 1 of 12 Accessories www.ktoutdoor.com 14-600080 MINI MAC 6A 05/73 to 12/73 IPL 89090 Page 2 of 12 Accessories 84992 Kit - Reed muffler 85933 Kit - Spark
More informationSPARE PARTS LIST. CHAIN SAWS 365SP from
SPARE PARTS LIST CHAIN SAWS 365SP from 2018-01- CHAIN BRAKE & CLUTCH COVER 365SP from 2018-01- CHAIN BRAKE & CLUTCH COVER 365SP from 2018-01- Ref Part No Description Remark QTY KIT 1 525 75 52-01 SCREW
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 680GC Petrol Concrete Saw Serial numbers starting with 967 & 977 Effective January 1, 2011 TABLE OF CONTENTS 680GC Petrol Concrete Saw ITEM DESCRIPTION KEY PAGE
More informationCS4018 Chain Saw UT R Page 1 of 14 Carburetor - Muffler
CS4018 Chain Saw UT-10736-R Page 1 of 14 Carburetor - Muffler CS4018 Chain Saw UT-10736-R Page 2 of 14 Carburetor - Muffler Ref # Part Number Qty Description 1 1 MUFFLER - Complete Not Used On This Model
More information1900E Page 1 of 24 Air Filter & Insulator
1900E Page 1 of 24 Air Filter & Insulator 1900E Page 2 of 24 Air Filter & Insulator Ref # Part Number Qty S/P/F Description 1 GM010176 1 SCREW, CHOKE COVER (25cc) GM010120 1 SCREW, CHOKE COVER (21cc) 2
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 613GC Gas Concrete Saw Effective January 1, 2011 TABLE OF CONTENTS 613GC Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 613GC Gas Saw Service Items n/a ii Starter
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 680GC Gas Concrete Saw Serial numbers starting with 967 & 977 Effective July 1, 2015 I TABLE OF CONTENTS 680GC Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 680GC
More informationPage 1 of 26 Air Filter and Insulator
2130 Page 1 of 26 Air Filter and Insulator 2130 Page 2 of 26 Air Filter and Insulator Ref # Part Number Qty S/P/F Description 1 GM010176 1 SCREW, CHOKE COVER (25cc) 1 GM010120 1 SCREW, CHOKE COVER (21cc)
More informationHOFFMANN POWER PRODUCTS PARTS LIST 2014
HOFFMANN POWER PRODUCTS PARTS LIST 2014 HOFFMANN CHAINSAW PN7200 ALL PARTS ARE SUBJECT TO STANDARD HOFFMANN TERMS AND CONDITIONS OF SALE 2010 Replacement parts are not manufactured, sold or warranted by
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 680GC Petrol Concrete Saw Serial numbers starting with 967 & 977 Effective January 1, 2013 I TABLE OF CONTENTS 680GC Petrol Concrete Saw ITEM DESCRIPTION KEY
More informationCHAIN SAW G415AVS NOTE
CHAIN SAW G415AVS : 1. Use KOMATSU ZENOAH genuine parts specified in the parts list for repair and/or replacement. 2. KOMATSU ZENOAH does not warrant the machines, those which have been damaged by the
More informationK&T Saw Shop or
11-600030 MAC 2-10PS 04/67 to 11/67 IPL 84288 Page 1 of 25 Accessories www.ktoutdoor.com 11-600030 MAC 2-10PS 04/67 to 11/67 IPL 84288 Page 2 of 25 Accessories 83434 Manual - Owner's 62827 Wrench - Screwdriver
More informationSmall Engine Parts. Super 2 Chain Saw UT Page 1 of 12 Engine Internals
Small Engine Parts Super 2 Chain Saw UT-10654 Page 1 of 12 Engine Internals Super 2 Chain Saw UT-10654 Page 2 of 12 Engine Internals Ref # Part Number Qty Description 1 A95072 1 CRANKCASE & CYLINDER ASSY.
