Lumifa. LED Lighting. Seletion Guide Heavy Duty Machine Tool Lighting... 4 LF1D & LF2D Series...4

Transcription

1 LED Lighting Seletion Guide... 2 Heavy Duty Machine Tool Lighting... 4 LF1D & LF2D Series...4 General Machine Lighting LF2B Series...11 LF1B-N Series...13 LF1A Series...16 Refrigerator, Freezer, Test Chamber Lighting.18 LF1E Series...18 Hazardous Location Lighting EF1A Series...21 Flat Panel Inspection Lighting LF1F Series Table of Contents LED Lighting - Pg. 1 Automation & Sensing - Pg. 27 Safety - Pg. 272 Switching & Controls - Pg. 469 Index - Pg. 967

2 Selection Guide LED Lighting Selection Guide Selection Guide Application Examples Illumination Color 1 Reference Illumination 2 Power Consumption Operating Voltage Page Mini LF1D-C (IP67f/IP67/IP69K) Machine tools Food processing machines Automatic manufacturing machines Printing machines Production system Test equipment White (5,7K) 18lx 4.6W 24V DC LF1D/2D Slim & Wide LF1D/2D Classic (IP67f/IP67) LF1D/2D-*H Wide-angle & High Luminance (IP67f/IP67/ IP69K) Slim Wide Slim Machine tools Food processing machines Automatic manufacturing machines Printing machines Production system Test equipment White (5,7K) White (5,7K) Clear Surface: 1,1lx (4,4lx directly below at.5m) Diffused surface: 1,lx (4,lx directly below at.5m) 1,45lx 9W 12.5W 11W 24V DC 24V DC 4 Wide 1,2lx 12.5W Long LF1D-H (IP67f/IP67/ IP69K) LF1D-J (IP67f/IP67/ IP69K) Machine tools Food processing machines Automatic manufacturing machines Printing machines Production system Test equipment Neutral White (4,7K) 3 56lx 18.4W 84lx 27.6W 24V DC LF2B (IP65) Clear Cover White Cover Various machines and systems Control panel Plant Solar power equipment White (5,5K) LF2B-B: 23lx LF2B-C: 425lx LF2B-D: 71lx LF2B-E: 93lx LF2B-F: 1,16lx LF2B-B: 215lx LF2B-C: 39lx LF2B-D: 645lx LF2B-E: 835lx LF2B-F: 1,4lx 12/24V DC LF2B-B: 2.6W LF2B-C: 4.9W LF2B-D: 1.6W 1 to 24V AC LF2B-B: 3.8W LF2B-C: 7.5W LF2B-D: 9.2W LF2B-E: 14.3W LF2B-F: 21.8W 12/24V DC 1 to 24V AC K: Color Temperature (typ.), mm: Dominant Wavelength (typ.). 2. Directly below at unless otherwise noted. 3. To match traditional cool fluorescent lamps. 2

3 LED Lighting Selection Guide Application Examples Illumination VColor 1 Reference Illumination 2 Power Consumption Operating Voltage Page LF1B-N (IP65) Clear/ White Cover Control panel Display Cases Plant equipment Test equipment Food processing machines Cosmetic plant Chemical plant Show cases Semiconductor manufacturing equipment IC foundry Photosensitive material Semiconductor manufacturing equipment Darkroom experiment Advertising Display Light ornaments Cool white (5,5K)zzzzzz Warm white (2,9K) Yellow (59nm) Red (62nm) Blue (455nm) Green (525nm) LF1B-NA: 9lx LF1B-NF: 935lx LF1B-NA: 6lx LF1B-NF: 62lx LF1B-NA: 2lx LF1B-NF: 18lx LF1B-NA: 1lx LF1B-NF: 8lx LF1B-NA: 3lx LF1B-NF: 3lx Cool white/warm white/blue LF1B-NA: 1.5W LF1B-NB: 2.9W LF1B-NC: 4.4W LF1B-ND: 8.7W LF1B-NE: 13.W LF1B-NF: 17.3W Yellow/Red/Green LF1B-NA: 1.W LF1B-NB: 2.W LF1B-NC: 2.9W LF1B-ND: 5.8W LF1B-NE: 8.7W LF1B-NF: 11.6W 24V DC 13 LF1A (IP4) Clear Cover Control Panels Manufacturing Equipment Cool white (5,5K) Warm white (2,8K) Yellow (59nm) Red (625nm) LED Array 3x2: 19lx LED Array 6x2: 38lx LED Array 12x2: 76lx LED Array 3x2: 13lx LED Array 6x2: 26lx LED Array 12x2: 52lx LED Array 3x2: 1.8W LED Array 6x2: 3.6W LED Array 12x2: 7.2W LED Array 3x2: 13lx LED Array 6x2: 26lx LED Array 12x2: 52lx LED Array 3x2: 2.2W LED Array 6x2: 4.4W LED Array 3x2: 85lx LED Array 12x2: 8.7W LED Array 6x2: 17lx LED Array 12x2: 34lx 24V DC 16 LF1E (IP54) Condensing Lens Freezer and refrigerated display cases and test chambers Cool white (5,K) Warm white (3,K) Cool white LF1E-A: 1,8lx LF1E-B: 1,95lx LF1E-C: 2,lx LF1E-D: 2,lx LF1E-E: 2,lx (directly below at 3cm) LF1E-A: 4.2W LF1E-B: 8.4W LF1E-C: 12.6W LF1E-D: 16.8W LF1E-E: 22.8W 24V DC 18 EF1A (IP67) For Hazardous Locations: Oil, gas & mining industries Printing factory Gas station Water Treatment White (5,7K) Clear glass surface: 1,1lx (condensing light) 25lx (diffused light) Translucent glass: 45lx (condensing light) 175lx (diffused light) 19W 17W 1 to 24V AC 24V DC 21 LF1F Visual inspection Elevator ceiling 8,5K 5,8lx 11W 21.6 ~ 26.4V DC K: Color Temperature (typ.), mm: Dominant Wavelength (typ.). 2. Directly below at.5m unless otherwise noted. 3. Light output using clear cover IDEC (4332) USA & Canada 3

