Hydrochloric Acid Inlet Y Strainer - Recommended for Diaphragm Pump systems.

Transcription

1 roseries s CHEM-FEED s Engineered Skid Systems by Blue-White Industries, Ltd. Industries,Ind. Ltd. CHEM-FEED s CFS Single pump and dual pump systems Strong, lightweight polyester powder coated welded aluminum structure Efficient, small footprint design Flow indicator Drip containment tray Stainless Steel mounting pads Field replaceable components Can be shipped via US Dual pump model number CFS-2AA-AAAAAA Shown with Flex-ro pump sold separately Single pump model number CFS-1AA-AAAAAA Shown with Chem-ro pump sold separately Complete the system by ordering any of the following roseriess metering pumps: Flex-ros A2, A3 or A4 series eristaltic Metering ump with Integral Controller Chem-ros C2 or C3 series Diaphragm Metering ump with Integral Controller Applications: Chem-Feed Skid System Features: metering Chlorination Fluoridation Chem-Feed Engineered Skid Systems were designed and engineered using solid modeling tools for superior piping installation and easy component maintenance. Custom engineered universal mounting blocks and pre-machined mounting slots provide for easy component servicing and replacement. Lightweight for wall of floor mounting. Each factory built and tested system includes the following standard components: otassium ermanganate ressure Relief Valve - rotects the system from over-pressurization, psi setting range, 150 psi maximum system pressure. Alum Check Valve - rotects the user from back-flow during pump maintenance. Sodium Bisulfite / Bisulfate Hydrochloric Acid Inlet Y Strainer - Recommended for Diaphragm ump systems. olymers Calibration Cylinder - Confirm pump output under system conditions. Specify cylinder volumes from 1.6 GH to. Caustics Flocculants ulsation Dampener - rotect the system components from pulsation. Recommended for diaphragm pump systems. Flow Indicator - rovides a visual indication of chemical movement through the system. The following optional components are available for specification (see the ordering matrix): ressure Gauge with Guard - Isolate and protect the system pressure gauge. Specify pressure ranges from 0-30 psi, 0-100psi, or psi. Flow Verification Sensor - rovides an electronic pulse to the pump to verify chemical movement through the system. Blue-White R Industries, Ltd Business Drive, Huntington Beach, CA Tel: Fax: sales@blue-white.com

