SERVICE MANUAL SUPPLEMENT

Size: px
Start display at page:

Download "SERVICE MANUAL SUPPLEMENT"

Transcription

1 01-34C-00 CS SERVICE MANUAL SUPPLEMENT CHAIN SAW ECHO: CS-352 (Serial number : ) (Serial number : ) (Serial number : ) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications and directions in this SERVICE DATA are based on the latest product information available at the time of publication. CONTENTS page 1 SERVICE INFORMATION Specification Technical data Torque limits Special repairing materials Service limits Special tools CARBURETOR ADJUSTMENT PROCEDURE General adjusting rules Presetting Idle adjust screw, L mixture needle and H mixture needle Adjusting carburetor... 9 Reference No C-00 ISSUED:

2 2 SERVICE INFORMATION CS SERVICE INFORMATION 1-1 Specifications Model CS-352 Dimensions Length* mm(in) 396 (15.59) Width mm(in) 232 (9.13) Height mm(in) 268 (10.55) Dry weight* kg(lb) 4.0 (8.8) Engine Type YAMABIKO, air-cooled, two-stroke, single cylinder Rotation Clockwise as viewed from the output end Displacement cm 3 (in 3 ) 34.0 (2.075) Bore mm(in) 38.0 (1.496) Stroke mm(in) 30.0 (1.181) Compression ratio 6.8 Carburetor Type Diaphragm horizontal-draft with auto-return choke Model Walbro WT-992 Venturi size-throttle bore mm(in) ( ) Ignition Type CDI (Capacitor discharge ignition) system Digital magneto Spark plug BPM8Y Starter Type Automatic rewind Rope diameter x length mm(in) 3.0 x 920 (0.12 x 36.2) Fuel Type Premixed two-stroke fuel Mixture ratio 50 : 1 (2 %) Gasoline Minimum 89 octane gasoline Two-stroke air cooled engine oil ISO-L-EGD (ISO/CD13738), JASO M345-FC/FD Tank capacity L (U.S.fl.oz.) 0.25 (8.5) Exhaust Muffler type Spark arrester muffler with catalyst Clutch Type Centrifugal, 3-shoe slide with 3-tension spring Guide bar / Saw chain lubrication type Pencil type Automatic oil pump Oil Tank capacity L (U.S.fl.oz.) 0.26 (8.8) Auto oiler Type Clutch related type Sprocket Type Spur Number of teeth 6 Pitch in 3/8 * Without guide bar and saw chain. Cutting devices Guide bar Part No. 12A0CD A0CD A0CD3757 Called length in Gauge in Saw chain Type OREGON 91VG / 91P Number of drive links Pitch in 3/8 Gauge in 0.050

3 CS-352 SERVICE INFORMATION Technical data Engine Idling s peed W ide open throttle s peed* R P M R P M 3, 000 +/ , , 200 C lutch enga gement s peed R P M 4, 200 Minimum RPM 3,800 Compression pressure MPa (kgf/cm 2 ) (psi) 0.94 (9.6) (136) Ignition system S pa rk plug ga p mm(in) ( ) Minimum secondary voltage at 1,500 RPM kv 15.0 Primary coil resistance (Red Probe on stop terminal of module) ko S econda ry coil res is ta nce ko P ole s hoe a ir ga ps mm (in) ( ) Ignition timing a t 3, 000 R P M B T DC 8 a t 8, 000 R P M B T DC 34 a t 10, 000 R P M B T DC 38 P E T-9000 P a ra meter P a ra meter P a ra meter 2 04 Carburetor Idle adjust screw initial setting turns in** 1 1/2 Test Pressure, minimum MPa (kgf/cm 2 ) (psi) 0.05 (0.5) (7.0) Metering lever height mm(in) (0. 06) lower tha n dia phra gm s ea t Chain oil discharge volume at 7,000 RPM ml/min(u.s. 0.oz./min) Fixed 7.8 ml/min BTDC: Before top dead center. * With 14 in. guide bar and properly adjusted saw chain. **Set idle adjust screw to the point that its tip contacts throttle plate before initial setting. If clutch engagement speed is lower than minimum RPM, replace clutch assembly with new one.

4 4 SERVICE INFORMATION CS Torque limits Descriptions Size kgf cm N m in lbf Starter system Ignition system Fuel system Starter case M Collar M Magneto rotor (Flywheel) M Ignition coil M 5* ON/OFF switch M Spark plug M Carburetor M M Clutch Clutch hub LM Engine Crankcase M 5* Engine mount M Muffler M Intake insulator M Others Front handle M Rear handle assembly M Brake lever M Brake cover M Compression spring M Sprocket guard M Guide bar M Regular bolt, nut and screw M M M M LM: Left-hand thread *Apply special repairing materials 1-4 Special repairing materials Material Location Remarks Adhesive Ball bearing outer / crankcase Stud bolt Loctite #675 or equivalent Liquid gasket Crankcase seams ThreeBond 1207D Thread locking sealant Starter pawl Loctite #242, ThreeBond #1324 or equivalent Ignition coil Loctite #222, ThreeBond #1342 or equivalent Grease Clutch needle bearing Lithium based greaseor ECHO XTended Starter center shaft Protection TM Lubricant Chain brake (metal contact part) Molybdenum grease (approx.1 gram)

5 CS-352 SERVICE INFORMATION Service Limits A B C D 5K177 5K083 5K084 5K081 E F G H 5K082 5K016 5K025 5K178 K L M P N 5K173 5K174 5K190 5K191 5K097 Description mm (in) A Cylinder bore When plating is worn and aluminum can be seen B Piston outer diameter Min (1.493) C Piston pin bore Max (0.3163) D Piston ring groove Max (0.063) E Piston ring side clearance Max (0.004) F Piston pin outer diameter Min (0.3142) G Piston ring width Min (0.057) H Piston ring end gap Max (0.02) K Con-rod small end bore Max (0.4724) L Crankshaft runout Max (0.001) M Sprocket bore Max (0.4252) N Clutch drum bore Max (2.42) P Sprocket wear limit Max (0.02)

6 6 SERVICE INFORMATION CS-352

00-33A-01 CS-330T, CS-360T 1

00-33A-01 CS-330T, CS-360T 1 00-33A-01 CS-330T, CS-360T 1 0 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.

