BROWNING.50 M2 MACHINE GUN, ASSEMBLY

Transcription

1 Parts Catalog BROWNING.50 M2 MACHINE GUN, ASSEMBLY Page 1 DEC 2016 PCOOWM2HB phone: fax: web: ohioordnanceworks.com

2 OOW M2 Configurations M2 HB SKU: M2 QCB SKU: M2A1-100E Page 1

3 Table of Contents Receiver and Parts Assembly...3 Parts breakdown for Receiver And Parts Assembly...4 QCB Configuration Parts... 5 Parts breakdown for QCB Configuration Parts...6 HB Configuration Parts...7 Parts breakdown for HB Configuration Parts...8 Breech Bolt Assembly...9 Parts breakdown for Breech Bolt Assembly...10 Cover Assembly...11 Parts breakdown for Cover Assembly...12 Recoil Mechanism Buffer Assembly...13 Parts breakdown for Recoil Mechanism Buffer Assembly...14 Retracting Slide Assembly...15 Parts breakdown for Retracting Slide Assembly...16 Back Plate Assembly...17 Parts breakdown for Back Plate Assembly...18 M2. 50 Accessory Kit...19 Parts breakdown for M2. 50 Accessory Kit...20 Operators Manual (HB)...21 Technical Manual (HB)...22 Operators Manual (QCB)...23 Technical Manual (QCB)...24 Firearms Training and Instruction...25 Part Reference...26 Page 2

4 FIGURE 1. RECEIVER AND PARTS ASSEMBLY FOR ALL CONFIGURATIONS Page 3

5 Item Part NSN (EQUIVALENT) Description PARTS BREAKDOWN TABLE FOR FIGURE 1. RECEIVER AND PARTS ASSEMBLY FOR ALL CONFIGURATIONS Page 4 Configuration HB QCB RECEIVER ASSEMBLY X X SIGHT ASSEMBLY, REAR X X SCREW, MACHINE X X A445 PIN, COTTER, 3/32 X 1-1/4 X X PIN, STRAIGHT, HEADED X X SPRING, HELICAL, COMPRESSION X X PAWL, COVER DETENT X X SWITCH, EXTRACTOR X X SPRING, SWITCH X X NUT, SLOTTED, HEXAGON X X SPRING, HELICAL COMPRESSION X X NUT, BOLT LATCH ROD X X ROD, BOLT LATCH X X A427 PIN, COTTER, 1/16 X 1-1/2 X X PLUNGER, BOLT LATCH X X SPRING, HELICAL COMPRESSION X X PIN, STRAIGHT X X BOLT LATCH, ADJUSTABLE X X PIN, BELT HOLDING PAWL X X SPRING, HELICAL COMPRESSION X X PAWL, BELT HOLDING, RH X X SLEEVE BELT HOLDING PAWL X X PAWL, BELT HOLDING, LH X X COVER, FRONT SIGHT X X SIGHT, FRONT BLADE TYPE X X PIN, STRAIGH, HEADLESS X X PA PEEL AWAY SHIM, TRUNNION BLOCK X X BUSHING, MACHINE THREAD X X SCREW, LOCK, BREECH BEARING X X STRIPPER, LINK X X STOP, REAR, CARTRIDGE X X STOP, FRONT, CARTRIDGE X X SPRING, HELICAL, COMPRESSION X X PIN, SHOULDER, HEADLESS X X CARTRIDGE STOP ASSY. RH (REAR) X X SCREW, BREECH LOCK CAM X X NUT, PLAIN, SLOTTED HEXAGON X X SPRING, LOCKING, ELEVATING MEC X X PIN, SHOULDER, HEADLESS X X BREECH LOCK CAM X X A481 PIN, COTTER, 1/8 X 2-1/2 X X STOP, ADJUSTING TRIGGER LEVER X X BAR, TRIGGER X X PIN, STRAIGHT, HEADED TRIGGER X X PIN ASSEMBLY, BREECH LOCK X X ROD ASSEMBLY, DRIVE X X

