HS1C Series Full Size Interlock Switch with Locking Solenoid. GS-ET-15 BG standard in Germany. HS1C Series Functionality
|
|
- Cameron Milton Burke
- 5 years ago
- Views:
Transcription
1 Full Size Interlock Switch with Locking Solenoid HSC Key features include: Rugged Aluminum Die-cast Housing With the actuator mounted on a movable door, and the switch on a machine, the door can be mechanically locked when closed. Greater Safety: The door is unlocked by a solenoid lock-release signal from a PLC or another source after the machine has stopped. In the event of power failure or for machine maintenance, the door can be unlocked using a special tool. Flexible Installation: The actuator can be accessed from two directions. Select from four different circuit configurations. IP7 Protection EN088 EN IEC ET GS-ET-5 BG standard in Germany Certificate No Direct Opening Action Functionality Conduit Port: G/ Contact Mechanism (Direct Opening Action) LED Indicator Tubular Clamp Terminal Block (M3) Straight Key (mainly for sliding doors) Two Key Entry Slots L-shaped Key (mainly for hinged doors) Adjustable Key (mainly for hinged doors) Manual Unlocking Entry (M opening) The manual unlocking function: Accessible using a small screwdriver after removing a TORX* screw on the unlocking entry Ground Terminal Terminal Block for the Indicator (M3.5) Key wrench for TORX* screws (included with the switch) TORX* screw *TORX is a registered trademark of Camcar Textron USA: (800) -IDEC or (08) , Canada: (888) 37-IDEC
2 Specifications Specifications Conforming to Standards EN088, IEC097-5-, EN GS-ET-9 Operating Temperature 0 to +0 C (no freezing) Storage Temperature 0 to +80 C Operating Humidity 85% RH maximum (no condensation) Altitude,000m maximum Rated Insulation Voltage (Ui) 300V (between LED or solenoid and ground: 0V) Impulse Withstand Voltage (Uimp) kv (between LED or solenoid and ground:.5 kv) Between live and dead metal parts: 00 MΩ minimum Insulation Resistance Between live metal part and ground: 00 MΩ minimum Between live metal parts: 00 MΩ minimum Between terminals of the same pole: 00 MΩ minimum Electric Shock Protection Class Pollution Degree Degree of Protection Vibration Resistance Operating Extremes Damage Limits Class (IEC0) 3 (IEC097-5-) IP7 (IEC059) 0 to 55 Hz, amplitude 0.5 mm 0 m/s (approx.g) Shock Resistance,000 m/s (approx. 00G) Key Tensile Strength when Locked Operating Speed Positive Opening Travel Positive Opening Force Thermal Current (Ith) Rated Operating Current (Ie) Contact Opening Distance Operating Frequency Mechanical Life Electrical Life Conditional Short-circuit Current Recommended Short Protection Rated Operating Voltage Rated Current Coil Resistance Solenoid Unit Indicator Weight Energizing Voltage De-energizing Voltage,500N minimum m/sec maximum mm minimum 0N minimum circuit: 0A, circuit: Rated operating voltage (Ue) 30V 5V 50V AC DC AC DC Resistive load (AC) Inductive load (AC5) Resistive load (DC) Inductive load (DC3) Resistive load (AC) Inductive load (AC5) Resistive load (DC) Inductive load (DC3) 0A 0A A 0A 5A 0.9A 0.9A A circuit:.7 mm max., circuit:. mm min. 900 operations/hour,000,000 operations 00,000 operations (rated load) 00A (IEC097-5-) 50V, 0A fuse (Type D0 based on IEC09-, 09-) V DC 5 ma 58Ω (at 0 C) Rated voltage 85% maximum (at 0 C) Rated voltage 0% minimum (at 0 C) Continuous Applicable Voltage Rated voltage 0% Continuous Applicable Duration Insulation Class Rated Operating Voltage Rated Current Light Source Lens Color Not specifically limited Class B V DC 0 ma LED lamp Red or Green ( mm dia. Lens) 0g Ordering Information HSC - R R - R Indicator Color: R (Red), G (Green) Housing Color: R (Red) Solenoid & LED voltage: (V DC) Diagram No. Blank: NC+NC NO/NO : NC+NC NO : NC+NC NC+NC 3: NC+NC NC USA: (800) -IDEC or (08) , Canada: (888) 37-IDEC -39
3 Part Numbers Part Numbers: Body Item Part Number Description Solenoid Unit Part Numbers: Keys, Wrench & Screwdriver Item Part Number Description HSC-RR- HSC with solenoid interlock (V DC) Attached on the right side of the base HS9Z-A Straight Key (ly for sliding doors). Special key wrench (HS9Z-T) for removing the cover and manual unlocking is included with the switch.. Specify the circuit diagram No. in place of. 3. Specify the indicator color (R or G) in place of *.. Order the key separately (not included with the switch). HS9Z-A HS9Z-A3 L-shaped Key (ly for rotating doors) Adjustable Key Diagram No. Blank: NC+NC NO/NO : NC+NC NO : NC+NC NC+NC 3: NC+NC NC HS9Z-T Special Key Wrench (included with switch) Diagrams Diagrams Diagram No. Blank Diagram No. Diagram No. Diagram No Microswitch is linked to solenoid mechanically Solenoid Power 5 + Solenoid Power Microswitch is linked to solenoid mechanically 7 + Microswitch is linked to solenoid mechanically Solenoid Power 5 + Solenoid Power Microswitch is linked to solenoid mechanically USA: (800) -IDEC or (08) , Canada: (888) 37-IDEC