More information

SERVICE DATA. CS-310 (Serial number : ) (Serial number : ) CHAIN SAW 01-30A-00 CS CONTENTS INTRODUCTION

SERVICE DATA. CS-310 (Serial number : ) (Serial number : ) CHAIN SAW 01-30A-00 CS CONTENTS INTRODUCTION 01-30A-00 CS-310 1 0 SERVICE DATA CHAIN SAW CS-310 (Serial number : 11000001-11999999) (Serial number : 12000001-12999999) INTRODUCTION We are constantly working on technical improvement of our products.

More information

01-36D-02 CS INTRODUCTION. Reference No D-02 ISSUED:

01-36D-02 CS INTRODUCTION. Reference No D-02 ISSUED: 01-36D-02 CS-370 1 0 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications,

More information

SERVICE DATA CHAIN SAW ECHO: CS-352ES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION

SERVICE DATA CHAIN SAW ECHO: CS-352ES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION 01-34D-01 1 0 SERVICE DATA CHAIN SAW ECHO: STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data,

More information

SERVICE DATA CHAIN SAW ECHO: CS-280WES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION. Reference No B-00 ISSUED:

SERVICE DATA CHAIN SAW ECHO: CS-280WES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION. Reference No B-00 ISSUED: 00-27B-00 1 0 SERVICE DATA CHAIN SAW ECHO: STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data,

More information

00-36A-04 CS-350T, CS-350TES, CS-350WES 1

00-36A-04 CS-350T, CS-350TES, CS-350WES 1 00-36A-04,, 1 0 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications,

More information

SERVICE MANUAL SUPPLEMENT

SERVICE MANUAL SUPPLEMENT 21-63H-01 PB-770H, PB-770T 1 SERVICE MANUAL SUPPLEMENT 2 ECHO: PB-770H ECHO: PB-770T INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment

More information

10-25J-00 SRM-261T 1 INTRODUCTION. Reference No J-00 ISSUED:

10-25J-00 SRM-261T 1 INTRODUCTION. Reference No J-00 ISSUED: 10-25J-00 SRM-261T 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications

More information

SERVICE DATA CHAIN SAW ECHO: CS-500ES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION

SERVICE DATA CHAIN SAW ECHO: CS-500ES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION 01-50D-01 1 0 SERVICE DATA CHAIN SAW ECHO: STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data,

More information

SERVICE DATA CHAIN SAW CS-450. (Serial number : and after) CONTENTS INTRODUCTION. Reference No B-01 REVISED: ISSUED:

SERVICE DATA CHAIN SAW CS-450. (Serial number : and after) CONTENTS INTRODUCTION. Reference No B-01 REVISED: ISSUED: 01-45B-01 1 0 SERVICE DATA CHAIN SAW (Serial number : 36000001 and after) INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and

More information

80-52A-00 EA Reference No A-00 ISSUED:

80-52A-00 EA Reference No A-00 ISSUED: 80-52A-00 EA-500 1 lntroduction We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications,

More information

SERVICE DATA TRIMMER/BRUSHCUTTER KIORITZ CORPORATION F-00 SRM-260 SRM-261 Series 1

SERVICE DATA TRIMMER/BRUSHCUTTER KIORITZ CORPORATION F-00 SRM-260 SRM-261 Series 1 10-25F-00 SRM-260 SRM-261 Series 1 1 SERVICE DATA TRIMMER/BRUSHCUTTER SRM-260 (Serial number : 05001001~05999999) SRM-260S (Serial number : 05001001~05999999) SRM-260U (Serial number : 05001001~05999999)

More information

SERVICE DATA. SRM-230U (Serial number : ~ ) SRM-231U (Serial number : ~ ) TRIMMER/BRUSHCUTTER KIORITZ CORPORATION

SERVICE DATA. SRM-230U (Serial number : ~ ) SRM-231U (Serial number : ~ ) TRIMMER/BRUSHCUTTER KIORITZ CORPORATION 10-22E-00 SRM-230 SRM-231 Series 1 1 SERVICE DATA TRIMMER/BRUSHCUTTER SRM-230 (Serial number : 05001001~05999999) SRM-230S (Serial number : 05001001~05999999) SRM-230U (Serial number : 05001001~05999999)

More information

SERVICE DATA POWER PRUNER ECHO: PPF-300ES ECHO: PPT-300ES. (Serial number : and after) CONTENTS INTRODUCTION

SERVICE DATA POWER PRUNER ECHO: PPF-300ES ECHO: PPT-300ES. (Serial number : and after) CONTENTS INTRODUCTION 17-28A-00, 1 1 SERVICE DATA We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications

More information

INTRODUCTION. Reference No S-01 REVISED:

INTRODUCTION. Reference No S-01 REVISED: 10-21S-01 GT-225, SRM-225 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.

