HIGH FLOW SOLENOID VALVES

Transcription

1 P PRODUCT ROCHURE HIGH FLOW SOLENOID VLVES HIGH FLOW IN COMPCT DESIGN

2 TLE OF CONTENTS High Flow Solenoid Valves 9 How to ccessorize Product Features 9 ase Plate Options and ccessories Features and enefits How to Order How to Specify 7 8 0mm Solenoid Valves mm Solenoid Valves 0mm ases and Manifolds mm ases and Manifolds

3 HIGH FLOW 0MM ND MM SOLENOID VLVES Pneumadyne recently expanded their 0mm and mm solenoid offering to include a high flow configuration. Designed for use in high flow, low pressure applications, these -Way valves are available with or V DC coils. Convenient Line or 90 connectors provide quick electrical connection when used in conjunction with the plugin cable (sold separately). The Flying Leads feature 00mm wires for direct connection and a Spade Connector is available for added versatility. To accommodate installation and plumbing requirements, High Flow single bases and multiple-station manifolds have been designed for use with both the 0mm and mm style valves. For Technical ssistance:

4 PRODUCT FETURES FETURES ND ENEFITS -Way Normally Closed Designed for high flow, low pressure applications & Volt DC Coil Normally Closed -Way LED standard Compact size Rugged, reliable, and consistent Performance Data 0 mm mm Nominal orifice size Ø (mm). mm.0 mm.0 mm Working pressure (PSI) 0 -. PSI 0 -. PSI 0 -. PSI Flow rate PSI.0 PSI Flow direction Mono Mono Mono Power (watt). W. W*. W Voltage DC (volt) or V DC or V DC or V DC Voltage tolerance +/- 0% +/- 0% +/- 0% Response time (ISO 8) (msec) 8 Electrical insulation 000 V C 000 V C 000 V C Coil insulation class F F F Coil resistance tolerance +/- % +/- % +/- % Fluid/ambient temperature / F / F / F Max working frequency (Hz) Duty cycle 00% ED* 00% ED* 00% ED* Life expectancy >0 million cycles >0 million cycles >0 million cycles Mounting screws, M x screws, M x screws, M x 8 Weight.0 lbs.0 lbs.0 lbs Protection degree (IEC 09) De-energized Energized Port Designation Input Port Output Port IP (flying leads) or IP (90 or line connector) * This power is NOT rated 00% ED; an external PWM driver is recommended if used 00% ED. High Flow Solenoid Valves

5 HOW TO SPECIFY 0mm SOLENOID VLVES Flying Leads - Connector Line Connector - Connector.9..9 " Flying Leads Connector - Connector Footprint.09 MX M..9.8 X Interface ll measurements in inches, unless otherwise specified. When design makes a dimension critical contact factory for confirmation. ll dimensions shown subject to change without notice. PROPRIETRY ND CONFIDENTIL THIS DRWING ND THE DESIGN THT IT INCORPORTES RE THE PROPERTY OF PNEUMDYNE INC. ND RE TO E USED ONLY WITH THEIR CONSENT. RECIPIENT GREES THT IT RECEIVES THIS DRWING ND THE DESIGNS IN STRICT CONFIDENCE ND THT THEY SHLL NOT E REPRODUCED, COPIED OR THE CONSENT OF PNEUMDYNE INC. Voltage Connector Orifice S0MM-0HF-- S0MM-0HF-- S0MM-0HF-- S0MM-0HF--F S0MM-0HF--F S0MM-0HF--F S0MM-0HF-- S0MM-0HF-- S0MM-0HF-- S0MM-0HF--F S0MM-0HF--F S0MM-0HF--F DC DC DC DC DC DC DC DC DC DC DC DC Flying Leads 00mm 90 Connector w/ LED Flying Leads 00mm 90 Connector w/ LED Flying Leads 00mm 90 Connector w/ LED Flying Leads 00mm 90 Connector w/ LED.mm.mm.mm.0mm.0mm.0mm.mm.mm.mm.0mm.0mm.0mm SPECIFIED DIMENSIONS RE IN INCHES ND PPLY FTER FINISH. TOLERNCES RE: NGULR =.XX =.00 TOLERNCES PER: NSI Y mm HF Footprint DRWN: XXX DTE: //0 SIZE: SCLE: 8: SHEET OF For use with Pneumadyne s High Flow 0mm manifolds and bases. For Technical ssistance:

6 HOW TO SPECIFY mm SOLENOID VLVES Spade -0 Connector Flying Leads - Connector Footprint.9.9 M X.8 MX X M (depth.97). (9.). " Flying Leads SUGGESTED SUSE Line Connector - Connector 90 Connector - Connector Interface PROPRIETRY ND CONFIDENTIL THIS DRWING ND THE DESIGN THT IT INCORPORTES RE THE PROPERTY OF PNEUMDYNE INC. ND RE TO E USED ONLY WITH THEIR CONSENT. RECIPIENT GREES THT IT RECEIVES THIS DRWING ND THE DESIGNS IN STRICT CONFIDENCE ND THT THEY SHLL NOT E REPRODUCED, COPIED OR THE CONSENT OF PNEUMDYNE INC. SPECIFIED DIMENSIONS RE IN INCHES ND PPLY FTER FINISH. TOLERNCES RE: NGULR =.XX =.00 TOLERNCES PER: NSI Y.-009 SUGGESTE mm HF DRWN: JH DTE: /8/0.99 SIZE: / N.C. MONO. PNEUMTIC INTERFCE. PORT IN PORT OUT ll measurements in inches, unless otherwise specified. When design makes a dimension critical contact factory for confirmation. ll dimensions shown subject to change without notice. PROPRIETRY ND CONFIDENTIL Voltage Connector Orifice SMM-0HF--0H SMM-0HF--H SMM-0HF--H SMM-0HF--H SMM-0HF--0H SMM-0HF--H SMM-0HF--H SMM-0HF--H DC DC DC DC DC DC DC DC Spade Flying Leads 00mm 90 Connector w/ LED Spade Flying Leads 00mm 90 Connector w/ LED.0mm.0mm.0mm.0mm.0mm.0mm.0mm.0mm THIS DRWING ND THE DESIGN THT IT INCORPORTES RE THE PROPERTY OF PNEUMDYNE INC. ND RE TO E USED ONLY WITH THEIR CONSENT. RECIPIENT GREES THT IT RECEIVES THIS DRWING ND THE DESIGNS IN STRICT CONFIDENCE ND THT THEY SHLL NOT E REPRODUCED, COPIED OR THE CONSENT OF PNEUMDYNE INC. SPECIFIED DIMENSIONS RE IN INCHES ND PPLY FTER FINISH. TOLERNCES RE: NGULR =.XX =.00 TOLERNCES PER: NSI Y.-009 Pneumatic Solenoid DRWN: JH DTE: /8/0 For use with Pneumadyne s High Flow mm manifolds and bases. High Flow Solenoid Valves SIZE:

7 HOW TO SPECIFY SES ND MNIFOLDS DESCRIPTION Y Release JOS /8/0 Redesigned JOS /0/0 0mm Single ase and Manifolds 0- ports For use with Pneumadyne s High Flow Solenoid 0mm valves One to six stations nodized aluminum for corrosion resistance Mounting hole size: DTE Mounting Holes. 0- Port Port...80 PROPRIETRY ND CONFIDENTIL THIS DRWING ND THE DESIGN THT IT INCORPORTES RE THE PROPERTY OF PNEUMDYNE INC. ND RE TO E USED ONLY WITH THEIR CONSENT. RECIPIENT GREES THT IT RECEIVES THIS DRWING ND THE DESIGNS IN STRICT CONFIDENCE ND THT THEY SHLL NOT E REPRODUCED, COPIED OR THE CONSENT OF PNEUMDYNE INC. 0 luminum nodized - Clear Stations C MSV0HF- MSV0HF- MSV0HF- MSV0HF- MSV0HF- MSV0HF Multiple Station 0- ports. SPECIFIED DIMENSIONS RE IN INCHES ND PPLY FTER FINISH. TOLERNCES RE: NGULR =.XX =.00 TOLERNCES PER: NSI Y.-009 DESCRIPTION Release 0mm High Flow Manifold Y DTE JOS /8/0 MSV0HF- DRWN: JOS DTE: 0//0 SIZE: SCLE: : SHEET OF.70.0 #0- Tapped Hole. C x 0- Port..0.9 For Technical ssistance: Stations 'C' Mounting Hole Size MSV0HF- MSV0HF- MSV0HF- MSV0HF- MSV0HF PROPRIETRY ND CONFIDENTIL THIS DRWING ND THE DESIGN THT IT INCORPORTES RE THE PROPERTY OF PNEUMDYNE INC. ND RE TO E USED ONLY WITH THEIR CONSENT. RECIPIENT GREES THT IT RECEIVES THIS DRWING ND THE DESIGNS IN STRICT CONFIDENCE ND THT THEY SHLL NOT E REPRODUCED, COPIED OR THE CONSENT OF PNEUMDYNE INC. SPECIFIED DIMENSIONS RE IN INCHES ND PPLY FTER FINISH. TOLERNCES RE: NGULR =.XX =.00 TOLERNCES PER: NSI Y mm High Flow Manifolds MSV0HF-X DRWN: JOS DTE: /0/0 SIZE: SCLE: : SHEET OF 7

8 HOW TO SPECIFY SES ND MNIFOLDS DESCRIPTION Y DTE Release JOS //0 mm Single ase and Manifolds /8 NPT (F) ports For use with Pneumadyne s High Flow Solenoid mm valves One to six stations nodized aluminum for corrosion resistance Mounting hole size: Mounting Holes. /8 NPT Port..0 /8 NPT Port.7.. Stations C MSVHF- MSVHF- MSVHF- MSVHF- MSVHF- MSVHF Multiple Station /8 NPT (F) ports DESCRIPTION Y DTE Release JOS //0 PROPRIETRY ND CONFIDENTIL THIS DRWING ND THE DESIGN THT IT INCORPORTES RE THE PROPERTY OF PNEUMDYNE INC. ND RE TO E USED ONLY WITH THEIR CONSENT. RECIPIENT GREES THT IT RECEIVES THIS DRWING ND THE DESIGNS IN STRICT CONFIDENCE ND THT THEY SHLL NOT E REPRODUCED, COPIED OR THE CONSENT OF PNEUMDYNE INC.. SPECIFIED DIMENSIONS RE IN INCHES ND PPLY FTER FINISH. TOLERNCES RE: NGULR =.XX =.00 mm High Flow Manifold TOLERNCES PER: NSI Y.-009 MSVHF- DRWN: JOS DTE: 0//0 SIZE: SCLE: : SHEET OF.8.0 /8 NPT Port.0 C x /8 NPT Port Stations "C" MSVHF-..0 Mounting Hole Size MSVHF- MSVHF- MSVHF- MSVHF PROPRIETRY ND CONFIDENTIL THIS DRWING ND THE DESIGN THT IT INCORPORTES RE THE PROPERTY OF PNEUMDYNE INC. ND RE TO E USED ONLY WITH THEIR CONSENT. RECIPIENT GREES THT IT RECEIVES THIS DRWING ND THE DESIGNS IN STRICT CONFIDENCE ND THT THEY SHLL NOT E REPRODUCED, COPIED OR THE CONSENT OF PNEUMDYNE INC. SPECIFIED DIMENSIONS RE IN INCHES ND PPLY FTER FINISH. TOLERNCES RE: NGULR =.XX =.00 TOLERNCES PER: NSI Y.-009 mm High Flow Manifolds MSVHF-X DRWN: JOS DTE: /8/0 SIZE: SCLE: : SHEET OF High Flow Solenoid Valves