4 Dimensions HSC-RR-* - using the straight key (HS9Z-A) RP R ø5. Conduit Port G/ RP R.7 ø5. Conduit Port G/ 3 0 RP: Mounting Reference Position Cover.5 ± ø Cover -M5 Screws ± ø Mounting Hole Layout HSC-RR-* - using the L-shaped key (HS9Z-A) 30 RP R.7 ø5. Conduit Port G/ RP R ø5. Conduit Port G/ 3 0 Cover Cover RP: Mounting Reference Position 7.5 ± ø ±.0 ø M5 Screws 3.5 Mounting Hole Layout All dimensions in mm. USA: (800) -IDEC or (08) , Canada: (888) 37-IDEC -
5 Accessories Straight Key (mainly for sliding doors) HS9Z-A 7. Key Cover*. -M Tapped Holes weight: g L-Shaped Key (mainly for hinged doors) HS9Z-A R3. -R3. Mounting Holes Key Cover 0 weight: g.5 30 *After installing the key, remove the key cover. 0 Adjustable Key The key angle is adjustable (0 to 0 ) for hinged doors. The minimum radius of the door opening can be as small as 00mm. Stop Film For HS/HS Series (HS9Z-A3) R3. Door Hinge Side 33 max. () Angle Adjustment (M3 Hexagon Socket Head Screw) 0 All dimensions in mm. - USA: (800) -IDEC or (08) , Canada: (888) 37-IDEC
6 Precautions In order to avoid electric shock or a fire, turn the power off before installation, removal, wire connection, maintenance, or inspection of the switch. If relays are used in the circuit between the safety switch and the load, consider degrees of the danger and use safety relays, since welded or sticking contacts of standard relays may invalidate the functions of the safety switch. Interlock Switch Safety Precautions Operation Precautions - for all series Do not place a PLC in the circuit between the safety switch and the load. The safety security can be endangered in the event of a malfunction of the PLC. Do not disassemble or modify the switch. It may cause a breakdown or an accident. Regardless of door types, do not use the safety switch as a door stop. Install a mechanical door stop at the end of the door to protect the safety switch against excessive force. Do not apply an excessive shock to the switch when opening or closing the door. A shock to the door exceeding,000 m/sec (approx. 00G) may cause the contacts of the switch to chatter, and a malfunction of the switch may occur. For connection of wires, unscrew the cover. Unnecessary loosening of other screws may cause a malfunction of the switch. Prevent foreign objects such as dust and liquids from entering the switch while connecting a conduit or wiring. If the operating atmosphere is contaminated, use a protective cover to prevent the entry of foreign objects into the switch through the actuator entry slots. Entry of a considerable amount of foreign objects into the switch may affect the mechanism of the switch and cause a breakdown. Do not store the switches in a dusty, humid, or organic-gas atmosphere. HS5B Precautions For Rotating Head Directions The head of the HS5B can be rotated in 90 increments after removing the screws on the corners of the head. Prevent entry of foreign objects into the switch during removal of the head. Tighten these screws with torque designated in the instruction sheet. Improper torque may cause errors. Initial Position Mounting in 3 Different Positions Minimum Radius of Hinged Doors HS9Z-A5 500mm Minimum Radius 00mm Minimum Radius Door Hinge HSB Precautions Wire Connection The HSB has 3 conduit ports, which are closed as a part of the molded switch housing. Make an opening for wire connection by breaking one of the conduit-port knockouts on the switch housing using a screwdriver. When breaking the conduit port, take care not to damage the contact block or other parts inside the switch. Cracks or burrs on the conduit entry may deteriorate the housing protection against water. When changing to another conduit port, close the unused opening with an optional plug (Type No. HS9Z-P). USA: (800) -IDEC or (08) , Canada: (888) 37-IDEC -3
