Installation Instructions for SINGLE COLOR 12V or 24V LINEAR LED
|
|
- Gervase Payne
- 6 years ago
- Views:
Transcription
1 Installation Instructions for SINGLE COLOR 12V or 24V LINEAR LED LLI-L1.5W (T300) LLI-L2.2W (TSHL ) LLI-L2.5W (TSHL W) LLI-3.5W (TSHL ) LLI-L4.4W (TSHL ) LLI-L5.9W (TUB ) LLI-L7.0W (TSHL W) LLI-LMG1.1W (TPU) LLI-LSE3.0W (TSIDE600) LLI-LTP2.5W (TSHL2016-SO) LLI-LTP5.0W (TSHL2016-HO) LLI-LWF5.5W (WARM FADE) LLI-LSC4.4W (TSHL ) Prior to installation, please confirm that you have the required system components listed below. LED Linear Connectors Extrusions/Lens (Optional) Power Supplies 1
2 Please read and follow these steps before beginning the installation. These products may represent a potential shock or fire hazard if improperly installed or attached in any way. Products should be installed in accordance with these instructions, current electrical codes and/or the National Electric Code (NEC). DANGER/RISK OF SHOCK: Do not connect directly to high voltage power (120v-277v)! WARNING: To avoid electrical shock, disconnect or disable power at the source prior to installation or maintenance. To avoid electrical shock, use only with 12v or 24v DC hardwire or plug-in power supply. Factory warranty will be void is used otherwise. To avoid product failure, pair the correct voltage power supply to the correct voltage Linear LED e.g. 24v Linear LED with a 24v power supply. Factory warranty will be void if used otherwise. Do not energize Linear LED lighting when rolled up in it s spool. LLIA s Linear LED products are UL listed. Uncoated products are intended for indoor use in dry locations. Coated products are intended for outdoor use in damp /wet locations; Solid Silicone (SS) - IP68, Silicone Covered (SC) - IP67, Resin Dipped (RD) - IP65. Solid Silicone (SS) and TPU products are wet rated and can be submerged. Do not use if there is any damage to the unit or to the wiring insulation. Inspect periodically. Do not route cords or Linear LED through walls, doors, windows or any similar part of a building structure. Do not secure Linear LED or it s power cord with staples, nails, or any other sharp objects that may cause damage. Do not install Linear LED lighting closer than 6 to combustible material. Ensure proper gauge wires are installed between Power Supplies, Controls & Linear LED to avoid voltage drop. Ensure applicable wires are in compliance with local codes (In-wall rated, wet-location, high temperature, etc.). Maximum load for power supplies is 80%. ***If you have any questions or concerns about your installation, please call our Technical Specialists at *** 2
3 MAXIMUM BEND RADIUS 1 1/2 INCH DO NOT FOLD LINEAR LED DO NOT BEND LINEAR LED SIDE TO SIDE DO NOT COVER LINEAR LED OR APPLY EXCESS PRESSURE TO LINEAR LED 3
4 Prep Linear LED for Installation STEP 1 STEP 2 Remove the Linear LED spool from it s package and un-roll the LEDs. Measure the location where the Linear LED will be placed and identify the cut point of the Linear LED. The cut point be marked with a black line or a small scissors image. STEP 3 STEP 4 Cut the Linear LED to the desired length. Make sure you cut along the marked line and that the cut is straight. Peel back about a ¼ inch of the red backing and the adhesive tape, exposing the copper pads on the back of the Linear LED. NOTE: This product can be interconnected and energized by soldering leads to the copper pads. Soldering allows the uncoated Linear LED to fit tight spaces. NOTE: The Linear LED lighting only installs in one direction, load from top of connector only. The top of the connector has a red dot. If the Linear LED is installed upside down, it will not light. Linear LED end must have a straight cut for solid contact with connector. 4
5 Slide Connector Installation STEP 5a STEP 5b Carefully pull and extend the black clip on the connector. Push the Linear LED lighting into the space between the clip and the connector and push the black clip back. STEP 6a STEP 6b Carefully unsnap the cover on the connector. Push the Linear LED lighting into the groove on the connector so that the lighting contacts are positioned under the connector tabs. Push the cover back onto the connector. Ensure that the connector cover clicks and locks securely. ATTENTION- If you are mounting the Linear LED without channel follow steps 7-9, if you are mounting the Linear LED with channel please skip to step 10. 5