6 FIGURE 2. QCB CONFIGURATION PARTS FOR QCB CONFIGURATION Page 5

7 Item Part NSN (EQUIVALENT) Description Configuration HB QCB QCB BARREL ASSY., M2.50 QCB X QCB BREECH LOCK, #5 - #31 X QCB BARREL EXTENSION, ASSY, QCB X WASHER, GUIDE SCREW, QCB X SCREW, GUIDE, QCB X BARREL SUPPORT, QCB X QCB NUT, TIMING, QCB X QCB SCREW, LOCKING, TIMING NUT X CARRYING HANDLE ASSEMBLY, QCB X QCB SPRING, LOCKING, BARREL X PARTS BREAKDOWN TABLE FOR FIGURE 2. QCB CONFIGURATION PARTS FOR QCB CONFIGURATION Page 6

8 FIGURE 3. HB CONFIGURATION PARTS FOR HB CONFIGURATION (Assembled View) Page 7

9 Item Part NSN (EQUIVALENT) Description HB EXTENSION ASSEMBLY, BARREL X SUPPORT, BARREL X M2. 50 CAL BARREL ASSEMBLY X CARRYING HANDLE ASSEMBLY, QCB X SCREW, EXTERNALLY RELIEVED BOD X NUT, PLAIN, KNURLED X SPRING, FLAT, ADJUSTABLE TRIGGER X LOCK, BREECH X SPRING, LOCKING, BARREL X Configuration QCB PARTS BREAKDOWN TABLE FOR FIGURE 3. HB CONFIGURATION PARTS FOR HB CONFIGURATION Page 8

10 FIGURE 4. BREECH BOLT ASSEMBLY FOR ALL CONFIGURATIONS (Assembled View) Page 9

11 Item Part NSN (EQUIVALENT) Description Configuration HB QCB BOLT SUB-ASSEMBLY X X KNOB ALTERNATE FEED X X LEVER, BREECHLOCK X X PIN, COCKING LEVER, M2 X X SEAR X X SLIDE, SEAR X X PIN, FIRING X X STOP, GUN, AUTOMATIC X X SPRING, HELICAL COMPRESSION X X EXTENSION ASSEMBLY, FIRING PIN X X EXTENSION, FIRING PIN X X PIN, STRAIGHT, HEADLESS X X SPRING, HELICAL, COMPRESSION X X EXTRACTOR, CARTRIDGE X X LOCK, ACCELERATOR STOP X X BOLT ASSEMBLY, BREECH X X PARTS BREAKDOWN TABLE FOR FIGURE 4. BREECH BOLT ASSEMBLY FOR ALL CONFIGURATIONS Page 10

12 FIGURE 5. COVER ASSEMBLY FOR ALL CONFIGURATIONS (Assembled View) Page 11

13 Item Part NSN (EQUIVALENT) Description Configuration COVER SUB-ASSEMBLY X X LATCH X X WASHER, FLAT X X 4 MS PIN, COTTER X X LEVER, MANUAL CONTROL COVER LATCH X X SPRING, FLAT COVER LATCH X X PIN, SHOULDER, HEADLESS X X SPRING, FLAT, COVER EXTRACTOR X X SPRING, HELICAL, COMPRESSION X X LEVER X X PIN, LOCK RETAINING, BELT FEED X X SPRING, HELICAL COMPRESSION X X PAWL, BELT FEED ARM X X PAWL, BELT, FEED X X PIN, SPRING X X ASSY., SLIDE X X COVER ASSEMBLY X X HB QCB PARTS BREAKDOWN TABLE FOR FIGURE 5. COVER ASSEMBLY FOR ALL CONFIGURATIONS Page 12

14 FIGURE 6. RECOIL MECHANISM BUFFER ASSEMBLY FOR ALL CONFIGURATIONS (Assembled View) Page 13

15 Item Part NSN (EQUIVALENT) Description Configuration BODY ASSEMBLY, BARREL BUFFER X X ACCELERATOR, MACHINE, BUFFER X X PIN, SPRING X X GUIDE, BUFFER SPRING X X SPRING, HELICAL, COMPRESSION X X BUFFER ASSEMBLY, BARREL X X BUFFER BODY, LOCK X X BUFFER, RECOIL MECHANISM X X HB QCB PARTS BREAKDOWN TABLE FOR FIGURE 6. RECOIL MECHANISM BUFFER ASSEMBLY FOR ALL CONFIGURATIONS Page 14

