E2Q6. Rectangular Proximity Sensor. Freely Change the Sensing Direction. Ordering Information. Sensors [Refer to Dimensions on page 6] DC Models
|
|
- Wilfred Lynch
- 6 years ago
- Views:
Transcription
1 Rectangular Freely Change the Sensing Direction Change between any of five sensing directions: front or 9 up, down, left, or right. Four indicators show the operating status of the from many directions. Refer to Safety Precautions on page 4. For the most recent information on models that have been certified for safety standards, refer to your OMR website. Ordering Information s [Refer to Dimensions on page 6] DC Models Shielded/ Unshielded Sensing distance Connection method Operation mode NPN output Model PNP output Shielded mm -NE3-H -NF3-H Unshielded mm Terminal block -NME3-H -NMF3-H Accessories (Sold Separately) Recommended Cable Gland (ST Type) (Manufactured by LAPP) Purchase a cable gland to maintain a water-resistant structure. Product number Color Screw size Applicable cable outer diameter ST-M 1. Black M P1. 7 to 13 dia. Dimensions (Unit: mm) For details or to make purchases, contact your OMR sales representative Note: A seal packing is not included. Applicable seal packing GPM Note: Purchase a seal packing to maintain water resistance. 1
2 Ratings and Specifications Shielding Shielded Unshielded Item Model -N 3-H -NM 3-H Sensing distance mm % mm % Set distance to 16 mm to 24 mm Differential travel Detectable object 1% max. of sensing distance Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data (Reference Value) on page 3.) Standard sensing object Iron, mm Iron, mm Response frequency *1 Hz Hz Power supply voltage (operating voltage range) Current consumption Control current output Residual voltage Indicators Operation mode Protection circuits Ambient temperature range Ambient humidity range Temperature influence Voltage influence Insulation resistance Dielectric strength Vibration resistance (destruction) Shock resistance (destruction) to VDC, including % ripple (p-p) ma max. ma max. 2 V max. (at ma load current) Power indicator (green), detection indicator (yellow) Degree of protection IEC IP67 *2 Connection method Weight (packed state/ only) Materials Accessories Case Sensing surface Terminal base Power supply reverse polarity protection, output reverse polarity protection, and load short-circuit protection Operating and storage: 2 to 7 C (with no icing or condensation) Operating and storage: 3% to 9% (with no condensation) 1% max. of sensing distance at 23 C in the temperature range of 2 to 7 C 2% max. of sensing distance at 24 VDC in the range of 24 VDC 1% 2% max. of sensing distance at 12 VDC in the range of 12 VDC 1% M min. (at VDC) between current-carrying parts and case 1, VAC, at /6 Hz for 1 min. between current-carrying parts and case to Hz with a 1.-mm double amplitude in X, Y, and Z directions m/s 2 3 times each in six directions Terminal block Approx. g/approx. 2 g Polyamide (PA) Polyamide (PA) Polyamide (PA) Instruction manual *1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. *2. When the recommended cable gland is used. 2
3 X X Engineering Data (Reference Value) Sensing Area Shielded Models -N 3-H 3 2 Y Unshielded Models -NM 3-H 3 2 Y Sensing Head Distance Y (mm) Influence of Sensing Object Size and Materials Shielded Models Unshielded Models -N 3-H -NM 3-H 4 4 Sensing Head Distance Y (mm) 2 1 d t = 1 mm X Iron Stainless steel SUS4 3 2 d t = 1 mm X Iron Stainless steel SUS4 Brass 1 Brass Aluminum Aluminum Copper Copper Side length of sensing object: d (mm) Side length of sensing object: d (mm) I/O Circuit Diagrams NPN Model Operation mode Timing charts Output circuit -NE3-H -NME3-H Outside of sensing area Sensing object Sensing area (%) Rated sensing distance Lit Detection indicator Not lit (yellow) Control output, NO Control output, NC main circuit 1 +V 4 NO output 2 NC output 3 V Terminal arrangement Cable connecting side PNP Model Operation mode Timing charts Output circuit Outside of sensing area Sensing object Sensing area 1 +V -NF3-H -NMF3-H (%) Rated sensing distance Lit Detection indicator Not lit (yellow) Control output, NO Control output, NC main circuit NO output 4 NC output 2 3 V Terminal arrangement Cable connecting side 3