7 Precautions HSE Precautions Wire Connection Make an opening for wire connection by breaking one of the conduit-port knockouts on the switch housing using a screwdriver. Before breaking the knockout, temporarily remove the connector-fixing lock nut from the switch. When breaking the knockout, take care not to damage the contact block or other parts inside the switch. Cracks or burrs on the conduit entry may deteriorate the housing protection. When changing to the other conduit port, close the unused opening with an optional plug (accessory). Plug Plug (For G/) (For G/) Type Type No. No.: HS9Z-P HS9Z-P. This unlocking method is intended for an escape from a machine when a person is locked in. For access to the unlocking entry, an access hole should be opened on the mounting panel. When opening the hole, apply proper protection against water or other foreign objects.. Caution: After the unlocking operation, put the screw back into the unlocking entry for safety. Screwdriver Lid UNLOCK Normal Position UNLOCK Manual Unlocking Position Manual Unlocking Remove the screw located on the unlocking entry at the side of the switch using the key wrench included with the switch. Then insert a small screwdriver into the switch to push the lever inside of the switch toward the indicator until the actuator is unlocked (refer to the diagram on the right). Insert a small screwdriver into the elliptical hole on the back of the switch, then push the lever inside of the switch toward the indicator until the key is unlocked (refer to the diagram on the right). HSC Precautions Regardless of door type, do not use the safety switch as a locking device. Install a locking device independently, for example, using a metal latch (also applicable to Type HSE). The safety switch cover can be only removed with the special key wrench supplied with the switch or with the optional screwdriver (applicable to HSB and HSE). Remove the screw located on the unlocking entry at the side of the switch using the key wrench included with the switch. Then insert a small screwdriver into the switch to push the lever inside of the switch toward the indicator until the actuator is unlocked (refer to the diagram on the right). Screwdriver Caution: After the unlocking operation, put the screw back into the unlocking entry for safety. - USA: (800) -IDEC or (08) , Canada: (888) 37-IDEC
8 Precautions Operation Precautions Applicable Crimping Terminals (Refer to the Crimping Terminal or shown in the drawing below.) HSC Terminals No. to : Use solid or stranded wires only (crimping terminals not applicable). Terminals No. 7 and 8: Crimping Terminal Ground Terminal: Crimping Terminal HSB Ground Terminal: Crimping Terminal Other Terminals: Crimping Terminal HSB, HS5B, and HSE Crimping Terminal 3. min. 3.5 max. L (mm) ø3. min. Crimping Terminal Use an insulation tube on the crimping terminal. Wire.9 max. Approx. mm Insulation Tube 3.5 min. 3.8 max. L (mm) ø. min. Installation Examples (see the diagrams below) Mounting on Sliding Doors Door HS9Z-A 7. max. Crimping Terminal Crimping Terminal Applicable Connectors (As shown below) Use connectors which maintain the IP7 protection. Applicable Connector Dimensions Flex Conduit: VF03 (Japan Flex) Steel Connector (G/): ALC-03 (PF3.5): RBC-03PG3.5 G/ or PG3.5 9 mm max. Recommended Screw Tightening Torque HSC: 5.0±0.5 N-m (approx. 50±5 kgf-cm) ( or pcs of M5 hex socket head cap screws) HSB: 5.0±0.5 N-m (approx. 50±5 kgf-cm) ( or pcs. of M5 hex socket head cap screws) HSB: 5.0±0.5 N-m (approx. 50±5 kgf-cm) ( pcs of M5 hex socket head cap screws) HS5B:.0±0. N-m (approx. 0± kgf-cm) ( pcs of M hex socket head cap screws) HSE: 5.0±0.5 N-m (approx. 50±5 kgf-cm) ( or pcs of M5 hex socket head cap screws) Key (HS9Z-A/A) 5.0±0.5 N-m (approx. 50±5 kgf cm) ( pcs. of M hex socket head cap screws) Key (HS9Z-A5/A5).0±0. N-m (approx. 0± kgf cm) ( pcs of M hex socket head cap screws).0±0. N-m (approx. 0± kgf cm) ( pcs of M Phillips screws) The screws are supplied by the user. 30 mm max. Door Stop Mounting on Hinged Doors Latch Applicable Wire Size HSC: 0.5 to 0.75 mm (Terminals No.,, 5 to 8).0 to.5 mm (Terminals No.3,, and grounding terminal) HS5B: 0.5 to.5 mm HSE: 0.5 to.5 mm HS9Z-A HS9Z-A USA: (800) -IDEC or (08) , Canada: (888) 37-IDEC -5
HS1E Series Full Size Interlock Switch with Locking Solenoid
HS1E Series HS1E Series Full Size Interlock Switch with Locking Solenoid HS1E Key features include: Basic unit and solenoid unit in one housing Plastic Housing: Light weight Ease of Wiring: All the terminal
More informationDoor Interlock Switches
HSE Series HSE Series Full Size Locking Switches Overview X Series E-Stops HSE features: Basic unit and solenoid unit in one housing Plastic Housing: Light weight Ease of Wiring: All the terminal screws
More informationHS1B R - R. Door Interlock Switches. HS1B Series. HS1B Series Full Size Interlock Switch. Part Number. HS1B features: Part Number Key.
