2002 Series Solenoid Air Pilot Actuated Valves

Transcription

1 Series Solenoid Air Pilot Actuated Valves

2 Table of Contents 00 Series F Series Hardwired and Plug-in Solenoid Valve Manifold-Exploded View 3 Technical and Operating Data How to Order 5 Valve Manifold Assembly Dimensions 6 Individual Base Dimensions 7 Individual Base Assembly Kits 7 External Pilot Supply 7 Bar Shock Manifold 8 Plug Connector 9 Pilot Valve Assembly 9 End Plate Kits 9 Service Kits and Parts 0- O and R Series 5 Pin Sub-D and Terminal Strip Options-Exploded View Technical and Operating Data 3- How to Order 5 Single Station Manifold Dimensions 6 FlexiBlok Assembly Dimensions 7 Manifold Block Assemblies 8 Internal/External Pilot Selection 8 DIN Rail Clamp Kit 9 Interchangeable Cartridge Fittings and Port Plugs 9 Solenoid Valve Assemblies 0 Solenoid Control Board Circuit Diagrams 0 Valve Unit Pin Out 0 Solenoid Board Encapsulation Assembly 0 Blank Station Plate Kit Mid-Station Supply and Exhaust Block End Plate Assembly Kit 5 Pin Male Sub-D Housing Assembly Kit Terminal Strip Housing Assembly Kit Service Kits and Parts 3-5

3 Manifold and Wiring Architecture Hardwired and Plug-In Solenoid Valve Manifold F Series (exploded view) Fitting Clip Right End Plate Assembly (supply & exhaust) Blank Station Plate Manifold Stud Manifold Gasket External Pilot Exhaust End Plate Gasket Retaining Clip Pilot Blocking Gasket Left End Plate Assembly (Supply & Exhaust) Interchangeable Push-in Fitting External Pilot Supply DIN Rail Mounting Clip 3

4 F Series Individual Base Mount Hardwired Manifold Mount 5 Ported, and 3 position, -way and dual 3-way, Packed Spool Cv: 0.5 Low current requirements Elimination of internal wiring Buna-N seals provide leak-proof sealing Pusher piston high spool shifting force Adjustable port sizes utilizing interchangeable cartridge fittings single solenoid air pilot position -way double solenoid air pilot position -way Technical Data Valve Data English Metric 3 5 (EB)(P)(EA) 3 5 (EB)(P)(EA) Cv Flow Capacity Operating Pressure Range: Way Dual 3 Way.5 80 PSIG upstream pressure to atmosphere 8" Hg. Vacuum to 50 PSIG 0 to 00 PSIG 6 6 bar upstream to 5 bar downstream Vacuum to 0 bar 0 to 7 bar Pilot Pressure Range 35 to 5 PSIG.5 to 8 bar Temperature Range (Ambient) -0 F to +5 F -3 C to +6 C double solenoid air pilot 3 position -way open center 3 5 (EB)(P)(EA) double solenoid air pilot position dual 3-way & NO double solenoid air pilot 3 position -way closed center 3 (EB) 3 5 (EB)(P)(EA) (P) 5 (EA) double solenoid air pilot position dual 3-way & NC 3 (EB) (P) 5 (EA) Operating Data double solenoid air pilot position dual 3-way NC, NO 3 (EB) (P) 5 (EA) All Solenoids Are Continuous Duty Rated VDC VDC Power (Watts) Holding Current (Amps.) Response Time in Seconds Energize De-Energize Energize De-Energize -Position, Single, Spring Return Position, Double, Detented N/A N/A 3-Position, Spring Centered Dual 3-way