4 Safety Precautions Be sure to read the precautions for all models in the website at: http// Indication and Meaning for Safe Use WARNING Precautions for Safe Use Precautions for Correct Use Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury, or may result in serious injury or death. Additionally there may be significant property damage. Supplementary comments on what to do or avoid doing, to use the product safely. Supplementary comments on what to do or avoid doing, to prevent failure to operate, or undesirable effect on product performance. WARNING This product is not designed or rated for directly or indirectly ensuring safety of persons. Do not use it for such a purpose. Never use this product with an AC power supply. Otherwise, explosion may result. Precautions for Safe Use The following precautions must be observed to ensure safe operation. 1. Do not use the product in an environment where flammable or explosive gas is present. 2. Do not attempt to disassemble, repair, or modify the product. 3. Power Supply Voltage Do not use a voltage that exceeds the rated operating voltage range. Applying a voltage that is higher than the operating voltage range may result in damage or burnout. 4. Incorrect Wiring Be sure that the power supply polarity and other wiring is correct. Incorrect wiring may cause explosion or burnout.. Connection without a If the power supply is connected directly without a load, the internal elements may explode or burn. Be sure to insert a load when connecting the power supply. 6. Dispose of this product as industrial waste. UL Certification This product is certified for UL standards, but the certification is not applicable to metal piping to the conduit section. For UL applications, use a certified cable grip. Precautions for Correct Use Operating Environment 1. Do not install the product in the following locations. Doing so may result in product failure or malfunction. (1) Outdoor locations directly subject to sunlight, rain, snow, water droplets, or oil. (2) Locations subject to atmospheres with chemical vapors, in particular solvents and acids. (3) Locations subject to corrosive gases. (4) Locations subject to shocks or vibration. 2. The may malfunction if used near ultrasonic cleaning equipment, high-frequency equipment, transceivers, cellular phones, inverters, or other devices that generate a highfrequency electric field. Please refer to the Precautions for Correct Use of Photoelectric s on the OMR website ( for typical measures. 3. Laying the wiring in the same conduit or duct as high-voltage wires or power lines may result in incorrect operation and damage due to induction. Wire the using a separate conduit or independent conduit. 4. Cleaning Never use thinner or other solvents. Otherwise, the product surface may be dissolved.. Do not subject the to strong shock. Otherwise, the Head may be damaged. Power The is ready to sense an object within ms after turning the power. If the load and are connected to different power supplies, always turn the power first. Power Output pulses may occur when the power supply is turned. Turn the power supply to the load or load line first. Effects of Surrounding Metals When the is embedded in metal, make sure that the clearances given in the following table are maintained. B A B C F E D E (Unit: mm) Model A B C D E F -N 3-H 6 -NM 3-H
5 Mutual Interference If more than one is installed face-to-face or side-byside, make sure that the distances between two units adjacent to each other are the same as or larger than the corresponding values shown in the following table. Switching the Sensing Direction 1. Remove two screws. A B 2. Lifting the sensing surface separates it from the case. A (Unit: mm) (2) Model A B -N 3-H NM 3-H 28 Tightening Torque Tighten bolts and screws with the specified torque. Between case and terminal Terminal screws 1.8 N m 1. N m 3. When positioning the sensing surface to the side, rotate it to the required position, then fit it into the case. (The possible positions are, 9, 18, and 27. Do not forcefully rotate the sensing surface.) (1) 4. Secure it with the screws.