HSB Series HSB Series Full Size Interlock Switch HSB features: Body Rugged aluminum die-cast housing Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded
More informationHS1B Series Full Size Interlock Switch. GS-ET-15 BG standard in Germany. Part Number Key
HSB Series Full Size Interlock Switch HSB features: Rugged aluminum die-cast housing Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded or stuck Available
More informationHS1E Series Full Size Solenoid Locking Switches
HS1E Series Full Size Solenoid Locking Switches AS-Interface Safety at Work Barriers Enabling Switches Door Interlock Switches X Series E-Stops Overview HS1E features: Basic unit and solenoid unit in one
More informationHS6B Series Sub-Miniature Interlock Switch. Direct Opening
HS6 Series HS6 Series Sub-Miniature Interlock Switch HS6 Key features include: Only 30mm x 15mm x 78mm Allows highest level of safety by having 3 contacts: dual load contacts + monitoring contact (ISO13849-1,
More informationHS2B N B - R. Door Interlock Switches. HS2B Series. Full Size Interlock Switch. Part Number. HS2B features: Part Number Key.
HSB Series HSB Series Full Size Interlock Switch HSB features: Body Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded or stuck Available with or without
More informationSafety Products. Safety Products. HS5E Series. HS5E Series Miniature Solenoid Locking Switch
HS5E Series HS5E Series Miniature Solenoid Locking Switch HS5E Key features include: World s smallest 4 contact solenoid interlock switch. (35 40 46 mm.) Four contacts. Gold-plated contacts. Spring lock
More informationHS6B Series Subminiature Interlock Switch
HS6B Series Subminiature Interlock Switch HS6B features: Only 78 x 30 x 15mm Allows highest level of safety by having 3 contacts: dual load contacts + monitoring contact (ISO13849-1, EN954-1) Two actuator
More informationDoor Interlock Switches
HS5B Series HS5B Series Miniature Interlock Switch HS5B features: mm x mm x 9mm Compact Housing Available with Contact Confi gurations (NO + NC or NC) Flexible Installation: By turning the head of the
More informationSolenoid Locking Safety Switches
HSC HSC Full Size Solenoid Locking Switches Key features: Rugged aluminum die-cast housing 00N locking retention force Flexible Installation: The actuator can be accessed from two directions Select from
More informationHS1C Interlock Switches with Solenoid
HSC es with The guard door remains locked until the machine stops completely. With the actuator mounted on the guard door and the interlock switch on the machine, the door is mechanically locked when closed.
More informationHS5E Series Miniature Solenoid Locking Switches
HS5E Series Miniature Solenoid Locking Switches AS-Interface Safety at Work Barriers Enabling Switches Door Interlock Switches X Series E-Stops Overview HS5E features: World s smallest 4 contact solenoid
More informationDoor Interlock Switches
HSE Series HSE Series Miniature Solenoid Locking Switches Overview X Series E-Stops HSE features: World s smallest 4 contact solenoid interlock switch. (3 x 40 x 146 mm) Four contacts Gold-plated contacts
More informationSolenoid Locking Safety Switches
Locking Safety Switches HSE HSE Full Size Locking Switches Key features: Plastic Housing: Lightweight 00N locking retention force Available with a red or green indicator Choose from circuit configurations
More informationHS6E - L 4 4 B 01 - G
HS6E Series HS6E Subminiature Interlock Switches with Solenoid HS6E features: Compact body: 75 15 75 mm 15-mm-wide, thinnest solenoid type interlock switch in the world. Reversible mounting and angled
More informationHS1L Interlock Switches with Solenoid
HS1L Interlock Switches with Solenoid 3000N locking strength (largest in class)! * Suitable for large and heavy doors. Same actuator as HS1E (actuator retention force 3000N) Six contacts in a compact housing
More informationSection. Safety Products Selection Guide...B-2
Section B New New New Selection Guide...B-2 : Door Interlock Switches HS6B Sub-Miniature...........-5 HS5B Miniature...............-8 HS2B Full Size, Molded Plastic.-14 HS1B Full Size, Cast Aluminum..................-18
More informationHS6E Subminiature Interlock Switches with Solenoid. Double Installation. Part Number. Cable Length (+) ( ) A2 A1
HS6E Subminiature Interlock Switches with Solenoid HS6E features: Compact body: 75 15 75 mm 15-mm-wide, thinnest solenoid type interlock switch in the world. Reversible mounting and angled cable allow
More informationHS1C-P Interlock Plug Unit with Door Lock
HSC-P Unit with Lock Interlock plugs with door lock mechanism for high level safety management. Installing the actuator on the guard door and the interlock switch on the machine, the guard door can be
More informationHS1E-K Interlock Switches with Solenoid (3-circuit)
HS1E-K Interlock Switches with Solenoid (-circuit) Dual main circuit + lock monitor circuit provide more safety to your system Basic unit and solenoid unit in one housing Lightweight plastic housing All
More informationHS5E Miniature Interlock Switches with Solenoid
Small interlock switch with four poles and solenoid. Ideal for applications in small spaces. Compact body. 3 40 46 mm. Four-pole internal switches. Gold-plated contacts. Spring lock and solenoid lock types
More informationInterlock Switches. Safety. Selection Guide HS6B Subminiature HS5D Miniature HS2B Full Size...