6 Installation without Channel/Lens IMPORTANT: Prior to mounting the Linear LED, please ensure the surface is clean and free of any loose debris. STEP 7 STEP 8 Remove the red adhesive backing from the Linear LED lighting and carefully place against the mounting surface. After mounting the Linear LED lighting ensure the assembly is flat against the surface. Secure lead wire from connector with the appropriate fastener. STEP 9 If you are interconnecting Linear LED sections you must use appropriate connector. NOTE: If you are done interconnecting your Linear LED, install the proper gauge wire from the power supply to the LED section. Please refer to the LLIA voltage drop chart on Page 9. Connect the low voltage wires to the leads attached to the Linear LED. 6
7 Installation with Channel/Lens IMPORTANT: Verify that the Linear LED and connector width are sized properly to fit into the channel with no interference to the lens. STEP 10 STEP 11 Measure the channel and cut to the desired length. Make sure to accommodate the profile of the endcap and the desired length for your Linear LED before cutting. Pull the wires through the endcap(s) and remove red adhesive backing from the Linear LED lighting. STEP 12 STEP 13 Carefully place inside the aluminum channel and place endcaps onto ends of channel. Ensure a tight fit between the channel and endcaps. LENS OPTION: Measure the opening for the lens between the endcaps. Cut lens to desired length and insert into channel. 7
8 STEP 14 Measure the channel and cut to the desired length. Make sure to accommodate the profile of the endcap and the desired length for your Linear LED before cutting. NOTE: This product can be wired and interconnected by soldering directly to the solder pads. Soldering allows the Linear LED to fit into tight spaces. NOTE: The Linear LED only installs in one direction, load from top of connector only. The top of the connector has a red dot. If the Linear LED is installed upside down, it will not light. Linear LED must be cut straight for solid contact with connector. IMPORTANT: Polarity is crucial for the operation of the Linear LED lighting. Please ensure that your wiring corresponds with the polarity of each copper pad. Power Supply & Receiver Setup STEP 15 STEP 16 Locate and route power feed wire back to power supply. Mount power supply in desired location and connect Single Color Linear vled to low voltage output of power supply. Connect the power supply to AC power/line voltage. Please refer to the wiring diagram of the power supply being used. Each power supply has it s own specific wiring. 8
9 Low Voltage Wire Gauge Chart 9
INSTALLATION INSTRUCTIONS WHITE / SINGLE COLOR 24V LED TAPE
LLI-L1.5W LLI-L2.2W LLI-L2.5W LLI-L3.5W LLI-L4.4W LLI-LHE3.5W LLI-LHE4.4W LLI-LHE5.9W LLI-LTP2.5W LLI-LTP5.0W LLI-LSE3.0W LLI-LWF5.5W LLI-LC4.4W **DANGER: Prior to installation, disconnect power at the
More informationINSTALLATION INSTRUCTIONS SURFACE EXTRUSIONS WITH LED TAPE
LLI-XS-30D LLI-XS-60D LLI-XS-90D LLI-XS-ANG LLI-XS-AUR LLI-XS-DEP LLI-XS-DOM LLI-XS-ELT LLI-XS-FLX LLI-XS-GEN LLI-XS-GZR LLI-XS-ICN LLI-XS-SQR LLI-XS-THN LLI-XS-WID LLI-XS-ZEN **DANGER: Prior to installation,
More informationInstallation Instructions for SINGLE COLOR 24V LINEAR LED NEON
Installation Instructions for SINGLE COLOR 24V LINEAR LED NEON LLI-N2.9W Prior to installation, please confirm that you have the required system components listed below. LED Neon Flow Extrusions/Lens (Optional)
More informationINSTALLATION INSTRUCTIONS RECESSED EXTRUSIONS WITH LED TAPE
LLI-XR-CRV LLI-XR-ELF LLI-XR-IFL LLI-XR-IGR LLI-XR-SQF LLI-XR-THF **DANGER: Prior to installation, disconnect power at the source.** Make sure you have all components listed below: LED tape 24VDC Power
More informationINSTALLATION INSTRUCTIONS NEON RGB
LLI-NCC3.7W **DANGER: Prior to installation, disconnect power at the source.** Make sure you have all components listed below: Neon 24V Non-Diming Power Supply RGB Receiver/Decoder Mounting Clips or Extrusion
More informationInstallation Instructions for GRIPPER CONNECTOR