6 Dimensions (Unit: mm) Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified. s -NE3-H -NF3-H -NME3-H -NMF3-H Power indicator (green) Two,.3-dia. holes Two, 7.3 Two,.3 4 Detection indicator (yellow) Front Detection Conduit screw, M P Detection indicator (yellow) 4 Power indicator (green) Mounting Hole Dimensions Four,.-dia. (or M) holes ±.2 6±.2 Cat. No. F17E-EN-1 In the interest of product improvement, specifications are subject to change without notice. OMR EUROPE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands Phone: Fax: industrial.omron.eu
A Metal Head That's. Highly Durable and Provides Long-distance Detection. mm 7(M18 Model) Proximity Sensor with All-stainless Housing E2EF NEW
NEW Proximity Sensor with All-stainless Housing EEF Standard Model (Completely stainless- housing) A Metal Head That's * Highly Durable and Provides Long-distance Detection mm 7(M18 Model) *More than 0
More informationTL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information
Flat Inductive Standard Flat s in Many Different Variations Only 6 mm thick yet provides a sensing distance of mm (MC1). Aluminum die-cast models also available. Be sure to read Safety Precautions on page
More informationE2EZ-X2D1-N E2EZ-X2D2-N
Chip-immune Inductive s Detects Objects without Being Influenced by Aluminum or Iron Chips Series now includes M s. s also available. CE Marking for DC -Wire and DC -Wire s. Be sure to read Safety Precautions
More informationInductive Proximity Sensor E2Q2. Ordering Information. Limit Switch Style Proximity Sensor with 5-Position Sensing Head
R Inductive Proximity Sensor Limit Switch Style Proximity Sensor with 5-Position Sensing Head H Sensing face easily adjusts to one of five directions H Easy to install and same mounting dimensions as a
More informationInductive Proximity Sensor
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Inductive Proximity Sensor E2Q3 Square
More informationInductive Proximity Sensor
Inductive Proximity Sensor General-purpose Type in a Basic Switch Housing Mounting pitch compatible with that of mechanical basic switch. Wide operating voltage range: 10 to 30 VDC or 90 to 250 VAC. LED
More informationInductive Proximity Sensor
Inductive Proximity Sensor E2Q3 Square Proximity Sensor Terminal housing Integrated short circuit and reverse polarity protection Output function programmable by wiring Active face positioning: Y-axis
More information2.5 mm. (0.10 in) E2S -Q25 E2S -Q26. Output configuration. 2.5 mm. End face E2S -W15 E2S -W16 End face PNP
Subminiature Rectangular Inductive Prox World s Smallest Square Sensor with Built-in Amplifier H. x. mm type allows smaller, space-saving machines and devices H High response frequency ( khz) for fast
More informationE2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models
Long-barrel Inductive Proximity Sensor E2E2 Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility. A milled
More information2.5mm. Output configuration NPN. 2.5mm PNP. 2.5mm
Compact Square Inductive Proximity Sensor World s Smallest Square Sensor with uilt -in Amplifier 5.5 x 5.5 mm type contributes to smaller, space-- saving machines and devices. Comprehensive range; sensing
More informationE2E/E2EQ NEXT Series. Proximity Sensor. Long-distance Detection Prevents Unexpected Facility Stoppages. E2E/E2EQ NEXT Series Model Number Legend
Proximity Sensor Long-distance Detection Prevents Unexpected Facility Stoppages The world's longest sensing distance* Nearly double the sensing distance of previous With high-brightness LED, the indicator
More informationE2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models
Long-barrel Inductive Proximity Sensor EE CSM_EE_DS_E Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility.
More informationInductive Proximity Sensor
Inductive Proximity Sensor Square Proximity Sensor Terminal housing Active face changeable to one of every five Easy to install and same mounting dimensions as a standard style electromechanical limit
More informationE2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models
Long-barrel Inductive Proximity Sensor EE CSM_EE_DS_E Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility.
More informationInductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor Ideal for Narrow Mounting Space Grooved TL-G3D is ideal for high-speed pulse generator and high-speed revolution control. TL-Q2 and TL-Q5 save mounting space
More informationBasic Switch Style Inductive Prox TL-M. Ordering Information. General-purpose Inductive Prox in a Basic Switch Housing
R Basic Switch Style Inductive Prox General-purpose Inductive Prox in a Basic Switch Housing H Mounting pitch compatible with that of a mechanical basic switch H Wide operating voltage range: 10 to 30
More informationTL-N7MD1 7mm(0.28 in) NC. 12 mm (0.47 in)
R Rectangular Inductive Prox Space-Saving Sensors for a Wide Range of Applications H Switches loads up to 200 ma H Easy to install DC 2-wire models reduce wiring H DC 3-wire models available with high-flexibility
More informationProximity Sensor. Shield Size Sensing distance Output configuration Models Shielded M12 3 mm NO E2EQ-X3D1 E2EQ-X7D1 M30 10 mm E2EQ-X10D1
Proximity Sensor A Series of Spatter-preventing Proximity Sensors with a Teflon-coated Metal Housing Teflon*-coated metal housing endures high tightening torque. Pre-wired and plug-in models are available.
More informationCylindrical Proximity Sensor
Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition
More informationFeatures. 2-wire type available. Max. operation distance: 1.5 mm 0.06 in (Stable sensing range 0 to 1.2 mm 0.05 in)
817 Cylindrical Inductive Proximity Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms...p.1576~ guide... P.781~ General precautions... P.1579~ PHOTO PHOTO panasonic.net/id/pidsx/global
More informationSupply voltage 12 to 24 VDC (10 to 30 VDC), ripple (p-p) 10% max. 100 to 220 VAC (90 to 250 VAC), 50/60 Hz
R Pancake Style Inductive Prox Long-Range Proximity Sensor Detects Metal Objects at 50 mm H Ideal for many industrial automation applications H Choose DC 3 -wire or AC 2 -wire models H Rugged die -cast
More informationOrdering Information. Long Barrel Inductive Prox E2E2 2-WIRE AC. Rugged Inductive Prox Sensors Meet IP67 Requirements
R Long Barrel Inductive Prox Rugged Inductive Prox Sensors Meet IP67 Requirements H Solid potted internal circuitry withstands shocks and water washdown to IP67 H Thick nickel-plated brass barrel has wrench
More informationCorrection Reissue. Product Discontinuation Notices. Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.