More information

INDEX INTRODUCTION. Reference No L-01 REVISED:

INDEX INTRODUCTION. Reference No L-01 REVISED: 12-21L-01 1 1 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All specifications

More information

SERVICE DATA TRIMMER/BRUSHCUTTER ECHO: SRM-236ES STAGE MODEL. (Serial number : and after) INTRODUCTION CONTENTS

SERVICE DATA TRIMMER/BRUSHCUTTER ECHO: SRM-236ES STAGE MODEL. (Serial number : and after) INTRODUCTION CONTENTS 10-21V-00 SRM-236ES 1 * 1 SERVICE DATA TRIMMER/BRUSHCUTTER ECHO: SRM-236ES STAGE MODEL (Serial number : 37000001 and after) INTRODUCTION We are constantly working on technical improvement of our products.

More information

SERVICE DATA PPF-2100 PPT-2100 PPT-2400 PPFD-2400 POWER PRUNER 17-21C-00 INDEX. with new gear case INTRODUCTION CONTENTS

SERVICE DATA PPF-2100 PPT-2100 PPT-2400 PPFD-2400 POWER PRUNER 17-21C-00 INDEX. with new gear case INTRODUCTION CONTENTS 17-21C-00 1 1 SERVICE DATA POWER PRUNER with new gear case INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject

More information

21-21H-00 PB-2100,PB-2155,PB-2200SI 1

21-21H-00 PB-2100,PB-2155,PB-2200SI 1 21-21H-00 PB-2100,,PB-2200SI 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.

More information

SERVICE DATA GT-220ES SRM-220ES TRIMMER/BRUSHCUTTER. (Serial nember : and after) (Serial nember : and after) INDEX INTRODUCTION

SERVICE DATA GT-220ES SRM-220ES TRIMMER/BRUSHCUTTER. (Serial nember : and after) (Serial nember : and after) INDEX INTRODUCTION 10-21P-02, 1 1 SERVICE DATA TRIMMER/BRUSHCUTTER INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change

More information

21-25F-00 PB-251, PB-255ES, ES-255ES 1

21-25F-00 PB-251, PB-255ES, ES-255ES 1 21-25F-00 PB-251,, ES-255ES 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice.

More information

INTRODUCTION. Reference No L-01 R E V I SED :

INTRODUCTION. Reference No L-01 R E V I SED : 10-25L-01 SRM-265ES 1 1 2 INTRODUCTION We are constantly working on technical improvement of our products. For this reason, technical data, equipment and design are subject to change without notice. All

More information

CHAIN SAW PARTS CATALOG MODEL CS-6700 TYPE 1E SERIAL NUMBER & UP

CHAIN SAW PARTS CATALOG MODEL CS-6700 TYPE 1E SERIAL NUMBER & UP CHAIN SAW PARTS CATALOG MODEL CS-00 TYPE 1E SERIAL NUMBER 0001 & UP ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, IL 004 999203008 0/03 CS-00 TYPE 1E ENGINE, CRANKCASE, CYLINDER, PISTON 20 1 2 38 39

More information

CHAINSAW PARTS CATALOG. CS-4400 Type 1E: & UP. ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Illinois MODEL: SERIAL NUMBERS. 43.

CHAINSAW PARTS CATALOG. CS-4400 Type 1E: & UP. ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Illinois MODEL: SERIAL NUMBERS. 43. AVAILABLE ATTACHMENTS & ACCESSORIES 0 CHAIN - " 0 CHAIN - " 0 CHAIN - " 00 BAR - " 0 BAR - " 00 BAR - " 00 FIXED NOSE CASE PARTS CATALOG CHAINSAW.cc MODEL: SERIAL NUMBERS CS-00 Type E: 0 & UP ECHO, INCORPORATED

More information

CHAINSAW PARTS CATALOG CS-346: ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Illinois MODEL: SERIAL NUMBERS. 33.

CHAINSAW PARTS CATALOG CS-346: ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Illinois MODEL: SERIAL NUMBERS. 33. AVAILABLE ATTACHMENTS & ACCESSORIES 0 CHAIN - " 0 CHAIN - " 0 CHAIN - " 00 GUIDE BAR - " 00 GUIDE BAR - " 00 GUIDE BAR - " 0 GUIDE BAR - " INTENZ 0 GUIDE BAR - " INTENZ 0 GUIDE BAR - " INTENZ 000 REMOVABLE

More information

ENGINE MODEL SV-4B TYPE 1E PARTS CATALOG ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, ILLINOIS SERIAL NUMBERS: & UP

ENGINE MODEL SV-4B TYPE 1E PARTS CATALOG ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, ILLINOIS SERIAL NUMBERS: & UP PARTS CATALOG ENGINE MODEL SV-B TYPE E SERIAL NUMBERS: 000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, ILLINOIS 00 WWW.ECHO-USA.COM 00 ECHO, Incorporated. All Rights Reserved 0 REVISED 0//0 SV-B

More information

PARTS CATALOG CHAIN SAW CS-3050(STD) CS-3050(STD)

PARTS CATALOG CHAIN SAW CS-3050(STD) CS-3050(STD) PARTS CATALOG CHAIN SAW 1. Cylinder, Crankcase, Piston 1 100202-39131 1 CRANKCASE SET 2 + 900238-05025 4 SCREW 5*25 5*25 3 P021-007232 1 CRANKSHAFT ASY 4 + 437063-38330 1 GEAR, WORM 5 + 94035-36201 2 BEARING

