LED Illumination Units

Transcription

1 LE Illumination Units LF1E IP54 LF1- (mini) LF1/LF IP67F IP67 IP69K LF1-EH/FH LF-EH/FH LF1-H/LF1-J (long) EF1 IP67 LF1-N IP65 LF1 IP4 LF IP65 (13//15)

2 LE Illumination Unit TM LE Illumination Unit Selection Lineup Shape pplication Examples Illumination olor K: olor Temperature (typ.) mm: ominant Wavelength (typ.) Reference Illumination (typ.) Size L W H mm Power onsumption Page Robust and resistant housing. an be used in environments subject to water, dust, and oil. LF1 (ox) LF (Flange) egree of Protection: IP67f/IP67/IP69K* * LF1 only Slim Wide The optimal light distribution can be achieved by combining the lenses of different distribution angle. Machine tools Food processing machines Test equipment (5,7K) lear Surface: 1,1 lx (directly below at 1.m) (4,4 lx directly below at 5cm, calculation value) iffused surface: 1, lx (directly below at 1.m) (4, lx directly below at 5cm, calculation value) LF1-E LF-E Reinforced glass (te 1) (clear/diffused) LF1-F LF-F Polycarbonate (te ) (clear/diffused) 4V Slim: 9W Wide: 1.5W 6 Wide-angle and highilluminance model. LF1- H (ox) LF- H (Flange) egree of Protection: IP67f/IP67/IP69K* * LF1 only Slim Machine tools Food processing machines utomatic manufacturing machines Printing machines Production system Test equipment (5,7K) Slim: 1,45 lx (directly below at 1.m) Wide: 1, lx (directly below at 1.m) LF1-EH LF-EH LF1-FH LF-FH Reinforced glass (te 1) Polycarbonate (te ) Wide Wide: 1.5W 4V Slim: 11W 1 LF1- (Mini) egree of Protection: IP67f/IP67/IP69K (5,7K) 1 lx (directly below at 1.m) Reinforced glass 4V 4.6W 1 LF1-H (long) egree of Protection: IP67f/IP67/IP69K Machine tools Food processing machines utomatic manufacturing machines Printing machines Production system Test equipment Neutral (4,7K) 56 lx (directly below at 1.m) Reinforced glass 4V 1.4W 1 LF1-J (long) egree of Protection: IP67f/IP67/IP69K Neutral (4,7K) 4 lx (directly below at 1.m) Reinforced glass 4V 7.6W 1 te 1: Reinforced glass is resistant against oil. te : Polycarbonate is suitable for food processing machine. (13//15) (13//15) 3

3 LE Illumination Unit TM LE Illumination Unit Selection Lineup Shape pplication Examples Illumination olor K: olor Temperature (typ.) mm: ominant Wavelength (typ.) Reference Illumination (typ.) Size L W H mm Power onsumption Page Universal input (1 to 4V) and 1/4V. ompact and slim design. LF egree of Protection: IP65 Various machines and systems ontrol panel Plant Solar power equipment (5,5K) lear over over LF-: 3 lx LF-: 45 lx LF-: 71 lx LF-E: 93 lx LF-F: 1,16 lx LF-: 15 lx LF-: 39 lx LF-: 645 lx LF-E: 35 lx LF-F: 1,4 lx LF LF LF LF-E LF-F 1, 4 9 Polycarbonate 1/4V 1 to 4V 1/4V LF-:.6W LF-: 4.9W LF-: 1.6W 1 to 4V LF-: 3.W LF-: 7.5W LF-: 9.W LF-E: 14.3W LF-F: 1.W 16 Thin and slim styles fit into compact spaces. IP65 (waterproof, dustproof). 6 different lengths and 6 distinct colors. LF1-N egree of Protection: IP65 Machine tool Plant equipment Test equipment ontrol panel Food processing machines osmetic plant hemical plant Show cases Semiconductor manufacturing equipment I foundry Photosensitive material Semiconductor manufacturing equipment arkroom experiment dvertising isplay Light ornaments (5,5K) Warm white (,9K) Yellow (59nm) Red (6nm) lue (455nm) Green (55nm) lear cover LF1-N: 9 lx LF1-NF: 935 lx (directly below at 5cm) LF1-N: 6 lx LF1-NF: 6 lx (directly below at 5cm) LF1-N: lx LF1-NF: 1 lx (directly below at 5cm) LF1-N: 1 lx LF1-NF: lx (directly below at 5cm) LF1-N: 3 lx LF1-NF: 3 lx (directly below at 5cm) LF1-N LF1-N LF1-N LF1-N LF1-NE LF1-NF 1, lear cover (polycarbonate) cover (polycarbonate) 4V Warm white lue LF1-N: 1.5W LF1-N:.9W LF1-N: 4.4W LF1-N:.7W LF1-NE: 13.W LF1-NF: 17.3W Yellow Red Green LF1-N: 1.W LF1-N:.W LF1-N:.9W LF1-N: 5.W LF1-NE:.7W LF1-NF: 11.6W 1 LE module and highly efficient heat dissipation technology achieved slim design. LF1 egree of Protection: IP4 ontrol panel Plant equipment Machine tool Test equipment Food processing machine osmetic plant hemical plant Semiconductor manufacturing equipment I foundry Semiconductor manufacturing equipment Photographic laboratory arkroom experiment (5,5K) Warm white (,K) Yellow (59nm) Red (65nm) lear cover LF1-1: 19 lx LF1-1: 3 lx LF1-1: 76 lx (directly below at 5cm) LF1-1: 13 lx LF1-1: 6 lx LF1-1: 5 lx (directly below at 5cm) LF1-1: 5 lx LF1-1: 17 lx LF1-1: 34 lx LF LF LF lear PMM 4V Warm LF1-1: 1.W LF1-1: 3.6W LF1-1: 7.W Yellow Red LF1-1:.W LF1-1: 4.4W LF1-1:.7W Resistant against dust and water. -lens, condensing lens, and dual lens available. LF1E egree of Protection: IP54 Freezer and refrigerated display case (5,K) Warm white (3,K) ondensing Lens LF1E-: 1, lx LF1E-: 1,95 lx LF1E-:, lx LF1E-:, lx LF1E-E:, lx (directly below at 3cm) LF1E-: LF1E-: LF1E-: LF1E-: 1, LF1E-E: 1, lear cover (polycarbonate) 4V LF1E-: 4.W LF1E-:.4W LF1E-: 1.6W LF1E-: 16.W LF1E-E:.W an be used in hazardous area of Zone 1 and. EF1 egree of Protection: IP67 Product Inspection Printing factory Gas station hemical complex control panel (5,7K) lear glass surface: 1,1 lx (condensing light) 5 lx (diffused light) Translucent glass: 45 lx (condensing light) 175 lx (diffused light) irect mounting angle adjustable mounting bracket mounting bracket Reinforced glass 1 to 4V 4V 19W 16W 5 te 1: Reinforced glass is resistant against oil. te : Polycarbonate is suitable for food processing machine. 4 (13//15) (13//15) 5