PRODUCT NEWS Correction Reissue Product Discontinuation Notices Proximity Sensors Issue Date August 4, 2014 No. 2014038CE(3) Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.
More informationModel Pressure range ON/OFF output Linear output
Digital Sensor Sensor with Easy-to-Read LED Display status can be checked at a glance from the red digital pressure value and analog bar displays. Measurement pressure is averaged by the chattering prevention
More informationTransistor Remote Modules
Transistor Remote Modules Compact 8-point and 16-point Transistorized Modules Compact (8-point models: 125 x 40 x 50 mm (W x H x D); 16-point models: 150 x 40 x 50 mm (W x H x D)) Two independent supplies
More informationInductive Proximity Sensor
Inductive Proximity Sensor ASH & ALAIN INDIA PVT LTD S100, F.I.E.E., Okhla Industrial Area, Phaseii, New Delhi110020(India) Tel : 01143797575 Fax : 01143797574 Email : sales@ashalain.com E2Q4 Square Proximity
More informationOrdering Information. Long Barrel Inductive Prox E2E2 2-WIRE AC. Rugged Inductive Prox Sensors Meet IP67 Requirements
R Long Barrel Inductive Prox Rugged Inductive Prox Sensors Meet IP67 Requirements H Solid potted internal circuitry withstands shocks and water washdown to IP67 H Thick nickel-plated brass barrel has wrench
More informationOrdering Information. Long Barrel Inductive Prox. E2E2 2-Wire DC. Reduce Wiring to Control Devices with 2-Wire Inductive Prox Sensors
R Long Barrel Inductive Prox E2E2 2-Wire DC Reduce Wiring to Control Devices with 2-Wire Inductive Prox Sensors H Thick nickel-plated brass barrel for ruggedness H Solid potted internal circuitry withstands
More informationE2K-L. Liquid Level Sensor. Applications. Ordering Information
Liquid Level Sensor Installation on pipes. Sensing by means electrostatic capacity and is not influenced by the color of the pipe or liquid. Available in 8 to mm dia. and to mm dia. models to enable sensing
More informationInductive Proximity Sensor
Inductive Proximity Sensor Square Proximity Sensor Limit switch styled housing models easy to install. Standard CENELEC models and miniature types. Terminal housing, M12 Plug--in connection and cable types.
More informationSensing & Safety GENERAL CATALOGUE 2004/2005
GENERAL CATALOGUE 00/005 Sensing & Safety Photoelectric Sensors Displacement Sensors Vision Systems Safety Sensors Safety Switches Safety Relays Proximity Sensors Rotary Encoders Pressure Sensors Advanced
More informationCylindrical Inductive Proximity Sensor GX-M SERIES
Cylindrical Inductive Proximity Sensor GX-M SERIES Listing (2 m cable length type only) Features Wide product range Types: DC 3-wire shielded type DC 3-wire non-shielded type DC 2-wire standard type DC
More informationDigital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CB/ CSM_E8CB DS_E 1 with Built-in Microcomputer and Digital Display Withstands a of 9 kpa and highly reliable. Incorporates a two-turn adjuster ensuring easy setting. Be
More informationAnti-spatter Inductive Prox E2EQ. Ordering Information. Weld-Sputter Resistant DC 2-Wire Cylindrical Sensors. H Rugged fluoroplastic coated brass
R Anti-spatter Inductive Prox Weld-Sputter Resistant DC 2-Wire Cylindrical Sensors H Rugged fluoroplastic coated brass barrel withstands high tightening torque H Fluoroplastic resin face prevents weld
More informationProximity Sensors E-1. Standard E2E/E2EG E-2 Antispatter E2EQ E-32 Chemical Resistance E2FQ E-40. Cylindrical
Proximity Sensors Cylindrical Standard EE/EEG E- Antispatter EEQ E- Chemical Resistance EFQ E-0 Rectangular Subminiature ES E- Flat TL-W E-5 Standard TL-N E-60 Capacitive Liquid Level EK-L E-68 Long Distance
More informationCylindrical Sensors CY-100 SERIES panasonic-electric-works.net/sunx. Cylindrical Inductive Proximity Sensor GX-M SERIES.