More information

rev 5_ EA4300F40B (Makita Teal) EA4300FR (Makita Red) PS-421 (Dolmar Red)

rev 5_ EA4300F40B (Makita Teal) EA4300FR (Makita Red) PS-421 (Dolmar Red) (Makita Teal) (Makita Red) (Dolmar Red) 1 Tank, Handle 1 79 10 11 9 19 8 13 12 14 20 18 3 7 6 5 2 4 18 19 20 16 24 18 19 17 22 22 23 18 21 19 20 21 23 2 1 Tank, Handle 1 1 195-114-650 TANK CPL. BLUE 1

More information

rev 1_09/20/2017 PS-35C EA3500SR

rev 1_09/20/2017 PS-35C EA3500SR C 1 Tank, Handle 5 7 6 8 17 9 1 2 10 11 12 13 18 19 20 3 21 4 22 23 14 16 2 1 Tank, Handle 1 1 168507-3 TANK CAP COMPLETE 1 1 INC. 2 1 2 213080-9 O RING 29.5 1 1 1 3 163447-0 GASOLINE FILTER 1 1 1 4 195757-7

More information

Super EZ Chain Saw UT Page 1 of 18 Tools And Accessories

Super EZ Chain Saw UT Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 2 of 18 Tools And Accessories 24299 24299 ANVIL- Crankshaft installation 24304 24304 BIT- #2 pozidrive 24295

More information

Super EZ Chain Saw UT Page 1 of 19 Carburetor

Super EZ Chain Saw UT Page 1 of 19 Carburetor Super EZ Chain Saw UT-10580 Page 1 of 19 Carburetor Super EZ Chain Saw UT-10580 Page 2 of 19 Carburetor 1 93203A 1 /P Repair Kit Includes items 1-16. 2 93203A 1 /P Repair Kit Includes items 1-16. 3 93203A

More information

290 Chain Saw UT A Page 1 of 14 Accessories & Tools

290 Chain Saw UT A Page 1 of 14 Accessories & Tools 290 Chain Saw UT-10661-A Page 1 of 14 Accessories & Tools 290 Chain Saw UT-10661-A Page 2 of 14 Accessories & Tools Ref # Part Number Qty S/P/F Description 98293 1 BUMPER SPIKE 98488 1 ROTOR REMOVAL TOOL

More information

Super 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber

Super 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber Super 1050 Chain Saw UT-10139 Page 1 of 16 Carburetor Chamber Super 1050 Chain Saw UT-10139 Page 2 of 16 Carburetor Chamber 1 58319A 1 RING- Retaining 2 592301 1 COVER- Air filter 3 A70326 1 NUT- Cover

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 680GC Petrol Concrete Saw Serial numbers starting with 967 & 977 Effective January 1, 2011 TABLE OF CONTENTS 680GC Petrol Concrete Saw ITEM DESCRIPTION KEY PAGE

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 613GC Gas Concrete Saw Effective January 1, 2010 SERVICE ITEMS 613GC Gas Concrete Saw Above 71700 Gas Saw Service Tool Kit, includes all items shown above $668.00

More information

330 Chain Saw UT Page 1 of 17 Chain Brake and Chain Stop

330 Chain Saw UT Page 1 of 17 Chain Brake and Chain Stop 330 Chain Saw UT-10609 Page 1 of 17 Chain Brake and Chain Stop 330 Chain Saw UT-10609 Page 2 of 17 Chain Brake and Chain Stop 1 80983 3 SCREW- (8-32 x 1/2) 2 70705 1 STOP- Chain 3 88048 1 SCREW- (10-24

More information

Drawing A Crankcase 041 AV SCS

Drawing A Crankcase 041 AV SCS Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 1110 020 2105 1 Crankcase 2-5, 9, 10, 12 2 9371 470 3120 2 Cylindrical pin 6x20 3 9048 216 1010 8 Pan head screw M5x18

More information

K&T Saw Shop or

K&T Saw Shop or 11-600166-00 TITAN 560 05/94 tp 05/96 IPL 211531 Page 1 of 19 Bar And Chain Information www.ktoutdoor.com 11-600166-00 TITAN 560 05/94 tp 05/96 IPL 211531 Page 2 of 19 Bar And Chain Information 225116-01

More information

HEDGE CLIPPER MODEL HC-1600

HEDGE CLIPPER MODEL HC-1600 PARTS CATALOG HEDGE CLIPPER MODEL HC-00 SERIAL NUMBER 0000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, IL 00 0 0/ HC-00 ENGINE, CRANKCASE, COVER 0 ENGINE, CRANKCASE, COVER KEY PART NUMBER QTY

More information

Super XL 925 Chain Saw UT Page 1 of 15 Carburetor Chamber

Super XL 925 Chain Saw UT Page 1 of 15 Carburetor Chamber Super XL 925 Chain Saw UT-10415 Page 1 of 15 Carburetor Chamber Super XL 925 Chain Saw UT-10415 Page 2 of 15 Carburetor Chamber 1 63370A 1 RETAINER- Reed valve 2 63166A 4 VALVE- Reed 3 63371B 1 SEAT- Reed

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 680GC Gas Concrete Saw Serial numbers starting with 967 & 977 Effective July 1, 2015 I TABLE OF CONTENTS 680GC Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 680GC

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 680GC Petrol Concrete Saw Serial numbers starting with 967 & 977 Effective January 1, 2013 I TABLE OF CONTENTS 680GC Petrol Concrete Saw ITEM DESCRIPTION KEY