16 FIGURE 7. RETRACTING SLIDE ASSEMBLY FOR ALL CONFIGURATIONS (Assembled View) Page 15

17 Item Part NSN (EQUIVALENT) Description Configuration HB QCB BRACKET, RETRACTING SLIDE X X BOLT, TEE HEAD SHOULDER X X STUD, SHOULDERED X X PIN, SHOULDER, HEADLESS X X SLIDE, RETRACTING X X SPRING, HELICAL, COMPRESSION X X PLUNGER, RETRACTING SLIDE X X PIN, STRAIGHT, HEADLESS X X 9 MS PIN, COTTER X X NUT, SLOTTED, HEXAGON X X SPRING, HELICAL TORSION X X SPRING, HELICAL TORSION X X SCREW, SHOULDER X X HANDLE, RETRACTING SLIDE X X LEVER, REMOTE CONTROL SLIDE X X WASHER, FLAT, THRUST X X M2.50 RETRACTING SLIDE ASSY. X X PARTS BREAKDOWN TABLE FOR FIGURE 7. RETRACTING SLIDE ASSEMBLY FOR ALL CONFIGURATIONS Page 16

18 FIGURE 8. BACK PLATE ASSEMBLY FOR ALL CONFIGURATIONS (Assembled View) (Assembled View) Page 17

19 Item Part NSN (EQUIVALENT) Description Configuration PLATE ASSEMBLY, BACK W/O LATCH X X TUBE, HANDLE GRIP PLATE ASSEMBLY X X GRIP, MACHINE GUN HANDLE, PLASTIC X X SCREW, MACHINE X X PIN, STRAIGHT, HEADLESS X X SPRING, HELICAL COMPRESSION X X LATCH, BACK PLATE X X PIN, STRAIGHT, HEADED X X SPRING, FLAT BACK PLATE X X LOCK, BACK PLATE LATCH X X PIN, LOCK X X PIN, SHOULDER, HEADLESS X X KEY, WOODRUFF X X SPRING, HELICAL COMPRESSION X X TUBE, METALLIC X X PLUG, MACHINE THREAD X X DISK, SOLID, PLAIN RED FBR X X BUFFER, RECOIL MECHANISM X X RELEASE, BOLT LATCH X X TRIGGER X X SPRING, HELICAL, COMPRESSION X X TRIGGER BLOCK X X SCREW X X SPRING X X S BACK PLATE WITH SAFETY X X HB QCB PARTS BREAKDOWN TABLE FOR FIGURE 8. BACK PLATE ASSEMBLY FOR ALL CONFIGURATIONS Page 18

20 FIGURE 9. M2.50 ACCESSORY KIT FOR ALL CONFIGURATIONS Page 19

21 Item Part Description Quantity 1A HEADSPACE AND TIMING GAGE SET (M2HB) 1 1B , , HEADSPACE AND TIMING GAGE SET (M2HB-QCB) , , MITTEN, HEAT PROTECTIVE ALL PURPOSE BRUSH CLEANING ROD T-HANDLE CHAMBER BRUSH PATCHES, CLEANING 1 8 PLASTILUBE PLASTILUBE CLEANING KIT, POUCH BORE BRUSH 2 11 LP OR CLP (MAY VARY) LUBRICANT / PRESERVATIVE EXTRACTOR, RUPTURED CARTRIDGE WRENCH 3/4-7/ HANDLE, BOLT 1 PARTS BREAKDOWN TABLE FOR FIGURE 9. M2.50 ACCESSORY KIT FOR ALL CONFIGURATIONS Page 20

22 FIGURE 10. OPERATORS MANUAL FOR HB CONFIGURATION P/N: OM-OOW Page 21

23 FIGURE 11. TECHNICAL MANUAL FOR HB CONFIGURATION P/N: TM-OOW Page 22

24 FIGURE 12. OPERATORS MANUAL FOR QCB CONFIGURATION P/N: OM-OOW M2A1-100E Page 23

25 FIGURE 13. TECHNICAL MANUAL FOR QCB CONFIGURATION P/N: TM-OOW M2A1-100E Page 24

26 Firearms Training and Instruction Ohio Ordnance Works, Inc. (OOW) offers training services for both individuals and classroom sized groups. Training is available for any weapon system and features both Operator and Armorer Level courses. Classes normally take two days of classroom instruction and one day at the range. Length of classes may vary depending on group size and type of instruction. Some areas covered in the Operator Level Training include: Major Components Equipment Data Troubleshooting Procedures Field Stripping & Reassembly Cleaning Ammunition Front Sight Adjustment Some areas covered in the Armorer Level Training include: Major Components Equipment Data Disassembly & Reassembly Inspection & Repair Function Testing Cleaning Stoppage Testing Using the Tech Manual Call for quote and to schedule your training. Page 25