4 LF1D & LF2D LED Lighting Key features Mini (LF1D-C) Cable Location Length LF1D (IP69K) and LF2D (IP67, IP67f) Series Machine Tools Food & Beverage Processing Equipment Vision Systems their rugged construction, the LF1D/2D series of light units are ideal for machine tools, automated label and package inspection equipment, and food and beverage processing equipment. Their design provides equally brilliant light at the center or edges of the units. Plus with their ratings, the LF1D (IP67, IP67f, IP69K) and LF2D (IP67, IP67f) can be used where high-pressure and high-temperature washdowns are used. LF1D & LF2D Mini (LF1D-C) Compact unit only 1 x 5 x 25mm Single phosphor LED module design eliminates multiple shadows while distributing light over a wide area (12º) Slim & Wide (LF1D/2D-E, EH, F, FH) Brightness: Standard Models: up to 1,1lx at High-Luminance Models: up to 1,45lx at Available with terminal block or spring clamp connections for easy installation Angle adjustable mounting brackets provide installation flexibility Long (LF1D-H/J) Two lengths available: 365mm and 5m The flat light design reduces glare and multiple shadows, improving visibility from a distance Part Numbers Part Number Long (LF1D-J 365mm) Long (LF1D-J 5m) Cable Cable Part Number Location Length Location Length C R US Part Number Side Back 3m 5m 3m 5m LF1D-C2F-2W-33 LF1D-C2F-2W-35 LF1D-C2F-2W-43 LF1D-C2F-2W-45 Side Back 5m LF1D-H2F-2N-35 5m LF1D-J2F-2N-35 Side 1.5m + M12 connector LF1D-H2F-2N-3B 1.5m + M12 connector LF1D-J2F-2N-3B 5m LF1D-H2F-2N-45 5m LF1D-J2F-2N-45 Back 1.5m + M12 connector LF1D-H2F-2N-4B 1.5m + M12 connector LF1D-J2F-2N-4B Slim and Wide Surface Mounting (LF1D/-E, EH, F, FH) Model Slim Model (1 LEDs 1 row) Wide Model (7 LEDs 2 rows) Cable Gland LF9Z-A11 Cable LF9Z-C5 Mounting Bracket LF9Z-B11,B12 Clear Reinforced Glass Clear Polycarbonate Clear Reinforced Glass Clear Polycarbonate (hole on the side) LF1D-Ej2F-2W LF1D-Ej2F-2W-11 LF1D-Ej3G-2W LF1D-Ej3G-2W-11 LF1D-Fj2F-2W LF1D-Fj2F-2W-11 LF1D-Fj3G-2W LF1D-Fj3G-2W-11 (hole on the back) LF1D-Ej2F-2W-2 LF1D-Ej2F-2W-21 LF1D-Ej3G-2W-2 LF1D-Ej3G-2W-21 LF1D-Fj2F-2W-2 LF1D-Fj2F-2W-21 LF1D-Fj3G-2W-2 LF1D-Fj3G-2W-21 (Side) (Back) *In place of j insert H for High-Lluminance or leave blank for Standard models. LF1D-Ej2F-2W-3 LF1D-Ej2F-2W-31 LF1D-Ej2F-2W-35 LF1D-Ej2F-2W-A LF1D-Ej2F-2W-4 LF1D-Ej2F-2W-41 LF1D-Ej2F-2W-45 LF1D-Ej2F-2W-451 LF1D-Ej3G-2W-3 LF1D-Ej3G-2W-31 LF1D-Ej3G-2W-35 LF1D-Ej3G-2W-A LF1D-Ej3G-2W-4 LF1D-Ej3G-2W-41 LF1D-Ej3G-2W-45 LF1D-Ej3G-2W-451 LF1D-Fj2F-2W-3 LF1D-Fj2F-2W-31 LF1D-Fj2F-2W-35 LF1D-Fj2F-2W-A LF1D-Fj2F-2W-4 LF1D-Fj2F-2W-41 LF1D-Fj2F-2W-45 LF1D-Fj2F-2W-451 LF1D-Fj3G-2W-3 LF1D-Fj3G-2W-31 LF1D-Fj3G-2W-35 LF1D-Fj3G-2W-A LF1D-Fj3G-2W-4 LF1D-Fj3G-2W-41 LF1D-Fj3G-2W-45 LF1D-Fj3G-2W

5 LED Lighting LF1D & LF2D Slim and Wide Recessed Mounting (LF2D/-E, EH, F, FH) Cable Gland LF9Z-A11 Model Slim Model (1 LEDs 1 row) Wide Model (7 LEDs 2 rows) Cable LF9Z-C5 Clear Reinforced Glass Clear Polycarbonate Clear Reinforced Glass Clear Polycarbonate LF2D-Ej2F-2W LF2D-Ej3G-2W LF2D-Fj2F-2W LF2D-Fj3G-2W LF2D-Ej2F-2W-2 LF2D-Ej3G-2W-2 LF2D-Fj2F-2W-2 LF2D-Fj3G-2W-2 (Side) (Back) LF2D-Ej2F-2W-3 LF2D-Ej3G-2W-3 LF2D-Fj2F-2W-3 LF2D-Fj3G-2W-3 LF2D-Ej2F-2W-A LF2D-Ej3G-2W-A LF2D-Fj2F-2W-A LF2D-Fj3G-2W-A LF2D-Ej2F-2W-4 LF2D-Ej3G-2W-4 LF2D-Fj2F-2W-4 LF2D-Fj3G-2W-4 LF2D-Ej2F-2W-45 LF2D-Ej3G-2W-45 LF2D-Fj2F-2W-45 LFD-Fj3G-2W-45 *In place of j insert H for High-Lluminance or leave blank for Standard models. Accessories Mounting Bracket Item Fixed Adjustable Angle Cable Gland Cable Part Number LF9Z-B11 LF9Z-B12 LF9Z-1MDE1 LF9Z-1MDF1 LF9Z-A11 LF9Z-C5 Applicable Unit LF1D (Slim) LF1D (Wide) LF1D (Slim) LF1D (Wide) LF1D/2D (Slim & Wide) Material Stainless Steel Brass PVC Notes 1 pair, Left and Right M8* Length: 5m *Applicable wire size (1-12 AWG) Part Number Structure (use for interpreting part numbers only) L F 2 D E H 2 F 2 W 3 Shape 1: Surface mount 2: Recessed mount Size (LED arrangement) C: Mini m (3.94 ) E: Slim Model (1 LEDs 1 row) F: Wide Model (7 LEDs 2 rows) H: Long 365mm (14.37 ) J: Long 5m (2.8 ) Illumination Models (Wide & Slim only) blank: Standard H: large area, High Luminance Degree of Protection F: Clear reinforced glass IP67f (LF2D), IP67f/IP69K (LF1D) G: Clear polycarbonate IP67 (LF2D), IP67/IP69K (LF1D) Illumination Color W: white N: neutral Illumination Surface 2: Clear, Reinforced glass 3: Clear, Polycarbonate 5: Diffused, Polycarbonate (standard wide & slim) 9: Diffused, Reinforced glass (standard wide & slim) Cable Gland Code Blank A B B Cable Gland Cable Gland Hole Location side side side back back side side side side side back back back back back back Cable 5m 1.5m 3 3m 5m 3m 5m 5m 1.5m 3 Mounting Bracket Mounting bracket available for LF1D (wide and slim) only. 2. Only available for LF1D (wide and slim) models m cable with M12 connector for Long only (LF1D-H, J) IDEC (4332) USA & Canada 5