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 680GC Gas Concrete Saw Serial numbers starting with 967 & 977 Effective January 1, 2019 I TABLE OF CONTENTS 680GC Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 680GC

More information

Repair Manual 11/99 PS-34. Page 1

Repair Manual 11/99 PS-34. Page 1 Repair Manual /99 PS-4 Page Table of contents Index Technical Data page Special tools 4 Repair instructions, general 0 Chain brake 6 0 Centrifugal clutch 8 0 Oil pump 9-04 Ignition system - 0 Starting

More information

K&T Saw Shop or

K&T Saw Shop or 14-600080 MINI MAC 6A 05/73 to 12/73 IPL 89090 Page 1 of 12 Accessories www.ktoutdoor.com 14-600080 MINI MAC 6A 05/73 to 12/73 IPL 89090 Page 2 of 12 Accessories 84992 Kit - Reed muffler 85933 Kit - Spark

More information

613GC Key A Parts Starter & Ignition Assembly

613GC Key A Parts Starter & Ignition Assembly 613GC Key A Parts Starter & Ignition Assembly 73866 Screw (same as B26) A01 505514 Starter Rope Handle A02 73904 Starter Rope A03 73909 Starter Coil Spring & Housing A04 71451 Starter Case Plate A05 73910

More information

SXLAO Chain Saw UT Page 1 of 21 Carburetor Chamber

SXLAO Chain Saw UT Page 1 of 21 Carburetor Chamber SXLAO Chain Saw UT-10045 Page 1 of 21 Carburetor Chamber SXLAO Chain Saw UT-10045 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-

More information

245 Chain Saw UT Page 1 of 16 Air Filter & Handles & Oil Pump

245 Chain Saw UT Page 1 of 16 Air Filter & Handles & Oil Pump 245 Chain Saw UT-10631 Page 1 of 16 Air Filter & Handles & Oil Pump 245 Chain Saw UT-10631 Page 2 of 16 Air Filter & Handles & Oil Pump Ref # Part Number Qty Description 1 80870 1 SCREW- 10-32 x 3/8 2

More information

Small Engine Parts. 240 Chain Saw UT Page 1 of 14 Carburetor Chamber/Rear Handle

Small Engine Parts. 240 Chain Saw UT Page 1 of 14 Carburetor Chamber/Rear Handle Small Engine Parts 240 Chain Saw UT-10629 Page 1 of 14 Carburetor Chamber/Rear Handle 240 Chain Saw UT-10629 Page 2 of 14 Carburetor Chamber/Rear Handle Ref # Part Number Qty Description 1 A03151 1 HANDGUARD

More information

PARTS CATALOG. CHAIN SAW CS-3500(6digits)(35)(36) CS-3500(6digits)(35)(36)

PARTS CATALOG. CHAIN SAW CS-3500(6digits)(35)(36) CS-3500(6digits)(35)(36) PARTS CATALOG CHAIN SAW 1. Cylinder, Crankcase, Piston 2 900238-05012 2 SCREW 5*12 5*12 3 130510-39930 1 ADAPTER, INTAKE 3 130510-39931 1 ADAPTER, INTAKE 3 130510-39932 1 ADAPTER, INTAKE 4 130016-39930

More information

CHAIN SAWS G561AVS G621AVS

CHAIN SAWS G561AVS G621AVS 2626-93121 CHAIN SAWS G561AVS G621AVS APPLICABLE SERIAL NUMBERS: OCTOBER 1998 G561AVS 814608 and up G621AVS 820954 and up Fig.1 1 Fig.2 2 Fig.1 1 1 2616-12112 2618-12115 CYLINDER 1 K4 2 3356-12141 GROMMET

More information

G5200. Fig.1 POWER UNIT

G5200. Fig.1 POWER UNIT CHAIN SAW 5200 Fig.1 POWER UNIT Fig.1 POWER UNIT Key# PART NUMBER DESCRIPTION NOTE 1 2880-12111 Cylinder 1 ø45 2 2880-14111 Inlet Pipe 1 3 2880-14120 Spring 5 2880-14150 Inner Guide 1 6 2670-14311 Bracket

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 613GC Gas Concrete Saw Effective January 1, 2011 TABLE OF CONTENTS 613GC Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 613GC Gas Saw Service Items n/a ii Starter

More information

TRIMMER/BRUSH CUTTER PARTS CATALOG MODELS SRM-3800 TYPE 1

TRIMMER/BRUSH CUTTER PARTS CATALOG MODELS SRM-3800 TYPE 1 TRIMMER/BRUSH CUTTER PARTS CATALOG MODELS SRM-3800 TYPE 1 SERIAL NUMBER 0001 & UP MODELS SRM-3800 TYPE 1E SERIAL NUMBER 0001 & UP ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, IL 004 2224 0/ ENGINE,

More information

SHRED 'N' VAC PLUS PARTS CATALOG MODEL ES-2100 TYPE 1 TYPE 1E

SHRED 'N' VAC PLUS PARTS CATALOG MODEL ES-2100 TYPE 1 TYPE 1E SHRED 'N' VAC PLUS PARTS CATALOG MODEL ES-00 TYPE TYPE E SERIAL NUMBER 0000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, IL 00 www.echo-usa.com Copyright 00 ECHO, Incorporated. All Rights Reserved

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 680GC Gas Concrete Saw Serial numbers starting with 967 & 977 Effective January 1, 2018 I TABLE OF CONTENTS 680GC Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 680GC