27 Part Reference Part Description WASHER, FLAT MITTEN, HEAT PROTECTIVE BUFFER BODY, LOCK PIN, STRAIGHT, HEADED PIN, STRAIGHT, HEADLESS SPRING, HELICAL COMPRESSION SPRING, HELICAL COMPRESSION SPRING, HELICAL COMPRESSION SPRING, HELICAL COMPRESSION SPRING, HELICAL COMPRESSION TUBE, HANDLE GRIP PLATE ASSEMBLY PIN, STRAIGHT, HEADLESS SCREW, MACHINE SPRING, HELICAL COMPRESSION PIN, SHOULDER, HEADLESS PIN, SHOULDER, HEADLESS SPRING, HELICAL, COMPRESSION PIN, STRAIGHT PLUNGER, BOLT LATCH SPRING, HELICAL COMPRESSION NUT, BOLT LATCH ROD SPRING, HELICAL COMPRESSION SCREW, LOCK, BREECH BEARING STOP, FRONT, CARTRIDGE STOP, REAR, CARTRIDGE STRIPPER, LINK PIN, STRAIGHT, HEADLESS NUT, SLOTTED, HEXAGON 1 Figure No. Part Description PIN, SHOULDER, HEADLESS SPRING, HELICAL, COMPRESSION PIN, STRAIGHT, HEADED BOLT, TEE HEAD SHOULDER NUT, SLOTTED, HEXAGON PIN, STRAIGHT, HEADLESS SPRING, HELICAL TORSION SPRING, HELICAL TORSION SPRING, HELICAL, COMPRESSION PIN, SHOULDER, HEADLESS WASHER, FLAT, THRUST SPRING, LOCKING, ELEVATING MEC PLUG, MACHINE THREAD DISK, SOLID, PLAIN RED FBR PIN, SHOULDER, HEADLESS BUFFER, RECOIL MECHANISM SCREW, BREECH LOCK CAM NUT, PLAIN, SLOTTED HEXAGON SCREW, MACHINE KEY, WOODRUFF HEADSPACE AND TIMING GAGE SET (M2HB) SLIDE, SEAR CLEANING KIT, POUCH BOLT LATCH, ADJUSTABLE KNOB ALTERNATE FEED SEAR RELEASE, BOLT LATCH COVER SUB-ASSEMBLY 5 Figure No. Page 26

28 Part Description EXTENSION ASSEMBLY, BARREL SUPPORT, BARREL TUBE, METALLIC ACCELERATOR, MACHINE, BUFFER CLEANING ROD LEVER ROD ASSEMBLY, DRIVE PLATE ASSEMBLY, BACK W/O LATCH CARTRIDGE STOP ASSY. RH (REAR) HANDLE, BOLT GUIDE, BUFFER SPRING PIN ASSEMBLY, BREECH LOCK PIN, SPRING PAWL, BELT FEED ARM TRIGGER ROD, BOLT LATCH BUSHING, MACHINE THREAD LATCH SPRING, FLAT COVER LATCH SIGHT, FRONT BLADE TYPE COVER, FRONT SIGHT SPRING, SWITCH EXTENSION, FIRING PIN LATCH, BACK PLATE EXTRACTOR, CARTRIDGE PAWL, BELT, FEED PIN, SPRING EXTENSION ASSEMBLY, FIRING PIN PLUNGER, RETRACTING SLIDE SCREW, SHOULDER LEVER, BREECHLOCK 4 Figure No. Part Description SPRING, FLAT, COVER EXTRACTOR SPRING, HELICAL, COMPRESSION LEVER, REMOTE CONTROL SLIDE SWITCH, EXTRACTOR BOLT SUB-ASSEMBLY BREECH LOCK CAM SLIDE, RETRACTING SPRING, FLAT BACK PLATE BAR, TRIGGER ASSEMBLY, SLIDE HANDLE, RETRACTING SLIDE STUD, SHOULDERED COVER ASSEMBLY BOLT ASSEMBLY, BREECH T-HANDLE RECEIVER ASSEMBLY EXTRACTOR, RUPTURED CARTRIDGE SLEEVE BELT HOLDING PAWL SPRING, HELICAL COMPRESSION LOCK, ACCELERATOR STOP STOP, GUN, AUTOMATIC LOCK, BREECH PIN, BELT HOLDING PAWL GRIP, MACHINE GUN HANDLE, PLASTIC M2. 50 CAL BARREL ASSEMBLY SPRING, LOCKING, BARREL BUFFER, RECOIL MECHANISM BODY ASSEMBLY, BARREL BUFFER PIN, FIRING NUT, PLAIN, KNURLED 3 Figure No SCREW, EXTERNALLY RELIEVED BOD 3 Page 27