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 680GC Gas Concrete Saw Serial numbers starting with 967 & 977 Effective January 1, 2019 I TABLE OF CONTENTS 680GC Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 680GC
More informationHEDGE CLIPPER MODEL HC-1600
PARTS CATALOG HEDGE CLIPPER MODEL HC-00 SERIAL NUMBER 0000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, IL 00 0 0/ HC-00 ENGINE, CRANKCASE, COVER 0 ENGINE, CRANKCASE, COVER KEY PART NUMBER QTY
More informationXL12 Chain Saw UT Page 1 of 21 Carburetor Chamber
XL12 Chain Saw UT-10080 Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More informationXL Chain Saw UT Page 1 of 12 Engine Internals
XL Chain Saw UT-10655 Page 1 of 12 Engine Internals XL Chain Saw UT-10655 Page 2 of 12 Engine Internals Ref # Part Number Qty S/P/F Description 1 A95071A 1 CRANKCASE & CYLINDER ASSY. 2 80571 3 /P SCREW-
More informationSPARE PARTS LIST. CHAIN SAWS 455 Rancher
SPARE PARTS LIST CHAIN SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 501 69 17-01 COMBINATION WRENCH 1 CARBURETOR & AIR FILTER CARBURETOR & AIR FILTER Ref Part No Description Remark
More informationK&T Saw Shop or
11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories www.ktoutdoor.com 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 2 of 19 Accessories 84453 Kit - Piston tool 69191 Kit - Pressure
More informationM MAC /77 to 02/83 IPL R2 Page 1 of 16 Tools & Accessories K&T Saw Shop or
11-600016M MAC 110 01/77 to 02/83 IPL 95807-R2 Page 1 of 16 Tools & Accessories 11-600016M MAC 110 01/77 to 02/83 IPL 95807-R2 Page 2 of 16 Tools & Accessories 95169 Kit - Spark Arrester 91485 Wrench -
More informationPrinted from MediaCat
Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1124 020 2116 1 Crankcase 2-15 2 0000 988 5215 1 Connector 3 9371 470 2610 2 Cylindrical pin 5x18 4 1120 162 5200
More informationK&T Saw Shop or
12-400060-06 TITAN 2030 12/94 to 09/96 IPL 211632 Page 1 of 11 Special Tools & Accessories www.ktoutdoor.com 12-400060-06 TITAN 2030 12/94 to 09/96 IPL 211632 Page 2 of 11 Special Tools & Accessories 222785
More informationSPARE PARTS LIST CHAIN SAWS CS2255
SPARE PARTS LIST CHAIN SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 501 69 17-01 COMBINATION WRENCH 1 CARBURETOR & AIR FILTER CARBURETOR & AIR FILTER Ref Part No Description Remark
More informationSPARE PARTS LIST CHAIN SAWS CS2252,
SPARE PARTS LIST CHAIN SAWS CS2252, 2012-07 ACCESSORIES CS2252, 2012-07 ACCESSORIES CS2252, 2012-07 Ref Part no. Description Remark Qty Kit 1 575 43 92-01 TOOL 1 2 522 52 11-01 COMBINATION WRENCH 1 1 3
More informationPrinted from MediaCat
Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1119 020 2118 1 Crankcase (1,3,5) 2-11 1 1119 020 2109 1 Crankcase (6,8,9) 2-11 1 1119 020 2119 1 Crankcase (2,4)
More informationK&T Saw Shop or
11-400060-02 TITAN 2100 08/92 to 10/92 IPL 211404 Page 1 of 12 Carburetor Assembly www.ktoutdoor.com 11-400060-02 TITAN 2100 08/92 to 10/92 IPL 211404 Page 2 of 12 Carburetor Assembly 1 224142-03 1 Carburetor
More informationPARTS LIST CHAIN SAW G415AVS
2869-93211 (709) (for Australia) PARTS LIST CHAIN SAW G415AVS : 1. Use ZENOAH genuine parts specified in the parts list for repair and/or replacement. 2. ZENOAH does not warrant the machines, those which
More informationSPARE PARTS LIST CHAIN SAWS 365 H,
SPARE PARTS LIST CHAIN SAWS 365 H, 2013-12 ACCESSORIES 365 H, 2013-12 ACCESSORIES 365 H, 2013-12 Ref Part no. Description Remark Qty Kit 1 503 55 85-03 TOOL KIT 1 2 501 69 17-01 COMBINATION WRENCH 1 1
More information613GC Key A Parts Starter & Ignition Assembly