2 Specifications: Skid ly resistant polyester powder coated 6061 T6 aluminum. Welded joint construction. ump (sold separately) Flex-ro model A2, A3 or A4 peristaltic pumps or Chem-ro model C2 or C3 diaphragm pump. See page 6 for metering pump data. iping VC or CVC Schedule 80. Tubing (T) Reinforced braided VC, 200 si max, meets NSF std. 51. The pump inlet and outlet flexible tubing connections are terminated to half unions and secured to the barbed fitting with stainless steel clamps. The calibration cylinder fill tube connections are secured to the barbed connectors with stainless steel clamps. Tubing clamps 300 series SS band, 400 series SS screw Unions (U) VC or CVC body, schedule 80, Viton seals (optional EDM) Ball valves (V) Vented type ball, True unions, VC or CVC body, TFE shaft bearings and seats, Viton seals (optional EDM) ressure Relief Valve (RV) VC body (optional VDF and TFE), TFE primary diaphragm seal. Nonwetted components: Viton secondary seal, zinc plated steel spring(s), stainless steel external hardware, HDE pressure adjusting screw and locknut. Infinite adjustment from 5-50 psi (single spring) or 51- psi (dual springs). 1/8 F/NT outlet safety vent. Calibration Cylinder (CC) VC, olypropylene, or glass body, VC units have VC end caps, olypropylene and Glass units have CVC end caps, 1/4 ID tubing outlet vent. Available volumes: 1.6 GH (100ml), 4 GH (250ml), 8 GH (500ml), 16 GH (1000ml), (2000ml). ulsation Dampener (D) CVC body,10 cubic inch volume, Viton bladder (optional EDM bladder) Gauge w/guard (G) Gauge: liuid filled stainless steel with blowout plug, bottom mount, 1/4 NT theads. Available pressure ranges: 0-30 psi, 0-100, psi, psi. Guard: VC or CVC body, TFE diaphragm seal, temperature compensated oil filled. Check Valve (CV) VC or CVC body, Viton diaphragm (optional EDM). Cracking pressure: psi. Maximum working pressure: inlet = 150 psi, back = 100 psi. Flow Indicator (F) Machined cast acrylic, VC or CVC connections, ceramic ball, polypropylene ball stop, VC or CVC half unions, viton seals (optional EDM). Y Strainer (S) VC or CVC body, Viton seals (optional EDM). Flow Verification Sensor (FVS) VDF body, VC socket weld connections, viton seals (optional EDM). Available working flow ranges in gallons per hour (ml/min): 0.47 to 3.2 (30 to 200) 0.79 to 14.3 (50 to 900) 1.58 to 28.5 (100 to 1800) 4.75 to 47.5 (300 to 3000) 7.93 to 79.3 (500 to 5000) 11.1to (700 to 7000) Universal mounting blocks VC ump extended mounting brackets 316 Stainless Steel Skid mounting foot / wall pads 316 Stainless Steel Mounting hardware 18-8 Stainless Steel Drip Tray olypropylene,16 x 21 x 3-4 gallons total containment Maximum working pressure psig (8.6 bar) Operating Temperature O O O O 14 F to 115 F (-10 C to 46 C) Approximate Shipping Weight (pump ships separately) Single ump System: 60 lb. (27.2 Kg) Dual ump System: 70 lb. (31.8 Kg) 2 of 6

3 iping and Instrumentation Diagrams: Single ump Skids: U-8 T-3 V-6 V-7 Outlet CC-1 Inlet 2 V-1 V-3 V-4 U-2 U-3 U-4 U-5 T-1 T-2 U-6 RV-1 CV-1 U-7 D-1 Secondary Discharge (capped) V-5 G-1 F-1 V-2 S-1 FVS optional Inlet 1 Dual ump Skids: U-8 T-3 V-6 V-7 Outlet CC-1 U T-3 T-4 Inlet 2 V-1 V-3 V-8 V-4 U-2 U-3 U-4 U-5 T-1 T-2 U-6 RV-1 CV-1 4 CV-2 D-1 V-5 G-1 F-1 V-2 S-1 FVS optional Inlet 1 3 of 6

4 Dimensions: Single ump Skids: 2.5" (6.4cm) 35.0" (88.9cm) (78.1cm) 6.0" (15.2cm) 20.25" (51.4cm) (60.3cm) 22.75" (57.8cm) 24" (61cm) Dual ump Skids: 2.5" (6.4 cm) 35.0" (88.9 cm) (78.1 cm) 6.0" (15.2 cm) 36.25" (92.1 cm) (101 cm) 22.75" (57.8 cm) 24" (61 cm) 4 of 6