Installation Instructions for GRIPPER CONNECTOR LLI-GC-LL-RGB LLI-GC-LL-RGBW (12mm only) LLI-GC-LL-SC LLI-GC-LL-VW LLI-GC-LW-RGB LLI-GC-LW-RGBW (12mm only) LLI-GC-LW-SC LLI-GC-LW-VW Prior to installation,
More information24 Volt Eco Flex LED Neon Part Numbers: LFN-2700K, LFN-5800K
24 Volt Eco Flex LED Neon Part Numbers: LFN-2700K, LFN-5800K 11235 West Bernardo Court, Suite 102 San Diego, CA 92127 888-880-1880 Fax: 707-281-0567 EnvironmentalLights.com Eco Flex LED Neon is an adaptable
More informationSLIMFLEX LED Tape Lighting
1 SLIMFLEX LED Tape Lighting Installation Guide BEFORE YOU BEGIN, READ INSTALLATION INSTRUCTIONS THOROUGHLY Install in accordance with the National Electric Code and local regulations This product is intended
More informationDURATAPE TM RGB IP66 OUTDOOR
Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors Ideal for exterior cove, under-counter/cabinet, lighting accents Complete with encased
More informationDL-FLEX (-UP, -UP-HO, -UP-ULTRA)
-HO -ULTRA DESCRIPTION DL-FLEX series is a unique commercial grade modular lighting system featuring 3 levels of light output with a wide range of accessories and a variety of control options. This unique
More informationDURATAPE TM RGB IP66 OUTDOOR
Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors Ideal for exterior cove, under-counter/cabinet, lighting accents Complete with encased
More informationLED STRIP LIGHTING KIT EUKT04 WW30
LED STRIP LIGHTING KIT EUKT04 WW30 This kit comes complete with everything you will need to light up your project. It includes a deluxe LED dimmer controller, a mated AC/DC power supply, 16 4 of LED strip
More informationDURATAPE TM HO INDOOR RGB+W
PROJECT MODEL(S) TYPE High Output RGB+W Tapelight High output indoor RGB and RGB+W LED Tapelight strip emits sharp, color changing effects in indoor niche, cove and architectural decorative applications.
More informationNUTP1-16LED 24V 16' Standard LED Tape Light Roll Source: 24W LEDs
NUTP1-16LED 24V 16' Standard LED Tape Light Roll Source: 24W LEDs PRODUCT DESCRIPTION LED Tape Light is a perfect solution for your LED linear lighting needs. This energy efficient and very low profile
More informationINSTALLATION & OPERATION MANUAL
EUKT05-RGBWW60 RGB + Warm White LED Strip Lighting System INSTALLATION & OPERATION MANUAL What s in the box? XC3-40500-RF RGB+W LED Controller w/ RF Remote Control EULSP0260-5.0 RGB+WW LED Strip Lighting
More informationAUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS
AUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS The original TOMMY GATE hydraulic lift Assembling the Auxiliary Battery Box 1. Remove the cover from the auxiliary battery box by removing the two nuts and
More informationNOVA FLEX FLEXIBLE LED SOLUTIONS
DESIGN SERIES / ARCHITECTURAL LIGHTING HighCRI (90) LED ribbon light in output ranges for every application. Architecturalgrade lighting that ensures proper execution of design intentions. 50,000 DESIGN
More informationInstallation Instructions: ACCENT HIGH OUTPUT SYSTEM
Installation Instructions: ACCENT HIGH OUTPUT SYSTEM READ THIS MANUAL BEFORE PROCEEDING WITH THE INSTALLATION. FAILURE TO FOLLOW THE INSTALLATION INSTRUCTIONS WILL VOID YOUR WARRANTY! INSTALLATION TIPS
More informationNUTP4-LED/4 12V 4" Standard LED Tape Light Section Source: 0.5W LEDs
NUTP4-LED/4 12V Standard LED Tape Light Section Source: 0.5W LEDs PRODUCT DESCRIPTION LED Tape Light is a perfect solution for your LED linear lighting needs. This energy efficient and very low profile
More informationDURATAPE TM HO INDOOR RGB+W
PROJECT MODEL(S) TYPE DURATAPE TM HO High Output RGB+W Tapelight High output indoor RGB and RGB+W LED Tapelight strip emits sharp, color changing effects in indoor niche, cove and architectural decorative
More informationWARNING NORDIC ALUMINIUM LIGHTING TRACK SYSTEMS
WARNING NORDIC ALUMINIUM LIGHTING TRACK SYSTEMS DO NOT solder connectors as this will prohibit the adapters circuit switch to move freely from circuit to circuit. Nordic Aluminium track adapters and accessories
More informationInstallation Instructions: HYPERION R-Lite SYSTEM
Installation Instructions: HYPERION R-Lite SYSTEM READ THIS MANUAL BEFORE PROCEEDING WITH THE INSTALLATION. FAILURE TO FOLLOW THE INSTALLATION INSTRUCTIONS WILL VOID YOUR WARRANTY! INSTALLATION TIPS Read