Safety Selection Guide... 70 HS6B Subminiature... 7 HS5D Miniature... 76 HSB Full Size... 83 HSB Full Size... 87 HS6E Subminiature with Solenoid... 90 HS5E Miniature with Solenoid... 99 HSE Full Size Solenoid
More informationHS1L Interlock Switches with Solenoid
3000N locking strength (largest in class)! * Suitable for large and heavy doors. Same actuators as HS1E (locking strength 3000N) can be used. *As of October 2009, according to IDEC research of plastic
More informationDoor Interlock Switches
HSE Series HSE Series Miniature Solenoid Locking Switches Overview X Series E-Stops HSE features: World s smallest 4 contact solenoid interlock switch. (3 x x 46 mm) Four contacts Gold-plated contacts
More informationStandard Interlock Safety Switches
Subminiature Only 78 x 30 x 1m Two actuator entrances provide flexibility for installation options Integrated molded cable reduces wiring time IP67 (IEC60529) Direct Opening Action Actuators comply with
More informationDoor Interlock Switches
Safety Door Interlock Switches For more information on this product family, visit our website. Additional resources include: New and updated product information Downloadable software demos & upgrades Part
More informationHS1L Interlock Switches with Solenoid
3000N locking strength (strongest* in class)! Suitable for large and heavy doors. Same actuators as HS1E (locking strength 3000N) can be used. Six contacts in a compact housing (same size as HS1E)! Same
More informationHS5D Miniature Interlock Switches
HS5D Miniature Interlock Switches Head Removal Detection Function for Safer Performance Clearwater Tech - Phone: 8094.04 - Fax: 8.368.04 - Web: www.clrwtr.com - Email: info@clrwtr.com New Generation Miniature
More informationHS1E Interlock Swithes with Solenoid
HSE Interlock Swithes with Solenoid Lightweight interlock switch in plastic housing, providing high locking strength Basic unit and solenoid unit in one housing Lightweight plastic housing All terminal
More informationStandard Interlock Safety Switches
Subminiature Interlock Switches Key features: Only 78 x 30 x 1m Two actuator entrances provide flexibility for installation options Integrated molded cable reduces wiring time IP67 (IEC60529) Direct Opening
More informationSG-B1 SERIES / SG-A1 SERIES
643 Door with Solenoid Interlock / Door Ultra-slim SG-B1 SERIES / SG-A1 SERIES Related Information General terms and conditions... F-7 General precautions... P.1501 PHOTO PHOTO Conforming to Machine &
More informationHS5D Miniature Interlock Switches
Head removal detection for safer performance. Head removal detection function turns OFF the main circuit (-) when the head of the is removed. The is the same size as contact interlock switches (HS5B).
More informationpanasonic.net/id/pidsx/global Solve issues related to machine safety and other safety measures with a safety door switch with key!
655 Door with Key SERIES Related Information General terms and conditions... F-7 General precautions... P.50 PHOTO PHOTO Conforming to Machine & EMC Directives Recognition Certified MEASURE ITY panasonic.net/id/pidsx/global
More informationHead Removal Detection Function for Safer Performance
HS5D Miniature Interlock Switches Head Removal Detection Function for Safer Performance (00405) New Generation Miniature Interlock Switches IDEC s new unique Head Removal Detection Function is a new generation
More informationHS5E Miniature Interlock Switches with Solenoid
HS5E Miniature es with Solenoid Small safety switch with four poles and solenoid. Ideal for applications in tight spaces. Compact body. 35 40 146 mm. Rear unlocking button for emergency escape available.
More informationHS6B HS6E. Angled connection. cable. Compact with three poles of contacts. (HS6B) Small interlock switch with five poles and solenoid.
with Solenoid Space saving design with angled connection cable 30mm Angled connection cable 30mm Space Saving (Approx. 30 mm) Manual Unlocking Possible from Three Directions The actuator can be unlocked
More informationHS5E Miniature Interlock Switches with Solenoid
HS5E Miniature es with Solenoid Small safety switch with four poles and solenoid. Ideal for applications in tight spaces. Compact body. 35 40 146 mm. Rear unlocking button for emergency escape available.