6 LF1D & LF2D LED Lighting Specifications LED Optical Specifications Model Mini Standard High-Luminance Long LF1D-C Slim (LF1D/2D-E) Wide (LF1D/2D-F) Slim (LF1D/2D-EH Wide (LF12D-FH) LF1D-H LF1D-J Illumination Surface Clear Clear Diffused Clear Diffused Clear Diffused Clear Diffused Clear Illumination Color Cool White Neutral White Total Luminous Flux 56lm 6lm 84lm 1,lm 1,26lm 2,lm 3,lm Color Temperature 57K 47K Reference Illuminance at 1.m 18lx 1,1lx 1,lx 1,1lx 1,lx 1,45lx 1,2lx 1,45lx 1,2lx 56lx 84lx LED modules and illumination units may vary in color and brilliance. Luminous flux, color temperature, and illuminance values shown above are typical. General Specifications Model Mini Standard High-Luminance Long LF1D-C Slim (LF1D/2D-E) Wide (LF1D/2D-F) Slim (LF1D/2D-EH Wide (LF1D/2D-FH) LF1D-H LF1D-J Rated Voltage 24V DC Voltage Range 21.6 to 26.4V DC Rated Power (typ.) 4.6W 9W 12.5W 11W 12.5W 18.4W 27.6W Insulation Resistance 1MΩ minimum (5V DC megger) Dielectric Strength 1,V AC, 5/6Hz, 1 minute Vibration Resistance (damage limits) LF1D-C Frequency 5 LF1D/2D-EH to 55Hz, amplitude.5mm LF1D/2D-FH Shock Resistance (damage limits) (lx) (lx) /s 2 (lx) Operating Temperature 45 3 to +55 C (no freezing) 1,2 1,2 Operating Humidity 45 to 85% RH (no condensation) Storage Temperature to +7 C (no freezing) 8 Operating Environment No corrosive gases Life , hours (The illumination duration in which the 4illuminance maintains a minimum of 7% of the 4initial value at 25ºC.) Degree of Protection 2 IP67f (LF2D: reinforced glass), IP67 (LF2D: polycarbonate), IP69K (LF1D) -8-4 Housing: Diecast 4aluminum 8(mm) (LF1D/LF2D),-8 Lens: Reinforced -4 glass or 4 polycarbonate 8(mm) (LF1D/LF2D) -8 Material 3 Cover: Stainless steel (LF1D), Flange cover: Diecast aluminum (LF2D) LF1D-H LF1D-J (lx) LF1D-E*-2W*: 75g LF1D-F*-2W*: 8g(lx) LF1D-E*-2W*: 75g LF1D-F*-2W*: 8g Weight (approx.) LF1D-E*-2W-A*: 95g LF1D-F*-2W-*: 1,g LF1D-E*-2W-A*: 95g LF1D-F*-2W-*: 1,g 42g 9 LF2D-E*-2W*: 85g LF2D-F*-2W*: 9g9 LF2D-E*-2W*: 85g LF2D-F*-2W*: 9g 12g 16g LF2D-E*-2W-A*: 1,g LF2D-F*-2W-A*: 1,5g LF2D-E*-2W-A*: 1,g LF2D-F*-2W-A*: 1,5g 1. LED life depends on the operating environment Waterproof or oil-proof characteristics specified by IEC 6529 and JEM13. For illumination units without accessories, use a cable gland and cables that satisfy IP67f or IP67 degree of protection. 3. The reinforced glass and polycarbonate illumination surfaces have the same appearance, but have different degrees of protection (IP67f or IP67). 3 3 (mm) (mm) (mm) Terminal Block Wiring Slim Type Wide Type Illuminance Charts Illuminance Distribution Charts(reference value/unit : cd/1lm) LF1D-C LF1D/2D-EH LF1D/2D-FH Applicable ferrules:.25 to.75 mm 2 Recommended source - Phoenix Contact: AI,25-12 BU, AI,34-12 TQ, AI,5-12 WH, AI,75-12 GY 6 3 LF1D-H LF1D-J ,2 1 1, ,2 3 A C B B 2 2 C A

7 LED Lighting LF1D & LF2D Distribution Characteristics Characteristcs (lx) LF1D-C LF1D/2D-EH LF1D/2D-FH (lx) 45 1,2 1,2 (lx) (lx) (mm) LF1D-H (mm) (lx) LF1D-J (mm) (mm) (mm) Illuminance Distribution Charts( Internal Circuit LF1D-C Housing LF1D/2D-E, EH, F, FH Housing LF1D-H/J Housing (+) () Constant Current Circuit + LED (+) () Constant Current Circuit + LED (+) () Constant Current Circuit + LED Dimensions (mm) LF1D-C Mini 2-ø Cable Illumination Surface 25 Front Cover Cable Length Housing Brown: + 24V DC Blue: V DC Partially-stripped ( 2) 24AWG (23.9) ø8 (Note) Note: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. Also, provide a proper sealing. Recommended M5 screw: Screw head height: 9.5mm max. Screw head diameter: m max. Screw length: 2mm min. Recommended washer diameter: m max M5 tapped hole or ø5.2 hole IDEC (4332) USA & Canada 7

8 LF1D & LF2D LED Lighting LF1D Slim R LF9Z-1MDE1 (Angle Adjustable Mounting Bracket) Angle: ± M4 P.7 Effective thread:m Mounting Bracket 4-M5 Screws Axis Center Illumination Surface 35 (159) (146) 374 ±2 (Note 2) ±1 Front Cover Housing Cable Length: 5m 5 Side Cover ø (Note 1) Brown: L(+) Blue: N () Pink: ( ) Partially-stripped ( 2) 24AWG Angle: (73) R45 Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. Note 2: When using the angle adjustable mounting bracket, the +2. tolerance is when the gasket diameter is larger than ø1 and ø12 or smaller (When using no accessories) ø ±.2 4-M4 P.7 Effective thread: m 35 ±.2 M8 P1. Effective thread: 5mm 4 4 ±.2 R LF9Z-1MDE1 (Angle Adjustable Mounting Bracket) Angle: LF2D Slim 8 65 Panel thickness: 5 max max. 6 Mounting Bracket Axis Center 4-M5 Screws (12) Illumination Surface Housing (17) 6-M5 1 Hexagon Socket + Gasket (supplied with LF2D) Cable Gland (Note) Front Cover ø5 ø Brown: L(+) Blue: N () Pink: ( ) Partially-stripped ( 2) 24AWG Brown: L(+) Blue: N () Pink: ( ) Cable Length: 5m Note: External diameter of cable gland is ø2mm Angle: 9 R (87.5) 9 4 ± ± ±.2 (Note 2) ±1 Waterproof Gasket (suplied with LF2D) +.2 Terminal Block Wiring Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. Note 2: When using the angle adjustable mounting bracket, the +2. tolerance is when the gasket diameter is larger than ø1 and ø12 or smaller. () (+) ± ±.2 4-M5 P.8 Effective thread: m 4-ø5.2 (When using no accessories) 227 ± ø15 (Note 1) 6-M5 Screws M8 P1. Effective thread: 5mm 14.8 Applicable ferrules:.25 to.75mm 2 Recommended source: 12AI.25-12BU, AI.34-12TQ, 8 AI.5-12 WH, AI.75-12GY 2-ø ±

9 LED Lighting LF1D & LF2D LF1D Wide R LF9Z-1MDE1 (Angle Adjustable Mounting Bracket) Angle: M5 P.8 Effective thread:m Mounting Bracket Axis Center (12) Illumination Surface (17) Housing Front Cover Cable Length: 5m ø5 Side Cover 15.7 Brown: L(+) Blue: N () Pink: ( ) Partially-stripped ( 2) 24AWG Angle: 9 R Panel thickness: 5 max max. 6 4 ±.2 Axis Center 4-M5 Screws 292 ±2 (Note 2) 6-M5 1 Hexagon Socket + Gasket (supplied with LF2D) Cable Gland (Note) ±1 +.2 ø5 Brown: L(+) Blue: N () Pink: ( ) (87.5) Cable Length: 5m Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. Note: External diameter of cable gland is ø2mm Note 2: When using the angle adjustable mounting bracket, the +2. tolerance is when the gasket diameter is larger than ø1 and ø12 or smaller. Terminal Block Wiring ø5.2 ø15 (Note 1) Waterproof Gasket (suplied with LF2D) (When using no accessories) ± ø5.2 () (+) 6 65 ± ±.2 4-M5 P.8 Effective thread: m 227 ±.2 M8 P1. Effective thread: 5mm 6-M5 Screws 6 6 ±.2 Applicable ferrules:.25 to.75mm 2 Recommended source: AI.25-12BU, AI.34-12TQ, AI.5-12 WH, AI.75-12GY LF2D Wide max. Axis Center 6-M5 1 Hexagon Socket + Gasket (supplied with LF2D) Panel thickness: 5 max 24.8 Cable Gland (Note) ø5 Cable Length: 5m Brown: L(+) Blue: N () Pink: ( ) Note: External diameter of cable gland is ø2mm Waterproof Gasket (supplied with LF2D) Terminal Block Wiring 293 ± ± M5 Screws () (+) Applicable ferrules:.25 to.75mm 2 Recommended source: AI.25-12BU, AI.34-12TQ, AI.5-12 WH, AI.75-12GY IDEC (4332) USA & Canada 9