More information

3400 Gas Saw Page 1 of 25 Bow Guide & Chain Informatio

3400 Gas Saw Page 1 of 25 Bow Guide & Chain Informatio 3400 Gas Saw Page 1 of 25 Bow Guide & Chain Informatio 44235 13".050/ 3/8 pitch, P760-80 Bow Guide 51293 13".050/ 3/8 pitch, P760-80 Chain 44236 14".050/ 3/8 pitch, P760-87 Bow Guide 51294 14".050/ 3/8

More information

240 Chain Saw UT Page 1 of 16 Air Cleaners & Handles & Oil Pump

240 Chain Saw UT Page 1 of 16 Air Cleaners & Handles & Oil Pump 240 Chain Saw UT-10627 Page 1 of 16 Air Cleaners & Handles & Oil Pump 240 Chain Saw UT-10627 Page 2 of 16 Air Cleaners & Handles & Oil Pump Ref # Part Number Qty Description 1 95036 1 ROD- Throttle 2 95222

More information

XL12 Chain Saw UT Page 1 of 21 Carburetor Chamber

XL12 Chain Saw UT Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-

More information

300 Chain Saw UT Page 1 of 16 Accessories I

300 Chain Saw UT Page 1 of 16 Accessories I 300 Chain Saw UT-10687 Page 1 of 16 Accessories I 300 Chain Saw UT-10687 Page 2 of 16 Accessories I Ref # Part Number Qty Description A-02177 A02177 1 BUMPER SPIKE KIT 9477299 9477299 1 RUBBER TUBING (10')

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1106 020 2506 1 Crankcase (2) 2-11 2 0000 988 5217 1 Connector (2) 3 0000 988 5200 2 Connector (2) 4 1106 641

More information

K&T Saw Shop or

K&T Saw Shop or 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories www.ktoutdoor.com 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 2 of 19 Accessories 84453 Kit - Piston tool 69191 Kit - Pressure

More information

M MAC /77 to 02/83 IPL R2 Page 1 of 16 Tools & Accessories K&T Saw Shop or

M MAC /77 to 02/83 IPL R2 Page 1 of 16 Tools & Accessories K&T Saw Shop or 11-600016M MAC 110 01/77 to 02/83 IPL 95807-R2 Page 1 of 16 Tools & Accessories 11-600016M MAC 110 01/77 to 02/83 IPL 95807-R2 Page 2 of 16 Tools & Accessories 95169 Kit - Spark Arrester 91485 Wrench -

More information

McCULLOCH. Stroke. 30 mm (1.2 in.) 30 mm (1.2 in.) 30 mm (1.2 in.) 30 mm (1.2 in.)

McCULLOCH. Stroke. 30 mm (1.2 in.) 30 mm (1.2 in.) 30 mm (1.2 in.) 30 mm (1.2 in.) SERVICE MANUAL Model Eager Beaver 2010, Mac 3210 Silver Eagle 2012 Eager Beaver 2014, Mac 3214, Silver Eagle 2014 Eager Beaver 2016, Mac 3216, Silver Eagle 2016 Bore Stroke DispL (2.1 cu. in.) (2.1CU.

More information

1900E Page 1 of 24 Air Filter & Insulator

1900E Page 1 of 24 Air Filter & Insulator 1900E Page 1 of 24 Air Filter & Insulator 1900E Page 2 of 24 Air Filter & Insulator Ref # Part Number Qty S/P/F Description 1 GM010176 1 SCREW, CHOKE COVER (25cc) GM010120 1 SCREW, CHOKE COVER (21cc) 2

More information

SPARE PARTS LIST CHAIN SAWS GZ550

SPARE PARTS LIST CHAIN SAWS GZ550 SPARE PARTS LIST CHAIN SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 501 69 17-01 COMBINATION WRENCH 1 CARBURETOR & AIR FILTER CARBURETOR & AIR FILTER Ref Part No Description Remark

More information

K&T Saw Shop or

K&T Saw Shop or 11-600030 MAC 2-10PS 04/67 to 11/67 IPL 84288 Page 1 of 25 Accessories www.ktoutdoor.com 11-600030 MAC 2-10PS 04/67 to 11/67 IPL 84288 Page 2 of 25 Accessories 83434 Manual - Owner's 62827 Wrench - Screwdriver

More information

K&T Saw Shop or

K&T Saw Shop or 11-600013U PRO 10-10 04/75 to 04/77 IPL 92379A-R1 Page 1 of 18 Accessories 11-600013U PRO 10-10 04/75 to 04/77 IPL 92379A-R1 Page 2 of 18 Accessories 91090 Bar-16" Sprocket Nose 86979N Chain Asy-16" PM370

More information

Page 1 of 26 Air Filter and Insulator

Page 1 of 26 Air Filter and Insulator 2130 Page 1 of 26 Air Filter and Insulator 2130 Page 2 of 26 Air Filter and Insulator Ref # Part Number Qty S/P/F Description 1 GM010176 1 SCREW, CHOKE COVER (25cc) 1 GM010120 1 SCREW, CHOKE COVER (21cc)

More information

Model No. EA6100P PETROL CHAIN SAW

Model No. EA6100P PETROL CHAIN SAW 1 / 6 2 / 6 3 / 6 4 / 6 5 / 6 6 / 6 1 / 5 Item Parts No. Description I/C Qty N/O Sales Purch. Note 001 181114202 TANK CAP CPL. 1 D10 INC. 2 002 963229036 PACKING RING 1 003 908006145 FILLISTER HEAD SCREW

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 0GC Gas Concrete Saw Effective January, 09 0 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject to change

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1117 020 2106 1 Crankcase 2-9 2 9022 341 1050 4 Spline screw IS-M5x25 3 0000 988 5211

More information

Small Engine Parts. Super 2 Chain Saw UT Page 1 of 12 Engine Internals

Small Engine Parts. Super 2 Chain Saw UT Page 1 of 12 Engine Internals Small Engine Parts Super 2 Chain Saw UT-10654 Page 1 of 12 Engine Internals Super 2 Chain Saw UT-10654 Page 2 of 12 Engine Internals Ref # Part Number Qty Description 1 A95072 1 CRANKCASE & CYLINDER ASSY.