5 Suggested Model Variations (see model number matrix below for additional variations): Number of umps Number of umps Model Number Matrix: 5 of 6 iping & Seals Suggested Models for Flex-ro eristaltic ump Applications Inlet Strainer Calibration Cylinder ressure Relief Valve ulsation Dampener ressure Gage w/guard 100 SI 100 SI 100 SI 100 SI Suggested Models for Chem-ro Diaphragm ump Applications iping & Seals Inlet Strainer Calibration Cylinder ressure Relief Valve ulsation Dampener ressure Gage w/guard Check Valve Check Valve Chem-Feed Skid Model Number CFS-1AA-XXAXBA CFS-1BA-XXAXBB CFS-2AA-XXAXBA CFS-2BA-XXAXBB Chem-Feed Skid Model Number CFS-1AA-AAAAAA CFS-1AA-AAAXAA CFS-1BA-BXABAA CFS-1BA-BXAXAA CFS-2AA-AAAAAA CFS-2AA-AAAXAA CFS-2BA-BXABAA CFS-2BA-BXAXAA Chem-Feed Engineered Skid System Matrix CFS - 1 Single pump system - single chemical / single outlet CFS - 2 Dual pump system - single chemical / single outlet iping / Valves / Unions / Seal Materials A VC piping, VC ball valves, VC unions, VC braided tubing connections, Viton seals B VC piping, VC ball valves, VC unions, VC braided tubing connections,e seals E CVC piping, CVC ball valves, CVC unions, VC braided tubing connections, Viton seals F CVC piping, CVC ball valves, CVC unions, VC braided tubing connections,e seals X Skid Frame only without piping Structure Assembly Materials A resistant powder coated aluminum stand with 316SS mounting hardware Inlet Strainer and Flow Verification Sensors A VC Strainer, Viton seals (without flow verification) Q CVC Strainer, Viton seals (without flow verification) B VC Strainer, E seals (without flow verification) R CVC Strainer, E seals (without flow verification) C VC Strainer & ml/min Flow Verification, Viton S CVC Strainer & ml/min Flow Verification, Viton D VC Strainer & ml/min Flow Verification, Viton T CVC Strainer & ml/min Flow Verification, Viton E VC Strainer & ml/min Flow Verification, Viton U CVC Strainer & ml/min Flow Verification, Viton F VC Strainer & ml/min Flow Verification, Viton V CVC Strainer & ml/min Flow Verification, Viton G VC Strainer & ml/min Flow Verification, Viton W CVC Strainer & ml/min Flow Verification, Viton H VC Strainer & ml/min Flow Verification, Viton Y CVC Strainer & ml/min Flow Verification, Viton J VC Strainer & ml/min Flow Verification, Viton 3 CVC Strainer & ml/min Flow Verification, Viton K VC Strainer & ml/min Flow Verification, E 4 CVC Strainer & ml/min Flow Verification, E L VC Strainer & ml/min Flow Verification, E 5 CVC Strainer & ml/min Flow Verification, E M VC Strainer & ml/min Flow Verification, E 6 CVC Strainer & ml/min Flow Verification, E N VC Strainer & ml/min Flow Verification, E 7 CVC Strainer & ml/min Flow Verification, E VC Strainer & ml/min Flow Verification, E 8 CVC Strainer & ml/min Flow Verification, E X None Calibration Cylinder Optional Materials of Construction - Order Code Volume VC olypropylene Glass 1.6 GH (100 ml) E L S 4 GH (250 ml) D K R 8 GH (500 ml) C J Q 16 GH (1,000 ml) B I (2,000 ml) A H O X None ressure Relief Valve A VC body, TFE diaphragm D CVC body, TFE diaphragm B VDF body, TFE diaphragm C TFE body, TFE diaphragm ulsation Dampener A 10 cubic inch, CVC body, TFE diaphragm, Viton seals B 10 cubic inch, CVC body, TFE diaphragm, EDM seals X None ressure Guage w/guard A VC guard, gauge, TFE diaphm G CVC guard, gauge, TFE diaphm B VC guard, 100 SI gauge, TFE diaphm H CVC guard, 100 SI gauge, TFE diaphm C X VC guard, 30 SI gauge, TFE diaphm None I CVC guard, 30 SI gauge, TFE diaphm Check Valve A VC valve body, Viton diaphragm seal B VC valve body, EDM diaphragm seal C CVC valve body, Viton diaphragm seal D CVC valve body, EDM diaphragm seal CFS - 1 A A - A A A X A A Sample Chem-Feed Engineered Skid System art Number Note: Flex-ro and Chem-ro pumps are sold and shipped separately.