More informationHPNLS-HO. Installation Manual
Installation Manual WARNING: Do not lift fixture by cables. This could result in permanent damage to both the fixture and the cables. Damage resulting from grasping cables and/or putting undue pressure
More informationRibbonFlex Pro LED Accent Lighting White LED Tape Light. Welcome to RibbonFlex Pro LED Tape Lighting. Notes:
RibbonFlex Pro LED Accent Lighting White LED Tape Light 30 White LEDs per meter (9 LEDs per foot) Model # RF3528030 rev 01.14 Welcome to RibbonFlex Pro LED Tape Lighting Ultra thin and flexible, RibbonFlex
More informationDURATAPE TM RGBW IP66 OUTDOOR
Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors can be used together with 3000ºK White LED to create different tone of White or soften
More informationLUXLINEAR LOW 1707 SLEEKER ILLUMINATION MECHANICAL. Indoor/Dry Location Series
SLEEKER ILLUMINATION Our LUXLINEAR Low Profile 1707 LED light tubes is specially designed to fit into and illuminate slimmer, compact fixtures and applications. The profile s shorter height provides a
More informationDURATAPE TM RGB IP20 INDOOR
e Static Indoor Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors can be used together with White LED to create different tone of White or
More informationNUTP7-LED (Amber Finish) NUTP7-WLED (White Finish) 24V LED Tape Light Roll. Source: 24W Watts Per Foot CRI. 24V LED Tape Light Roll
ILLUMINATING THE FUTURE...SINCE 1989 NUTP7-LED (Amber Finish) NUTP7-WLED (White Finish) 24V LED Tape Light Roll PRODUCT DESCRIPTION Nora s very low profile, energy efficient LED tape is only 7/16" wide
More information50% 5 YEAR. Specification Sheet: LED Flex-Lite. The Energy Efficient LED Solution PRODUCT BENEFITS WARRANTY APPLICATIONS
The Energy Efficient LED Solution For accent lighting and various signage applications, s Flex-Lite offers an innovative and versatile LED alternative to neon. Flex-Lite encases white-light or primary-color
More informationDURATAPE TM ES IP66 OUTDOOR
Key Features Energy efficient narrow spaced LED flexible linear light strip for continuous consistant color in linear applications. Ideal for IP66 exterior cove, under-counter/cabinet, lighting accents.
More informationDURATAPE TM HO OUTDOOR RGB+W
PROJECT MODEL(S) TYPE High Output RGB+W Tapelight High output outdoor RGB LED Tapelight strip emits sharp, color changing effects in outdoor niche, cove and architectural decorative applications. Key Features
More informationLED NEON FLEX INSTALLATI ON GUI DE
LED NEON FLEX INSTALLATI ON GUI DE F I R E F L Y L I G H T I N G. C O M. A U WHAT IS LED NEON FLEX? THE MOST VERSATILE AND SIMPLE LIGHTING SYSTEM YOU WILL EVER USE LED Neon Flex is a green friendly, safe,
More informationDURATAPE TM RGBW IP20 INDOOR
e Static Indoor Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors can be used together with White LED to create different tone of White or
More informationPrimaLine 3 XT 24V Wet Location LED Tape Light
PrimaLine 3 XT 24V Wet Location LED Tape Light 0.55 in. wide Field cuttable every 2 in. PrimaLine 3 XT wet location tape is a high output, dimmable LED light that supplies the perfect level of brightness
More informationNUTP7-16LED 24V 16' Damp Label Standard LED Tape Light Roll Source: 24W Watts Per Foot
NUTP7-16LED 24V 16' Damp Label Standard LED Tape Light Roll Source: 24W - 1.5 Watts Per Foot PRODUCT DESCRIPTION LED Tape Light is a perfect solution for your LED linear lighting needs. This energy efficient
More informationAD592/592-10K Non-Room Units with a Junction Box, Weatherproof (WP) or Weather Tight (EU) Enclosure
592 Theory of Operation The 592 sensor is a two terminal integrated-circuit temperature sensor. The 592 provides an output current directly proportional to absolute temperature. When the temperature of
More informationDURATAPE TM ES IP66 OUTDOOR
Key Features Energy efficient narrow spaced LED flexible linear light strip for continuous consistant color in linear applications. Ideal for IP66 exterior cove, under-counter/cabinet, lighting accents.
More informationchannel damage the internal components and the weight may break the internal wiring or flexible strip.