29 Part Description SPRING, FLAT, ADJUSTABLE TRIGGER STOP, ADJUSTING TRIGGER LEVER PIN, COCKING LEVER, M PIN, LOCK LEVER, MANUAL CONTROL COVER LATCH PIN, LOCK RETAINING, BELT FEED SPRING, HELICAL, COMPRESSION PAWL, COVER DETENT PAWL, BELT HOLDING, LH PAWL, BELT HOLDING, RH PIN, STRAIGHT, HEADED TRIGGER T-HANDLE BUFFER ASSEMBLY, BARREL 6 Figure No CARRYING HANDLE ASSEMBLY, QCB 2, BARREL SUPPORT, QCB SCREW, GUIDE, QCB WASHER, GUIDE SCREW, QCB M2.50 RETRACTING SLIDE ASSEMBLY BRACKET, RETRACTING SLIDE LOCK, BACK PLATE LATCH PLASTILUBE SIGHT ASSEMBLY, REAR TRIGGER BLOCK SPRING SCREW HEADSPACE AND TIMING GAGE SET (QCB) CHAMBER BRUSH WRENCH 3/4-7/ QCB BREECH LOCK, #5 - # HEADSPACE AND TIMING GAGE SET (QCB) 9 Part Description HEADSPACE AND TIMING GAGE SET (QCB) HEADSPACE AND TIMING GAGE SET (QCB) QCB BARREL EXTENSION, ASSEMBLY QCB PA PEEL AWAY SHIM, TRUNNION BLOCK S BACK PLATE WITH SAFETY QCB BARREL ASSEMBLY, M2.50 QCB QCB SPRING, LOCKING, BARREL QCB NUT, TIMING, QCB QCB SCREW, LOCKING, TIMING NUT ALL PURPOSE BRUSH A427 PIN, COTTER, 1/16 X 1-1/ A445 PIN, COTTER, 3/32 X 1-1/ A481 PIN, COTTER, 1/8 X 2-1/2 1 LP OR CLP LUBRICANT / PRESERVATIVE 9 MS PIN, COTTER 5 MS PIN, COTTER 7 Figure No. OM-OOW M2A1-100E OPERATOR S MANUAL (QCB) 12 OM-OOW M2A1-100E TECHNICAL MANUAL (QCB) 13 OM-OOW OPERATOR S MANUAL (HB) 10 PLASTILUBE PATCHES, CLEANING 9 TM-OOW TECHNICAL MANUAL (HB) 11 Page 28

30 Manufacturer of Destructive Devices Importer of Destructive Devices Manufacturer and Exporter with the U.S. Department of State Broker with the U.S. Department of State Importer of U.S. Munitions Import List Articles Cage Code: 1V2A7 NOTABLE CUSTOMERS INCLUDE: THE UNITED STATES DEPARTMENT OF STATE THE DEPARTMENT OF HOMELAND SECURITY THE UNITED STATES DEPARTMENT OF ENERGY THE UNITED STATES ARMY THE UNITED STATES MARINE CORPS THE UNITED STATES NAVY THE UNITED STATES AIR FORCE BRITISH AERO-SPACE WEAPON SIMULATION COMPANIES PRIVATE SECURITY COMPANIES TACTICAL TRAINING COMPANIES VARIOUS U.S. DEPARTMENT OF STATE/ NATO APPROVED FOREIGN COUNTRIES Ohio Ordnance Works, Inc. PO Box 687, Chardon, Ohio phone: fax: business hours: monday thru friday, 8am to 5pm sales inquiries: general: web: Source Code: PCOOW240CO Page 29