5 How to Order Valves F BB A B N Series Identifier F = Rubber Packed Spool Without Body to Base Plug Port Size 0* = 0/3 UNF-3B (Port types G only) = /8 (All port types) = / (Port type L and D only) C = M5 (Port type G only) D = 5/3 (mm) (Port type L only) F = 6mm (Port type L only) * Use for valve unit only (mounting = 00) A & B Actuator B = Solenoid Pilot with Flush Non-locking Override (th or th and 5th Position) W = Differential Air Return (5th Position Only) 00 = Manifold Block without Valve (Blank Station) Function = Position, -Way 5 = 3 Position, -Way, Open Center, Dual Pressure 6 = 3 Position, -Way, Closed Center A = Dual 3-Way, A Normally Open - B Normally Open* C = Dual 3-Way, A Normally Closed - B Normally Open* D = Dual 3-Way, A Normally Closed - B Normally Closed* P = Indicates Blank Station Plate Voltage 60 = VDC 6 = VDC 00 = Not Applicable Options A = External Pilot Supply 000 = No Option Port Type L = Push-in Fitting (Manifold Mount Only) N = NPTF (Individual Base Only) 0 = Valve Unit Only G = G Tap (Individual Base Only) D = Barbed Fitting (Manifold Mount Only) Wiring Option 3 = Straight Pin Plug-in with Light (DC Voltage) B = Hardwired (DC Voltage) D = 90 Degree Pin Plug-in with Light (DC Voltage) 0 = Blank Station Plate Mounting = Individual Base Mount, Side Ports, Individual Exhaust = Manifold Mount, Side Ports, Individual Exhaust 00 = Valve Unit Only *Valve Functions for use in Pressure Applications Only Manifold Assembly AK 0 6 H 0000 L DRM Electrical/Electronics Type & Location 0 = Hardwired Valve Manifold Valve Line 6 = 00 Series Number of Valve Stations A = I = 9 Q = 7 B = J = 0 R = 8 C = 3 K = S = 9 D = L = T = 0 E = 5 M = 3 U = F = 6 N = V = G = 7 O = 5 W = 3 H =8 P = 6 X = Options STD = Standard DRM = DIN Rail Mounting (Std.35mm) MUF = Muffler in End Plates DWM = DIN Rail with MUF Port Type L = Push-In End Plate Port Size = / (Port type "L" only) H = 8mm (5/6) = /8 NPTF or G Tap 5

6 Manifold Assembly Example AK0 Hardwired Valve Manifold Shaded components described by Assembly Kit (AK model number designation (page 5). Each valve manifold station is listed in sequential order from left to right when facing the port side of the manifold as indicated. 3/5 3/5 Example order: AK06D0000LSTD Valve Station FBBABL0006 Valve Station FBBABL0006 Valve Station 3 FBBABL0006 Valve Station FBBABL0006 ASSEMBLED Valve Manifold Assembly Dimensions: Inches (mm) X valve stations: CLEARANCE HOLE FOR M SCREW () REQUIRED XE A V K K U J J L B C C B 3/5 3/5 S D R Q N X X E O M P E T F F G G H I (TYP.) H B A B C D E F G H I J K L M N O 3. (86.6) 0.7 (8.0) 0.6 (.9).3 (58.7).88 (7.8) 0.37 (9.) 0.5 (.) 0.68 (7.3) 0. (0.5) 0.56 (.).50 (38.) 0.38 (9.7) 0.7 (6.9) 0.5 (3.0) 0.8 (0.6) P Q R S T U V (.).08 (7.).6 (.7).37 (60.).57 (65.3) 3.69 (93.7) 3.8 (97.5)

7 Individual Base Mount Assembly Dimensions: Inches (mm) A B C D E F G H I J K L M N O P 0.63 (6.0).9 (9.3) 0.7 (8.3) 0.50 (.7) 0.6 (6.6) 0.30 (7.70) 0.0 (5.).68 (.7) 3.0 (8.3).70 (3.) 0. (3.0) 0. (3.0) 0.6 (6.3).6 (66.5) 0.38 (9.7) 0.38 (9.7) Q R S T U V W X Y Z AA BB CC DD EE 0.59 (5.0) 0.30 (7.6) 0.35 (8.9) 0.7 (8.3) 0.6 (.) 0. (.) 0.88 (.) 0.95 (5.00) 0.39 (9.9). (53.6).33 (59.) 3.68 (93.5) 3.8 (97.0) 0.96 (.) 0.7 (8.3) Individual Base Assembly Kit For External Pilot Supply Port Size Part. /8 NPTF For External Pilot Supply, remove Plug (9-7) and insert M3 Pipe Plug (7-693) as shown 0/3 UNF-3B M