YOU MAY NEED End cap Power adaptor Connector pin Splicing pin Connector Silicone glue Pliers Power converter Converter + surge protector Heat shrink Aluminium channel Heat gun NT cutter IMPORTANT NOTES
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. All 30528 INTERFACE 2006 CR-V Issue Date SEP 2005 PARTS LIST XM Radio Unit Kit (sold separately): P/N 08A15-EX5-000 2 Wire tie with clips
More informationINTEGRID TRACK (120V) SPECIFICATIONS
INTEGRID TRACK (120V) SPECIFICATIONS GENERAL Integrid Track shall be a combination Track and main runner for mech - anically supporting suspended ceiling systems. Integrid Track shall allow fixtures to
More informationSloanLED THINLED. Constant Current. Installation Guide
SloanLED THINLED Constant Current Installation Guide Product covered in this guide: ThinLED CC: Part Number Description 701228-18-A Amber ThinLED Constant Current 701228-18-B Blue ThinLED Constant Current
More informationDry Contact Closure Interface
Dry Contact Closure Interface Overview LuXout Shades Dry Contact Closure Contact closure interfaces allows integration of the Automation systems throughout the house. The contact closure interface communicates
More informationLED Wall Sconce. Offered with a frosted lens, these wall luminaires provide a high quality diffuse light due to their high CRI of more than 90.
Luminaires - LED Wall Sconce 04 LED Wall Sconce STANDARD offers two different styles of LED Wall Sconces, one of traditional design and the other more modern with a linear profile. These two models can
More informationInstallation Instructions: ACCENT SYSTEM
Installation Instructions: ACCENT SYSTEM READ THIS MANUAL BEFORE PROCEEDING WITH THE INSTALLATION. FAILURE TO FOLLOW THE INSTALLATION INSTRUCTIONS WILL VOID YOUR WARRANTY! INSTALLATION TIPS Read this entire
More informationNuheat WEATHER-READY HEAT TRACE PIPE FREEZE PROTECTION SYSTEM. Self-Regulating Heating Cable Installation Guide. UV Resistant Polyolefin Outer Jacket
Nuheat WEATHER-READY HEAT TRACE PIPE FREEZE PROTECTION SYSTEM Self-Regulating Heating Cable Installation Guide Tinned Copper Braid UV Resistant Polyolefin Outer Jacket 16 AWG Bus Wire Polyolefin Inner
More informationSource: 209.2LM per foot, 2.7W per foot
ILLUMINATING THE FUTURE...SINCE 1989 Type Project Catalog No. Lamp/Wattage NUTP51-W100LED9 Series 24V Continuous Hy-Brite LED Tape Light Source: 209.2LM per foot, 2.7W per foot Dimensions Max 32FT. PRODUCT
More informationWARNING. Important Notice
CAL (Color AquaLuminator ) Light and Return Water Flow for Above Ground Pools Owners Manual IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS Table of Contents SECTION
More informationPDX and PX Retrofit Series
UNIQUE LIGHTING SOLUTIONS PDX and PX Retrofit Series PDX1-1-12-XX PX1-1-12-X-X-XX-65 RETROFIT INSTALLATION GUIDE PDX and PX Series Retrofit WARNING -Retrofit installation must only be performed by a licensed
More informationLED IMPORTANT SAFETY INSTRUCTIONS
LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage
More informationINSTALLATION INSTRUCTION W Track Recessed 120V Flangeless
W Track Recessed 120V Flangeless WT4-RTL, WT8-RTL, WT12-RTL SAFETY INSTRUCTION Read all of these instructions before installing the track system. Turn off power at main switch before installing or modifying
More informationPSP(Power short Pitch)
P o W e r s H o r t P i t C H W H i t e s P e C i f i C a t i o n Cold Natural Warm Warm White White White White 6500K 4000K 3000K 2700K 247 Lumens/ft for only 2.89W/ft. Truly energy saving. liniled Power
More informationDURATAPE TM RGB IP20 INDOOR
e Static Indoor Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors can be used together with White LED to create different tone of White or
More informationTemperature Transmitters
Termination BAPI recommends using twisted pair of at least 22AWG and sealant filled connectors for all wire connections. Larger gauge wire may be required for long runs. All wiring must comply with the