4 LF1/LF LE Illumination Units rightest in its class, excellent power savings. Optimal optical design achieves high brightness at both the center and periphery. IP67F degree of protection. LE provides energy-savings, long-life, space-saving and no-maintenance advantages. Illumination surface variety reinforced glass or polycarbonate, both in clear or diffused type. IP67F degree of protection (polycarbonate: IP67) IP69K degree of protection (LF1) Robust housing of aluminum diecast and stainless steel. Thin and slim profiles allow installation in space-limited areas. Even low profile is available with the sleek design of LF. Resistant to dust build up on the surface. pplication examples Machine tools, food processing equipment, automatic manufacturing machines, printing machines, production system, test equipment, refrigeration and freezers. LF1 (Illumination color: white) Style Slim (LF1-E) Wide (LF1-F) Gland LF9Z-11 Shape LE rrangement 1 LEs 1 row 7 LEs rows Optional ccessories LF9Z-5 Mounting racket LF9Z-11, -1 lear Reinforced Glass lear Polycarbonate lear Reinforced Glass lear Polycarbonate out LF1-EF-W LF1-E3G-W LF1-FF-W LF1-F3G-W ( gland hole on the side of LF1) LF1-EF-W-11 LF1-E3G-W-11 LF1-FF-W-11 LF1-F3G-W-11 out LF1-EF-W- LF1-E3G-W- LF1-FF-W- LF1-F3G-W- ( gland hole on the back of LF1) LF1-EF-W-1 LF1-E3G-W-1 LF1-FF-W-1 LF1-F3G-W-1 LF1-EF-W-3 LF1-E3G-W-3 LF1-FF-W-3 LF1-F3G-W-3 LF1-EF-W-31 LF1-E3G-W-31 LF1-FF-W-31 LF1-F3G-W-31 (Side) LF1-EF-W-35 LF1-E3G-W-35 LF1-FF-W-35 LF1-F3G-W-35 LF1-EF-W- LF1-E3G-W- LF1-FF-W- LF1-F3G-W- LF1-EF-W-4 LF1-E3G-W-4 LF1-FF-W-4 LF1-F3G-W-4 LF1-EF-W-41 LF1-E3G-W-41 LF1-FF-W-41 LF1-F3G-W-41 (ack) LF1-EF-W-45 LF1-E3G-W-45 LF1-FF-W-45 LF1-F3G-W-45 LF1-EF-W-451 LF1-E3G-W-451 LF1-FF-W-451 LF1-F3G-W-451 ontact IE for cable gland hole other than the standard M size. Use lass power supply when using the LF1 as UL/c-UL listed LE illumination unit. LF (Illumination color: white) Style Slim (LF-E) Wide (LF-F) Shape LE rrangement 1 LEs 1 row 7 LEs rows Optional ccessories Gland LF9Z-11 LF9Z-5 lear Reinforced Glass lear Polycarbonate lear Reinforced Glass lear Polycarbonate out (cable gland hole on the side of LF) LF-EF-W LF-E3G-W LF-FF-W LF-F3G-W out (cable gland hole on the back of LF) LF-EF-W- LF-E3G-W- LF-FF-W- LF-F3G-W- (Side) LF-EF-W-3 LF-E3G-W-3 LF-FF-W-3 LF-F3G-W-3 LF-EF-W- LF-E3G-W- LF-FF-W- LF-F3G-W- (ack) LF-EF-W-4 LF-E3G-W-4 LF-FF-W-4 LF-F3G-W-4 LF-EF-W-45 LF-E3G-W-45 LF-FF-W-45 LF-F3G-W-45 ontact IE for cable gland hole other than the standard M size. Use lass power supply when using the LF as UL/c-UL listed LE illumination unit. ccessories ccessory Material Part. Remarks Package Quantity Gland rass LF9Z-11 M, applicable wire size: ø3.5 to 5.5 mm 1 Mounting For LF1-E (slim) LF9Z-11 mounting screws (for right and left) Stainless Steel racket For LF1-F (wide) LF9Z-1 mounting screws (one each for right and left) PV LF9Z-5 5m 1 See page 4 for angle adjustable mounting bracket (LF1). Use lass power supply when using the LF as UL/c-UL listed LE illumination unit. Part. evelopment 1 Series LF Series name Specifications Model LF1 LF Style Slim Wide Slim Wide 4V Voltage Range 1.6 to 6.4V Rated Power (typ.) (at rated voltage) 9W 1.5W 9W 1.5W Insulation Resistance 1MΩ minimum (5V megger) ielectric Strength 1V 5/6Hz, 1 minute Vibration Resistance (damage limits) Frequency 5 to 55 Hz, amplitude.5 mm Shock Resistance (damage limits) 1 m/s Operating Temperature 3 to +55 (no freezing) Operating Humidity 45 to 5% RH (no condensation) Storage Temperature 35 to +7 (no freezing) Operating tmosphere corrosive gas Life (te 1) 5, hours (The illumination duration in which the brightness maintains a minimum of 7% of the initial value at 5.) egree of Protection (te ) IP67F (reinforced glass), IP67 (polycarbonate) Material (te 3) : iecast aluminum Front cover: Stainless steel and flange: iecast aluminum Illumination surface: Reinforced glass or Illumination surface: Reinforced glass or polycarbonate polycarbonate Weight (approx.) LF1-E -W : 75g LF1-E -W- : 95g LF1-F -W : g LF1-F -W- :1g LF1/LF LE Illumination Units LF-E -W : 5g LF-E -W- : 1g LF-F -W : 9g LF-F -W- : 15g te 1: LE life depends on the operating environment. te : Waterproof or oil-proof characteristics specified by IE 659 and JEM13. For illumination units without accessories, use a cable gland and cable that satisfy IP67F or IP67 degree of protection. te 3: The reinforced glass and polycarbonate illumination surfaces have the same appearance, but have different degrees of protection (IP67F or IP67). LE Optical Specifications Model LF1 LF Style Slim Wide Slim Wide lear iffused lear iffused lear iffused lear iffused Illumination olor olor Temperature (typ.) 57K Total Luminous Flux (typ.) 6 lm 4 lm 6 lm 4 lm Reference Illuminance (typ.) at 1.m directly below 11 lx 1 lx 11 lx 1 lx 11 lx 1 lx 11 lx 1 lx LE modules and illumination units may vary in illumination color and illuminance. Illuminance istribution (LF1/LF) at 1.m Slim Y (mm) lear surface X (mm) Shape 1 ox Flange 4 Reinforced glass lear 3 Polycarbonate 5 Polycarbonate iffused 9 Reinforced glass 4 Reinforced glass: F Polycarbonate: G Y (mm) Style (LE arrangement) E Slim (1 LEs 1 row) F Wide (7 LEs rows) iffused surface X (mm) Y (mm) egree of Protection F IP67f G IP67 Wide lear surface X (mm) 6 Voltage 4V LF E F W Terminal lock Wiring Slim Wide pplicable ferrules:.5 to.75 mm Recommended source: Phoenix ontact: I,5-1 U, I,34-1 TQ, I,5-1 WH, I,75-1 GY Internal ircuit Y (mm) Illumination olor W Gland (LF9Z-11) (LF9Z-5) (LF9Z-11, LF9Z-1) lank out accessories. gland hole on the side. cable gland (standard). cable. mounting bracket (LF1 only) 1 out cable gland. gland hole on the side. out out cable gland. gland hole in the back. out 3 cable gland (standard) on the side. out 1 4 cable gland (standard) in the back. 5 LF1/LF: "1" and "351" are not available. LF: "35" and " 1" (with mounting bracket) are not available. (+) (+) (+) onstant-current power supply + LE X: long side Y: short side iffused surface X (mm) 6 (13//15) (13//15) 7

5 LF1/LF LE Illumination Units LF1/LF LE Illumination Units LF1-E (Slim, 1 LEs 1 row) R ll dimensions in mm. LF-E (Slim, 1 LEs 1 row) ll dimensions in mm M4 P.7 Effective thread: m 4 5. ±. 4-M5 Screws 4-ø4. (159) xis enter ±. Illumination Surface (146) out cable gland, mounting bracket, and cable Front over length: 5m ø5. Side over 15 -ø4. rown: (+) lue: Pink: Panel thickness: 5 max max..7 External diameter of cable gland is ømm xis enter 374 ± Gland 6-M5 1 Hexagon Socket Flat Head Screw + Gasket (supplied with LF) ø5. Waterproof Gasket (supplied with LF) rown: (+) lue: Pink: length: 5m 4 4 ±. 4-M4 P.7 Effective thread: 1 mm 35 ±. M P1. Effective thread: 5 mm 4 4±. 65 ± M5 Screws LF1-F (Wide, 7 LEs rows) R LF-F (Wide, 7 LEs rows) M5 P. Effective thread: m 6 4 ±. 4-M5 Screws (1) xis enter 7 9 ±. (17) Illumination Surface Front over length: 5m ø5. Side over rown: (+) lue: Pink: Panel thickness: 5 max. 5 max. 4. External diameter of cable gland is ømm xis enter 93 ± Gland 6-M5 1 Hexagon Socket Flat Head Screw + Gasket (supplied with LF) ø5. rown: (+) lue: Pink: length: 5m Waterproof Gasket (supplied with LF) 4-ø5. out cable gland, mounting bracket, and cable 1 -ø5. 6-M5 Screws 6 6 ±. M P1. Effective thread: 5 mm 6 6 ±. 9 ± M5 P. Effective thread: 1 mm 7 ±. (13//15) (13//15) 9