Cylindrical Sensors Photoelectric Sensor CY-100 SERIES Inductive Proximity Sensor GX-M SERIES Listing (2 m cable length type only) Cylindrical Inductive Proximity Sensor GX-M SERIES Cylindrical Photoelectric
More informationModel Pressure range ON/OFF output Linear output
Authorised Distributors:- ASH & ALAIN INDIA PV LD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-112(India) el : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com Digital Sensor Sensor
More informationModel Number Structure
Conductive Level Controller CSM DS_E_1_1 Ideal for level control for industrial facilities and equipment. Outputs can be set to self-hold at or using self-holding circuits. Sensitivity adjustment of operating
More informationCylindrical type proximity sensor
Cylindrical type Cylindrical type proximity Features Improved the noise resistance with dedicated IC Built-in reverse polarity protection circuit (DC 3-wire type) Built-in surge protection circuit Built-in
More informationF3S-TGR-KM15/-KM16/-KH16
Safety door switches with partially or full stainless steel body F3S-TGR-KM1/-KM16/-KH16 This safety door switches use a stainless steel head or even a full stainless steel body to increase the robustness.
More informationF3S-TGR-KHL1/-KHL3/-KHL3R
Safety guard-lock door switches with full stainless steel body F3S-TGR-KHL1/-KHL3/-KHL3R The F3S-TGR-KHL3 safety-door switch keeps medium to large guard doors closed until hazards have been removed. It
More informationDifferential Pressure Sensor
Differential Pressure Sensor "Cube" Type Differential Pressure Sensor with LED Display Offers High Precision Sensing 31 (1.) x 3 (1.18) x 3 (1.18) mm compact-cube style saves mounting space Easy-to-read
More information* E8MS-N1 is only 1-channel pressure sensor controller. E80-C2 can be used. For more details, please refer to E80 catalogue.
Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-(India) Tel : -7977 Fax : -7977 E-mail : sales@ashalain.com Sensor Four-Input-Channel Sensor
More informationInsulation method Zero-cross function Indicators Applicable output load Model number Phototriac coupler Yes Yes (See page 6) Main Circuit
SSR with Failure Detection Function Detects failures in SSRs used for heater temperature control and simultaneously outputs alarm signals. This product supports the safe design of heater control systems,
More information(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
More informationE2EM-X4X1 2M * E2EM-X4X2 2M Shielded E2EM-X8X1 2M * E2EM-X8X2 2M. M30 15 mm E2EM-X15C1 2M E2EM-X15C2 2M. M18 16 mm E2EM-X16MX1 2M E2EM-X16MX2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E_6_ Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for
More informationDescription General-purpose models Timer-function models Output NPN PNP NPN PNP Part number E3X-NH11 E3X-NH41 E3X-NH21 E3X-NH51 Appearance
R High-Precision Fiber-optic Amplifier TheEmploysa16-Bit Processor as An Industry First H An Automatic Sensitivity Adjustment feature allows stable detection of objects in frequently changing environments
More information0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h)
Mechatronic Analog Timer H3AM Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty and
More informationA4EG. Enabling Grip Switch. Enabling Grip Switch with Distinct Feel for Three Easily Discernible Positions. Ordering Information
Enabling Grip Switch Enabling Grip Switch with Distinct Feel for Three Easily Discernible Positions The difficult task of configuring safety circuits is now easily achieved by combining the with the G9SX-GS.
More informationDigital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CC with Built-in Microcomputer and Digital Display Withstands a pressure of 49 kpa and highly reliable. Incorporates a two-turn pressure adjuster ensuring easy pressure setting.
More informationPCB Relay. Contact form Terminals Coil terminals Rated voltage Model SPST-NO #250 tab terminals PCB terminals 5, 12, 24 VDC G4A-1A
PCB Relay Miniature Single-pole Relay with 80-A Surge Current and 20-A Switching Current Ideal for motor switching. Miniature, relay with high switching capacity built-in applications. Creepage distance
More informationAnalog Output Terminal
Analog Output Terminal I/O Interface Converts Binary Data into Analog Output Data Two outputs available. High resolution of 1/6000. Conversion is possible within a range of 5% to 105% FS. High conversion
More informationAnalog Input Terminal
Analog Input Terminal I/O Interface Converts Analog Input Data into Binary Data Four inputs available. High resolution of 1/6000. Conversion is possible within a range of 5% to 105% FS. High conversion
More information20 amps 220 amps, 60 Hz VDC VAC G3PA-420B-VD-2 DC amps 440 amps, 60 Hz G3PA-450B-VD-2 DC12-24
Solid State Relays (SSRs) G3PA/G3PB Long Service Life for Circuits that Cycle Frequently D D D D D Built-in heat sink increases life and reliability Voltage turn-on at zero crossing reduces initial inrush
More informationE3ZM-C. Photoelectric Sensor for the Automotive and Machine Tool Industries. Features
Authorised Distributors:Intech Systems Chennai Pvt. Ltd, Chennai-6 Ph: +9 8888 Fax: 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Oil-resistant, Robust, Compact Photoelectric Sensor
More informationGX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.