613GC Key A Parts Starter & Ignition Assembly 73866 Screw (same as B26) A01 505514 Starter Rope Handle A02 73904 Starter Rope A03 73909 Starter Coil Spring & Housing A04 71451 Starter Case Plate A05 73910
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 0GC Gas Concrete Saw Effective January, 09 0 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject to change
More informationECS-330,330B CYLINDER/PISTON/CRANK SHAFT
ECS-330,330B CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty 001 157-11666-90 SPARK PLUG CAP ASS'Y 1 002 018-01805-20 SPARK PLUG CJ8 1 006 002-01730-20 CYLINDER 1 007 990-11050-161 SCREW
More informationSmall Engine Parts. 240 Chain Saw UT Page 1 of 14 Carburetor Chamber/Rear Handle
Small Engine Parts 240 Chain Saw UT-10629 Page 1 of 14 Carburetor Chamber/Rear Handle 240 Chain Saw UT-10629 Page 2 of 14 Carburetor Chamber/Rear Handle Ref # Part Number Qty Description 1 A03151 1 HANDGUARD
More informationSPARE PARTS LIST CHAIN SAWS 365SP,
SPARE PARTS LIST CHAIN SAWS 365SP, 2013-12 ACCESSORIES 365SP, 2013-12 ACCESSORIES 365SP, 2013-12 Ref Part no. Description Remark Qty Kit 1 503 55 85-01 TOOL 1 2 501 69 17-01 COMBINATION WRENCH 1 1 3 503
More informationG561AV/G561AVS G621AV/G621AVS
2622-93121 CHAIN SAWS G561AV/G561AVS G621AV/G621AVS APPLICABLE SERIAL NUMBERS: AUGUST 1997 G561AV / G561AVS 714103 and up G621AV / G621AVS 719739 and up Fig.1 1 Fig.2 2 Fig.1 Part Number Q'ty Key No. Description
More informationPARTS CATALOGUE CHAIN SAW CS-420ES(37) P Ib
PARTS CATALOGUE CHAIN SAW CS-420ES(37) P014-002700-12Ib 1 CYLINDER, PISTON, CRANKSHAFT 1 900238-05014 2 SCREW 5*14 2 A202-000060 1 BELLOWS, INTAKE 3 V103-000290 1 GASKET,INTAKE 4 P021-017360 1 CRANKCASE
More informationOnline version - not for reprint
(3) A Shortblock 0... B Shortblock 03, 03 L... 3 C Shortblock 0... 4 D Engine housing... D Engine housing... E Quick tensioner parts... F Oil pump... G Clutch... H Chain brake... J Muffler... K Ignition
More information3400 Gas Saw Page 1 of 25 Bow Guide & Chain Informatio
3400 Gas Saw Page 1 of 25 Bow Guide & Chain Informatio 44235 13".050/ 3/8 pitch, P760-80 Bow Guide 51293 13".050/ 3/8 pitch, P760-80 Chain 44236 14".050/ 3/8 pitch, P760-87 Bow Guide 51294 14".050/ 3/8
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 680GC Gas Concrete Saw Serial numbers starting with 967 & 977 Effective January 1, 2018 I TABLE OF CONTENTS 680GC Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 680GC
More informationMT 3750 (EPA 3) Chainsaw. Documents MT 3750 (EPA 3) Engine Epa3. Starter assy. Crankcase. Tank and handle. Clutch and brake. Carburetor WT-781E
Chainsaw Documents Engine Epa3 Starter assy Crankcase Tank and handle Clutch and brake Carburetor WT-781E Carburetor WT-780F 1/18/2017 Page 1-15 Illustration Engine Epa3 1/18/2017 Page 2-15 Illustration
More informationSPARE PARTS LIST CHAIN SAWS CS2258,
SPARE PARTS LIST CHAIN SAWS CS2258, 2012-05 ACCESSORIES CS2258, 2012-05 ACCESSORIES CS2258, 2012-05 Ref Part no. Description Remark Qty Kit 1 575 43 92-01 TOOL 1 2 522 52 11-01 COMBINATION WRENCH 1 1 3
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List RZ60/603GC Gas Concrete Saw Effective January 1, 2018 2017 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List RZ60/603GC Gas Concrete Saw Effective January 1, 2016 2016 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List RZ60/603GC Gas Concrete Saw Effective January 1, 2016 2016 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject
More informationPetrol chainsaw----p File: Version: 1.0 Ihr Ersatzteilspezialist im Internet
Petrol chainsaw----p File: Version: 1.0 Spare Parts list File: 0040100903BD Version: 1.0 Petrol chainsaw----pcs46b Pos. No Part code English QTY 1 905207 front handle assy 1 B350012 2 Hexagon lobular
More information