More informationct O en n Tr ve Solenoid Indicator (1) TÜV rating AC V, 3A 3 Mounting Examples
Di ct O en n Tr ve m minim m Type Circuit Diagram No. [blank] : NC+NC NO/NO [] : NC+NC NO : NC+NC NC+NC [] : NC NC NC * Type Nos. in [ ] are not supplied as standard. Contact IDEC if required. HSC-KR-G-
More informationHS6E Subminiture Interlock Switches with Solenoid
Small interlock switch with five poles and solenoid. Ideal for applications in tight spaces. Compact body: 75 15 75 mm 15-mm-wide, thinnest solenoid interlock switch in the world. Reversible mounting and
More informationHS6B Subminiature Interlock Switches
World-class compactness with three poles of contacts. World s smallest switch: 30 30 78 mm Dual contacts and monitor contacts achieve the highest safety category (ISO 13849-1, EN 954-1) Two actuator entry
More informationNO NO NO. Standard Interlock Safety Switches HS6B. HS5E-K Key Locking Safety Interlock Switches
Standard Interlock Safety Switches HS6B HS5E-K Key Locking Safety Key features: Head removal detection circuitry. High-security pin tumbler key types are used. Sixteen types of key numbers are available,
More informationSafety device new products line up. Introducing a safety door switch with solenoid interlock that is among the world s thinnest*
Safety device new products line up Introducing a safety door switch with solenoid interlock that is among the world s thinnest* Safety is assured during maintenance! 2013.06 panasonic.net/id/pidsx/global
More informationHinged Safety Door Switch
Hinged Safety Door Switch Polymer housing, IP65, and slow-action contacts with positive opening. Two actuator types are available: Shaft Arm lever Arm lever type can be adjusted to allow a right (180 ),
More informationInterlock Switches Interlock Plugs
TREICHL-ATM Electronic Auf der Bült 0 - D 89 Mönchengladbach Tel. 066 95855 Fax 066 95857 email: atm@treichl.de internet: www.atm-treichl.de es Interlock Plugs HS6B HS6E HS5D HS5E HS5E-K HSC/E HSB/HSB
More informationMiniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
More information2 Specifications and Ratings. Applicable Standards. Operating Condition. Thermal Current Ith 10A Contact Ratings. Operating Speed
INSTRUCTION SHEET HS1L Series Solenoid Type B19071(0) 2 Specifications and Ratings Thank you for purchasing this IDEC product. Confirm that the delivered product is what you have ordered. Read this instruction
More informationSafety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
More informationD4BL. Protective Doors Are Locked Until Machines Completely Stop Operating. Guard Lock Safety-door Switch. Model Number Structure.
Guard Lock Safety-door Switch Protective Doors Are Locked Until Machines Completely Stop Operating A mechanical lock is applied automatically when the Operation Key is inserted. A high level of safety
More informationThink Automation and beyond... IDEC Safety Interlock Switches
Think Automation and beyond... IDEC Safety Interlock Switches This document provided by Barr-Thorp Electric Co., Inc. 800-7-9 IDEC Safety Components Providing reliable, human-machine safety components
More informationDoor Handle Gate System
Door Handle Actuator Overview XW Series E-Stops Key features: Easy and secure operation Rattling doors can be locked smoothly and securely. A door can be locked with an actuator by pushing and turning
More informationDoor Handle Gate System
Door Handle Actuator Key features: Easy and secure operation Rattling doors can be locked smoothly and securely. A door can be locked with an actuator by pushing and turning the handle. Padlock tab is
More informationDL (AZD1) Mini Limit Switches
COMPACT SIZE LIMIT SWITCES DL (1) Mini Limit Switches (with forced contact opening mechanism) An economic compact limit switch equipped with a forced contact opening mechanism and excellent environment
More informationD4DL. Guard Lock Safety-door Switch. Ordering Information. Model Number Legend Switches D4DL- -
Guard Lock Safety-door Switch Polymer housing, IP65, and slow-action contacts with positive opening. 2 versions Mechanical lock/solenoid release Solenoid lock/mechanical release Rotatable operating head
More informationD4DL. Ordering Information. Compact Guard-locking Interlock Safety Door Switch. Model Number Legend Switches D4DL- -
Compact Guard-locking Interlock Safety Door Switch Polymer housing, IP65, and slow-action contacts with positive opening. 2 versions Mechanical lock/solenoid release Solenoid lock/mechanical release Rotatable
More informationHL (AZH) Limit Switches
COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Wide selections of actuators, terminals and bodies to meet any application Excellent environmental resistance Die casting caseiec IP67 Plastic caseiec
More informationHL (AZH) LIMIT SWITCHES
COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount
More informationD4DL. Guard Lock Safety-door Switch. Model Number Structure
Guard Lock Safety-door Switch Two new types added to series: Mechanical-lock models that lock automatically when the Operation Key is inserted, and solenoid-lock models that lock when voltage is applied
More informationPRODUCT SPECIFICATION. Stack Lights. Series.