8 Bar Shock Manifold Stations Part TYP #6 (.77) DRILL THRU PLS.0 B REF REF A Blank Station Plate Kit Req'd Part Name Part Screw 7-8 Gasket Blank Station Plate

9 Plug Connector Lead Length Part. " Lead " Lead " Lead Plug connector is not included with solenoid assemblies or valve models. Must order separately. Note: Wire Gage = AWG Pilot Valve Assembly Hardwired Straight Plug-in Voltage Hardwired Straight Plug-In 90 Degree Plug-In VDC VDC Plug connector is not included with solenoid assemblies or valve models. Must order separately. 90º Plug-in End Plate Kits Req'd Part Name Part Gasket 3-58 Gasket Fitting Clip /3 Slip-in Fitting mm Slip-in Fitting Fitting See-p. 6 Gasket LH End Plate Gasket Lockwasher RH End Plate DIN rail option only RH Mounting Cover Screw End Plate Cover Screw Screw Muffler (optional) Vented Cover (optional) Exhaust Plug (optional) Port Type PORT PORT SIZE Kit w/o muffler, w/o DIN Rail Kit w/o muffler, w/ DIN Rail Kit w/ muffler, w/o DIN Rail Kit w/ muffler, w/ DIN Rail / Push-In 3/5 / X, XE 5/3 8mm Push-In 3/5 8mm X, XE 8mm Screw Spring Clamp 5-70 Pilot Exhaust Plug LH Mounting Cover

10 F Valve Service Kits and Parts, and 3 Position -Way Kit MKF-K (for models F0BW, FBW, FCBW) Kit MKF-K (for models F0BB, FBB, FCBB) BW BB BB5/6 Part Name Part N/A N/A Spring Cover Ass y 0-59 N/A Body (not sold separately) 3 Nameplate -059 * * 3* Gasket Pilot Adaptor Ass y Pilot Valve Ass y See p. 8 7 Screw * N/A N/A Spring * * * Gasket * * N/A Spool Ass y (BA, BB) -76 * * * Piston 7-38 * * * U-Cup Seal Screw 7-83 N/A N/A Pilot Adaptor Ass y N/A N/A Pilot Adaptor Ass y N/A N/A Adaptor N/A N/A Body N/A N/A Screw N/A N/A * Piston N/A N/A * Spring Retainer N/A N/A * Spring N/A N/A Spring Retainer N/A N/A * Spool Ass y (BB5) N/A N/A * Spool Ass y (BB6) -77 *Indicated part included in kit Kit MKF-K35 (for models F0BB5, FBB5, FCBB5) Kit MKF-K36 (for models F0BB6, FBB6, FCBB6)

11 F Valve Service Kits and Parts, Dual 3-Way Kit MKF-K3A (for models F0BBA, FBBA, FCBBA) Kit MKF-K3D (for models F0BBD, FBBD, FDBBD, FFBBD) BBA BBD BBC Part Name Part Pilot Valve Ass y See p. 9 Pilot Adaptor Ass y Nameplate -059 Pilot Adaptor Ass y Screw Screw * * * Bumper * * * Gasket * N/A * Spool Ass y (N.O.) Body (not sold separately) * * * Spring 5-36 * * * Gasket N/A * * Spool Ass y (N.C.) -79 *Indicated part included in kit Kit MKF-K3C (for models F0BBC, FBBC, FDBBC, FFBBC)