More information

rev 2_ EA5000P53G (Makita Teal) EA5000PR (Makita Red) PS-5105 (Dolmar Red) PS-5105H (Dolmar Red)

rev 2_ EA5000P53G (Makita Teal) EA5000PR (Makita Red) PS-5105 (Dolmar Red) PS-5105H (Dolmar Red) (Makita Teal) (Makita Red) (Dolmar Red) H (Dolmar Red) 1 Tank, Handle 5 25 17 3 12 1 15 6 114 113 16 13 9 10 14 8 11 4 2 18 21 23 20 22 24 2 1 Tank, Handle H 1 1 181-114-720 TANK CPL. BLUE 1 1 1 181-114-280

More information

Drawing A Crankcase. Drawing A Crankcase

Drawing A Crankcase. Drawing A Crankcase Drawing A Crankcase Drawing A Crankcase 1 1122 020 2101 1 Crankcase 2-18 2 9022 341 1300 2 Spline screw IS-M6x20 3 0000 988 5211 1 Connector 4 9371 470 2610 2 Cylindrical pin 5x18 5 0000 974 1200 1 Notched

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List RZ60/603GC Gas Concrete Saw Effective January 1, 2018 2017 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List RZ60/603GC Gas Concrete Saw Effective January 1, 2016 2016 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List RZ60/603GC Gas Concrete Saw Effective January 1, 2016 2016 ICS, Blount International Inc. Supersedes all previous pricing. Specifications and pricing are subject

More information

PARTS LIST MCV31T CONTENTS

PARTS LIST MCV31T CONTENTS PARTS LIST MCV1T CONTENTS 1. ENGINE...1 ~ 2 2. OIL PUMP... ~ 4. CARBURETOR...5 ~ 4. ENGINE CASE... ~ 10 5. RECOIL STARTER...11 ~ 12. HANDLE...1 ~ 14 7. CHAIN CASE...15 ~ 1. LABEL, ACCESSORIES...17 ~ 1

More information

XL Chain Saw UT Page 1 of 12 Engine Internals

XL Chain Saw UT Page 1 of 12 Engine Internals XL Chain Saw UT-10655 Page 1 of 12 Engine Internals XL Chain Saw UT-10655 Page 2 of 12 Engine Internals Ref # Part Number Qty S/P/F Description 1 A95071A 1 CRANKCASE & CYLINDER ASSY. 2 80571 3 /P SCREW-

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 613GC Gas Concrete Saw Effective January 1, 2017 TABLE OF CONTENTS 613GC Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 613GC Gas Saw Service Items n/a 1 Starter

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase, Cylinder Illustration A Crankcase, Cylinder Ref.Nr. Item code Quantity Description 1 1113 020 2107 1 Crankcase (1,2,4,5,7,8) 2-11 1 1113 020 2108 1 Crankcase (3,6) 2-11 2 1113

More information

K&T Saw Shop or

K&T Saw Shop or 11-400056-02 MAC 22 GHT 05/94 to 05/96 IPL 211538 Page 1 of 12 Carburetor Assembly www.ktoutdoor.com 11-400056-02 MAC 22 GHT 05/94 to 05/96 IPL 211538 Page 2 of 12 Carburetor Assembly 322739-01 1 Carburetor,

More information

SPARE PARTS LIST CHAIN SAWS 455 E

SPARE PARTS LIST CHAIN SAWS 455 E SPARE PARTS LIST CHAIN SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 501 69 17-01 COMBINATION WRENCH 1 CARBURETOR & AIR FILTER CARBURETOR & AIR FILTER Ref Part No Description Remark

More information

SPARE PARTS LIST. CHAIN SAWS 455 Rancher

SPARE PARTS LIST. CHAIN SAWS 455 Rancher SPARE PARTS LIST CHAIN SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 501 69 17-01 COMBINATION WRENCH 1 CARBURETOR & AIR FILTER CARBURETOR & AIR FILTER Ref Part No Description Remark

More information

K&T Saw Shop or

K&T Saw Shop or 11-400060-02 TITAN 2100 08/92 to 10/92 IPL 211404 Page 1 of 12 Carburetor Assembly www.ktoutdoor.com 11-400060-02 TITAN 2100 08/92 to 10/92 IPL 211404 Page 2 of 12 Carburetor Assembly 1 224142-03 1 Carburetor

More information

Illustration Engine. PTX 2710 (EPA 3) Pole pruner. 3/27/2017 Page Copyright COMET USA, INC.