10 LF1D & LF2D LED Lighting LF1D-H Long LF1D-J Long Illumination Surface 72 ± A Illumination Surface A 72 ± Front Cover Front Cover A Housing A 215 Housing 215 ± ± ±.2 6-ø5.5 (25) Partially-stripped ( 2) 24AWG Brown: +24V DC Blue: Partially-stripped V DC ( 2) 24AWG Brown: +24V DC Side Cover Blue: V DC Cable Length 12.5 (35) Side Cover LF1D-H2F-2*-*B* (M12 connector) Cable Length 12.5 (35) LF1D-H2F-2*-*B* (M12 connector) M5 P M12 connector: SAC-4P-MS SCO/15/1.5 M5 P.8 6-ø5.5 (25) ø4.6 ø4.6 Cable ø8 (Note 1) Cable ø8 (Note 1) 12.7 Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. ±.2 A ø16 hole is necessary when using the LF1D-*2F-2N-*B* (M12 connector type). Note Note 2: Choose 1: When mounting leading the screws cable in from consideration the cable of gland mounting on the plate back, thickness. provide a hole in the mounting plate. A ø16 hole is necessary when using the LF1D-*2F-2N-*B* (M12 connector type). Note 2: Choose mounting screws in consideration of mounting plate thickness. Partially-stripped ( 2) 24AWG Brown: +24V DC Blue: Partially-stripped V DC ( 2) 24AWG Brown: +24V DC Blue: V Side DC Cover 12.7 Mounting Panel Plain Mounting Washer Panel Spring Washer ø14.8 Pin 147 Assignment 46.8 M12 NCconnector: SAC-4P-MS V SCO/15/1.5 DC +24V DC Pin Assignment NC NC V DC Use a connector that satisfies the required degree of +24V protection. DC NC Recommended connector: SAC-4P-1.5-PUR/FS Use a connector that SCOsatisfies the required degree of protection. Recommended connector: Housing SAC-4P-1.5-PUR/FS SCO 9 to 11 Screw Length (Note 2) M5 Screw Plain Washer Spring A-A Washer sec. (enlarged view) (When M5 screw is installed) M5 Screw 12.7 ø14.8 Housing 9 to 11 Screw Length (Note 2) A-A sec. (enlarged view) (When M5 screw is installed) 12.7 Illumination Surface A ± Illumination Surface A 72 ± Front Cover Front Cover A Housing A Housing ±.2 12 ±.2 36 ±.2 12 ±.2 23 ±.2 Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. 23 ±.2 A ø16 hole is necessary when using the LF1D-*2F-2N-*B* (M12 connector type). Note Note 2: Choose 1: When mounting leading the screws cable in from consideration the cable of gland mounting on the plate back, thickness. provide a hole in the mounting plate. A ø16 hole is necessary when using the LF1D-*2F-2N-*B* (M12 connector type). Note 2: Choose mounting screws in consideration of mounting plate thickness. Cable Length 12.5 (35) Side Cover LF1D-J2F-2*-*B* (M12 connector) Cable Length 12.5 (35) LF1D-J2F-2*-*B* (M12 connector) M5 P.8 M12 connector: SAC-4P-MS SCO/15/1.5 M5 P.8 Pin Assignment M12 NCconnector: SAC-4P-MS V SCO/15/1.5 DC Cable +24V DC Pin Assignment NC NC V DC Use a connector that satisfies the required (25) Cable degree of +24V protection. DC NC Recommended connector: SAC-4P-1.5-PUR/FS Use a connector that SCOsatisfies the required (25) degree of protection. Recommended connector: Housing SAC-4P-1.5-PUR/FS SCO 8-ø5.5 Housing 8-ø5.5 ø8 (Note 2) Mounting Panel ø4.6 ø4.6 ø8 (Note 2) Plain Mounting Washer Panel Spring Washer ø14.8 ø to 11 Screw Length (Note 2) 9 to 11 Screw Length (Note 2) M5 Screw Plain Washer Spring A-A Washer sec. (enlarged view) (When M5 Screw M5 screw is installed) A-A sec. (enlarged view) (When M5 screw is installed) 1

11 LED Lighting LF2B Key features LF2B Series Control Panels Industrial Equipment Commercial Products Wide range of input voltages (1-24V AC) for commercial applications, and 12/24V DC are available for battery or industrial usage. Slim units can be used in many applications and installations where space is limited. Rated IP65 (protection from water and dust), LF2B is great for environments where there is water spray. Slim units: 4mm wide x 29mm high One-step installation in a narrow space is possible when using mounting brackets Five Lengths (21/33/58/83/1,8mm) are offered to meet length requirements and illumination coverages Bright and clear white LED illuminates the shapes and colors of target objects Two covers: clear or white C R Part Numbers US *UL applies for DC units only. Illumination Color White Cover Clear Cover White Cover Rated Voltage 1-24V AC 12V/24V DC 1-24V AC 12V/24V DC LF2B-B (2m) LF2B-B3P-ATHWW2-1M LF2B-B3P-BTHWW2-1M LF2B-B4P-ATHWW2-1M LF2B-B4P-BTHWW2-1M LF2B-C (33mm) LF2B-C3P-ATHWW2-1M LF2B-C3P-BTHWW2-1M LF2B-C4P-ATHWW2-1M LF2B-C4P-BTHWW2-1M LF2B-D (58mm) LF2B-D3P-ATHWW2-1M LF2B-D3P-BTHWW2-1M LF2B-D4P-ATHWW2-1M LF2B-D4P-BTHWW2-1M LF2B-E (83mm) LF2B-E3P-ATHWW2-1M LF2B-E4P-ATHWW2-1M LF2B-F (1,8mm) LF2B-F3P-ATHWW2-1M LF2B-F4P-ATHWW2-1M DC12V/24V Length: B (2m), C (33mm), D (58mm) only Part Number Structure (use for interpreting part numbers only) LF2B - C 3 P - ATHWW2-1M Length B: 2m (8.27 ) C: 33mm (12.99 ) D: 58mm (22.83 ) E: 83mm (32.68 ) F: 1,8mm (42.52 ) Cover 3: Clear 4: White DC12V/24V Length: B (2m), C (33mm), D (58mm) only Rated Voltage A: 1/24V AC B: 12V/24V DC Accessories Item Part Number Remarks Mounting Bracket (U-shape) LF9Z-1SB21 Comes with the product (see Note below) Mounting Bracket (L-shape) LF9Z-1SB22 Order separately LF2B-B and -C includes 2 brackets each; LF2B-E 3 brackets, and LF2B-F 4 brackets IDEC (4332) USA & Canada 11