PRODUCT SPECIFICATION Stack Lights Series www.wernerelektrik.com Light Color Significance... Specifications... Functional Specification... Model Number Structure - Stack Lights... Model Number Selection...
More informationLimit Switch D4D- N. Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark
Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark Features positive opening mechanism (NC contacts only) that opens contacts, thus preventing faulty
More informationManual Reset Limit Switch
Manual Reset Limit Switch A Series of Pull-reset Models Available Ideal for elevators (EN81), escalators (EN115), and conveyors. Positive opening mechanism insulation approved by TÜV and BIA. and double
More informationHS7A-DMC Non-contact Interlock Switches
Non-contact Interlock es Compact size and easy positioning. Combination with proprietary relay modules achieves safety category 4 (EN954-1). Compact size (7 16 51mm) Positioning for installation is easy.
More informationSwitches & Pilot Devices
Key features: Two button sizes: ø29 and ø4mm ead-free, ohs compliant, (EU directive 22/95/EC) Depth behind the panel: Standard - only 27.9mm for 1 to 4 contacts Unibody - only 23.9mm for 1NC or 2NC IDEC
More informationOiltight Switches & Pilot Devices
Oiltight Emergency Stop Stations Part Numbers: Emergency Stop Stations Description Contacts Plastic Bezel Metal Bezel Ø 40mm Pushlock Turn Reset 1NO-1NC HW1X-BV411-R* HW4X-BV411-R* 2NC HW1X-BV402-R* HW4X-BV402-R*
More informationSignaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility
Unique Striped Design Improves Visibility Key features of the LD6A LED SignaLight Towers include: The striped design with non-illuminated area between the lenses makes the illuminated color very visible.
More informationXA Series Emergency Stop Switches (w/removable Contact Block)
XA ø6 XA Series Emergency Stop Switches (w/removable Contact Block) The World s First ø6 mm, 4-contact Emergency Stop Switch. Compact size - only 7.9 mm deep behind the panel. Reliable Safe break action.
More informationApplication Support. Product Information. Omron STI. Support Engineers are available at our USA headquarters from
Omron STI Application Support Thank you for your interest in Omron STI products. Please contact Omron STI with your application questions. Support Engineers are available at our USA headquarters from 4:00
More informationHL (AZH) Limit Switches
COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Compact, high-performance limit switch with superior environmental resistance. Broad lineup covers from die casting cases to economical plastic cases.
More informationD4DS. Compact Interlock Safety Door Switch. Compact Safety Switch Saves Space and is Ideal for a Variety of Doors. Refer to Precautions on page 9.
Compact Interlock Safety Door Switch Compact Safety Switch Saves Space and is Ideal for a Variety of Doors Positive opening mechanism and double insulation approved by TÜV and BIA. Five-direction Operation
More informationD4B-N. uce. Safety Limit Switch. Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications
Safety Limit Switch Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications H Snap-action contact for accurate switching with safe operation via direct drive positive
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (00) 6-0 www.cmafh.com Safety Interlock Switches DSL-N Super Small Class 6-Contact uard Lock Safety-Door Switch
More informationD4BS. Safety-door Switch. Model Number Structure. Switch D4BS - S Operation Key D4BS - K. Ordering Information
Safety-door Switch Safety-door Switch s Special Operation Key Directly Pulls Apart the Contacts from Each Other and Contributes to the Safety of the Production Site Conforms to EN (TÜV) standards corresponding
More informationVL (AZ8) Limit Switches
COMPACT SIZE LIMIT SWITCHES VL (AZ8) Limit Switches A compact and accurate vertical limit switch. Switches with indicator lamp available for convenient maintenance; either a neon AC powered lamp or an
More informationVL (AZ8) Mini Limit Switches
COMPACT SIZE LIMIT SWITCHES VL (AZ8) Mini Limit Switches A compact and accurate vertical limit switch. Type with a lamp which makes maintenance convenient; either a neon AC powered lamp or an LED DC powered
More informationD4BL. Guard Lock Safety-door Switch. Die-cast aluminum body Key holding force of 700 N. Model Number Structure. Model Number Legend Switch D4BL - K
Guard Lock Safety-door Switch D4BL CSM_D4BL_DS_E_10_1 Die-cast aluminum body Key holding force of 700 N Auxiliary release key ensures easy maintenance and unlocks the door in the case of a power failure.
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
Safety Interlock Switches D4S-N D4SN For full product information, visit www.sti.com. Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page. Slim Safety Door Switches with
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-N Series Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N
More informationSafety-door Switch. Ordering Information
Safety-door Switch Safety-door Switch s Special Operation Key Positively Pulls Apart the Contacts from Each Other and Contributes to the Safety of the Production Site Special Operation Key prevents mis-operation.