12 Manifold and Wiring Architecture 5 Pin Sub-D and Terminal Strip Options Body to Base Plug-In 0 Spool & Sleeve series & R Packed Spool series (exploded view) Terminal Strip Option Terminal Strip Housing Assembly Left End Mounting Bracket Assembly Phoenix Quick Connect Terminal Strip / NPTF Conduit Connection 00 Double Solenoid Air Pilot Valve Unit Fitting Clip Sub-D Option Can be used interchangeably End Plate Gasket Blank Station Plate DIN Rail Compatible Plug-in Manifold Assembly Right End Plate Assembly (supply & exhaust) External Pilot Exhaust Retaining Clip 5 Pin Sub-D Housing Assembly Left End Mounting Bracket DIN Rail Mounting Clip External Pilot Supply Interchangeable Plug-in Fitting Left End Plate Assembly (Supply & Exhaust)

13 0 Series 5 Ported, and 3 position, -way, Spool & Sleeve Cv: 0.0 Solenoid air pilot actuated Low current requirements Elimination of internal wiring Pusher piston high spool shifting force Modular Fieldbus electronics and I/O Adjustable port sizes utilizing interchangeable cartridge fittings Technical Data Valve Data English Metric single solenoid air pilot position -way 3 5 (EB)(P)(EA) Cv Flow Capacity PSIG upstream pressure to atmosphere Operating Pressure Range: 8" Hg. Vacuum to 50 PSIG 97 6 bar upstream to 5 bar downstream Vacuum to 0 bar Pilot Pressure Range 35 to 00 PSIG.5 to 7 bar Temperature Range (Ambient) -0 F to +5 F -3 C to +6 C double solenoid air pilot position -way double solenoid 3 position -way open center 3 5 (EB)(P)(EA) 3 5 (EB)(P)(EA) double solenoid 3 position -way closed center 3 5 (EB)(P)(EA) Operating Data All Solenoids Are Continuous Duty Rated VDC VDC Power (Watts) Holding Current (Amps.) Response Time in Seconds Energize De-Energize Energize De-Energize -Position, Single, Spring Return Position, Double, Detented 0.00 N/A N/A 3-Position, Spring Centered

14 R Series - Packed Spool 5 Ported, and 3 position, -way and dual 3-way, Packed Spool Cv: 0.5 (-way) 0.0 (Dual 3-way) Solenoid air pilot actuated Low current requirements Elimination of internal wiring Buna-N seals provide leak-proof sealing Pusher piston high spool shifting force Modular Fieldbus electronics and I/O Adjustable port sizes utilizing interchangeable cartridge fittings single solenoid air pilot position -way double solenoid air pilot position -way Technical Data Valve Data English Metric Cv Flow Capacity.5 80 PSIG upstream pressure to atmosphere 6 6 bar upstream to 5 bar downstream 3 5 (EB)(P)(EA) double solenoid air pilot 3 position -way open center 3 5 (EB)(P)(EA) double solenoid air pilot 3 position -way closed center Operating Pressure Range: Way Dual 3 Way 8" Hg. Vacuum to 00 PSIG 0 to 00 PSIG Vacuum to 7 bar 0 to 7 bar Pilot Pressure Range 35 to 00 PSIG.5 to 7 bar Temperature Range (Ambient) -0 F to +5 F -3 C to +6 C 3 5 (EB)(P)(EA) double solenoid air pilot dual 3-way & NO double solenoid air pilot dual 3-way & NC 3 (EB) (P) 3 5 (EB)(P)(EA) 5 (EA) 3 (EB) (P) 5 (EA) Operating Data double solenoid air pilot position dual 3-way NO, & NC 3 (EB) (P) 5 (EA) All Solenoids Are Continuous Duty Rated VDC VDC Power (Watts) Holding Current (Amps.) Response Time in Seconds Energize De-Energize Energize De-Energize -Position, Single, Spring Return Position, Double, Detented 0.00 N/A 0.00 N/A 3-Position, Spring Centered Dual 3-way