12 LF2B LED Lighting LED Optical Specifications Model LF2B-B (2m) LF2B-C (33mm) LF2B-D (58mm) LF2B-E (83mm) LF2B-F (1,8mm) Illumination Color White Color Temperature 5,5K Luminous Flux (typ.) 18ln 36ln 72ln 1,8ln 1,44ln Cover Clear White Clear White Clear White Clear White Clear White Reference Illuminance (typ.) at 23lx 215lx 425lx 39lx 71lx 645lx 93lx 835lx 1,16lx 1,4lx.5m directly below LED modules and illumination units may vary in illumination colors and illuminance. General Specifications Model Rated Voltage LF2B-B (2m) Specifications LF2B-C (33mm) LF2B-D (58mm) LF2B-E (83mm) 1-24V AC 5/6Hz (Voltage range: 9-264V AC) 12V/24V DC (Voltage range: 1.8-3V DC) LF2B-F (1,8mm) Input Current (typical) AC1~24V AC 33mA 67mA 96mA 149mA 226mA (at the rated voltage) 1 12V/24V DC 215mA 49mA 88mA Rated Power 1~24V AC 3.8W 7.5W 9.2W 14.3W 21.8W (at the rated voltage) 12V/24V DC 2.6W 4.9W 1.6W Insulation Resistance 1MΩ minimum (5V DC megger) Dielectric Strength 1~24V AC 2,V AC 12V/24V DC 1,V AC Vibration Resistance Frequency 5-55Hz, Amplitude.17mm, speed acceleration 2m/s 2, 3 directions, 2 hours each Shock Resistance 3m/s 2, 6 directions, 5 times each Operating Temperature 3 to +55 C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Storage Temperature 35 to +7 C (no freezing) Operating Atmosphere No corrosive gases Life 2 4, hours (Ta = 25 C) (The total illumination life in which the brightness maintains a minimum of 7% of the initial value.) Degree of Protection IP65 (IEC 6529) Material Front Cover: Polycarbonate Resin; End Cover/Cable Gland: Polyamide Resin; Cable: PVC sheathing (24AWG) Weight (approx.) 1~24V AC 2g 255g 4g 52g 645g 12V/24V DC 175g 235g 37g 1. 1V AC input for 1-24V AC; 12V DC input for 12V/24V DC. 2. LED life is dependent on the operating environment and conditions. Illuminance Charts (Clear light at.5m) LF2B-B (2m) LF2B-C (33mm) LF2B-D (58mm) LF2B-E (83mm) LF2B-F (1,8mm) Brown: L (On DC: + ) Blue: N Cable Gland (On DC: ) Cable Length 1 Cable Cover End Cover 12 Dimensions (mm) Unit (mm) Dimension Table Part Number L (mm) Inch LF2B-B P- THWW2-1M LF2B-C P- THWW2-1M LF2B-D P- THWW2-1M LF2B-E P- THWW2-1M LF2B-F P- THWW2-1M 1,

13 LED Lighting LF1B-N LF1B-N Series Control Panels Industrial Machines Commercial Display Cases Key features The LF1B-N series LED light strips are slim and perfect for applications where space is a concern. They come in six different lengths and six distinct colors, making them a very flexible lighting solution. Compact design: 27.5mm wide, 16mm high, and 134 to 1,8mm long 6 Colors: cool white, warm white, yellow, red, blue, green All units come standard with 3 meter connection cables 2 Cover options: clear, white IP65 degree of protection (waterproof, dustproof), suitable for use in wet locations C R US Part Numbers Illumination Color Cool White Warm White Yellow Red Blue Green Appearance LF1B-NA (134mm) LF1B-NB (2m) LF1B-NC (33mm) LF1B-ND (58mm) LF1B-NE (83mm) LF1B-NF (1,8mm) LF1B-NAjP-2THWW2-3M LF1B-NAjP-2TLWW2-3M LF1B-NAjP-2SHY2-3M LF1B-NAjP-2SHR2-3M LF1B-NAjP-2THS2-3M LF1B-NAjP-2SHG2-3M LF1B-NBjP-2THWW2-3M LF1B-NBjP-2TLWW2-3M LF1B-NBjP-2SHY2-3M LF1B-NBjP-2SHR2-3M LF1B-NBjP-2THS2-3M LF1B-NBjP-2SHG2-3M LF1B-NCjP-2THWW2-3M LF1B-NCjP-2TLWW2-3M LF1B-NCjP-2SHY2-3M LF1B-NCjP-2SHR2-3M LF1B-NCjP-2THS2-3M LF1B-NCjP-2SHG2-3M LF1B-NDjP-2THWW2-3M LF1B-NDjP-2TLWW2-3M LF1B-NDjP-2SHY2-3M LF1B-NDjP-2SHR2-3M LF1B-NDjP-2THS2-3M LF1B-NDjP-2SHG2-3M LF1B-NEjP-2THWW2-3M LF1B-NEjP-2TLWW2-3M LF1B-NEjP-2SHY2-3M LF1B-NEjP-2SHR2-3M LF1B-NEjP-2THS2-3M LF1B-NEjP-2SHG2-3M LF1B-NFjP-2THWW2-3M LF1B-NFjP-2TLWW2-3M LF1B-NFjP-2SHY2-3M LF1B-NFjP-2SHR2-3M LF1B-NFjP-2THS2-3M LF1B-NFjP-2SHG2-3M In place of j insert 3 for clear cover and 4 for white cover. Part Number Structure (use for interpreting part numbers only) LF1B - NC 3 P - 2 THWW2-3M Accessory Length A: 134mm (5.28 ) B: 2m (8.27 ) C: 33mm (12.99 ) D: 58mm (22.83 ) E: 83mm (32.68 ) F: 1,8mm (42.52 ) Cover 3: Clear 4: White Illumination Color THWW2: Cool white TLWW2: Warm white SHY2: Yellow Cable Length 3M: 3m SHR2: Red THS2: Blue SHG2: Green Item Part No. Mounting Bracket- Adjustable Angle LF9Z-1MB1 Material Stainless Steel 1. 1 pair, Left and Right. 2. Not applicable to LF1B-ND IDEC (4332) USA & Canada 13