Illustration Engine. PTX 2710 (EPA 3) Pole pruner. 3/27/2017 Page Copyright COMET USA, INC. Documents Engine Starter assy and clutch Tank and air filter Adjustable telescopic pole Pruner Carburetor WT-1150 Accessories 3/27/2017 Page 1-16 Illustration Engine 3/27/2017 Page 2-16 Illustration Engine

More information

SPARE PARTS LIST CHAIN SAWS

SPARE PARTS LIST CHAIN SAWS SPARE PARTS LIST CHAIN SAWS 61. 2017-08 ACCESSORIES 61. 2017-08 ACCESSORIES 61. 2017-08 Ref Part No Description Remark QTY KIT 1 503 55 85-04 TOOL 1 2 503 62 12-01 GREASE 1 3 501 91 14-01 GREASE GUN 1

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 613GC Petrol Concrete Saw Effective January 1, 2013 TABLE OF CONTENTS 613GC Petrol Concrete Saw ITEM DESCRIPTION KEY PAGE 613GC Petrol Saw Service Items n/a

More information

K&T Saw Shop or

K&T Saw Shop or 12-400060-06 TITAN 2030 12/94 to 09/96 IPL 211632 Page 1 of 11 Special Tools & Accessories www.ktoutdoor.com 12-400060-06 TITAN 2030 12/94 to 09/96 IPL 211632 Page 2 of 11 Special Tools & Accessories 222785

More information

CS4018 Chain Saw UT R Page 1 of 14 Carburetor - Muffler

CS4018 Chain Saw UT R Page 1 of 14 Carburetor - Muffler CS4018 Chain Saw UT-10736-R Page 1 of 14 Carburetor - Muffler CS4018 Chain Saw UT-10736-R Page 2 of 14 Carburetor - Muffler Ref # Part Number Qty Description 1 1 MUFFLER - Complete Not Used On This Model

More information

K&T Saw Shop or

K&T Saw Shop or 12-600031U PRO MAC 55 08/73 to 03/77 IPL 92384A-R1 Page 1 of 20 Accessories www.ktoutdoor.com 12-600031U PRO MAC 55 08/73 to 03/77 IPL 92384A-R1 Page 2 of 20 Accessories 84453 Kit - Piston tool 69191 Kit

More information

SPARE PARTS LIST CHAIN SAWS CS2255

SPARE PARTS LIST CHAIN SAWS CS2255 SPARE PARTS LIST CHAIN SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 501 69 17-01 COMBINATION WRENCH 1 CARBURETOR & AIR FILTER CARBURETOR & AIR FILTER Ref Part No Description Remark

More information

SPARE PARTS LIST. CHAIN SAWS 365SP from

SPARE PARTS LIST. CHAIN SAWS 365SP from SPARE PARTS LIST CHAIN SAWS 365SP from 2018-01- CHAIN BRAKE & CLUTCH COVER 365SP from 2018-01- CHAIN BRAKE & CLUTCH COVER 365SP from 2018-01- Ref Part No Description Remark QTY KIT 1 525 75 52-01 SCREW

More information

MT 3750 (EPA 3) Chainsaw. Documents MT 3750 (EPA 3) Engine Epa3. Starter assy. Crankcase. Tank and handle. Clutch and brake. Carburetor WT-781E

MT 3750 (EPA 3) Chainsaw. Documents MT 3750 (EPA 3) Engine Epa3. Starter assy. Crankcase. Tank and handle. Clutch and brake. Carburetor WT-781E Chainsaw Documents Engine Epa3 Starter assy Crankcase Tank and handle Clutch and brake Carburetor WT-781E Carburetor WT-780F 1/18/2017 Page 1-15 Illustration Engine Epa3 1/18/2017 Page 2-15 Illustration

More information

Drawing A Shortblock MS 250, MS 250 C 1 SCS

Drawing A Shortblock MS 250, MS 250 C 1 SCS Drawing A Shortblock 1 Drawing A Shortblock Reference Item number Qty Description 1 1123 020 1209 1 Cylinder with piston Ø 42.5 mm (1,3-6) 4-8, 15 2 1123 020 1220 1 Cylinder with piston Ø 42.5 mm (2,6)

More information

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List Replacement Parts & Accessories Price List 633GC / 633F4 Gas Concrete Saws Effective January 1, 20167 TABLE OF CONTENTS 633GC / 633F4 Gas Saws ITEM DESCRIPTION KEY PAGE 633GC / 633F4 Gas Saw Service Items

More information

K&T Saw Shop or

K&T Saw Shop or 11-400128-24 MAC 2825 01/92 to 10/92 IPL 211237 Page 1 of 13 Carburetor Assembly www.ktoutdoor.com 11-400128-24 MAC 2825 01/92 to 10/92 IPL 211237 Page 2 of 13 Carburetor Assembly 224033-02 Carburetor

More information

ECS-320,320B CYLINDER/PISTON/CRANK SHAFT

ECS-320,320B CYLINDER/PISTON/CRANK SHAFT ECS-320,320B CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty 001 157-11666-90 SPARK PLUG CAP ASS'Y 1 002 018-01805-20 SPARK PLUG CJ8 1 006 002-01730-20 CYLINDER 1 007 990-11050-161 SCREW

More information

rev 2_ EA6100P53G (Makita Teal) EA6100PR (Makita Red) PS-6100 (Dolmar Red) PS-6100H (Dolmar Red)

rev 2_ EA6100P53G (Makita Teal) EA6100PR (Makita Red) PS-6100 (Dolmar Red) PS-6100H (Dolmar Red) (Makita Teal) (Makita Red) (Dolmar Red) (Dolmar Red) 1 Tank, Handle USA 168 24 12 125 22 20 100 108 23 11 25 127 A 88 123 21 58 130 67 9 3 4 65 67 118 66 61 118 100 26 59 60 167 109 109 2 1 Tank, Handle

More information