6 LF1/LF LE Illumination Units Water, dust, oil-proof LE illumination units in slim and compact housings. variety of sizes and light distribution angles for various sizes and types of machine. Water, dust, oil-proof IP67, IP67F (reinforced glass illumination surface), IP69K (LF1) degree of protection. Robust housing of aluminum diecast, stainless steel, and reinforced glass. LF1- (mini) ompact profile of mm. -multi shadow light illuminate the small surface scratches and irregularity of target objects, improving the processing accuracy. Wide 1o distribution angle. LF1-EH / LF-EH / LF1-FH / LF-FH (slim/wide) Lights the target object and the periphery in wide angle. Suitable for middle-sized machines. The terminal block and spring clamp connections ensure easy wiring and installation. ombination with angle adjustable mounting bracket enables installation in various applications. LF1-H / LF1-J (long) Two length available (365 mm and 51 mm). Flat, no-multi shadow light with less glare illuminates the small surface scratches and irregularity of target objects from a distance, improving the processing accuracy. Wide 1o distribution angle. High-power /3 lm luminous flux is suitable for replacing fluorescent light. LF1- (mini, illumination color: white) Length Part. (side) LF1-F-W-33 5m LF1-F-W-35 (back) LF1-F-W-43 5m LF1-F-W-45 LF1-EH/FH (slim/wide, wide angle & high illuminance, shape: box, illumination color: white) Style Slim (LF1-EH) Wide (LF1-FH) Optional ccessories Gland LF9Z-11 out (cable gland hole on the side) out (cable gland hole on the back) (side) (back) Package Quantity: 1 Mounting (5m) racket LF9Z-5 LF9Z-11, -1 Reinforced Glass Polycarbonate Reinforced Glass Polycarbonate LF1-EHF-W LF1-EH3G-W LF1-FHF-W LF1-FH3G-W LF1-EHF-W-11 LF1-EH3G-W-11 LF1-FHF-W-11 LF1-FH3G-W-11 LF1-EHF-W- LF1-EH3G-W- LF1-FHF-W- LF1-FH3G-W- LF1-EHF-W-1 LF1-EH3G-W-1 LF1-FHF-W-1 LF1-FH3G-W-1 LF1-EHF-W-3 LF1-EH3G-W-3 LF1-FHF-W-3 LF1-FH3G-W-3 LF1-EHF-W-31 LF1-EH3G-W-31 LF1-FHF-W-31 LF1-FH3G-W-31 LF1-EHF-W-35 LF1-EH3G-W-35 LF1-FHF-W-35 LF1-FH3G-W-35 LF1-EHF-W- LF1-EH3G-W- LF1-FHF-W- LF1-FH3G-W- LF1-EHF-W-4 LF1-EH3G-W-4 LF1-FHF-W-4 LF1-FH3G-W-4 LF1-EHF-W-41 LF1-EH3G-W-41 LF1-FHF-W-41 LF1-FH3G-W-41 LF1-EHF-W-45 LF1-EH3G-W-45 LF1-FHF-W-45 LF1-FH3G-W-45 LF1-EHF-W-451 LF1-EH3G-W-451 LF1-FHF-W-451 LF1-FH3G-W-451 LF-EH/FH (slim/wide, wide angle & high illuminance, shape: flange, illumination color: white) Style Slim (LF-EH) Wide (LF-FH) Optional ccessories Gland LF9Z-11 out (cable gland hole on the side) out (cable gland hole on the back) (side) (back) Package Quantity: 1 (5m) LF9Z-5 LF1- (mini) pplication Examples Machine tools, food processing equipment, automatic manufacturing machines, printing machines, production system, and test equipment. LF1-EH/FH LF-EH/FH LF1-H/LF1-J (long) Reinforced Glass Polycarbonate Reinforced Glass Polycarbonate LF-EHF-W LF-EH3G-W LF-FHF-W LF-FH3G-W LF-EHF-W- LF-EH3G-W- LF-FHF-W- LF-FH3G-W- LF-EHF-W-3 LF-EH3G-W-3 LF-FHF-W-3 LF-FH3G-W-3 LF-EHF-W- LF-EH3G-W- LF-FHF-W- LF-FH3G-W- LF-EHF-W-4 LF-EH3G-W-4 LF-FHF-W-4 LF-FH3G-W-4 LF-EHF-W-45 LF-EH3G-W-45 LF-FHF-W-45 LF-FH3G-W-45 LF1-EH/FH, LF-EH/FH ccessories (slim/wide) ccessory Material Part. Remarks Package Quantity Gland rass LF9Z-11 M, applicable wire size: 3.5 to LF1-E/LF1-EH (slim) LF9Z-11 Stainless Steel LF1-F/LF1-FH (wide) LF9Z-1 mounting screws (for right and left) ngle djustable LF1-E/LF1-EH (slim) LF9Z-1ME1 Stainless Steel LF1-F/LF1-FH (wide) LF9Z-1MF1 PV LF9Z-5 5 m 1 LF1-H (long model 365 mm, illumination color: neutral white) Length Part. Side ack Part. evelopment 1 Series LF Series Name Specifications 5m LF1-HF-N m + M1 connector LF1-HF-N-3 5m LF1-HF-N m + M1 connector LF1-HF-N-4 LF1-J (long model 51 mm, illumination color: neutral white) Length Part. Side ack 5m LF1-JF-N m + M1 connector LF1-JF-N-3 5m LF1-JF-N m + M1 connector LF1-JF-N-4 Model LF1- LF1-E/LF-E LF1-EH/LF-EH LF1-F/LF-F LF1-FH/LF-FH LF1-H LF1-J Style Mini Slim Slim (wide angle & Wide (wide angle & Wide high illuminance) high illuminance) Long (365 mm) Long (51 mm) 4V Voltage Range 1.6 to 6.4V Rated Power (typ.) (at rated voltage) 4.6W 9W 11W 1.5W 1.5W 1.4W 7.6W Insulation Resistance 1MΩ minimum (5V megger) ielectric Strength 1,V, 5/6Hz, 1 minute Vibration Resistance Frequency 5 to 55Hz, amplitude.5mm (damage limits) Shock Resistance (damage limits) 1, m/s Operating Temperature 3 to +55 (no freezing) Operating Humidity 45 to 5%RH (no condensation) Storage Temperature 35 to +7 (no freezing) Operating tmosphere corrosive gas Life (te 1) 5, hours (The illumination duration in which the brightness maintains a minimum of 7% of the initial value at 5.) egree of Protection (te ) IP67 (all models), IP67F (reinforced glass illumination surface), IP69K (LF1) Material (te 3) Weight (approx.) Shape 1 ox Flange 5 Reinforced glass lear 3 Polycarbonate 5 iffused Polycarbonate 9 Reinforced glass : aluminum Front cover: stainless steel Illumination surface: reinforced glass LF1-F-W-35: 4g 3 Style (LE arrangement) Mini E Slim F Wide H Long (365 mm) J Long (51 mm) : diecast aluminum Front cover (LF1): stainless steel Flange (LF): diecast aluminum Illumination surface: reinforced glass or polycarbonate LF1-E (H)**-W-W: 95g LF-E (H)**-W-: 1,g TM LF1/LF LE Illumination Units 4 Light istribution lank Standard Wide angle & H High Illuminance 6 egree of Protection F IP67F G IP Gland (LF9Z-11) 9 (LF9Z-5) LF9Z-11, LF9Z-1 lank out accessories. gland hole on the side. 1 out cable gland. gland hole on the side. out out cable gland. gland hole on the back. out out 3 cable gland (standard) on the side. 3 cable 1 5 5m cable 4 cable gland (standard) on the back. 1.5m cable + M1 connector Slim/Wide: with cable gland, 5m cable. mounting bracket. LF1-F (H)**-W-: 1,g LF-F (H)**-W-: 1,5g 7 Voltage 4V LF E H F W t all combinations of part no. codes are possible. For available part nos., contact IE. : aluminum Front cover: stainless steel Illumination surface: reinforced glass LF1-HF-N-35: 1,g Illumination olor W (5,7K) Neutral N (4,7K) LF1-JF-N-35: 1,6g te 1: LE life depends on the operating environment. te : Waterproof or oil-proof characteristics specified by IE 659 (IP67) and IN45-9 (IP69K). For illumination units without accessories, use a cable gland and cable that satisfy the required degree of protection. te 3: The reinforced glass and polycarbonate illumination surfaces have the same appearance, but have different degrees of protection. 1 (13//15) (13//15) 11