6 roseries umps: roseries ump Features (see the specific technical data sheets for additional pump features) Valveless peristaltic technology self primes against maximum back pressure. Cannot Vapor lock. Linear output. Diaphragm technology for system pressures to 175 SI. VDF/Ceramic/TFEp head resists most chemicals. SCADA Input: Remote speed control via 4-20mA, 0-10VDC, high speed digital pulse, contact closure pulse SCADA Input:, contact closure (remote start / stop) Remote/Local control lockout settings SCADA Output:, high switching current alarm relay SCADA Output: Three, dry contact or maximum 30VDC/115VAC 1 amp contact closures SCADA Output: rogrammable 4-20mA signal or high speed pulse, proportional to pump output TFD (Tube Failure Detection) or DFD ( Tube Failure Detection) System Alarm FVS (Flow Verification System) Alarm * NEMA 4X (I66) wash-down rating Variable speed motor Variable speed brush-less DC motor Chem-ro Diaphragm ump Models: See additional pump models and more information at Feed Rate Operating Range GH LH ML/Min Flex-ro eristaltic ump Models: See additional pump models and more information at Feed Rate Operating Range GH Tubing chemical resistance data Maximum ressure SI (bar) 175 (12.0) 175 (12.0) 175 (12.0) 100 (6.8) Maximum Speed Strokes per Minute Tubing Meets FDA criteria for food Excellent chemical resistance Alcohol general Aluminum sulfate Ammonium chloride Ammonium hydroxide Benzyl alcohol Bleach Brine solutions Calcium hypochlorite 20% Ethylene glycol Ferric chloride Ferric nitrate Ferric sulfate Ferrous chloride - 43% in water Ferrous sulfate Formic acid Glucose Hydrochloric acid 33% Hydrocyanic acid Hydrogen peroxide Hypochlorous acid Iodine Tubing Meets FDA criteria for food Resistant to oils, greases and fuels umphead Materials Lactic acid Magnesium chloride Magnesium sulfate hosphoric acid lating solutions otassium hydroxide otassium permanganate Flex-ro eristaltic Chem-ro Diaphragm 6 of 6 115V AC C2V243XVA C2V241XVA C2V242XVA C3V242XVA Chem-ro Model Numbers 230V AC C2V253XVA C2V251XVA C2V252XVA C3V252XVA Tubing - Ultra smooth plasticizer-free bore (inner liner) Meets FDA criteria for food Superior chemical resistance Ferrous Chloride (up to 40%) Fluoboric Acid (up to 48%) Fluosilicic Acid (up to 25%) Cyclohexane Diesel Fuel Fatty acids Gasoline LH ML/Min Hydrofluoric Acid (up to 48%) Nitric Acid (up to 71%) hosphoric Acid (up to 85%) Heptane Hexane Kerosene Lard is a registered trademark of Saint-Gobain. is a registered trademark of Saint-Gobain. Note: Data shown at 72 degrees F. ump Tube Material otassium Hypochlorite (up to 70%) Sodium hosphate (up to 30%) Sulfuric Acid (up to 98%) Mineral spirits Soap solutions Turpentine Oils: Maximum ressure SI (bar) (8.6) (8.6) (8.6) 80 (5.5) 50 (3.4) 30 (2.1) 50 (3.4) 50 (3.4) 30 (201) Bases Salts Ketones ASTM reference No.1,2,3 Castor Coconut Fuel Maximum Speed RM ropylene glycol Sodium hydroxide 50% Sodium Bisulfite Sodium Hypochlorite 12.5% Sodium sulfide Sulfuric acid up to 50% Tannic acid Alcohols Isobutyl Alcohol Oils: Linseed Lubricating Mineral Flex-ro Model Numbers 115V AC A3V24-MND A3V24-MNH A3V24-MNK A4V24-MNK A4V24-MNL A4V24-MN A3V24-MTH A3V24-MTK A4V24-MTK A3V24-MGE A3V24-MGG A3V24-MGK A4V24-MGK A4V24-MGKK 230V AC A3V25-MND A3V25-MNH A3V25-MNK A4V24-MNK A4V25-MNL A4V25-MN A3V25-MTH A3V25-MTK A4V25-MTK A3V25-MGE A3V25-MGG A3V25-MGK A4V25-MGK A4V25-MGKK