More informationInstallation Instructions Table of Contents
Installation Instructions Table of Contents Pre- Installation of Garage Storage Lift 2 Layout the Garage Storage Lift 3 Installing the strut Channels 3 Install the Drive Assembly 5 Install the Drive Shaft
More informationSRK02 Hard Wire Power Connection Kit. Installation, Operation and Maintenance Instructions
SRK02 Hard Wire Power Connection Kit Installation, Operation and Maintenance Instructions IMPORTANT: Save These Instructions! Item Qty Description A 1 Black heat shrink tube (1/2 dia. x 1 length) B 2 Black
More informationLED IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage from fire, electric shock, falling
More informationNUTP1-16LED 24V 16' Standard LED Tape Light Roll
NUTP1-16LED 24V 16' Standard LED Tape Light Roll Source: 24W LEDs PRODUCT DESCRIPTION LED Tape Light is a perfect solution for your LED linear lighting needs. This energy efficient and very low profile
More informationDIY Bi-Metallic Strip
DIY Bi-Metallic Strip An introduction to the applications of thermal expansion and two-way switching. Written By: Mahaaveer BN 2018 Page 1 of 14 INTRODUCTION A bi-metallic strip is used to convert a temperature
More informationReplacing the X Axis Belt
Overview This Document is designed to guide you through replacing the X axis belt on your Epilog Zing laser Engraver. Requirements: Tools: Replacing the X Axis Belt For the Epilog Zing Laser Engraver Revision
More informationDURATAPE TM HO INDOOR
PROJECT MODEL(S) TYPE DURATAPE TM HO High Output LED Tapelight Energy Efficient LED flexible linear light strip for continuous consistent color in linear applications. Extremely flexible and adjustable
More informationInstallation Instructions
1 of 12 Overview Clear Lens Cover (#-LC) Power Connector (#LLED8500-PC) RGB StripLite (#LLED8500) End View.73 Extrusion (#) 1.62 End Cap (#-EC) 8 Maximum extrusion and lens length (Dry Location field cuttable)
More informationINSTRUCTIONS. Power Panel. Installation Instructions
Overview LuXout Shade 18 Output - For use with LuXout Shades NOTICE: This power supply is built-in fan on/off control circuit. Fan automatically works according to working temperature. SHOCK HAZARD Risk
More informationHPFB. Installation Manual WARNING: DO NOT LIFT FIXTURE BY CABLES.
Installation Manual WARNING: DO NOT LIFT FIXTURE BY CABLES. This could result in permanent damage to both the fixture and the cables. Damage resulting from grasping cables and/ or putting undue pressure
More informationLINEARlight Colormix Flex and LINEARlight Colormix Flex Protect Quick installation guide
www.osram.com/flex LINEARlight Colormix Flex Protect LINEARlight Colormix Flex LINEARlight Colormix Flex and LINEARlight Colormix Flex Protect Quick installation guide 05/2015 Light is OSRAM 1 Installation
More informationNUTP11 RGBW Series RGBW LED Tape Light (Color Changing) Source: 5W Per Foot LED
ILLUMINATING THE FUTURE...SINCE 1989 Type Project Catalog No. Lamp/Wattage NUTP11 RGBW Series RGBW LED Tape Light (Color Changing) Source: 5W Per Foot LED PRODUCT DESCRIPTION Nora's RGBW tape light has
More informationSunwize Power Ready Express Quick Start
Document # 310002 Sunwize Power Ready Express Quick Start The purpose of this guide is to assist you in setting up your system quickly and efficiently. Important! Prior to field installation Determine
More informationINSTALLATION GUIDES OUTDOOR LIVING
S OUTDOOR LIVING TABLE OF CONTENTS 12 Volt 12 Watt DC Transformer Page 2 12 Volt 50 Watt DC Smart Transformer Page 3 12 Volt 50 Watt Smart Transformer Control Page 4-5 Waterproof Dimmer For 12W Transformer
More information1400 Architura RGB Outdoor Linear LED
1400 Architura RGB Outdoor Linear LED Features LEDs deliver even diffused light without LED images DMX input color control Life >50,000 hours (LM79) Construction Extruded aluminum housing. Diecast endcaps.