7 TM LF1/LF LE Illumination Units LE Optical Specifications LF1-E/EH (Slim Model/ox) (1 LEs 1 row) LF1-E/LF-E Illumination olor LF1-EH/LF-EH Slim (wide angle & high illuminance) Style Mini Slim olor Temp. (typ.) 5,7 K LF1-F/LF-F Wide LF1-FH/LF-FH Wide (wide angle & high illuminance) LF1-H LF1-J Long (365 mm) Long (51 mm) R Neutral.6 Luminus Flux (typ.) 56 lm 6 lm 1, lm 4 lm 1,6 lm, lm 3, lm 1 lx 1,1 lx 1,45 lx 1,1 lx 1, lx 56 lx 4 lx LF1-J LF1-H (lx) (lx) (lx) 45 1, 1, (mm) 4 4 (mm) 4 4 (mm) 4-M5 Screws 4 5 9º 9º 9º 4 6 6º 6 6º 3 3º 3º 1, 3º º 1 9º 6o 6º 3º 1, 9º 1 6º 3º 3o 3o 3º 3º o º LF1-E(H)/LF1-F(H) LF-E(H)/LF-F(H) (+) onstant urrent ircuit + LE (+) LF-E/EH (Slim Model/Flange) (1 LEs 1 row) onstant urrent ircuit + LE (3.9) 1.1 ote) Front over Length 1 rown: + 4V lue: V Length: 5m Gland (te) te: External diameter of cable gland is ømm Waterproof Gasket (suplied with LF) +. te: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. lso, provide a proper sealing. Recommended M5 screw: Screw head height: 9.5mm max. Screw head diameter: m max. Screw length: mm min. Recommended washer diameter: m max ±. (+) pplicable ferrules:.5 to.75mm Recommended source: I.5-1U, I.34-1TQ, I.5-1 WH, I.75-1GY 6-M5 Screws rown: L(+) lue: N Pink: ( ) Terminal lock Wiring Partially-stripped ( ) 4WG ø (N 6-M5 1 Hexagon Socket + Gasket (supplied with LF) xis enter 65 ± Panel thickness: 5 max ø max. LF1- (Mini Model) 1. onstant urrent ircuit + LE ø5 ø (+) LF1-H/LF1-J M P1. Effective thread: 5mm 35 ± (When using no accessories) M4 P.7 Effective thread m º Internal ircuit LF1-6º (te ) te : When using the angle adjustable mounting +. bracket, the tolerance is when the gasket diameter is larger than ø1 and ø1 or smaller º 6o 6º 6º 1, º º 9o 9o 4 9º 5 LF1-J LF1-H LF1/-FH 374 ø1 164.±1 1) 1º 1 ± te 9º 9 te 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. (mm) 4 o (N LF1/-EH 9º 9 5 Light istribution urve LF ±. R (mm) (146) ±. 4 ngle: 9 Parially-stripped ( ) 4WG 4 (lx) Side over 66 5 LF1/-FH (lx) (159) rown: L(+) lue: N Pink: ( ) 13 LF1/-EH 4-M4P.7 Effective thread:m 4 ±. LF1-6º 6 Front over xis enter Light istribution haracteristics at 1. m LF9Z-1ME1 (ngle djustable ) ngle: 15 Length: 5m LE modules and illumination units may vary in illumination color and illuminance ,7 K Reference Illuminance (typ.) at 1.m directly below LF Model LF1/LF LE Illumination Units 9 TM -M5 tapped hole or ø5. hole ll dimensions in mm. (13//15) ll dimensions in mm. (13//15) 13

8 LF1/LF LE Illumination Units TM LF1/LF LE Illumination Units LF1-F/FH (Wide Model/ox) (7 LEs rows) R Mounting Hole Layout M5 P. Effective thread:m 6 4 ±. xis enter 4-M5 Screws 4-ø5. (1) (17) 14. (When using no accessories) Front over Length: 5m ø5 Side over 1 1 rown: L(+) lue: N Pink: ( ) Parially-stripped ( ) 4WG -ø5. LF9Z-1ME1 (ngle djustable ) te 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. 14. ±1 te : When using the angle adjustable mounting 9 ± +. (te ) bracket, the tolerance is when the gasket diameter is larger than ø1 and ø1 or smaller. ø15 (te 1) ngle: ngle: 9 R6 9 LF1-H (Long Model, 365 mm) ±. 365 Front over ± ±. M5 P. 6-ø5.5 Partially-stripped ( ) 4WG Side over Length 1.5 (35) LF1-HF- - (M1 connector) (5) ø4.6 ø (te 1) rown: +4V lue: V te 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. ø16 hole is necessary when using the LF1- F-N- (M1 connector type). te : hoose mounting screws in consideration of mounting plate thickness M1 connector: S-4P-MS SO/15/1.5 N +4V Mounting Panel Plain Washer Spring Washer Pin ssignment M5 Screw ø14. V N Use a connector that satisfies the required degree of protection. Recommended connector: S-4P-1.5-PUR/FS SO 9 to 11 Screw Length (te ) - sec. (enlarged view) (When M5 screw is installed) 6 6 ±. 4-M5 P. Effective thread: m 7 ±. M P1. Effective thread: 5mm 6 6 ±. LF1-J (long model, 51 mm) rown: +4V lue: V 1.7 LF-F/FH (Wide Model/Flange) (7 LEs rows) Front over Length 1.5 (35) ø4.6 Partially-stripped ( ) 4WG Side over LF1-JF- - (M1 connector) ø14. 5 max. xis enter 6-M5 1 Hexagon Socket + Gasket (supplied with LF) 36 1 M5 P. M1 connector: S-4P-MS SO/15/1.5 N +4V Pin ssignment V N Panel thickness: 5 max 4. 9 ± ± Gland (te) ø5 Length: 5m Waterproof Gasket (suplied with LF) 6-M5 Screws rown: L(+) lue: N Pink: ( ) te: External diameter of cable gland is ømm Terminal lock Wiring (+) pplicable ferrules:.5 to.75mm Recommended source: I.5-1U, I.34-1TQ, I.5-1 WH, I.75-1GY ll dimensions in mm. 7 7 ±. 36 ±. 1 ±. 3 ±. -ø5.5 (5) ø (te ) te 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. ø16 hole is necessary when using the LF1- F-N- (M1 connector type). te : hoose mounting screws in consideration of mounting plate thickness. Use a connector that satisfies the required degree of protection. Recommended connector: S-4P-1.5-PUR/FS SO Mounting Panel Plain Washer Spring Washer M5 Screw 9 to 11 Screw Length (te ) - sec. (enlarged view) (When M5 screw is installed) ll dimensions in mm. 14 (13//15) (13//15) 15