DC 2-wire Cylindrical Inductive Proximity SERIES High performance & ease of use Amplifier Built-in Robust in tightening The tightening torque has been improved to approx. four times greater than that of
More informationCylindrical photoelectric sensors in M18 plastic or brass housings. Performance and portfolio variety. Metal *1 90 Optics AC power supply *2
Cylindrical photoelectric sensors in M8 plastic or brass housings Complete sensor portfolio in plastic and metal housing IP67, IP69K for highest water resistance High immunity against electro-magnetic
More informationDC 2-Wire Unshielded Cylindrical Proximity Sensors. Operation mode. Setting indicator N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. 20mm N.O. N.O. N.O.
DC 2-Wire Unshielded Cylindrical Proximity Sensors FL7MSeries Unshielded sensors achieve especially long sensing distances Long sensing distance (2 times the sensing distance of a regular FL7M) DC 2-wire
More informationSmall Limit Switch D4V
Small Limit Switch DV Compact Vertical Models Sized for Asian Standards Compact new design approximately / the size of OMRON vertical Limit Switches. Structure enables the terminal section to be fully
More informationDC2-Wire Unshielded Cylindrical Proximity Switches
DC2-Wire Unshielded Cylindrical Proximity Switches FL7M Series Unshielded switches achieve especially long sensing distances Long sensing distance (2 times the sensing distance of a regular FL7M) DC2-wire
More informationSmall-diameter Proximity Sensor
Small-diameter Proximity Sensor EE Ultra small size, but surprisingly easy installation! With the addition of M, 5.-dia.,.5-dia. size, unshielded, pre-wired connector model, and connector model, a total
More informationInductive Proximity Sensor
Inductive Proximity Sensor Variable Distance and Differential Travel Allow a Wide Range of Applications Various Heads available in outer diametersfrom2.0to40mm. and stability indicators (LED) in Amplifier
More informationSG-B1 SERIES / SG-A1 SERIES
643 Door with Solenoid Interlock / Door Ultra-slim SG-B1 SERIES / SG-A1 SERIES Related Information General terms and conditions... F-7 General precautions... P.1501 PHOTO PHOTO Conforming to Machine &
More informationInput terminals Isolation method Zero cross function Operation indicator Alarm output Applicable load (See note.) Model
Solid State Relays with Built-in Current Transformer CSM DS_E_7_ A New-concept SSR with Built-in Current Transformer. Heater Burnout and SSR Shortcircuit Failure Detection. Built-in Current Transformer
More informationD4DL. Guard Lock Safety-door Switch. Model Number Structure
Guard Lock Safety-door Switch Two new types added to series: Mechanical-lock models that lock automatically when the Operation Key is inserted, and solenoid-lock models that lock when voltage is applied
More informationVarious applications. Robust housing. The GX-4S uses a robust stainless steel housing. The tightening torque can be 0.58 N m or less.
INUCTIVE SERIES Compact Inductive Proximity Sensor Flexible cable Metal embedding type available possible Amplifier Built-in High functionality together with robust housing and flexible cable GA-/GH -N
More informationSensing distance. 4mm. 4mm. 7mm. 12mm. 20mm
DC2-wire Square Proximity Sensors FL2R/SSeries This DC2-wire Square Proximity sensor Can Be Directly Connected to Programmable Controllers and Units. Wide Range of Models Available. Reduced wiring costs
More informationModel Number Structure
Solid State Relays (Single-phase) G3PB New Single-phase Solid State Relays with Compact Size for Heater Control Slim models with a thickness of only 22.5 mm are also available. Compact design achieved
More informationPCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load G6C - - VDC
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
More informationApplicable output load (See note 2.) Photocoupler Yes Yes 40 A at 110 to 220 VAC 5 to 24 VDC G3NB-240B 5 to 24 VDC G3NB-240B-UTU 5 to 24 VDC
Solid State Relays G3NB with 40-A output at a reasonable price. Switches 9 A without a heat sink. Zero cross function enables less noise operation. Built-in varistor effectively absorbs external surges.