14 LF1B-N LED Lighting LED Optical Specifications Specifications Illumination Color Cool White Warm White Yellow Red Green Blue Cover Clear White Clear White Clear White Clear White Clear White Clear White Color Temperature/ Dominant Wavelength (typ.) 5,5K 2,9K 59nm 62nm 525nm 455nm LF1B-NA 9lx 8lx 6lx 55lx 2lx 18lx 2lx 18lx 3lx 27lx 1lx 9lx LF1B-NB 22lx 2lx 145lx 13lx 4lx 36lx 4lx 36lx 6lx 55lx 2lx 18lx Reference LF1B-NC 4lx 36lx 25lx 225lx 75lx 65lx 75lx 65lx 11lx 1lx 3lx 27lx Brightness (typ.) at.5m LF1B-ND 66lx 6lx 455lx 41lx 125lx 11lx 125lx 11lx 19lx 17lx 5lx 45lx LF1B-NE 82lx 74lx 56lx 5lx 16lx 145lx 16lx 145lx 26lx 235lx 6lx 55lx LF1B-NF 935lx 85lx 62lx 555lx 18lx 16lx 18lx 16lx 3lx 27lx 8lx 7lx LED modules and illumination units may vary in illumination colors and brightness. General Specifications Model Rated Voltage Input Current (typ.) (at the rated current) Power Consumption (typ.) (at the rated voltage) Insulation Resistance Dielectric Strength Vibration Resistance (damage limits) LF1B-NA (134mm) LF1B-NB (2m) LF1B-NC (33mm) LF1B-ND (58mm) LF1B-NE (83mm) LF1B-NF (1,8mm) 24V DC (operating voltage range: 21.6 to 26.4V) cool white/warm white/blue 6mA 12mA 18mA 36mA 54mA 72mA red/yellow/green 4mA 8mA 12mA 24mA 36mA 48mA cool white/warm white/blue 1.5W 2.9W 4.4W 8.7W 13.W 17.3W red/yellow/green 1.W 2.W 2.9W 5.8W 8.7W 11.6W 1MΩ minimum (5V DC megger) 1,V AC, 1 minute (between live and dead parts) Frequency: 5 to 55Hz, Amplitude.5mm Acceleration 6m/s 2 (6G), 2 hours each in 3 axes Frequency: 5 to 55Hz, Amplitude.17mm Acceleration 2m/s 2 (2G), 2 hours each in 3 axes Shock Resistance (damage limits) 1,m/s 2 (1G), 5 shocks each in 6 axes 3m/s 2 (3G), 5 shocks each in 6 axes Operating Temperature 3 to +55 C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Storage Temperature 35 to +7 C (no freezing) Operating Atmosphere No corrosive gases Life (Note) 4, hours (Ta = 25 C) (The total illumination life in which the brightness maintains a minimum of 7% of the initial value.) Degree of Protection IP65 (IEC 6529) Material Cover: polycarbonate, End cover/cable gland: polyamide, Wire: PVC (24AWG) Weight (approx.) 95g 125g 165g 255g 43g 74g 1. LED life depends on the operating environment. 14

15 LED Lighting LF1B-N LF1B-NA3P-2THWW2- Brilliance Distribution at.5m (reference value) 15 lx 3 lx 45 lx 6 lx LF1B-NB3P-2THWW2-3 lx 6 lx 9 lx 12 lx 15 lx LF1B-NC3P-2THWW2-1 lx 15 lx 2 lx 25 lx 3 lx LF1B-ND3P-2THWW2- LF1B-NE3P-2THWW2- LF1B-NF3P-2THWW2-1 lx 1 lx 25 lx 25 lx 4 lx 4 lx 5 lx 55 lx 6 lx 7 lx 1 lx 3 lx 5 lx 7 lx 9 lx Dimensions (mm) A B 35. Dimension Table A B C Model mm inch mm inch mm inch LF1B-NA R R2.1 C 3, LF1B-NB LF1B-NC LF1B-ND LF1B-NE LF1B-NF IDEC (4332) USA & Canada 15

16 LF1A LED Lighting LF1A LF1A Series Control Panels Manufacturing Equipment Key Features LF1A LED strips use super-bright multi-chip LEDs providing illumination equivalent to a 25W fluorescent lamp, while consuming only one-third the power. They come in a thin housing available in three sizes with four color configurations: cool white (55K), warm white (28K), yellow (59nm) and red (625nm). Brightness: 66.6 Lumens/Watt Energy savings: One-third of fluorescent lamps Long life: 4, hrs (Half-life) UL Listed RoHS Compliant IP4 C R US Part Numbers Color Cool White Warm White Yellow Red Part No. LF1A-*-2THWW6 LF1A-*-2TLWW6 LF1A-*-2SHY8 LF1A-*-2SHR8 Appearance Light Spectrum *LED Array A1 = 3x2, B1 = 6x2, D1 = 12x2 Part Number Structure (use for interpreting part numbers only) L F 1 A A1 2 THWW6 LED Module Arrangement A1: 3 LEDs 2 rows B1: 6 LEDs 2 rows D1: 12 LEDs 2 rows LED Illumination Color THWW6: Cool White TLWW6: Warm white SHY8: Yellow SHR8: Red Accessory Item Mounting Bracket- Adjustable Angle Part No. LF9Z-1MA1 Material Stainless Steel 1 pair, Left and Right 16

17 LED Lighting LF1A LED Optical Specifications Model LF1A-*-2THWW6 LF1A-*-2TLWW6 LF1A-*-2SHY8 LF1A-*-2SHR8 Illumination Color Cool White Warm White Yellow Red Luminous Intensity (Single LED module) Color Temperature / Dominant Wavelength Reference Illuminance at.5m *LED Array A1 = 3x2, B1 = 6x2, D1 = 12x2 General Specifications Specifications 6,mcd 4,mcd 4,mcd 2,5mcd 5,5K 2,8K 59nm 625nm LED Array 3 x 2 19lx 13lx 13lx 85lx LED Array 6 x 2 38lx 26lx 26lx 17lx LED Array 12 x 2 76lx 52lx 52lx 34lx Model LF1A-*-2THWW6 LF1A-*-2TLWW6 LF1A-*-2SHY8 LF1A-*-2SHR8 Rated Voltage 24V DC (non-polarized) LED Array 3 x 2 75mA 9mA Input Current LED Array 6 x 2 15mA 18mA (at rated voltage) LED Array 12 x 2 3mA 36mA LED Array 3 x 2 1.8W 2.2W Rated Power LED Array 6 x 2 3.6W 4.4W (at rated voltage) LED Array 12 x 2 7.2W 8.7W Dielectric Strength Between live and dead parts: 1V AC, 1 minute Insulation Resistance Between live and dead parts: 1 MΩ (5V DC megger) Operating Temperature -2 to +5 C Storage Temperature -25 to +7 C Operating/Storage Humidity 45 to 85% RH (no condensation) Life (half luminance) 2 4, hours Weight (approx.) LF1A-A1: 19g, LF1A-B1: 27g, LF1A-D1: 47g Degree of Protection IP4 1. *LED Array A1 = 3x2, B1 = 6x2, D1 = 12x2 2. LED life depends upon operating environment. Illuminance Chart LF1A-D1-2THWW6 1 5lx 5lx 1lx 2lx 5lx 5 1lx 2lx 3lx 4lx 5lx Light Distribution at.5m LF1A-D1-THWW6 (Cool White) (lx) lx 5lx 5lx (mm) 1 A 1 R C (mm) ø5 Dimensions (mm) Dimension Table Part No. A B C 3 LF1A-A LF1A-B LF1A-D B IDEC (4332) USA & Canada 17

18 LF1E LED Lighting Key features LF1E Series Freezers Refrigerated Display Cases Testing Chambers The LF1E illumination lights are designed to be used in freezers or refrigerated display cases where the ambient temperature is as low as -4ºC. These energy saving units, with a long service life, compact size and low heat generation are perfect for illuminating areas with very low temperatures. Three types of light distribution: no-lens, condensing and dual Life: 7% of initial luminance at 4, hrs Available in 4 lengths Plastic lens suitable for food industry IP54 protection against dust and water CE marked, UL Listed (damp locations) C R US Part Numbers LF1E-B3S-2* (55mm) LF1E-C3S-2* (88mm) LF1E-D3S-2* (166mm) LF1E-E3S-2* (145mm) warm white shown cool white shown cool white shown cool white shown * N = Cool white, L: Warm white. Blank = No lens, A = Condensing Lens, B = Dual Lens. Part Number Structure (use for interpreting part numbers only) L F 1 E B 3 S 2 N A Accessory Length (mm) B: 55 C: 88 D: 1,66 E: 1,45 LED Color Light Distribution (Lens type) N: Cool white (5,K equivalent) Blank: No Lens L: Warm white (3,K equivalent) A: Condensing Lens B: Dual Lens Item Part No. Mounting Bracket Adjustable Angle LF9Z-1SE1 Material Stainless Steel LED Optical Specifications Illumination Color Cool White Warm White Color Temperature 5K 3K Lens Type Unit Length Reference Illumination 55mm 95lx 75lx 88mm 1,1lx 9lx No Lens 1 166mm 1,2lx 95lx 145mm 1,25lx 1,lx 55mm 1,95lx 1,5lx Condensing 88mm 2,lx 1,55lx Lens 1 166mm 2,lx 1,55lx 145mm 2,lx 1,55lx Dual Lens See Illumination Distribution Chart next page Specifications 1. Measured at.3m directly below unit. 18