9 16 LF LE Illumination Units Universal input (1 to 4V ) and 1/4V input models are available. ompact and slim design suitable for installing in various applications and also in narrow spaces. IP65 (waterproof, dustproof). Slim design (4mm wide, 9mm high). an be installed in narrow spaces easily using mounting brackets. Five different lengths (1, 33, 5, 3, and 1, mm) available. right and clear white LE illuminates the target object clearly and brightly. hoice of two cover colors: clear and white. US LISTE (1/4V model only) Illumination olor Shape Part. evelopment LF- 3 P-THWW-1M Length : m : 3m : 5mm E: m F: 1,mm Internal ircuit 1 to 4V rown (L) lue (N) 1/4V rown (+) lue over 3: lear 4: Fuse Fuse : 1 to 4V : 1/4V (1, 33, and 5mm lengths only) onstant-current power supply + LE lear over onstant-current power supply + LE ccessories Model U-shaped Mounting racket L-shaped Mounting racket out mounting bracket Gland Gland rown: L (: +) WG 1 lue: N (: ) Use lass power supply when using the LF as UL/c-UL listed LE illumination unit (1/4V only). Part. Package Quantity Remarks Supplied with the LF. LF9Z-1S1PN1 1 LF-, -, and : Two brackets are supplied. LF-E: Three brackets are supplied. LF-F: Four brackets are supplied. LF9Z-1SPN1 1 ø5.5 rown: : 1 L L over (: +) Part. L WG 1 LF- P- THWW-1M 1 lue: N (supplied) (: LF- P- THWW-1M ) 33 LF- P- THWW-1M 5 LF-E P- THWW-1M : 1 3 L LF-F P- THWW-1M 1, ø5.5 (.5) Mounting Recommended racket (supplied) mounting centers: over over 1 to 4V 1/4V 1 to 4V 1/4V LF- (m) LF-3P-THWW-1M LF-3P-THWW-1M LF-4P-THWW-1M LF-4P-THWW-1M LF- (3m) LF-3P-THWW-1M LF-3P-THWW-1M LF-4P-THWW-1M LF-4P-THWW-1M LF- (5mm) LF-3P-THWW-1M LF-3P-THWW-1M LF-4P-THWW-1M LF-4P-THWW-1M LF-E (m) LF-E3P-THWW-1M LF-E4P-THWW-1M LF-F (1,mm) LF-F3P-THWW-1M LF-F4P-THWW-1M End over End over Package quantity: 1 Two brackets (for right and left) are required for alternate mounting of an LF ll dimensions in mm. Flat Screw M4 (supplied) nti-projection M4 P.7 Hole Screw Hole (Either 31 one of the two) Or ø4. Flat Hole Screw M4.5 (supplied) ø.1 Specifications Model LF- (m) LF- (3m) LF- (5mm) LF-E (m) LF-F (1,mm) 1 to 4V, 5/6 Hz (voltage range: 9 to 64V ) 1/4V (voltage range: 1. to 3V ) Input urrent (typ.) 1 to 4V 33 m 67 m 96 m 149 m 6 m (at the rated current) (te 1) 1/4V 15 m 49 m m Power onsumption (typ.) (at 1 to 4V 3.W 7.5W 9.W 14.3W 1.W the rated voltage) 1/4V.6W 4.9W 1.6W Insulation Resistance 1MΩ min. (5V meggar) ielectric Strength 1 to 4V,V, 1 minute (between live and dead parts) 1/4V 1,V, 1 minute (between live and dead parts) Vibration Resistance (damage limits) Frequency: 5 to 55 Hz, mplitude.17 mm cceleration m/s, hours each in 3 axes Shock Resistance (damage limits) /s, 5 shocks each in 6 axes Operating Temperature 3 to +55 (no condensation) Operating Humidity 45 to 5% (no freezing) Storage Temperature 35 to +7 (no condensation) Operating tmosphere corrosive gas 4, hours (Ta = 5 ) (The total illumination life in which the illuminance maintains a minimum of Life (te ) 7% of the initial value.) egree of Protection IP65 (IE 659) Material over: polycarbonate, End cover/cable gland: polyamide. Wire: PV (WG4 ) Weight (approx.) 1 to 4V g 55g 4g 5g 645g 1/4V 175g 35g 37g te 1: 1 to 4V : at 1V, 1/4V : 1V te : LE life depends on the operating environment. LE Optical Specifications Illumination olor olor Temperature 5,5K Model LF- (m) LF- (3m) LF- (5mm) LF-E (m) LF-F (1,mm) Luminous Flux (typ.) 1 lm 36 lm 7 rown: lm L 1, lm 1 lx 1,44 lm lx over 1 lx End over 9 lx (: +) 3 lx3 lx 5 lx5 lx over lear lear lear lear 5 lx5 lx lear 1 lx1 lx 1 lx1 lx lx lx Reference Illuminance (typ.) at 15 lx15 lx 3 lx3 lx 3 lx 15 lx 45 lx 39 lx 71 WG lx lx 93 lx lx lx 35 lx 1,16 lx4 lx4 1,4 lx lx.5m directly below lue: N LE modules and illumination units may vary in illumination colors and illuminance. Gland (: ) Illuminance istribution at.5m (clear cover) LF- (m) rown: L (: +) WG 1 lue: N Gland (: ) ø5.5 : 1 1 lx 3 lx 5 lx 1 lx 15 lx lx LF- (3m) over mounting bracket LF9Z-1S1 (U-shaped brackets supplied with LE) (supplied) lx 5 lx 1 lx lx 3 lx 4 End lx over (.5) Recommended mounting centers: Recommended 1.7 Mounting Hole Layout Mounting bracket LF9Z-1S1 39 (13//15) (13//15) ø4. (7) ø4. (optional) M4 Screw Hole or ø4. Hole L Mounting bracket LF9Z-1S R LF- (5mm) 4 R lx 5 lx 1 lx lx 4 lx 9 7 lx Flat Screw M4 (supplied) nti-projection M4 P.7 Hole Screw Hole (Either one of the two) Or ø4. Hole.5 ø.1 Mounting Hole Layout LF LE Illumination Units ø5.5 : 1 LF-3P-THWW-1M LF-E (m) L LF-3P-THWW-1M (.5) Recommended mounting centers: LF-F (1,mm) 45 LF-3P-THWW-1M 7 LF-E3P-THWW-1M LF-F3P-THWW-1M 5 lx5 lx 5 lx(supplied) 5 1 lx lx lx1 lx lx lx lx lx Flat 4 lx4 lx 4 lx4 lx Screw 7 lx7 lx lx lx M4 9 lx9 lx lx lx (supplied) mounting bracket LF9Z-1S (L-shaped bracket purchased separately from LE) 39 (7) (optional) M4 Screw Hole or ø4. Hole 1.7 ø nti-projection M4 P.7 Hole Screw Hole (Either one of the two) Or ø4. Hole 4 R.1 7 Part. Required. of LF9Z-1S1 LF9Z-1S LF- P- THWW-1M LF- P- THWW-1M LF- P- THWW-1M LF-E P- THWW-1M LF-F P- THWW-1M 1, ,16 1, ø