More informationHigh-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.
Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available
More informationRectangular-shaped Inductive Proximity Sensor.
69 PHOTO PHOTO Rectangular-shaped Inductive Proximity Sensor -F/H SERIES Related Information Amplifi er General terms and conditions... P.1 Sensor selection guide...p.11~ / P.67~ Glossary of terms... P.19
More informationModel Number Structure
Terminal Relay G6B-4@@ND Compact Terminal Relay with 4 Independent Outputs Equipped with four G6B Mini-relays that are compact, highly sensitive, and highly resistant to dielectric surges, and that can
More informationSolid State Relays G3RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. SSR and Socket Combinations
Solid State Relays G3RV Slimmest OMRON plug-in SSR with maximum width 6.2 mm Long electrical life and high speed switching Large plug-in terminals for reliable connection G3RV-D (DC load) models can manage
More informationPCB Relay. Ordering Information. Surface Mounting DPDT Relay G6S
PCB Relay Surface Mounting DPDT Relay Long terminals for ideal for soldering and mounting reliability. Space-saving inside-l terminal. High dielectric strength between coil and contacts (2,000 VAC), and
More informationDC2-Wire Aluminum-Chip Resistant Cylindrical Proximity Sensors N.O. N.C. N.O. N.C. N.O. N.C. 8mm N.O. N.C. N.O. N.O. N.C. N.O. N.O. N.C.
DC-Wire Aluminum-Chip Resistant Cylindrical Proximity Sensors FL7M-ASeries Detects workpieces reliably even if aluminum or cast iron chips accumulate on the sensing head. DC-wire proximity sensors can
More informationSwitching Power Supply
Switching Power Supply Miniature DIN-track Mounting DC-DC Power Supplies 3- and 7.5-W models. Inputs: 10 to 27 VDC (DC input) Outputs: 5, 12, 15, 24, ±12, and ±15 V. 65 mm depth enables mounting onto panels
More informationG6K. Surface Mounting Relay with the World s Smallest Mounting Area. Application Examples. Model Number Legend. Ordering Information
with the World s Smallest Mounting Area Subminiature model as small as.2 (H). (W) (L) mm is ideal for high-density mounting ((U)-2F(-Y)). Low profile of.2 mm improves mounting efficiency ((U)-2F(-Y)).
More informationAC/DC2-wire Type Cylindrical Proximity Switches
AC/DC2-wire Type Cylindrical Proximity Switches FL7M Series No-polarity 2-wire general-purpose switches are easy to use. 2-wire type for both AC and DC greatly reduces wiring man-hours Stable sensing area
More informationA4EG. Enabling Grip Switch. Enabling Grip Switch with Distinct Clicks for Three Easily Discernable Positions
Enabling Grip Switch Enabling Grip Switch with Distinct Clicks for Three Easily Discernable Positions -C000041 -BE2R041 Equipped with an Emergency Stop Switch -BM2B041 Equipped with a Momentary Operation
More informationNot affected by drops, bubbles or froth
PARTICULAR USE SENSORS SERIES Sensor Detects water...reliably! Strong penetration power Not affected by drops, bubbles or froth Conforming to EMC Directive UL Recognition (Excluding m cable length type)
More informationPCB Relay. Contact form Terminal Single-side stable Single-winding latching
PCB Relay Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98 mw pickup coil power. Impulse withstand voltage meets FCC Part 68 requirements. Plastic-sealed construction. Unique moving
More information2-Color Display Digital Pressure Switch. NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. Rated Pressure Metal Body Type
Series ISE70/75/75H New NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red
More informationOrdering Information. Switching Power Supply S82F. Industrial-Grade Power Supply for General or Peak Load Applications SWITCHING POWER SUPPLIES
Switching Power Supply S82F Industrial-Grade Power Supply for General or Peak Load Applications Correct input voltage range is automatically selected: 1 VAC or 2 VAC. Model S82F-P is suitable for peak
More informationSYSMAC Transistor Remote Module
9 SYSMAC Transistor Remote Module Block and Transmission Capability in One Module 1 Two-conductor cable communications available using Omron Wired Remote I/O Master Modules (C200H-RM201 and C500-RM201)
More informationApplicable Terminal Relay Rated voltage Model G6D-F4B 12 VDC G6D-1A (see note) 24 VDC 12 VDC G6D-1A-AP (see note) 24 VDC G3DZ-F4B 12 VDC G3DZ-2R6PL