19 LED Lighting LF1E General Specifications Model (length) LF1E-B (55mm) LF1E-C (88mm) LF1E-D (166mm) LF1E-E (145mm) Rated Voltage Input Current (at rated voltage) 24V DC 35mA (44mA max) 525mA (66mA max) 7mA (87mA max) 95mA (14mA max) Power Consumption (typ. at rated input) 24V DC 8.4W (9.7W max) 12.6W (14.6W max) 16.8W (19.4W max) 22.8W (26.3W max) Insulation Resistance Dielectric Strength Vibration Resistance (damage limits) 24V DC 1 MΩ minimum (5V DC megger) between input and housing 5V AC, 1 minute Frequency 5 to 55Hz, amplitude.17mm Shock Resistance (damage limits) 3m/s 2 Operating Temperature Operating Humidity Storage Temperature Operating Environment Life 1 4 to +4 C 45 to 85% RH (no condensation) 4 to +7 C No corrosive gases 4, hours (The illumination duration in which the illuminance maintains a minimum of 7% of the initial value at 25ºC.) Weight (approx.) 2 275g 39g 515g 69g Degree of protection Material 1. LED life depends on the operating environment. 2. Dual lens type. IP54 End cover, conduit: polyamide, Cover: polycarbonate, Cable: PVC, Mounting bracket: stainless steel Illuminance Distribution Charts No-lens Condensing Lens Dual Lens (%) X: long side Y: short side Y (short side) image Y (short side) image Y (short side) image Illuminance Charts No-lens (LF1E-E3S-2N) Y (mm) X (mm) Y (mm) Condensing Lens (LF1E-E3S-2NA) X (mm) Y (mm) Dual Lens (LF1E-E3S-2NB) X (mm) IDEC (4332) USA & Canada 19

20 LF1E LED Lighting Dimensions (mm) LF1E Illumination Unit Conduit Cable Cable length: 3 Brown: L (+) L Cover End Cover Mounting Bracket (supplied) (LF9Z-1SE1) 1.7 ø4.2 Thickness =.4 14 Blue: N () ø5.9 Partially-stripped ( 2) 18 AWG Mounting Screw (supplied) ø8 1.2 max. When using mounting bracket (35) B Recommended mounting centers (D) C A L 4 max. Mounting Bracket (supplied) 2 max. M4 screw (supplied) 36 M4 P.7 Dimension Table Model L A B C D No. of Mounting Brackets LF1E-A LF1E-B LF1E-C LF1E-D LF1E-E Mounting Hole Layout Minimum Radius 24 mm Anti-rotation Hole (Use one) 6 6 ø2.1 M4 P.7 tapped hole or ø4.2 hole 2

21 LED Lighting EF1A EF1A Series Hazardous locations: Oil & Gas, Water Treatment, Chemical Plants, Painting Booths Key features: Hazardous location LED flood lights (Class I, Zone 1 and Zone 2) Heavy-duty aluminum housing with reinforced glass lens Narrow-angle and wide-angle beam models available Clear or translucent lenses Available with adjustable, fixed angle or no mounting bracket Four conduit sizes available Type 4X (IP67) without switch Type 3S (IP65) with switch Certifications and Compliances NEC and CEC IEC and ATEX (94/9/EC) Cl. I, Zone 1, Groups IIB, IIA Zones 1 & 21 and 2 & 22 UL: Class I, Zone 1, AEx d IIB T4 Gb ATEX: II 2G Ex d IIB T4 Gb II 2D Ex tb IIIC T 13 C Db IP67 (or IP65) cul: Ex d IIB T4 Gb X IECEx: Ex d IIB T4 Gb Ex tb IIIC T 13 C Db IP67 (or IP65) Certificate/file number: UL/cUL E35324 Certificate numbers: DEMKO 14 ATEX X IECEx UL 14.48X Part Numbers out pushbutton switch - Type 4X (IP67) Rated Voltage Optical Dispersion Mounting Bracket Lens Type Conduit Entry Termination Type Conduit Size (Male connection thread) m Part No. out (4-M6 screw on the back of EF1A) EF1A-12 W -m Narrow (Fixed angle) EF1A-12 W A-m 1 to 24V AC (Adjustable angle) out (4-M6 screw on the back of EF1A) EF1A-12 W B-m EF1A-12 W1 -m Wide (Fixed angle) EF1A-12 W1 A-m (Adjustable angle) out (4-M6 screw on the back of EF1A) Blank: Clear glass 1: Diffused glass Blank: One Side T: Both Sides Blank: Spring Clamp Terminal S: Screw Terminal C: Lead Wire N1: 1/2 NPT N2: 3/4 NPT M25: M25 (P1.5) M32: M32 (P1.5) EF1A-12 W1 B-m EF1A-11 W -m Narrow (Fixed angle) EF1A-11 W A-m 24V DC (Adjustable angle) out (4-M6 screw on the back of EF1A) EF1A-11 W B-m EF1A-11 W1 -m Wide (Fixed angle) EF1A-11 W1 A-m (Adjustable angle) EF1A-11 W1 B-m IDEC (4332) USA & Canada 21

22 EF1A LED Lighting pushbutton - Type 3S (IP65) Rated Voltage Optical Dispersion Mounting Bracket Lens Type Conduit Entry Termination Type Conduit Size (Male connection thread) m Part No. out (4-M6 screw on the back of EF1A) EF1A-12 WPl-m-A2 Narrow (Fixed angle) EF1A-12 WPlA-m-A2 1 to 24V AC (Adjustable angle) out (4-M6 screw on the back of EF1A) EF1A-12 WPlB-m-A2 EF1A-12 W1Pl-m-A2 Wide (Fixed angle) EF1A-12 W1PlA-m-A2 (Adjustable angle) out (4-M6 screw on the back of EF1A) Blank: Clear glass 1: Diffused glass P: One Side (Another Side Switch) * Blank: Spring Clamp Terminal S: Screw Terminal C: Lead Wire N1: 1/2 NPT N2: 3/4 NPT M25: M25 (P1.5) M32: M32 (P1.5) EF1A-12 W1PlB-m-A2 EF1A-11 WPl-m-A2 Narrow (Fixed angle) EF1A-11 WPlA-m-A2 24V DC (Adjustable angle) out (4-M6 screw on the back of EF1A) EF1A-11 WPlB-m-A2 EF1A-11 W1Pl-m-A2 Wide (Fixed angle) EF1A-11 W1PlA-m-A2 (Adjustable angle) EF1A-11 W1PlB-m-A2 * End of Part No. is marking A2 (pushbutton switch) Part Number Structure (use for interpreting part numbers only) Voltage 1: 24V DC 2: 1 to 24V AC Lens Type Blank: Clear glass 1: Diffused glass Optical Dispersion Blank: Narrow 1: Wide EF1A W 1 P S A N2 A2 Conduit Size (Male connection thread) N1: 1/2 NPT N2: 3/4 NPT M25: M25 (P1.5) M32: M32 (P1.5) Termination Type Spring clamp terminal Conduit / Switch Conduit Blank: Conduit on the one side T: Conduit on both sides P: Conduit on the one side Switch out out Termination Type Blank: Spring clamp terminal S: Screw terminal C: Lead wiring Pushbutton Switch A2: Extended (Maintained) Mounting Bracket Blank: out A: fixed angle mounting bracket B: adjustable angle mounting bracket Screw terminal Lead wiring 22