10 LF1-N LE Illumination Units Thin and slim styles fit into compact spaces. IP65 (waterproof, dustproof). 6 different lengths and 6 distinct colors. ompact design (7.5mm wide, 16mm high, and 134 to 1,mm long) fits into narrow spaces. Improved brightness with white illumination color., warm white, yellow, red, blue, and green illumination colors. Two cover colors: clear and white. LISTE US Illumination olor Warm Yellow Red lue Green Shape lear cover Specifications Model Input urrent (typ.) (at the rated current) Power onsumption (typ.) (at the rated voltage) Insulation Resistance ielectric Strength Vibration Resistance (damage limits) LF1-N (134mm) LF1-N (m) LF1-N LE Illumination Units LF1-N (3m) LF1-N (5mm) LF1-NE (m) 4V (operating voltage range: 1.6 to 6.4V) white/warm white/ blue 6m 36m 54m 7m red/yellow/green 4m m 1m 4m 36m 4m white/warm white/ blue 1.5W.9W 4.4W.7W 13.W 17.3W red/yellow/green 1.W.W.9W 5.W.7W 11.6W 1MΩ minimum (5V megger) 1,V, 1 minute (between live and dead parts) Frequency: 5 to 55 Hz, mplitude.5mm cceleration 6m/s, hours each in 3 axes LF1-NF (1,mm) Frequency: 5 to 55 Hz, mplitude.17mm cceleration m/s, hours each in 3 axes Shock Resistance (damage limits) 1,m/s, 5 shocks each in 6 axes /s, 5 shocks each in 6 axes Operating Temperature 3 to +55 (no freezing) Operating Humidity 45 to 5% RH (no condensation) Storage Temperature 35 to +7 (no freezing) Operating tmosphere corrosive gases Life (te) 4, hours (Ta = 5 ) (The total illumination life in which the illuminance maintains a minimum of 7% of the initial value.) egree of Protection IP65 (IE 659) Material over: polycarbonate, End cover/cable gland: polyamide, Wire: PV (4WG ) Weight (approx.) 95g 15g 165g 55g 43g 74g te: LE life depends on the operating environment. LF1-N (134mm) LF1-N (m) LF1-N (3m) LF1-N (5mm) LF1-NE (m) LF1-NF (1,mm) pplication cover lear cover LF1-N3P-THWW- LF1-N3P-TLWW- LF1-N3P-SHY- LF1-N3P-SHR- LF1-N3P-THS- LF1-N3P-SHG- cover LF1-N4P-THWW- LF1-N4P-TLWW- LF1-N4P-SHY- LF1-N4P-SHR- LF1-N4P-THS- LF1-N4P-SHG- lear cover LF1-N3P-THWW- LF1-N3P-TLWW- LF1-N3P-SHY- LF1-N3P-SHR- LF1-N3P-THS- LF1-N3P-SHG- cover LF1-N4P-THWW- LF1-N4P-TLWW- LF1-N4P-SHY- LF1-N4P-SHR- LF1-N4P-THS- LF1-N4P-SHG- lear cover LF1-N3P-THWW- LF1-N3P-TLWW- LF1-N3P-SHY- LF1-N3P-SHR- LF1-N3P-THS- LF1-N3P-SHG- cover LF1-N4P-THWW- LF1-N4P-TLWW- LF1-N4P-SHY- LF1-N4P-SHR- LF1-N4P-THS- LF1-N4P-SHG- lear cover LF1-N3P-THWW- LF1-N3P-TLWW- LF1-N3P-SHY- LF1-N3P-SHR- LF1-N3P-THS- LF1-N3P-SHG- cover LF1-N4P-THWW- LF1-N4P-TLWW- LF1-N4P-SHY- LF1-N4P-SHR- LF1-N4P-THS- LF1-N4P-SHG- lear cover LF1-NE3P-THWW- LF1-NE3P-TLWW- LF1-NE3P-SHY- LF1-NE3P-SHR- LF1-NE3P-THS- LF1-NE3P-SHG- cover LF1-NE4P-THWW- LF1-NE4P-TLWW- LF1-NE4P-SHY- LF1-NE4P-SHR- LF1-NE4P-THS- LF1-NE4P-SHG- lear cover LF1-NF3P-THWW- LF1-NF3P-TLWW- LF1-NF3P-SHY- LF1-NF3P-SHR- LF1-NF3P-THS- LF1-NF3P-SHG- cover LF1-NF4P-THWW- LF1-NF4P-TLWW- LF1-NF4P-SHY- LF1-NF4P-SHR- LF1-NF4P-THS- LF1-NF4P-SHG- Machine tools Plant equipment Inspection/test equipment ontrol panel Part. evelopment Food processing machines osmetic plants hemical plants Showcases Semiconductor manufacturing equipment I foundries Photosensitive materials Semiconductor manufacturing equipment arkroom experiment Specify cable length in place of in Part. 1M:, 3M: Use lass power supply when using the LF1-N as UL/c-UL listed LE illumination unit. LF1 - N3P - THWW - 1M Length : 134mm : m : 3m : 5mm E: m F: 1,mm over 3: lear 4: Illumination color THWW: TLWW: Warm white SHY: Yellow SHR: Red THS: lue SHG: Green length 1M: 3M: dvertising isplay Light ornaments Internal ircuit rown (+) lue Fuse LE LE Optical Specifications Illumination olor Warm Yellow Red Green lue olor Temperature/ ominant Wavelength (typ.) Reference Illuminance (typ.) at.5m directly below LF1-N LF1-N LF1-N LF1-N LF1-NE LF1-NF 5,5K,9K 59nm 6nm 55nm 455nm lear: 9 lx : lx lear: lx : lx lear: 4 lx : 36 lx lear: 66 lx : 6 lx lear: lx : 74 lx lear: 935 lx : 5 lx lear: 6 lx : 55 lx lear: 145 lx : 13 lx lear: 5 lx : 5 lx lear: 455 lx : 41 lx lear: 56 lx : 5 lx lear: 6 lx : 555 lx lear: lx : 1 lx lear: 4 lx : 36 lx lear: 75 lx : 65 lx lear: 15 lx : 11 lx lear: 16 lx : 145 lx lear: 1 lx : 16 lx LE modules and illumination units may vary in illumination colors and illuminance. Illuminance istribution at.5m (reference value) LF1-N3P-THWW- 15 lx 3 lx 45 lx 6 lx LF1-N3P-THWW- LF1-N3P-THWW- 3 lx 6 lx 9 lx 1 lx 15 lx LF1-N3P-THWW- 1 lx 15 lx lx 5 lx 3 lx LF1-NE3P-THWW- 1 lx 1 lx 5 lx 5 lx 4 lx 4 lx 5 lx 55 lx 6 lx 7 lx LF1-NF3P-THWW- 1 lx 3 lx 5 lx 7 lx 9 lx lear: lx : 1 lx lear: 4 lx : 36 lx lear: 75 lx : 65 lx lear: 15 lx : 11 lx lear: 16 lx : 145 lx lear: 1 lx : 16 lx 7.5 lear: 3 lx : 7 lx lear: 6 lx : 55 lx lear: 11 lx : 1 lx lear: 19 lx : 17 lx lear: 6 lx : 35 lx lear: 3 lx : 7 lx R () lear: 1 lx : 9 lx lear: lx : 1 lx lear: 3 lx : 7 lx lear: 5 lx : 45 lx lear: 6 lx : 55 lx lear: lx : 7 lx Model LF1-N LF1-N LF1-N LF1-N LF1-NE LF1-NF 1, 1,1 1,69 Model LF1-N - -1M 1, LF1-N - -3M 3, ll dimensions in mm (13//15) (13//15) 19

11 LF1 LE Illumination Units Energy saving LE illumination units, only 1/3 power consumption compared with fluorescent lamps. 4, hour service life, no maintenance needed. LE modules and highly efficient heat dissipation technology achieves low heat generation. Only mm high, making it possible to installing inside a small space., warm white, yellow, and red. Part. evelopment LF1-1 - THWW6 : 4V LE arrangement: 1: 3 LEs columns 1: 6 LEs columns 1: 1 LEs columns LE illumination color THWW6: TLWW6: Warm SHY: Yellow SHR: Red LF1 LE Illumination Units LE Illumination Units Illumination olor Warm Yellow Red 3 LEs columns LF1-1-THWW6- LF1-1-TLWW6- LF1-1-SHY- LF1-1-SHR- Part. 6 LEs x columns LF1-1-THWW6- LF1-1-TLWW6- LF1-1-SHY- LF1-1-SHR- 6 LEs columns LF1-1-THWW6- LF1-1-TLWW6- LF1-1-SHY- LF1-1-SHR- Shape LE Optical Specifications Part. LF1-*THWW6- LF1-*TLWW6- LF1-*-SHY- LF1-*-SHR- Illumination olor Warm Yellow Red Luminous Intensity (typ.) (Single LE module) 6mcd 4mcd 4mcd 5mcd olor Temperature (typ.) / ominant Wavelength (typ.) 55K K 59nm 65nm 3 LEs rows 19 lx 13 lx 13 lx 5 lx Reference Illuminance 6 LEs rows 3 lx 6 lx 6 lx 17 lx (typ.) at 5 cm 1 LEs rows 76 lx 5 lx 5 lx 34 lx te: Insert "U" in place of for LE illumination unit with UL/c-UL/E marking. Spectrum Features pplication Examples 4nm 7nm 4nm 7nm 4nm 7nm 4nm 7nm Suppressing glare, the bright, clear white illumination color lights up a target object clearly. Machine Tools ontrol Panel/Plant Equipment Inspection/Test Equipment Warm color similar to that of an incandescent light bulb. This illumination color gives off a color temperature of K. Food Processing Machines osmetic Plants hemical Plants Yellow illumination color gives off an emission spectrum with a dominant wavelength of 59 nm. It does not include 5 nm or shorter wavelengths. Semiconductor Manufacturing Equipment I Plants Red illumination color gives off an emission spectrum with a long wavelength (dominant wavelength of 65 nm). pplication Equipment for Photographic Laboratory Semiconductor Manufacturing Equipment arkroom Experiments te: Insert "U" in place of for LE illumination unit with UL/c-UL/E marking. Use lass power supply when using the LF1 as UL/c-UL listed LE illumination unit. Specifications Part. Input urrent (typ.) (at rated voltage) Rated Power (typ.) (at rated voltage) LF1-*-THWW6 LF1-*-TLWW6 LF1-*-SHY LF1-*-SHR 4V (non-polarized) 3 LEs x rows 75m 9m 6 LEs x rows 15m 1m 1 LEs x rows 36m 3 LEs x rows 1.W.W 6 LEs x rows 3.6W 4.4W 1 LEs x rows 7.W.7W etween live and dead parts: 1 MΩ (5V megger) etween live and dead parts: 1V, 1 minute Insulation Resistance ielectric Strength Vibration Resistance (amage limits) 5 to 55Hz,.5mm m/s Shock Resistance (amage Limits) 9m/s Operating Temperature to 5 Operating/Storage Humidity 45 to 5% RH (no condensation) Storage Temperature 5 to +7 Operating tmosphere corrosive gas 4 hours (The total illumination duration in which the luminance maintains a minimum of 7% of the Life initial value.) Weight (approx.) LF1-1: 19g, LF1-1: 7g, LF1-: 47g egree of Protection IP4 out UL/c-UL/E marking: : L, End plate: SP, Lens: PMM (Polymethyl methacrylate), gland: rass, Wire: PV (VTF.3sq) Material UL/c-UL/E marking: : L, End plate: SP, Lens: P (Polycarbonate) gland: rass, Wire: PV (RO-FLEX1T WG) te: Insert "U" in place of for LE illumination unit with UL/c-UL/E marking. 55 Internal ircuit lack 4V (non-polarized) 1 R ø R R R 1 LE Wire (non-polarized) VTF.3SQ cores 11 Model LF1-1-* LF1-1-* LF1-1-* 3 7 ll dimensions in mm. (13//15) (13//15) 1