More informationCTX 3 Control relays Cat. N (s) : /06/09..14/16/19..24/26/29
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 CTX 3 Control relays Cat. N (s) : 4 168 00..04/06/09..14/16/19..24/26/29 CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3.
More informationø8 A8 Series Miniature Control Units
A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationD4JL/D4JL-SK40 CSM_D4JL_D4JL-SK40_DS_E_10_2
Guard Lock Safety-door Switch/Slide key D4JL/D4JL-SK40 CSM_D4JL_D4JL-SK40_DS_E_10_2 Holding Force of 3,000 N Two safety circuits and two monitor contacts provide an array of monitoring patterns. Standard
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-NSeries Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N conforms
More informationD4BS CSM_D4BS_DS_E_8_4
Safety-door Switch CSM DS_E_8_4 The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment
More informationSolenoid interlocks AZM 161 range Schmersal. a 5,5. Pg11/M16x1,5
.1 AZM 11 range Features Thermoplastic enclosure Manual and emergency release Long life Double insulated X High holding force, N N latching force Wiring compartment Actuation on de-energisation or energisation
More informationEnabling Switches. Safety. Selection Guide
Safety Selection Guide... 365 Panel Mount... 366 HE1B Series... 366 HE2B Series... 368 HE3B Series... 371 HE5B Series... 374 HE6B Series... 377 Grip... 380 HE1G Series... 380 HE1G-L Series... 384 HE2G
More informationRelays & Sockets. RR Series Power Relays. Part Number Selection. Key features: Sockets IDEC (4332) USA & Canada
Key features: SPDT through PDT, 0 contacts Midget power type relays vailable in pin and blade terminal styles. Options include an indicator, check button for test operations and side flange. Series Power
More informationLJASeries. Limit Switches with Positive Opening Mechanism
Limit Switches with Positive Opening Mechanism LJASeries Snap action limit switches with positive opening mechanism enables general industrial machines to comply with EC directives and to acquire CE marking.
More informationPRODUCT SPECIFICATION. Foot Switches. Series.
PRODUCT SPECIFICATION Foot 46 Series www.wernerelektrik.com Foot Switch Structures...1 Technical Data...2 Model Number Structure - Foot...3 Dimensions...4 Precautions... Foot WERNERS are Rigorous and tough.
More informationModel Number Structure
Small Sealed Switch D4E-@N Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth snap action
More informationXW Series E-Stops. Safety. Selection Guide ø22mm XW E-Stops
Safety Selection Guide... 288 ø22mm XW E-Stops... 289 www.idec.com/usa/estop XW Series E-Stops Overview Interlock Switches Enabling Switches Safety Control ight Curtains AS-Interface Safety at Work Table
More informationBright illumination face and snap-action switching.
ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree
More informationD4D-N. Safety Limit Switch. Small, Economical Switch Featuring a Positive Opening Mechanism and CE Marking. H Contacts opened by positive opening
Safety Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and CE Marking H Contacts opened by positive opening mechanism (NC contacts only) H Double insulation makes ground terminal
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
Safety Interlock Switches D4JL D4JL For full product information, visit www.sti.com. Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page. uard Lock Safety-Door Switch Holding
More informationSmall Limit Switch D4V
Small Limit Switch DV Compact Vertical Models Sized for Asian Standards Compact new design approximately / the size of OMRON vertical Limit Switches. Structure enables the terminal section to be fully
More informationø12 A2 Series Miniature Control Units
ø2 A2 Series Miniature Control Short 22-mm-long body miniature control unit series with bright LED illumination face and snap-action switching. Degree of protection: IP40 and IP5 (IEC 0529) All series
More informationVL (AZ8) Limit Switches
COMPACT SIZE LIMIT SWITCHES Limit Switches A compact and accurate vertical limit switch. Type with a lamp which makes maintenance convenient; either a neon AC powered lamp or an LED DC powered lamp. With
More informationHEAVY DUTY POWER RELAYS FEATURES
VDE VC HEAVY DUTY POWER RELAYS VC RELAYS Faston terminal Screw terminal mm 9 FEATURES VC power relays are designed for controlling heavy duty loads safely: Contact gap of 3 mm or more -point contacts for
More informationG7S. Ordering Information. Plug-In Safety Relay. Safety Relay for Machine Control Conforms to EN Standard. H Suitable for safety circuits in press
Plug-In Safety Relay Safety Relay for Machine Control Conforms to EN Standard H Suitable for safety circuits in press machinery, machine tools, and other production machinery Do Not Remove H CE mark (conforms
More information22mm XW E-Stops. UL File #E68961 CCC No Specifications
XW Series 22mm XW E-Stops Key features: The depth behind the panel is only 48.7 mm for 1 to 4 contacts (with terminal cover) for illuminated and non-illuminated units. IDEC s original Safe break action
More informationSA1W: Water Detection Sensors
Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com The SA1W is the fastest, most reliable
More information