23 LED Lighting EF1A General Specifications Model EF1A -11 EF1A -12 Rated Voltage 24V DC 1 to 24V AC Voltage Range 21.6 to 26.4V DC 9 to 264V AC Rated Power (typ.) 17W (at rated voltage) 19W (at rated voltage) Dielectric Strength 5V AC 1 minute input - FG 2V AC 1 minute input - FG Insulation Resistance Vibration Resistance (damage limits) 1MΩ minimum (5V DC megger) input - FG Frequency 5 to 55Hz, amplitude.5mm Shock Resistance (damage limits) /s 2 Operating Temperature Operating Humidity Storage Temperature -2 to +5ºC (no freezing) 45 to 85% RH (no condensation) -35 to +7ºC (no freezing) Life Over 5, hours (The illumination duration in which the brightness maintains a minimum of 7% of initial value at 25ºC) Material Weight (approx.) Housing: aluminum, front panel: stainless steel, mounting bracket: stainless steel Lens surface: reinforced glass 2.9Kg (without mounting bracket), 3.1Kg (with mounting bracket) LED Optical Specifications Lens Type Clear Diffused Collecting Lens (Optical Dispersion) out out Number of LEDs 16 Color Temperature (typ.) 57K (Cool White) Total Luminous Flux (typ.) 96lm Reference Illuminance (typ.) At 1.m directory below 11lx 45lx 25lx 175lx Optical Dispersion (cd/1lm) Narrow Wide Clear glass Diffused glass Clear glass Diffused glass A A-A B-B C-C C B C A B Illuminance Distribution (at 1.m) Narrow (lx) Wide (lx) Clear glass Diffused glass Clear glass Diffused glass m 3m m 3m m 1 3m m 3m IDEC (4332) USA & Canada 23

24 EF1A LED Lighting Dimensions (mm) 1) Direct mounting Lens Optical Axis 3 2) fixed mounting bracket Lens Optical Axis 3 Mounting Bracket M4 Grounding Terminal M4 Grounding Terminal M6 Effective Thread: 9mm 3 Conduit entry or End cover Optional integrated switch to turn the LED on and off 4-φ ±.3 15 ±.4 2) mounting bracket/angle adjustable bracket 4-φ8.2 7 ± M4 Grounding Terminal M4 Grounding Terminal ) angle adjustable bracket (4) Dimension of conduit entry and ON/OFF switch and end cover Lens Optical Axis Mounting Bracket C Conduit entry size N1 N2 M25 M32 Conduit Entry Cover C 1/2 " NPT 3/4 " NPT P1.5 M25 P1.5 M32 End Cover M4 grounding terminal M4 grounding terminal ON/OFF Switch (5) Mounting hole layout 1) Direct mounting 289 ±4 (6) Attachments Instruction Manual...1 Hexagon Wrench (3)...1 (only with bracket) Hexagon Wrench (5)...1 angle adjustable bracket 24

25 LED Lighting LF1F Key features LF1F Unlike fluorescent lights, LED lights do not flicker and therefore illuminate objects evenly. Uneven surfaces, such as scratches and flaws, are more visible providing more accurate inspections. The LF1F provides steady light regardless of ambient temperature and the narrow profile saves space allowing mounting flexibility. Energy saving Long operating life Maintenance free 12mm-thin bezel saves space 3mm square illuminated surface Wider operating temperature range than fluorescent lighting LF1F Series Visual Inspection Lighting Elevator Ceiling Lighting Part Numbers Appearance Model Cable Length Size Color Temperature LF1F-B4-2D1 LF1F-B4-2D3 3m 3mm square 8,5K Applications Ideal for visual inspection, as the LF1F makes it easy to see even the slightest surface flaws. Specifications LED Optical Specifications Model LF1F Color Temperature 8,5K Reference Illuminance at 1.m Operating Specifications Model Operating Voltage Range Wattage (typ.) Insulation Resistance Dielectric Strength Vibration Resistance 5,8lx minimum (panel center) LF1F 21.6 ~ 26.4V DC 11W 1MΩ minimum 1,V, 5/6Hz, 1 minute 5 ~ 55Hz, amplitude.5mm, 6m/s 2 (3 directions, 2 hours each) Shock Resistance 1,m/s 2 Operating Temperature -1 ~ 6 (no freezing) Operating Humidity 45 ~ 85% RH (no condensation) Storage Temperature -2 ~ 7ºC (no freezing) Operating Environment No corrosive gases, no harmful dust Life 1 4, hours Degree of Protection IP2 (IEC6529) Housing: Aluminum Materials Light emitting part: acrylic; Cover: acrylic Weight (approx.) 1.1kg 1. LED life depends upon operating environment. Application examples for product inspections Detect uneven plastic and rubber part surfaces Detect dust on glass or plastic plates Illuminate marks on metal surfaces during cutting and marking Detect flaws on painted or plated surfaces Detect scratches and unevenness on embossed materials Detect scratches and foreign materials on silicon wafers Elevator illumination Dimensions (mm) / Light emitting plane Housing 12 m or 3mm 21 Light emitting plane: 271 x IDEC (4332) USA & Canada 25

26 Safety Precautions LED Lighting Safety Precautions To avoid electric shock, fire, or malfunction do not disassemble, repair, or modify the unit. Turn power off before wiring. To prevent electric shock or damage, ensure wiring is correct. Do not stare directly into the LF1B-N unit while it is lit, and do not project the light towards other people, as their eyes may be injured. The LF1B-N is a general-purpose industrial electric device. Do not use with electronic equipment which may cause harm or injury to anyone in case a malfunction or failure occurs. Please adhere to the operating temperature specification. A rise in internal temperature may damage the product. Instructions LED modules may vary slightly in color and brightness. Before designing equipment and powering up units, confirm the specifications described in the instruction sheet. Apply voltage within the rated values, otherwise the LED elements may be damaged. The unit is vulnerable to static electricity. Take sufficient measures for protection against static electricity and voltage surges. Make sure that the unit is not dropped during transportation, installation, and operation, otherwise damage may result. Do not pull or push the cable, otherwise damage may result. Allow sufficient slack to the cable while wiring. Do not apply excessive force. Do not leave a damaged unit unattended or use a damaged unit. Ensure the correct operating temperature, as rise in internal temperature may result in damage to the unit. Do not use or store in a location subject to vibration and shock. Do not use in the following locations: - Exposure to direct sunlight, near heaters, high temperatures - Subject to chemicals, and corrosive gases - Cold storage warehouses (make sure that no freezing occurs) - Places with high humidity such as basements and greenhouses Do not loosen screws, otherwise, the protection characteristics will be impaired. To clean the cover use a soft cloth with water or neutral detergent. Do not use solvents such as thinners, benzene, or alkaline, otherwise discoloration, deterioration, or decrease in strength may occur. The edge of the cable sheath is not waterproof. Moisture may be drawn in to the unit if water splashes directly onto the cable sheath. 26