12 LF1E LE Illumination Units LF1E LE Illumination Units LE illumination units for freezer and refrigerated display cases. LE light sources achieve energy saving, long service life, reduced mounting space, elimination of noise, and low heat generation. vailable in 4 lengths of 55,, 166, and 145 mm designed to meet the width of display cases. 3 types of light distribution characteristics are available; no-lens, condensing lens, and dual lens. IP54 protection against dust and water. LF1E Illumination Unit onduit rown: L (+) lue: N ø5.9 length: 3 Partially-stripped ( ) 1 WG L over 1. End over 36 (supplied) (LF9Z-1SE1) ø4. 14 Thickness =.4 1 When using mounting bracket max. 36 Specifications Model LF1E- LF1E- LF1E- LF1E- LF1E-E Length (mm) V (voltage range: 1.6 to 6.4V ) Input urrent (typ.) (at rated input) 175m 35 m 55 m 7 m 95 m Power onsumption (typ.) (at rated input) 4.W.4W 1.6W 16.W.W Insulation Resistance 1 MΩ minimum (5V megger) between input and housing ielectric Strength 5V, 1 minute Vibration Resistance (damage limits) Frequency 5 to 55 Hz, mplitude.17 mm Shock Resistance (damage limits) 3 m/s Operating Temperature 4 to +4 (no freezing) Operating Humidity 45 to 5% RH (no condensation) Storage Temperature 4 to +7 (no freezing) Operating tmosphere corrosive gases Life (te 1) 4, hours (The total illumination duration where the illuminance maintains a minimum of 7% of the initial value in 5 environment.) Weight (approx.) (te ) 15g 75g 39g 515g 69g egree of protection IP54 Materials End cover, conduit: polyamide over: polycarbonate : PV Mounting bracket: stainless steel te 1: LE life depends on the operating environment. te : ual lens Use lass power supply when using the LF1E as UL/c-UL listed LE illumination unit. LE Optical Specifications (clear lens) Illumination olor Warm white olor Temperature (typ.) 5K 3K Lens Unit Length Illuminance 9 mm 63 lx 4 lx 55 mm 95 lx 75 lx Reference -lens (te) mm 11 lx 9 lx Illuminance 166 mm 1 lx 95 lx (typ.) (Measured 145 mm 15 lx 1 lx at. directly 9 mm 1 lx 14 lx below the unit) ondensing 55 mm 195 lx 15 lx Lens mm lx 155 lx (te) 166 mm lx 155 lx 145 mm lx 155 lx ual Lens See the illuminance distribution chart on page 3. te: LE modules and illumination units may vary in illumination colors and illuminance. Part. evelopment LF1E - 3 S - N Length (mm) : 9 : 55 : : 1,66 E: 1,45 over 3: lear 4: egree of Protection S : IP54 ccessories Light istribution (Lens) lank: lens : ondensing lens : ual lens LE color N: (5 K equivalent) L: Warm white (3 K equivalent) Input Voltage : 4V Item Part. Package Quantity LF9Z-1SE1PN5 5 Five mounting screws are supplied (one mounting screw is used for a mounting bracket) Number of mounting brackets supplied: LF1E- (), LF1E- (3), LF1E- (4) and LF1E-E (4) When installing the LF1E unit in the place subject to excessive vibrations, supply additional mounting brackets. See page 3 for dimensions. Illuminance istribution hart -lens (35) 9 45 Minimum Radius 4 mm (%) 9 45 Recommended mounting centers () L 6 6 ø.1 Illumination hart (reference value of 5K at.. ual lens type at 5 mm.) 4 max. nti-rotation Hole (Use one) (supplied) M4 P.7 tapped hole or ø4. hole M4 screw (supplied) Mounting Screw 36(supplied) M4 P.7 nti-rot Model L. of Mounting rackets LF1E LF1E LF1E LF1E LF1E-E ondensing Lens ual Lens X: long side (%) 9 -lens (LF1E-E3S-N) ondensing Lens (LF1E-E3S-N) ual Lens (LF1E-E3S-N) Y(mm) X(mm) 45 ø 1. max. 1 Y: short side Y (short side) image Y (short side) image Y (short side) image Y(mm) X(mm) Y(mm) ll dimensions in mm X(mm) (13//15) (13//15) 3