More informationCHEVY MONTE CARLO. Two Panel Sequential LED Tail Light Kit Installation Guide
1986-88 CHEVY MONTE CARLO Two Panel Sequential LED Tail Light Kit Installation Guide Kit Contents: 2 LED panels 4 rubber grommets 1 power wire 1 pigtail harness Kit 1 crimp terminal Kit 1 adhesive tube
More informationRECESSED TRACK (120V) SPECIFICATIONS
RECESSED TRACK (120V) SPECIFICATIONS GENERAL Recessed track shall be approved by the NEC for flush-mounting into ceiling or any flat surface. Recessed Track shall allow fixtures to be easily focused, switched,
More informationDURATAPE TM RGBW IP20 INDOOR
e Static Indoor Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors can be used together with 2700ºK White LED to create different tone of
More informationSource: 81.68LM per foot, 1.3 W per foot
ILLUMINATING THE FUTURE...SINCE 1989 Type Project Catalog No. Lamp/Wattage NUTP71-W100LED9 Series 24V Continuous Standard LED Tape Light Source: 81.68LM per foot, 1.3 W per foot Dimensions PRODUCT DESCRIPTION
More informationALTITUDE ARMS AND CANOPY
INSTALLATION MANUAL ALTITUDE ARMS AND CANOPY RV THIS MANUAL PROVIDES INSTRUCTIONS FOR THE BASIC INSTALLATION OF THE AWNING. Read this manual before installing or using this product. Failure to follow the
More informationTetra minimax. LED Lighting System. BEFORE YOU BEGIN Read these instructions completely and carefully. Installation Guide
Installation Guide Volt Tetra minimax LED Lighting System GEMMRD-W, GEMMGL-W, GEMMBL-W BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSMENT RISK OF ELECTRIC SHOCK Turn
More informationCASCADE LED LIGHT BAR
DO NOT CONNECT CASCADE LED LIGHT BAR TO HIGH VOLTAGE DRY/WET LOCATION DIMMABLE 12V DC SPECIFICATION SHEET High brightness Outdoor / wet location ETL Listed 3-Year limited warranty Ø.36 in. (9mm) L 12 ~
More informationTLT Tapelight Series 24VDC Damp Location RGBW Flexible Tapelight
24VDC Damp Location RGBW Flexible Tapelight Specifications/Features Tape Light Flexible, low voltage linear LED accent lighting system provides high quality illumination for many indoor applications including:
More informationInstallation Manual. CS9300 Professional Series Landscape Lighting System
Installation Manual CS9300 Professional Series Landscape Lighting System CS9300 Professional Series Landscape Lighting System pg. 1 READ THESE INSTRUCTIONS ENTIRELY BEFORE BEGINNING INSTALLATION! Congratulations
More informationDURATAPE TM SB OUTDOOR
PROJECT MOEL(S) TYPE URTPE TM SB Standard spacing SB Tapelight Energy Efficient outdoor IP66 LE flexible linear light strip for continuous consistent color in linear applications. Extremely flexible and
More informationAssembly Guide ELECTRIC. Model Numbers: C1. (English) /14/11
Assembly Guide Model Numbers: 12601559 12601578 12601663 12601664 12601665 12601688 12601514 12601514-C1 ELECTRIC (English) 42804641 09/14/11 2 ASSEMBLY GUIDE A, B, C, Assembly: CAUTION: For your safety,
More informationM9206-Bxx-2S Series On/Off Electric Spring Return Actuators
Installation Instructions M9206-Bxx-2S Issue Date May 14, 2003 M9206-Bxx-2S Series On/Off Electric Spring Return Actuators Installation IMPORTANT: Use this M9206-Bxx-2S Series actuator to control equipment
More informationlipleds LLED8650-LW 2 of 12 Installation Instructions
lipleds LLED8650-LW 1 of 12 Overview Frosted Lens Cover (#LLED8650-LW-FL) RGBW StripLite (#LLED8650) Power Connector (#LLED8650-PC) End View.50 Extrusion (#LLED8650-LW) 1.15 8 Maximum extrusion and lens
More informationSURFACE TRACK (120/250V) SPECIFICATIONS
SURFACE TRACK (120/250V) SPECIFICATIONS GENERAL Lighting Track shall allow fixtures to be located anywhere along the track length. Fixtures shall be easily focused, switched, dimmed, accessorized and removed
More informationLED STRIPS, PROFILES AND ACCESSORIES
194 STRIP LED strips professional range. FLEXIBLE STRIPS IP 20 IP20 flexible LED strip. Fixation by adhesive tape. 5 meter roll. Split every 6 LEDs (10 cm). Ref. Description Colour Temp. Colour Leds/meter
More informationPN CHEVY TRI-FIVE. Kit Contents: Four panel Sequential LED Taillight kit installation guide
Four panel Sequential LED Taillight kit installation guide Kit Contents: 2 tail light LED panels 2 tail light turn signal LED panels 1 rubber boot/sleeve kit 1 power wire with t-tap 1 driver side LED harness,
More informationApplications. Shelf Lighting General Lighting Food Lighting Accent Lighting. Electrical Properties. Photometric Code. Typ.