15 How to Order Valves R BB A Z M K Series Identifier 0 = Spool/Sleeve with Body to Base Plug R = Rubber Packed Spool With Body to Base Plug Port Size 0 = Used for Valve Unit Only, Mounting = 00 = /8 = / D = 5/3 (mm) (Port type "K" only) F = 6mm (Port type "K" only) A & B Actuator B = Solenoid Pilot with Flush Non-locking Over ride (th or th And 5th Position) W = Differential Air Return (5th Position Only) 00 = Manifold Block without Valve (Blank Station) Function = Position, -Wayay 5 = 3 Position, -Way, Open Center, Dual Pressure 6 = 3 Position, -Way, Closed Center A = Dual 3-Way, A Normally Open - B Normally Open* (R series only) C = Dual 3-Way, A Normally Closed - B Normally Open* (R series only) D = Dual 3-Way, A Normally Closed - B Normally Closed* (R series only) P = Indicates Blank Station Plate Voltage 60 = VDC 6 = VDC Options B = Flush Locking Override A = External Pilot Supply 000 = No Option Port Type K = Push-in Fitting (Manifold Mount Only) P = Valve Unit Only Wiring Option M = Plug-In DC w/light O = Blank Station Plate Mounting Z3 = Manifold Block, Side Ports Only, Single Solenoid Output Z = Manifold Block, Side Ports Only, Double Solenoid Output 00 = Valve Unit Only *Valve Functions for use in Pressure Applications Only Manifold Assembly AK F 6 H 0000 L DRM Electrical/Electronics Type & Location F = Terminal Strip J = 5 Pin Sub-D Valve Line 6 = 00 Series *Number of Valve Stations A = I = 9 Q = 7 B = J = 0 R = 8 C = 3 K = S = 9 D = L = T = 0 E = 5 M = 3 U = F = 6 N = V = G = 7 O = 5 H =8 P = 6 Options STD = Standard DRM = DIN Rail Mounting (Std.35mm) MUF = Muffler in End Plates DWM = DIN Rail with MUF Port Type L = Push-in End Plate Port Size = / (Port type "L" only) H = 8mm (5/6) The electrical connection type. Sub-D (AK J ) maximum solenoid outputs Terminal Strip (AK F ) 6 maximum solenoid outputs 5

16 Manifold Assembly Example AKJ 5 Pin Sub-D Shaded components described by Assembly Kit (AK) model number designation (page 5). Each valve manifold station is listed in sequential order from left to right when facing the port side of the manifold as indicated. Example order: valve station valve station valve station 3 valve station AKJ6D0000LSTD 0BWZ3ML0006 0BWZ3ML0006 0BBZML0006 0BBZML0006 ASSEMBLED valve stations:... AKF Terminal Strip Ordered using the same method as for AKJ Example order: valve station valve station valve station 3 valve station Assembly Dimensions Single Station Valve Manifold Dimensions: Inches (mm) AKF6D0000LSTD RBWZ3ML0006 RBWZ3ML0006 RBBZML0006 RBBZML0006 ASSEMBLED valve stations:... 6 A B D E B A C F G H M K L N 6 I A B C D E F G H I J K L M N 3.08 (78.).6 (67.) 0.6 (.).78 (70.5) 3.5 (89.) 0.39 (9.9) 0.95 (.95) J.0 (6.0) 0. (0.5) 0.06 (5.30) 0.7 (6.9) 0.8 (0.6).55 (6.8). (30.7)

17 FlexiBlok Assembly Dimensions: Inches (mm) 5 pin Sub-D Housing Assembly Terminal Strip Housing Assembly A B C D E F G H I J K L M N O P 3.5 (89.) 0.7 (8.0).8 (30.0) 0.6 (.9).3 (58.7).88 (7.8) 0.93 (3.6) 0.37 (9.) 0.5 (.) 0.68 (7.3) 0. (0.5) 0.56 (.).50 (38.) 0. (.) 0.7 (6.9) 0.5 (3.0) Q R S T U V W X Y Z AA BB CC DD EE FF 0.8 (0.6) 0.96 (.).08 (7.).6 (.7).0 (6.0) 0.36 (9.) 0.5 (3.0).08 (7.).6 (.7) 3.50 (88.9) 0.3 (0.9) 0.56 (.).50 (38.).3 (58.7) 0.85 (.6).50 (38.) 7