13 TM LF Series djustable ngle Mounting angle can be adjusted from to 9. LE illumination units can be installed flexibly. Mounting angle can be adjusted from to 9 in 1 increments, providing more options for mounting of the LE illumination units. Illumination angle can be adjusted to suit the operator in various applications, such as visual inspection. LF9Z-1M1 LF9Z-1ME1 Hexagonal bolt LF9Z-1MF1 EF1 Flameproof LE Illumination Units an be used in hazardous area of Zone 1 and, where hydrogen or acetylene gas are present. Various mounting styles. ondensing or diffused light distribution characteristics. Screw terminal, spring clamp terminal, and lead wire connection are available. IP67 (IE 659) Explosion-proof lass Ex d II T4 pplication Example djustable ngle djustable ngle for LF1/LF1 LF9Z-1ME R45 Part. pplicable LE Illumination Unit Material Package Quantity LF9Z-1ME1 LF1-E 1 pair (right and left) LF9Z-1MF1 LF1-F Stainless Steel (mounting screws supplied) LF9Z-1M1 LF1-, -, - (not -) (73) LF9Z-1MF1 Use the attached hexagonal bolts to fix the LF1 at the desired angle. See specifications of the LF1 for operating environment and mechanical strength. 4-M5 screws LF Series LE Illumination Units Safety Precautions o not disassemble, repair, or modify the LE illumination unit. Otherwise electric shock, fire, or malfunction may occur. Turn off power before wiring. Make sure of correct wiring, otherwise electric shock or damage may result. o not stare directly into the LE illumination unit while it is lit, and do not project the light to other people, otherwise eyes may be injured. Instructions LE modules may vary in illumination colors and illuminance. efore designing equipment and powering up illumination units, confirm the specifications described in the instruction sheet. pply voltage within the rated value, otherwise the LE elements may be damaged. The illumination unit is vulnerable to static electricity. Take sufficient measure for protection against static electricity and voltage surges. Make sure that the illumination unit does not fall during transportation, installation, and operation, otherwise damage may result. o not pull or push the cable of the illumination unit, otherwise damage may result. llow sufficient slack to the cable while wiring. o not apply excessive force. o not leave a damaged illumination unit unattended or use a damaged illumination unit. Ensure the correct operating temperature. Otherwise internal temperature rise may result in damage. o not use or store in a place subjected to vibration and shock R6 75 Part. E F G LF9Z-1ME1 5 ±. 374 ±. 4-M5 LF9Z-1MF1 4 ± M5 LF9Z-1M1 14 (te) 4-M4 te: Same as the mounting hole centers of LE illumination units (7.5) LF9Z-1M ll dimensions in mm. LE illumination unit is general-purpose industrial electric device. o not use for electronic equipment which may damage the human body or threaten life in case a malfunction or failure occurs. Ensure that the cable does not touch the LE illumination unit. o not use in the following places: Exposed to direct sunlight, near heaters, high temperatures Subject to chemicals, and corrosive gases (Plastic illumination surface: Iron powder and oil) asements, greenhouses, or other humid places old storage warehouses (make sure that no freezing occurs) o not loosen screws, otherwise the protection characteristics will be impaired. For the LF illumination units, make sure to provide sufficient strength for mounting panel. Required waterproof characteristics cannot be obtained if a distorted mounting panel is used. To clean the cover, use a soft cloth with water or neutral detergent. o not use solvents such as thinners, benzene, or alkaline, otherwise discoloration, deterioration, or decrease in strength may occur. The edge of the cable sheath is not waterproof construction. Water may invade the LF1 in a capillary action when water splashes directly onto the cable sheath. Input 1 to 4V 4V Light istribution ondensing iffused ondensing iffused Specifications irect Mounting ngle djustable irect Mounting ngle djustable irect Mounting ngle djustable irect Mounting ngle djustable lamp Waterproof Part. EF1-1 EF1-11 Explosion Protection Ex d II T4 Installation rea Zone 1, Zone 1 to 4V 4V Voltage Range 9 to 64V 1 to 6.4V Power onsumption (typ.) (at rated voltage) 19W 16W Insulation Resistance 1MΩ minimum (5V megger) (between input and ground) ielectric Strength,V, 1 minute (between input and ground) Vibration Resistance (damage limits) Frequency 5 to 55 Hz, amplitude.5mm Shock Resistance (damage limits) 1, m/s Operating Temperature to +5 (no freezing) Operating Humidity 45 to 5% RH (no condensation) Storage Temperature 35 to +7 (no freezing) pprox. 5, hours minimum Service Life (te) (The total illumination duration where the illuminance maintains a minimum of 7% of the initial value in 5 environment.) egree of Protection IP67 (IE 659), IP65 (with ON/OFF switch) : aluminium, front panel/mounting bracket: Material stainless steel, illumination surface: reinforced glass, cable gland: nickel-plated brass Weight (approx.) 3.kg (direct mounting) 3.4kg (with mounting bracket) te: LE life depends on the operating environment. lear glass: lank Translucent glass: 1 Terminal lock Spring clamp: lank Screw: S Lead wire: pplicable iameter 1: ø to ø1 1: ø1 to ø1 14: ø1 to ø14 16: ø14 to ø16 Specify "T" before in the part number for both input and output ends to have a cable gland. pplicable cable diameter is the same for both ends. Part. example: EF1-1WT-1 Specify P before and - at the end of the part number when the input end has cable gland and the output end has ON/OFF switch. Part. example: EF1-11W1P-1- Part. evelopment E F W 1 P S 1 W 1: 4V : Universal voltage (1 to 4V ) lank: lear glass 1: Translucent glass Light istribution lank: ondensing light (with lens) 1: iffused light (without lens) gland & ON/OFF switch lank: gland on one end/ without ON/OFF switch T: gland on both ends/ without ON/OFF switch P: gland on one end/ with ON/OFF switch Package quantity: 1 Part. EF1-1 W - EF1-1 W - W EF1-1 W - EF1-1 W - W EF1-1 W - EF1-1 W - W EF1-1 W1 - EF1-1 W1 - W EF1-1 W1 - EF1-1 W1 - W EF1-1 W1 - EF1-1 W1 - W EF1-11 W - EF1-11 W - W EF1-11 W - EF1-11 W - W EF1-11 W - EF1-11 W - W EF1-11 W1 - EF1-11 W1 - W EF1-11 W1 - EF1-11 W1 - W EF1-11 W1 - EF1-11 W1 - W ON/OFF switch : extended (maintained) gland lank: lamp with waterproof W: lamp without waterproof pplicable iameter 1: ø to 1 (G1/) 1:ø1 to 1 (G1/) 14:ø1 to 14 (G3/4) 16:ø14 to 16 (G3/4) lank: out (direct mounting) : mounting bracket : ngle adjustable mounting bracket Terminal lock lank: Spring clamp terminal block S: Screw terminal block : Lead wire 4 (13//15) (13//15) 5

14 EF1 Flameproof LE Illumination Units EF1-1 WP 96 lm 11 lx EF1-1 W1 5 lx 45 lx EF1-1 W1P 175 lx TIIS Type Test pproval. out T19541 T1954 out T1954 T M4 Ground Terminal 15 Illumination istribution hart (unit: cd/1 lm) M6 Effective thread: Gland: or to 59.5 /: 5.5 to 59.5 /: 53 to 6 iffused Light (lx) : Translucent glass (with lens) ON/OFF Switch: only =3 53 to 6 : lear glass (without lens) 1 =3 : Translucent glass (without lens) 1 1 pplicable Gland iameter X ode 1 < X < X < X < X 16 1W < X 1 1W 1 < X 1 14W 1 < X 14 16W 14 < X 16 *: minal size E ( ) G1/ (16) G1/ (16) G3/4 () G3/4 () G1/ (16) G1/ (16) G3/4 () G3/4 () lamp Waterproof out ondensing Light (lx) out Gland: only (mm) E Illuminance istribution at 1.m (reference value) : lear glass (with lens) ll dimensions in mm. * See below for the dimensions of and M4 Ground Terminal ø. : Translucent glass (without lens) ø 1 15 : lear glass (without lens) ø iffused Light : Translucent glass (with lens) 9 ±4 ø6.5 (G1/) ø31.5 (G3/4) ondensing Light 4-ø6. 15 ±.4 77 Same model range includes voltage, illumination surface glass, cable gland type and size. : lear glass (with lens) irect Mounting 57 ±.3 (condensing light) (condensing light) out (diffused light) out (diffused light) EF1-1 W 5,7K ON/OFF switch Lens 3 xis enter 7 ±. Illumination olor olor Temperature (typ.) Total Luminous Flux (typ.) Reference Illuminance (typ.) (at 1.m directly below) Part. Lens lear glass Translucent glass out out (condensing (condensing (diffused light) (diffused light) light) light) irect Mounting 37.5 TIIS ertified Products of the Same Model 5. LE Optical Specifications EF1 Flameproof LE Illumination Units o not disassemble, repair, or modify the LE illumination unit. Otherwise electric shock, fire, or malfunction may occur. Special expertise is required to install, operate, maintain, and inspect the EF1. People without such expertise must not use the Safety Precautions E Instructions M4 Ground Terminal M4 Ground Terminal * See page 7 for the dimensions of and. ll dimensions in mm egree of protection for the EF1 is IP67 (with ON/OFF switch: IP65). o not use in harsher environment.. Operating temperature is to +5. When the surface temperature of EF1 might exceed +5 due to direct sunlight, provide a shade to keep the surface temperature below When installing the EF1, observe safety standards and regulations of the relevant country or region. Installation 1. For direct mounting without mounting bracket, use four M6 bolts. When using mounting brackets, use four M bolts or install firmly so that equivalent mounting strength is provided. Mounting bracket is 3 mm thick (see dimensions). Recommended tightening strength is as follows. M6: 3.9 to 5.4 N m, M: 1 to 13.5 N m.. If bolt loosening is expected due to vibrations, use spring washers. Installing/Removing the End over 3. 6 M4 Ground Terminal 3 M4 Ground Terminal xis enter xis enter 5. Installation rea W/ 9 W/ngle djustable EF1. Otherwise electric shocks, damage, or malfunction may result. Read this catalog and instruction sheet carefully before using the EF1. (13//15) 1. When removing the end cover, use a hex key supplied with the EF1 to remove the end cover bolts (M6 1 hex socket head cap bolt with spring washer and plain washer). o not lose the end cover bolts. (13//15). The end cover is inserted into the housing. When installing the end cover, make sure that the end cover is inserted straight. 3. When installing the end cover, observe the followings. foreign objects are on the gasket or joint surface. The gasket is in place. The wires are not caught between the joint surfaces. Install the end cover slowly and tighten screws to a torque of 3.9 to 5.4 N m. te: Make sure that the bolts are tightened securely. rawing a Use the flameproof packing type cable gland supplied with the EF1. Refer to the dimensions. See onnecting a to the Flameproof Packing Type Gland for details. When choosing a cable, take maximum operating temperature and chemical resistance of insulator and sheath into consideration. The inside of cable must be as solid as possible to prevent ingress of explosive gas through the cable, and smooth on surface and round in cross-section. When choosing the size and insulation material, take the temperature rise of cable into consideration. Protect the cable against external damage by encasing in a metal conduit, or in a metal/cement duct. 7