9 HOW TO CCESSORIZE SE PLTE OPTIONS ND CCESSORIES For added installation versatility, individual bases are available for direct mount to the 0mm and mm high flow solenoid valves. Two sets of screws are included with the base to fasten to the valve, as well as a machine member if required. Manufactured from P nylon, the barbs are recommended for use with mm and mm OD polyurethane tubing. DESCRIP ase Plate 0mm / HF S0P-HF X RELE VLVE MOUNTING HOLES F. x SELF TPPING SCREWS INCLUDED.079 Includes: F. x self-tapping screws (valve fixing) M.7 x screws for base fixing SE MOUNTING HOLES M.7 x 7 SCREWS INCLUDED.7. TUE Ø OUT mm / IN.mm. PROPRIETRY ND CONFIDENTIL.070 Includes:. X ase Plate mm / HF SP-HF VLVE MOUNTING HOLES F x 0 SELF TPPING SCREWS INCLUDED.8.9 F x 0 self-tapping screws (valve fixing) M x 8 screws for base fixing THIS DRWING ND THE DESIGN THT IT INCORPORTES RE THE PROPERTY OF PNEUMDYNE INC. ND RE TO E USED ONLY WITH THEIR CONSENT. RECIPIENT GREES THT IT RECEIVES THIS DRWING ND THE DESIGNS IN STRICT CONFIDENCE ND THT THEY SHLL NOT E REPRODUCED, COPIED OR THE CONSENT OF PNEUMDYNE INC. SPECIFIED DIMENSIONS RE IN INCHES ND PPLY FTER FINISH. TOLERNCES RE: NGULR =.XX =.00 TOLERNCES PER: NSI Y.-009 DRWN: MLH DTE: DE SE MOUNTING HOLES M X 8 SCREWS INCLUDED. TUE Ø OUT mm / IN mm. PROPRIETRY ND CONFIDENTIL.8.7 THIS DRWING ND THE DESIGN THT IT INCORPORTES RE THE PROPERTY OF PNEUMDYNE INC. ND RE TO E USED ONLY WITH THEIR CONSENT. RECIPIENT GREES THT IT RECEIVES THIS DRWING ND THE DESIGNS IN STRICT CONFIDENCE ND THT THEY SHLL NOT E REPRODUCED, COPIED OR THE CONSENT OF PNEUMDYNE INC. Valve ccessories Description SMMC-00 SMMC-00 SMMC-000 SMM-DIN SMM-MDIN S0P-HF SP-HF Plug-in Cable 00mm Plug-in Cable 00mm Plug-in Cable 000mm DIN (mm only) Molded DIN (mm only) ase Plate for 0mm Valves ase Plate for mm Valves mm base plate with valve attached For Technical ssistance: SPECIFIED DIMENSIO IN INCHES ND PP FINISH. TOLERNCE NGULR =.XX =.00 INTERPRET GEOME TOLERNCES PER: NSI Y.-009 DRWN: MLH

10 HOW TO ORDER The model number for all solenoid valves consists of alphanumeric clusters that designate actuator, function, first position, voltage, connectors, and orifice size. The 0mm example below is a -way, normally closed, V DC high flow solenoid valve with flying leads and a.mm Ø orifice. CTUTOR POSITION ONE Solenoid, 0mm 0 Normally Closed Solenoid, mm Normally Open FLOW HF CONNECTORS High Flow 0 Spade Flying Leads 00mm Solenoid, System Solenoid, System 8 90 Connector w/ LED S0MM - 0HF - - FUNCTION ORIFICE VOLTGE -Way -Way W V DC.mm V DC ( Watt).mm V DC D.mm LW V DC (0. Watt) E 0.8/.mm W V DC ( Watt) F.0mm 0 0/0V C H.0mm 0 0/0V C C V C Not all configurations are possible. Please using part number listings on pages - to verify part numbers. 0 High Flow Solenoid Valves

11 NOTES For Technical ssistance:

12 Your stocking distributor is: Pneumadyne Inc. imba Manufacturing rd venue North Plymouth, Minnesota 7 0 S. Governors Hwy University Park, Illinois 08 Phone: Toll Free: Fax: Phone: Toll Free: 800--IM Fax: sales@pneumadyne.com cs@bimba.com Copyright 0 imba Manufacturing Company. PND-HFR- Effective November 0. ll Rights Reserved.