18 Manifold Block Assemblies Req'd Part Name Part Shroud, White (Double) Shroud, Black (Single) Stud Gasket (Body) 3-56 Blocking Gasket Clip (Fitting) Manifold Gasket (Manifold) Push-in (/ Tube) Push-in (/8 Tube) Push-in (mm Tube) Push-in (6mm Tube) 3-99 Black Shroud = Single White Shroud = Double Plug color visible from top of manifold block. Manifold Description /8 Push-In / Push-In 5/3-mm Push-In 6mm Push-In Single Z-board Double Z-board w/o Z-board N/A Internal/External Pilot Selection Pilot Supply Gasket #3-55 Internal Pilot Orientation External Pilot Orientation Note: Gasket #3-58 Pilot Supply Gasket #3-55 8

19 DIN Rail Clamp Kit Blocking Discs Req'd Part Name Part Screw 7-7 Spring Clamp 5-70 B A Port Part A B / Interchangeable Cartridge Fittings and Port Plugs Push-in Fittings Barbed Fittings Size Ports Part mm (5/3") Ports,, X, XE mm Ports,, X, XE 3-99 /8" Ports,, X, XE /" Ports,, X, XE mm (5/6") Ports, 3/ /" Ports, 3/ Size Ports Part /8" Ports,, X, XE /" Ports,, X, XE /6" Ports, 3/ Port Plugs Size Ports Part Large Ports, 3/ Small Ports,

20 Solenoid Pilot Valve Assemblies Non-Locking Override Locking Override VDC Part VDC Part Solenoid Control Board Circuit Diagrams - J- - J- J3- J- - SOL - SOL + J- J- + COMM + J-3 C J- J3- + SOL + SOL - J- C J- - End End Valve Unit Pin Out Solenoid Board Encapsulation Assembly Spring Cover Pilot Adaptor comm Complete elimination of internal wiring! Description End End

21 Blank Station Plate Kit Req'd Part Name Part Screw 7-8 Gasket Blank Station Plate Mid-Station Supply and Exhaust Block Port Type Part. / mm Req'd Part Name Part Transfer Board Ass y Screw Stud Blank Station Plug Gasket Mid Station Plate Blocking Gasket Clip (Fitting) Gasket (Manifold) Cartridge (6mm tube) 3-99 End Plate Kits Port Type PORT PORT SIZE 7 6 Kit w/o muffler, w/o DIN Rail Kit w/o muffler, w/ DIN Rail Kit w/ muffler, w/o DIN Rail Kit w/ muffler, w/ DIN Rail 7 / 8 3 Push-In 3/5 / X, XE 5/ mm 5 3/5 5 Push-In 8mm DIN rail option only X, XE 8mm Req'd Part Name Part Gasket 3-58 Gasket Fitting Clip Push-in Fitting See p. 9 5 Push-in Fitting See p. 9 6 Gasket LH End Plate Gasket Lockwasher RH End Plate RH Mounting Cover Screw End Plate Cover Screw Screw Muffler (optional) Vented Cover (optional) Exhaust Plug (optional) Screw Spring Clamp 5-70

22 Req'd Part Name Part Housing Transfer Connector Hex Screw 7-85 Gasket Screw Sub-D Board Ass y Screw Lockwasher 8-9 DIN rail option only SUB-D CONNECTOR SHELL SIZE 3 5 POSITION PINS - OUTPUTS 9 Screw Spring Clamp 5-70 Clamp -057 PINS 3- COMMON Sub-D Housing Kits Part With DIN Rail Without DIN Rail PIN 5 EARTH GROUND Terminal Strip Housing Assembly Kit Req'd Part Name Part LH DIN Rail Mtg Cover Gasket Cover Strap 5-77 Stick Screw Cover Gasket Screw Screw Lockwasher Transfer Connector Screw 7-79 DIN rail option only Terminal Strip Board Housing Gasket Adaptor /" NPTF *6 Adaptor Mtg. Screw Screw Spring Terminal Strip Housing Kits Part 9 Clamp 5-70 With DIN Rail Nameplate -057 Without DIN Rail *Attaches det #5, not shown for clarity.