LEDtape 700 HDE G2 - High Density Efficiency IP20/IP65 Highlights Ready-to-connect flexible LED-strip with High Density and Efficiency HDE Constant Current Driven IC for professional lighting applications
More information3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination
3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working around energized electrical systems may
More informationINSTALLATION INSTRUCTIONS For Light*Waves Flex II Kit with 300-Watt remote transformer
IMPORTANT SAFETY INSTRUCTIONS READ ALL OF THESE BEFORE INSTALLING THE TRACK SYSTEM. SAVE THESE INSTRUCTIONS AND REFER TO THEM WHEN ADDITIONS TO OR CHANGES TO THE SYSTEM ARE MADE. THIS IS A 12-VOLT SYSTEM
More informationTable of Contents
Table of Contents Page 4 Warnings 5 Seating Position Information 6 Child Restraint Safety Information 8 Seat Belt Information 9 Carrying Restraint 10 Unfolding and Folding Restraint 13 Installing and Removing
More informationInstallation Instructions. Power Connector (#LLED8300-PC) End View Electrical cords
1 of 13 Overview Frosted Lens Cover (#-LF) LED StripLite (#LLED8300) Power Connector (#LLED8300-PC) End View.73 Extrusion (#) 1.62 End Cap (#-EC) 8 Maximum extrusion and lens length (Dry Location field
More informationLED IMPORTANT SAFETY INSTRUCTIONS
LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage
More informationApplications. Food Lighting Shelf Lighting Accent Lighting Ambient Lighting. Electrical Properties
LEDtape 400 ECO IP20/IP65 Highlights Ready-to-connect flexible LED-tape for professional lighting applications High operating efficiency >80 lm/w (CCT 4000 K) Excellent white color consistency MacAdams
More informationInstallation Instructions .59 CALIFORNIA ACCENT LIGHTING, INC.
1 of 13 Overview Frosted Lens Cover (#-LF) Power Connector (#LLED8300-PC) LED StripLite (#LLED8300).80 6.5 3.9 or 6.5 6.5 increments up to max run ± 0.125 cutting tolerance Extrusion (#).59 6.5 (2.5W)
More informationInstallation Instructions: Epson 1400 CFS
Installation Instructions: Epson 1400 CFS Epson 1400 with MIS CFS Installed *A perfect print with OEM cartridges is a must* Prerequisite - Before starting this installation, you MUST test your printer
More informationDURATAPE TM ES OUTDOOR
PROJECT MOEL(S) TYPE URTPE TM ES OUTOOR Narrow spacing ES Tapelight Energy Efficient outdoor IP66 LE flexible linear light strip for continuous consistent color in linear applications. Extremely flexible
More informationS17-LED. Finelite, Inc Whipple Road Union City, CA / Fax: 510 /
10 Industry Best Year LED Warranty Date Project ACF Angled Curved Fascia - Solid (SF) Type Comments VCF Vertical Curved Fascia - Perforated (PF) Signal White is standard finish DESCRIPTION Light up corridors,
More informationRoller Shade Installation Instructions
Roller Shade Installation Instructions Standard Installation p - 2 - Cordless Installation p - 6 - Cassette Installation p - 10- Motorization Solar Panel Installation p - 12 - Motorization Remote Control
More information7.5 FT PRE-LIT ENGLEWOOD PINE TREE
ITEM #0243778 7.5 FT PRE-LIT ENGLEWOOD PINE TREE Holiday Living & Design is a registered trademark of LF, LLC. All Rights Reserved. MODEL #W14L030 Español p. 11 ATTACH YOUR RECEIPT HERE Serial Number Purchase
More informationIMPORTANT SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS READ ALL OF THESE INSTALLATION INSTRUCTIONS BEFORE INSTALLING THE TRACK SYSTEM SAVE THESE INSTRUCTIONS AND REFER TO THEM WHEN ADDITIONS TO OR CHANGES IN THE TRACK CONFIGURATION
More informationLINEARlight FLEX Diffuse 400 LFD400T / LFD400MT / LFD400S / LFD400MS
www.osram.us/flexlighting LINEARlight FLEX Diffuse 400 LFD400T / LFD400MT / LFD400S / LFD400MS Key Features & Benefits Saturated, homogeneous linear LED modules with the look of neon Flexible and field
More informationATTACH YOUR RECEIPT HERE ITEM # FT. PRE-LIT DOUGLAS FIR TREE. MODEL #DF-75C85 Español p. 8
ITEM #0776 7. FT. PRE-LIT DOUGLAS FIR TREE MODEL #DF-7C8 Español p. 8 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our
More information