Terminal Relay Easy-to-use, Space-saving Terminal Relay with Four-point Output Almost the same size as PYF Socket: 31 x 35 x 68 mm (W x H x D) Each terminal circuit (with coil or contact) is independent
More informationSafety Interlock Switches
Safety Interlock Switches ATK ATK Safety Key Selector Switch Key-type selector switch with direct opening mechanism Selector Switch for secure equipment activation during maintenance 0 types of exclusive
More information2-Color Display Digital Pressure Switch. Rated Pressure Metal Body Type (ISE75H) 2-color digital. Functions
Series ISE70/75/75H NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red Green
More information2 to 25 A, 100 to 240 VAC G3PF-225B-STB Compact slotted
Solid State Relays with Built-in Current Transformer CSM DS_E_7_ A New-concept SSR with Built-in Current Transformer. Heater Burnout and SSR Shortcircuit Failure Detection. Built-in Current Transformer
More informationTECHNICAL GUIDE FOR PROXIMITY SENSORS DEFINITIONS YAMATAKE PROXIMITY SENSOR CATEGORIES
TECHNICAL GUIDE FOR PROXIMITY SENSORS DEFINITIONS "" includes all sensors that detect the presence of a metallic object approaching the sensing face or near the sensing face without mechanical contact.
More informationD4DS. Compact Interlock Safety Door Switch. Compact Safety Switch Saves Space and is Ideal for a Variety of Doors. Refer to Precautions on page 9.
Compact Interlock Safety Door Switch Compact Safety Switch Saves Space and is Ideal for a Variety of Doors Positive opening mechanism and double insulation approved by TÜV and BIA. Five-direction Operation
More informationOrdering Information. General-purpose Basic Switch X. Direct Current Switch with Built-in Magnetic Blowout. Model Number Legend
General-purpose Basic Switch X Direct Current Switch with Built-in Magnetic Blowout Incorporates a small permanent magnet in the contact mechanism to deflect the arc to effectively extinguish it. Ideal
More informationOperation mode. Sensing distance N.O. N.C. N.O. N.C. N.O. N.C. 7mm
6 Specifications FL7N/M Series DC 2-wire Type (shielded/unshielded) Cylindrical Proximity Sensors FEATURES Rigid Structure, Highly Water-proof DC 2-wire Type with Improved Visibility Indicator Lamps. DC
More informationPCB Relay. 2. Contact Form 2: DPDT 3. Terminal Shape None: PCB terminal F: Surface mount terminal
PCB Relay Ultracompact, Ultrasensitive DPDT Relay Compact size and low 5-mm profile. Low power consumption (140 mw for single-side stable, 100 to 300 mw for latching type) and high sensitivity. Low thermoelectromotive
More informationFL7MSeries. DC2-Wire Regular Cylindrical Proximity Sensors
DC-Wire Regular Cylindrical Proximity Sensors FL7MSeries Rigid structure, highly waterproof DC -wire sensors with improved visibility of lamps. DC -wire, for reduced wiring costs. Stable sensing area is
More informationD4BS. Safety-door Switch. Model Number Structure. Switch D4BS - S Operation Key D4BS - K. Ordering Information
Safety-door Switch Safety-door Switch s Special Operation Key Directly Pulls Apart the Contacts from Each Other and Contributes to the Safety of the Production Site Conforms to EN (TÜV) standards corresponding
More informationHead-separated Digital Pressure Sensor DP5 SERIES DPH SERIES
76 ORDER GUIDE DP / configuration diagram Intermediate cable s Type Vacuum pressure Positive pressure Compound pressure Appearance An intermediate cable is required to connect the controller and the sensor
More informationpanasonic.net/id/pidsx/global Solve issues related to machine safety and other safety measures with a safety door switch with key!
655 Door with Key SERIES Related Information General terms and conditions... F-7 General precautions... P.50 PHOTO PHOTO Conforming to Machine & EMC Directives Recognition Certified MEASURE ITY panasonic.net/id/pidsx/global
More informationEnvironment-resistant Series. Oil-resistant Components. Let Us Help You. Eliminate Production Line Stoppages. No Cutting Oil Ingress by Any Path
Environment-resistant Series Oil-resistant Components Let Us Help You Eliminate Production Line Stoppages No Cutting Oil Ingress by Any Path Environment-resistant Series, Oil-resistant Components Unexpected
More informationHL (AZH) LIMIT SWITCHES
COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount
More information