23 0 Valve Service Kits and Parts, and 3 Position -Way Kit MK0-K (for models 00BW, 0BW, 0DBW, 0FBW) Kit MK0-K (for models 00BB, 0BB, 0DBB, 0FBB) Kit MK0-K3 (for models 00BB5, 0BB5, 0DBB5, 0FBB5, 00BB6, 0BB6, 0DBB6, 0FBB6) BW BB BB5/6 Part Name Part N/A N/A Spring Cover Ass y N/A Body (not sold separately) 3 Nameplate -059 * * 3* Gasket Pilot Adaptor Ass y * * * Gasket * * * Gasket Pilot Valve Ass y See p N/A N/A Screw Screw * N/A N/A Spring * * N/A Detent Body N/A Sleeve Ass y (BA, BB) * * * Piston * * * U-Cup Seal " Board Encap. See p Screw Pilot Adaptor N/A Pilot Adaptor Ass y N/A " - " Encap N/A Board Encap. See p. 0 N/A * N/A Detent Assembly N/A N/A Sleeve Ass y (BB5) N/A N/A Sleeve Ass y (BB6) N/A N/A * Spring Retainer N/A N/A * Spring N/A N/A * Spring Retainer 6-50 *Indicated part included in kit

24 R Valve Service Kits and Parts, and 3 Position -Way Kit MKR-K (for models R0BW, RBW, RDBW, RFBW) Kit MKR-K (for models R0BB, RBB, RDBB, RFBB) Kit MKR-K35 (for models R0BB5, RBB5, RDBB5, RFBB5) Kit MKR-K36 (for models R0BB6, RBB6, RDBB6, RFBB6) BW BB BB5/6 Part Name Part N/A N/A Spring Cover Ass y N/A Body (not sold separately) 3 Nameplate -059 * * 3* Gasket Pilot Adaptor Ass y * * * Gasket * * * Gasket Pilot Valve Ass y See p N/A N/A Screw Screw * N/A N/A Spring * * N/A Spool Ass y (BA, BB) * * * Piston 7-38 * * * U-Cup Seal Board Encap. See p Screw Pilot Adaptor N/A N/A Pilot Adaptor Ass y N/A N/A " - " Encap N/A Board Encap. See p. 0 N/A Pilot Adaptor Ass y N/A N/A Adaptor N/A N/A Body (not sold separately) N/A N/A 3 Screw N/A N/A * Piston N/A N/A * Spring Retainer N/A N/A * Spring N/A N/A * Spring Retainer N/A N/A * Spool Ass y (BB5) N/A N/A Spool Ass y (BB6) N/A N/A " - " Encap *Indicated part included in kit

25 Kit MKR-K3A (for models R0BBA, RBBA, RDBBA, RFBBA) Kit MKR-K3D (for models R0BBD, RBBD, RDBBD, RFBBD) BW BB BB5/6 Part Name Part Pilot Valve Ass y See p. 0 Pilot Adaptor Pilot Adaptor Ass y Body (not sold separately) 5 Nameplate " - " Encap * * * Gasket Pilot Adaptor Ass y * * * Gasket * * * Gasket 3-53 Board Encap. See p. 0 Screw * * * Spring 5-36 * * * Bumper * N/A * Spool Ass y (N.O.) Board Encap. See p Screw N/A * * Spool Ass y (N.O.) -79 *Indicated part included in kit Kit MKR-K3C (for models R0BBC, RBBC, RDBBC, RFBBC)

26 World Class Supplier of Pneumatic Components World Headquarters USA Numatics, Incorporated 680 Dylan Drive Novi, Michigan 8377 P: F: Canada Numatics, Ltd P: F: México - Ascomatica SA de CV P: (DF y Area metropolitana) P: ASCO (76) (Interior de la República) F: Brazil Ascoval Ind.e Comercio Ltda P: (55) F: (55) LT-00Series Rev 03/.5M-TGI-0/09 Numatics Inc Numatics is registered in the United States and elsewhere Numatics, Inc. Tel (8) insidesales@numatics.com